Dolby Laboratories Flat Panel LCD - TV Owner`s manual

Add to my manuals
40 Pages

advertisement

Dolby Laboratories Flat Panel LCD - TV Owner`s manual | Manualzz
Model No.
TH-32LRU30
TH-37LRU30
TH-42LRU30
Owner’s Manual
Hospitality LCD HDTV
English
Thank you for purchasing this Panasonic product.
Please read these instructions before operating your set
and retain them for future reference. The images shown in
this manual are for illustrative purposes only.
TQB2AA0623
Experience an amazing level of
multimedia excitement
Enjoy rich multimedia
Camcorder
SD memory card
VCR
Personal computer
Cable box
Amplifier with
Speaker system
DVD Recorder/
Blu-ray Disc recorder
DVD Player/
Blu-ray Disc player
This product incorporates the following software or technology:
(1) the software developed independently by or for Panasonic Corporation,
(2) the software owned by third party and licensed to Panasonic Corporation,
(3) the software developed by the Independent JPEG Group,
(4) the software developed by the FreeType Project.
2
HDMI, the HDMI logo and HighDefinition Multimedia Interface are
trademarks or registered trademarks
of HDMI Licensing LLC in the United
States and other countries.
Contents
SDXC Logo is a trademark of SD3C, LLC.
Please read before using the unit
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
Safety Precautions ········································· 4
Quick Start Guide
Accessories/Optional Accessory ···················· 7
Connections ················································· 10
Identifying Controls ······································ 13
Quick Start
Guide
This product qualifies for ENERGY
STAR in the factory default setting
and this is the setting in which
energy savings will be achieved.
Any modifications to the factory
default setting or other factory
default settings could result in
greater energy consumption beyond
levels that meet ENERGY STAR
qualifications.
Enjoy your TV!
Basic Features
TV operation ················································ 14
Watching Videos and DVDs ························· 15
Displaying PC screen on TV ························ 16
Viewing from an SD card ····························· 18
Viewing
Advanced Features
How to Use Menu Functions ························ 19
Lock ····························································· 22
Editing and Setting Channels ······················· 24
Closed Caption ············································ 26
Input Labels ················································· 27
Guest Menu ················································· 28
Advanced
FAQs, etc.
Ratings List for Lock ···································· 29
Technical Information ··································· 30
FAQ ······························································ 34
Care and Cleaning ······································· 36
Specifications ··············································· 37
Limited Warranty ·········································· 38
FAQs, etc.
3
Safety Precautions
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: To reduce the risk of electric shock, do not remove cover or back.
No user-serviceable parts inside. Refer servicing to qualified service personnel.
The lightning flash with arrowhead
within a triangle is intended to tell the
user that parts inside the product are a
risk of electric shock to persons.
The exclamation point within a
triangle is intended to tell the
user that important operating and
servicing instructions are in the
papers with the appliance.
Note to CATV System Installer
This reminder is provided to direct the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for
proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as
close to the point of cable entry as practical.
Secure Ventilation
Slots and openings in the cabinet and the back or bottom are provided for ventilation, and to ensure reliable operation of the LCD
TV and to protect it from overheating. These openings must not be blocked or covered. There should be at least 10 cm of space
from these openings. The openings should never be blocked by placing the LCD TV on a bed, sofa, rug or other similar surface.
This LCD TV should not be placed in a built-in installation such as a bookcase unless proper ventilation is provided.
Important Safety Instructions
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
12)
13)
14)
15)
16)
17)
18)
4
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that
produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider
than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are
provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and
the point where they exit from the apparatus.
Only use attachments / accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket or table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when moving the cart / apparatus combination to avoid injury
from tip-over.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Operate only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied
to your home consult your television dealer or local power
EXAMPLE OF ANTENNA
company.
GROUNDING AS PER
Follow all warnings and instructions marked on the LCD TV.
(NEC) NATIONAL
Never push objects of any kind into this LCD TV through cabinet
ANTENNA
ELECTRICAL
slots as they may touch dangerous voltage points or short out
LEAD-IN WIRE
CODE
parts that could result in a fire or electric shock. Never spill liquid
GROUND
CLAMP
of any kind on the LCD TV.
ANTENNA
If an outside antenna is connected to the television equipment,
DISCHARGE UNIT
be sure the antenna system is grounded so as to provide some
ELECTRIC
(NEC SECTION 810-20)
SERVICE
protection against voltage surges and built up static charges.
GROUNDING
EQUIPMENT
In the U.S. Section 810-21 of the National Electrical Code
CONDUCTORS
provides information with respect to proper grounding of the mast
(NEC SECTION 810-21)
and supporting structure, grounding of the lead-in wire to an
GROUND CLAMPS
antenna discharge unit, size of grounding conductors, location of
POWER SERVICE GROUNDING
antenna discharge unit, connection to grounding electrodes, and
ELECTRODE SYSTEM
requirements for the grounding electrode.
(NEC ART 250, PART H)
19) An outside antenna system should not be located in the vicinity of overhead power lines, other electric light, power circuits,
or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be
taken to keep from touching such power lines or circuits as contact with them might be fatal.
20) Unplug this LCD TV from the wall outlet and refer servicing to qualified service personnel under the following conditions:
a.
When the power cord or plug is damaged or frayed.
b.
If liquid has been spilled into the LCD TV.
c.
If the LCD TV has been exposed to rain or water.
d.
If the LCD TV does not operate normally by following the operating instructions.
Adjust only those controls that are covered by the operating instructions as improper adjustment of other
controls may result in damage and will often require extensive work by a qualified technician to restore the
LCD TV to normal operation.
e.
If the LCD TV has been dropped or the cabinet has been damaged.
f.
When the LCD TV exhibits a distinct change in performance - this indicates a need for service.
21) When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer that
have the same characteristics as the original parts. Unauthorized substitutions may result in fire, electric shock, or other hazards.
22) WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN,
MOISTURE, DRIPPING OR SPLASHING.
DO NOT PLACE LIQUID CONTAINERS (FLOWER VASES, CUPS, COSMETICS, ETC.) ABOVE THE SET
(INCLUDING ON SHELVES ABOVE, ETC.).
23) WARNING: SMALL PARTS CAN PRESENT CHOKING HAZARD IF ACCIDENTALLY SWALLOWED. KEEP SMALL
PARTS AWAY FROM YOUNG CHILDREN.
DISCARD UNNEEDED SMALL PARTS AND OTHER OBJECTS, INCLUDING PACKAGING MATERIALS
AND PLASTIC BAGS/SHEETS TO PREVENT THEM FROM BEING PLAYED WITH BY YOUNG CHILDREN,
CREATING THE POTENTIAL RISK OF SUFFOCATION.
24) WARNING: To prevent the spread of fire, keep candles or other open flames away from this product at all
times
25) CAUTION: The Power switch on this unit will not completely shut off all power from AC outlet. Since the power
cord serves as the main disconnect device for the unit, you will need to unplug it from the AC outlet to
shut down all power.
Therefore, make sure the unit has been installed so that the power cord can be easily unplugged from AC outlet
in case of an accident. To avoid fire hazard, the power cord should also be unplugged from the AC outlet when
left unused for a long period of time (for example, when on vacation).
26) CAUTION: TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS PLUG WITH A RECEPTACLE OR OTHER OUTLET
UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
27) CAUTION: USE WITH OTHER STAND MAY RESULT IN INSTABILITY POSSIBLY CAUSING INJURY.
28) CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. REPLACE ONLY WITH THE SAME
OR EQUIVALENT TYPE.
29) CAUTION: This LCD TV is for use only with the following optional accessory. Use with any other type of optional
accessories may cause instability which could result in the possibility of injury.
(All of the following accessories are manufactured by Panasonic Corporation)
• Wall-hanging bracket: TY-WK3L2RW
Always be sure to ask a qualified technician to carry out set-up.
NOTE: This equipment is designed to operate in North America and other countries where the broadcasting system and AC
house current are exactly the same as in North America.
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
FCC Caution:
To assure continued compliance, follow the attached installation instructions and use only shielded interface cables
when connecting to computer or peripheral devices. Any changes or modifications not expressly approved by
Panasonic Corp. of North America could void the user’s authority to operate this device.
FCC Declaration of Conformity
Model No. TH-32LRU30, TH-37LRU30, TH-42LRU30
Responsible Party:
Contact Source:
Panasonic Corporation of North America
Three Panasonic Way, 2F-5, Secaucus, NJ 07094
Panasonic Solutions Company
5
Safety Precautions (Continued)
CEA CHILD SAFETY NOTICES: Flat panel displays are not always supported on the proper stands or
installed according to the manufacturer’s recommendations. Flat panel displays that are inappropriately
situated on dressers, bookcases, shelves, desks, speakers, chests or carts may fall over and may cause
personal injury or even death.
The consumer electronics industry (of which Panasonic is a member) is committed to making home
entertainment enjoyable and safe. To prevent personal injury or death, be sure to follow the following safety
guidelines:
TUNE INTO SAFETY:
x
One size does NOT fit all. Follow the manufacturer’s recommendations for the safe installation and use
of your flat panel display.
x
Carefully read and understand all enclosed instructions for proper use of this product.
x
Don’t allow children to climb on or play with furniture and television sets.
x
Don’t place flat panel displays on furniture that can easily be used as steps, such as a chest of drawers.
x
Remember that children can become excited while watching a program, especially on “larger than life”
flat panel displays. Care should be taken to install the display where it cannot be pushed, pulled over,
or knocked down.
x
Care should be taken to route all cords and cables connected to the flat panel display so that they
cannot be pulled or grabbed by curious children.
WALL MOUNTING: IF YOU DECIDE TO WALL MOUNT YOUR FLAT PANEL DISPLAY, ALWAYS:
x
Use a mount that has been recommended by the display manufacturer and/or listed by an independent
laboratory (such as UL, CSA, ETL).
x
Follow all instructions supplied by the display and wall mount manufacturers.
x
If you have any doubts about your ability to safely install your flat panel display, contact your retailer
about professional installation.
x
Make sure the wall where you are mounting the display is appropriate. Some wall mounts are not
designed to be mounted to walls with steel studs or old cinder block construction. If you are unsure,
contact a professional installer.
x
A minimum of two people are required for installation. Flat panel displays can be heavy.
The American Academy of Pediatrics discourages television viewing for children younger than
two years of age.
6
Accessories/Optional Accessory
Accessories
Check you have all the items shown.
Accessories
Remote Control
Transmitter
Batteries for the
Remote Control
Transmitter (2)
N2QAYB000485
Pedestal
TBL2AX0032 (TH-32LRU30)
TBL2AX0048 (TH-37LRU30)
TBL2AX0049 (TH-42LRU30)
AA Battery
Wall-hanging bracket
TY-WK3L2RW
Please contact your nearest Panasonic dealer to purchase the recommended
wall-hanging bracket. For additional details, please refer to the wall-hanging
bracket installation manual.
Screw for fixing the TV onto the
wall-hanging bracket
(not supplied with the TV)
Back of the TV
7.9 ”
(200 mm)
Depth of screw:
Minimum: 0.39” (10.0 mm)
Maximum: 0.47” (12.0 mm)(32”/37”)
1.57” (40.0 mm) (42”)
7.9 ”
(200 mm)
M6
Holes for wall-hanging bracket
installation
WARNING
(View from the side)
Accessories/Optional Accessory
Optional Accessory
Quick Start
Guide
How to assemble (p. 8)
Operating Instructions
Customer assumes liability if mounting the unit themselves or if a Panasonic bracket is not used. Any damage resulting
from not having a professional installer mount your unit will void your warranty.
Always be sure to ask a qualified technician to perform any necessary set-up. Incorrect fitting may cause equipment to
fall, resulting in injury and product damage.
Do not mount the unit directly below ceiling lights (such as spotlights, floodlights or halogen lights) which typically give off
high heat. Doing so may warp or damage plastic cabinet parts.
Take care when fixing wall brackets to the wall. Always ensure that there are no electrical cables or pipes in the wall
before hanging bracket.
When using an angled-type wall hanging bracket, please ensure that there is sufficient space for the connecting cables
so that they do not press against the wall when the TV is tilted forward.
For safety reasons, remove units no longer being used from their wall-mounted locations.
Installing the remote’s batteries
Open
Close
Hook
Note the correct polarity
(+ or -).
Caution
Incorrect installation may cause
battery leakage and corrosion,
resulting in damage to the remote
control.
not mix old and new batteries.
• Do
not mix different battery types (such
• Do
as alkaline and manganese batteries).
not use rechargeable (Ni-Cd)
• Do
batteries.
Do not burn or break batteries.
7
Accessories/Optional Accessory
(Continued)
Attaching the pedestal to TV
Assembling the pedestal
Fix securely with assembly screws A . (Total 4 screws)
Tighten screws firmly.
A
Accessories
Bracket
Assembly screws
(4 of each)
A
Front
XSS4+16FJK
M4 × 16
B
THE2AC004J
M4 × 12
Base
(Image: TBL2AX0032)
Bracket (1)
Set-up
Fix securely with assembly screws
Tighten screws firmly.
. (Total 4 screws)
B
B
Base (1)
Foam mat or thick
soft cloth
WARNING
Do not disassemble or modify the pedestal.
Otherwise the TV may fall over and become damaged, and personal injury may result.
Caution
Do not use any other TV and displays.
Otherwise the TV may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
If you use the pedestal when it is physically damaged, personal injury may result. Contact your nearest Panasonic
Dealer immediately.
During set-up, make sure that all screws are securely tightened.
If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be strong
enough to support the TV, and it might fall over and become damaged, and personal injury may result.
Reference of connection
Antenna terminal
Pin terminals
HDMI terminal
red blue green
green
Firmly tighten by hand.
8
Match colors of plugs and terminals.
Insert firmly.
Insert firmly.
Location
Place the TV at a comfortable distance for viewing. Avoid placing it where sunlight or other bright light (including reflections)
will fall on the screen. Use of some types of fluorescent lighting can reduce remote control transmitter range. Adequate
ventilation is essential to prevent an internal component failure. Keep away from areas of excessive heat or moisture.
Adjust the stand to your desired angle.
The stand angle can be rotate 30°/60°/90° to the right/left. (see Control rotation angle)
[Rotation angle: 60°]
[Rotation angle: 90°]
TH-32LRU30 a: 9.8 ” (248 mm)
b: 7.6 ” (193 mm)
TH-37LRU30 a: 11.0 ” (279 mm)
b: 8.8 ” (222 mm)
TH-42LRU30 a: 12.5 ” (316 mm)
b: 9.8 ” (248 mm)
TH-32LRU30 a: 15.0 ” (381 mm)
b: 12.8 ” (323 mm)
TH-37LRU30 a: 17.1 ” (433 mm)
b: 14.7 ” (373 mm)
TH-42LRU30 a: 19.0 ” (483 mm)
b: 16.5 ” (418 mm)
TH-32LRU30 a: 17.3 ” (439 mm)
b: 14.2 ” (360 mm)
TH-37LRU30 a: 19.7 ” (500 mm)
b: 16.4 ” (416 mm)
TH-42LRU30 a: 21.9 ” (555 mm)
b: 18.4 ” (467 mm)
The rotation angle can be controlled at 30° or 60°.
It is not necessary to attach the screws for the 90° angle rotation.
Temporarily remove the 5 screws shown below.
Attach A screws (2) to each angle control position.
[Bottom view]
[Front of swivel plate]
[Back of swivel plate]
Accessories
A Screws (2)
XSN3+4FJ
M3 × 4
[For 30°]
2
1
B Wood screw (4)
THM2AB001
C Bit (for pedestal) (1)
Swivel plate
5
3
Set-up
[Back of fixed plate]
6.5” (165 mm)
Accessories/Optional Accessory
Control rotation angle
Quick Start
Guide
b
b
b
a
a
a
[Rotation angle: 30°]
4
Use the specialized bit
(supplied) in position a ,
and screw in B wood
screw (2).
[For 60°]
Align the swivel hole in the bottom of the
swivel plate with B wood screw that was
screwed in previously, and place the TV
set onto the swivel plate.
[View from above]
b
0.079” – 0.091”
(2 – 2.3 mm)
6.1” (155 mm)
a
b
Lastly, use the C specialized bit to fix
B Wood screw in place.
5.7” (144 mm)
Slide the TV set forwards until it stops,
then fix it in place.
the TV set in a position where it will not protrude from the table when swiveled.
• Place
Make
sure
there is enough space between the TV set and wall, so that when the TV set is swiveled it does not hit the wall.
•
9
Connections
Connection panel
Side panel
Back panel
RF connection*
10
* For more details on the external equipment’s connections, please refer to the operating manuals for the equipment.
Connecting Antenna
VHF/UHF Antenna
NTSC (National Television System Committee):
Conventional broadcasting
ATSC (Advanced Television Systems Committee):
Digital TV Standards include digital high-definition television (HDTV), standard-definition television (SDTV), data
broadcasting, multichannel surround-sound audio and interactive television.
•
•
AC 110-127 V
60 Hz
VHF/UHF Antenna
Cable TV
Back of the TV
Quick Start
Guide
Power Cord
(Connect after all the
other connections.)
or
Connections
Cable
need to subscribe to a cable TV service to enjoy viewing their programming.
• You
You
enjoy high-definition programming by subscribing to a high-definition cable service.
• The can
connection for high-definition can be done with the use of HDMI or Component Video cable. (see below)
• To view high-definition programming select the correct video input. (p. 15)
Example of connections
To use HDMI terminals
Side panel
Back panel
HDMI
AV OUT
HDMI cable
AV Equipment
e.g. Blu-ray Disc
player
Connecting to the HDMI terminals will enable you to enjoy high-definition digital images and high-quality sound.
The HDMI connection is required for a 1080p signal.
To use COMPONENT terminals
Y
green
green green
blue
blue blue
PB COMPONENT
VIDEO OUT
PR
red
red
red
L
white
red
AUDIO
R OUT
white white
red
AV Equipment
e.g. Blu-ray Disc
player
red
Note
Not all cables and external equipment shown in this book are supplied with the TV.
For more details on the external equipment’s connections, please refer to the operating manual for the equipment.
11
Connections (Continued)
Example of connections
To use COMPOSITE terminals
Side panel
Back panel
AV Equipment
yellow
yellow yellow
white
white white
L
COMPOSITE
OUT
e.g. DVD Recorder
or
R
red
red
red
e.g. VCR
To use AUDIO OUT terminals
Optical digital audio cable
OPTICAL IN
Audio equipment
AUDIO IN
Audio cable
Connect a cable which matches
the audio in terminal on the unit.
To use DATA/MTI terminal
External device
Internal TA
e.g. Game controller
External TA
MTI OUT
Cross Cable
Terminal adapter
To use SERIAL terminal
SERIAL OUT
RS232C cable
External controller
e.g. Bed side controller
To use PC terminal
RGB PC cable
Conversion adapter
(if necessary)
PC
PC OUT
AUDIO OUT
Audio cable
Connect a cable which matches
the audio out terminal on the PC.
12
Note
Not all cables and external equipment shown in this book are supplied with the TV.
For more details on the external equipment’s connections, please refer to the operating manual for the equipment.
Identifying Controls
TV controls/indicators
Front of the TV
Selects channels in sequence
Volume up/down
Menu navigations
POWER button
Power indicator
(on: red, off: no light)
C.A.T.S (Contrast Automatic Tracking System)
Remote control
Closed Caption On/Off (p. 14)
Switches TV On or Off (Standby)
Selects Audio Mode for TV viewing (p. 14)
Changes the input mode (p. 15)
Exits from menu screen
Displays Main Menu (p. 19, 28)
Identifying Controls
Connections
Note
The TV consumes a small amount of electric energy even when turned off.
Do not place any objects between the TV remote control sensor and remote control.
Quick Start
Guide
Changes the input mode
Chooses menu and submenu entries
Remote control sensor
within about 23 feet
(7 meters) in front of the
TV set
Viewing from SD Card (p. 18)
Selects/OK/Change
Colored buttons
(used for various functions)
Returns to previous menu
Channel up/down
Volume up/down
Sound mute On/Off
Displays or removes the channel
banner (p. 14)
Changes aspect ratio (p. 14, 30)
Switches to previously viewed channel
Numeric keypad to select any channel
(p. 14) or press to enter alphanumeric
input in menus
(p. 15, 16, 22, 24, 27)
Use for digital channels. (p. 14)
Use for SD mode operation
: Disable keys
: Not possible when connected to TA
(Online mode)
: For setup mode only
For other Remote control, please refer to the operating manual for it.
13
TV operation
Connections (p. 10-12)
Turn the TV On with the POWER button
(Remote)
(TV)
Input select: press
(p. 15)
or
or
Select a channel number
(Remote)
To directly enter the digital
channel number
up
When tuning to a digital channel,
press the button to enter the
minor number in a compound
channel number.
or
down
(TV)
example: CH15-1:
Note
Reselect “Cable” or “Antenna” in “ANT in” of “ANT/Cable setup” to switch the signal
reception between cable TV and antenna. (p. 25)
The channel number and volume level remain the same even after the TV is turned
off.
Other Useful Functions (Operate after
Listen
with SAP
(Secondary
Audio
Program)
)
Select Audio mode for watching TV
Digital mode
Press SAP to select next audio track (if available) when receiving a digital channel.
Audio track 1 of 2
(English)
Analog mode
Press SAP to select the desired audio mode.
• Each press of SAP will change the audio mode. (Stereo/SAP/Mono)
Switches the Closed caption mode On or Off
Closed
caption
Closed caption Off
Closed caption On
Closed caption On mute
Displays or removes the channel banner
Sleep timer
remaining time
Channel
Information
recall
15-2
ABC-HD
Station
identifier
30
CC
SAP
TV-G 1080i 4:3
Closed SAP
Rating Signal Aspect ratio
caption indication level resolution
Press FORMAT to cycle through the aspect modes (p. 30)
Change
aspect
ratio
14
• 480i, 480p: FULL/JUST/4:3/ZOOM
• 1080p, 1080i, 720p: FULL/H-FILL/JUST/4:3/ZOOM
Watching Videos and DVDs
If you have applicable equipment connected to the TV, you can watch videos and DVDs on the TV screen.
Input Select
You can select the external equipment to access.
With the connected equipment turned On
Display the Input select menu
Select the input mode
Press the corresponding NUMBER
button on the remote control to
select the input of your choice.
Input select
TV
2
HDMI 1
3
HDMI 2
4
HDMI 3
5
Component
6
Video 1
7
Video 2
8
PC
DVD
or
AUX
(example)
HDMI 1
DVD
Terminal
Label
(example)
select
enter
Select the input of your choice,
then press OK.
During the selection, if no action
is taken for several seconds, the
“Input select” menu disappears.
The terminal and label of the
connected equipment are
displayed.
To label each of the inputs,
please refer to p. 27.
Operate the connected equipment using the remote
control supplied with the equipment
Note
For details, see the manual for the connected equipment.
Watching Videos and DVDs
TV operation
Note
The input label will be displayed on the “Input select” screen if the Input label is set
on p. 27.
For more details on “Input labels”, refer to p. 27.
Viewing
1
To return to TV
15
Displaying PC Screen on TV
The screen of the PC connected to the unit can be displayed on the TV.
You can also listen to PC sound with the audio cable connected. To connect PC (p. 12)
Display the Input select menu
Input select
1
TV
2
HDMI 1
3
HDMI 2
4
HDMI 3
5
Component
6
Video 1
7
Video 2
8
PC
DVD
AUX
(example)
Select “PC”
Corresponding signals
(p. 33)
PC
Displays
PC screen
To return to TV
16
/
PC menu setting (change as desired)
Making settings
Menu
“How to Use Menu Functions”
Item
Reset to defaults
Sync
Dot clock
to
(p. 19)
Adjustments/Configurations (options)
Resets PC adjustments. Confirmation screen is displayed. Select “Yes” and press OK to reset.
H & V:
The H and V sync signals are input from the HD/VD connector. (p. 33)
On green: Uses a synchronized signal on the Video G signal, which is input from the
G connector. (p. 33)
Alleviates the problem if a picture appears to be vertically-striped, flickers partially or is blurred.
Adjusts the horizontal position.
H-position
Picture
Adjusts the vertical position.
PC
adjustments
V-position
Clock phase
Alleviates the problem if the whole picture appears to flicker or is blurred.
First adjust the Dot Clock to get the best possible picture, then adjust the
Clock Phase so that a clear picture appears.
Note
It may not be possible to display a clear picture due to poor input signals.
Input
resolution
Switches to wide display.
Input signal switched from 640×480 to 852×480
Input signal switched from 1024×768 to 1280×768 or 1366×768
Displays the H (Horizontal)/V (Vertical) frequencies.
Audio menu (p. 20)
Display range
Horizontal: 15 - 110 kHz
Vertical:
48 - 120 Hz
Viewing
H-frequency
V-frequency
Displaying PC Screen on TV
17
Viewing from an SD card
This function that lets you easily view still images on a television by simply inserting an SD card into the SD card slot.
(Media other than SD Cards will not work.)
Insert the SD card
Insert the card
Gently insert the SD Card label surface facing front.
Remove the card
Label surface
Press in lightly
on SD Card,
then release.
Push until a
click is heard
Cutout
Compliant card type (maximum capacity): SDXC Card (64 GB), SDHC Card (32
GB), microSDHC Card (16 GB), SD Card (2 GB), miniSD Card (2 GB), microSD
Card (2 GB) (requiring microSDHC Card/miniSD Card/microSD Card adapter)
If a microSDHC Card, miniSD Card or microSD Card is used, insert / remove it
together with the adapter.
For cautions and details on SD Cards (p. 31)
Manual operation (“Image viewer auto play” is “Off”)
Display “Photo” (Thumbnail)
Select the data to be viewed
Error display (titles that could not be loaded, etc.)
Media Player
Photos
select
All photos
view
To display/hide the Navigation area
Select
1/48
File name:
p1010001.JPG
Date:
23/10/2009
Size:
1600X1200
SD memory card
OK
RETURN
file number / total file number
Note
Depending on the JPEG format, “Information” contents may not be displayed
correctly. Refer to p. 31 (Data format for SD card browsing) for details.
View
Navigation area
Present status
(While reading the data)
Single view
Accessing
Accessing
Rotate
Press to exit from
a menu screen
Play
Prev.
Pause
Prev.
Next
RETURN
Stop
Accessing
Next
RETURN
Stop
Rotate
Play
Prev.
Single photo view
Next
RETURN
Slideshow
Stop
Press to return to
the previous screen
Displays one at a time
Rotate 90 degrees (counter-clockwise)
To next photo
Stop
To previous photo
To display/hide the Navigation area
18
Return to the Thumbnail view
How to Use Menu Functions
Various menus allow you to make settings for the picture, sound, and other functions so that you can enjoy
watching TV best suited for you.
Guest menu (p. 28)
Display the menu
Menu structure
Menu
Menu bar
Press OK to move to the Menu items.
Input labels
HDMI 1
Menu items
Press OK to proceed to next screen if
available.
HDMI 2
HDMI 3
Component
Video 1
Video 2
PC
Select or enter the name of the device
connected to the HDMI 1 terminal.
Operation guide
RETURN
R Customize label G
Help information
Viewing
Select
Change
B
How to Use Menu Functions
Viewing from an SD card
Shows the functions that can be adjusted.
Some functions will be disabled depending on
the type of input signal.
Y
(example: Input labels)
Select the menu
Menu
Picture
1/2
select
Reset to defaults
Custom
Back light
20
Contrast
0
next
Select the item
Menu
Picture
1/2
select
Reset to defaults
Press to exit from
a menu screen
Picture mode
Custom
Back light
20
Contrast
0
Brightness
0
Color
0
Tint
0
Sharpness
0
Advanced
Picture mode
Resets all picture adjustments to factory
default settings except for “Advanced
picture”.
(example: Picture menu)
Press to return
to the previous
screen
Adjust or select
Menu
Picture
1/2
Reset to defaults
Vivid
Picture mode
Back light
20
Contrast
0
Brightness
0
Color
0
Tint
0
Sharpness
0
adjust
or
select
Selects from preset picture modes.
(example: Picture menu)
19
How to Use Menu Functions
Menu list
Menu
Item
Adjustments/Configurations (alternatives)
Resets all picture adjustments to factory default settings except for “Advanced picture”.
Picture mode
Basic picture mode (Vivid/Standard/Cinema/Custom) (p. 32)
Back light
Adjusts the luminance of the back light.
Contrast, Brightness,
Color, Tint, Sharpness
Adjusts color, brightness, etc. for each picture mode to suit your taste
Display range
Contrast/Brightness/Color/Sharpness: 0 - 100
Tint:
-50 - +50
Color temp.
Selects a choice of Cool (blue), Normal, or Warm (red) color. (Cool/Normal/Warm)
Color mgmt.
On: Enhances green and blue color reproduction, especialy outdoor scenes. (Off/On)
A.I. picture
Controls dark areas without affecting the black level or brightness in the overall picture
(Off/On)
C.A.T.S.
Adjusts the brightness and gradation according to the ambient lighting condition. (Off/On)
Video NR
Reduces noise, commonly called snow. Leave it off when receiving a strong signal. (Off/On)
Aspect
adjustments
Picture
Reset to defaults*
Screen format
Changes the format (aspect ratio). (FULL/H-FILL/JUST/4:3/ZOOM)
Lets you choose the aspect depending on the format of received signal. (p. 30)
H size
Adjusts the horizontal display range to reduce noise of both side edges of an image. (Size 1/Size 2)
Size 2: Adjusts the image size according to the aspect mode for to reduce noise. (p. 32)
PC adjustments
•
Sets PC display (p. 17)
Advanced picture
3D Y/C filter
Minimizes noise and cross-color in the picture. (Off/On)
Color matrix
Selects image resolution of component-connected devices (SD/HD)
SD: Standard Definition
HD: High Definition
Only used with 480p video signal.
MPEG NR
Reduces noise of specific digital signals of DVD, STB, etc. (Off/On)
Black level
Selects Dark or Light. Valid only for external input signals. (Dark/Light)
3:2 pulldown
Adjusts the picture recorded in 24 fps for optimum quality. (Off/On/Auto)
•
•
Reset to defaults*
Resets Bass, Treble, and Balance adjustments to factory default settings.
Bass
Increases or decreases the bass response.
Treble
Increases or decreases the treble response.
Balance
Emphasizes the left / right speaker volume.
Advanced audio
Audio
Surround
Enhances audio response when listening to stereo. (Off/On)
Volume leveler
Minimizes volume disparity after switching to external inputs.
TV speakers
Switches to “Off” when using external speakers (Off/On)
“Surround” and “Volume leveler” do not work if “Off” is selected.
HDMI 1 in
HDMI 2 in
HDMI 3 in
The default setting is “Digital” for the HDMI connection. (Digital input signal)
Select audio input terminal when DVI cable is connected. (Analog audio input signal)
(Digital/Component/Video 1/Video 2)
•
In the AV mode, the Audio and Setup menus give fewer options.
* Confirmation screen is displayed. Select “Yes” and press OK to reset.
20
(Continued)
Menu list
Menu
Timer
Item
Sleep
Lock
Adjustments/Configurations (alternatives)
The TV can automatically turn Off at the designated time (0/15/30/60/90)
Locks the programs. (p. 22)
Closed
caption
Closed caption
Displays subtitles (Closed caption). (p. 26)
ANT/Cable setup
Sets channels. (p. 24)
ECO/energy saving
Selects the terminal and label of the external equipment (p. 27)
Audio out
To prevent howling, stops output of audio specified in this menu. (p. 27) (On/Off)
Power save
Reduces screen brightness to lower power consumption. Eye-friendly for viewing in a dark
room. (Standard/Saving)
No signal for 10
minutes
To conserve energy, the TV automatically turns off when NO SIGNAL and NO OPERATION
continue for more than 10 minutes. (Stay on/Power TV off)
Note
“No signal for 10 minutes was activated” will be displayed for about 10 seconds when
the TV is turned on for the first time after the power was turned off by “No signal for 10
minutes”.
The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes
prior to the shut-off.
•
•
Image viewer
auto play
Set “Thumbnail” to play back SD cards automatically.
(Photos/Off)
••
•
About
Displays TV version and software license.
Reset to defaults
Performing Reset will clear all items set with Setup, such as channel settings.
Advanced
Advanced
setup
No activity for 3
hours
To conserve energy, the TV automatically turns off when no operation of remote and side
panel key continues for more than 3 hours. (Stay on/Power TV off)
Note
Not in use while “PC input” is selected.
“No activity for 3 hours was activated” will be displayed for about 10 seconds when the TV
is turned on for the first time after the power was turned off by “No activity for 3 hours”.
The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes
prior to the shut-off.
How to Use Menu Functions
(picture, sound quality, etc.)
Connected
devices
Setup
Input labels
21
Lock
You can lock specified channels or shows to prevent children from watching objectionable content.
Display the menu
Select “Lock”
Menu
next
Password
Enter password.
- - - -
select
You will be asked to enter your password each time you
display the Lock menu.
Blocks access, with password protection, to
programs.
Input your 4-digit password
A 4-digit code must be entered to view a blocked program or change rating settings.
Menu
Password
Enter password.
* * * -
If it is your first time entering the password, enter the password twice in order to
register it.
Select the Lock mode
Menu
Lock
Mode
On
Program
Off
set
Change password
select
Press to exit from
a menu screen
Off:
On:
Select the item
Menu
Caution
Make a note of your
password in case
you forget it. (If you
have forgotten your
password, consult
your local dealer.)
Note
When you select a
locked channel,
a message will be
displayed that allows
you to view the
channel if you input
your password.
22
Unlocks all the lock settings of “Program”.
Locks all the inputs regardless of the lock settings of “Program”.
Lock
Mode
On
Program
Off
Change password
select
Set
set
To select the channel or the rating of the program to lock
To set a rating level
“V-chip” technology enables restricted shows to lock according to TV ratings.
Select “Mode” and set to “On”
Menu
Program lock
Mode
On
MPAA
Off
U.S.TV
Off
C.E.L.R.
Off
C.F.L.R.
Off
set
select
Select the rating category you wish to follow
Menu
next
Program lock
Mode
On
MPAA
Off
U.S.TV
Off
C.E.L.R.
Off
C.F.L.R.
Off
MPAA:
U.S.TV:
C.E.L.R.:
C.F.L.R.:
U.S. movie ratings
U.S. TV program ratings
Canadian English ratings
Canadian French ratings
select
Program
lock
Select the rating to lock
select
No rating
General Audience: All ages admitted
Parental Guidance Suggested
Parents Strongly Cautioned: Inappropriate for children under 13
Restricted: Under 17 requires accompanying parent or adult guardian
No one 17 and under admitted
Adults only
To get more information (p. 29)
Advanced
NR
G
PG
PG-13
R
NC-17
X
Lock
Example of “MPAA” (U.S. movie ratings)
To change the password
In , select “Change password” and press OK
Input the new 4-digit password twice
Menu
Change
password
Menu
Lock
Mode
Off
Program
Off
Change password
Change password
Enter new password.
- - - -
Note
This television is designed to support the “Downloadable U.S. Region Rating System” when available.
(Available only in U.S.A.)
The Off rating is independent of other ratings.
When placing a lock on a specific-age-based-rating level, the Off rating and any other more restrictive ratings will also
be blocked.
23
Editing and Setting Channels
The current channel settings can be changed according to your needs and reception
conditions.
Display the menu
Auto
program
Set
automatically
Select “Setup”
Menu
Setup
1/2
Ant/Cable Setup
next
Connected devices
ECO/energy saving
select
Advanced setup
About
Reset to defaults
Adjusts Channels, Inputs, and other settings.
Select “ANT/Cable setup”
Menu
Setup
1/2
next
Ant/Cable Setup
Connected devices
ECO/energy saving
select
Advanced setup
About
Reset to defaults
Manual
program
Set
manually
Scans for Antenna or Cable channels.
Specify when using Cable or Satellite box.
Select the function
Menu
ANT/Cable setup
ANT in
Cable
next
Auto program
Manual program
Signal meter
Press to exit from
a menu screen
select
Automatically searches and saves available
channels to memory.
Set
Signal
meter
Check signal
strength
To reset the settings of the Setup menu
Select “Reset to defaults” in the Setup menu ( ) and
press OK
Input your 4-digit password with number buttons
Select “YES” on the confirmation screen and press OK
24
Automatically searches and adds available channels to the memory.
Select “ANT in”
Start scanning the channels
Select “Cable” or “Antenna”
Or select “Not used”.
(Available channels are automatically set.)
Auto program
Select “Auto program”
Menu
Progress
ANT/Cable setup
ANT in
Cable
next
Auto program
8%
Number of analog channels
10
Number of digital channels
0
Press RETURN to quit
Manual program
Signal meter
select
RETURN
After the scanning is completed, select “Apply”.
(see below ).
All previously saved channels are erased.
Use this procedure when changing the channel setup or
changing the channel display.
Also, use this to add or skip channels from the channel list
manually.
Edit
Edit CH caption
Channel
Select “Edit”
80-101
change
@ D---A
Caption
set
OK
Manual program
Edit
Select
Apply
Channel
Caption
...
...
Yes
3
...
...
Yes
4
...
...
Yes
5
...
...
Yes
Add
R
select
next
Edit
Apply
Add
2
...
Yes
3
...
...
Yes
4
...
...
Yes
5
...
Yes
6
...
Yes
...
7
Select
Edit
Yes
Add
Yes
G Next page
B
Apply
Channel
RETURN
R Prev.page
Manual program
Y
• Caption:
Changes the station identifier
• Add:
Adds or skips channels
Cancel
2
Caption
...
...
Yes
3
...
...
Yes
select
Add
Press OK to tune
to the channel.
Select “Apply”
program
Apply
el
Caption
...
Proceed to
next page
Go back to the previous
page
Cancel
select
Add
...
Yes
OK
Advanced
9
Move the cursor to a channel number
next
Yes
...
Caption
...
8
Y
Delete
Caption
select the item
to edit (Caption/
Add)
Cancel
Caption
...
G
B
ABC abc
Select or edit the station identifier.
(maximum 7 characters available)
Add
Press OK to select “Yes (add)” or “No (skip)”
Select the item to edit
Manual program
Channel
RETURN
Cancel
2
or
Editing and Setting Channels
Caption
To cancel the Edit
Manual program
Edit
Channel
Changes will be lost. Continue?
Apply
Cancel
2
Caption
...
...
Yes
3
...
...
Yes
4
...
...
Yes
5
...
...
Yes
No
Yes
Add
select
next
OK
(returns to “ANT/
Cable setup”)
select “Yes”
Check the signal strength if interference is found or freezing occurs on a digital image.
Menu
Signal meter
If the signal is weak, check the antenna.
-Channel
Tune manually
If no problem is found, consult your local dealer.
Signal strength
Current
86%
Peak level
98%
or
Signal intensity
Selects which channel to be tested for signal
strength.
change
channel
OK
Note
Not available if “Cable” is selected in “ANT in” (see above).
Available only for digital antenna channels.
If “Lock” (p. 22) is activated and “ANT/Cable setup” is selected, “Enter password.” will be displayed.
25
Closed Caption
Display the menu
Select “Closed caption”
Menu
Closed caption
Reset to defaults
Mode
next
On
Analog
CC1
Digital
Primary
select
Digital setting
Press to exit from
a menu screen
Display broadcast TV’s Closed Caption (CC)
text when available.
The television includes a built-in decoder that is capable of providing a text display of the audio. The
program being viewed must be transmitting the Closed Caption (CC) information. (p. 30)
Select the item and set
Menu
select
Closed caption
Reset to defaults
Mode
On
Analog
CC1
Digital
Primary
set
Digital setting
Selects style and language for displaying
digital Closed Caption.
The settings in “Analog” or “Digital”
depend on the broadcaster.
On:
To display Closed captions.
CC on mute: To display Closed captions
when the audio is muted.
(when not using, select “Off”).
Analog (Choose the Closed caption service
of Analog broadcasting.)
CC1-4: Information related to pictures
(Appears at the bottom of the screen)
Mode
T1-4:
Textual information
(Appears over the entire screen)
(The Digital Closed caption menu lets
you configure the way you choose to
view the digital captioning.)
Select the setting.
“Primary”, “Second.”, “Service 3”, “Service 4”,
“Service 5”, “Service 6”
Digital
Closed caption
Display
Closed
caption
To make more in-depth display settings in digital programs
Select “Digital setting” and press OK
Select the item and set
Menu
Digital setting
Size
Small
Font
Default
Style
None
Foreground
Black
Fore. opacity
Solid
Background
Black
Back. opacity
Solid
Outline
Black
Selects the text size.
select
Size
Text size
set
Font
Text font
Style
Text style (Raised, Depressed, etc.)
Foreground Color of text
Fore. opacity Opacity of text
Background Color of text box
Back. opacity Opacity of text box
Outline
Outline color of text (Identify the
setting options on the screen.)
To reset the settings
Select “Reset to defaults”. Confirmation screen is displayed.
Select “Yes” and press OK.
26
Input Labels
Display the menu
Select “Setup”
Menu
Setup
next
1/2
Ant/Cable Setup
Connected devices
ECO/energy saving
Advanced setup
select
About
Reset to defaults
Adjusts Channels, Inputs, and other settings.
Select “Connected devices”
Menu
Setup
next
1/2
Ant/Cable Setup
Connected devices
ECO/energy saving
Advanced setup
Input Labels
Closed Caption
select
About
Reset to defaults
Customize TV inputs with the names of your
connected devices. For easier input
selections.
Select “Input labels” or “Audio out”
Press to exit from
a menu screen
next
Connected devices
Input labels
Audio out
select
Select the terminal and label of the external equipment
Menu
Input labels
select
HDMI 1
HDMI 2
set
HDMI 3
HDMI 3
PC
or
Select if a computer is connected to the
TV’s PC input.
Component
Input labels
Display
labels of
Connected
devices
Video 1
1 @. 2 ABC 3 DEF
4 GHI 5 JKL 6 MNO
7PQRS 8 TUV 9WXYZ
LAST 0 - ,
OK
Video 2
Select
PC
R
Terminal
Video 1
VCR
[example]
RETURN
G ABC
abc
B
Y Delete
Follow the instructions on screen to
complete the following operations.
Select or enter the name of the device
connected to the HDMI 1 terminal.
Label
@AD
Advanced
Devices connected to external input terminals can be labeled for easier identification during the
input selection. (In selecting the input mode from p. 15 )
Terminals: HDMI 1-3/Component/Video 1-2/PC
Label: [BLANK] Not used/Blu-ray/DVD/DVD REC/HOME THTR/
GAME/COMPUTER/VCR/CABLE/SATELLITE/DVR/CAMERA/
MONITOR/AUX/RECEIVER/MEDIA CTR/MEDIA EXT/OTHER
For the PC terminal, only “Not used” is available.
If “Not used” is selected, the INPUT button press will skip its input.
Each selected label will be displayed on the “Input select” screen. (p. 15)
To prevent howling, stops output of audio specified in this menu. (p. 21)
Select the terminal and set “Off”
Audio out
Audio out
Stop output
of the audio
select
HDMI 1
On
HDMI 2
On
HDMI 3
On
Component
On
Video 1
Off
Video 2
On
Video 3
On
set
27
Guest Menu
Display the menu
Shows the functions that can be adjusted.
Some functions will be disabled depending on
the type of input signal.
Select the item
select
Menu
FULL
Screen format
Audio mode
Audio track 1 of 2 (English)
Sleep (minutes)
0
Lock
Closed caption
Input select
SD card
Adjust or select
Menu
FULL
Screen format
Audio mode
Audio track 2 of 2 (Spanish)
Sleep (minutes)
adjust
or
select
0
Lock
Press to exit from
a menu screen
Closed caption
Input select
SD card
Guest menu
Item
28
Adjustments/Configurations (alternatives)
Screen format
Changes the format (aspect ratio). (FULL/H-FILL/JUST/4:3/ZOOM)
Lets you choose the aspect depending on the format of received signal. (p. 30)
Audio mode
Select Audio mode (p. 14)
Sleep (minutes)
The TV can automatically turn Off at the designated time (0/15/30/60/90)
Lock
Locks the programs. (p. 22)
Closed caption
Displays subtitles (Closed caption). (p. 26)
Input select
Select Input (p. 15)
SD card
Displays Photo viewer (p. 18)
Ratings List for Lock
“V-chip” technology enables you to lock channels or shows according to standard ratings set by the
entertainment industry. (p. 23)
U.S. MOVIE RATINGS (MPAA)
NR
G
PG
PG-13
R
NC-17
X
NO RATING (NOT RATED) AND NA (NOT APPLICABLE) PROGRAMS. Movie which has not been rated or
where rating does not apply.
GENERAL AUDIENCES. All ages admitted.
PARENTAL GUIDANCE SUGGESTED. Some material may not be suitable for children.
PARENTS STRONGLY CAUTIONED. Some material may be inappropriate for children under 13.
RESTRICTED. Under 17 requires accompanying parent or adult guardian.
NO ONE 17 AND UNDER ADMITTED.
ADULTS ONLY.
U.S. TV PROGRAMS RATINGS (U. S. TV)
Age-based
Group
NR
(Not Rated)
Age-based
Ratings
TV-NR
TV-Y
TV-Y7
TV-G
TV-PG
Guidance
TV-14
TV-MA
Description
Not Rated.
All children. The themes and elements in this program are specifically
designed for a very young audience, including children from ages 2-6.
Directed to older children. Themes and elements in this program may
include mild physical or comedic violence, or may frighten children
under the age of 7.
General audience. It contains little or no violence, no strong language,
and little or no sexual dialogue or situations.
Parental guidance suggested. The program may contain infrequent
coarse language, limited violence, some suggestive sexual dialogue
and situations.
Parents strongly cautioned. This program may contain sophisticated
themes, sexual content, strong language and more intense violence.
Mature audiences only. This program may contain mature themes,
profane language, graphic violence, and explicit sexual content.
CANADIAN ENGLISH RATINGS (C. E. L. R.)
C
C8+
G
PG
14+
CANADIAN FRENCH RATINGS (C. F. L. R.)
E
G
8 ans+
13 ans+
16 ans+
18 ans+
Exempt - Exempt programming.
General - Programming intended for audience of all ages. Contains no violence, or the violence content is
minimal or is depicted appropriately.
8+ General - Not recommended for young children. Programming intended for a broad audience but contains
light or occasional violence. Adult supervision recommended.
Programming may not be suitable for children under the age of 13 - Contains either a few violent scenes or
one or more sufficiently violent scenes to affect them. Adult supervision strongly suggested.
Programming may not be suitable for children under the age of 16 - Contains frequent scenes of violence or
intense violence.
Programming restricted to adults. Contains constant violence or scenes of extreme violence.
FAQs, etc.
18+
Exempt - Exempt programming includes: news, sports, documentaries and other information programming,
talk shows, music videos, and variety programming.
Programming intended for children under age 8. No offensive language, nudity or sexual content.
Programming generally considered acceptable for children 8 years and over. No profanity, nudity or sexual content.
General programming, suitable for all audiences.
Parental Guidance suggested. Some material may not be suitable for children.
Programming contains themes or content which may not be suitable for viewers under the age of 14. Parents
are strongly cautioned to exercise discretion in permitting viewing by pre-teens and early teens.
18+ years old. Programming restricted to adults. Contains constant violence or scenes of extreme violence.
Advanced
FV: Fantasy/Cartoon Violence. V: Violence S: Sex L: Offensive Language D: Dialogue with sexual content.
E
Ratings List for Lock
Guest Menu
Youth
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Possible Content
Selections
Viewable
Blocked
Viewable
Blocked
FV Blocked
Viewable
Blocked
Viewable
Blocked
D,L,S,V (all selected)
Any combination of
D, L, S, V
D,L,S,V (all selected)
Any combination of
D, L, S, V
L,S,V (all selected)
Any combination of
L, S, V
Caution
The V-Chip system that is used in this set is capable of blocking “NR” programs (non rated, not applicable and none) as
per FCC Rules Section15.120(e)(2). If the option of blocking “NR” programs is chosen “unexpected and possibly confusing
results may occur, and you may not receive emergency bulletins or any of the following types of programming:”
• Emergency Bulletins (Such as EAS messages, weather warnings and others)
• Locally originated programming • News • Political • Public Service Announcements • Religious • Sports • Weather
29
Technical Information
Closed caption (CC)
For viewing the CC of digital broadcasting, set the aspect to FULL (If viewing with H-FILL, JUST, ZOOM or 4:3;
characters might be cut off).
The CC can be displayed on the TV if the receiver (such as a set-top box or satellite receiver) has the CC set On
using the Component or HDMI connection to the TV.
If the CC is set to On on both the receiver and TV when the signal is 480i (except for the HDMI connection), the CC
may overlap on the TV.
If a digital program is being output in analog format, the CC data will also be output in analog format.
If the recorder or output monitor is connected to the TV, the CC needs to be set up on the recorder or output monitor.
EIA-708 is the standard for closed captioning for ATSC digital television streams in the United States and Canada.
EIA-608, also known as line 21 captions, used to be the standard for closed captioning for NTSC TV broadcasts in the
United States and Canada.
Aspect Ratio (FORMAT)
Press the FORMAT button to cycle through the aspect modes. This lets you choose the aspect depending on the format
of the received signal and your preference. (p. 14)
(e.g.: in case of 4:3 image)
FULL
JUST
JUST
FULL
Enlarges the 4:3 image horizontally to the screen’s side edges. Stretches to justify the 4:3 image to the four corners of the
(Recommended for anamorphic picture)
screen.
(Recommended for normal TV broadcast)
H-FILL
4:3
H-FILL
Side bar
Enlarges the 4:3 image horizontally to the screen’s side
edges. The side edges of the image are cut off.
Standard
(Note that “Image retention” of the side bar may occur from
displaying it for a long time.)
ZOOM
Note
ZOOM
480i (4:3), 480i (16:9), 480p (4:3), 480p (16:9):
FULL, JUST, 4:3 or ZOOM
1080p / 1080i / 720p:
FULL, H-FILL, JUST, 4:3 or ZOOM
Enlarges the 4:3 image to the entire screen.
(Recommended for Letter Box)
Zoom adjustments
Vertical image position and size can be adjusted in “ZOOM”.
Select “Zoom adjustments” on the “Picture” menu. (p. 20)
V-position: Vertical position adjustment
To reset the aspect ratio
30
(OK)
V-size: Vertical size adjustment
Data format for SD Card browsing
Photo:
Still images recorded with digital still cameras compatible with JPEG files of DCF* and EXIF**
standards
Data format:
Baseline JPEG (Sub-sampling: 4:4:4, 4:2:2 or 4:2:0)
Max. number of files:
9,999
Image resolution:
160 x 120 to 20,000,000
* DCF (Design rule for camera file system): A Japan Electronics and Information Technology Industries Association’s standard
** EXIF (Exchangeable Image File Format)
Caution
A JPEG image modified with a PC may not be displayed.
Partly degraded files might be displayed at a reduced resolution.
Note
Folder structure viewed in PC
Created automatically
DCIM
100_PANA
P1000001.JPG
P1000002.JPG
P1000003.JPG
P1000004.JPG
3-digit folder number + 5-digit arbitrary characters
4-digit arbitrary characters + 4-digit file number
Usable characters: 1-byte “a to z”, “A to Z”, “0 to 9,” and “_”
The folder and file names may be different depending on the digital camera used.
For the suitable SD Memory Cards, please confirm the latest information on the following website.
http://panasonic.jp/support/global/cs (This site is in English only)
Cautions in handling SD Card:
32 mm
mm
2.1
24 mm
Technical Information
Use an SD Card which meets SD standards. If not, it may cause the TV to malfunction.
Do not remove the card while the unit is accessing data (this can damage card or unit).
Do not touch the terminals on the back of the card.
Do not subject the card to high pressure or impact.
Insert the card in the correct direction (otherwise, card or unit may be damaged).
Electrical interference, static electricity or erroneous operation may damage the data or card.
Back up the recorded data at regular intervals in case of deteriorated or damaged data or
erratic operation of the unit. (Panasonic is not liable for any deterioration or damage of recorded data.)
SD Card warning messages
Meaning
Please insert SD memory card into
the SD slot at the side of the TV.
The card is not inserted.
No photos
The card has no data or this type of data is not supported.
Cannot read file
The file is broken or unreadable.
The TV does not support the format.
FAQs, etc.
Message
31
Technical Information (Continued)
HDMI connection
HDMI (high-definition multimedia interface) allows you to enjoy high-definition digital images and high-quality sound by
connecting the TV unit and the devices.
HDMI-compatible equipment (*1) with an HDMI or DVI output terminal, such as a set-top box or a DVD player, can be connected
to the HDMI connector using an HDMI compliant (fully wired) cable.
HDMI is the world’s first complete digital consumer AV interface complying with a non-compression standard.
If the external equipment has only a DVI output, connect to the HDMI terminal via a DVI to HDMI adapter cable (*2).
When the DVI to HDMI adapter cable is used, connect the audio cable to the audio input terminal.
Audio settings can be made on the “HDMI 1 in”, “HDMI 2 in” or “HDMI 3 in” menu screen. (p. 20)
Applicable audio signal sampling frequencies (L.PCM): 48 kHz, 44.1 kHz, 32 kHz
(*1): The HDMI logo is displayed on an HDMI-compliant device.
(*2): Enquire at your local digital equipment retailer shop.
Caution
Use with a PC is not assumed.
All signals are reformatted before being displayed on the screen.
If the connected device has an aspect adjustment function, set the aspect ratio to “16:9”.
These HDMI connectors are “type A”.
These HDMI connectors are compatible with HDCP (High-Bandwidth Digital Content Protection) copyright protection.
A device having no digital output terminal may be connected to the input terminal of either “COMPONENT” or “VIDEO” to
receive analog signals.
The HDMI input terminal can be used with only the following image signals: 480i, 480p, 720p, 1080i, 1080p.
Match the output setting of the digital device.
For details of the applicable HDMI signals, see p. 33.
DIGITAL AUDIO OUT terminals
You can enjoy your Home theater by connecting a Dolby Digital (5.1 channel) decoder and “Multi Channel” amplifier to the
DIGITAL AUDIO OUT terminals.
Caution
Depending on your DVD player and DVD-Audio software the copyright protection function may operate and disable optical output.
When an ATSC channel is selected, the output from the DIGITAL AUDIO OUT jack will be Dolby Digital. When an NTSC
channel is selected, the output will be PCM.
Picture mode
Vivid:
Standard:
Cinema:
Custom (Photo):
Provides enhanced picture contrast and sharpness for viewing in a well-lit room.
Recommended for normal viewing conditions with subdued room lighting.
For watching movies in a darkened room. It provides a soft, film-like picture.
Customizes each item according to your taste.
Photo is displayed in JPEG menu.
H size
Aspect Ratio: 4:3
Size 1
Size 2
The width will be decreased on both sides to
reduce noise.
Aspect Ratio: FULL/JUST(H-FILL/ZOOM)
Size 1
See page 20 for more information
32
Size 2
The width will be increased on both sides to
reduce noise.
Input signal that can be displayed
* Mark: Applicable input signal for Component (Y, PB, PR), HDMI and PC
525 (480) / 60i
525 (480) /60p
750 (720) /60p
1,125 (1,080) /60i
1,125 (1,080)/60p
1,125 (1,080)/60p
1,125(1,080)/24p
1,125(1,080)/24p
640 × 400 @70
640 × 480 @60
Macintosh13” (640 × 480)
640 × 480 @75
852 × 480 @60
800 × 600 @60
800 × 600 @75
800 × 600 @85
Macintosh16” (832 × 624)
1,024 × 768 @60
1,024 × 768 @70
1,024 × 768 @75
1,024 × 768 @85
Macintosh 21” (1,152 × 870)
1,280 × 768 @60
1,280 × 1,024 @60
1,366 × 768 @60
horizontal frequency (kHz)
15.73
31.47
45.00
33.75
67.43
67.50
26.97
27.00
31.47
31.47
35.00
37.50
31.44
37.88
46.88
53.67
49.73
48.36
56.48
60.02
68.68
68.68
47.78
63.98
48.39
vertical frequency (Hz)
59.94
59.94
59.94
59.94
59.94
60.00
23.98
24.00
70.08
59.94
66.67
75.00
59.89
60.32
75.00
85.08
74.55
60.00
70.07
75.03
85.00
75.06
59.87
60.02
60.04
COMPONENT
HDMI
*
*
*
*
*
*
*
*
*
*
*
*
PC
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
Signals other than above may not be displayed properly.
The above signals are reformatted for optimal viewing on your display.
PC Input Terminals Connection
Computer signals which can be input are those with a horizontal scanning frequency of 15 to 110 kHz and vertical scanning
frequency of 48 to 120 Hz. (However, the image will not be displayed properly if the signals exceed 1,200 lines.)
Some PC models cannot be connected to the set.
There is no need to use an adapter for computers with IBM PC/AT compatible D-sub 15P terminal.
The maximum resolution: 1,280 × 1,024
If the display resolution exceeds these maximums, it may not be possible to show fine detail with sufficient clarity.
Signal Names for D-sub 15P Connector
6
7
1
8
2
9 10
3
4
5
Pin Layout for PC Input Terminal
Signal Name
R
G
B
NC (not connected)
GND (Ground)
Pin No.
Signal Name
GND (Ground)
GND (Ground)
GND (Ground)
NC (not connected)
GND (Ground)
Pin No.
Signal Name
NC (not connected)
NC
HD/SYNC
VD
NC
FAQs, etc.
Pin No.
11 12 13 14 15
Technical Information
Note
33
FAQ
Before requesting service or assistance, please follow these simple guides to resolve the problem.
If the problem still persists, please contact your local Panasonic dealer or Panasonic Service Center for assistance.
White spots or
shadow images
(noise)
Check the position, direction,
and connection of the antenna.
Interference or
frozen digital
channels
(intermittent sound)
Change the direction of antenna for
digital channels.
Check “Signal meter” (p. 25).
If the signal is weak, check the
antenna and consult your local
dealer.
The LCD panel moves
slightly when it is
pushed with a finger.
A clattering sound
might be heard
This is not a malfunction.
There is some looseness around
the panel to prevent damage to the
panel.
34
Pictures from external
equipment are distorted when
the unit is connected via HDMI
Is the HDMI cable connected properly?
Turn Off the TV unit and equipment, then
turn them On again.
Check an input signal from the equipment.
(p. 33)
Use equipment compliant with
EIA/CEA-861/861B.
When the channel is changed on
an STB that is connected with
HDMI, “HDMI” may be displayed
on the top left of the screen
This is not a malfunction.
Recording does not
start immediately
Check the settings of the recorder. For
details, read the manual of the recorder.
The remote control does
not work
Are the batteries installed correctly? (p. 7)
Are the batteries new?
If there is a problem with your TV, please refer to the table below to determine the symptoms, then carry out the
suggested check. If this does not solve the problem, please contact your local Panasonic dealer, quoting the model
number and serial number (both found on the rear of the TV).
Problem
Actions
Screen
Check nearby electrical products.
(car or motorcycle ignition systems, fluorescent lamp, etc.)
No image is
displayed on screen
Check Picture menu (p. 20)
Check the cable connections.
Check that the correct input has been selected.
Only spots are displayed
instead of images
Check the channel settings. (p. 24)
Check the antenna cables.
Neither image nor
sound is produced
Is the power cord plugged into the outlet?
Is the TV unit turned On?
Check Picture menu (p. 20) and volume.
Check the AV cable connections. (p. 11-12)
Check that the correct input has been selected. (p. 15)
Black Box appears
Change settings of Closed caption (CC). (p. 26)
No sound is produced
Are the speakers’ cables connected correctly?
Is “Sound Mute” active? (p. 13)
Is the volume set to the minimum?
Is “TV speakers” set to “Off”? (p. 20)
Change “SAP” settings. (p. 14)
Check “HDMI 1 in”, “HDMI 2 in” or “HDMI 3 in” settings.
(p. 20)
Sound is unusual
Set “SAP” setting to “Stereo” or “Mono”.
Check the HDMI device connected to the unit.
Set the audio setting of the HDMI device to
“Linear PCM”.
If digital sound connection has a problem,
select analog sound connection.
Unknown sound heard
1- Sounds from TV
cabinet
2- Tick/Click sound
3- Buzzing sound
Other
The main unit is hot.
1- Changes in the temperature and humidity of the room may cause
the TV’s cabinet to expand or contract and produce metallic
sounds. This is not a sign of faulty operation or a malfunction.
2- When the TV is powered on, an electrical component in the
TV activates producing a tick/click sound. This is not a sign of
faulty operation or a malfunction.
3- Electrical circuits are active while the TV set is on.
This is not a sign of faulty operation or a malfunction.
FAQs, etc.
Chaotic image, noisy
Frequently Asked Questions
Sound
Some spots remain
bright or dark
The LCD panel is made up of a few million pixels and is
produced with advanced technology through an intricate
process. Sometimes a few pixels may be bright or dark.
These pixels do not indicate a defective panel and will
have no impact on the performance of the TV.
The main unit radiates heat and some of the parts may
become hot. This is not a problem for performance or
quality.
Set up in a location with good ventilation.
Do not cover the ventilation holes of the TV with a tablecloth,
etc., and do not place on top of other equipment.
35
Care and Cleaning
First, unplug the Power cord plug from the wall outlet.
Display panel
The front of the display panel has been specially treated. Wipe the panel surface gently using only a cleaning cloth or a soft,
lintfree cloth.
If the surface is particularly dirty, soak a soft, lint-free cloth in diluted mild liquid dish soap (1 part mild liquid dish soap diluted
by 100 times the amount of water) and then wring the cloth to remove excess liquid. Use this cloth to wipe the surface of the
display panel, then wipe it evenly with a dry cloth of the same type until the surface is dry.
Do not scratch or hit the surface of the panel with fingernails or other hard objects. Furthermore, avoid contact with volatile
substances such as insect sprays, solvents, and thinner; otherwise, the quality of the surface may be adversely affected.
Cabinet
If the cabinet becomes dirty, wipe it with a soft, dry cloth.
If the cabinet is particularly dirty, soak the cloth in a weak mild liquid dish soap and then wring the cloth dry. Use this cloth to
wipe the cabinet and then wipe it dry with a dry cloth.
Do not allow any mild liquid dish soap to come into direct contact with the surface of the LCD TV.
If water droplets get inside the unit, operating problems may result.
Avoid contact with volatile substances such as insect sprays, solvents, and thinner; otherwise, the quality of the cabinet
surface may be adversely affected or the coating may peel off. Furthermore, do not leave it for long periods in contact with
articles made from rubber or PVC.
Pedestal
Cleaning
Wipe the surfaces with a soft, dry cloth. If the unit is particularly dirty, clean it using a cloth soaked with water to which a small
amount of mild liquid dish soap has been added and then wipe with a dry cloth.
Do not use products such as solvents, thinner, or household wax for cleaning, as they can damage the surface coating.
(If using a chemically-treated cloth, follow the instructions supplied with the cloth.)
Do not attach sticky tape or labels, as they can make the surface of the pedestal dirty. Do not allow long-term contact with
rubber, vinyl products, or the like. (Doing so will cause deterioration.)
Power cord plug
Wipe the plug with a dry cloth at regular intervals. (Moisture and dust can lead to fire or electrical shock.)
36
Specifications
TH-32LRU30
Power Source
TH-37LRU30
TH-42LRU30
AC 110-127 V, 60 Hz
Power
Consumption
Rated Power
Consumption
106 W
159 W
206 W
Standby condition
0.8 W
0.8 W
0.9 W
Display panel
Aspect Ratio
37” class
(37.0 inches measured diagonally)
32.2 ” × 18.1 ” × 37.0 ”
(819 mm × 460 mm × 940 mm)
42” class
(42.0 inches measured diagonally)
36.6 ” × 20.6 ” × 42.0 ”
(930 mm × 523 mm × 1, 067 mm)
Sound
Speaker
16:9
32” class
(31.5 inches measured diagonally)
27.5 ” × 15.4 ” × 31.5 ”
(698 mm × 392 mm × 800 mm)
1,049,088 (1,366 (W) ×
768 (H)) [4,098 × 768 dots]
1-way 2 bottom SP System
Visible screen size
(W × H × Diagonal)
(No. of pixels)
Audio Output
PC signals
Channel CapabilityATSC/NTSC (Digital/Analog)
2,073,600 (1,920 (W) × 1,080(H)) [5,760 × 1,080 dots]
20 W [10 W + 10 W] (10 % THD)
VGA, SVGA, XGA, WXGA, SXGA
Horizontal scanning frequency 31 - 69 kHz
Vertical scanning frequency 59 - 86 Hz
VHF/ UHF: 2 - 69, CATV: 1 - 135 (support MPEG4 H.264 decode)
Card slot
SD CARD slot × 1
DIGITAL AUDIO OUT
Including TV stand
PCM / Dolby Digital, Fiber Optic
3D Y/C FILTER, CLOSED CAPTION,
V-Chip, Vesa compatible, Integrated Pro: Idiom
36.1 ” × 24.5 ” × 12.1 ”
31.5 ” × 21.8 ” × 10.8 ”
(798 mm × 553 mm × 272 mm) (915 mm × 622 mm × 307 mm)
31.5 ” × 20.2 ” × 3.3 ”
36.1 ” × 22.8 ” × 3.5 ”
(798 mm × 511 mm × 83 mm) (915 mm × 577 mm × 87 mm)
37.3 lb. (16.9 ) NET
27.6 lb. (12.5 ) NET
40.2 ” × 26.9 ” × 12.6 ”
(1, 021 mm × 682 mm × 318 mm)
40.2 ” × 25.1 ” × 4.2 ”
(1, 021 mm × 637 mm × 105 mm)
47.7 lb. (21.6 ) NET
TV Set only
21.0 lb. (9.5
38.6 lb. (17.5
COMPONENT IN
Connection Terminals
HDMI 1-3
PC
SERIAL CTRL
DATA/MTI
FEATURES
TV Set only
[TH-32LRU30]
36.1 ” (915 mm)
8.6 ”
(217 mm)
10.8 ”
(272 mm)
) NET
) NET
[TH-42LRU30]
3.5 ”
(87 mm)
24.5 ” (622 mm)
22.8 ” (577 mm)
14.2 ”
(359 mm)
Note
29.1 lb. (13.2
[TH-37LRU30]
3.3 ”
(83 mm)
21.8 ” (553 mm)
20.2 ” (511 mm)
31.5 ” (798 mm)
) NET
40.2 ” (1,021 mm)
FAQs, etc.
Dimensions Mass
(W × H × D)
Including TV stand
•
••
4.2 ”
(105 mm)
26.9 ” (682 mm)
25.1 ” (637 mm)
VIDEO IN 1-2
Specifications
Care and Cleaning
Audio out
Temperature:
32 °F – 95 °F (0 °C – 35°C)
Humidity: 20 % – 80 % RH (non-condensing)
VIDEO:
RCA PIN Type × 1 1.0 V[p-p] (75 )
AUDIO L - R:
RCA PIN Type × 2 0.5 V [rms]
Y:
1.0 V [p-p] (including synchronization)
±0.35 V [p-p]
PB, PR:
AUDIO L-R:
RCA PIN Type × 2 0.5 V [rms]
TYPE A Connector × 3
D-SUB 15PIN:
R,G,B / 0.7 V [p-p] (75 )
HD, VD / 1.0 - 5.0 V [p-p] (high impedance)
M3 Jack × 1 (RS232C)
RJ-11C (6pin)
Multiple Television Interface (MTI)
Nintendo Controller Power (pin3: DC12V / 30mA (max))
SNES Controller
M3 JACK × 1 0.5 V [rms] (high impedance)
Operating Conditions
15.8 ”
(399 mm)
11.3 ”
(287 mm)
12.1 ”
(307 mm)
17.8 ”
(450 mm)
12.2 ”
(310 mm)
12.6 ”
(318 mm)
Design and Specifications are subject to change without notice. Mass and Dimensions shown are approximate.
37
Panasonic Solutions Company
Unit of Panasonic Corporation of
North America
Three Panasonic Way, 2F-5,
Secaucus, NJ 07094
Panasonic Hospitality LCD HDTV
Limited Warranty
Panasonic Solutions Company. (referred to as
“the Warrantor”) will repair this product and all
included accessories with new or refurbished parts,
free of charge in the USA or Puerto Rico, of the
original purchase in the event of a defect in materials or
workmanship as follows:
Models or Parts
Part
Warranty
Professional Flat
Panel Display
2 Years
Labor
Warranty
2 Years
On-site or carry-in service in the USA and Puerto Rico
may be obtained during the warranty period by contacting
Panasonic Solutions Company Service toll free at
1-800-973-4390.
This warranty is extended only to the original purchaser
and is non transferable. A purchase receipt or other
proof of date of original purchase will be required before
warranty service is rendered.
This warranty only covers failures due to defects in
materials or workmanship, which occur during normal
use. The warranty does not cover damage which occur
in shipment, or failures which are caused by products
not supplied by the warrantor, or failures which result
from improper installation, set-up adjustments, improper
antenna, inadequate signal pickup, maladjustment of
consumer controls, improper operation, power line surge,
improper voltage supply, lighting damage, or service by
anyone other than an authorized repair facility, or
damage that is attributable to acts of God.
LIMITS AND EXCLUSIONS
There are no express warranties except as listed above.
THE WARRANTOR SHALL NOT BE LIABLE FOR
INCIDENTAL OR CONSEQUENTIAL DAMAGES
(INCLUDING, WITHOUT LIMITION, DAMAGE
TO DISCS) RESULTING FROM THE USE OF THIS
PRODUCT, OR ARISING OUT OF ANY BREACH OF
THE WARRANTY. ALL EXPRESS AND IMPLIED
WARRANTIES, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR
PARTICULAR PURPOSE, ARE LIMITED TO THE
APPLICABLE WARRANTY PERIOD SET FORTH
ABOVE.
Some states do not allow the exclusion or limitation
of incidental or consequential damages, or limitations
on how long an implied warranty lasts, so the above
exclusions or limitations may nor apply to you. This
warranty gives you specific legal rights and you may
other rights, which vary from state to state.
If you have a problem with this product that is not
handled to your satisfaction, then write the Consumer
Affairs Department at the Company address indicated
above.
In the USA and Puerto Rico
FOR SERVICE
CALL TOLL FREE
1-800-973-4390
38
Note
Limited Warranty
FAQs, etc.
39
USA only: This product has a fluorescent lamp that contains mercury.
Disposal may be regulated in your community due to environmental
considerations. For disposal or recycling information, please visit
Panasonic website: http://www.panasonic.com/environmental or call
1-888-769-0149.
Customer’s Record
The model number and serial number of this product can be found on its back cover. You should note this serial number in
the space provided below and retain this book, plus your purchase receipt, as a permanent record of your purchase to aid
in identification in the event of theft or loss, and for Warranty Service purposes.
Model Number
Serial Number
¤ Panasonic Corporation 2011
Panasonic Solutions Company
Unit of Panasonic Corporation of North America
Executive Office :
Three Panasonic Way, 2F-5, Secaucus, NJ 07094
Printed in U.S.A.
M0411-0

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement