Quantum B 13, B 14, B 16, B 20, B 20 Vario bench drill, B 25, B 25 Vario, B 32, B 32 Vario pillar drill Operating manual
Below you will find brief product information for bench drill B 13, bench drill B 14, bench drill B 16, bench drill B 20, bench drill B 20 Vario, pillar drill B 25, pillar drill B 25 Vario, pillar drill B 32, pillar drill B 32 Vario. The quantum bench drills B 13, B 14, B 16 and B 20 are ideal for drilling small to medium-sized holes in metal or plastic. The quantum pillar drills B 25 and B 32 are perfect for larger work pieces that require more stability. Both models offer a variety of features to make drilling easier and more precise, including adjustable drilling depth, speed control, and a drill chuck guard.
Advertisement
Advertisement
quantum
M A S C H I N E N - G E R M A N Y
Operating manual
Version 1.2.5
Bench drill
B 13
B 14
B 16
B 20 / B20 Vario
Pillar drill
B 25 / B 25 Vario
B 32 / B 32 Vario
18 / 01 / 2008
Illustr. 0-1: B13 B 25
Keep for future reference !
Version 1.2.5
B 13 / B14 / B16 / B20 / B25 / B32 Drilling machine Page 1
quantum
M A S C H I N E N - G E R M A N Y
Table of contents
Prohibition, warning and mandatory labels ................................................. 11
Mechanical maintenance work .................................................................... 13
Phase inverter for 400V - machines ............................................................ 22
18 / 01 / 2008 Page 2 Drilling machine B 13 / B14 / B16 / B20 / B25 / B32 Version 1.2.5
18 / 01 / 2008
quantum
M A S C H I N E N - G E R M A N Y
B 16, B 20, B 25, B 32, B20 Vario, B25 Vario, B32 Vario ........................... 24
Inclination of the drilling machine table ....................................................... 25
6 Ersatzteile - Spare parts B13, B14, B16, B20, B25, B32
Bohrfutterschutz B13, B14 - Drill chuck protection B13, B14 ..................................... 39
Bohrfutterschutz B20, B25 - Drill chuck protection B20, B25 ..................................... 45
Ersatzteilliste - Parts list B20 / B25 (Vario) ................................................. 45
Version 1.2.5
B 13 / B14 / B16 / B20 / B25 / B32 Drilling machine Page 3
quantum
M A S C H I N E N - G E R M A N Y
1 Safety
Safety
Glossary of symbols
gives further advice calls on you to get in action
• enumeration notice
This part of the operating manual
• does explain the meaning and how to use the warning references contained in this operating manual,
• does explain how to use the drilling machine,
• highlights the dangers that might arise for you and others if these instructions are not followed thoroughly,
• informs you on how to prevent dangers.
In addition to this operating manual, please note
• applicable laws and regulations,
• legal regulations for preventing an accident,
• the prohibition, warning and mandatory signs as well as the warning notes on the drilling machine.
European standards must be kept during installation, operation, maintenance and repair of the drilling machine.
If European standards are not applied at the national legislation of the country of destination, the specific applicable regulations of each country are to be observed.
If necessary, the required measures must be taken to comply with the specific regulations of each country before the drilling machine is used for the first time.
Always keep the operating manual close to the drilling machine for further reference.
INFORMATION
If you are not able to solve a problem using this manual, please do not hesitate to contact us for further professional advice:
Optimum Maschinen Germany GmbH
Dr. Robert-Pfleger-Str. 26
D- 96103 Hallstadt [email protected]
Page 4 Drilling machine B 13 / B14 / B16 / B20 / B25 / B32 Version 1.2.5
18 / 01 / 2008
Safety
1.1
1.1.1
quantum
M A S C H I N E N - G E R M A N Y
Safety warnings (warning notes)
Classification of hazards
We classify the safety warnings into various levels. The table below gives an overview of the classification of symbols (ideogram) and warning signs for each specific danger and its (possible) consequences.
ideogram warning alert
DANGER!
WARNING!
CAUTION!
definition / consequence
Threatening danger that will cause serious injury or death to people.
Risk: A danger that might cause serious injury or death to a person.
Danger or unsafe procedure that might cause injury to people or damage to property.
ATTENTION!
Situation that could cause damage to the machine and to the product and other types of damages.
No risk of injury to people.
INFORMATION
Application advice and other important or useful information and notes.
No dangerous or harmful consequences for people or objects.
In case of certain dangers, we replace the ideogram by or general danger with a warning of injuries to hands, hazardous electrical voltage, rotating parts.
18 / 01 / 2008 Version 1.2.5
B 13 / B14 / B16 / B20 / B25 / B32 Drilling machine Page 5
quantum
M A S C H I N E N - G E R M A N Y
1.1.2
Further ideograms
Safety
Warning of automatic start-up!
Activation forbidden!
Pull the main plug!
Use safety glasses!
Use ear protection!
1.2
Use protective gloves!
Use protective boots!
Wear a safety suit!
Protect the environment!
Contact address
Proper use
WARNING!
In the event of improper use, the drilling-milling machine
• will endanger personnel,
• will endanger the machine and other material property of the operator, may affect proper operation of the drilling machine.
The drilling machine is constructed and designed for the use in non-explosive surrounding. The drilling machine is designed and manufactured to be used for drilling cold metals or other nonflammable materials or materials that do not constitute a health hazard by using a rotating cutting tool with various chucking grooves.
If the drilling machine is used in any way other than as described above, modified without the authorisation of Optimum Maschinen GmbH or operated with different process data, then it is being used improperly.
We do not take liability for damage caused by improper use.
We would like to stress that any modifications to the construction, or technical or technological modifications that have not been authorised by Optimum Maschinen GmbH will also render the guarantee null and void.
It is also part of proper use that
• the maximum values for the drilling machine are complied with,
• the operating manual is observed,
• inspection and maintenance instructions are observed.
Page 6 Drilling machine B 13 / B14 / B16 / B20 / B25 / B32 Version 1.2.5
18 / 01 / 2008
Safety
1.3
quantum
M A S C H I N E N - G E R M A N Y
WARNING!
Very serious injury.
It is forbidden to make any modifications or alternations to the operating values of the drilling machine! They could endanger employees and cause damage to the drilling machine.
Possible dangers caused by the drilling machine
The drilling machine is state of the art.
Nevertheless, there is a residual risk as the drilling machine operates with
• high revolutions,
• rotating parts,
• electrical voltage and currents.
We have used construction resources and safety techniques to minimize the health risk to persons resulting from these hazards.
If the drilling machine is used and maintained by employees who are poorly qualified, then there might be a risk resulting from incorrect operation and unsuitable maintenance of the drilling machine.
INFORMATION
Everyone involved in the assembly, commissioning, operation and maintenance must
• be duly qualified,
• strictly follow this operating manual.
Due to improper use
• there is a risk for the employee,
• the machine and further property might be endangered,
• the function of the drilling machine could be affected.
Always disconnect the drilling machine if cleaning or maintenance work is being carried out.
WARNING!
The drilling machine may only be used with the safety devices activated.
Disconnect the drilling machine immediately whenever you detect a failure in the safety devices or when they are not mounted!
All additional installations carried out by the operator must incorporate the safety devices prescribed.
This is your responsibility being the operator!
18 / 01 / 2008 Version 1.2.5
B 13 / B14 / B16 / B20 / B25 / B32 Drilling machine Page 7
quantum
M A S C H I N E N - G E R M A N Y
1.4
Qualification of employees
1.4.1
Safety
Target group
This manual applies to
• the operators,
• the users,
• the maintenance staff.
Therefore, the warning notes refer to both operation and maintenance of the drilling machine.
Determine clearly and make a permanent decision in who will be responsible for the different activities on the machine (operation, maintenance and repair).
Vague and unclear assignment of responsibilities constitute a safety hazard!
Always disconnect the main plug of the drilling machine. This will prevent it from being used by unauthorized persons.
1.4.2
Authorized persons
WARNING!
Incorrect use and maintenance of the drilling machine constitute a danger for the staff, objects and the environment.
Only authorized persons may operate the drilling machine!
Persons authorized to operate and maintain should be trained technical staff and instructed by the ones who are working for the operator and for the manufacturer.
Obligations of the operator
The operator must
• train the staff,
• instruct the staff in regular intervals (at least once a year) on
all safety standards that apply to the drilling machine,
the operation,
accredited technical guidelines,
• check the knowledge of the staff,
• document training / instructions,
• require the staff to confirm participation in training / instructions by means of a signature,
• check if the staff is aware of safety rules and dangers in the workplace so that they observe the operating manual.
Obligations of the user
Further requirements to the qualification
The user must
• have followed a training on the operation of the drilling machine,
• know the function and performance,
• before commissioning
have read and understood the operating manual,
be familiar with all safety devices and regulations.
For working on the following machine parts, additional requirements are being applied:
• Electrical parts or operating agents: shall only be performed by an electrician or under the guidance and supervision of an electrician.
Before starting work on electrical parts or operating agents, following measures are to be performed in the following order.
B 13 / B14 / B16 / B20 / B25 / B32 Version 1.2.5
18 / 01 / 2008 Page 8 Drilling machine
Safety
1.5
1.6
quantum
M A S C H I N E N - G E R M A N Y
disconnect all poles secure against switching on check dead circuit
User’s position
The user must stand in front of the drilling machine.
INFORMATION
The main switch of the drilling machine must be easily accessible.
Safety devices
Operate the drilling machine only with properly functioning safety devices.
Stop the drilling machine immediately if there is a failure in the safety device or if it is not functioning for some reason.
It is your responsibility!
If the safety device has been activated or has failed, the drilling machine must only be operated again when
• the cause of the failure has been removed,
• you have made sure that there is no existing danger for persons or objects.
WARNING!
If you bypass, remove or override a safety device in any other way, you are endangering yourself and other persons working on the drilling machine. The possible consequences are the following
• injuries due to components or parts of components flying off at high speed,
• contact with rotating parts,
• fatal electrocution.
The drilling machine includes the following safety devices:
• an EMERGENCY-STOP button,
• a drilling machine table with grooves to fasten the workpiece or a vice,
• a fixed screwed-on protective cover for the pulleys with micro switch,
• a drill chuck guard with micro switch.
18 / 01 / 2008 Version 1.2.5
B 13 / B14 / B16 / B20 / B25 / B32 Drilling machine Page 9
quantum
M A S C H I N E N - G E R M A N Y
1.6.1
ON / OFF switch
The lockable switch is equipped with an
EMERGENCY-STOP function and a release for undervoltage.
ON / OFF switch
Safety
1.6.2
Illustr.1-1: On / OFF switch
Open the cap of the switch in order to switch the drilling machine on.
CAUTION!
Even if the EMERGENCY-STOP button is activated the spindle will keep turning for several seconds - depending on the pre-selected number of revolutions.
Drilling machine table
On the drilling machine table there are holding fittings for sliding blocks.
WARNING!
There is danger of injury because of the parts flying off. Tighten the workpiece properly into the drilling machine table.
holding fixtures for grooves
(14 mm)
1.7
1.7.1
Separating protective devices
Drill chuck protection
Adjust the protective equipment to the correct height before you start working.
To do so, detach the clamping screw, adjust the required height and retighten the clamping screw.
A switch is integrated in the fixture of the spindle protection which monitors that the cover is closed.
INFORMATION
YOU CANNOT START THE MACHINE IF
THE DRILL CHUCK PROTECTION IS
NOT CLOSED.
Drill chuck protection
Illustr.1-2: drilling machine table
Illustr.1-3: Drill chuck protection
Page 10 Drilling machine B 13 / B14 / B16 / B20 / B25 / B32 Version 1.2.5
18 / 01 / 2008
Safety
1.7.2
Protective cover of the pulleys
A protective cover for the belt pulleys is mounted on the drilling head. A switch is integrated in the protective cover which monitors that the cover is closed.
INFORMATION
YOU CANNOT START THE MACHINE IF
THE PROTECTIVE COVER IS NOT
CLOSED.
protective cover
quantum
M A S C H I N E N - G E R M A N Y
1.7.3
1.8
1.9
Illustr.1-4: protective cover
Prohibition, warning and mandatory labels
INFORMATION
All warning labels must be legible. Check them regularly.
Safety check
Check the drilling machine at least once per shift. Inform the person responsible immediately of any defect or change in the operating function.
Check all safety devices
• at the beginning of each shift (with the machine stopped),
• once a week (with the machine in operation),
• after every maintenance and repair work.
Check that the prohibition, warning and information labels as well as the markings on the drilling machine
• are legible (clean them, if necessary),
• are complete.
Personal protective equipment
For certain work, personal protective equipment is required, such as:
• safety helmet,
• protective glasses or face guard,
• protective gloves,
• safety shoes with steel caps,
• ear protection.
Before starting work, make sure that the prescribed personal protective equipment is available at the workplace.
CAUTION!
Dirty or eventually contaminated personal protective equipment might cause disease.
Clean your personal protective equipment
• after each use,
• regularly once a week.
18 / 01 / 2008 Version 1.2.5
B 13 / B14 / B16 / B20 / B25 / B32 Drilling machine Page 11
quantum
M A S C H I N E N - G E R M A N Y
Safety
Personal protective equipment for special work
Protect your face and your eyes: Wear a safety helmet with a face guard for every work, especially for the kind of work where your face and eyes are exposed to hazards.
Use protective gloves when lifting or handling pieces with sharp edges.
Wear safety shoes when fitting, dismanteling or transporting heavy components.
1.10
1.11
Safety during operation
In the description of work with and on the drilling machine we highlight the dangers specific to that work.
WARNING!
Before activating the drilling machine, double check that this will
• not endanger other people,
• not cause damage to equipment.
Avoid unsafe working practice:
• Make sure that your work does not endanger anyone.
• The instructions of this manual must be observed strictly during assemby, operation, maintenance and repair.
• Do not work on the drilling machine, if your concentration is reduced, for example, because you are taking medication.
• Observe the regulations for the prevention of accidents issued by your association for the prevention of accidents and safety in the workplace or other inspection authorities.
• Inform the inspector of any danger or failure.
• Stay at the drilling machine until all rotating parts have come to a halt.
• Use the prescribed personal protective equipment. Make sure to wear a well-fitting work suit and a hainet, if necessary.
• Do not use protective gloves when drilling.
Safety during maintenance
Inform the operating staff on time of any repair and maintenance work.
Report all safety-relevant changes or performance details of the drilling machine.Document all changes, have the operating manual changed accordingly and train the machine operators.
Switching-off and securing the drilling machine
Unplug the main switch before starting any maintenance or repair work.
All machine components and hazardous voltages are disconnected.Only the positions which are marked with the pictogram in the margin are excluded. Attach a warning sign on the machine.
Page 12 Drilling machine B 13 / B14 / B16 / B20 / B25 / B32 Version 1.2.5
18 / 01 / 2008
Safety
1.12
1.12.1
1.13
1.14
quantum
M A S C H I N E N - G E R M A N Y
Use of lifting equipment
WARNING!
Use of unstable lifting and load-suspension gear that might break under load can cause very serious injuries or even death.
Check the lifting and load-suspension gear on
• sufficient load capacity,
• perfect condition.
Observe the regulations for the prevention of accidents issued by your association for the prevention of occupational accidents and safety in the workplace or other inspection authorities.
Fasten the loads properly. Do not walk under lifted loads !
Mechanical maintenance work
Remove all protection and safety devices before starting maintenance work and re-install them once the work has been completed, such as:
• covers,
• safety indications and warning signs,
• earth (ground) cables.
If you remove protection or safety devices, refit them immediately after completing the work.
Check if they are working properly!
Accident report
Inform your superiors and Optimum Maschinen GmbH immediately in case of accidents, possible sources of danger and any action which almost lead to an accident "near misses".
"Near misses" may have many possible causes.
The sooner they are notified, the faster theses causes can be eliminated.
Electric
Have the machine and / or the electrical equipment checked regularly, at least every six months.
Eliminate immediately all defects such as loose connections, defective wires, etc.
A second person must be present during work on live components, to disconnect the power in case of an emergency.
Disconnect the drilling machine immediately if there is a malfunction in the power supply!
18 / 01 / 2008 Version 1.2.5
B 13 / B14 / B16 / B20 / B25 / B32 Drilling machine Page 13
quantum
M A S C H I N E N - G E R M A N Y
2 Technical Data
Technical Data
2.1
The following data which give dimensions and weight are the manufacturer’s authorized machine data.
Power connection
B 13 B 14 B 16 power connection~50Hz
230 V
300 W
230 V
350W
230 V
450 W
B 20
B 20 Vario
3 x 400 V
550 W or
230 V
550 W
B 25
B 25 Vario
3 x 400 V
550 W
B 32
B 32 Vario
3 x 400 V
1,1 kW
230V
550 W
230V
1,1 kW
2.2
Drilling capacity
B 13 B 14 drilling capacity in steel
[mm] reach [mm]
13
104
14
104 spindle sleve travel [mm]
2.3
50
Spindle holding fixture
50
B 13 B 14 spindle holding fixture
2.4
firm/B16
Drilling machine table
firm/B16
B 13 B 14 slewable on the spindle axis [mm] length x width of the working area
T-groove dimension [mm] maximum distance [mm] spindle table working area stand [mm] length x width of the working area
160 x 160
14
240
135 x 175
160 x 160
14
340
140 x 180
B 16
16
125
65
B 16
MK2
B 16
200 x 200
14
390
160 x 170
B 20
20
170
80
B 20
MK2
B 20
275 x 275
14
450
205 x 200
B 25
20
170
80
B 25
MK3
B 25
275 x 275
14
760
235 x 220
B 32
32
225
125
B 32
MK4
B 32
360 x 360
14
660
260 x 270
Page 14 Drilling machine B 13 / B14 / B16 / B20 / B25 / B32 Version 1.2.5
18 / 01 / 2008
Technical Data quantum
M A S C H I N E N - G E R M A N Y
2.5
Dimensions
B 13 height [mm] depth [mm] width [mm] total weight [kg] column diameter [mm]
2.6
46
Working area
B 13
580
420
220
21 height [mm] 2050
2.7
depth [mm] width [mm]
Revolutions
2000
1400
spindle revolutions
B 13
B 14
• 619
• 837
• 1314
• 1807
• 2435
B 14
700
420
230
24
46
B 14
2050
2000
1400
B 16
• 459
• 579
• 787
• 1255
• 2100
B 20
B 25
• 268
• 323
• 376
• 453
• 516
• 533
• 796
• 1029
• 1257
• 1274
• 1783
• 2209
B 16
820
510
270
38
60
B 16
2050
2000
1400
B 20
990
700
300
56
70
B 20
2050
2000
1400
B 25
2050
2000
1400
B 20 Vario
B 25 Vario
• 16 - 686
• 19 - 827
• 22 - 963
• 27 - 1161
• 31 - 1323
• 32 - 1367
• 47 - 2041
• 61 - 2636
• 74 - 3221
• 75 - 3265
• 105 - 3500
• 131 - 3500
B 32
• 167
• 288
• 339
• 379
• 489
• 585
• 1106
• 1368
• 1970
2.8
Environmental conditions
B 13 B 14
2.9
temperature humidity
Operating material
toothed rack drilling column
B 16
5 - 35 °C
25 - 80 %
B 20 commercial slide bearing grease acid-free lubricating oil
B 25
1570
690
390
63
70
B 25
B 32
1730
790
400
138
92
B 32
2050
2000
1400
B 32 Vario
• 10 - 429
• 17 - 739
• 20 - 870
• 22 - 970
• 29 - 1253
• 35 - 1498
• 65 - 2835
• 81 - 3500
• 117 - 3500
B 32
2.10
Emissions
The emission of the drilling machine is below 76 dB(A). If the drilling machine is installed in an area where various machines are in operation, the acoustic influence (immission) on the operator of the drilling machine may exceed 85 dB(A).
We recommend the use of soundproofing and ear protection.
Please note that the duration of the acoustic noise expose, the kind and nature of the working area as well as other machines may influence the noise level in the workplace.
18 / 01 / 2008 Version 1.2.5
B 13 / B14 / B16 / B20 / B25 / B32 Drilling machine Page 15
quantum
M A S C H I N E N - G E R M A N Y
3 Assembly
Assembly
3.1
Extent of supply
When the drilling machine is delivered, check immediately that the machine has not been damaged during shipping and that all components are included. Also check that no fastening screws have come loose.
The delivery volume contains:
B13 / B14 B16 B20
B20 Vario
• drilling head
• drilling table with premounted clamping lever
• stand
• column component with premounted table support
• gear rim drill chuck (B13)
• quick action drill chuck
(B14)
• stand
• column component with premounted table support
• quick action drill chuck
• morse cone MK2
• drill drift
• 3 x handle bar star handle
• assembly set
• operating manual
• drilling head
• drilling table with premounted clamping lever
• 3 x handle bar star handle
• assembly set
• operating manual
• drilling head
• drilling table
• drilling table support
• handle
• stand
• column component
• toothed rod
• guide ring
• quick action drill chuck
• morse cone MK2
• drill drift
• 3 x handle rod star handle
• assembly set
• operating manual
• for 400 V: CEE - 16 A, phase inverter
B25 / B32
B25 Vario
B32 Vario
• drilling head
• drilling table
• drilling table support
• handle
• stand
• column component
• toothed rod
• guide ring
• quick action drill chuck
• morse cone MK3
(B25 / Vario)
• morse cone MK4
(B32 / Vario)
• drill drift
• 3 x handle rod star handle
• assembly set
• operating manual
• CEE - 16 A, phase inverter
3.2
Transport
WARNING!
Machine parts falling off forklift trucks or transport vehicles could cause very serious or even fatal injuries. Follow the instructions and information on the transport case:
• centres of gravity
• suspension points
• weights
• means of transport to be used
• prescribed shipping position
WARNING!
Use of unstable lifting equipment and load-suspension devices that break under load can cause very serious injuries or even death.
Check that lifting and load suspension gear has sufficient load capacity and that it is in perfect condition.
Page 16 Drilling machine B 13 / B14 / B16 / B20 / B25 / B32 Version 1.2.5
18 / 01 / 2008
Assembly
3.3
3.4
3.4.1
quantum
M A S C H I N E N - G E R M A N Y
Observe the rules for preventing accidents issued by your association for the prevention of accidents or other inspection authorities. Hold the loads properly. Never walk under suspended loads!
Storage
ATTENTION!
Improper storage may cause important parts to be damaged or destroyed. Store packed or unpacked parts only under the following ambient conditions:
„Environmental conditions“ on page 15
Consult Optimum Maschinen GmbH if the drilling machine and accessories have to be stored for a period of over three monthes or under different external conditions than those given here.
Installation and assemby
Assembly
WARNING!
Danger of crushing when grouping, assembling and mounting the machine components.
Assembly of stand and tripod
INFORMATION
You need a hexagon spanner 17mm and the hexagon bolts contained in the delivery volume to assemble the drilling machine.
Put the stand on the floor and fix the drill column to the stand. Hexagon bolts are provided to fix it.
drill column hexagon bolts stand
Illustr.3-1: Assembly drill column
18 / 01 / 2008 Version 1.2.5
B 13 / B14 / B16 / B20 / B25 / B32 Drilling machine Page 17
quantum
M A S C H I N E N - G E R M A N Y
Assembly of the drilling machine table
B16, B20, B25 and B32 / Vario
Introduce the toothed rack into the support for the drilling machine table.
Adjust the toothed rack within the drilling machine table in a way that the teeth of the toothed rack cam into the spiral wheel of the support for the drilling machine table.
Push the complete table with the toothed rack onto the tripod. support for drilling machine table toothed rack tripod
Assembly
Illustr.3-2: Assembly of the drilling machine table (B20)
INFORMATION
The larger part without toothing of the toothed rack must be upside.
Push the guide ring on the column and on the toothed rack.
Fix the guide ring with the stud bolt.
Make sure that the drilling table is still turning easily around the drill column.
guide ring stud bolt
Mount the crank handle for height adjustment of the drill head.
Clamp the crank handle with the stud bolt.
crank handle
Illustr.3-3: Assembly guide ring
Illustr.3-4: Assembly crank handle
Page 18 Drilling machine B 13 / B14 / B16 / B20 / B25 / B32 Version 1.2.5
18 / 01 / 2008
Assembly quantum
M A S C H I N E N - G E R M A N Y
Put the drilling table onto the drilling support. Mount the clamping lever.
clamping lever
Mount the drilling table B13 , B14
Push the drilling table support with mounted drilling table onto the column.
drilling table support
Illustr.3-5: Assembly drilling table
Illustr.3-6: Assembly drilling table B13/
B14
Assembly of the drilling head
Put the drilling head on the tripod and turn it until it aligns with the stand.
Make sure that the drilling head is completely fixed onto the tripod.
Tighten the drilling head with the two set screws.
Mount the three levers of the feed cross.
Lever stud bolt
Illustr.3-7: Assembly drilling head
18 / 01 / 2008 Version 1.2.5
B 13 / B14 / B16 / B20 / B25 / B32 Drilling machine Page 19
quantum
M A S C H I N E N - G E R M A N Y
3.4.2
Assembly
Installation
Check the horizontal orientation of the base of the drilling machine with a spirit level.
Attach the drilling machine to the base using the holes in the stand.
The place where the drilling machine is installed must comply with ergonomic workplace requirements.
3.4.3
ATTENTION!
Tighten the setscrews on the drilling machine only until it is firmly secured and can neither move during operation nor be turned over.
If the setscrews are too tight and the base is uneven, the stand of the drilling machine may break.
Installation drawings
B 25 / B32
Illustr. 3-8: B25 B32
Page 20 Drilling machine B 13 / B14 / B16 / B20 / B25 / B32 Version 1.2.5
18 / 01 / 2008
Assembly
3.5
quantum
M A S C H I N E N - G E R M A N Y
First use
WARNING!
Staff and equipment may be endangered if the drilling machine is first used by unexpert staff. We do not take responsibility for damage caused by incorrect commissioning.
Power supply
Connect the main plug of the drilling machine to the power supply.
Check the fuse protection of your power supply to the technical data for the power consumption of the engine.
ATTENTION!
Please pay attention that all three phases (L1, L2, L3) for 400V - drilling machines are connected correctly.
Most engine failures result from incorrect connection, for instance the neutral connector
(N) is being connected to a phase.
This might lead to the following results:
• The engine does get quickly very hot.
• The engine noise increases, i. e. becomes louder.
• The engine has no power.
When the phases are connected incorrectly, the guarantee is null and void.
ATTENTION!
Drilling machines with frequency converter should not be operated with a CEE plug. Connect the machine permanently to a connection box (see EN 50178/5.2.11.1)
INFORMATION
The frequency converter (driving regulator) might release the FI protected switch of your electrical supply. In order to avoid any malfunctioning, you either need an FI protected switch sensitive for pulse current or and AC / DC sensitive one.
In case of a malfunction or release of the FI protected switch, please check the type installed.
The following signs indicate if you have one of the FI protected switches described above.
FI protected switch sensitive to pulse current
FI protected switch sensitive to AC/DC
Typ A
Typ B
18 / 01 / 2008
300 mA
300 mA
We recommend you to use an FI protected switch sensitive to AC/DC. FI protected switches sensitive to AC/DC (RCCB, type B are adequate for 1 phase and 3 phase fed frequency converters (driving regulators).
An FI protected switch type AC (only for alternating current (AC)) is not appropriate for frequency converters. FI protected switches type AC are no longer used.
„Qualification of employees“ on page 8
Version 1.2.5
B 13 / B14 / B16 / B20 / B25 / B32 Drilling machine Page 21
quantum
M A S C H I N E N - G E R M A N Y
3.5.1
Phase inverter for 400V - machines
Change the poles by means of the phase inverter if the turning direction of the drilling machine is not correct.
Phase inverter
Assembly
Illustr.3-9: Phase inverter
Page 22 Drilling machine B 13 / B14 / B16 / B20 / B25 / B32 Version 1.2.5
18 / 01 / 2008
Handling quantum
M A S C H I N E N - G E R M A N Y
4 Handling
4.1
4.2
4.2.1
Safety
Use the drilling machine only under the following conditions:
The drilling machine is in proper working order.
The drilling machine is used as prescribed.
The instruction manual has been followed.
All safety devices are installed and activated.
All malfunctions should be eliminated immediately. Stop the machine immediately at an event of any malfunction in operation and make sure it cannot be started up accidentally or without authorization.
Notify the person responsible immediately of any modification.
„Safety during operation“ on page 12
Control and indicating elements
B 13, B 14
pulley drive with housing
ON / OFF switch with
EMERGENCY STOP function handle for V-belt tension drill depth stop lever for spindle sleeve feed drill chuck guard drilling machine table table height adjustment
Illustr. 4-1: quantum B 13
18 / 01 / 2008 Version 1.2.5
B 13 / B14 / B16 / B20 / B25 / B32 Drilling machine Page 23
quantum
M A S C H I N E N - G E R M A N Y
4.2.2
B 16, B 20, B 25, B 32, B20 Vario, B25 Vario, B32 Vario
potentiometer speed regulation (only Vario) pulley drive with housing
Handling
ON / OFF switch with
EMERGENCY STOP function reversing switch drill chuck guard handle for V-belt tension lever for spindle sleeve feed drill depth stop clamping lever drilling machine table table height adjustment adjustment for the inclination of the drilling machine table
4.2.3
Illustr. 4-2: quantum B20 Vario
Drill depth stop
When drilling several holes of the same depth, you can use the drill depth stop.
• Bei B16 / B20 / B25 / B32:
Unscrew the locking screw and turn the graduated collar until the required drill depth superimposes with the pointer.
Retighten the locking screw.
locking screw drill depth stop scale
Illustr.4-3: Drill depth stop
B16 - B32
Page 24 Drilling machine B 13 / B14 / B16 / B20 / B25 / B32 Version 1.2.5
18 / 01 / 2008
Handling
• For B 13 / B14:
Adjust the limit screw to the required drilling depth.
The spindle may only be lowered to the required drill depth.
limit screw drill depth stop scale
quantum
M A S C H I N E N - G E R M A N Y
4.2.4
Inclination of the drilling machine table
The drilling machine table can be inclined to the right or to the left.
Loosen the fastening screws.
For B16 / B20 / B25 / B32:
Pull out the threaded pin.
fastening screw threaded pin scale
Illustr.4-4: Drill depth stop
B13 - B14
Illustr.4-5: Fastening screw
INFORMATION
If the threaded pin may not be pulled out, the seat may be loosened by turning the nut clockwise.
Adjust the required angle by means of the scale.
Retighten the fastening screw firmly.
INFORMATION
The threaded pin is only provided for correct positioning of a horizontal level of the drilling table.
18 / 01 / 2008 Version 1.2.5
B 13 / B14 / B16 / B20 / B25 / B32 Drilling machine Page 25
quantum
M A S C H I N E N - G E R M A N Y
4.3
Speed alternation
Handling
WARNING!
Only open the cover hood when the drilling machine is disconnected from the electrical power supply.
Close and screw the covering hood after each modification of the number of revolutions.
Disconnect the machine from the electrical power supply.
Detach the screws on the protective cover.
Open the protective cover of the belt drive.
V-belt pulleys clamping screw
V-belt tension
Illustr.4-6: Clamping screw V-belt tension
Untighten the clamping screw of the V-belt tension and push the motor in direction of the drill chuck.
Type Vario:
Adjust the required speed with the potentiometer. Depending on the position of the V-belts on the V-belt pulleys you will get a certain speed range.
INFORMATION
The drilling machine B 20 , B 25 and B 32 are equipped with a handle by which you may push the motor in direction of the drill chuck.
Thus the pre-tension of the V-belts is loosened.
Put the V-belt/-s onto the required V-belt pulley/-s.
Retighten the V-belt/-s
Close and rescrew the cover.
ATTENTION!
Make sure that the tension of the V-belts is correct.
If the tension of the V-belts is too high or too low, it may lead to damages. The V-belts are well tightened if the they could be squeezed approximately 1 cm.
Page 26 Drilling machine B 13 / B14 / B16 / B20 / B25 / B32 Version 1.2.5
18 / 01 / 2008
Handling quantum
M A S C H I N E N - G E R M A N Y
4.3.1
Speed table
Speed table B13 / B14 spindle
Illustr. 4-7: Speed table quantum B13 / B14
Speed table B16 spindle
2100
1255
787
579
459
Illustr. 4-8: Speed table quantum B16
2435
1807
1314
837
619 engine engine
18 / 01 / 2008 Version 1.2.5
B 13 / B14 / B16 / B20 / B25 / B32 Drilling machine Page 27
quantum
M A S C H I N E N - G E R M A N Y
Speed table B20 / B25 spindle
533
376
268
796
453
323
1274
1029
516
2209
1783
1257
Illustr. 4-9: Speed table B20 / B25
center pulleys engine
Handling
Page 28 Drilling machine B 13 / B14 / B16 / B20 / B25 / B32 Version 1.2.5
18 / 01 / 2008
Handling quantum
M A S C H I N E N - G E R M A N Y
Speed table B20 Vario / B25 Vario spindle
15% 100% 225% center pulleys engine
32
22
16
526
371
264
1367
963
686
47 785 2041
27
19
447
318
1161
827
75
61
1256
1014
3265
2636
31 509 1323
131
105
74
2177
1757
1239
3500
3500
3221
Illustr. 4-10: Speed table B20 Vario / B25 Vario
18 / 01 / 2008 Version 1.2.5
B 13 / B14 / B16 / B20 / B25 / B32 Drilling machine Page 29
quantum
M A S C H I N E N - G E R M A N Y
Speed table B32 spindle
379
288
167
1368
585
339
1970
1106
489
Speed table B 32
center pulleys engine
Handling
Page 30 Drilling machine B 13 / B14 / B16 / B20 / B25 / B32 Version 1.2.5
18 / 01 / 2008
Handling quantum
M A S C H I N E N - G E R M A N Y
Speed table B32 Vario spindle
15% 100% 225%
22
17
10
373
284
165
970
739
429
81 1349 3507 center pulleys engine
4.4
35
20
576
335
1498
870
117
65
1942
1090
3500
2835
29
Illustr. 4-11: Speed table B 32 Vario
482 1253
Standard values for speeds with HSS – Eco – twist drill
material drill diameter cooling
3)
2 3 4 5 6 7 8 9 10 steel, unalloyed, up to 600 N7mm
2 n
1) f
2) n
5600 3550 2800 2240 2000 1600 1400 1250 1120
0,04 0,063 0,08 0,10 0,125 0,125 0,16 0,16 0,20
3150 2000 1600 1250 1000 900 800 710 630
E structural steel, alloyed, hardened and tempered, up to 900N/mm
2 structural steel, alloyed, hardened and tempered, up to 1200 n/mm
2 rustproof steels of up to 900
N/mm
2 e.g. X5CrNi18 10 n f" n f f 0,032 0,05 0,063 0,08 0,10 0,10 0,125 0,125 0,16
2500 1600 1250 1000 800 710
2000 1250 1000 800 630 500
630 560
500 400
500
0,032 0,04 0,05 0,063 0,08 0,10 0,10 0,125 0,125
400
0,032 0,05 0,063 0,08 0,10 0,10 0,125 0,125 0,16
E/Öl
Öl
Öl
1): speed [ n ] in r/min
2): feed [ f ] in mm/r
3): cooling: E = emulsion; Öl = cutting oil
The preceding specifications are standard values. In some cases, it might be advantageous to increase or to decrease those values.
Never do without coolant or lubricant when drilling.
Do not center rust-free materials (e.g. VA – or NIRO sheet metals), as the material will harden and the drills will quickly get blunt.
The workpieces must always be tightened rigidly and strongly (vice, screw clamp).
18 / 01 / 2008 Version 1.2.5
B 13 / B14 / B16 / B20 / B25 / B32 Drilling machine Page 31
quantum
M A S C H I N E N - G E R M A N Y
4.5
Drill chuck
4.5.1
Gear rim-drill chuck
Open the drill chuck by means of the key for chucks.
Handling
upper part gear rim drill chuck opening for the key for chucks
4.5.2
4.6
4.7
Page 32
Illustr.4-12: gear rim-drill chuck
ATTENTION!
Make sure that the chucked tool is positioned firmly and correctly.
Disassembly of the drill chuck
WARNING!
Disassemble the drill chuck only when the drilling machine is disconnected from the electrical power supply.
Disconnect the drilling machine from the electrical power supply.
The conical connection can be separated with a plastic or a rubber hammer.
Cooling
The friction generated during rotation can cause the edge of the tool to become very hot.
The tool should be cooled during the drilling process. Cooling the tool with a suitable cooling lubricant ensures better working results and a longer edge life of the tools.
This is best realized by a separate cooling equipment. If there is no cooling equipment included in the delivery volume, you can cool by means of a spray gun or a washing bottle.
ATTENTION!
Danger of injury due to brushes getting caught or pulled in.
Use a spray gun or a washing bottle for cooling.
INFORMATION
Use a water-soluble and non-polluant drilling emulsion which can be obtained from authorized distributors.
Make sure that the cooling agent is being collected.
Respect the environment when disposing any lubricants and cooling agents.
Follow the manufacturer’s disposal instructions.
Before starting the working process
Before you start working, select the required speed. It is depending on the drilling diameter and on the material used.
Drilling machine B 13 / B14 / B16 / B20 / B25 / B32 Version 1.2.5
18 / 01 / 2008
Handling
4.8
quantum
M A S C H I N E N - G E R M A N Y
WARNING!
For drilling jobs, it is necessary to clamp the workpiece firmly to prevent the bit catching on the piece. Example of suitable clamping devices include a machine vice or clamping jaws.
Put a wooden or plastic board beneath the workpiece to avoid drilling through to the work table, vice, etc.
If necessary, adjust the required drill depth by means of the drill depth stop in order to achieve a constant result.
Use a dust remover unit while working with wood. Sawdust can be health hazardous. Also use a suitable protective mask for any work which generates dust.
During the working process
The spindle sleeve feed is being performed by the star grip. Make sure that the feed is being at a regular pace and not too fast.
The reset of the spindle sleeve is being performed by a track recoil spring.
WARNING!
Danger of clothing and / or long hair getting caught.
• Make sure to wear a well-fitting work suit during drilling work.
• Do not use gloves.
• If necessary, wear a hairnet.
ATTENTION!
Danger of collision by the levers of the star grip.
Do not let the star grip get loose when resetting the drill sleeve.
Thin bits break easily.
In case of deep drilling, remove the bit from time to time, to remove drilling chips from the bore hole. Some drops of oil reduce friction and ensure a longer edge life of the bit.
CAUTION!
Danger of crushing! Do not place your hand between the drill head and the spindle sleeve.
18 / 01 / 2008 Version 1.2.5
B 13 / B14 / B16 / B20 / B25 / B32 Drilling machine Page 33
quantum
M A S C H I N E N - G E R M A N Y
5 Maintenance
In this chapter you will find important information about
• inspection,
• maintenance,
• repair of the drilling machine.
The diagram below shows which of these headings each task falls under.
Maintenance
Page 34
Maintenance
Inspection
Measuring
Testing
Maintenance
Rough cleaning
Fine cleaning
Conserving
Lubricating
Completing
Replacing
Readjusting
Illustr. 5-1: Maintenance –Definition according to DIN 31051
Repair
Mending
Replacing
Adjusting
ATTENTION!
Properly-performed regular maintenance is an essential prerequistite for
• safe operation,
• fault-free operation,
• long service life of the drilling machine and
• the quality of the products you manufacture.
Installations and equipment from other manufactures must also be in optimum condition.
ENVIRONMENTAL PROTECTION
During work on the spindle nose and the apron, make sure that
• collector vessels are used, with sufficient capacity for the amount of liquid to be collected,
• liquid and oils are not spilt on the ground.
Clean up any spilt liquid or oils immediately using proper oil-absorption methods and dispose of them in accordance with current legal requirements on the environment.
Cleaning up spillages
Do not re-introduce liquids spilt outside the system during repair or as a result of leakage from the reserve tank: collect them in a collecting vessel to be disposed of.
Disposal
Never dump oil or other pollutant substances in water inlets, rivers or channels.
Drilling machine B 13 / B14 / B16 / B20 / B25 / B32 Version 1.2.5
18 / 01 / 2008
Maintenance quantum
M A S C H I N E N - G E R M A N Y
Used oils must be delivered to a collection centre. Consult your superior if you do not know where the collection centre is.
5.1
Safety
5.1.1
5.1.2
5.2
WARNING!
The consequences of incorrect maintenance and repair work may include:
• very serious injury to personnel working on the drilling machine,
• damage to the drilling machine.
• Only qualified personnel should carry out maintenance and repair work on the drilling machine.
Preparation
WARNING!
Only carry out work on the drilling machine if it has been switched off using the main switch and secured with a padlock to prevent the machine from being turned on.
Attach a warning label.
Restarting
Before restarting run a safety check.
WARNING!
Before connecting the machine you must check that
• there is no danger for personnel
• the drilling machine is undamaged.
Inspection and maintenance
The type and extent of wear depends to a large extent on individual usage and service conditions. Therefore, the indicated intervals only apply for the approved conditions.
Interval
start of shift after each maintenance or repair operation
Where?
What?
How?
18 / 01 / 2008 Version 1.2.5
B 13 / B14 / B16 / B20 / B25 / B32 Drilling machine Page 35
quantum
M A S C H I N E N - G E R M A N Y
Interval
Maintenance
Where?
What?
How?
• Check if the attachment screws for the V-belt tension on the left and right side of the drilling head are well fastened.
• Check if the V-belts are well tightened. Checking the tension of
the V-belts, „Speed alternation“ on page 26.
every week every month guide rail screws on the right
Illustr. 5-2: B20 drilling head on the right
• Lubricate the tripod regularly with commercial oil.
• Lubricate the rack regularly with commercial grease (e.g. friction bearing grease).
tripod toothed rack
Illustr. 5-3: tripod
• Check the V-belt on the drilling head that it is not being porous or used.
V-belts every six months
Illustr. 5-4: V-belts
B 13 / B14 / B16 / B20 / B25 / B32 Version 1.2.5
18 / 01 / 2008 Page 36 Drilling machine
Maintenance
Interval
every six months
quantum
M A S C H I N E N - G E R M A N Y
Where?
What?
How?
Check the electrical equipment/ parts of the drilling machine.
„Qualification of employees“ on page 8
5.3
Repair
For any repair work, request the assistance of an employee of Optimum Maschinen GmbH’s technical service or send us the drilling machine.
If the repairs are carried out by qualified technical staff, they must follow the indications given in this manual.
Optimum Maschinen GmbH does not take responsiblity nor does it guarantee against damage and operating malfunctions resulting from failure to observe this operating manual.
For repairs only use
• faultless and suitable tools,
• original parts or parts from series expressly authorized by Optimum Maschinen GmbH.
18 / 01 / 2008 Version 1.2.5
B 13 / B14 / B16 / B20 / B25 / B32 Drilling machine Page 37
quantum
M A S C H I N E N - G E R M A N Y
Ersatzteile - Spare parts B13, B14, B16, B20, B25, B32
6 Ersatzteile - Spare parts B13, B14, B16, B20, B25, B32
6.1
Ersatzteilzeichnung - Parts drawing B13 / B14
Abb.6-1: B13 / B14
38
S:\Betriebsanleitungen\drilling_machines\B13_14_16_20_25_32\B13-B32_parts\B13-B32_parts.fm
18.1.08
Ersatzteile - Spare parts B13, B14, B16, B20, B25, B32 quantum
M A S C H I N E N - G E R M A N Y
Bohrfutterschutz B13, B14 - Drill chuck protection B13, B14 6.2
202
203
201
6.2.1
Ersatzteilliste - Parts list B13 / B14
Bezeichnung
3
4
1
2
5
6
29
30
31
32
33
34
25
26
27
28
21
22
23
24
17
18
19
20
13
14
15
16
7
8
9
10
11
12
Maschinenfuss
Säulenflansch
Scheibe
Federscheibe
Schraube
Bohrsäule
Klemmhebel
Schraube
Federscheibe
Bohrtisch
Bohrtischhalter
Bolzen
Mutter
Getriebeachse
Hebel
Knopf
Bolzen
Stellgriff
Druckfeder
Motorstange
Elastische Unterlegscheibe
Schraube
Scheibe
Motorbodenplatte
Scheibe
Schraube
Motor
Motorriemenscheibe
Bolzen
Scheibe
Bolzen
Scheibe
Hebegriff
18.1.08
S:\Betriebsanleitungen\drilling_machines\B13_14_16_20_25_32\B13-B32_parts\B13-B32_parts.fm
Designation
Base
Column seat
Washer
Spring Washer
Screw
Column
Clamp Handle 1
Screw 1
Spring Washer
Work Table
Support
Bolt
1
1
1
1
Nut
Gear Axis (pinion shaft) lever knob
Bolt
Adjusting Handle
Compress Spring
Motor Pole
1
1
2
1
3
3
1
1
Cushion Washer
Screw
Washer
Motor Bottom Board
Washer
Screw
Motor
Motor pulley
Bolt
Washer
Bolt
1
1
2
2
3
1
1
3
1
4
4
Qty.
3
3
1
1
3
1
Washer
Lifting Handle
Menge grösse
1
1
Size
M 8
M 8
M8x16
B13
B14
M12x26
M 12
M6x25
M6
M8x10
M6x12
M 6
M 6
M8x16
M6x10
M 6
M8x12
M5x12
M 5
Artikelnummer
Item no.
0300813101
0300813102
0300813134
39
0300813106
0300814106
0300813107
0300813108
0300813110
0300813111
0300813114
0300813115
0300820121
0300813118
0300813119
0300813120
0300813121
0300813124
0300813127
0300813128
quantum
M A S C H I N E N - G E R M A N Y
Ersatzteile - Spare parts B13, B14, B16, B20, B25, B32
Bezeichnung Designation
64
65
66
67
60
61
62
63
56
57
58
59
52
53
54
55
48
49
50
51
43
44
46
47
39
40
41
42
35
36
37
38
Riemengehäuse
Bolzen
Scheibe
Kabelklemme
Kabelöse
Scheibe
Kabelöse
Anschlusskabel
Gehäuse
Schaltgehäuse
Bolzen
Schalter
Mutter
Mutter
Federgehäuse
Rückholfeder
Anzeigevorrichtung
Mutter
Mutter
Stange
Haltevorrichtung
Mutter
Keilriemen
Spindelriemenscheibe
Bolzen
Achsenring
Achsenabdeckung
Bohrungsring
Kugellager
Kugellager
Bohrungsring
Achsenring pulley cover
Bolt
Washer
Wire Clamp
Ring for Wire
Washer
Ring for Wire
Plug Wire
Case
Switch Box
Bolt
Switch
Nut
Nut
Cover of Spring
Turbination Spring
Indicator
Nut
Nut
Rod
Holder
Nut
V-belt
Spindle pulley
Bolt
Ring of Axis
Square Axis Cover
Ring of Hole
Bearing
Bearing
Ring of Hole
Ring of Axis
68
69
70
71
72
73
74
201
202
203
205
Kugellager
Gummiunterlegscheibe
Pinole
Kugellager
Spindel
Bohrfutter
Kabelklemme
Bohrfutterschutz Sichtschutzscheibe
Arm Bohrfutterschutz
Halterung Bohrfutterschutz
203-1 Endlagenschalter Bohrfutterschutz
Gehäuse (Trafo)
Bearing
Rubber Washer
Pinole
Bearing
Spindle chuck
Wire Clamp
Drill chuck protection view sealing pane
Arm drill chuck protection
Fixing drill chuck protection
End position switch drill chuck protection
Housing (trafo)
Menge grösse
Qty.
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
4
2
1
2
2
2
1
2
1
1
1
1
1
Size
M4x12
M 4
M 4
M10x1
M10x1
M6
10 x 650
M6 x 10
22
40
6203
6203
40
12
6201
6201
Teile ohne Abbildung - Parts without illustration
0 Schalterkappe gelb switch cap yellow
0 Abdeckung Lüfter (B13) cover fan (B13)
0
0
Kondensator (Motor)
Lüfterrad (Motor) condensator (engine) fan wheel (engine)
1
1
1
1
0 Bohrfutterschutz alter typ Drill chuck protection old type
0
0
0
0
0
Reed Kontakt
Transformator
Schütz
Schaltkasten (leer)
Nutenstein
Reed contact
Transformer
Contactor
Electric box (empty) t-nut
Komplett-Sätze - Complete sets
201-1
Pinole komplett
Bohrfutterschutz komplett pinole complete
Drill chuck protection complete
Säule kpl.
Halter kplt.
Gehäuse (Trafo) kpl.
column compl.
Holder cplt.
Housing (transformer) compl.
1
1
1
1
1
1
1
1
1
1
1
40
S:\Betriebsanleitungen\drilling_machines\B13_14_16_20_25_32\B13-B32_parts\B13-B32_parts.fm
Artikelnummer
Item no.
0300813135
0300813139
0300813140
0300813141
0300813142
0300813143
0300813144
0300813146
0300813147
0300813180
0300813182
0300813176
0300813178
3008135
+
3008136
0302024192
03008131301
03008131302
0300813179
0300813177
0300813170CPL
030081312011
0300813106CPL
03008131201CPL
03008131205CPL
18.1.08
0300813150
0300813151
0300813152
0300813153
0300813154
0300813155
0300813156
0391050
0300813159
0300813161
0300813162
0300813163
0406203.2R
0406203.2R
0300813166
0300813167
0406201.2R
0300813169
0300813170
0406201.2R
0300813172
3050654
0300813174
03008131201
03008131202
03008131203
030081312031
03008131205
Ersatzteile - Spare parts B13, B14, B16, B20, B25, B32
6.3
Ersatzteilzeichnung - Parts drawing B 16 quantum
M A S C H I N E N - G E R M A N Y
Abb.6-2: B16
18.1.08
S:\Betriebsanleitungen\drilling_machines\B13_14_16_20_25_32\B13-B32_parts\B13-B32_parts.fm
41
quantum
M A S C H I N E N - G E R M A N Y
6.4
Ersatzteile - Spare parts B13, B14, B16, B20, B25, B32
Bohrfutterschutz B16 - Drill chuck protection B16
202
203
201
6.4.1
Ersatzteilliste - Parts list B16
Bezeichnung
28
29
30
31
24
25
26
27
20
21
22
23
16
17
18
19
32
33
34
35
36
37
12
13
14
15
8
9
10
11
6
7
4
5
1
2
3
Maschinenfuss
Säulenflansch
Scheibe
Schraube
Säule
Zahnstange
Säulenring
Bolzen
Bohrtischhalter
Kurbel
Schraube
Bolzen
Klemmhebel
Zahnrad
Schneckenrad
Bohrtisch
Scheibe
Schraube
Knopf
Hebel
Hebelsitz
Bolzen
Skalenring
Schaftritzel
Niete
Zeiger
Gehäuse
Bolzen
Mutter
Rückholfeder
Federgehäuse
Mutter
Feststellknopf
Einstellknopf
Motorstange
Schraube
42
S:\Betriebsanleitungen\drilling_machines\B13_14_16_20_25_32\B13-B32_parts\B13-B32_parts.fm
Menge grösse
Designation
Qty.
Base
Column Seat
Washer
Screw
Column
Rack
Column Ring
Bolt
Support crank
Screw
Bolt
Clamp Handle
Gear
Gear Wheel
Work Table
Washer
Screw
Knob
Lever
Lever Seat
Pin
Dial pinion shaft
Rivet
Pointer
Case
Bolt
Nut
Turbination Spring
Cover of Spring
Nut 2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
3
1
1
1
3
Size
M 8
M8x25
M8x10
M5x10
M 12
M12x25
M8x16
M 8
M8x6
Tight Knob
Adjust Knob
Motor Pole
Screw
1
4
1
1
M8x16
Artikelnummer
Item no.
0300816101
0300816102
0300816105
0300816106
0300816107
0300816109
0300820110
0300816112
0300816113
0300816114
0300816115
0300816116
0300820121
0300816120
0300816121
0300816122
0300816123
0300816124
0300816125
0300816126
0300816127
0300816130
0300816131
0300816134
0300816134
0300816136
18.1.08
Ersatzteile - Spare parts B13, B14, B16, B20, B25, B32 quantum
M A S C H I N E N - G E R M A N Y
Bezeichnung
66
67
68
69
62
63
64
65
58
59
60
61
54
55
56
57
50
51
52
53
46
47
48
49
42
43
44
45
38
39
40
41
Scheibe
Motorbodenplatte
Motor
Scheibe
Federscheibe
Mutter
Mutter
Scheibe
Kabel
Motorstange
Mutter
Gummiring
Scheibe
Bolzen
Bolzen
Motorriemenscheibe
Bolzen
Schaltergehäuse
Schraube
Schalter
Bolzen
Riemengehäuse
Presskabelblock
Keilriemen
Mutter
Spindelriemenscheibe
Schaft
Bohrungsring
Kugellager
Kugellagerring
Kugellager
Bohrungsring
70
71
72
73
Schaftring
Kugellager
Gummiring
Pinole
74 Austreiber
75 Kugellager
76
77
Spindel
Kegeldorn
78 Bohrfutter
79 Bohrfutterschutz alter typ Drill chuck protection old type
201
202
203
Bohrfutterschutz Sichtschutzscheibe
Arm Bohrfutterschutz
Halterung Bohrfutterschutz
203-1 Endlagenschalter Bohrfutterschutz
205 Gehäuse (Trafo)
Drill chuck protection view sealing pane
Arm drill chuck protection
Fixing drill chuck protection
End position switch drill chuck protection
Housing (trafo)
Teile ohne Abbildung - Parts without illustration
0
0
0
Kondensator
Reed Kontakt
Transformator capacitor
Reed contact
Transformer
0
0
0
0
0
Schütz
Schaltkasten Motor (leer)
Nutenstein
Motorlüfterdeckel
O-Anzeige
Contactor
Electric box motor (empty) t-nut motor fan cover
O-Pointer
Komplett-Sätze - Complete sets
201-1
Pinole Komplett
Säule mit Halter
Bohrfutterschutz komplett
Gehäuse (Trafo) kpl.
Pinole complete
Column with base ring
Drill chuck protection complete
Housing (transformer) compl.
Menge grösse
Designation
Qty.
Washer
Motor Bottom Board
Motor
Washer
Spring Washer
Nut
Nut
Washer
Wire Plug
Motor Pole
Nut 1
Rubber Ring 1
1
1
Washer
Bolt
Bolt
Motor Pulley
1
1
4
1
1
1
1
1
1
1
4
1
Bolt
Switch housing screw switch
Bolt
Pulley Cover
Press Wire Block
V-belt
Nut
Spindle pulley pinion
Ring for Hole
Bearing
Ring for Bearing
Bearing
Ring for Hole
Ring for Shaft
Bearing
Rubber ring
Pinole
Drill Drift
Bearing
Spindle
Taper mandril chuck
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
2
2
Size
M 8
8
8
M8
M8
8
M6
6
M6x8
M5x22
M6x16
M5x8
6204
6204
6201
6205
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Artikelnummer
Item no.
0300816139
0300816140
0300816146
0300816147
0300816149
0300816182
0302024192
03008131301
03008131302
0300816181
0300813177
0300816180
0322025
0300816173CPL
0300816105CPL
030081612011
03008161205CPL
0300816153
0300816155
0300816156
0300813147
0300816159
0300816160
0391100
0300816162
0300816163
0300816164
0300816165
0406204.2R
0300816167
0406204.2R
0300816165
0300816170
0406201.2R
0300816172
0300816173
0300816174
0406205.2R
0300816176
0300816177
3050626
3008205
+
3008206
03008161201
03008161202
03008161203
030081312031
03008161205
18.1.08
S:\Betriebsanleitungen\drilling_machines\B13_14_16_20_25_32\B13-B32_parts\B13-B32_parts.fm
43
quantum
M A S C H I N E N - G E R M A N Y
6.5
Ersatzteile - Spare parts B13, B14, B16, B20, B25, B32
Ersatzteilzeichnung - Parts drawing B20 / B25 (Vario)
Abb.6-3: B20 / B25
44
S:\Betriebsanleitungen\drilling_machines\B13_14_16_20_25_32\B13-B32_parts\B13-B32_parts.fm
18.1.08
Ersatzteile - Spare parts B13, B14, B16, B20, B25, B32 quantum
M A S C H I N E N - G E R M A N Y
Bohrfutterschutz B20, B25 - Drill chuck protection B20, B25 6.6
202
203
201
6.6.1
Ersatzteilliste - Parts list B20 / B25 (Vario)
Bezeichnung Designation
3
4
5
1
2
6
30
31
32
33
34
35
36
26
27
28
29
22
23
24
25
18
19
20
21
14
15
16
17
7
8
9
10
11
12
Maschinenfuss
Säulenflansch
Scheibe
Schraube
Säule
Zahnstange
Säulenring
Bolzen
Bohrtischhalter
Kurbel
Schraube
Getriebewelle
Schraube
Klemmhebel
Arm
Bohrtisch
Klemmhebel
Zahnrad
Schneckenrad
Knopf
Hebel
Hebelsitz
Bolzen
Skalenring
Ritzelwelle
Gehäuse
Bolzen
Mutter
Rückholfeder
Federgehäuse
Mutter
Schraube
Bolzen
Nockenwelle
Schraube
Base
Washer
Screw
Column
Rack
Colum Ring
Bolt
Support
Crank
Screw
Gear Shaft
Screw
Clamp Handle
Arm
Work Table
Clamp Handle
Gear
Worm Gear
Knob
Lever
Lever Seat
Pin
Dial
Pinion Shaft
Case
Bolt
Nut
Turbination Spring
Cover of Spring
Nut
Screw
Bolt
Camshaft
Screw
18.1.08
S:\Betriebsanleitungen\drilling_machines\B13_14_16_20_25_32\B13-B32_parts\B13-B32_parts.fm
1
2
1
1
2
1
1
1
1
1
1
1
1
1
3
1
1
3
1
1
1
1
1
1
1
1
1
1
1
1
Menge grösse
Qty.
1
1
4
4
1
Size
B20
B25
10
B20
B25
B20
B25
M 6x10
M 6x15
M 6x15
5 x 32
M10 x 10
M 10
M12x1,5
M10 x 10
Artikelnummer
Item no.
0300820101
0300820102
0300825302
0300820103
0300820104
0300820105
0300825305
0300820106
0300825306
0300820107
0300820109
0300820110
0300820112
0300820115
0300820116
0300820117
0300820118
0300820119
0300820120
0300820121
0300820122
0300820123
0300820124
0300820125
0300820126
0300820127
0300820130
0300820131
0300820133
0300820135
0300820136
45
quantum
M A S C H I N E N - G E R M A N Y
Ersatzteile - Spare parts B13, B14, B16, B20, B25, B32
83
84
Bezeichnung
Motorstange
Schraube
Scheibe
Motorbodenplatte
Motor
Federscheibe
Mutter
Mutter
Scheibe
Motorstange
Schraube
Nocke
Schaltergehäuse
Bolzen
Schalter
Anschlusskabel
Kabelblock
Bolzen
Scheibe
Bolzen
Riemenscheibe Motor
Bolzen
Bohrungsring
Kugellager
Keilriemen
Riemenscheibe Mitte
Zentrierteil
Hebel
Riemenabdeckung
Keilriemen
Rundmutter
Spindelriemenscheibe
Schaft
Bohrungsring
Kugellager
Lagerscheibe
Kugellager
Bohrungsring
Spindelring
Kugellager
Elastischer Unterlegscheibe
Pinole
Austreiber
Kugellager
Spindel B20
Spindel B25
Kegeldorn
Bohrfutter
37
38
39
40
41
49
51
52
42
43
44
45
46
47
48
53
64
65
66
67
60
61
62
63
54
55
56
57
58
59
72
73
74
75
68
69
70
71
76
77
78
79
80
81
82
85 Bohrfutterschutz alter typ
Lock washer nut nut
Washer
Motor Pole
Screw
Cam
Switch housing
Bolt
Switch
Power Wire
Wire Block
Bolt
Washer
Bolt
Motor pulley
Bolt
Ring for Hole
Bearing
V-belt
Middle Pulley
Centering Device
Lifting Handle
Pulley Cover
V-belt
Round Nut
Spindle pulley
Pinion
Ring for Hole
Bearing
Bearing Washer
Bearing
Ring for Hole
Ring for Spindle
Bearing
Cushion Washer
Pinole
Drill Drift
Bearing
Spindle B20
Spindle B25
Taper Mandriel
Chuck
Designation
Motor Pole
Screw
Washer
Motor Bottom Board
Motor
Drill chuck protection old type
Menge grösse
Qty.
9
1
1
4
1
Size
M8 x 25
8
230 V
400 V
8
M 8
M 10
10
M 6x12
230 V
400 V
230 V
400 V
230V
400V
M 6x10
6
M 6x12
M 5 x 6
35
6201
10 x 610
1
1
1
1
1
1
1
1
1
1
1
1
2
2
4
4
1
1
1
1
1
1
1
1
2
1
1
4
4
1
1
1
1
1
1
1
1
1
1
1
1
1
1
10 x 625
47
6005
6005
47
15
6005
B25
B20
6204
MT2
MT3
B20
B25
B20
1
B25
Artikelnummer
Item no.
0300820137
0300820140
0300820141
0300825341
0300820146
0300820148
0300820149
0300820349
0300820151
0300820152
0300820352
0300820153
0300825353
0300820154
0300820158
0300820160
0406201.2R
0300820162
0300820163
0300820164
0300820165
0300820166
0300820167
0300820168
0300820169
0300820170
0300820171
0406005.2R
0300820173
0406005.2R
0300820175
0300820176
0406204.2R
0300825378
0300820178
0300820179
0300820180
0406204.2R
0300820182
0300825382
3050659
3050660
3050626
3008205
+
3008206
3008207
+
3008206
18.1.08
46
S:\Betriebsanleitungen\drilling_machines\B13_14_16_20_25_32\B13-B32_parts\B13-B32_parts.fm
Ersatzteile - Spare parts B13, B14, B16, B20, B25, B32 quantum
M A S C H I N E N - G E R M A N Y
Bezeichnung Designation
86
87
88
89
90
201
202
203
Ring für Kabelschutz
Mutter
Kabelklemme
Scheibe
Bolzen
Bohrfutterschutz Sichtschutzscheibe
Arm Bohrfutterschutz
Halterung Bohrfutterschutz
Ring for Protecting Wire
Nut
Press Wire
Washer
Bolt
Drill chuck protection view sealing pane
Arm drill chuck protection
Fixing drill chuck protection
203-1 Endlagenschalter Bohrfutterschutz
205 Gehäuse (Trafo)
End position switch drill chuck protection
Housing (trafo)
Teile ohne Abbildung - Parts without illustration
0
0
0
0
Kondensator
Reed Kontakt
Transformator
Schütz capacitor
Reed contact
Transformer
Contactor
0 Schaltkasten (leer)
O-Anzeige
Komplett-Sätze - Complete sets
Electric box (empty)
O-Pointer
201-1
Pinole Komplett
Bohrfutterschutz komplett
Säule kplt.
Lüfterraddeckel
Gehäuse (Trafo) kpl.
Spindle sleeve complete
Drill chuck protection complete
Column complete fan cover
Housing (transformer) compl.
Menge grösse
Qty.
1
1
1
1
1
1
1
1
1
1
Size
1
1
1
1
1
1
1
1
1
1
B20
B25
B20
Artikelnummer
Item no.
0300820186
0300820187
0300820188
0300820189
0300820190
03008201201
03008201202
03008201203
030081312031
03008201205
0300820192
0302024192
0300820192
0300820193
0300820179CPL
0300825379CPL
030082012011
0380020105CPL
0300820193
03008201205CPL
18.1.08
S:\Betriebsanleitungen\drilling_machines\B13_14_16_20_25_32\B13-B32_parts\B13-B32_parts.fm
47
quantum
M A S C H I N E N - G E R M A N Y
6.7
Ersatzteile - Spare parts B13, B14, B16, B20, B25, B32
Ersatzteilzeichnung - Parts drawing B32 (Vario)
Abb.6-4: B32
48
S:\Betriebsanleitungen\drilling_machines\B13_14_16_20_25_32\B13-B32_parts\B13-B32_parts.fm
18.1.08
Ersatzteile - Spare parts B13, B14, B16, B20, B25, B32 quantum
M A S C H I N E N - G E R M A N Y
Bohrfutterschutz B32 - Drill chuck protection B32 6.8
202
203
201
6.8.1
Ersatzteilliste - Parts list B32 (Vario)
Bezeichnung Designation
42
42
43
44
33
34
35
36
29
30
31
32
37
38
24
25
26
27
19
20
21
23
15
16
17
18
6
9
10
14
1
4
5
2
3
41
Maschinenfuss
Säulenflansch
Säule
Arretierbolzen
Zahnstange
Schraube
Bolzen (A)
Mutter
Klemmhebel
Bohrtisch
Arm
Bolzen
Schneckenrad
Kurbel
Schraube
Zahnrad
Säulenring
Klemmhebel
Bohrtischhalter
Bolzen
Abdeckung
Federgehäuse
Rückholfeder
Federstift
Federsitz
Federstift
Bolzen
Gehäuse
Motorstange
Schraube
Mutter
Motor
Motorriemenscheibe
Motorriemenscheibe
Paßfeder
Keilriemen
Base
Column Seat
Column
Lock Bolt
Rack
Screw
Pin (A)
Nut
Clamp Handle
Work Table
Arm
Pin
Worm Wheel
Crank bolt
Gear
Column Ring
Clamp Handle
Support
Bolt
Cover Board
Cover of Spring
Turbination Spring
Spring Pin
Spring Seat
Spring Pin
Bolt
Case
Motor Pole
Screw
Nut
Motor
Motor pulley
Motor pulley
Key
V - belt
18.1.08
S:\Betriebsanleitungen\drilling_machines\B13_14_16_20_25_32\B13-B32_parts\B13-B32_parts.fm
Menge grösse
Qty.
4
4
1
1
1
1
1
1
4
4
1
4
1
1
1
1
1
1
1
1
1
1
1
1
1
5
1
1
1
1
1
1
Size
M 10x10
M12 x 40
M6
M 6 x 12
M 5 x 8
6 x 21
3 x 15
M10 x 12
M8
400 V
1
1
1
1 neuer typ / new type alter typ / old type neuer typ / new type
13 x 750
Artikelnummer
Item no.
0300832301
0300832302
0300832303
0300832305
0300832309
0300832314
0300832315
0300832316
0300832317
0300832318
0300832319
0300832321
0300832323
0300832324
0300832325
0300832327
0300832329
0300832330
0300832332
0300832335
0300832336
0300832337
0300832341
0300832342
0323238
0300832343
0323274
49
quantum
M A S C H I N E N - G E R M A N Y
Bezeichnung
Keilriemen
Mutter
Motorbodenplatte
Nocke
Motorstange
Gummidichtung
Bolzen (A)
Nockenwelle
Bolzen
Mutter
Bolzen
Schalter
Bolzen
Schaltergehäuse
Zeiger
Bolzen
Bolzen
Schaftritzel
Skalenring
Bolzen (B)
Klemmstück
Federstift
Hebelsitz
Hebel
Knopf
Riemengehäuse
Schutz Kabelring
Mutter
Druckkabelblock
Scheibe
Bolzen
Bolzen
Quardatisches Bord
Scheibe
Federring
Bolzen
Bolzen
Zentrierstück
Keilriemenscheibe Mitte
Keilriemenscheibe Mitte
Kugellager
Klammer
Keilriemen
Keilriemen
Mutter
Spindel-Keilriemenscheibe
Spindel-Keilriemenscheibe
Schaft
Klammer
Kugellager
Ring
Rundmutter
Scheibe
Kugellager
Scheibe
Pinole
Austreiber
Kugellager
Kugellager
Spindel
Kegeldorn
Bohrfutter
90
97
98
99
100
101
102
103
104
93
94
95
96
90
91
92
92
105
106
107
75
76
77
78
71
72
73
74
67
68
69
70
63
64
65
66
59
60
61
62
55
56
57
58
50
52
53
54
44
45
47
49
83
84
85
86
79
80
81
82
86
87
89
Ersatzteile - Spare parts B13, B14, B16, B20, B25, B32
Designation
V - belt
Nut
Motor Bottom Board
Cam
Motor Pole
Rubber Washer
Bolt (A)
V - belt
V - belt
Nut
Spindle pulley
Spindle pulley
Pinion
Circlip
Bearing
Ring
Round nut
Washer
Bearing
Washer
Pinole
Drill Drift
Bearing
Bearing
Spindle
Taper Mandril chuck
Cam Shaft
Bolt
Nut
Bolt
Switch
Bolt
Switch Housing
Pointer
Bolt
Bolt
Pinion Shaft
Dial
Bolt (B)
Clamping Piece
Spring Pin
Lever Seat
Lever
Knob
Pulley Cover
Protect Wire Ring
Nut
Press Wire Block
Washer
Bolt
Bolt
Square Board
Washer
Spring Washer
Bolt
Bolt
Centering Device
Middle pulley
Middle pulley
Bearing
Circlip
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Menge
Qty.
1
1
4
1
4
4
1
1
1
1
1
2
2
2
2
1
2
3
3
1
1
1
1
2
1
1
1
1
1
1
3
1
4
1
1
1
1
1
1
1
1
2
grösse
Size
15x740Li (old type)
M10
40
6
M5x8
6
6
M6x16 neuer typ / new type alter typ / old type
Artikelnummer
Item no.
0323259
0300832345
0300832347
0300832349
0300832350
0300832352
0300832353
0300832354
0300832355
0300832356
0300832380
0300832384
0300832385
0300832386
0323235
0406202.2R
0300832389
1
40 gates Super HC MN
SPA 832 (new type)
13 x 850
15x845Li (old type)
0300832358
0300820352
0300832360
0300832361
0300832362
0300832363
0300832364
0300832365
0300832366
0300832367
0300832368
0300832369
0300832370
0300832371
0300832372
0300832373
0300832374
0300832375
0300832376
0300832377
0300832378
0323273 neuer typ / new type alter typ / old type
627
6206
6007
6208-2Z
0323258
0300832391
0300832392
0323237
0300832393
0300832394
040627.2R
0300832396
0300832397
0300832398
0406206.2R
03008323100
03008323101
03008323102
0406007.2R
0406208.2R
03008323105
3050661
3050626
50
S:\Betriebsanleitungen\drilling_machines\B13_14_16_20_25_32\B13-B32_parts\B13-B32_parts.fm
18.1.08
Ersatzteile - Spare parts B13, B14, B16, B20, B25, B32 quantum
M A S C H I N E N - G E R M A N Y
Bezeichnung Designation
108 Bohrfutterschutz Chuck guard old type
109
110
111
201
202
203
Druckkabelblock
Scheibe
Bolzen
Bohrfutterschutz Sichtschutzscheibe
Arm Bohrfutterschutz
Halterung Bohrfutterschutz
203-1 Endlagenschalter Bohrfutterschutz
205 Gehäuse (Trafo)
Press Wire Block
Washer
Bolt
Drill chuck protection view sealing pane
Arm drill chuck protection
Fixing drill chuck protection
End position switch drill chuck protection
Housing (trafo)
Teile ohne Abbildung - Parts without illustration
0 Reed Kontakt Reed contact
0
0
0
0
0
Transformator
Schütz
Schaltkasten (leer)
Skala Bohrtisch
Skala Skalenring
Transformer
Contactor
Electric box (empty)
Scale table
Scale for dial
Menge grösse
Qty.
Size
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Artikelnummer
Item no.
3008325
+
3008326
03008323109
03008323110
03008323111
03008201201
03008201202
03008201203
030081312031
03008323205
0302024192
03008131301
03008131302
03008131112
03008131113
03008131114
Komplett-Sätze - Complete sets
101-1
Pinole Komplett
Bohrfutterschutz komplett
Gehäuse (Trafo) kpl.
pinole complete
Drill chuck protection complete
Housing (transformer) compl.
1
1
03008323101CPL
030082011011
03008323205CPL
18.1.08
S:\Betriebsanleitungen\drilling_machines\B13_14_16_20_25_32\B13-B32_parts\B13-B32_parts.fm
51
quantum
M A S C H I N E N - G E R M A N Y
6.9
Ersatzteile - Spare parts B13, B14, B16, B20, B25, B32
Schaltplan - Wiring diagram B13-B20 (230V)
6.10
Schaltplan - Wiring diagram B20-B32 (400V)
52
S:\Betriebsanleitungen\drilling_machines\B13_14_16_20_25_32\B13-B32_parts\B13-B32_parts.fm
18.1.08
Ersatzteile - Spare parts B13, B14, B16, B20, B25, B32 quantum
M A S C H I N E N - G E R M A N Y
Schaltplan - Wiring diagram B20Vario-B32Vario (230V) 6.11
18.1.08
S:\Betriebsanleitungen\drilling_machines\B13_14_16_20_25_32\B13-B32_parts\B13-B32_parts.fm
53
quantum
M A S C H I N E N - G E R M A N Y
7 Malfunctions
Malfunctions
Malfunction
FI protective switch disengages
Noise during working
Cause/ possible effects
• a non-common FI protective switch is used
Solution
•
• Spindle turning dry.
• Tool blunt or is being incorrectly secured.
• Grease spindle
• Use new tool and check securing (fixed setting of the bit, drill chuck and morse taper).
• Select another speed Bit "burnt" • Incorrect speed/ feed too fast
• The chips have not been removed from the bore hole
• Bit blunt
• Extract the bit more often
Bit tip moves, bore hole is not circular
• Operating without or too little cooling agent
• Hard fibre in the workpiece
• unequal length of the cutting spiral or unequal angles in the bit.
• Bit deformed
• Sharpen or replace bit
• Use coolant
• Replace bit or re-sharpen it
Defective bit
Bit running off-centre or
„hopping“
Impossible to introduce drill chuck or morse taper
Engine does not start
Overheating of motor and lack of power
• No support used
• Bit deformed
• Bearings worn down
• Bit badly secured
• Drill chuck defective
• Place a wooden board beneath the workpiece and secure them to one another
• Replace bit
• Have the bearings replaced
• Secure the bit properly
• Replace the drill chuck
• There is dirt, grease or oil on the inner conical surface of the drill chuck or on the conical surface of the drilling spindle
• Clean surfaces well
• Keep surfaces free of grease
• engine connected wrongly
• Defective fuse
• Engine overloaded
•
•
Insufficient mains voltage
Engine connected wrongly
• Have it checked by authorized personnel
• Disconnect immediately and have it checked by authorized personnel
• Have it checked by authorized personnel
Precision of the work deficient
Drilling spindle sleeve does not return to its initial position
The drilling sleeve may not be moved downwards.
• Heavy and unbalanced or twisted workpiece
• Inexact horizontal position of the workpiece holder
• Balance workpiece statically and secure it without straining
• Adjust workpiece holder
• Spindle restoring spring does not work properly
• locking pin is being introduced
• Check spindle restoring spring, replace it, if necessary
• pull out locking pin
• The locking pin is introduced
• The drill depth setting is not released
• Pull out the locking pin
• Release the drill depth setting
Page 54 Drilling machine B 13 / B14 / B16 / B20 / B25 / B32 Version 1.2.5
18 / 01 / 2008
Malfunctions quantum
M A S C H I N E N - G E R M A N Y
Malfunction
The temperature of the spindle bearing is too high
Ratteling of the working spindle when working with rough workpiece surfaces
Cause/ possible effects
Solution
• The bearings are worn out
• The pretension of the bearings is too high
• Replace
• Reduce clearance in the bearing for (taper roller bearings)
• Reduce drilling revolutions / feed
• Working with high drilling revolutions for a long period of time
• Clearance of the bearing too wide
• The working spindle moves up and down
• The adjusting gib has come loose
• Adjust the clearance of the bearing or exchange the bearing
• Adjust the clearance of the bearing
•
•
•
Clamping chuck is loose
Tool is blunt
Workpiece is loose
• Adjust the gib with the adjusting screw to the correct clearance
• control, retighten
• Sharpen the tool or replace it
• Clamp the workpiece properly
18 / 01 / 2008 Version 1.2.5
B 13 / B14 / B16 / B20 / B25 / B32 Drilling machine Page 55
quantum
M A S C H I N E N - G E R M A N Y
8 Appendix
8.1
8.2
Appendix
Copyright
© 2007
This documentation is copyright. All derived rights are also reserved, especially those of translation, re-printing, use of figures, broadcast, reproduction by photo-mechanical or similar means and recording in data processing systems, neither partial nor total.
The company reserves the right to make technical alternations without prior notice.
Terminology/Glossary
Term
drill drift drill chuck drilling head drill sleeve drill spindle drilling machine table morse taper sleeve lever quick action drill chuck workpiece tool locking pin
Explanation
tool to release the bit or the drill chuck from the drill spindle drill holding fixture upper part of the drilling machine fixed hollow shaft which runs in the drill spindle shaft driven by the engine support face, clamping surface cone of the drill or of the drill chuck manual control for the drill feed drill holding fixture to be clamped manually part to be drilled, part to be machined bit, countersink, etc.
pin to hold the drill sleeve at a certain height in order to disassemble the drill chuck or the tool
Page 56 Drilling machine B 13 / B14 / B16 / B20 / B25 / B32 Version 1.2.5
18 / 01 / 2008
Appendix
8.3
8.4
8.5
quantum
M A S C H I N E N - G E R M A N Y
Warranty
Within the term of warranty, the company Optimum warrants for a perfect quality of its products and will reimburse any cost for overhaul or exchange of defective parts in case of construction error, fault in material and / or defect of fabrication.
The term of warranty for commercial use is 12 months and for use as an amateur it is 24 months. Condition for a warranty claim due to construction errors, faults in material and / or defects of fabrication is:
• Proof of purchase and that the instructions for use had been followed.
In order to assert the claim of warranty, you have to present a typescript original receipt of purchase. It must comprise the complete address, date of purchase and type designation of the product.
The instruction for use for the corresponding device as well as the safety information are to be observed. Damages due to operator’s mistakes may not be accepted as warranty claims.
• Correct use of the devices.The products of the company Optimum had been designed and built for certain purposes. They are listed in the operation manual.
The warranty claim may not be accepted if the operating manual is not being followed properly or if it is used for a purpose which has not been intended or with improper accessory.
• Maintenance work and cleaning.
It is absolutely necessary to maintain and clean the machine in regular intervals according to the prescriptions of the instruction for use.
By intervention of a third party, any warranty claim will expire. Maintenance work and cleaning are usually not part of the claim of warranty.
• Original spare parts
Make sure to use only original spare parts and original accessory. This can be acquired from authorized distributors of the machine.
When other than original parts are being used, consequential damages may occur and danger of accidents will increase. Disassembled or partially disassembled devices and devices which are repaired with foreign parts are excluded from warranty claims.
• Wearing parts
Certain components are subject to wear out by time respectively a standard wear by use on the corresponding machine.
Among these components are e.g. V-belts, ball bearings, switches, mains cables, gaskets and washers, etc. These wearing parts are not part of the warranty.
Disposal
Disposal of used electric and electronic machines
(Applicable in the countries of the European Union and other European countries with a separate collecting system for those devices).
The sign on the product or on its packing indicates that the product must not be handles as common household waist, but that is needs to be delivered to a central collection point for recycling.
Your contribution to the correct disposal of this product will protect the environment and the health of your fellow men. The environment and the health are endangered by incorrect disposal. Recycling of material will help to reduce the consumption of raw materials. Your District
Office, the municipal waste collection station or the shop where you have bought the product will inform you about the recycling of this product.
RoHS , 2002/95/CE
The sign on the product or on its packing indicates that this product complies with the European guideline 2002/95/EC .
18 / 01 / 2008 Version 1.2.5
B 13 / B14 / B16 / B20 / B25 / B32 Drilling machine Page 57
quantum
M A S C H I N E N - G E R M A N Y
8.6
Appendix
Product follow-up
We are required to perform a follow-up service for our products which extends beyond shipment.
We would be grateful if you could send us the following information:
• modified settings
• experiences with the drilling machine, which could be important for other users
• recurring failures
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26
D-96103 Hallstadt
Fax +49 (0) 951 - 96822 - 22
E-Mail: [email protected]
Page 58 Drilling machine B 13 / B14 / B16 / B20 / B25 / B32 Version 1.2.5
18 / 01 / 2008
8.7
quantum
M A S C H I N E N - G E R M A N Y
EC - declaration of conformity
The manufacturer/ retailer: hereby declares that the following product, type of machine:
bench drill pillar drill
designation of machine:
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26
D - 96103 Hallstadt
B13, B14, B16, B20, B20
Vario, B25, B25 Vario, B32,
B32 Vario
relevant EU directives: machine directives
EMV- directive low voltage directive
98/37/EG, Appendix II A
89/336/EWG
73/23/EWG
meets the provisions of the aforementioned directive, including any amendments valid at the time of this statement.
In order to ensure conformity, the following harmonized standard in particular have been applied:
EN 12717: 2001
EN 62079
Safety of machine tools, drilling machines
Editing of instructions - structure, content and illustration (IEC 62079:2001)
Thomas Collrep
(Manager)
Hallstadt, 18 / 01 / 2008
Kilian Stürmer
(Manager)
Stand 18 / 01 / 2008 Version 1.2.5
B 13 / B14 / B16 / B20 / B25 / B32 Drilling machine Page 59
quantum
M A S C H I N E N - G E R M A N Y
Index
A
Assembly
...................................................... 16
C
Cooling
......................................................... 32
Copyright
...................................................... 56
D
Declaration of conformity
.............................. 59
Dimensions
................................................... 15
Drill chuck
..................................................... 32
Drill depth stop
............................................. 24
E
EC - declaration of conformity
Electric
.......................................................... 13
Environmental conditions
............................. 15
Extent of supply
............................................ 16
H
Handling
....................................................... 23
I
Inclination of the drilling machine table
Inspection
..................................................... 35
Installation
.................................................... 17
Installation drawings
..................................... 20
M
Maintenance
................................................. 34
Malfunctions
................................................. 54
O
ON / OFF switch
........................................... 10
P
Power connection
......................................... 14
Power supply
................................................ 21
Product follow-up
.......................................... 58
Prohibition, warning and mandatory labels
Q
Qualification of employees
S
Safety devices
.............................................. 9
Speed alternation
......................................... 26
Speed table
.................................................. 27
Spindle holding fixture
.................................. 14
Storage
......................................................... 17
T
Technical Data
............................................. 14
Transport
...................................................... 16
U
User’s position
.............................................. 9
W
Warning notes
.............................................. 5
Warranty
....................................................... 57
Page 60 Drilling machine B 13 / B14 / B16 / B20 / B25 / B32 Version 1.2.5
18 / 01 / 2008
Download
Public link updated
The public link to your chat has been updated. You may view and manage your chat links after registration here.
Document public link
Advertisement
Key features
- Adjustable drilling depth
- Speed control
- Drill chuck guard
- Easy-to-use controls
- Durable construction
- Safety features
- Wide range of drilling capacities
- Versatile applications
