171 3 us~v~Specification Sheet

171 3 us~v~Specification Sheet
HEAT RECOVERY VENTILATOR
HRV CONSTRUCTO 1.5ES
Part no. 46110 Canada
Part no. 1601702 U.S.A
66 to 150 CFM (0.4 in. w.g.)
Controls
• This unit is very simple to operate. Once it is installed, press on its
push button, located on the bottom of the unit, to activate it. Press
once for low speed, once again for high speed, and once more to
stop it.
• For more convenience, this unit can also be controlled by an optional
main control. For a complete list of optional main and auxiliary
controls available, refer to the Wall Control Compatibility Chart
on last pages of wall controls specification sheet, available at
www.venmar.ca.
• For more details about controls, refer to the Main and auxiliary wall
controls user guide, also available at www.venmar.ca.
Options
• Complete line of registers and diffusers
VB0166
CONSTRUCTO® SERIES: PERFECT FOR NEW
RESIDENTIAL CONSTRUCTION
Contractors and builders need cost-effective, reliable and
code-compliant mechanical ventilation systems for new home
construction. The Venmar AVS Constructo Series offers superior value
at an entry-level price. The Constructo 1.5ES represents over 15 years
of continuous improvement to deliver contractors the durability and
reliability they have come to expect from Venmar.
Defrosting System
The HRV Constructo 1.5ES uses an efficient defrosting method. No
negative pressure is created by air exhausted to the outdoors, as the air
is recirculated into the house, helping to prevent any backdraft.
OUTDOOR TEMPERATURE
DEFROST CYCLE (MINUTES)
°C
°F
DEFROST / OPERATION
WARMER THAN -5
WARMER THAN 23
NO DEFROST
Key features:
-5 TO -15
23 TO 5
7 / 50
• Maintenance free, totally enclosed, sealed bearings motor
-15 TO -27
5 TO -17
7 / 25
-27 AND LESS
-17 AND LESS
10 / 20
• Pressure taps, balancing dampers and straps for insulated ducts for
quick, effective installation
STALE AIR
FROM BUILDING
• Integrated “snap-in” drain system installs in seconds
with no additional parts
FILTRERED AIR
TO BUILDING
• ENERGY STAR® qualified
• Compatible with the Deco-Touch™ digital wall control
VF0053
REPAIRS AND MAINTENANCE
All parts of the HRV Constructo 1.5ES that could need maintenance
can be removed in less than 5 minutes, allowing direct access for easy
repairs. The motor is permanently lubricated.
Heat Recovery Core
Dimensions: 12” x 14” x 15.5” (30.5 cm x 35.5 cm x 39.4 cm)
Exchange surface: 102 ft² (9.54 m²)
WARRANTY
Weight: 6.2 lb (2.8 kg)
The HRV Constructo 1.5ES is protected by a 5-year warranty on parts.
The heat recovery core is covered by a limited lifetime warranty, with
the original proof of purchase.
Material: Polypropylene
Type: Crossflow core
Warranty: Limited Lifetime
Requirements and Standards
Available at:
• Complies with the UL 1812 requirements regulating the installation
of Heat Recovery Ventilators
• Complies with the CSA C22.2 no. 113 Standard applicable to ventilators
• Complies with CSA F326 requirements regulating the installation of
Heat Recovery Ventilators
• Technical data was obtained from published results of tests relating
to CSA C439 Standards
• HVI certified and ENERGY STAR® qualified
DIMENSIONS: HRV CONSTRUCTO 1.5ES
35” (891 mm)
Hooks Location
for Hanging Chains
17¼” (438 mm)
30¼” (768 mm)
Motorized
Damper
Terminal
Block
Location
17”
(432 mm)
Heat
Recovery
Core
Door
Power Cord
36” (914 mm)
VK0077A
VENTILATION PERFORMANCE
EXTERNAL STATIC
PRESSURE
PA
IN. W.G.
25
0.1
50
0.2
75
0.3
100
0.4
125
0.5
150
0.6
175
0.7
NET SUPPLY
AIR FLOW
L/S
85
82
77
71
67
60
51
6”
(152 mm)
Blower
Assembly
CFM
M3/H
180
174
163
150
141
128
108
306
296
277
255
240
217
183
L/S
86
82
77
71
67
61
52
ENERGY PERFORMANCE
GROSS AIR FLOW
SUPPLY
EXHAUST
CFM
M3/H
L/S
CFM
182
309 92
194
175
297 86
182
164
279 81
171
151
257 71
151
142
241 57
120
130
221 40
85
110
187 27
57
SUPPLY
TEMPERATURE
°C
°F
HEATING
0
32
0
32
0
32
-25 -13
M3/H
330
309
291
257
204
144
97
NET AIR FLOW
L/S
CFM
M3/H
31
40
54
38
66
86
115
81
112
146
195
138
POWER
SENSIBLE APPARENT
CONSUMED RECOVERY SENSIBLE
WATTS EFFICIENCY EFFECTIVENESS
67
74
90
87
67
65
61
60
79
75
70
76
-0.01
-0.01
-0.01
0.02
100
APPARENT (%)
90
NET (%)
0.8
EFFICIENCY
EXTERNAL STATIC PRESSURE
IN. W.G. (PA = N X 248.8)
LATENT RECOVERY
MOISTURE
TRANSFER
0.6
0.4
80
70
60
50
SUPPLY (L/S)
EXHAUST (L/S)
0.2
40
VG0090
0
VG0089A
0
25
50
75
100
125
150
175
0
25
50
75
100
AIR FLOW - L/S (0.47 L/S = 1 CFM
NOTE: All specifications are subject to change without notice.
200
CFM (L/S = CFM X 0.4719) (M³/H = L/S X 3.6)
SPECIFICATIONS AND RATINGS
• Model: HRV Constructo 1.5ES
• 6" Round Ports
• Speed Control on unit: Low and High speeds.
• Part Number Canada : 46110
• Housing: Pre-painted steel
• Part Number U.S.A.: 1601702
• Total Assembled Weight (including
• Insulation: Expanded polystyrene
polypropylene core): 65 lb. (29.5 kg)
• Drains: 1/2" (1.2 cm) fittings with
• Filters: 15 ppi washable reticulated foam
• Heat Recovery Core:
- Heat Exchange Surface Area: 102 ft.² (9.54 m²)
• Mounting: Suspension by chains and springs
10 ft. (3 m) PVC drain hose
- Type: Crossflow
- Material: Polypropylene
• Supply & Exhaust Blower Motor: 1 PSC Motor
15.375" x 7.125" x 0.75"
- Protection type: Thermally protected
(39 cm x 18 cm x 1.9 cm)
- Insulation class: B
Project:
Location:
Part Number:
Quantity:
Submitted by:
Other modes available with optional
mainl wall controls.
• Unit Electrical Characteristics:
120 volts, 60 Hz, 1.5 amps, 160 watts
REMARKS
Date:
Residential Products Group, 550 Lemire Blvd., Drummondville, Qc, Canada J2C 7W9 - Tel.: 1-800-567-3855 Fax: 1-800-567-1715
www.venmar.ca
HRVConstructo1.5ESd151009
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement