OTX-1DVI-SD DVI Video, RS-232, Stereo Audio Fiber Optic Extender

OTX-1DVI-SD DVI Video, RS-232, Stereo Audio Fiber Optic Extender
OTX-1DVI-SD
DVI Video, RS-232, Stereo Audio Fiber Optic Extender
Uncompressed DVI, Audio and RS-232 Over One Optical Fiber
The OTX-1DVI-SD optical extender is a single fiber DVI extender that can send
1 channel of DVI video, 1 channel of serial data and 2 channels of analog audio
up to 10 km, without the need for distribution amplifiers, cable equalization or
in-line repeaters that are normally associated with copper cable extension.
The extender is an insert card that transports over standard multimode or
singlemode fiber using LC type optical connectors for a secure cable connection.
Graphic resolutions up to 1920x1200/60Hz and video resolutions up to
1080p/60Hz are possible over a single fiber.
Features
„
Extends DVI-D video resolutions
up to 1920x1200 and 1080p/60Hz
„
„
The OTX-1DVI-SD Tx and Rx are
compatible with the VX Pro Series of
modular transmitters and receivers,
Extends analog stereo audio along with video
providing the needed flexibility for
and serial data
applications requiring both modular
Compatible with VX Pro Series of
insert cards and stand-alone modules.
Transmitters and Receivers
„
Fits Optiva enclosures
„
True Plug & Play - Passes CEC, EDID & HDCP,
No EDID Learning Necessary
True Plug & Play with HDCP
No more EDID learning or blanked out
screens! Critical EDID information is read directly from the monitor and passed
Diagnostic LED for power and fiber
to the graphics card via the duplex data channel. The OTX-1DVI-SD can work on
communication status
any digital display and provide resolutions up to 1920x1200. The OTX-1DVI-SD
„
HDCP V1.2 compliant. HDCP over DVI
is also HDCP compliant allowing the exchange of keys between the source and
„
Multimode operation up 305 m using OM3 fiber
„
Singlemode operation up to 10 km
„
Uses low profile LC optical connector
„
Transmitter powered via pin 14 of graphics
„
display. Copyrighted material can be sent over the fiber link.
Enclosure Options
card
Applications
„
Command and Control Centers
„
Medical OR Integration / Endoscopy
„
Airport / Train / Information Displays
„
Digital Signage / Video Walls
„
Classrooms
969 Horsham Road
l
Horsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543
l
info@tonercable.com
OTX-1DVI-SD
DVI Video, RS-232, Stereo Audio Fiber Optic Extender
Models
General
DVI Unit Transmitter
DVI Unit Receiver
Specifications
Values
OTX-1DVI-SD/XMT-XX-LC
OTX-1DVI-SD/RCV-XX-LC
Dimensions (Insert Card)
6.3”D x 0.8”W x 4.0”H
Weight
11 oz.
Operating Temperature
0˚ to +50˚C
Storage Temperature
20˚C to +85˚C
Humidity
10 to 90% (non-condensing)
„
When ordering replace “XX” with one of the Fiber Type Options
„
Chromatic dispersion as well as other losses should also be taken into account
„
Stated distances are the maximum range, shorter distance may require attenuation
„
Standard connection type is UPC
„
Multimode TX must be used with multimode RX and singlemode TX must be used with singlemode RX
Power Consumption
<2W Max.
Monitoring
LED on TX & RX
Rapid flash - Boot up
Slow flash - Fiber disconnected
Steady on - Link established
Warranty
3 Years
Optical Specifications
Fiber Type
“XX”
Wavelength
(nm)
Data Rate
Optical Budget
(db)
Distance
(km)
Connector
MM
850/1310/1550
6.25 Gbps
<12
0.3
LC
SM
1490/1550/1310
6.25 Gbps
<12
10
LC
Video
Connection Diagram
Specifications
Values
Standards
DVI standard resolutions up to
WUXGA
Resolutions
(see chart on front side)
Connector Type
Single Link DVI-D (18 pin male)
HDCP Compliance
v1.2
EDID
Plug & Play
Color Depth
24-bit
Audio
DVI Input
DVI Output
Stereo Audio
Input
Stereo Audio
Output
Specifications
Values
Inputs/Outputs
Unbalanced audio 2 channel (1L/1R)
Channels
24-Bit Dual Channel
Impedance
47k Ohm Unbalanced
Audio Levels
700 mVrms (maximum)
Frequency Response
20 Hz to 20 KHz (±0.1 dB)
Signal-to-Noise Ratio
> 80 dB @ 1KHz
Total Harmonic Distortion
< 0.1% @ 1KHz
Crosstalk
>70dB @ 10KHz
Connector Type
3.5mm Stereo Headphone Jack
RS-232
RS-232
Data
LC Optical Connectors
OTX-1DVI-SD/XMT-XX-LC
Specifications Subject To Change Without Notice
969 Horsham Road
l
OTX-1DVI-SD/RCV-XX-LC
Specifications
Values
Serial Data
1 Channel RS-232
Connector Type
Terminal block (3 pin)
Compliance (Pending)
©Toner Cable Equipment, Inc.
Rev 06-13
Horsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543
l
info@tonercable.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising