Med-El Opus 2 MLxS FM receiver User manual

Below you will find brief information for FM receiver Opus 2 MLxS. This document will guide you through the process of setting up this FM receiver for use with a Med-El Opus 2 speech processor. It includes instructions on how to connect the receiver to the processor, and provides troubleshooting tips in case of problems.

PDF Download

Document

MicroLink MLxS with Med-El Opus 2
What you need:
• MicroLink MLxS receiver
• Opus 2 FM battery cover (This is slightly longer than the
standard battery pack cover).
What to do:
1)
Turn off the speech processor, FM receiver and transmitter.
2)
Open the battery pack lock:
3)
4)
5)
6)
7)
Slide off the battery pack cover.
Slide on the FM Battery Pack Cover which is slightly longer
than the standard battery pack.
Close the battery pack lock.
Insert the pins of the receiver into the sockets at the base of
the FM battery cover. Be careful to line the pins up correctly
and do not use undue force.
The device will detect the receiver automatically. There is
no need to select a particular program.
Troubleshooting
Have you definitely turned on the microphone? Particular care is
needed with the Campus transmitter where there is a switch on the
microphone itself.
To check the FM system you could use the Headset Checker
(Phonak part number 052-3126). Remove the receiver from
the processor and plug into the headphones. Switch on the
receiver and the transmitter. Listen for a clear signal.
Or check the FM using a working hearing aid and audio shoe. Plug
the receiver into the audio shoe, switch on the hearing aid and then
the transmitter and listen to the signal through a stetoclip.
">

Hello! I am an AI chatbot specifically trained to assist you with the Opus 2 MLxS FM receiver User manual. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!

Show related prompts

Assistant typing

Assistant terminated

Key Features

Connects to Opus 2 processor
FM receiver
Automatic detection
No program selection needed
Troubleshooting advice

Frequently Answers and Questions

How do I connect the MicroLink MLxS receiver to the Opus 2 processor?

1. Turn off the speech processor, FM receiver and transmitter. 2. Open the battery pack lock. 3. Slide off the battery pack cover. 4. Slide on the FM Battery Pack Cover which is slightly longer than the standard battery pack. 5. Close the battery pack lock. 6. Insert the pins of the receiver into the sockets at the base of the FM battery cover. Be careful to line the pins up correctly and do not use undue force. 7. The device will detect the receiver automatically. There is no need to select a particular program.

How do I check the FM system is working correctly?

You can use the Headset Checker (Phonak part number 052-3126), remove the receiver from the processor and plug into the headphones. Switch on the receiver and the transmitter. Listen for a clear signal. Or check the FM using a working hearing aid and audio shoe. Plug the receiver into the audio shoe, switch on the hearing aid and then the transmitter and listen to the signal through a stetoclip.

What do I do if the FM system isn't working?

Make sure the microphone is turned on, particularly for the Campus transmitter which has its own switch. If you have checked the microphone, check the FM system using the Headset Checker or a working hearing aid with an audio shoe as described in the previous answer.