MK9-221 Base Data

MK9-221
Article Number: 110-00221
Replacement blade for Mark 9 series tools.
Download spec sheet
Base Data
Local Order Number MK9-221
Type MK9-221
Features and Benefits – An easy to read display speeds adjustment and verification.
– Thumb tab on larger tension knob for easy adjustment.
– On the Mark 7, a larger knob sets the three variable tension levels (minimum,
intermediate, and standard). The smaller knob fine tunes within the tension range.
– The larger knob on the Mark 9 sets to two variable tension levels (standard and heavy).
The smaller knob fine tunes the tension setting.
– Housings are manufactured from a high impact, glass reinforced nylon.
– A double wall linkage adds more strength.
– Tough chromium steel components ensure longevity.
– MK7 & MK9 are military specified.
– Single and dual lock-out features available for tensioning ranges.
– Cable tie tension and cut-off tools reduce operator fatigue and speed assembly.
– The Mark 7 features a one inch stroke, while the Mark 9 has a 5/8 inch stroke.
Both reduce trigger cycles required to install cable ties.
– Ergonomic design on both tools ideally fit the operator’s hand. Removable padded
hand grips further reduce impact to the hand.
– Low friction bearing mechanisms reduce hand effort and provide a smooth stroke.
– Extremely light, the Mark 7 weighs only 10 ounces. The Mark 9 weighs just 13 ounces.
– Quick tension adjustability for flush cut-off.
Product Description Specifically developed for maximum ergonomic and performance values, the Mark 7 and Mark 9 series tools combine
reduced hand effort and durable components to ensure efficient assembly and a longer life cycle. The Mark 7 tools
are used with T18 through T50 series HellermannTyton cable ties. The Mark 9 tools can be used with nearly every
HellermannTyton cable tie. Able to accommodate ties to .530" in width, the Mark 9 is used with HellermannTyton's
T18* series cable ties to the heavy duty ties, including the T250 series and EL-TY. High tension versions of both the
Mark 9 and Mark 7 tools (MK9HT and MK7HT) offer the same design features as their standard counterparts but with
higher cut-off tension capabilities. The Mark 9 and Mark 7 high tension tools both offer a 5/8" stroke.
Short Description Replacement blade for Mark 9 series tools.
Product Dimensions
Tension Setting Tools Adjustable
Logistics and Packaging
Quantity Per bag
Package Quantity 1
Package Quantity (Metric) 1
Material and Specifications
ROHS Compliant Yes
© HellermannTyton 2015

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project