Документация sc0811pro_eng_man

Документация sc0811pro_eng_man
Instruction Manual
Time switch
GB
Connection diagram
1. Safety instructions
2. Initial operation
!
The installation and assembly of electrical equipment must be only
carried out only by a skilled Person! Otherwise fire danger or danger of
an electric shock exists!
!
Connect the supply voltage/frequency as stated on the product label!
!
Warranty void if housing opened by unauthorised person!
!
The electronic circuit is protected against a wide range of external
influences. Incorrect operating may occur if external influences exceed
certain limits!
3. Menu overview
ƒ The time switch is delivered in sleep-mode, the display is switched off.
ƒ Press -button for 1 second.
current date and time is already programmed and European daylight
ƒ The
savings time is activated.
Select
language by pressing
-buttons and confirm it by
ƒ pressingthe desired
. (Remark: By pressing you move one step backwards from the
current position)
required, date, time and daylight savings time mode can be adjusted also by
ƒ Ifpressing
-buttons and a subsequent confirmation with .
4. Symbol legend
Channel is switched ON
Channel is switched OFF
For the current date the “holiday program” / “permanent by date” is activated
Standard programming step
Current state is based on a manual over-ride. The state will be cancelled with the next programming step.
Current state is based on a manual over-ride. The state is permanent until terminated manually (7).
I
Days of the week Monday, Tuesday, ... Sunday;
The underscores indicate if the program is active for the days above.
Current state is based on a switching time with pulse function
The time switch is locked; to unlock the device the PIN has to be entered (12).
5. Key function
6. Handling advice
1. To access the Enter-mode (program, adjustments, options) from the automatic-mode.
2. To revert to the beginning of the current (sub-) menu.
1. To adjust the flashing digit.
2. To scroll through a choice
1. Automatic-mode: To switch the channel ON or OFF until the next programming step occurs.
2. Automatic-mode: A push longer than 3 sec. = Permanent switching status (7).
1. To activate the time switch when operated without power supply.
2. To confirm the selection or the entered data.
time switch is programmable without external power supply after
ƒ The
pressing the -button.
ƒ To revert one step or one level back while in the Enter-Mode press .
completion of a (sub-) menu confirming end will return the device
ƒ After
into the automatic-mode.
the choice changes from end to continue. By confirming
ƒ With
continue the time switch returns to the beginning of the current
ƒ
(sub-) menu.
When confirming end before completion, the time switch returns to the
automatic-mode without saving the entered data.
8. New Program (See also the example (9))
Step A. to C. please refer to point 9. (Example “New Program”)
7. Channel ON OFF / Permanent P
Channel ON OFF
By pushing -button a manual switch of the channels take place.
The resulting switching status is marked with the hand-symbol and
remains until the next programming step occurs. (temporary override)
Permanent switching status P
By pressing the corresponding channel button for more than 3
sec. the channel is permanently switched ON or OFF. The status
remains until the next manual switching occurs (> 3 sec.).
(permanent over-ride)
9. Example „New Program“ (For a regular switching time)
A. If power supply is disconnected press
B. Press
for one second. The display appears in Automatic-Mode.
, the time switch is now in the Enter-Mode.
C. Confirm Program with
.
D. Confirm new program with
.
E. Choose the desired channel with
and confirm with
.
F. For regular switching times choose on or off with
-buttons and confirm with .
G. Within this level you activate the days of the week (1…7) on which the switching time should happen. With
you activate “yes” or deactivate “no” the corresponding date. Confirm each day with .
H. Adjustment of the time: Hours
and . Minutes
and .
I. Verify the entered switching time: If the flashing summary of the programming step is correct, verify on or
off with . After verification you have the choice between edit/delete and end with
.
J. If you want to proceed with programming, confirm next switching with
To leave the programming menu confirm end.
10. Pulse
.
11. Program permanent
Program -> New program -> Channel A -> …
Program -> new program -> channel A -> permanent -> …
The pulse function provides you the opportunity of programming a switching time with a defined duration.
As soon as the pulse-duration has expired the time switch switches OFF automatically (the duration of the pulse is up to 59:59 mm:ss).
The programming is carried out like a standard switching time (see point 8 / 9) with following differences
Choose Pulse function (9F).
Define the duration of the pulse ( pulstime minute / pulstime second).
Program the days of the week
Program the switching time (time hour / time minute)
Validation: Confirm the blinking summary of the pulse program
permanent by date programming step (holiday function) for each channel is possible. During the
ƒ One
desired period (The function is valid for the whole days) the channel can be switched off ( permanent
ƒ
ƒ
ƒ
ƒ
off) or on (permanent on).
ƒ The programming of this function is as described in (8 / 9).
choice permanent will not be offered anymore within the menu new program when already in use.
ƒ The
The switching time can be modified and deleted within Program modify and Program delete
respectively.
12. Additional adjustments
Menu
Main menu
Program query
Program
Program copy
Program
Program delete
Program
Program modify
Program
Date-Time
Summertime
Language
Adjustment
Adjustment
Adjustment
Factory Defaults
Adjustment
Counter
PIN-Code
Reset-Function
Application
To query the programming steps and remaining memory locations
Copy from one channel to another. Memory of the channel won’t
be overwritten; the copied switching steps appear additionally.
! Permanent by date function is not copied!
Deletion of switching time(s). The program for all channels, single
channels and single programming steps within on channel can be
deleted.
Within Program modify each single switching time can be
modified.
Adjustment of date and time
Adjustment of the daylight saving time mode (ON/OFF)
Choice of languages
Reset to the state of delivery.
! Date, time and switching program will be lost!
Displays the hour counter and pulse counter for each channel and
the time switch itself.
The time switch can be locked with a 4-digit PIN-Code. The code
can be adjusted, activated and deactivated. If you have forgotten
Options
the Code please call customer service.
Press all front keys for 2 seconds. The time switch is reset. The values for date
and time will be deleted and have to be re-entered. The switching program has
not been deleted!
Options
BA SC08pro_WEEK_N;DE,GB,FR,IT -22722- 2009.08-V02
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement