D1 Series Multi-hole Cage Guided Control Valves Model D1M Overview

D1 Series Multi-hole Cage Guided Control Valves Model D1M Overview
No. SS2-D1M100-0100
D1 Series
Multi-hole Cage Guided Control Valves
Model D1M
Overview
Model D1M globe control valves are with bolted bonnet and
multi-hole cage guided trims. The design facilitates easy access to internal components, online inspection and maintenance.
Model D1M are provided with multiple spring diaphragms
and piston actuators.
Model D1M are widely applicable for reliable control, with
high shut-off and flow control performance.
Specifications
Body
Type
Straight-through, cast globe valve
Nominal size:
Pressure rating


End connection
ANSI Class 150, 300, 600
PN 25, 50, 100

V shaped PTFE (150 to 200°C)

Graphite (150 to 600°C)

Low fugitive emission (With PTFE and
graphite packing on request)
Inverted V shaped PTFE (For vacuum application)
Gasket
Flanged end: FF, RF, RJ, LG, SG, Tongue
and groove

Welding end: BW
Trim
Carbon steel: ASTM A216 Gr WCB, WCC,
WC6, WC9, C5, C12, LCB
Stainless steel: ASTM A351 Gr CF8, CF8M,
CF3, CF3M, CF8C
Alloy steel: Hastelloy C, Alloy 20, Nickel,
Titanium, Monel (For other materials,
consult your Azbil sales office.)
Stainless steel spiral wound with graphite
filled

Stainless steel spiral wound with PTFE
filled
Valve plug
Single seated, Pressure balance plug
Cage
Multi hole orifice design
-Metal seat: Equal percentage, Linear
-Soft seat: Equal percentage, Linear
Bonnet
Gland packing
Material
1-1/2, 2, 2-1/2, 3,4 ,5, 6, 8, 10, 12, 14, 16, 18, 20, 22,
24, 28, 30, 32, 36 inches
Gland type
Bolted gland

Plain type (0 to 230°C)

Extended plain type (-70 to 0°C)

Extended finned type (230 to 450°C)

Metal bellows type(0 to 450°C)
Note) Take care not to exceed the operating temperature ranges specified for respective materials.
Seat type
Metal seat, Soft seat
Material
1
 Stainless steel: ASTM A479 Type SS316, SS304,
SS316L, SS304L, SS904L
 Alloy steel: Hastelloy C, Alloy 20, Nickel, Titanium, Monel (For other materials, consult your
Azbil sales office.)
3rd edition
No. SS2-D1M100-0100
Azbil Corporation
Actuator
Type
Valve action
Air-to-close (Direct action actuator is combined.)
Air-to-open (Reverse action actuator is combined.)
Single acting diaphragm actuator (Model M)
Double acting piston actuator (Model PD
Optional accessories
Nitrile rubber with nylon insert
Positioner (pneumatic, smart type), pressure regulator with
filter, hand wheel, limit switch, motion transmitter, booster
relay, lock-up valve, and others.
Note) For the optional items, refer to the specification sheets
and installation drawings of respective accessories.
Additional specification (by special order)
Supply air pressure
1.4 to 6.0 kg/cm
Air connection
Ambient temperature
Action
Direct or reverse action
Diaphragm

Special inspection
Flow characteristics inspection, material inspection
(Material certificate), nondestructive inspection
Stainless steel (SUS304) Atmosphere-exposed nuts
and bolts

Special air piping and joint

Vacuum service
2
1/4”, 3/8”, 1/2” NPT internal thread
-40 to 80°C
Performance
Rated Cv value
Refer to Table 1
Flow characteristics
Inherent rangeability
Allowable differential pressure
Leakage specification
Equal percentage, linear, quick opening
30:1
Optional 50:1
Contact your Azbil sales office
Nominal
size
Pressure
rating
Class
1-1/2" to 12”
150/300/600
14” to 24”
Class
150/300/600
26” to 36”
Class
150/300
Seat leakage per
IEC60534-4 and
ANSI/FCI 70-2
Seat type
IV
Metal
IV
Metal
V
Metal
VI
RPTFE
III
IV
IV
Metal
Metal
2
Seal type
U seal ring
(Graphite-filled
PTFE)
Metal seal ring
U seal ring
(Graphite-filled
PTFE)
U seal ring
(Graphite-filled
PTFE)
Carbon ring
U seal ring
(Graphite-filled
PTFE)
U seal ring
(Graphite-filled
PTFE)
Temperature range
Up to 200 °C
Above 200 to 450°C
Up to 200 °C
Up to 200 °C
Above 200 to 450°C
Up to 200 °C
Up to 200 °C
No. SS2-D1M100-0100
Azbil Corporation
Hysteresis error
Weight
Without positioner: Within 5% F.S.
With positioner: Within 1% F.S.
Contact your Azbil sales office
Actuator orientation
Refer to Figure 2
Linearity
Without positioner: Within ±5% F.S.
With positioner: Within ±1% F.S.
Finish
Blue (Munsell 10B5/10) or silver, or other specified colors.
Dimensions
Refer to Figure 1, Table 2 and Table 3
Cv value and flow characteristics
Table 1. CV Value
Nominal size
inch
mm
1-1/2
40
2
50
2-1/2
65
3
80
4
100
6
150
8
200
10
250
12
300
14
350
16
400
18
450
20
500
22
550
24
600
28
700
30
750
32
800
36
900
Port size
inch
mm
1-1/2
40
1-1/4
32
1
25
2
50
1-1/2
40
1-1/4
32
2-1/2
65
2
50
1-1/2
40
3
80
2-1/2
65
2
50
4
100
3
80
2-1/2
65
6
150
5
125
4
100
8
200
6
150
5
125
10
250
8
200
6
150
12
300
10
250
8
200
14
350
12
300
10
250
16
400
14
350
12
300
18
450
16
400
20
500
18
450
22
550
20
500
24
600
22
550
28
700
26
650
30
750
28
700
32
800
30
750
36
900
34
850
Cv value
27
20
13
45
30
20
72
50
30
100
80
50
180
100
80
360
300
200
580
400
300
900
640
400
1200
1000
640
1620
1350
1000
2100
1800
1350
2750
2350
3100
2950
4100
3100
4950
3500
6300
5625
7380
6300
9000
6300
10000
9500
3
No. SS2-D1M100-0100
Azbil Corporation
a. For diaphragm actuator
b. For diaphragm actuator with
top hand wheel
c. For diaphragm actuator with
side hand wheel
ØD
d. For piston actuator
e. For piston actuator with side
hand wheel
Figure1 Face-to-face and external dimensions
4
No. SS2-D1M100-0100
Azbil Corporation
Table 2. Face-to-face dimensions
[Unit: mm]
F/F
Class
Class
Class
Nominal size
150RF
300RF
600RF
(inches)
(PN 20) (PN 50) (PN 100)
1-1/2
222
235
251
2
254
267
286
2-1/2
276
292
311
3
298
318
337
4
352
368
394
6
451
473
508
8
543
568
610
10
673
708
752
12
737
775
819
14
889
927
972
16
1016
1057
1108
18
1143
20
1267
22
1367
24
1556
28
1648
30
1724
32
1740
36
1956
Table 3. External dimension
[Unit: mm]
H
Nominal size
Actuator
With side
Pressure rating Without
φD
(inches)
Model No.
hand wheel hand wheel
Class 150/300
515
810
M-11
290
Class 600
545
845
1-1/2
Class 150/300
540
860
M-22
380
Class 600
570
890
Class 150/300
875
1310
6
M-33
448
Class 600
910
1355
Class 150/300
950
1370
8
M-34
600
Class 600
1010
1465
Class 150/300
1210
1680
10
M-44
600
Class 600
1260
1730
Class 150/300
1390
1820
12
M-44
600
Class 600
1430
1865
*
*
Class 150/300
600
14
M-44
*
*
Class 600
Class 150/300
1480
2010
16
M-44
600
Class 600
1520
2060
PD-200-178
Class
1140
1540
262
18
PD-250-178 150/300/600
1160
1580
325
PD-200-178
Class
1480
1740
262
20
PD-250-178 150/300/600
1522
2140
325
PD-250-198
Class
1720
2320
325
22
PD-300-198 150/300/600
1790
2490
380
PD-250-198
Class
1935
2685
325
24
PD-300-198 150/300/600
1980
2730
380
PD-300-308
Class
2220
3020
380
28
PD-350-308 150/300/600
2280
3180
418
PD-300-308
Class
2450
3250
380
30
PD-350-308 150/300/600
2570
3250
418
PD-300-308
Class
2608
3350
380
32
PD-350-308 150/300/600
2690
3450
418
PD-300-308
Class
2800
3550
380
36
PD-350-308 150/300/600
2840
3620
418
*Contact your Azbil sales office.
5
No. SS2-D1M100-0100
Azbil Corporation
Actuator orientation
Diaphragm actuator
Side-mounted
hand wheel
Flow
direction
Side-mounted
hand wheel
Positioner
Flow
direction
Side-mounted
hand wheel
Positioner
Flow
direction
Flow
direction
Side-mounted
hand wheel
Positioner
Flow
direction
Flow
direction
No.1 (Standard type)
Positioner
Flow
direction
No.2
Positioner
Side-mounted
hand wheel
Positioner
Flow
direction
No.3
No.4
Piston actuator
Flow
direction
Positioner
Side handle
Flow
direction
No. 1 (Standard type)
Side handle
Flow
direction
Positioner
Side handle
Positioner
Flow
direction
Flow
direction
Flow
direction
Flow
direction
No. 2
Positioner
Side handle
Side handle
Flow
direction
No. 3
Positioner
Positioner
No. 4
Note) Indicate by position number when installation other than the standard type is required.
Figure2 Actuator orientation
Ordering information
When ordering, please specify;
1)
2)
3)
4)
5)
6)
7)
8)
9)
10) Special requirement of degreasing, free from
copper and etc.
11) Name of flow medium
12) Normal flow and maximum required flow
13) Pressure of flow medium upstream and downstream pressure at maximum and minimum,
required flow
14) Temperature and specific gravity of flow medium
15) Viscosity of flow medium, inclusive or exclusive
of slurry
Model Number: D1M
Nominal size × Port size
Type and rating of end connections
Body and trim material, necessity of hardening
Type of bonnet
Valve and plug characteristics
Type of actuator, air to diaphragm
Valve action (direct or reverse)
Accessories (positioner, hand wheel, pressure
regulator etc.)
6
No. SS2-D1M100-0100
Azbil Corporation
7
No. SS2-D1M100-0100
Azbil Corporation
Please, read ‘Terms and Conditions’ from following URL before
the order and use.
http://www.azbil.com/products/bi/order.html
Specifications are subject to change without notice.
Sold by:
Manufactured and Sold by:
1-12-2 Kawana, Fujisawa
Kanagawa 251-8522 Japan
URL: http://www.azbil.com/
P.O.Box 68683
Dammam 2nd Industrial City, Dammam 31537
Kingdom of Saudi Arabia
(2)
8
1st edition: Aug. 2014
3rd edition: Aug. 2015
No part of this publication may be reproduced or duplicated
without the prior written permission of Azbil Corporation.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement