Blackhawk 20e cTI 60t TI, 20t ARM, 14t TI JTAG Pin Converters Quick Start Guide
Below you will find brief information for JTAG Pin Converters 20e_cTI-60t_TI, JTAG Pin Converters 20e_cTI-20t_ARM, JTAG Pin Converters 20e_cTI-14t_TI. The 20e_cTI-60t_TI Pin Converter is designed to attach an emulator cable with a 20-pin cTI JTAG connection to a target board with 60-pin trace connector, the 20e_cTI-20t_ARM Pin Converter is designed to attach an emulator cable with a 20-pin cTI JTAG connection to a target board with 20-pin MultiICE connector, the 20e_cTI-14t_TI Pin Converter is designed to attach an emulator cable with a 20-pin cTI JTAG connection to a target board with 14-pin connector with pin 6 keyed. This adapter is not intended to be hot pluggable. Unplug power from all sources prior to connect or disconnect.
Advertisement
Advertisement
Advertisement
Key features
- Connects emulator cable with a 20-pin cTI JTAG connection
- Supports target boards with different pin counts
- Designed for use with emulators featuring the new compact TI (cTI) 20-pin JTAG connection
- Ensures proper alignment and pin connections
- Includes a detailed pinout diagram in the documentation
- Not hot pluggable
- Requires unplugging power from all sources before connection or disconnection
- Caution: Pay special attention to orientation and keying during connection
- WARNING: Exercise caution while connecting adapter to JTAG emulator and target JTAG header