7. Controls
Zoom and Focus Adjustments can be made on the back panel of the camera. Loosen the screw adjusters before manually adjusting the zoom and focus to your required settings.
To ensure the camera remains weatherproof be sure to tighten the
screws after any adjustments are made. Leaving the screw adjusters untightened, resulting in any water damage to the camera, will void the product warranty.
Specifications
Model:
Picture Type:
XV549
Day/Night
(B/W & Colour)
Sony 1/3” Super HAD CCD Image Sensor:
DSP:
Resolution:
Lens Viewing Angle:
Infra Red Nightvision:
Xvision IXC1DN
500/550 TVL
30° to 64°
40 metres
Minimum Illumination: 0 Lux (IR On), 0.1 Lux (IR Off)
Audio: No
Operating Voltage: 12V DC 490mA
Suggested Power Supply: 12V DC 1250mA Regulated
Mounting:
Weatherproofing:
Dimensions (WxHxD):
Wall (Cable managed bracket supplied)
Yes
95x85x150mm (camera only)
CCTV
TECHNICAL SUPPORT:
For Technical Support for any Xvision product please contact your local distributor.
LIMITED WARRANTY:
This product is supplied with a 2 Year warranty. The Warranty excludes products that have been misused, (including accidental damage) and damage caused by normal wear and tear. In the unlikely event that you encounter a problem with this product, it should be returned to the place of purchase.
Manufactured exclusively for Xvision - www.x-vision.co.uk
UK/Europe
Xvision Group (UK)
Unit 2, Valley Point,
Beddington Farm Road,
Croydon
Surrey. CR0 4WP
Email: [email protected]
Far East
Kyoung Am Building
157-27 Samsung-dong
Kangnam-ku
135 090 Seoul
Korea
Email: [email protected]
Middle East
Burjuman Tower,
18th Floor
PO Box 121828
Dubai 43659
United Arab Emirates
Email: [email protected]
North America
100 Park Avenue
New York City,
New York
10017
United States
Email: [email protected]
CCTV
Model:
XV549
Colour 40m Long Range
IR Nightvision Camera
Before you begin
•
Please unpack the box carefully and identify that all the parts are present.
The camera is suitable for indoor or outdoor use. Please bear in mind the following points when choosing a mounting position.
•
The camera must be positioned so that it will not point directly into the sun (sunrise and sunset) or any bright light, as this may cause damage to the camera.
•
Avoid viewing areas where half the area is in bright sunlight and the other half is dark, such as in the shadow of a building. All types of cameras have difficulty in ‘seeing’ with such a large lux level variation.
•
Do not cut the camera cables, this will void the warranty.
•
Make sure you use only the recommended power supply. Damage caused to the camera by incorrect voltage or wiring is not covered by the warranty.
Model:
XV549
Colour Long Range Varifocal IR
Camera with 40 metres Nightvision
Thank you for purchasing this Xvision camera. Before operating this product, please read this instruction manual carefully.
1. Safety Precautions
When in use please avoid direct contact with eyes and do not touch the camera body as it can get very hot.
When installing the camera, please avoid pointing it directly at paper or flammable materials.
Please avoid all direct contact with the tempered glass cover to avoid contamination. If you need to clean the cover use cotton wool balls dipped in alcohol or glass wipes.
2. Product Description
The XV549 Colour Long Range IR camera is designed for high risk applications. It offers very high resolution 500/550 TVL images from its
Sony 1/3" Super HAD CCD sensor and will provide images in complete darkness up to 40 metres and beyond 40 metres in light levels above
0.1 lux. It features a Varifocal IR Optimised Aspherical Lens and Cable
Managed bracket and is designed for internal or external use and can be wall mounted.
3. Features
Sony 1/3” Super HAD CCD image sensor for 500/550 TVL resolution images and 0.1 lux low light sensitivity
Varifocal 4.0 to 9.0mm lens with 30° to 64° viewing angle for super sharp images and easy selection of the optimum viewing angle during installation.
Integrated Long Life Infra Red LEDs turn on automatically when the camera switches to B/W mode and provide up to 40 metres
Night Vision.
4. Contents
Hex Wrench
XV549 Camera 4x Fixing Screws
4x Wall Plugs
5. Product Parts
When attaching the bracket to the camera be careful not to damage the cable.
6. Installation
1. Make a hole in the wall approximately 30mm wide x 40mm deep.
2. Drill 4 holes and insert the wall plugs.
3. Feed the cables into the wall before fixing the camera using the
4 fixing screws
4. Connect the video cable and power supply to the camera after the camera has been mounted. Complete installation by manually adjusting the controls at the rear of the camera. (See section 7. Controls)
Fixing Holes Guide - Not shown actual size
28mm
20mm