Light Management Systems: Components. Non-system-specifi c components for expanding, connecting or

Light Management Systems: Components. Non-system-specifi c components for expanding, connecting or
www.osram.com/lms
Light Management Systems:
Components.
Non-system-specific components for expanding, connecting or
installing light management products.
LMS COMPONENTS
Expand, connect and install with non-systemspecific components.
Everything from a single source. The complete OSRAM LMS range offers products for almost all types
of modern lighting control – and the appropriate accessories for simple expansion, connection and
installation of our innovative light management systems.
This includes:
• Signal repeaters
• Signal amplifiers
• Signal converters
• Radio-controlled components
• Connectors
• Installation kits
2
PRODUCT OVERVIEW
Signal repeaters /amplifiers.
DALI® repeaters provide the expanding DALI® systems. They are addressable,
which means that the repeaters can be individually controlled and configured
within an installation. The ECGs connected to the repeater operate automatically
as a group with a uniform dimmer setting. In Touch DIM® mode, the repeater
operates as an independent controller for manual control of any DALI® ECG,
using standard switches. Using a DMX signal repeater means increasing the
number of DMX devices and extend the length of the DMX signal cable. Signal
amplifiers operate in conjunction with controllers, enabling a larger number of
ECGs to be connected to the controller.
DALI® REP LI.
• Expansion of DALI® systems by 64 ECGs each time
• Device for luminaire installation (independent installation possible with
LMS CI BOX)
• Extends the DALI® line by 300 m
• Touch DIM® control of 64 DALI® ECGs
• Power input: max. 4 W
DALI® REP SO.
• Expansion of DALI® systems by 64 ECGs each time
• DIN rail housing
• Extends the DALI® line by 300 m
• Touch DIM® control of 64 DALI® ECGs
• Standby consumption: max. 1 W
• Integrated load contact for disconnecting the ECG supply on standby
(Greenswitch)
DMX ISOLATED REPEATER.
• Increase signal cable length > 300 m
• Increase number of DMX devices by 32
• Integrated isolated barrier and galvanic separation between lighting zones
• Repetition of DMX (one way) and RDM (bi-directional) signals
• Supply voltage: 9– 48 V DC
DIM SA.
• Signal amplifier for 1…10 V controllers and sensors
• Supports large luminaire groups and long control lines
• Load capacity of the signal output: max. 100 mA/100 OSRAM 1…10 V ECGs
or 33 further DIM SA signal amplifiers
3
PRODUCT OVERVIEW
Converters.
DALI® converters are multifunctional units. They convert digital DALI® signals to
analog 1…10 V signals. Alternatively, the separate Touch DIM® input allows singleswitch control of the connected 1…10 V ECG. DALI® converters can also be
used purely as DALI® switching actuators. The DMX to DALI® converter allows
easy integration of DALI® ballasts in DMX installations. Non-dimmable loads are
also be integrable.
DALI® CON 1…10 LI.
• Converter for installation in luminaires
• Load capacity of the signal output: max. 100 mA/100 OSRAM 1…10 V ECGs
or 33 DIM SA signal amplifiers or 0…10 V max. 5 mA active
• Switchable characteristic: linear/logarithmic
• Load capacity of switching contact: 5 A
DALI® CON 1…10 SO.
• Converter for snap-on
• Load capacity of the signal output: max. 100 mA/100 OSRAM 1…10 V ECGs
or 33 DIM SA signal amplifiers or 0…10 V max. 5 mA active
• Switchable characteristic: linear/logarithmic
• Load capacity of switching contact: 5 A
DMX CONVERTER DALI® SO.
• DIN RAIL housing
• 6 DALI® broadcast output channels for up 96-ECG
• Manual and auto DMX addressing mode
• Immediate ignition of FL lamps by user selectable permanent filament
preheating (in combination with QTi DALI® ECG)
• Number of DMX channels (1– 6) to be converted
• Automatic amplification of DMX output signal
DALI® SWITCH SO.
• DIN rail housing
• 3 independent load contacts
• Up 6 A ohmic load
• Supplied by 24 V DC (e. g. 24 V power supply for DIN rail mounting PS30)
4
Radio receiver.
Touch DIM® RC.
• Radio receiver for batteryless EnOcean radio switches for 2 lighting groups
• Dimming without a control line by means of maintenance-free radio technology
• Power draw: max. 1.5 W
• Frequency band: 868.3 MHz
• 2 floating semiconductor relay outputs: max. 45 mA/240 V
• Up to 15 QTi DALI® ECGs, OTi DALI® ECGs or HTi transformers can be
connected per output
• Up to 30 wall transmitters can be trained
SWITCH RC.
• Suitable for all OSRAM control elements and sensors with EnOcean radio
technology
• Choice of 5 different operating modes
• Adjustable switch-off delay: 1 to 20 min
• Range: up to 30 m (up to 5 walls) or 100 m (no walls)
• Switching by means of maintenance-free EnOcean radio technology
• Frequency band: 868.3 MHz
• Up to 8 sensors and 8 wall-mounted/hand-held transmitters can be trained
• Up to 14 ECGs can be connected
5
PRODUCT OVERVIEW
Radio transmitters.
Touch DIM® WCU – 2-channel radio switch.
• Batteryless radio switch for up to 2 lighting groups
• Dimming without a control line by means of
maintenance-free radio technology
• Frequency band: 868.3 MHz
• Output power: 10 mW
• Batteryless operation thanks to inductive power
generation
Touch DIM® RMC – 4-channel radio remote control.
• Batteryless radio remote control for up to 4 lighting
groups
• Dimming without a control line by means of
maintenance-free radio technology
• Frequency band: 868.3 MHz
• Output power: 10 mW
• Batteryless operation thanks to inductive power
generation
Y-connectors.
Y-connectors are used to link multiple controllers and connect additional system components.
Y-CONNECTOR.
• Passive distributor
• Connections: 3 × modular 4p4c socket
• 2 connecting cables included, modular 4p4c connector
on both ends, length 2.1 m
• Enables synchronization of multiple EASY control units
and connection of further EASY system components
• Enables parallel connection of multiple sensors to a
MULTIeco/MULTI 3 system
• Option for adhesive pad mounting
6
Y-CONNECTOR SCREW.
• Passive distributor
• Connections: 2 × four-pin screw terminal, 2 × modular
4p4c socket
• 2 connecting cables included, modular 4p4c connector
on both ends, length 2.1 m
• Enables multiple MULTIeco/MULTI 3 systems to be
connected to central presence detection.
• Enables standard cables to be used for EASY, MULTI 3
and MULTIeco systems
• Option for adhesive pad mounting
PS 30/100–240/24 SO.
Power supply for 24 V components.
• DIN rail housing
• 1.3 A output current
• Input voltage 100…240 V AC
DALI® MAGIC.
Testing, analysis and programming of DALI® ballasts and DALI® installations.
• Standard interface DALI®/USB
• Central control, analysis and programming of DALI® systems (e. g. reading and writing of
DALI® device configurations) by using “DALI® wizard“ software
• “DALI®-Spy“ functionality for recording data flow on the DALI® line by means of software
“DALI® wizard”
• Programming of OSRAM ECGs with 3DIM functionality by using “3DIM Tool” software
7
PRODUCT OVERVIEW
LMS CI BOX.
• Cable clamp casing for independent mounting
of all OSRAM controllers with dimensions 189 × 30 × 21 mm (L × W × H)
SENSOR KIT.
• Adapter for surface mounting sensor elements with a diameter of 50 mm
MOUNTING ADAPTER.
• Adapter for surface mounting sensor elements with a diameter of 116 mm
ECO CI KIT.
• Cable clamp kit for independent mounting of all OSRAM controllers with
dimensions of 118 × 30 × 21 mm (L × W × H)
8
ORDER OVERVIEW
Technical drawing
Product reference
Order reference
Product number
Dimensions
DALI® Repeater LI
DALI® REP LI
4008321292599
189 × 30 × 21 mm
(L × W × H)
DALI® Repeater SO
DALI® REP SO
4008321301093
72 × 96 × 62 mm
(L × W × H)
DMX Isolated Repeater
DMX ISOLATED
REPEATER
4008321621832
80 × 71 × 24 mm
(L × W × H)
Signal amplifier
DIM SA
4008321097095
189 × 30 × 30 mm
(L × W × H)
DALI® converter
Luminaire installation
DALI® CON 1…10 LI
4050300638973
190 × 30 × 27 mm
(L × W × H)
DALI® converter (4TE)
Snap-on
DALI® CON 1…10 SO
4050300639802
72 × 90 × 64 mm
(L × W × H)
DMX converter DALI® SO
DMX CONVERTER
DALI® SO
4008321532336
107 × 76 × 59 mm
(L × W × H)
DALI® Switch SO
DALI® SWITCH SO
4008321533364
96 × 54 × 62 mm
(L × W × H)
2-channel radio receiver
Touch DIM® RC
4008321031938
189 × 30 × 21 mm
(L × W × H)
1-channel radio receiver
SWITCH RC
4008321385642
45 × 37 × 23 mm
(L × W × H)
2-channel radio switch
Touch DIM® WCU
4008321032737
80 × 80 × 20 mm
(L × W × H)
4-channel radio remote
control
Touch DIM® RMC
4008321183033
82 × 49 × 20 mm
(L × W × H)
Y-connector
Y-CONNECTOR
4008321803135
34 × 18 × 16
(L × W × H)
Y-connector with screw terminals
Y-CONNECTOR SCREW
4008321916686
40 × 20 × 16 mm
(L × W × H)
w
h
l
w
h
w
l
w
w
w
h
l
h
w
w
l
Graphic
l
w
h
l
h
w
9
ORDER OVERVIEW
Graphic
Technical drawing
+ + – –
OUTPUT
DC 24 V/1.3 A
L1 N
Product number
Dimensions
Power supply
PS 30/24 V
4008321555311
90 × 54 × 58 mm
(L × W × H)
Analysis and programming tool
DALI® MAGIC
4008321582768
120 × 79 × 28 mm
(L × W × H)
Installation kit
LMS CI BOX
4008321083692
261 × 71/35 × 27 mm
(L × W × H)
Adapter for surface mounting
SENSOR KIT
4008321916662
80 × 25 mm
(Ø × H)
Mounting adapter
MOUNTING ADAPTER
4008321480798
116 × 19 mm
(Ø × H)
Installation kit
ECO CI KIT
4008321392091
–––––
h
Order reference
w
INPUT
AC 100–240 V
l
Product reference
–––––
w
h
l
h
h
Ø
Ø
–––––
10
COMBINATION POSSIBILITIES – COMPONENTS / SYSTEMS
SYSTEMS
Components
Sensors
Touch DIM® (TD)
MULTIeco
MULTI 3
EASY Color Control
MCU
DALI® BASIC
DALI® PROFESSIONAL
DALI® REP LI
DALI® REP SO
DMX ISOLATED REPEATER
DIM SA
DALI® SWITCH SO
DALI® CON 1…10 LI
DALI® CON 1…10 SO
DMX CONVERTER DALI® SO
Y-CONNECTOR
Y-CONNECTOR SCREW
LMS CI BOX
SENSOR KIT
MOUNTING ADAPTER
ECO CI KIT
PS 30/24 V
DALI® MAGIC
TOUCH DIM® RC
SWITCH RC
TOUCH DIM® WCU
TOUCH DIM® RMC
11
SYSTEM GUARANTEE / INFO
System guarantee.
Only from OSRAM: System+ Guarante
ee for unique security and quality.
OSRAM offers an extensive three-stage guarantee
g
for light man
nagement systems and
ECG/lamp systems from OSRAM. All the details on the relevant products, registration
and the guarantee requirements can be fo
ound at: www.osram.c
com/system-guarantee
Ambience
➔ EASY Color and white light control for shop and hospitality
Scenes
➔ For multifunctional management of lighting groups and lighting scenes
Components
➔ For expanding, connecting or installing light management products
Light Source Control Gears
➔ For safe, efficient and reliable lamp/luminaire operation
LMS from OSRAM: LMS folder.
Compilation of product brochures on every LMS topic, including
a poster, an application matrix and a CD-ROM, bundled in a folder.
1FZW002GB 10/11 VO OSRAM CRM M
MK AB
Energy saving
➔ For energy-saving daylight-dependent and presence-dependent lighting
Subject to change without notice. OSRAM does not accept liability for errors, changes and omissions.
The perfect solution: the OSRAM LMS product portfolio.
To reflect the principal application requirements, OSRAM’s LMS product portfolio is structured in the following
five categories:
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement