ISIR08-um0

ISIR08-um0
Technical Specifications
IR-7S/IR-7B/IR-5C
Power
AC 120V~60Hz or AC 230/240/250V~50/60Hz
Fuse
20mm Glass 10A Fast Blow
Lamp
MSD 250/2 GY9.5
695 x 340 x 250 mm (IR-7S/IR-7B)
Dimension
360 x 340 x 250 mm (IR-5C)
15 kg (IR-7S/IR-7B)
Weight
9.2kg (IR-5C)
IR-6SD/IR-6BD
Power
Fuse
Lamp
Dimension
Weight
AC 120V~60Hz
20mm Glass 7A Fast Blow
CDM 150W
695 x 340 x 250 mm
10.7 kg
AC 230/240/250V~50/60Hz
IR-6S/IR-6B/IR-5S/IR-5B/IR-4C
Power
Fuse
Lamp
Dimension
Weight
AC 120V~60Hz
AC 230/240/250V~50/60Hz
20mm Glass 6.3A Fast Blow
20mm Glass 5A Fast Blow
ELC 24V 250W
695 x 340 x 250 mm (IR-6S/6B/5S/5B)
360 x 340 x 250 mm (IR-4C)
10.6 kg (IR-6S/IR-6B/IR-5S/IR-5B)
8 kg (IR-4C)
IS-6S/IS-6B/IS-3/IS-4
Power
Fuse
Lamp
Dimension
Weight
AC 120V~60Hz
AC 230/240/250V~50/60Hz
20mm Glass 6.3A Fast Blow
20mm Glass 5A Fast Blow
ELC 24V 250W
685 x 380 x 200 mm (IS-6S/IS-6B)
375 x 380 x 200 mm (IS-4/IS-3)
9.4 kg (IS-6S/IS-6B)
7.5 kg (IS-4/IS-3)
Innovation , Quality , Performance
User Guide
Professional Entertainment Technology
.
7. Fixture Cleaning
The cleaning of internal and external optical lenses and/or mirrors must be carried out
periodically to optimize light output. Cleaning frequency depends on the environment in which
TABLE OF CONTENTS
the fixture operates: damp, smoky or particularly dirty surrounding can cause greater
accumulation of dirt on the unit’s optics.
1. Safety Instruction
Ÿ Clean with soft cloth using normal glass cleaning fluid.
Ÿ Always dry the parts carefully.
2. Technical Specification
Ÿ Clean the external optics at least every 20 days. Clean the internal optics at least every
2.1 Inserting/Exchanging rotating gobos
30/60 days.
2.2 Beam Angle
3. Lamp
EC Declaration of Conformity
4. How To Set The Unit
We declare that our products (lighting equipments) comply with the following
4.1 Control Panel
specification and bears CE mark in accordance with the provision of the
4.2 Main Function
5. How To Control The Unit
Electromagnetic Compatibility (EMC) Directive 89/336/EEC.
2F
EN55014-2: 1997 A1:2001, EN61000-4-2: 1995; EN61000-4-3:2002;
5.1 Master/Slave Built-In Preprogrammed Function
EN61000-4-4: 1995; EN61000-4-5: 1995, EN61000-4-6:1996,
5.2 Easy Controller
5.3 iSolution Operation / Universal DMX Controller
5.4 Universal DMX Controller
5.5 DMX512 Configuration
5.6 DMX512 Connection
6. Troubleshooting
EN61000-4-11: 1994.
&
Harmonized Standard
EN60598-1: 2000+ALL:2000+A12:2002
Safety of household and similar electrical appliances
Part 1 : General requirements
7. Fixture Cleaning
6. Troubleshooting
1. Safety Instruction
Please read carefully the instruction, which includes important
Following are a few common problems that may occur during operation. Here are some
information about installation, operation and maintenance.
suggestions for easy troubleshooting:
WARNING
♦
A. The unit does not work, no light and the fan does not work
Please keep this User Guide for future consultation. If you sell the unit to another
user, be sure that they also receive this user guide.
1. Check the connect power and main fuse.
2. Measure the mains voltage on the main connector.
♦
Unpack and check carefully there is no transportation damage before using the unit.
3. Check the power on LED.
♦
Before operating, ensure that the voltage and frequency of power supply match the
power requirements of the unit.
B. Not responding to DMX controller
♦
1. DMX LED should be on. If not, check DMX connectors, cables to see if link properly.
It’s important to ground the yellow/green conductor to earth in order to avoid electric
shock.
2. If the DMX LED is on and no response to the channel, check the address settings and
DMX polarity.
3. If you have intermittent DMX signal problems, check the pins on connectors or on PCB of
♦
The unit is for indoor use only. Use only in a dry location.
♦
The unit must be installed in a location with adequate ventilation, at least 50cm from
adjacent surfaces. Be sure that no ventilation slots are blocked.
the unit or the previous one.
4. Try to use another DMX controller.
♦
Disconnect main power before fuse/lamp replacement or servicing.
5. Check in the DMX cables run near or run alongside to high voltage cables that may
♦
Replace fuse/lamp only with the same type. Do not use any other type of lamp.
♦
Make sure there is no flammable materials close to the unit while operating as it is
cause damage or interference to DMX interface circuit.
C. Some units don’t respond to the easy controller
1. You may have a break in the DMX cabling. Check the LED for the response of the
3F
fire hazard.
♦
but always by taking its base.
master/ slave mode signal.
2. Wrong DMX address in the unit. Set the proper address.
♦
♦
cool down before replacing bulb or serving as the unit could be very hot.
E. One of the channels is not working well
♦
damage or malfunction. Please contact the nearest authorized technical assistance
F. The lamp is cutting out intermittently
center. Always use the same type spare parts.
1. The lamp is not working well. Check the main voltage either too high or too low.
head.
In the event of serious operating problem, stop using the unit immediately. Never try
to repair the unit by yourself. Repairs carried out by unskilled people can lead to
2. The motor’s drive IC on the PCB might be out of condition.
2. Internal temperature may be too high. Check and if necessary replace the fan on the
Unit surface temperature may reach up to 85C. Don’t touch the housing bare-hand
during its operation. Turn off the power and allow about 15 minutes for the unit to
2. Check microphone to see if it is good by tapping the microphone
1. The stepper motor might be damaged or the cable connected to the PCB is broken.
Maximum ambient temperature is TA: 40℃. Don’t operate it where the temperature
is higher than this.
D. No response to the sound
1. Make sure the unit that does not receive DMX signal.
Use safety cable when fixes this unit. Don’t handle the unit by taking its head only,
♦
Don’t connect the device to any dimmer pack or power pack.
♦
Do not touch any wire during operation as high voltage might be causing electric
shock.
.
5.5 DMX512 Connection
The DMX512 is widely used in intelligent lighting control, with a maximum of 512 channels.
Warning
♦
To prevent or reduce the risk of electrical shock or fire, do not expose the unit to rain or
moisture.
♦
Never touch bulb with bare fingers as it is very hot after using.
♦
Hot lamp explosion hazard. Do not open the unit within five minutes after switching off.
♦
Do not start on the unit without bulb enclosure or housing are damaged.
♦
The housing, the lenses, or the ultraviolet filter must be replaced if they are visibly
damaged.
♦
Do not look directly at the light while the bulb is on.
Caution
There are no user serviceable parts inside the unit. Do not open the housing or attempt
any repairs yourself. In the unlikely event your unit may require service, please contact
your nearest dealer.
Installation
The unit should be mounted via its screw holes on the bracket. Always ensure that the unit is
4F
1.If you using a controller with 5 pins DMX output, you need to use a 5 to 3 pin adapter-cable.
2.At last unit, the DMX cable has to be terminated with a terminator. Solder a 120 ohm 1/4W
firmly fixed to avoid vibration and slipping while operating. Always ensure that the structure to
resistor between pin 2(DMX-) and pin 3(DMX+) into a 3-pin XLR-plug and plug it in the
which you are attaching the unit is secure and is able to support a weight of 20 kgs for each
DMX-output of the last unit.
unit.
3.Connect the unit together in a `daisy chain` by XLR plug from the output of the unit to the
input of the next unit. The cable can not branched or split to a `Y` cable. DMX512 is a very
high-speed signal. Inadequate or damaged cables, soldered joints or corroded connectors
can easily distort the signal and shut down the system.
4.The DMX output and input connectors are pass-through to maintain the DMX circuit, when
power is disconnected to the unit.
5.Each lighting unit needs to have an address set to receive the data sent by the controller.
The address number is between 0-511 (usually 0 & 1 are equal to 1).
6.The end of the DMX512 system should be terminated to reduce signal errors.
7.3 pin XLR connectors are more popular than 5 pin XLR.
3 pin XLR: Pin 1: GND, Pin 2: Negative signal (-), Pin 3: Positive signal (+)
5 pin XLR: Pin 1: GND, Pin 2: Negative signal (-), Pin 3: Positive signal (+)
IS-3
2. Technical Specification
• Voltage:AC 120V~60Hz or 230V/240V/250V~50/60Hz
• Bulb:MSD 250/2 GY9.5 (IR-7S/IR-7B/IR-5C)
CDM 150W (IR-6SD/IR-6BD)
ELC 24V 250W (IR-6S/IR-6B /IR-5S/IR-5B/ IR-4C/IS-6S/IS-6B/IS-4/IS-3)
• The unit is DMX512 fixture. It features full DMX512 control. It can also be linked together in
master/slave connection, as many as required in and run by built-in program chase
sequences automatically or by sound activation through an internal microphone to create an
intelligent effect.
• It can be operated by DMX512 control or can be used as an individual unit without a
controller.
• Consistent DMX channel enable iRock, iShow and iMove to be link together.
• Features different preprogrammed chase patterns.
• Please use a 3 pin XLR cable/plug when connecting units together.
• Accurate focusable optics system and ultra smooth stepping motors. Fan cooling.
• Pan : 180 deg. Tilt : 70 deg. (IR-7S/IR-7B/IR-6SD/IR-6BD/IR-6S/IR-6B/IR-5S/IR-5B/
IS-6S/IS-6B)
• IR-7S/IR-7B Independent gobo wheel with 7 rotating, replaceable gobos plus open,
5F
including 4 metal, 2 glass and 1 effect gobos with shaking effect, Independent color wheel
with 9 dichroic colors with rainbow effect, and independent shutter & dimmer.
• IR-6S/IR-6B Independent gobo wheel with 14 gobos plus open and blackout, including 10
metal, 1 replaceable gobo, 2 glass and 1 effect gobos with shaking effect, Independent
color wheel with 11 dichroic colors with rainbow effect, and independent shutter & dimmer.
(IR-5S/IR-5B without dimmer).
• IR-5C Independent gobo wheel with 7 rotating, replaceable gobos plus open, including 1
metal, 2 glass, 1 effect, 1 frost gobos, and 2 color temperature filters (5600k & 3200k) with
shaking effect, Independent color wheel with 9 dichroic colors with rainbow effect, and
independent shutter & dimmer.
• IR-4C Independent gobo wheel with 14 gobos plus open and blackout, including 7 metal, 1
replaceable, 1 effect, 1 frost, 2 glass, gobos, and 2 color temperature filters (5600k &
3200k), with shaking effect, Independent color wheel with 11 dichroic colors with rainbow
effect, and independent shutter & dimmer.
• IS-6S/IS-6B/IS-4 Professional multi-gobo rotator 14 gobos plus open and blackout, including
10 metal, 1 replaceable gobo, 2 glass and 1 effect gobos, with shaking and shutter effect,
Independent color wheel with 11 dichroic colors with rainbow effect.
• IS-3 Professional multi-gobo rotator 14 gobos/colors plus open and blackout, including 10
metal, 1 replaceable gobo, 2 glass and 1 effect gobos, with shaking and shutter effect.
2.1 Inserting/Exchanging rotating gobos
IS-6S/IS-6B/IS-4 ( IS-4 is a 4 channel gobo rotator )
( For IR-7S/IR-7B/ IR-5C only ! )
DANGER!
Install the gobos with the device switched off only.
Unplug from mains before!
Open the cover by loosening the fastening screw at the sides of the cover.
If you wish to use other forms and patterns as the standard-gobos, or if the gobos are to be
exchanged, remove the fixation ring with an appropriate tool. Remove the gobo and insert the
new gobo. Press the fixation-ring together and insert it in the front of the gobo.
6F
CAUTION!
Never unscrew the screws of the rotating gobo as the ball bearing
will otherwise be opened!
IR-6SD/IR-6BD/IR-6S/IR-6B/IR-5S/IR-5BIR-4C ( IR-4C is a 4 channel color changer)
2.2 Beam Angel
7F
3. Lamp
IR-7S/7B/5C ( IR-5C is a 5 channel color changer )
In case of replacement of the lamp or maintenance, do not open the
fixture within 15 minutes until the unit cools down after switching off.
MSD 250/2 GY 9.5 (IR-7S/7B/IR-5C)
CDM 150W ( IR-6SD/ IR-6BD )
ELC 24V 250W (IR-6S/IR-6B/IR-5S/IR-5B/ IR-4C/IS-6S/IS-6B/IS-4/IS-3)
Diagram for lamp changing
Because of its high internal pressure, there might be a
risk that the Discharge lamp would explode during
operation. The lamp emits intense UV radiation which
is harmful to the eyes and skin. The high luminance of
the arc can cause severe damage to the retina if looks
directly at the lamp.
MSD 250/2
1. Always switch off the main supply and never handle
CDM 150W
the lamp or luminaries when is hot.
8F
2. Do not touch the bulb with bare hands. If this
happens, clean the lamp with denatured alcohol and
wipe it with a lint free cloth before installation.
3. The lamp generates UV radiation. Never operate the
lamp without appropriate shielding.
4. When burning, the lamp operates at high pressure and
there is a slight risk of arc tube rupture. The risk
increases with age, temperature and improper
handling of the lamp. Do not use the lamp any
longer than its specified life.
Make sure the lamp is located in the center of the
reflector for the best spot.
ELC 24V 250W
ELC 24V 250W
65. 4 DMX512 Configuration
4. How To Set The Unit
Model
CH1
CH2
CH3
CH4
CH5
CH6
CH7
IR-7S
Pan
Tilt
Shutter
/Shaking
Gobo
Color
Gobo
Rotation
Dimmer
IR-7B
Pan
Barrel
Rotation
Shutter
/Shaking
Gobo
Color
Gobo
Rotation
Dimmer
IR-6SD/6S Pan
Tilt
Shutter
/Shaking
Gobo
Color
No
Function
Dimmer
IR-6BD/6B Pan
Barrel
Rotation
Shutter
/Shaking
Gobo
Color
No
Function
Dimmer
IR-5S
Pan
Tilt
Shutter
/Shaking
Gobo
Color
IR-5B
Pan
Barrel
Rotation
Shutter
/Shaking
Gobo
Color
IR-5C
Shutter
/Shaking
Gobo
Color
Gobo
Rotation
Dimmer
IR-4C
Shutter
/Shaking
Gobo
Color
No
Function
Dimmer
IS-6S
Pan
Tilt
Shutter
/Shaking
Gobo
Color
Reflector
IS-6B
Pan
Barrel
Rotation
Shutter
/Shaking
Gobo
Color
Reflector
IS-4
Shutter
/Shaking
Gobo
Color
Reflector
IS-3
Shutter
/Shaking
Gobo
/Color
No
Function
Reflector
4.1 Control Panel
Display
To show the various menu and the selected functions.
LED
9F
DMX
MASTER
SLAVE
SOUND
On
On
On
Flashing
DMX input present
Master Mode
Slave Mode
Sound activation
MENU
DOWN
UP
ENTER
to select the programming functions
to go backward in the selected functions
to go forward in the selected functions
to confirm the selected functions
Button
Remote controller input
By connect to the 1/4” microphone jack to control the unit for Stand by, Function and Mode.
Sensitivity
To adjust the sound sensitivity.
Microphone
To receives audio signal for sound activation.
DMX input/output
For DMX512 link, use 3-pin XLR plug cable to link the unit together.
4.2 Main Function
5.3.1 iSolution Operation
♦
To select any of the given functions, press the MENU button up to when the required one is
Consistent DMX configuration enable iRock and iShow to be linked together and
controlled at the same time.
showing on the display. Select the function by ENTER button and the display will blink. Use
♦
DOWN and UP button to change the mode. Once the required mode has been selected,
DMX address can be set remotely by iLead controller ( please refer to the user manual
of iLead controller ). No need to calculate the DMX channels of each fixture in the chain.
press the ENTER button to setup or it will automatically return to the main functions without
♦
any change after idling 8 seconds. To go back to the functions without any change press the
Automatic switching between DMX function and built-in stand alone programs.
MENU button. The main functions are showing below:
5.3.2 DMX Controller
An universal DMX controller to control the units, you have to set DMX address from 1 to 512
DMX512 Address Setting
Slave mode " Normal "
Slave mode " 2 Light Show "
Slave mode " 3 Light Show "
Slave mode " 4 Light Show "
Blackout Mode " Yes Blackout "
Blackout Mode " No Blackout "
Normal Color
Split Color
Pan Normal
Pan Inversion
Tilt / Barrel Normal
Tilt / Barrel Inversion
Dimmer Normal
Dimmer Inversion
MENU
LED on
LED off
Display Normal
Display Inversion
Focus Adjust
channel so that the units can receive DMX signal.
Press the MENU button up to when the
is showing on the display. Pressing ENTER
button and the display will blink. Use DOWN and UP button to change the DMX512 address.
Once the address has been selected, press and keep ENTER button pressed up to when the
display stops blinking or storing automatically 8 seconds later. To go back to the functions
without any change press the MENU button again.
Please refer to the following diagram to address your DMX512 channel for the first 4 units.
DMX address can be set remotely by IL-0824 controller. No need to calculate the DMX
10F
channels of each fixture in the chain.
( Following DMX address setting is based on that all the lighting fixtures are linked together
controlled by the 8-channel iLead IL-0824 controller. )
IR-7S/IR-7B/IR-6S/IR-6B/IR-6SD/IR-6BD/IR-5S/IR-5B/IS-6S/IS-6B:
Self-Test
Fixture Hours
IR-5C/IR-4C/IS-4/IS-3:
Reset
and
only for color-change
DMX512 Address Setting
Press the MENU button up to when the
is showing on the display. Pressing ENTER
button and the display will blink. Use DOWN and UP button to change the DMX512 address.
Once the address has been selected, press the ENTER button to setup or automatically
return to the main functions without any change after 8 seconds. To go back to the functions
without any change press the MENU button again.
Slave Mode
5.2 Easy Controller
Press the MENU button up to when the
is showing on the display. Pressing ENTER
button and the display will blink. Use DOWN and UP button to select the
The easy remote control is used only in master/slave mode. By
(normal) or
connecting to the 1/4” microphone jack of the first unit, you will find
(2 light show) mode or
(3 light show) mode or
(4 light show). Once
the mode has been selected, press the ENTER button to setup or automatically return to the
that the remote control on the first unit will control all the other units
main functions without any change after 8 seconds. To go back to the functions without any
as below.
change press the MENU button again.
Blackout Mode
Built-in lighting shows triggered by Easy Controller:
Press the MENU button up to when the
is showing on the display. Pressing ENTER
button and the display will blink. Use DOWN and UP button to select the
IR-7S
Stand by
IR-7B
IR-6SD Function
IR-6BD
IR-6S
IR-6B
IR-5S
Mode
IR-5B
IR-5C
IR-4C
IS-6S
IS-6B
IS-4
Blackout the unit
Strobe
X/Y moving pattern selection
1.Gobo/Color sync. strobe ( 12 patterns )
2.Sync. strobe
3.Two-light strobe
Color/Gobo selection
1. Hold on for gobo change.
2. Press shortly for color
change.
X/Y moving setting
1.Pan position
2.Tilt position
3.Dimmer
Sound 1
(LED off )
Slow/Sound 3
(LED on)
Position/ Latch
(LED fast blinking )
Function Strobe
Chase pattern selection
1.Gobo/Color sync. strobe ( 6 patterns )
2.Sync. strobe
3.Two-light strobe
Color/Gobo selection
1. Hold on for gobo change.
2. Press shortly for color
change.
Dimmer setting
Mode
Slow
(LED on)
Latch
(LED fast blinking )
X/Y moving pattern selection
Function Strobe
1.Gobo/Color sync. strobe ( 12 patterns )
2.Sync. strobe
3.Two-light strobe
Color/Gobo selection
1. Hold on for gobo change.
2. Press shortly for color
change.
X/Y moving setting
1.Pan position
2.Tilt position
Mode
Slow/Sound 3
(LED on)
Position/ Latch
(LED fast blinking )
Sound 2
(LED normal blinking)
Sound 2
(LED normal blinking)
8 seconds. To go back to the functions without any change press the MENU button again.
Color Mode
Sound 1
(LED off )
Sound 2
(LED normal blinking)
Stand by Blackout the unit
Mode
Sound
(LED off )
Slow
(LED on)
Stand by Blackout the unit
Function Strobe
Gobo/Color selection
1.Gobo/Color sync. strobe
2.Sync. strobe
3.Two-light strobe
Mode
Sound
(LED off )
Slow
(LED on)
Press the MENU button up to when the
(normal) or
(split color) mode. Once the mode has been selected, press the ENTER button to
setup or automatically return to the main functions without any change after 8 seconds. To go
back to the functions without any change press the MENU button again.
Pan Inversion
Press the MENU button up to when the
is showing on the display. Pressing ENTER
button and the display will blink. Use DOWN and UP button to select the
(normal) or
(pan inversion) mode. Once the mode has been selected, press the ENTER button to
setup or automatically return to the main functions without any change after 8 seconds. To go
back to the functions without any change press the MENU button again.
Tilt Inversion
Barrel Rotation Inversion
Press the MENU button up to when the
(
) is showing on the display.
Pressing ENTER button and the display will blink. Use DOWN and UP button to select the
(normal) or
(tilt/barrel rotation inversion) mode. Once the mode has been
selected, press the ENTER button to setup or automatically return to the main functions
without any change after 8 seconds. To go back to the functions without any change press the
MENU button again.
X/Y moving pattern
is showing on the display. Pressing ENTER
button and the display will blink. Use DOWN and UP button to select the
11F
Stand by Blackout the unit
Function Strobe
Gobo/Color selection
1.Gobo/Color sync. strobe 1.Hold on for gobo change.
2.Sync. strobe
2.Press shortly for color change.
3.Two-light strobe
IS-3
blackout) or
(no blackout) mode. Once the mode has been selected, press the
ENTER button to setup or automatically return to the main functions without any change after
Stand by Blackout the unit
Sound 1
(LED off )
(yes
Fixture Hours
Dimmer Inversion
Press the MENU button up to when the
is blinking on the display. Pressing ENTER
Press the MENU button up to when the
button and the display will show the number of working hours of the unit. To go back to the
is shown on the display. Pressing
ENTER button and the display will blink. Use DOWN and UP button to select the
(normal) or
functions press the MENU button again.
(dimmer inversion) mode. Once the mode has been selected, press
the ENTER button to setup or automatically return to the main functions without any
Reset
change after 8 seconds. To go back to the functions without any change press the MENU
Press the MENU button up to when the
is blinking on the display. Pressing ENTER
button and all channels of the unit will return to their standard position. To go back to the
button again.
functions press the MENU button again.
Led Display
Press the MENU button up to when the
5. How To Control The Unit
is showing on the display. Pressing ENTER
button and the display will blink. Use DOWN and UP button to select the
You can operate the unit in three ways:
(Led on) or
1. By master/slave built-in preprogram function
(Led off) mode. Once the mode has been selected, press the ENTER button to setup
or automatically return to the main functions without any change after 8 seconds. To go back
2. By easy controller
3. By IL-0824 ( please refer to the user guide of iLead controller ) or universal DMX
to the functions without any change press the MENU button again.
controller
Display Inversion
12F
It is good for you to install the unit on the floor or under ceiling. Press the MENU button up to
when the
is blinking on the display. Use the ENTER button to change to the mode
(display inversion), It will automatically store after 8 seconds. Or press the ENTER
button again return to the mode
the MENU button again.
(display normal). To go back to the functions press
Display normal mode for the fixture putting on the floor.
Display inversion mode for the fixture fixing under ceiling.
Focus Adjust
Press the MENU button up to when the
is blinking on the display. Pressing ENTER
button, the unit will focus on center position. To go back to the functions press the MENU
button again.
No need to turn the unit off when you change the DMX address, as new DMX address setting
will be effected at once. Every time you turn the unit on, it will show its item number on the
display and move all the motors to their ‘home’ position and you may hear some noises for
about 20 seconds. After that the unit will be ready to receive DMX signal or run the built in
programs.
5.1 Master/Slave Built In Preprogrammed Function
By linking the units in master/slave connection, the first unit will control the other units to give
an automatic, sound activated, synchronized light show. This function is good when you want
an instant show. Its DMX input jack will have nothing plugged into it, and Its master LED will
be constantly on and sound LED will flash to the music. The other units will have to set in
slave mode
and select
(normal) or
(2 light show) mode
(3
light show) mode or
(4 light show), Their DMX cables plugged into the DMX input
jacks (daisy chain) and the slave led lights will constantly on.
Self-Test
Press the MENU button up to when the
is blinking on the display. Pressing ENTER
button and the unit will run self-test by built in program. To go back to the functions press the
MENU button again.
and
only for color-change.
2-light show
In
(slave mode),
means the unit works normally and
means 2-light
show. In order to create a great light show, you can set
on the second unit to get
contrast movement to each other, even if you have two units only.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement