G-Series Hydraulic Dimensions Data Imperial

G-Series Hydraulic Dimensions Data Imperial
Data sheet
Sheet No.: GHI 3.01 RevB
Date: August 2010
G-Series
Dimensions – (Hydraulic) In.
Double-Acting Actuators
G0100X.X (CW Model Shown)
Actuator Model
A
G01001.5
4.25
G01001.7
4.50
G01002.0
4.50
G01002.2
4.75
G01002.5
5.00
G01003.0
5.50
G01003.5
6.00
G0100X.X-M11 (CW Model Shown)
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in inches.
www.Bettis.com
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Actuator Model
A
G01001.5-M11
4.25
G01001.7-M11
4.50
G01002.0-M11
4.50
G01002.2-M11
4.75
G01002.5-M11
5.00
G01003.0-M11
5.50
G01003.5-M11
6.00
Data sheet
Sheet No.: GHI 3.02 RevB
Date: August 2010
G-Series
Dimensions – (Hydraulic) In.
Double-Acting Actuators
Mounting Pad Detail
Adjustable End Stops
& Jackscrews
X (-ETS)
Extended
Travel Stop
X
End
Stop
Power Module
27.32
20.41
C/F*
Blind End Cap Module
15.83
8.92
17.43
Spring Module
47.65
40.31
46.63
C/F Consult Factory
Note:Jackscrews are not recommended for use on hydraulic cylinders. If used,
they are allowable on the Spring Module or Blind End Cap Modules ends only.
It is probable that some leakage of hydraulic fluid past the jackscrew pressure
containing thread seals will occur over time if used on the Power Module side,
negating any warranty for hydraulic Power Modules.
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in inches.
www.Bettis.com
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Z*
(M3/M3HW)
Jackscrew
Data sheet
Sheet No.: GHI 3.03 RevB
Date: August 2010
G-Series
Dimensions – (Hydraulic) In.
Spring-Return Actuators
G0100X.X-SR (CW Model Shown)
Actuator Model
A
G01001.5-SR
4.25
G01001.7-SR
4.50
G01002.0-SR
4.50
G01002.2-SR
4.75
G01002.5-SR
5.00
G01003.0-SR
5.50
G01003.5-SR
6.00
G0100X.X-SR-M11 (CW Model Shown)
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in inches.
www.Bettis.com
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Actuator Model
A
G01001.5-M11
4.25
G01001.7-M11
4.50
G01002.0-M11
4.50
G01002.2-M11
4.75
G01002.5-M11
5.00
G01003.0-M11
5.50
G01003.5-M11
6.00
Data sheet
Sheet No.: GHI 3.04 RevB
Date: August 2010
Dimensions – (Hydraulic) In.
Spring-Return Actuators
Accessory Details
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in inches.
www.Bettis.com
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
G-Series
Data sheet
Sheet No.: GHI 3.05 RevB
Date: August 2010
G-Series
Dimensions – (Hydraulic) In.
Double-Acting Actuators
G200X.X (CW Model Shown)
Actuator Model
A
G2001.7
4.50
G2002.0
4.62
G2002.25
4.75
G2002.5
5.00
G2003.0
5.50
G2003.5
6.00
G2004.0
6.50
G200X.X-M11 or G2020X.X (No M11) (CW Model Shown)
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in inches.
www.Bettis.com
Actuator Model
A
Actuator Model
A
G2001.7-M11
4.50
G20201.7
4.50
G2002.0-M11
4.62
G20202.0
4.62
G2002.25-M11
4.75
G20202.25
4.75
G2002.5-M11
5.00
G20202.5
5.00
G2003.0-M11
5.50
G20203.0
5.50
G2003.5-M11
6.00
G20203.5
6.00
G2004.0-M11
6.50
G20204.0
6.50
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Data sheet
Sheet No.: GHI 3.06 RevB
Date: August 2010
G-Series
Dimensions – (Hydraulic) In.
Double-Acting Actuators
Valve/Accessory Mounting Details
Adjustable End Stops
& Jackscrews
X (-ETS)
Extended
Travel Stop
X
End
Stop
Power Module
28.32
21.41
C/F*
Blind End Cap Module
16.83
9.92
22.55
Spring Module
48.22
41.31
50.35
C/F Consult Factory
*Note: Jackscrews are not recommended for use on hydraulic cylinders. If used,
they are allowable on the Spring Module or Blind End Cap Modules ends only.
It is probable that some leakage of hydraulic fluid past the jackscrew pressure
containing thread seals will occur over time if used on the Power Module side,
negating any warranty for hydraulic Power Modules.
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in inches.
www.Bettis.com
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Z*
(M3/M3HW)
Jackscrew
Data sheet
Sheet No.: GHI 3.07 RevB
Date: August 2010
G-Series
Dimensions – (Hydraulic) In.
Spring-Return Actuators
G200X.X-SR (CW Model Shown)
Actuator Model
A
G2001.7-SR
4.50
G2002.0-SR
4.62
G2002.25-SR
4.75
G2002.5-SR
5.00
G2003.0-SR
5.50
G2003.5-SR
6.00
G2004.0-SR
6.50
G200X.X-SR-M11 (CW Model Shown)
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in inches.
www.Bettis.com
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Actuator Model
A
G2001.7-SR-M11
4.50
G2002.0-SR-M11
4.62
G2002.25-SR-M11
4.75
G2002.5-SR-M11
5.00
G2003.0-SR-M11
5.50
G2003.5-SR-M11
6.00
G2004.0-SR-M11
6.50
Data sheet
Sheet No.: GHI 3.08 RevB
Date: August 2010
Dimensions – (Hydraulic) In.
Spring-Return Actuators
Accessory Details
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in inches.
www.Bettis.com
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
G-Series
Data sheet
Sheet No.: GHI 3.09 RevB
Date: August 2010
G-Series
Dimensions – (Hydraulic) In.
Double-Acting Actuators
G300X.X (CW Model Shown)
Actuator Model
A
G3002.0
4.75
G3002.25
5.00
G3002.5
5.25
G3003.0
5.50
G3003.5
6.00
G3004.0
6.50
G3004.5
7.00
G300X.X-M11 or G3020X.X (No M11) (CW Model Shown)
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in inches.
www.Bettis.com
Actuator Model
A
Actuator Model
A
G3002.0-M11
4.75
G30202.0
4.75
G3002.25-M11
5.00
G30202.25
5.00
G3002.5-M11
5.25
G30202.5
5.25
G3003.0-M11
5.50
G30203.0
5.50
G3003.5-M11
6.00
G30203.5
6.00
G3004.0-M11
6.50
G30204.0
6.50
G3004.5-M11
7.00
G30204.5
7.00
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Data sheet
Sheet No.: GHI 3.10 RevB
Date: August 2010
G-Series
Dimensions – (Hydraulic) In.
Double-Acting Actuators
Valve/Accessory Mounting Details
Adjustable End Stops
& Jackscrews
X (-ETS)
Extended
Travel Stop
X
End
Stop
Power Module
33.09
24.53
C/F*
Blind End Cap Module
19.57
11.10
22.86
Spring Module
53.30
44.74
55.00
C/F Consult Factory
*Note: Jackscrews are not recommended for use on hydraulic cylinders. If used,
they are allowable on the Spring Module or Blind End Cap Modules ends only.
It is probable that some leakage of hydraulic fluid past the jackscrew pressure
containing thread seals will occur over time if used on the Power Module side,
negating any warranty for hydraulic Power Modules.
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in inches.
www.Bettis.com
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Z*
(M3/M3HW)
Jackscrew
Data sheet
Sheet No.: GHI 3.11 RevB
Date: August 2010
G-Series
Dimensions – (Hydraulic) In.
Spring-Return Actuators
G300X.X-SR-M11 (CW Model Shown)
Actuator Model
A
G3002.0-SR
4.75
G3002.25-SR
5.00
G3002.5-SR
5.25
G3003.0-SR
5.50
G3003.5-SR
6.00
G3004.0-SR
6.50
G3004.5-SR
7.00
G30XX-SR-M11 (CW Model Shown)
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in inches.
www.Bettis.com
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Actuator Model
A
G3002.0-SR-M11
4.75
G3002.25-SR-M11
5.00
G3002.5-SR-M11
5.25
G3003.0-SR-M11
5.50
G3003.5-SR-M11
6.00
G3004.0-SR-M11
6.50
G3004.5-SR-M11
7.00
Data sheet
Sheet No.: GHI 3.12 RevB
Date: August 2010
Dimensions – (Hydraulic) In.
Spring-Return Actuators
Accessory Details
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in inches.
www.Bettis.com
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
G-Series
Data sheet
Sheet No.: GHI 3.13 RevB
Date: August 2010
G-Series
Dimensions – (Hydraulic) In.
Double-Acting Actuators
G400X.X (CW Model Shown)
Actuator Model
A
G4002.5
5.66
G4003.0
6.50
G4003.5
6.75
G4004.0
7.12
G4004.5
7.50
G4005.0
8.00
G4006.0
8.88
G400X.X-M11 or G4020X.X (No M11) (CW Model Shown)
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in inches.
www.Bettis.com
Actuator Model
A
Actuator Model
A
G4002.5-M11
5.66
G40202.5
5.66
G4003.0-M11
6.50
G40203.0
6.50
G4003.5-M11
6.75
G40203.5
6.75
G4004.0-M11
7.12
G40204.0
7.12
G4004.5-M11
7.50
G40204.5
7.50
G4005.0-M11
8.00
G40205.0
8.00
G4006.0-M11
8.88
G40206.0
8.88
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Data sheet
Sheet No.: GHI 3.14 RevB
Date: August 2010
G-Series
Dimensions – (Hydraulic) In.
Double-Acting Actuators
Valve/Accessory Mounting Details
Adjustable End Stops
X
Extended
Travel Stop
Power Module
39.74
31.12
Blind End Cap Module
23.32
14.70
Spring Module
60.61
52.00
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in inches.
www.Bettis.com
X
End Stop
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Data sheet
Sheet No.: GHI 3.15 RevB
Date: August 2010
G-Series
Dimensions – (Hydraulic) In.
Spring-Return Actuators
G400X.X-SR (CW Model Shown)
Actuator Model
A
G4002.5-SR
5.66
G4003.0-SR
6.50
G4003.5-SR
6.75
G4004.0-SR
7.12
G4004.5-SR
7.50
G4005.0-SR
8.00
G4006.0-SR
8.88
G400X.X-SR-M11 (CW Model Shown)
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in inches.
www.Bettis.com
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Actuator Model
A
G4002.5-SR-M11
5.66
G4003.0-SR-M11
6.50
G4003.5-SR-M11
6.75
G4004.0-SR-M11
7.12
G4004.5-SR-M11
7.50
G4005.0-SR-M11
8.00
G4006.0-SR-M11
8.88
Data sheet
Sheet No.: GHI 3.16 RevB
Date: August 2010
Dimensions – (Hydraulic) In.
Spring-Return Actuators
Lug/Accessory Details
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in inches.
www.Bettis.com
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
G-Series
Data sheet
Sheet No.: GHI 3.17 RevB
Date: August 2010
G-Series
Dimensions – (Hydraulic) In.
Double-Acting Actuators
G500X.X (CW Model Shown)
Actuator Model
A
G5003.5
7.63
G5004.0
8.13
G5004.5
8.63
G5005.0
9.14
G5006.0
9.75
G5007.0
10.63
G5008.0
11.88
G500X.X-M11 or G5020X.X (No M11) (CW Model Shown)
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in inches.
www.Bettis.com
Actuator Model
A
Actuator Model
A
G5003.5-M11
7.63
G50203.5
7.63
G5004.0-M11
8.13
G50204.0
8.13
G5004.5-M11
8.63
G50204.5
8.63
G5005.0-M11
9.14
G50205.0
9.14
G5006.0-M11
9.75
G50206.0
9.75
G5007.0-M11
10.63
G50207.0
10.63
G5008.0-M11
11.88
G50208.0
11.88
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Data sheet
Sheet No.: GHI 3.18 RevB
Date: August 2010
G-Series
Dimensions – (Hydraulic) In.
Double-Acting Actuators
Valve/Accessory Mounting Details
Adjustable End Stops
X
Extended
Travel Stop
Power Module
50.07
38.58
Blind End Cap Module
28.25
17.38
Spring Module
70.50
42.48
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in inches.
www.Bettis.com
X
End Stop
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Data sheet
Sheet No.: GHI 3.19 RevB
Date: August 2010
G-Series
Dimensions – (Hydraulic) In.
Spring-Return Actuators
G500X.X-SR (CW Model Shown)
Actuator Model
A
G5003.5-SR
7.63
G5004.0-SR
8.13
G5004.5-SR
8.63
G5005.0-SR
9.14
G5006.0-SR
9.75
G5007.0-SR
10.63
G5008.0-SR
11.88
G500X.X-SR-M11 (CW Model Shown)
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in inches.
www.Bettis.com
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Actuator Model
A
G5003.5-SR-M11
7.63
G5004.0-SR-M11
8.13
G5004.5-SR-M11
8.63
G5005.0-SR-M11
9.14
G5006.0-SR-M11
9.75
G5007.0-SR-M11
10.63
G5008.0-SR-M11
11.88
Data sheet
Sheet No.: GHI 3.20 RevB
Date: August 2010
Dimensions – (Hydraulic) In.
Spring-Return Actuators
Lug/Accessory Details
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in inches.
www.Bettis.com
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
G-Series
Data sheet
Sheet No.: GHI 3.21 RevB
Date: August 2010
G-Series
Dimensions – (Hydraulic) In.
Double-Acting Actuators
G70XX.X (CW Model Shown)
Actuator Model
A
G7004.0
8.13
G7004.5
8.88
G7005.0
9.63
G7006.0
10.38
G7007.0
11.38
G7008.0
12.12
G7009.0
13.38
G7010.0
14.12
G70XX.X-M11 or G702XX.X (No M11) (CW Model Shown)
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in inches.
www.Bettis.com
Actuator Model
A
Actuator Model
A
G7004.0-M11
8.13
G70204.0
8.13
G7004.5-M11
8.88
G70204.5
8.88
G7005.0-M11
9.63
G70205.0
9.63
G7006.0-M11
10.38
G70206.0
10.38
G7007.0-M11
11.38
G70207.0
11.38
G7008.0-M11
12.12
G70208.0
12.12
G7009.0-M11
13.38
G70209.0
13.38
G7010.0-M11
14.12
G70210.0
14.12
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Data sheet
Sheet No.: GHI 3.22 RevB
Date: August 2010
G-Series
Dimensions – (Hydraulic) In.
Double-Acting Actuators
Valve/Accessory Mounting Details
Adjustable End Stops
X
Extended
Travel Stop
Power Module
60.97
46.72
Blind End Cap Module
35.53
21.28
Spring Module
91.10
54.44
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in inches.
www.Bettis.com
X
End Stop
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Data sheet
Sheet No.: GHI 3.23 RevB
Date: August 2010
G-Series
Dimensions – (Hydraulic) In.
Spring-Return Actuators
G70XX.X-SR (CW Model Shown)
Actuator Model
A
G7004.0-SR
8.13
G7004.5-SR
8.88
G7005.0-SR
9.63
G7006.0-SR
10.38
G7007.0-SR
11.38
G7008.0-SR
12.12
G7009.0-SR
13.38
G7010.0-SR
14.12
Actuator Model
A
G7004.0-SR-M11
8.13
G7004.5-SR-M11
8.88
G70XX.X-SR-M11 (CW Model Shown)
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in inches.
www.Bettis.com
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
G7005.0-SR-M11
9.63
G7006.0-SR-M11
10.38
G7007.0-SR-M11
11.38
G7008.0-SR-M11
12.12
G7009.0-SR-M11
13.38
G7010.0-SR-M11
14.12
Data sheet
Sheet No.: GHI 3.24 RevB
Date: August 2010
Dimensions – (Hydraulic) In.
Spring-Return Actuators
Lug/Accessory Details
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in inches.
www.Bettis.com
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
G-Series
Data sheet
Sheet No.: GHI 3.25 RevB
Date: August 2010
G-Series
Dimensions – (Hydraulic) In.
Double-Acting Actuators
G80XX.X (CW Model Shown)
Actuator Model
A
G8005.0
11.12
G8006.0
11.50
G8007.0
12.00
G8008.0
12.42
G8009.0
13.50
G8010.0
14.50
G8012.0
15.75
G80XX.X-M11 or G802XX.X (No M11) (CW Model Shown)
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in inches.
www.Bettis.com
Actuator Model
A
Actuator Model
A
G8005.0-M11
11.12
G80205.0
11.12
G8006.0-M11
11.50
G80206.0
11.50
G8007.0-M11
12.00
G80207.0
11.75
G8008.0-M11
12.42
G80208.0
12.42
G8009.0-M11
13.50
G80209.0
13.50
G8010.0-M11
14.50
G80210.0
14.50
G8012.0-M11
15.75
G80212.0
15.75
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Data sheet
Sheet No.: GHI 3.26 RevB
Date: August 2010
G-Series
Dimensions – (Hydraulic) In.
Double-Acting Actuators
Valve/Accessory Mounting Details
Adjustable End Stops
X
Extended
Travel Stop
Power Module
70.94
54.39
Blind End Cap Module
40.66
24.92
Spring Module
112.04
71.00
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in inches.
www.Bettis.com
X
End Stop
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Data sheet
Sheet No.: GHI 3.27 RevB
Date: August 2010
G-Series
Dimensions – (Hydraulic) In.
Spring-Return Actuators
G80XX.X-SR (CW Model Shown)
Actuator Model
A
G8005.0-SR
11.12
G8006.0-SR
11.50
G8007.0-SR
12.00
G8008.0-SR
12.42
G8009.0-SR
13.50
G8010.0-SR
14.50
G8012.0-SR
15.75
G80XX.X-SR-M11 (CW Model Shown)
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in inches.
www.Bettis.com
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Actuator Model
A
G8005.0-SR-M11
11.12
G8006.0-SR-M11
11.50
G8007.0-SR-M11
12.00
G8008.0-SR-M11
12.42
G8009.0-SR-M11
13.50
G8010.0-SR-M11
14.50
G8012.0-SR-M11
15.75
Data sheet
Sheet No.: GHI 3.28 RevB
Date: August 2010
Dimensions – (Hydraulic) In.
Spring-Return Actuators
Lug/Accessory Details
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in inches.
www.Bettis.com
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
G-Series
Data sheet
Sheet No.: GHI 3.29 RevB
Date: August 2010
G-Series
Dimensions – (Hydraulic) In.
Double-Acting Actuators
G100XX.X (CW Model Shown)
Actuator Model
A
G10006.0
12.16
G10007.0
13.13
G10008.0
14.38
G10009.0
14.88
G10010.0
15.62
G10012.0
17.88
G10014.0
19.88
G100XX.X-M11 or G1002XX.X (No M11) (CW Model Shown)
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in inches.
www.Bettis.com
Actuator Model
A
Actuator Model
A
G10006.0-M11
12.16
G100206.0
12.16
G10007.0-M11
13.13
G100207.0
13.13
G10008.0-M11
14.38
G100208.0
14.38
G10009.0-M11
14.88
G100209.0
14.88
G10010.0-M11
15.62
G100210.0
15.62
G10012.0-M11
17.88
G100212.0
17.88
G10014.0-M11
19.88
G100214.0
19.88
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Data sheet
Sheet No.: GHI 3.30 RevB
Date: August 2010
G-Series
Dimensions – (Hydraulic) In.
Double-Acting Actuators
Valve/Accessory Mounting Details
Adjustable End Stops
Power Module
X
End Stop
89.08
80.08
Blind End Cap Module
C/F
C/F
Spring Module
C/F
C/F
C/F Consult Factory
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in inches.
www.Bettis.com
X
Extended
Travel Stop
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Data sheet
Sheet No.: GHI 3.31 RevB
Date: August 2010
G-Series
Dimensions – (Hydraulic) In.
Spring-Return Actuators
G100XX.X-SR (CW Model Shown)
Actuator Model
A
G10006.0-SR
12.16
G10007.0-SR
13.13
G10008.0-SR
14.38
G10009.0-SR
14.88
G10010.0-SR
15.62
G10012.0-SR
17.88
G10014.0-SR
19.88
G100X.X-SR-M11 (CW Model Shown)
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in inches.
www.Bettis.com
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Actuator Model
A
G10006.0-SR-M11
12.16
G10007.0-SR-M11
13.13
G10008.0-SR-M11
14.38
G10009.0-SR-M11
14.88
G10010.0-SR-M11
15.62
G10012.0-SR-M11
17.88
G10014.0-SR-M11
19.88
Data sheet
Sheet No.: GHI 3.32 RevB
Date: August 2010
Dimensions – (Hydraulic) In.
Spring-Return Actuators
Lug/Accessory Details
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in inches.
www.Bettis.com
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
G-Series
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement