Rosemount 3051SAL Transmitter Datasheet

Rosemount 3051SAL Transmitter Datasheet
Product Data Sheet
January 2013
00813-0100-4801, Rev RA
Rosemount 3051S Series of Instrumentation
Scalable Pressure, Flow, and Level Solutions
Innovation Reaching Across Your Operation
With the Rosemount® 3051S Series of Instrumentation, you can optimize your operation in these critical
areas: production, quality, energy efficiency, and safety and environment. By leveraging the power of the
scalable Rosemount 3051S across your entire operation, you’ll be able to minimize process variability, gain
greater process insight, reduce maintenance and downtime, and meet regulatory demands. What’s more,
it’s easy for your people to use, ensuring you will realize the full potential of your measurement investment.
Rosemount 3051S Series
January 2013
Rosemount 3051S SuperModule Platform
The Most Advanced Pressure, Flow, and Level Measurements

The all-welded hermetic SST design delivers the industry's highest field reliability

Ultra performance provides up to ±0.025% accuracy and 200:1 rangedown

Ultra for Flow performance provides up to ±0.04% of reading and 14:1 flow turndown

10-year stability and 12-year limited warranty

SIL 2 certified to IEC 61508
Rosemount 3051S Series Selection Guide
Rosemount 3051S Coplanar Differential, Gage, or Absolute Transmitter
See ordering information on page 5.

Coplanar Platform enables integrated manifold, primary element, and seal system solutions

Dual-capacitance Saturn™ sensor technology corrects for overpressure and line pressure effects

Calibrated spans from 0.1 inH2O to 4000 psi (0,25 mbar to 276 bar)

Available with 316L SST, Alloy C-276, Alloy 400, Tantalum, gold-plated Alloy 400, or gold-plated
316L SST process isolators
Rosemount 3051S In-line Gage or Absolute Transmitter
See ordering information on page 13.

Direct threaded connection, manifold or seal system solutions

Piezoresistive sensor technology allows calibrated spans from
0.3 to 10000 psi (20,7 mbar to 689 bar)

Available with 316L SST or Alloy C-276 process isolators
Table of Contents
Rosemount 3051S Coplanar Pressure . . . . . . . . . . . . . . . . 5
Rosemount 3051S Level Transmitter . . . . . . . . . . . . . . . 62
Rosemount 3051S In-Line Pressure . . . . . . . . . . . . . . . . . 13
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Rosemount 3051S MultiVariable . . . . . . . . . . . . . . . . . . . 19
Product Certifications . . . . . . . . . . . . . . . . . . . . . . . . . . 100
Rosemount 3051SF DP Flowmeters . . . . . . . . . . . . . . . . 26
Dimensional Drawings . . . . . . . . . . . . . . . . . . . . . . . . . . 111
Rosemount 3051S Electronic Remote Sensors . . . . . . . . 50
2
www.rosemount.com
January 2013
Rosemount 3051S Series
Rosemount 3051S MultiVariable Transmitter
See ordering information on page 19.

Combines Differential Pressure, Static Pressure, and Process Temperature measurements along
with Mass and Energy Flow in a single device

Compensates for 25+ different variables providing accurate and repeatable flow readings

Customize pressure and temperature compensation for any flow application

Easily configure flow and device parameters with Engineering Assistant™ Software
Rosemount 3051SF DP Flowmeters
See ordering information on page 26.

Integrates the 3051S with Rosemount’s industry leading primary elements to create one
complete flowmeter assembly

Fully assembled, configured and leak tested for out-of-the-box installation

Reduce installed costs by replacing 10 parts traditionally used for a DP Flow installation with
one flowmeter

Reduce straight pipe requirements, lower permanent pressure loss, and achieve accurate
measurement in small line sizes
Rosemount 3051S Electronic Remote Sensor (ERS™) System
See ordering information on page 50.

The industry’s first digital DP Level architecture consists of a single 4-20 mA HART® loop with
two 3051S pressure sensors connected electronically

Unique digital architecture enables stable and repeatable DP Level measurements on tall
vessels, towers, and applications with wide-varying temperatures

Achieve increased process insight and diagnostics with MultiVariable measurements including
DP, Pressure, and Scaled Variable for Tank Level or Volume

Simplify installations and maintenance by eliminating wet or dry legs, heat tracing, and purge systems
Rosemount 3051S Level Transmitter
See ordering information on page 62.

Level transmitters combine world-class 3051S pressure transmitters with direct-mount seals,
all in a single integrated model number

Connect to virtually any process with a comprehensive offering of seal types, sizes, fill fluids,
and diaphragm materials

Combine with an 1199 Remote Mount Seal to form a Tuned-System™ Assembly for a cost
effective, easy-to-install DP Level measurement solution
www.rosemount.com
3
Rosemount 3051S Series
January 2013
Advanced Functionality
WirelessHART (IEC 62591) Capabilities
Available on Coplanar, In-Line, DP Flowmeters and Level Transmitters

Quickly deploy new pressure, level and flow measurements in 70% less time

Eliminate wiring design and construction complexities to lower costs by 40 - 60%

Extended range antenna capabilities provide access to remote locations

Delivering a decade of maintenance free performance with 10-year stability and power module
life
Advanced Diagnostic Capabilities
Available on Coplanar, In-Line, DP Flowmeters and Level Transmitters

Provides diagnostic coverage from the process to the transmitter to the host

Prevent on-scale failures by diagnosing electrical loop issues with Power Advisory diagnostics

Statistical Process Monitoring detects abnormal process conditions enabling more productive
and safer operations

Extend diagnostic coverage to Safety Instrumented Systems with IEC 61508 certified SIL 2
rating
Remote Display and Interface
Available on Coplanar, In-Line, DP Flowmeters, Electronic Remote Sensors, and Level
Transmitters

Direct mount to the process and access transmitter capabilities and diagnostics at grade

Get access up to 100 feet (30 m) away from the process to ensure personnel safety

Eliminate the need for impulse lines for best practice installations
Rosemount Instrument Manifolds
Available on Traditional, Coplanar, and In-Line Transmitters

Designed and engineered to provide optimal performance with Rosemount 3051S transmitters

Reduce cost and leak points with flangeless Coplanar design

Fully integrated manifold and transmitter assemblies come fully leak checked, calibrated and
assembled allowing for one purchase order to save time and cost

Rosemount manifolds provide a wide variety of styles, materials, and configurations to fit any
process
4
www.rosemount.com
January 2013
Rosemount 3051S Series
Rosemount 3051S Coplanar Pressure Transmitter
Rosemount 3051S Coplanar Pressure Transmitters are the industry leader for
Differential, Gage, and Absolute pressure measurement. The Coplanar Platform allows
seamless integration with manifolds, primary elements, and seal solutions. Capabilities
include:
3051S Coplanar Pressure
Transmitter

Ultra, Ultra for Flow, and Classic Performance

4-20 mA HART, Wireless, FOUNDATION™ fieldbus protocols

Safety Certification (Option Code QT)

Advanced Diagnostics (Option Code DA2)

Remote Display and Interface (Option Code M7, M8, or M9)
Additional Information
Specifications: page 79
Certifications: page 100
Dimensional Drawings: page 111
Table 1. Rosemount 3051S Scalable Coplanar Pressure Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Model
Transmitter Type
3051S
Scalable Pressure Transmitter
Performance Class(1)
Standard
1
Ultra: 0.025 percent span accuracy, 200:1 rangedown, 10-yr stability, 12-yr limited warranty
3(2)
2
Ultra for Flow: 0.04 percent reading accuracy, 200:1 turndown, 10-yr stability, 12-yr limited warranty
Classic: 0.035 percent span accuracy, 150:1 rangedown, 5-yr stability
Standard
★
★
★
Connection Type
Standard
C
Standard
★
Coplanar
Measurement Type(3)
Standard
D
G
Expanded
A
Standard
★
★
Differential
Gage
Absolute
Pressure Range
Standard
1A
2A
3A
4A
5A
Expanded
0A(4)
Differential
Gage
Absolute
-25 to 25 inH2O (-62,3 to 62,3 mbar)
-250 to 250 inH2O (-623 to
623 mbar)
-1000 to 1000 inH2O (-2,5 to 2,5 bar)
-300 to 300 psi (-20,7 to 20,7 bar)
-2000 to 2000 psi (-137,9 to 137,9
bar)
-25 to 25 inH2O (-62,3 to 62,3 mbar)
0 to 30 psia (0 to 2,06 bar)
-250 to 250 inH2O (-623 to 623 mbar)
0 to 150 psia (0 to 10,34 bar)
★
-393 to 1000 inH2O (-0,98 to 2,5 bar)
-14.2 to 300 psig (-0,98 to 20,7 bar)
0 to 800 psia (0 to 55,2 bar)
0 to 4000 psia (0 to 275,8 bar)
★
★
-14.2 to 2000 psig (-0,98 to 137,9 bar)
N/A
★
-3 to 3 inH2O (-7,47 to 7,47 mbar)
N/A
0 to 5 psia (0 to 0,34 bar)
www.rosemount.com
Standard
★
5
Rosemount 3051S Series
January 2013
Table 1. Rosemount 3051S Scalable Coplanar Pressure Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Isolating Diaphragm
Standard
2(5)
(5)
3
Expanded
4
(6)
5
6
7
Standard
316L SST
★
Alloy C-276
★
Alloy 400
Tantalum
Gold-Plated Alloy 400 (includes Graphite-Filled PTFE o-ring)
Gold-Plated 316L SST
Process Connection
Size
Materials of Construction
Flange Material
Drain Vent
Bolting
Standard
000
None
A11(7)
Assemble to Rosemount 305 Integral Manifold
★
A12(7)
Assemble to Rosemount 304 or AMF Manifold and SST traditional flange
★
A16(7)
Assemble to 304 or AMF Manifold to DIN SST Traditional Flange
★
B11(7)(8)(9)
Assemble to one Rosemount 1199 Seal
SST
★
B12(7)(8)(9)
Assemble to two Rosemount 1199 Seals
SST
★
C11(7)
Assemble to Rosemount 405C or 405P Primary Element
★
D11(7)
Assemble to Rosemount 1195 integral orifice and Rosemount 305 Integral Manifold
★
EA2(7)
Assemble to Rosemount 485 or 405A Annubar™ Primary
Element with Coplanar flange
SST
316 SST
★
EA3(7)
Assemble to Rosemount 485 or 405A Annubar Primary
Element with Coplanar flange
Cast C-276
Alloy C-276
★
EA5(7)
SST
Alloy C-276
★
E11
E12
Assemble to Rosemount 485 or 405A Annubar Primary
Element with Coplanar flange
1/4–18 NPT
Coplanar flange
1
Coplanar flange
/4–18 NPT
CS
SST
316 SST
316 SST
★
★
E13(5)
Coplanar flange
1/4–18 NPT
Cast C-276
Alloy C-276
★
E14
Coplanar flange
1/4–18 NPT
Cast Alloy 400
Alloy 400/K-500
★
E15(5)
Coplanar flange
1/4–18 NPT
SST
Alloy C-276
★
E16(5)
E21
E22
Coplanar flange
Coplanar flange
Coplanar flange
1/4–18 NPT
Alloy C-276
316 SST
316 SST
★
RC 1/4
RC 1/4
CS
CS
SST
E23(5)
Coplanar flange
RC 1/4
Cast C-276
Alloy C-276
★
E24
Coplanar flange
RC 1/4
Cast Alloy 400
Alloy 400/K-500
★
E25(5)
Coplanar flange
RC 1/4
SST
Alloy C-276
★
E26(5)
Coplanar flange
RC 1/4
CS
Alloy C-276
★
F12
Traditional flange
1/4–18 NPT
SST
316 SST
★
F13(5)
Traditional flange
1/4–18 NPT
Cast C-276
Alloy C-276
★
F14
Traditional flange
1
Cast Alloy 400
Alloy 400/K-500
★
F15(5)
Traditional flange
1
SST
Alloy C-276
★
F22
Traditional flange
RC 1/4
SST
316 SST
★
F23(5)
Traditional flange
RC 1/4
Cast C-276
Alloy C-276
★
★
F24
Standard
★
/4–18 NPT
/4–18 NPT
1
Traditional flange
RC /4
Cast Alloy 400
Alloy 400/K-500
Traditional flange
RC 1/4
SST
Alloy C-276
F52
DIN-compliant traditional flange
1
SST
316 SST
G11
Vertical mount level flange
2-in. ANSI class 150
SST
316 SST
F25(5)
6
/4–18 NPT
★
★
★
7
/16-in.
bolting
★
★
www.rosemount.com
January 2013
Rosemount 3051S Series
Table 1. Rosemount 3051S Scalable Coplanar Pressure Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
G12
G21
G22
G31
G41
Expanded
F32
F42
F62
F72
Vertical mount level flange
Vertical mount level flange
Vertical mount level flange
Vertical mount level flange
Vertical mount level flange
2-in. ANSI class 300
3-in. ANSI class 150
3-in. ANSI class 300
DIN- DN 50 PN 40
DIN- DN 80 PN 40
SST
SST
SST
SST
SST
316 SST
316 SST
316 SST
316 SST
316 SST
Bottom vent traditional flange
Bottom vent traditional flange
DIN-compliant traditional flange
DIN-compliant traditional flange
1
SST
SST
SST
SST
316 SST
316 SST
316 SST
316 SST
/4–18 NPT
RC 1/4
1
/4–18 NPT
1
/4–18 NPT
★
★
★
★
★
M10 bolting
M12 bolting
Transmitter Output
Standard
A
4–20 mA with digital signal based on HART® protocol
F(10)
FOUNDATION™ fieldbus protocol
(11)
X
Standard
★
★
★
Wireless (Requires wireless options and wireless PlantWeb housing)
Housing Style
Material
Conduit Entry
Size
Standard
00
None (SuperModule spare part, order output code A)
Standard
★
1A
PlantWeb housing
Aluminum
1/2–14 NPT
★
1B
PlantWeb housing
Aluminum
M20 x 1.5
★
★
1J
PlantWeb housing
SST
1
1K
PlantWeb housing
SST
M20 x 1.5
★
5A(12)
Wireless PlantWeb housing
Aluminum
1/2–14 NPT
★
5J(12)
Wireless PlantWeb housing
SST
1
★
★
/2–14 NPT
/2–14 NPT
2A
Junction Box housing
Aluminum
1
2B
Junction Box housing
Aluminum
M20 x 1.5
★
2J
Junction Box housing
SST
1
/2–14 NPT
★
2E
Junction Box housing with output for remote display and interface
Aluminum
1/2–14 NPT
★
2F
Junction Box housing with output for remote display and interface
Aluminum
M20 x 1.5
★
Junction Box housing with output for remote display and interface
SST
1
★
7J
Expanded
Quick Connect (A size Mini, 4-pin male termination)
SST
1C
PlantWeb housing
Aluminum
G1/2
1L
PlantWeb housing
SST
G1/2
2C
Junction Box housing
Aluminum
G1/2
2G
Junction Box housing with output for remote display and interface
Aluminum
G1/2
2M
(13)
/2–14 NPT
/2–14 NPT
★
Wireless Options (Requires option code X and wireless PlantWeb housing)
Update Rate
Standard
WA
User Configurable Update Rate
Standard
★
Operating Frequency and Protocol
Standard
3
2.4 GHz DSSS, IEC 62591 (WirelessHART)
Standard
★
Omnidirectional Wireless Antenna
Standard
WK
WM
Expanded
WN
External Antenna
Extended Range, External Antenna
Standard
★
★
High-Gain, Remote Antenna
www.rosemount.com
7
Rosemount 3051S Series
January 2013
Table 1. Rosemount 3051S Scalable Coplanar Pressure Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
SmartPower™
Standard
1(14)
Standard
Adapter for Black Power Module (I.S. Power Module Sold Separately)
★
Other Options (Include with selected model number)
PlantWeb Control Functionality
Standard
A01(15)
Standard
FOUNDATION fieldbus Advanced Control Function Block Suite
★
PlantWeb Diagnostic Functionality
Standard
Standard
D01(15)
FOUNDATION fieldbus Diagnostics Suite
★
DA2(15)(16)
Advanced HART Diagnostics Suite
★
PlantWeb Enhanced Measurement Functionality
Standard
H01(15)(17)
Standard
FOUNDATION fieldbus Fully Compensated Mass Flow Block
★
Mounting Bracket(18)
Standard
B4
B1
B2
B3
B7
B8
B9
BA
BC
Coplanar flange bracket, all SST, 2-in. pipe and panel
Traditional flange bracket, CS, 2-in. pipe
Traditional flange bracket, CS, panel
Traditional flange flat bracket, CS, 2-in. pipe
Traditional flange bracket, B1 with SST bolts
Traditional flange bracket, B2 with SST bolts
Traditional flange bracket, B3 with SST bolts
Traditional flange bracket, B1, all SST
Traditional flange bracket, B3, all SST
Standard
★
★
★
★
★
★
★
★
★
Software Configuration
Standard
C1(19)
C2
Standard
Custom software configuration (Requires Configuration Data Sheet)
★
Custom flow configuration (Requires H01 and Configuration Data Sheet)
★
Gage Pressure Calibration
Standard
C3
Gage pressure calibration on Rosemount 3051S_CA4 only
Standard
★
Alarm Limit
Standard
Standard
C4(15)(19)
NAMUR alarm and saturation levels, high alarm
★
C5(15)(19)
NAMUR alarm and saturation levels, low alarm
★
C6(15)(19)
Custom alarm and saturation signal levels, high alarm (Requires C1 and Configuration Data Sheet)
★
C7(15)(19)
Custom alarm and saturation signal levels, low alarm (Requires C1 and Configuration Data Sheet)
★
C8(15)(19)
Low alarm (standard Rosemount alarm and saturation levels)
★
Hardware Adjustments
Standard
D1(15)(19)(20)
Standard
Hardware adjustments (zero, span, alarm, security)
★
Flange Adapter
Standard
Standard
D2(21)
Expanded
1
D9(21)
RC1/2 SST flange adapter
8
/2-14 NPT flange adapter
★
www.rosemount.com
January 2013
Rosemount 3051S Series
Table 1. Rosemount 3051S Scalable Coplanar Pressure Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Custody Transfer
Standard
D3(22)
Standard
Measurement Canada Accuracy Approval
★
Ground Screw
Standard
D4(23)
External ground screw assembly
Standard
★
Drain/Vent Valve
Standard
D5(21)
Standard
Delete transmitter drain/vent valves (install plugs)
★
Expanded
D7(21)
SST Coplanar flange without drain/vent ports
Conduit Plug
Standard
DO(24)
Standard
316 SST Conduit Plug
★
Product Certifications(25)
Standard
E1
I1
IA
N1
K1
ND
E4
ATEX Flameproof
ATEX Intrinsic Safety
ATEX FISCO Intrinsic Safety (FOUNDATION™ fieldbus protocol only)
ATEX Type n
ATEX Flameproof, Intrinsic Safety, Type n, Dust
ATEX Dust
TIIS Flameproof
Standard
★
★
★
★
★
★
★
I4(12)
E5
I5
IE
K5
TIIS Intrinsic Safety
★
FM Explosion-proof, Dust Ignition-proof
FM Intrinsically Safe, Division 2
FM FISCO Intrinsically Safe (FOUNDATION™ fieldbus protocol only)
FM Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2
★
★
★
★
E6(26)
I6
IF
CSA Explosion-proof, Dust Ignition-proof, Division 2
★
CSA Intrinsically Safe
CSA FISCO Intrinsically Safe (FOUNDATION™ fieldbus protocol only)
★
★
K6(26)
E7
I7
IG
N7
K7
E2
I2
IB
K2
E3
I3
N3
CSA Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2
★
IECEx Flameproof, Dust
IECEx Intrinsic Safety
IECEx FISCO Intrinsic Safety (FOUNDATION™ fieldbus protocol only)
IECEx Type n
IECEx Flameproof, Dust, Intrinsic Safety, Type n
INMETRO Flameproof
INMETRO Intrinsic Safety
INMETRO FISCO Intrinsic Safety
INMETRO Flameproof, Intrinsic Safety
China Flameproof
China Intrinsic Safety
China Type n
★
★
★
★
★
★
★
★
★
★
★
★
KA(26)
ATEX and CSA Flameproof, Intrinsically Safe, Division 2
★
KB(26)
FM and CSA Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2
★
KC
FM and ATEX Explosion-proof, Intrinsically Safe, Division 2
★
KD(26)
FM, CSA, and ATEX Explosion-proof, Intrinsically Safe
★
KG
FM, CSA, ATEX and IECEx FISCO Intrinsic Safety
★
Shipboard Approvals
Standard
SBS
American Bureau of Shipping
www.rosemount.com
Standard
★
9
Rosemount 3051S Series
January 2013
Table 1. Rosemount 3051S Scalable Coplanar Pressure Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Sensor Fill Fluid
Standard
L1(27)
Standard
Inert sensor fill fluid
★
O-ring
Standard
L2
Graphite-filled PTFE o-ring
Standard
★
Bolting Material
Standard
Standard
L4(21)
Austenitic 316 SST bolts
★
L5(21)
ASTM A 193, Grade B7M bolts
★
L6(21)
Alloy K-500 bolts
★
L7(21)(28)
ASTM A453, Class D, Grade 660 bolts
★
L8(21)
ASTM A193, Class 2, Grade B8M bolts
★
Display Type (29)
Standard
Standard
M5
PlantWeb LCD Display
★
M7(15)(30) (31)
Remote mount LCD display and interface, PlantWeb housing, no cable, SST bracket
★
M8(15)(30)
Remote mount LCD display and interface, PlantWeb housing, 50 ft. (15 m) cable, SST bracket
★
Remote mount LCD display and interface, PlantWeb housing, 100 ft. (31 m) cable, SST bracket
★
(15)(30)
M9
Pressure Testing
Expanded
P1(32)
Hydrostatic testing with certificate
Special Cleaning
Expanded
P2(21)
Cleaning for special services
P3(21)
Cleaning for less than 1PPM chlorine/fluorine
Maximum Static Line Pressure
Standard
P9
4500 psig (310 bar) static pressure limit (Rosemount 3051S_CD only)
Standard
★
P0(33)
6092 psig (420 bar) static pressure limit (Rosemount 3051S2CD only)
★
Calibration Certification
Standard
Q4
QP
Calibration certificate
Calibration certificate and tamper evident seal
Standard
★
★
Material Traceability Certification
Standard
Q8
Material traceability certification per EN 10204 3.1
Standard
★
Quality Certification for Safety
Standard
Standard
QS(15)(19)
Prior-use certificate of FMEDA Data
★
QT(34)
Safety-certified to IEC 61508 with certificate of FMEDA data
★
Transient Protection
Standard
T1(35) (36)
Standard
Transient terminal block
★
Drinking Water Approval
Standard
DW(37)
10
Standard
NSF Drinking Water Approval
★
www.rosemount.com
January 2013
Rosemount 3051S Series
Table 1. Rosemount 3051S Scalable Coplanar Pressure Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Surface Finish Certification
Standard
Q16
Surface finish certification for sanitary remote seals
Standard
★
Toolkit Total System Performance Reports
Standard
QZ
Remote Seal System Performance Calculation Report
Standard
★
Conduit Electrical Connector
Standard
Standard
GE(38)
M12, 4-pin, Male Connector (eurofast®)
★
GM(38)
A size Mini, 4-pin, Male Connector (minifast®)
★
NACE Certificate
Standard
Standard
Q15(39)
Certificate of Compliance to NACE MR0175/ISO 15156 for wetted materials
★
Q25(39)
Certificate of Compliance to NACE MR0103 for wetted materials
★
Typical Model Number:
3051S1CD 2A 2 E12 A 1A DA2 B4 M5
(1) For detailed specifications see “Specifications” on page 79.
(2) This option is only available with range codes 2A and 3A, 316L SST or Alloy C-276 isolating diaphragm and silicone fill fluid.
(3) Performance Class code 3 is available with Measurement Type code D only.
(4) 3051S_CD0 is only available with traditional flange, 316L SST diaphragm material, and Bolting option L4.
(5) Materials of Construction comply with metallurgical requirements highlighted within NACE MR0175/ISO 15156 for sour oil field production environments.
Environmental limits apply to certain materials. Consult latest standard for details. Selected materials also conform to NACE MR0103 for sour refining
environments. Order with Q15 or Q25 to receive a NACE certificate.
(6) Tantalum diaphragm material is only available for ranges 2A - 5A, differential and gage.
(7) “Assemble to” items are specified separately and require a completed model number. Process connection option codes B12, C11, D11, EA2, EA3, and EA5 are only
available on differential Measurement Type, code D.
(8) Consult an Emerson Process Management representative for performance specifications.
(9) Not available with Performance Class code 3.
(10) Requires PlantWeb housing.
(11) Only intrinsically safe approval codes apply.
(12) Only available with output code X.
(13) Available with output code A only. Available approvals are FM Intrinsically Safe, Division 2 (option code I5), CSA Intrinsically Safe (option code I6), ATEX Intrinsic
Safety (option code I1), or IECEx Intrinsic Safety (option code I7). Contact an Emerson Process Management representative for additional information.
(14) Long-Life Power Module must be shipped separately, order Power Module 701PBKKF.
(15) Not available with output code X.
(16) Requires PlantWeb housing and output code A. Includes Hardware Adjustments as standard.
(17) Requires Rosemount Engineering Assistant to configure.
(18) For process connection option code A11, the mounting bracket must be ordered as part of the manifold model number.
(19) Not available with output code F.
www.rosemount.com
11
Rosemount 3051S Series
January 2013
(20) Not available with housing style codes 00, 2E, 2F, 2G, 2M, 5A, 5J, or 7J.
(21) Not available with process connection option code A11.
(22) Requires PlantWeb housing and Hardware Adjustments option code D1. Limited availability depending on transmitter type and range. Contact an Emerson
Process Management representative for additional information.
(23) This assembly is included with certification options E1, N1, K1, ND, E4, E7, N7, K7, E2, E3, KA, KC, and KD
(24) Transmitter is shipped with 316 SST conduit plug (uninstalled) in place of standard carbon steel conduit plug.
(25) Valid when SuperModule Platform and housing have equivalent approvals.
(26) Not available with M20 or G ½ conduit entry size.
(27) Only available on differential and gage measurement types. Silicone fill fluid is standard.
(28) Bolts are not considered process wetted. In instances where NACE MR0175/ISO 15156 and NACE MR0103 conformance is required for bolting, L7 is the
recommended bolting option.
(29) Not available with Housing code 7J.
(30) Not available with output code F, option code DA2, or option code QT.
(31) See the 3051S Reference Manual (document number 00809-0100-4801) for cable requirements. Contact an Emerson Process Management representative for
additional information.
(32) P1 is not available with 3051S_CA0.
(33) Requires 316L SST, Alloy C-276, or Gold-plated 316L SST diaphragm material, assemble to Rosemount 305 integral manifold or DIN-compliant traditional flange
process connection, and bolting option L8. Limited to Pressure Range (Differential), ranges 2A – 5A.
(34) Not available with output code F or X. Not available with housing code 7J.
(35) Not available with Housing code 00, 5A, 5J, or 7J.
(36) The T1 option is not needed with FISCO Product Certifications; transient protection is included in the FISCO product certification codes IA, IE, IF, and IG.
(37) Requires 316L SST diaphragm material, glass-filled PTFE O-ring (standard), and Process Connection code E12 or F12.
(38) Not available with Housing code 00, 5A, 5J, or 7J. Available with Intrinsically Safe approvals only. For FM Intrinsically Safe, Division 2 (option code I5) or FM FISCO
Intrinsically Safe (option code IE), install in accordance with Rosemount drawing 03151-1009 suitable for use with all IS approvals (I1, I2, I3, I5, I6, I7, IA, IB, IE, IF, IG).
(39) NACE compliant wetted materials are identified by footnote (4).
12
www.rosemount.com
January 2013
Rosemount 3051S Series
Rosemount 3051S In-Line Pressure Transmitter
Rosemount 3051S In-line Pressure Transmitters are the industry leader for Gage and
Absolute pressure measurement. The in-line, compact design allows the transmitter to
be connected directly to a process for quick, easy and cost effective installation.
Capabilities include:
3051S In-Line Pressure
Transmitter

Ultra and Classic Performance

4-20 mA HART, Wireless, FOUNDATION fieldbus protocols

Safety Certification (Option Code QT)

Advanced Diagnostics (Option Code DA2)

Remote Display and Interface (Option Code M7, M8, or M9)
Additional Information
Specifications: page 79
Certifications: page 100
Dimensional Drawings: page 113
Table 2. Rosemount 3051S Scalable In-Line Pressure Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Model
Transmitter Type
3051S
Scalable Pressure Transmitter
Performance Class(1)
Standard
1
2
Ultra: 0.025 percent span accuracy, 200:1 rangedown, 10-yr stability, 12-yr limited warranty
Classic: 0.035 percent span accuracy, 150:1 rangedown, 5-yr stability
Standard
★
★
In-Line
Standard
★
Connection Type
Standard
T
Measurement Type
Standard
G
A
Standard
★
★
Gage
Absolute
Pressure Range
Standard
1A
2A
3A
4A
5A
Gage
Absolute
-14.7 to 30 psi (-1,0 to 2,1 bar)
-14.7 to 150 psi (-1,0 to 10,3 bar)
-14.7 to 800 psi (-1,0 to 55 bar)
-14.7 to 4000 psi (-1,0 to 276 bar)
-14.7 to 10000 psi (-1,0 to 689 bar)
0 to 30 psia (2,1 bar)
0 to 150 psia (10,3 bar)
0 to 800 psia (55 bar)
0 to 4000 psia (276 bar)
0 to 10000 psia (689 bar)
Standard
★
★
★
★
★
Isolating Diaphragm
Standard
Standard
2(2)
316L SST
★
3(2)
Alloy C-276
★
www.rosemount.com
13
Rosemount 3051S Series
January 2013
Table 2. Rosemount 3051S Scalable In-Line Pressure Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Process Connection
Standard
A11(3)
Standard
Assemble to Rosemount 306 Integral Manifold
★
B11
Assemble to one Rosemount 1199 Seal
★
E11
1
★
G11
Expanded
F11
G1/2 A DIN 16288 male (Range 1-4 only)
★
(3)(4)
/2–14 NPT female
Non-threaded instrument flange (I-flange) (Range 1-4 only)
Transmitter Output
Standard
A
4–20 mA with digital signal based on HART® protocol
F(5)
FOUNDATION™ fieldbus protocol
X(6)
Wireless (Requires wireless options and wireless PlantWeb housing)
Housing Style
Standard
00
1A
1B
1J
1K
5A(7)
5J(7)
2A
2B
2J
2E
2F
2M
7J(8)
Expanded
1C
1L
2C
2G
Standard
★
★
★
Material
None (SuperModule spare part, order output code A)
PlantWeb housing
PlantWeb housing
PlantWeb housing
PlantWeb housing
Wireless PlantWeb housing
Wireless PlantWeb housing
Junction Box housing
Junction Box housing
Junction Box housing
Junction Box housing with output for remote display and interface
Junction Box housing with output for remote display and interface
Junction Box housing with output for remote display and interface
Aluminum
Aluminum
SST
SST
Aluminum
SST
Aluminum
Aluminum
SST
Aluminum
Aluminum
SST
Quick Connect (A size Mini, 4-pin male termination)
SST
PlantWeb housing
PlantWeb housing
Junction Box housing
Junction Box housing with output for remote display and interface
Aluminum
SST
Aluminum
Aluminum
Conduit Entry Size
1/2–14 NPT
M20 x 1.5
1/2–14 NPT
M20 x 1.5
1/2–14 NPT
1/2–14 NPT
1
/2–14 NPT
M20 x 1.5
1
/2–14 NPT
1
/2–14 NPT
M20 x 1.5
1/2–14 NPT
Standard
★
★
★
★
★
★
★
★
★
★
★
★
★
★
G1/2
G1/2
G1/2
G1/2
Wireless Options (Requires option code X and wireless PlantWeb housing)
Update Rate
Standard
WA
User Configurable Update Rate
Standard
★
Operating Frequency and Protocol
Standard
3
2.4 GHz DSSS, IEC 62591 (WirelessHART)
Standard
★
Omnidirectional Wireless Antenna
Standard
WK
WM
Expanded
WN
External Antenna
Extended Range, External Antenna
Standard
★
★
High-Gain, Remote Antenna
SmartPower™
Standard
1(9)
14
Standard
Adapter for Black Power Module (I.S. Power Module Sold Separately)
★
www.rosemount.com
January 2013
Rosemount 3051S Series
Table 2. Rosemount 3051S Scalable In-Line Pressure Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Other Options (Include with selected model number)
PlantWeb Control Functionality
Standard
A01(10)
Standard
FOUNDATION fieldbus Advanced Control Function Block Suite
★
PlantWeb Diagnostic Functionality
Standard
Standard
D01(10)
FOUNDATION fieldbus Diagnostics Suite
★
DA2(10)(11)
Advanced HART Diagnostics Suite
★
Mounting Bracket
Standard
B4
Bracket, all SST, 2-in. pipe and panel
Standard
★
Software Configuration
Standard
C1(12)
Standard
Custom software configuration (Requires Configuration Data Sheet)
★
Alarm Limit
Standard
C4(10)(12)
Standard
NAMUR alarm and saturation levels, high alarm
★
C5
NAMUR alarm and saturation levels, low alarm
★
C6(10)(12)
Custom alarm and saturation signal levels, high alarm (Requires C1 and Configuration Data Sheet)
★
C7(10)(12)
Custom alarm and saturation signal levels, low alarm (Requires C1 and Configuration Data Sheet)
★
C8(10)(12)
Low alarm (standard Rosemount alarm and saturation levels)
★
(10)(12)
Hardware Adjustments
Standard
D1(10)(12)(13)
Standard
Hardware adjustments (zero, span, alarm, security)
★
Custody Transfer
Standard
D3(14)
Standard
Measurement Canada Accuracy Approval
★
Ground Screw
Standard
D4(15)
External ground screw assembly
Standard
★
Conduit Plug
Standard
DO(16)
Standard
316 SST Conduit Plug
★
Product Certifications(17)
Standard
E1
I1
IA
N1
K1
ND
E4
ATEX Flameproof
ATEX Intrinsic Safety
ATEX FISCO Intrinsic Safety (FOUNDATION™ fieldbus protocol only)
ATEX Type n
ATEX Flameproof, Intrinsic Safety, Type n, Dust
ATEX Dust
TIIS Flameproof
I4(7)
E5
I5
IE
K5
TIIS Intrinsic Safety
FM Explosion-proof, Dust Ignition-proof
FM Intrinsically Safe, Division 2
FM FISCO Intrinsically Safe (FOUNDATION™ fieldbus protocol only)
FM Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2
www.rosemount.com
Standard
★
★
★
★
★
★
★
★
★
★
★
★
15
Rosemount 3051S Series
January 2013
Table 2. Rosemount 3051S Scalable In-Line Pressure Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
E6(18)
I6
IF
CSA Explosion-proof, Dust Ignition-proof, Division 2
CSA Intrinsically Safe
CSA FISCO Intrinsically Safe (FOUNDATION™ fieldbus protocol only)
★
K6(18)
E7
I7
IG
N7
K7
E2
I2
IB
K2
E3
I3
N3
CSA Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2
IECEx Flameproof, Dust Ignition-proof
IECEx Intrinsic Safety
IECEx FISCO Intrinsic Safety (FOUNDATION™ fieldbus protocol only)
IECEx Type n
IECEx Flameproof, Dust Ignition-proof, Intrinsic Safety, Type n
INMETRO Flameproof
INMETRO Intrinsic Safety
INMETRO FISCO Intrinsic Safety
INMETRO Flameproof, Intrinsic Safety
China Flameproof
China Intrinsic Safety
China Type n
★
KA(18)
ATEX and CSA Flameproof, Intrinsically Safe, Division 2
★
KB(18)
FM and CSA Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2
★
KC
FM and ATEX Explosion-proof, Intrinsically Safe, Division 2
★
KD(18)
FM, CSA, and ATEX Explosion-proof, Intrinsically Safe
★
KG
FM, CSA, ATEX and IECEx FISCO Intrinsic Safety
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
Shipboard Approvals
Standard
SBS
American Bureau of Shipping
Standard
★
Sensor Fill Fluid
Standard
Standard
L1(19)
Inert sensor fill fluid
★
Display Type(20)
Standard
Standard
M5
PlantWeb LCD Display
★
M7(10)(21) (22)
Remote mount LCD display and interface, PlantWeb housing, no cable, SST bracket
★
M8(10)(23)
Remote mount LCD display and interface, PlantWeb housing, 50 ft. (15 m) cable, SST bracket
★
M9(10)(23)
Remote mount LCD display and interface, PlantWeb housing, 100 ft. (31 m) cable, SST bracket
★
Pressure Testing
Expanded
P1
Hydrostatic testing with certificate
Special Cleaning
Expanded
P2(23)
Cleaning for special services
P3(23)
Cleaning for less than 1PPM chlorine/fluorine
Calibration Certification
Standard
Q4
QP
Calibration certificate
Calibration certificate and tamper evident seal
Standard
★
★
Material Traceability Certification
Standard
Q8
Material traceability certification per EN 10204 3.1
Standard
★
Quality Certification for Safety
Standard
Standard
QS(10)(12)
Prior-use certificate of FMEDA Data
QT(24)
Safety-certified to IEC 61508 with certificate of FMEDA data
16
★
★
www.rosemount.com
January 2013
Rosemount 3051S Series
Table 2. Rosemount 3051S Scalable In-Line Pressure Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Transient Protection
Standard
T1(25)(26)
Transient terminal block
Standard
★
Drinking Water Approval
Standard
DW(27)
NSF Drinking Water Approval
Standard
★
Surface Finish Certification
Standard
Q16
Surface finish certification for sanitary remote seals
Standard
★
Toolkit Total System Performance Reports
Standard
QZ
Remote Seal System Performance Calculation Report
Standard
★
Conduit Electrical Connector
Standard
Standard
GE(28)
M12, 4-pin, Male Connector (eurofast®)
★
GM(28)
A size Mini, 4-pin, Male Connector (minifast®)
★
NACE Certificate
Standard
Standard
Q15(29)
Certificate of Compliance to NACE MR0175/ISO 15156 for wetted materials
★
Q25(29)
Certificate of Compliance to NACE MR0103 for wetted materials
★
Typical Model Number:
3051S1TG 2A 2 E11 A 1A DA2 B4 M5
(1) For detailed specifications see “Specifications” on page 79.
(2) Materials of Construction comply with metallurgical requirements highlighted within NACE MR0175/ISO 15156 for sour oil field production environments.
Environmental limits apply to certain materials. Consult latest standard for details. Selected materials also conform to NACE MR0103 for sour refining
environments. Order with Q15 or Q25 to receive a NACE certificate.
(3) “Assemble to” items are specified separately and require a completed model number.
(4) Consult an Emerson Process Management representative for performance specifications.
(5) Requires PlantWeb housing.
(6) Only intrinsically safe approval codes apply.
(7) Only available with output code X.
(8) Only available with output code A. Available approvals are FM Intrinsically Safe, Division 2 (option code I5), CSA Intrinsically Safe (option code I6), ATEX Intrinsic
Safety (option code I1), or IECEx Intrinsic Safety (option code I7). Contact an Emerson Process Management representative for additional information.
(9) Long-Life Power Module must be shipped separately, order Power Module 701PBKKF.
(10) Not available with output code X.
(11) Requires PlantWeb housing and output code A. Includes Hardware Adjustments as standard.
(12) Not available with output code F.
(13) Not available with housing style codes 00, 01, 2E, 2F, 2G, 2M, 5A, 5J, or 7J.
(14) Requires PlantWeb housing and Hardware Adjustments option code D1. Limited availability depending on transmitter type and range. Contact an Emerson
Process Management representative for additional information.
(15) This assembly is included with certification options E1, N1, K1, ND, E4, E7, N7, K7, E2, E3, KA, KC, and KD.
(16) Transmitter is shipped with 316 SST conduit plug (uninstalled) in place of standard carbon steel conduit plug.
www.rosemount.com
17
Rosemount 3051S Series
January 2013
(17) Valid when SuperModule Platform and housing have equivalent approvals.
(18) Not available with M20 or G ½ conduit entry size.
(19) Silicone fill fluid is standard.
(20) Not available with Housing code 7J.
(21) Not available with output code F, option code DA2, or option code QT.
(22) See the 3051S Reference Manual (document number 00809-0100-4801) for cable requirements. Contact an Emerson Process Management representative for
additional information.
(23) Not available with process connection option code A11.
(24) Not available with output code F or X. Not available with housing code 7J.
(25) Not available with Housing code 00, 5A, 5J, or 7J.
(26) The T1 option is not needed with FISCO Product Certifications; transient protection is included in the FISCO product certification codes IA, IB, IE, IF, and IG.
(27) Requires 316L SST diaphragm material and Process Connection code E11 or G11.
(28) Not available with Housing code 00, 5A, 5J, or 7J. Available with Intrinsically Safe approvals only. For FM Intrinsically Safe, Division 2 (option code I5) or FM FISCO
Intrinsically Safe (option code IE), install in accordance with Rosemount drawing 03151-1009 suitable for use with all IS approvals (I1, I2, I3, I5, I6, I7, IA, IB, IE, IF,
IG).
(29) NACE compliant wetted materials are identified by footnote (1).
18
www.rosemount.com
January 2013
Rosemount 3051S Series
Rosemount 3051S MultiVariable Transmitter
The Rosemount 3051S MultiVariable Transmitter delivers unprecedented performance
and capabilities by providing superior flow calculations including fully compensated
mass or volume, energy, and totalized flow. Specify the level of compensation that best
matches the application:

Gas, natural gas, and steam measurement: Utilize full compensation (differential
pressure, line pressure, and temperature measurement)

Saturated steam: Utilize differential and line pressure, or differential pressure and
temperature measurement

Liquids: Utilize differential pressure and temperature measurement

Liquids at stable temperatures: Utilize differential pressure measurement
3051S MultiVariable Transmitter
Additional Information
Specifications: page 79
Certifications: page 105
Dimensional Drawings: page 111
Table 3. Rosemount 3051S Scalable MultiVariable Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Model
Transmitter Type
3051SMV
Scalable MultiVariable Transmitter
Performance Class(1)
Standard
Standard
3051SMV MultiVariable SuperModule, Measurement Types 1 and 2
3(2)
Ultra for Flow: 0.04% reading DP accuracy, 200:1 rangedown,10-year stability, 12-year limited warranty
★
5
Classic MV: 0.04% span DP accuracy, 100:1 rangedown, 5-year stability
★
3051SMV Single Variable SuperModule, Measurement Types 3 and 4
1(3)
Ultra: 0.025% span DP accuracy, 200:1 rangedown, 10-year stability, 12-year limited warranty
★
2
Classic: 0.035% span DP accuracy, 150:1 rangedown, 5-year stability
★
3(2)
Ultra for Flow: 0.04% reading DP accuracy, 200:1 rangedown,10-year stability, 12-year limited warranty
★
MultiVariable Type
Standard
Standard
M
Measurement with Fully Compensated Mass and Energy Flow Calculations
★
P
Measurement of Process Variables Only (No Flow Calculations)
★
Measurement Type
Standard
Standard
1
Differential Pressure, Static Pressure, and Temperature
★
2
Differential Pressure and Static Pressure
★
3
Differential Pressure and Temperature
★
4
Differential Pressure
★
Differential Pressure Range
Standard
Standard
0(3)(4)
-3 to 3 inH2O (-7,47 to 7,47 mbar)
★
1
-25 to 25 inH2O (-62,3 to 62,3 mbar)
★
2
-250 to 250 inH2O (-623 to 623 mbar)
★
3
-1000 to 1000 inH2O (-2,5 to 2,5 bar)
★
4
-150 to 150 psi (-10,3 to 10,3 bar) for Measurement Types 1 & 2; -300 to 300 psi (-20,7 to 20,7 bar) for Types 3 & 4
★
5
-2000 to 2000 psi (-137,9 to 137,9 bar)
★
www.rosemount.com
19
Rosemount 3051S Series
January 2013
Table 3. Rosemount 3051S Scalable MultiVariable Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Static Pressure Type
Standard
Standard
N(5)
None
★
A
Absolute
★
G
Gage
★
Static Pressure Range
Absolute
Gage
Standard
N(5)
Standard
★
None
3
Range 3
0.5 to 800 psia (0,03 to 55,2 bar)
-14.2 to 800 psig
(-0,98 to 55,2 bar)
4(6)
Range 4
0.5 to 3626 psia (0,03 to 250 bar)
-14.2 to 3626 psig
(-0,98 to 250 bar)
★
★
Temperature Input
Standard
Standard
N(7)
None
★
R(8)
RTD Input (Type Pt 100, -328 to 1562 °F (-200 to 850 °C))
★
Isolating Diaphragm
Standard
Standard
2(9)
316L SST
★
3(9)
Alloy C-276
★
Expanded
5(10)
Tantalum
7
Gold-Plated 316L SST
Material Type
Process Connection
Size
Flange Material
Drain Vent
Standard
Bolting
Standard
000
None
★
A11(11)
Assemble to Rosemount 305/306 Integral Manifold
★
A12(11)
Assemble to Rosemount 304 or AMF Manifold with SST Traditional Flange
★
A16(11)
Assemble to 304 or AMF Manifold to DIN SST Traditional Flange
★
B11(11)(12)
Assemble to one Rosemount 1199 Seal
★
B12(11)(12)
Assemble to two Rosemount 1199 Seals
★
C11(11)
Assemble to Rosemount 405C or 405P Primary Element
★
D11(11)
Assemble to Rosemount 1195 Integral Orifice and Rosemount 305 Integral Manifold
★
(11)
EA2
Assemble to Rosemount 485 or 405A Annubar Primary
Element with Coplanar flange
SST
316 SST
★
EA3(11)
Assemble to Rosemount 485 or 405A Annubar Primary
Element with Coplanar flange
Cast C-276
Alloy C-276
★
EA5(11)
Assemble to Rosemount 485 or 405A Annubar Primary
Element with Coplanar flange
SST
Alloy C-276
★
E11
Coplanar flange
1
Carbon Steel
316 SST
★
E12
Coplanar flange
1
SST
316 SST
★
E13(9)
Coplanar flange
1
Cast C-276
Alloy C-276
★
E14
Coplanar flange
1
Cast Alloy 400
Alloy 400/K-500
★
20
/4–18 NPT
/4–18 NPT
/4–18 NPT
/4–18 NPT
www.rosemount.com
January 2013
Rosemount 3051S Series
Table 3. Rosemount 3051S Scalable MultiVariable Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Standard
Standard
E15(9)
Coplanar flange
1/4–18 NPT
SST
Alloy C-276
★
E16(9)
Coplanar flange
1/4–18 NPT
Carbon Steel
Alloy C-276
★
E21
Coplanar flange
RC 1/4
Carbon Steel
316 SST
★
E22
Coplanar flange
RC 1/4
SST
316 SST
★
E23(9)
Coplanar flange
RC 1/4
Cast C-276
Alloy C-276
★
E24
Coplanar flange
RC 1/4
Cast Alloy 400
Alloy 400/K-500
★
E25(9)
Coplanar flange
RC 1/4
SST
Alloy C-276
★
E26(9)
Coplanar flange
RC 1/4
Carbon Steel
Alloy C-276
★
F12
Traditional flange
1/4–18 NPT
SST
316 SST
★
F13(9)
Traditional flange
1/4–18 NPT
Cast C-276
Alloy C-276
★
F14
Traditional flange
1/4–18 NPT
Cast Alloy 400
Alloy 400/K-500
★
F15(9)
Traditional flange
1/4–18 NPT
SST
Alloy C-276
★
F22
Traditional flange
RC 1/4
SST
316 SST
★
F23(9)
Traditional flange
RC 1/4
Cast C-276
Alloy C-276
★
F24
Traditional flange
RC 1/4
Cast Alloy 400
Alloy 400/K-500
★
F25(9)
Traditional flange
RC 1/4
SST
Alloy C-276
F52
DIN-compliant traditional flange
1/4–18 NPT
SST
316 SST
G11
Vertical mount level flange
2-in. ANSI class 150
SST
★
G12
Vertical mount level flange
2-in. ANSI class 300
SST
★
G14(9)
Vertical mount level flange
2-in. ANSI class 150
Cast C-276
★
G15(9)
Vertical mount level flange
2-in. ANSI class 300
Cast C-276
★
G21
Vertical mount level flange
3-in. ANSI class 150
SST
★
G22
Vertical mount level flange
3-in. ANSI class 300
SST
★
G31
Vertical mount level flange
DIN- DN 50 PN 40
SST
★
★
7/16-in. bolting
★
Expanded
EB6
Assemble to Primary Element with Manifold and Coplanar Flange, CS, Alloy C-276
F32
Bottom vent traditional flange
1/4–18 NPT
SST
316 SST
F42
Bottom vent traditional flange
RC 1/4
SST
316 SST
F62
DIN-compliant traditional flange
1/4–18 NPT
SST
316 SST
M10 bolting
F72
DIN-compliant traditional flange
1/4–18 NPT
SST
316 SST
M12 bolting
G41
Vertical mount level flange
DIN- DN 80 PN 40
SST
Transmitter Output
Standard
A
Standard
★
4–20 mA with digital signal based on HART protocol
Housing Style
Material
Conduit Entry Size
Standard
Standard
1A
PlantWeb housing
Aluminum
1
★
1B
PlantWeb housing
Aluminum
M20 x 1.5
★
1J
PlantWeb housing
SST
1
★
1K
PlantWeb housing
SST
M20 x 1.5
★
1C
PlantWeb housing
Aluminum
G1/2
1L
PlantWeb housing
SST
G1/2
/2–14 NPT
/2–14 NPT
Expanded
Options (Include with selected model number)
RTD Cable (RTD Sensor must be ordered separately)
Standard
Standard
C12
RTD Input with 12 ft. (3.66 m) of Shielded Cable
★
C13
RTD Input with 24 ft. (7.32 m) of Shielded Cable
★
C14
RTD Input with 75 ft. (22.86 m) of Shielded Cable
★
www.rosemount.com
21
Rosemount 3051S Series
January 2013
Table 3. Rosemount 3051S Scalable MultiVariable Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Standard
Standard
C22
RTD Input with 12 ft. (3.66 m) of Armored Shielded Cable
★
C23
RTD Input with 24 ft. (7.32 m) of Armored Shielded Cable
★
C24
RTD Input with 75 ft. (22.86 m) of Armored Shielded Cable
★
C32
RTD Input with 12 ft. (3.66 m) of ATEX/IECEx Flameproof Cable
★
C33
RTD Input with 24 ft. (7.32 m) of ATEX/IECEx Flameproof Cable
★
C34
RTD Input with 75 ft. (22.86 m) of ATEX/IECEx Flameproof Cable
★
Mounting Brackets(13)
Standard
Standard
B4
Coplanar flange bracket, all SST, 2-in. pipe and panel
★
B1
Traditional flange bracket, Carbon Steel, 2-in. pipe
★
B2
Traditional flange bracket, Carbon Steel, panel
★
B3
Traditional flange flat bracket, Carbon Steel, 2-in. pipe
★
B7
Traditional flange bracket, B1 with SST bolts
★
B8
Traditional flange bracket, B2 with SST bolts
★
B9
Traditional flange bracket, B3 with SST bolts
★
BA
Traditional flange bracket, B1, all SST
★
BC
Traditional flange bracket, B3, all SST
★
Software Configuration
Standard
Standard
C1
Custom software configuration
Note: A Configuration Data Sheet must be completed, see document number 00806-0100-4803.
★
C2
Custom flow configuration
Note: A Custom Fluid Data Sheet must be completed, see document number 00806-0200-4803.
★
C4
NAMUR alarm and saturation levels, high alarm
★
C5
NAMUR alarm and saturation levels, low alarm
★
C6
Custom alarm and saturation signal levels, high alarm
★
C7
Custom alarm and saturation signal levels, low alarm
★
C8
Low alarm (standard Rosemount alarm and saturation levels)
★
Flange Adapter
Standard
D2(14)
Standard
1/2-14 NPT flange adapter
★
Expanded
D9(14)
RC 1/2 SST flange adapter
Ground Screw
Standard
D4(15)
Standard
External ground screw assembly
★
Drain/Vent Valve
Standard
D5(14)
Standard
Delete transmitter drain/vent valves (install plugs)
★
Expanded
D7(14)
Coplanar flange without drain/vent ports
Conduit Plug
Standard
DO(16)
22
Standard
316 SST Conduit Plug
★
www.rosemount.com
January 2013
Rosemount 3051S Series
Table 3. Rosemount 3051S Scalable MultiVariable Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Product Certifications
Standard
Standard
E1
ATEX Flameproof
★
I1
ATEX Intrinsic Safety
★
N1
ATEX Type n
★
ND
ATEX Dust
★
K1
ATEX Flameproof, Intrinsic Safety, Type n, Dust (combination of E1, I1, N1, and ND)
★
E4
TIIS Flameproof
★
E5
FM Explosion-proof, Dust Ignition-proof
★
I5
FM Intrinsically Safe, Division 2
★
K5
FM Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2 (combination of E5 and I5)
★
E6(17)
CSA Explosion-proof, Dust Ignition-proof, Division 2
★
I6
CSA Intrinsically Safe
★
K6(17)
CSA Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2 (combination of E6 and I6)
★
E7
IECEx Flameproof, Dust Ignition-proof
★
I7
IECEx Intrinsic Safety
★
N7
IECEx Type n
★
K7
IECEx Flameproof, Dust Ignition-proof, Intrinsic Safety, and Type n (combination of E7, I7, and N7)
★
E2
INMETRO Flameproof
★
I2
INMETRO Intrinsic Safety
★
E3
China Flameproof
★
I3
China Intrinsic Safety
★
KA(17)(18)
ATEX and CSA Explosion-proof, Intrinsically Safe, Division 2 (combination of E1, E6, I1, and I6)
★
KB(17)(18)
FM and CSA Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2 (combination of E5, E6, I5, and I6)
★
KC(18)
FM and ATEX Explosion-proof, Intrinsically Safe, Division 2 (combination of E5, E1, I5, and I1)
★
KD(17)(18)
FM, CSA, and ATEX Explosion-proof, Intrinsically Safe (combination of E5, E6, E1, I5, I6, and I1)
★
Drinking Water Approval
Standard
DW(19)
Standard
NSF Drinking Water Certification
★
Shipboard Approvals
Standard
SBS
Standard
American Bureau of Shipping
★
Alternate Materials of Construction
Standard
Standard
L1
Inert sensor fill fluid (Differential and Gage sensors only) Note: Silicone fill fluid is standard.
★
L2
Graphite-filled PTFE O-ring
★
L4(14)
Austenitic 316 SST bolts
★
L5(14)
ASTM A193, Grade B7M bolts
★
L6(14)
Alloy K-500 bolts
★
L7(14)(20)
ASTM A453, Class D, Grade 660 bolts
★
L8(14)
ASTM A193, Class 2, Grade B8M bolts
★
Digital Display
Standard
M5
Standard
PlantWeb LCD Display
★
Wireless Assembly Options
Standard
WTA
Standard
Integral assembly to Smart Wireless 775 THUM Adapter (Specified Separately)
★
Special Procedures
Standard
Standard
P1(21)
Hydrostatic testing with certificate
★
P9(3)
4500 psig (310 bar) static pressure limit
★
P0(3)(22)
6092 psig (420 bar) static pressure limit
★
www.rosemount.com
23
Rosemount 3051S Series
January 2013
Table 3. Rosemount 3051S Scalable MultiVariable Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Expanded
P2(14)
Cleaning for special services
P3(14)
Cleaning for less than 1PPM chlorine/fluorine
Special Certifications
Standard
Standard
Q4
Calibration Certificate
★
QP
Calibration Certificate and Tamper Evident Seal
★
Q8
Material Traceability Certification per EN 10204 3.1B
★
Q16
Surface Finish Certification for Sanitary Remote Seals
★
QZ
Remote Seal System Performance Calculation Report
★
Transient Protection
Standard
T1
Standard
★
Transient terminal block
Conduit Electrical Connector
Standard
Standard
GE(23)
M12, 4-pin, Male Connector (eurofast®)
★
GM(23)
A size Mini, 4-pin, Male Connector (minifast®)
★
NACE Certificate
Standard
Standard
Q15(24)
Certificate of Compliance to NACE MR0175/ISO 15156 for wetted materials
★
Q25(24)
Certificate of Compliance to NACE MR0103 for wetted materials
★
Cold Temperature
Standard
BRR
Standard
★
-58 °F (-50 °C) Cold Temperature Start-up
Typical Model Number:
3051SMV 3 M 1 2 G 4 R 2 E12 A 1A B4 C2 M5
(1) For detailed specifications see “Specifications” on page 79.
(2) For Measurement Types 1 & 2, only available with DP range codes 2, 3, and 4, 316L SST and Alloy C-276 isolating diaphragm and silicone fill fluid.
For Measurements Types 3 & 4, only available with DP range codes 2 and 3, 316L SST and Alloy C-276 isolating diaphragm and silicone fill fluid.
(3) Only available with Measurement Type codes 3 and 4.
(4) DP Range 0 is only available with traditional flange, 316L SST diaphragm material, and Bolting option L4.
(5) Required for Measurement Type codes 3 and 4.
(6) For Measurement Type codes 1 and 2 with DP range 1, absolute limits are 0.5 to 2000 psi (0,03 to 137,9 bar) and gage limits are -14.2 to 2000 psig
(-0,98 to 137,9 bar).
(7) Required for Measurement Type codes 2 and 4.
(8) Required for Measurement Type codes 1 and 3. RTD Sensor must be ordered separately.
(9) Materials of Construction comply with metallurgical requirements highlighted within NACE MR0175/ISO 15156 for sour oil field production environments
Environmental limits apply to certain materials. Consult latest standard for details. Selected materials also conform to NACE MR0103 for sour refining
environments. Order with Q15 or Q25 to receive a NACE certificate.
(10) Tantalum diaphragm material is only available for DP ranges 2-5.
(11) “Assemble to” items are specified separately and require a completed model number.
(12) Consult an Emerson Process Management representative for performance specifications.
(13) For process connection option code A11, the mounting bracket must be ordered as part of the manifold model number.
(14) Not available with process connection option code A11.
(15) This assembly is included with certification options E1, N1, K1, ND, E4, E7, N7, K7, E2, E3, KA, KC, and KD.
24
www.rosemount.com
January 2013
Rosemount 3051S Series
(16) Transmitter is shipped with 316 SST conduit plug (uninstalled) in place of standard carbon steel conduit plug.
(17) Not available with M20 or G ½ conduit entry size.
(18) RTD cable not available with this option.
(19) Requires 316L SST diaphragm material, glass-filled PTFE O-ring (standard), and Process Connection code E12 or F12.
(20) Bolts are not considered process wetted. In instances where NACE MR0175/ISO 15156 and NACE MR0103 conformance is required for bolting, L7 is the
recommended bolting option.
(21) Not available with DP range 0.
(22) Requires 316L SST or Alloy C-276 diaphragm material, assemble to Rosemount 305 Integral Manifold or DIN-compliant traditional flange process connection, and
bolting option L8. Limited to differential pressure ranges 2-5.
(23) Available with Intrinsically Safe approvals only. For FM Intrinsically Safe, Non-Incendive approval (option code I5), install in accordance with Rosemount drawing
03151-1009.
(24) NACE compliant wetted materials are identified by footnote (8).
www.rosemount.com
25
Rosemount 3051S Series
January 2013
Rosemount 3051SF DP Flowmeters
Rosemount 3051SF Flowmeters integrate the 3051S with industry leading primary
elements. Capabilities include:
3051SFC
3051SFA
3051SFP

Flowmeters are factory configured to meet your application needs (Configuration Data
Sheet required)

MultiVariable capabilities allow scalable flow compensation
(Measurement Types 1-7)

4-20 mA HART, Wireless, and FOUNDATION fieldbus protocols

Ultra for Flow for improved flow performance across wider flow ranges

Integral temperature measurement (Option Code T)

Advanced Diagnostics (Option Code DA2)

Direct or remote mount configurations available
Additional Information
Specifications: page 79
Dimensional Drawings: page 117
Rosemount 3051SFA Annubar Flowmeter

Annubar flowmeters reduce permanent pressure loss by creating less blockage in the pipe

Ideal for large line size installations when cost, size and weight of the flowmeter are concerns
Table 4. Rosemount 3051SFA Annubar Flowmeter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Model
3051SFA
Product Description
Measurement
• = Available
Type
— = Unavailable
D
1-7
•
•
Fully Compensated Mass & Energy Flow Calculations – Differential & Static Pressures w/ Temperature
Compensated Flow Calculations – Differential & Static Pressures
Compensated Flow Calculations – Differential Pressure & Temperature
Compensated Flow Calculations – Differential Pressure
Differential Pressure
—
—
—
—
•
•
•
•
•
—
Process Variables Only (No Flow Calculations) – Differential & Static Pressures w/ Temperature
Process Variables Only (No Flow Calculations) – Differential & Static Pressures
Process Variables Only (No Flow Calculations) – Differential Pressure & Temperature
—
—
—
•
•
•
Annubar Flowmeter
Measurement Type
Standard
1
2
3
4
D
Expanded
5
6
7
26
Standard
★
★
★
★
★
www.rosemount.com
January 2013
Rosemount 3051S Series
Table 4. Rosemount 3051SFA Annubar Flowmeter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Fluid Type
Standard
L
G
S
D
1-7
Liquid
Gas
Steam
•
•
•
•
•
•
Standard
★
★
★
2-in. (50 mm)
21/2-in. (63.5 mm)
3-in. (80 mm)
31/2-in. (89 mm)
4-in. (100 mm)
5-in. (125 mm)
6-in. (150 mm)
7-in. (175 mm)
8-in. (200 mm)
10-in. (250 mm)
12-in. (300 mm)
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Standard
★
★
★
★
★
★
★
★
★
★
★
14-in. (350 mm)
16-in. (400 mm)
18-in. (450 mm)
20-in. (500 mm)
24-in. (600 mm)
30-in. (750 mm)
36-in. (900 mm)
42-in. (1066 mm)
48-in. (1210 mm)
60-in. (1520 mm)
72-in. (1820 mm)
78-in. (1950 mm)
84-in. (2100 mm)
90-in. (2250 mm)
96-in. (2400 mm)
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Range C from the Pipe I.D. table
Range D from the Pipe I.D. table
•
•
•
•
Range A from the Pipe I.D. table
Range B from the Pipe I.D. table
Range E from the Pipe I.D. table
Non-standard Pipe I.D. Range or Line Sizes greater than 12-in. (300 mm)
•
•
•
•
•
•
•
•
Carbon steel (A105)
316 Stainless Steel
No Mounting (Customer Supplied)
•
•
•
•
•
•
Chrome-Moly Grade F-11
Chrome-Moly Grade F-22
Chrome-Moly Grade F-91
•
•
•
•
•
•
Line Size
Standard
020
025
030
035
040
050
060
070
080
100
120
Expanded
140
160
180
200
240
300
360
420
480
600
720
780
840
900
960
Pipe I.D. Range
Standard
C
D
Expanded
A
B
E
Z
Standard
★
★
Pipe Material / Mounting Assembly Material
Standard
C
S
0(1)
Expanded
G
N
J
www.rosemount.com
Standard
★
★
★
27
Rosemount 3051S Series
January 2013
Table 4. Rosemount 3051SFA Annubar Flowmeter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Piping Orientation
D
1-7
Standard
H
D
U
Horizontal Piping
Vertical Piping with Downwards Flow
Vertical Piping with Upwards Flow
•
•
•
•
•
•
Standard
★
★
★
Pak-Lok
Flanged with opposite side support
•
•
•
•
Standard
★
★
Flange-Lok
Gear-Drive Flo-Tap
Manual Flo-Tap
•
•
•
•
•
•
316 Stainless Steel
•
•
Alloy C-276
•
•
Sensor size 1 — Line sizes 2-in. (50 mm) to 8-in. (200 mm)
Sensor size 2 — Line sizes 6-in. (150 mm) to 96-in. (2400 mm)
Sensor size 3 — Line sizes greater than 12-in. (300 mm)
•
•
•
•
•
•
Standard
★
★
★
Compression/Threaded Connection
150# RF ANSI
300# RF ANSI
600# RF ANSI
DN PN16 Flange
DN PN40 Flange
DN PN100 Flange
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Standard
★
★
★
★
★
★
★
900# RF ANSI
1500# RF ANSI
2500 # RF ANSI
150# RTJ Flange
300# RTJ Flange
600# RTJ Flange
900# RTJ Flange
1500# RTJ Flange
2500# RTJ Flange
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Standard
★
•
•
•
•
★
★
Annubar Type
Standard
P
F
Expanded
L
G
M
Sensor Material
Standard
S
Expanded
H
Standard
★
Sensor Size
Standard
1
2
3
Mounting Type
Standard
T1
A1
A3
A6
D1
D3
D6
Expanded
A9(2)
AF(2)
AT(2)
R1
R3
R6
R9(2)
RF(2)
RT(2)
Opposite Side Support or Packing Gland
Standard
0
C
D
28
No opposite side support or packing gland (Required for Pak-Lok and Flange-Lok models)
Opposite Side Support – Required for Flanged Models
NPT Threaded Opposite Support Assembly – Extended Tip
Welded Opposite Support Assembly – Extended Tip
www.rosemount.com
January 2013
Rosemount 3051S Series
Table 4. Rosemount 3051SFA Annubar Flowmeter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
D
1-7
•
•
•
•
•
•
•
•
•
•
Not Applicable or Customer Supplied
•
•
Gate Valve, Carbon Steel
Gate Valve, Stainless Steel
Ball Valve, Carbon Steel
Ball Valve, Stainless Steel
•
•
•
•
•
•
•
•
Integral RTD – not available with Flanged model greater than class 600#
No Temperature Sensor
•
•
•
•
Remote Thermowell and RTD
•
•
Direct-mount, Integral 3-valve Manifold– not available with Flanged model greater than class 600
Direct -mount, 5-valve Manifold – not available with Flanged model greater than class 600
Remote-mount NPT Connections (1/2-in. FNPT)
•
•
•
•
•
•
Direct-mount, High Temperature 5-valve Manifold – not available with Flanged model greater than
class 600
Remote-mount SW Connections (1/2-in.)
•
•
•
•
•
•
•
•
•
•
Standard
★
★
★
•
—
—
—
—
•
•
•
•
•
Standard
★
★
★
★
★
•
•
•
•
—
—
Standard
★
★
★
Expanded
J(3)
K(3)
L(3)
N(3)
R
Packing Gland – Required for Flo-Tap Models
Packing Gland Material
Stainless Steel Packing Gland / Cage Nipple
Stainless Steel Packing Gland / Cage Nipple
Stainless Steel Packing Gland / Cage Nipple
Stainless Steel Packing Gland / Cage Nipple
Alloy C-276 Packing Gland / Cage Nipple
Rod Material
Carbon Steel
Stainless Steel
Carbon Steel
Stainless Steel
Stainless Steel
Packing Material
PTFE
PTFE
Graphite
Graphite
Graphite
Isolation Valve for Flo-Tap Models
Standard
0(1)
Expanded
1
2
5
6
Standard
★
Temperature Measurement
Standard
T(4)
0(5)
Expanded
R(4)
Standard
★
★
Transmitter Connection Platform
Standard
3
5
7
Expanded
6
8
Standard
★
★
★
Differential Pressure Range
Standard
1
2
3
0 to 25 in H2O (0 to 62.3 mbar)
0 to 250 in H2O (0 to 623 mbar)
0 to 1000 in H2O (0 to 2.5 bar)
Static Pressure Range
Standard
A(6)
D
E(7)
J
K(7)
None
Absolute 0 to 800 psia (0 to 55.2 bar)
Absolute 0 to 3626 psia (0 to 250 bar)
Gage -14.2 to 800 psig (-0.979 to 55.2 bar)
Gage -14.2 to 3626 psig (-0.979 to 250 bar)
Transmitter Output
Standard
A
F
X(8)
4–20 mA with digital signal based on HART protocol
FOUNDATION fieldbus protocol (requires PlantWeb housing)
Wireless (Requires wireless options and Wireless Plantweb housing)
www.rosemount.com
29
Rosemount 3051S Series
January 2013
Table 4. Rosemount 3051SFA Annubar Flowmeter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Transmitter Housing Style
Standard
00
1A
1B
1J
1K
2A
2B
2E
2F
2J
2M
5A(9)
5J(9)
7J(8)(10)
Expanded
1C
1L
2C
2G
None (Customer-supplied electrical connection)
PlantWeb housing
PlantWeb housing
PlantWeb housing
PlantWeb housing
Junction Box housing
Junction Box housing
Junction Box housing with output for remote display and
interface
Junction Box housing with output for remote display and
interface
Junction Box housing
Junction Box housing with output for remote display and
interface
Wireless PlantWeb housing
Wireless PlantWeb housing
Quick Connect (A size Mini, 4-pin male termination)
PlantWeb housing
PlantWeb housing
Junction Box housing
Junction Box housing with output for remote display and
interface
Material
Conduit Entry
Size
Aluminum
Aluminum
SST
SST
Aluminum
Aluminum
1
Aluminum
1/2-14 NPT
Aluminum
M20 x 1.5
SST
1
SST
1/2-14 NPT
Aluminum
SST
1/2-14 NPT
Aluminum
SST
Aluminum
G1/2
G1/2
G1/2
Aluminum
G1/2
/2-14 NPT
M20 x 1.5
1/2-14 NPT
M20 x 1.5
1
/2-14 NPT
M20 x 1.5
/2-14 NPT
1
/2-14 NPT
D
1-7
•
•
•
•
•
•
•
•
—
•
•
•
•
—
—
—
•
—
★
•
•
—
—
★
•
•
•
—
—
—
★
★
★
•
•
•
•
•
•
—
—
Standard
★
★
★
★
★
★
★
★
★
Performance Class(11)
Standard
3051S MultiVariable SuperModule, Measurement Types 1, 2, 5, and 6
Ultra for Flow: 0.8% flow rate accuracy, 14:1 flow turndown, 10-year stability, limited 12-year
3
warranty
5
Classic MV: 1.15% flow rate accuracy, 8:1 flow turndown, 5-yr. stability
3051S Single Variable SuperModule, Measurement Types 3, 4, 7, and D
1
Ultra: up to 0.95% flow rate accuracy, 8:1 flow turndown, 10-year stability, limited 12-year warranty
2
Classic: up to 1.4% flow rate accuracy, 8:1 flow turndown, 5-year stability
Ultra for Flow: 0.8% flow rate accuracy, 14:1 flow turndown, 10-year stability, limited 12-year
(12)
3
warranty
Standard
•
•
★
—
•
★
•
•
•
—
—
•
★
★
Update Rate, Operating Frequency and Protocol
D
1-7
Standard
WA
•
—
Standard
★
•
—
Standard
★
External Antenna
Extended Range, External Antenna
•
•
—
—
Standard
★
★
High-Gain, Remote Antenna
•
—
•
—
★
Wireless Options (Requires option code X and wireless PlantWeb housing)
User Configurable Update Rate
Operating Frequency and Protocol
Standard
3
2.4 GHz DSSS, IEC 62591 (WirelessHART)
Omnidirectional Wireless Antenna
Standard
WK
WM
Expanded
WN
SmartPower™ Adapter
Standard
1(13)
30
Adapter for Black Power Module (I.S. Power Module Sold Separately)
Standard
★
www.rosemount.com
January 2013
Rosemount 3051S Series
Table 4. Rosemount 3051SFA Annubar Flowmeter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Other Options (Include with selected model number)
Pressure Testing
Expanded
P1(14)
PX(14)
D
1-7
Hydrostatic Testing with Certificate
Extended Hydrostatic Testing
•
•
•
•
Cleaning for Special Services
Cleaning per ASTM G93 level D (section 11.4)
•
•
•
•
Dye Penetrant Exam
•
•
Radiographic Examination
•
•
Flow Calibration (Average K)
Special Calibration
•
•
•
•
Visual & Dimensional Inspection with Certificate
Inspection & Performance Certificate
•
•
•
•
Standard
★
★
Surface finish for Low Pipe Reynolds Number in Gas & Steam
Surface finish for High Pipe Reynolds Number in Liquid
•
•
•
•
Standard
★
★
•
•
Standard
★
•
•
•
•
•
•
European Pressure Directive (PED)
•
•
Canadian Registration
•
•
•
•
•
•
•
•
Special Cleaning
Expanded
P2
PA
Material Testing
Expanded
V1
Material Examination
Expanded
V2
Flow Calibration
Expanded
W1
WZ
Special Inspection
Standard
QC1
QC7
Surface Finish
Standard
RL
RH
Material Traceability Certification
Standard
Q8(15)
Material Traceability Certificate per EN 10204:2004 3.1
Code Conformance
Expanded
J2(16)
J3(16)
ANSI / ASME B31.1
ANSI / ASME B31.3
Material Conformance
Expanded
J5(17)
NACE MR-0175 / ISO 15156
Country Certification
Standard
J6
Expanded
J1
Standard
★
Installed in Flanged Pipe Spool Section
Expanded
H3
H4
H5
150# Flanged Connection with Rosemount Standard Length and Schedule
300# Flanged Connection with Rosemount Standard Length and Schedule
600# Flanged Connection with Rosemount Standard Length and Schedule
www.rosemount.com
31
Rosemount 3051S Series
January 2013
Table 4. Rosemount 3051SFA Annubar Flowmeter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Instrument Connections for Remote Mount Option
Standard
G2
G6
Expanded
G1
G3
G5
G7
D
1-7
Needle Valves, Stainless Steel
OS&Y Gate Valve, Stainless Steel
•
•
•
•
Needle Valves, Carbon Steel
Needle Valves, Alloy C-276
OS&Y Gate Valve, Carbon Steel
OS&Y Gate Valve, Alloy C-276
•
•
•
•
•
•
•
•
Mounting Hardware Shipped Separately
•
•
Attach to Transmitter
•
•
•
•
•
•
•
•
•
•
•
•
Standard
★
★
•
•
—
—
Standard
★
★
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
—
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Standard
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
Standard
★
★
Special Shipment
Standard
Y1
Standard
★
Attach To
Expanded
H1
Special Dimensions
Expanded
VM
VT
VS
Variable Mounting
Variable Tip
Variable length Spool Section
Transmitter Calibration Certification
Standard
Q4
QP
Calibration Certificate for Transmitter
Calibration Certificate & Tamper Evident Seal
Quality Certification For Safety
Standard
QS(20)(26)
QT(19)(20)(26)
Prior-use Certificate of FMEDA data
Safety certified to IEC 61508 with certificate of FMEDA data
Product Certifications
Standard
E1
I1
IA
N1
ND
K1
E4
E5
I5
K5
E6(18)
I6
K6(18)
E7
I7
K7
E3
I3
KA(18)
32
ATEX Flameproof
ATEX Intrinsic Safety
ATEX FISCO Intrinsic Safety; for FOUNDATION fieldbus protocol only
ATEX Type n
ATEX Dust
ATEX Flameproof, Intrinsic Safety, Type n, Dust (combination of E1, I1, N1, and ND)
TIIS Flameproof
FM Explosion-proof, Dust Ignition-proof
FM Intrinsically Safe, Division 2
FM Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2 (combination of E5 and I5)
CSA Explosion-proof, Dust Ignition-proof, Division 2
CSA Intrinsically Safe
CSA Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2 (combination of E6 and I6)
IECEx Flameproof, Dust Ignition-proof
IECEx Intrinsic Safety
IECEx Flameproof, Dust Ignition-proof, Intrinsic Safety, Type n (combination of E7, I7, and N7)
China Flameproof
China Intrinsic Safety
ATEX and CSA Explosion-proof, Intrinsically Safe, Division 2 (combination of E1, I1, E6, and I6)
www.rosemount.com
January 2013
Rosemount 3051S Series
Table 4. Rosemount 3051SFA Annubar Flowmeter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Expanded
KB(18)
KC
KD(18)
D
•
1-7
•
•
•
•
•
★
★
•
•
Standard
★
•
•
•
•
•
•
Standard
★
★
★
•
•
•
•
•
N/A
N/A
N/A
Standard
★
★
★
★
•
•
Standard
★
3-Valve Manifold, Stainless Steel
5-Valve Manifold, Stainless Steel
•
•
•
•
Standard
★
★
3-Valve Manifold, Carbon Steel
3-Valve Manifold, Alloy C-276
5-Valve Manifold, Carbon Steel
5-Valve Manifold, Alloy C-276
•
•
•
•
•
•
•
•
•
—
Standard
★
•
•
—
—
Standard
★
★
•
—
Standard
★
—
•
Standard
★
•
•
•
•
•
•
•
•
•
•
Standard
★
★
★
★
★
FM and CSA Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2
(combination of E5, E6, I5, and I6)
FM and ATEX Explosion-proof, Intrinsically Safe, Division 2 (combination of E5, E1, I5, and I1)
FM, CSA, and ATEX Explosion-proof, Intrinsically Safe (combination of E5, I5, E6, I6, E1, and I1)
★
Shipboard Approvals
Standard
SBS
American Bureau of Shipping
Sensor Fill Fluid and O-ring Options
Standard
L1
L2
LA
Inert Sensor Fill Fluid
Graphite-Filled (PTFE) O-ring
Inert Sensor Fill Fluid and Graphite-Filled (PTFE) O-ring
Digital Display(19)
Standard
M5
M7(20)(21)(22)
M8(20)(21)
M9(20)(21)
PlantWeb LCD display (Requires PlantWeb housing)
Remote mount LCD display and interface, PlantWeb housing, no cable; SST bracket
Remote mount LCD display and interface, PlantWeb housing, 50 ft. (15 m) cable; SST bracket
Remote mount LCD display and interface, PlantWeb housing, 100 ft. (31 m) cable; SST bracket
Transient Protection
Standard
T1(23)
Transient terminal block
Manifold for Remote Mount Option
Standard
F2
F6
Expanded
F1
F3
F5
F7
PlantWeb Control Functionality
Standard
A01
FOUNDATION fieldbus Advanced Control Function Block Suite
PlantWeb Diagnostic Functionality
Standard
D01
DA2(24)
FOUNDATION fieldbus Diagnostics Suite
Advanced HART Diagnostic Suite
PlantWeb Enhanced Measurement Functionality
Standard
H01(25)
FOUNDATION fieldbus Fully Compensated Mass Flow Block
Cold Temperature
Standard
BRR
-60 °F (-51 °C) Cold Temperature Start-up
Alarm Limit(20)(26)
Standard
C4
C5
C6
C7
C8
NAMUR Alarm & Saturation Levels, High Alarm
NAMUR Alarm & Saturation Levels, Low Alarm
Custom Alarm & Saturation Levels, High Alarm
Custom Alarm & Saturation Levels, Low Alarm
Low Alarm (Standard Rosemount Alarm & Saturation Levels)
www.rosemount.com
33
Rosemount 3051S Series
January 2013
Table 4. Rosemount 3051SFA Annubar Flowmeter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Hardware Adjustments and Ground Screw
D
1-7
Standard
D1(20)(26)(27)
D4(28)
DA(20)(26)(27)
Hardware Adjustments (zero, span, alarm, security)
External Ground Screw Assembly
Hardware Adjustments (zero, span, alarm, security) & External Ground Screw Assembly
•
•
•
—
•
—
Standard
★
★
★
316 SST Conduit Plug (standard for all 3051SF Models)
•
•
Standard
★
•
•
•
•
Standard
★
★
Conduit Plug
Standard
DO
Conduit Electrical Connector
Standard
GE(29)
GM(29)
M12, 4-pin, Male Connector (eurofast®)
A size Mini, 4-pin, Male Connector (minifast®)
Typical Model Number:
3051SFA
D
L
060
D
C
H
P
S
2
T1
0
0
0
3
2A
A
1A
3
(1) Provide the “A” dimension for Flanged, Flange-Lok, and Threaded Flo-Tap models. Provide the “B” dimension for Flange Flo-Tap models.
(2) Available in remote mount applications only.
(3) The cage nipple is constructed of 304SST.
(4) Temperature Measurement Option code T or R is required for Measurement Type codes 1, 3, 5, and 7.
(5) Required for Measurement Type codes 2, 4, 6, and D.
(6) Required for Measurement Type codes 3, 4, 7, and D.
(7) For Measurement Type codes 1, 2, 5, and 6 with DP range 1, absolute limits are 0.5 to 2000 psi (0,03 to 137,9 bar) and gage limits are
-14.2 to 2000 psig (-0,98 to 137,9 bar).
(8) Only intrinsically safe approval codes apply.
(9) Only available with output code X.
(10) Only available with output code A.
(11) For detailed specifications see “Specifications” on page 79.
(12) Only available with differential pressure ranges 2 and 3, and silicone fill fluid.
(13) Long-life Power Module must be shipped separately, order Power Module 701PBKKF.
(14) Applies to assembled flowmeter only, mounting not tested.
(15) Instrument Connections for Remote Mount Options and Isolation Valves for Flo-tap Models are not included in the Material Traceability Certification.
(16) Not available with Transmitter Connection Platform 6.
(17) Materials of Construction comply with metallurgical requirements within NACE MR0175/ISO 15156 for sour oil field production environments. Environmental limits
apply to certain materials. Consult latest standard for details. Selected materials also conform to NACE MR0103 for sour refining environments.
(18) Not available with M20 or G ½ conduit entry size.
(19) Not available with housing code 7J.
(20) Not available with output code X.
(21) Not available with output code F, option code DA2, or option code QT.
(22) See the 3051S Reference Manual (document number 00809-0100-4801) for cable requirements. Contact an Emerson Process Management representative for
additional information.
34
www.rosemount.com
January 2013
Rosemount 3051S Series
(23) Not available with Housing code 5A, 5J, or 7J. External ground screw assembly (option code D4) is included with the T1 option. The T1 option is not needed with FISCO
Product Certifications, transient protection is included with the FISCO Product Certification code IA.
(24) Includes Hardware Adjustments (option code D1) as standard. Not available with output code X.
(25) Requires Rosemount Engineering Assistant version 5.5.1 to configure.
(26) Not available with output code F.
(27) Not available with housing codes 2E, 2F, 2G, 2M, 5A, 5J, or 7J.
(28) This assembly is included with certification options E1, N1, K1, ND, E4, E7, N7, K7, E2, E3, KA, KC, and KD.
(29) Not available with Housing code 5A, 5J, or 7J. Available with Intrinsically Safe approvals only. For FM Intrinsically Safe, Division 2 (option code I5) or FM FISCO
Intrinsically Safe (option code IE), install in accordance with Rosemount drawing 03151-1009.
www.rosemount.com
35
Rosemount 3051S Series
January 2013
Rosemount 3051SFC Compact Orifice Flowmeter

Compact Conditioning flowmeters reduce straight piping requirements to 2D upstream and 2D downstream
from a flow disturbance

Simple installation of Compact flowmeters between any existing raised-face flanges
Table 5. Rosemount 3051SFC Compact Orifice Flowmeter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Model
3051SFC
Product Description
Compact Orifice Flowmeter
Measurement
• = Available
Type
—=
D
1-7
•
•
Unavailable
Measurement Type
Standard
Standard
1
Fully Compensated Mass & Energy Flow Calculations – Differential & Static Pressures w/ Temperature
—
•
★
2
Compensated Flow Calculations – Differential & Static Pressures
—
•
★
3
Compensated Flow Calculations – Differential Pressure & Temperature
—
•
★
4
Compensated Flow Calculations – Differential Pressure
—
•
★
D
Differential Pressure
•
—
★
5
Process Variables Only (No Flow Calculations) – Differential & Static Pressures w/ Temperature
—
•
6
Process Variables Only (No Flow Calculations) – Differential & Static Pressures
—
•
7
Process Variables Only (No Flow Calculations) – Differential Pressure & Temperature
—
•
Expanded
Primary Element Technology
Standard
Standard
A
Annubar® Averaging Pitot Tube
•
•
★
C
Conditioning Orifice Plate
•
•
★
P
Orifice Plate
•
•
★
316 SST
•
•
005(1)
1
•
•
★
010(1)
1-in. (25 mm)
•
•
★
015(1)
11/2-in. (40 mm)
•
•
★
020
2-in. (50 mm)
•
•
★
030
3-in. (80 mm)
•
•
★
040
4-in. (100 mm)
•
•
★
060
6-in. (150 mm)
•
•
★
080
8-in. (200 mm)
•
•
★
100(2)(3)
10-in. (250 mm)
•
•
★
120(2)(3)
12-in. (300 mm)
•
•
★
Material Type
Standard
S
Standard
★
Line Size
Standard
Standard
/2-in. (15 mm)
Primary Element Type
Standard
Standard
N000
Annubar Sensor Size 1
•
•
★
N040
0.40 Beta Ratio ()
•
•
★
N065(4)
0.65 Beta Ratio ()
•
•
★
36
www.rosemount.com
January 2013
Rosemount 3051S Series
Table 5. Rosemount 3051SFC Compact Orifice Flowmeter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Temperature Measurement
D
1-7
Standard
Standard
T(6)
Integral RTD
—
•
★
0(5)
No Temperature Sensor
•
•
★
Remote Thermowell and RTD
•
•
Expanded
R(6)
Transmitter Connection Platform
Standard
Standard
3
Direct-mount
•
•
★
7
Remote-mount, NPT Connections
•
•
★
Differential Pressure Range
Standard
Standard
1
0 to 25 inH2O (0 to 62.3 mbar)
•
•
★
2
0 to 250 inH2O (0 to 623 mbar)
•
•
★
3
0 to 1000 inH2O (0 to 2.5 bar)
•
•
★
Static Pressure Range
Standard
Standard
A(7)
None
•
•
★
D
Absolute 0 to 800 psia (0 to 55.2 bar)
—
•
★
E(8)
Absolute 0 to 3626 psia (0 to 250 bar)
—
•
★
J
Gage -14.2 to 800 psig (-0.979 to 55.2 bar)
—
•
★
K(8)
Gage -14.2 to 3626 psig (-0.979 to 250 bar)
—
•
★
Transmitter Output
Standard
Standard
A
4–20 mA with digital signal based on HART protocol
•
•
★
F(9)
FOUNDATION fieldbus protocol
•
—
★
X(10)(11)
Wireless
•
—
★
•
—
★
Transmitter Housing Style
Material
Conduit Entry Size
Standard
Standard
00
None (Customer-supplied electrical connection)
1A
PlantWeb housing
Aluminum
1
•
•
★
1B
PlantWeb housing
Aluminum
M20 x 1.5
•
•
★
1J
PlantWeb housing
SST
1
•
•
★
1K
PlantWeb housing
SST
M20 x 1.5
•
•
★
2A
Junction Box housing
Aluminum
1
•
—
★
2B
Junction Box housing
Aluminum
M20 x 1.5
•
—
★
2E
Junction Box housing with output for remote display and
interface
Aluminum
1
•
—
★
2F
Junction Box housing with output for remote display and
interface
Aluminum
M20 x 1.5
•
—
★
SST
1
/2-14 NPT
•
—
★
—
★
/2-14 NPT
/2-14 NPT
/2-14 NPT
/2-14 NPT
2J
Junction Box housing
2M
Junction Box housing with output for remote display and
interface
SST
1/2-14 NPT
•
5A(12)
Wireless PlantWeb housing
Aluminum
1
•
—
★
(12)
5J
Wireless PlantWeb housing
SST
1
•
—
★
7J(10)(13)
Quick Connect (A size Mini, 4-pin male termination)
•
—
★
•
/2-14 NPT
/2-14 NPT
Expanded
1C
PlantWeb housing
Aluminum
G1/2
•
1L
PlantWeb housing
SST
G1/2
•
•
2C
Junction Box housing
Aluminum
G1/2
•
—
2G
Junction Box housing with output for remote display and
interface
Aluminum
G1/2
•
—
www.rosemount.com
37
Rosemount 3051S Series
January 2013
Table 5. Rosemount 3051SFC Compact Orifice Flowmeter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Performance Class(14)
D
1-7
•
•
Standard
Standard
3051S MultiVariable SuperModule, Measurement Types 1, 2, 5, and 6
3
Ultra for Flow: 0.75% flow rate accuracy, 14:1 flow turndown, 10-yr stability, limited 12-yr warranty
•
•
★
5
Classic MV: 1.10% flow rate accuracy, 8:1 flow turndown, 5-yr stability
—
•
★
3051S Single Variable SuperModule, Measurement Types 3, 4, 7, and D
•
•
1
Ultra: 0.90% flow rate accuracy, 8:1 flow turndown, 10-yr stability, limited 12-yr warranty
•
—
★
2
Classic: 1.40% flow rate accuracy, 8:1 flow turndown, 5-yr stability
•
—
★
3(15)
Ultra for Flow: 0.75% flow rate accuracy, 14:1 flow turndown, 10-yr stability, limited 12-yr warranty
•
•
★
D
1-7
•
—
★
•
—
★
Wireless Options (Requires option code X and wireless PlantWeb housing)
Update Rate, Operating Frequency, and Protocol
Standard
WA
Standard
User Configurable Update Rate
Operating Frequency and Protocol
Standard
3
2.4 GHz DSSS, IEC 62591 (WirelessHART)
Omnidirectional Wireless Antenna
Standard
WK
External Antenna
•
—
★
WM
Extended Range, External Antenna
•
—
★
High-Gain, Remote Antenna
•
—
Adapter for Black Power Module (I.S. Power Module Sold Separately)
•
—
D
1-7
Expanded
WN
SmartPower™
Standard
1(16)
★
Other Options (Include with selected model number)
Installation Accessories
Standard
Standard
A
ANSI Alignment Ring (150#) (Only required for 10-in. (250 mm) and 12-in. (300mm) line sizes)
•
•
★
C
ANSI Alignment Ring (300#) (Only required for 10-in. (250 mm) and 12-in. (300mm) line sizes)
•
•
★
D
ANSI Alignment Ring (600#) (Only required for 10-in. (250 mm) and 12-in. (300mm) line sizes)
•
•
★
G
DIN Alignment Ring (PN 16)
•
•
★
H
DIN Alignment Ring (PN 40)
•
•
★
J
DIN Alignment Ring (PN 100)
•
•
★
B
JIS Alignment Ring (10K)
•
•
R
JIS Alignment Ring (20K)
•
•
S
JIS Alignment Ring (40K)
•
•
Flange adapters 316 SST (1/2-in. NPT)
•
•
Graphite Valve Packing (Tmax = 850 °F)
•
•
WC(17)
Flow Calibration, 3 Pt, Conditioning Option C (All Pipe Schedules)
•
•
WD(18) (19)
Flow Calibration, 10 Pt, Conditioning Option C (All Schedules), Annubar Option A (Schedule 40)
•
•
Expanded
Remote Adapters
Standard
E
Standard
★
High Temperature Applications
Expanded
T
Flow Calibration
Expanded
38
www.rosemount.com
January 2013
Rosemount 3051S Series
Table 5. Rosemount 3051SFC Compact Orifice Flowmeter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Pressure Testing
D
1-7
Hydrostatic Testing with Certificate
•
•
P2(20)
Cleaning for Special Processes
•
•
PA
Cleaning per ASTM G93 Level D (section 11.4)
•
•
Expanded
P1
Special Cleaning
Expanded
Special Inspection
Standard
Standard
QC1
Visual & Dimensional Inspection with Certificate
•
•
★
QC7
Inspection & Performance Certificate
•
•
★
Transmitter Calibration Certification
Standard
Standard
Q4
Calibration Data Certificate for Transmitter
•
•
★
QP
Calibration Certificate and Tamper Evident Seal
•
•
★
Quality Certification for Safety
Standard
Standard
QS(21)(22)
Prior-use certificate of FMEDA data
•
—
★
QT(21)(22)(25)
Safety Certified to IEC 61508 with certificate of FMEDA data
•
—
★
•
•
Material Traceability Certifications
Standard
Q8
Standard
Material Traceability Certification per EN 10204:2004 3.1
★
Code Conformance
Expanded
J2
ANSI / ASME B31.1
•
•
J3
ANSI / ASME B31.3
•
•
J4
ANSI / ASME B31.8
•
•
•
•
•
•
Material Conformance
Expanded
J5(23)
NACE MR-0175 / ISO 15156
Country Certification
Expanded
J1
Canadian Registration
Product Certifications
Standard
Standard
E1
ATEX Flameproof
•
•
★
I1
ATEX Intrinsic Safety
•
•
★
IA
ATEX FISCO Intrinsic Safety; for FOUNDATION fieldbus protocol only
•
—
★
N1
ATEX Type n
•
•
★
ND
ATEX Dust
•
•
★
K1
ATEX Flameproof, Intrinsic Safety, Type n, Dust (combination of E1, I1, N1, and ND)
•
•
★
E4
TIIS Flameproof
•
•
★
E5
FM Explosion-proof, Dust Ignition-proof
•
•
★
I5
FM Intrinsically Safe, Division 2
•
•
★
K5
FM Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2 (combination of E5 and I5)
•
•
★
E6(24)
CSA Explosion-proof, Dust Ignition-proof, Division 2
•
•
★
I6
CSA Intrinsically Safe
•
•
★
K6(24)
CSA Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2 (combination of E6 and I6)
•
•
★
E7
IECEx Flameproof, Dust Ignition-proof
•
•
★
I7
IECEx Intrinsic Safety
•
•
★
www.rosemount.com
39
Rosemount 3051S Series
January 2013
Table 5. Rosemount 3051SFC Compact Orifice Flowmeter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Standard
D
1-7
Standard
K7
IECEx Flameproof, Dust Ignition-proof, Intrinsic Safety, Type n (combination of E7, I7, and N7)
•
•
★
E3
China Flameproof
•
•
★
I3
China Intrinsic Safety
•
•
★
KA(24)
ATEX and CSA Flameproof, Intrinsically Safe, Division 2 (combination of E1, I1, E6, and I6)
•
•
★
KB(24)
FM and CSA Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2 (combination of E5, E6,
I5, and I6)
•
•
★
KC
FM and ATEX Explosion-proof, Intrinsically Safe, Division 2 (combination of E5, E1, I5, and I1)
•
•
★
KD(24)
FM, CSA, and ATEX Explosion-proof, Intrinsically Safe (combination of E5, E6, E1, I5, I6, and I1)
•
•
★
•
•
★
Shipboard Approvals
Standard
SBS
American Bureau of Shipping
Sensor Fill Fluid and O-ring Options
Standard
Standard
L1
Inert Sensor Fill Fluid
•
•
★
L2
Graphite-filled (PTFE) O-ring
•
•
★
LA
Inert sensor fill fluid and graphite-filled (PTFE) O-ring
•
•
★
Digital Display(25)
Standard
Standard
M5
PlantWeb LCD display
•
•
★
M7(22)(26)(27)
Remote mount LCD display and interface, PlantWeb housing, no cable, SST bracket
•
N/A
★
M8(22)(26)
Remote mount LCD display and interface, PlantWeb housing, 50 ft. (15m) cable, SST bracket
•
N/A
★
M9(22)(26)
Remote mount LCD display and interface, PlantWeb housing, 100 ft. (31m) cable, SST bracket
•
N/A
★
•
•
Transient Protection
Standard
T1(28)
Standard
Transient terminal block
★
Manifold for Remote Mount Option
Standard
Standard
F2
3-Valve Manifold, SST
•
•
★
F6
5-Valve Manifold, SST
•
•
★
•
—
PlantWeb Control Functionality
Standard
A01
Standard
FOUNDATION fieldbus Advanced Control Function Block Suite
★
PlantWeb Diagnostic Functionality
Standard
Standard
D01
FOUNDATION fieldbus Diagnostics Suite
•
—
★
DA2(29)
Advanced HART Diagnostic Suite
•
—
★
•
—
•
•
PlantWeb Enhanced Measurement Functionality
Standard
H01(30)
Standard
FOUNDATION fieldbus Fully Compensated Mass Flow Block
★
Cold Temperature
Standard
BRR
Standard
-60 °F (-51 °C) Cold Temperature Start-up
★
Alarm Limit(21)(22)
Standard
Standard
C4
NAMUR Alarm & Saturation Levels, High Alarm
•
•
★
C5
NAMUR Alarm & Saturation Levels, Low Alarm
•
•
★
C6
Custom Alarm & Saturation Levels, High Alarm
•
•
★
C7
Custom Alarm & Saturation Levels, Low Alarm
•
•
★
C8
Low Alarm (Standard Rosemount Alarm & Saturation Levels)
•
•
★
40
www.rosemount.com
January 2013
Rosemount 3051S Series
Table 5. Rosemount 3051SFC Compact Orifice Flowmeter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Hardware Adjustments and Ground Screw
D
1-7
Standard
Standard
D1(21)(22)(31)
Hardware Adjustments (zero, span, alarm, security).
•
—
★
D4(32)
External ground screw assembly
•
•
★
DA(21)(22)(31)
Hardware adjustments (zero, span, alarm, security) and external ground screw assembly
•
—
★
316 SST Conduit Plug
•
•
Conduit Plug
Standard
DO
Standard
★
Conduit Electrical Connector
Standard
Standard
ZE(33)
M12, 4-pin, Male Connector (eurofast)
•
•
★
ZM(33)
A size Mini, 4-pin, Male Connector (minifast)
•
•
★
Typical Model Number:
3051SFC 1 C S 060 N 065 T 3 2 J A 1A 3
(1) Available with primary element technology P only.
(2) For the 10-in. (250 mm) and 12-in. (300 mm) line sizes, the alignment ring must be ordered (Installation Accessories).
(3) 10-in. (250 mm) and 12-in. (300 mm) line sizes not available with Primary Element Technology code A.
(4) For 2-in. (50 mm) line size the beta ratio is 0.6 for Primary Element Technology code C.
(5) Required for Measurement Type codes 2, 4, 6, and D.
(6) Only available with Measurement Type codes 1, 3, 5, 7.
(7) Required for Measurement Type codes 3, 4, 7, and D.
(8) For Measurement Type codes 1, 2, 5, and 6 with DP range 1, absolute limits are 0.5 to 2000 psi (0,03 to 137,9 bar) and gage limits are
-14.2 to 2000 psig (-0,98 to 137,9 bar).
(9) Requires PlantWeb housing.
(10) Only intrinsically safe approval codes apply.
(11) Requires wireless options and wireless PlantWeb housing.
(12) Only available with output code X.
(13) Available with output code A only.
(14) For detailed specifications see “Specifications” on page 79.
(15) Only available with differential pressure ranges 2 and 3, and silicone fill fluid.
(16) Long-life Power Module must be shipped separately, order Power Module 701PBKKF.
(17) Available with Primary Element Technology code C only.
(18) Available with Primary Element Technology codes C or A only.
(19) For Annubar Option A, consult factory for pipe schedules other than Sch. 40.
(20) Available with primary element technology C or P only.
(21) Not available with Output Protocol code F.
(22) Not available with output code X.
www.rosemount.com
41
Rosemount 3051S Series
January 2013
(23) Materials of Construction comply with metallurgical requirements within NACE MR0175/ISO for sour oil field production environments. Environmental limits apply
to certain materials. Consult latest standard for details. Selected materials also conform to NACE MR0103 for sour refining environments.
(24) Not available with M20 or G ½ conduit entry size.
(25) Not available with housing code 7J.
(26) Not available with output code F, option code DA2, or option code QT.
(27) See the 3051S Reference Manual (document number 00809-0100-4801) for cable requirements. Contact an Emerson Process Management representative for
additional information.
(28) Not available with Housing code 00, 5A, 5J, or 7J. External ground screw assembly (option code D4) is included with the T1 option. The T1 option is not needed with
FISCO Product Certifications, transient protection is included with the FISCO Product Certification code IA.
(29) Includes Hardware Adjustments (option code D1) as standard. Not available with output code X.
(30) Requires Rosemount Engineering Assistant version 5.5.1 to configure.
(31) Not available with housing codes 2E, 2F, 2G, 2M, 5A, 5J, or 7J.
(32) This assembly is included with certification options E1, N1, K1, ND, E4, E7, N7, K7, E3, KA, KC, and KD.
(33) Not available with Housing code 5A, 5J, or 7J. Available with Intrinsically Safe approvals only. For FM Intrinsically Safe, Division 2 (option code I5) or FM FISCO
Intrinsically Safe (option code IE), install in accordance with Rosemount drawing 03151-1009.
42
www.rosemount.com
January 2013
Rosemount 3051S Series
Rosemount 3051SFP Integral Orifice Flowmeter

Precision honed pipe section for increased accuracy in small line sizes

Self-centering plate design prevents alignment errors that magnify measurement inaccuracies in small line
sizes
Table 6. Rosemount 3051SFP Integral Orifice Flowmeter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Model
3051SFP
Product Description
Integral Orifice Flowmeter
Measurement
• = Available
Type
— = Unavailable
D
1-7
•
•
Measurement Type
Standard
Standard
1
Fully Compensated Mass & Energy Flow Calculations – Differential & Static Pressures w/ Temperature
—
•
★
2
Compensated Flow Calculations – Differential & Static Pressures
—
•
★
3
Compensated Flow Calculations – Differential Pressure & Temperature
—
•
★
4
Compensated Flow Calculations – Differential Pressure
—
•
★
D
Differential Pressure
•
—
★
5
Process Variables Only (No Flow Calculations) – Differential & Static Pressures w/ Temperature
—
•
6
Process Variables Only (No Flow Calculations) – Differential & Static Pressures
—
•
7
Process Variables Only (No Flow Calculations) – Differential Pressure & Temperature
—
•
316 SST
•
•
005
1
•
•
★
010
1-in. (25 mm)
•
•
★
015
11/2-in. (40 mm)
•
•
★
Expanded
Body Material
Standard
S
Standard
★
Line Size
Standard
Standard
/2-in. (15 mm)
Process Connection
Standard
Standard
T1
NPT Female Body (Not Available with Remote Thermowell and RTD)
•
•
★
S1(1)
Socket Weld Body (Not Available with Remote Thermowell and RTD)
•
•
★
P1
Pipe Ends: NPT threaded
•
•
★
P2
Pipe Ends: Beveled
•
•
★
D1
Pipe Ends: Flanged, DIN PN16, slip-on
•
•
★
D2
Pipe Ends: Flanged, DIN PN40, slip-on
•
•
★
D3
Pipe Ends: Flanged, DIN PN100, slip-on
•
•
★
W1
Pipe Ends: Flanged, ANSI Class 150, weld-neck
•
•
★
W3
Pipe Ends: Flanged, ANSI Class 300, weld-neck
•
•
★
W6
Pipe Ends: Flanged, ANSI Class 600, weld-neck
•
•
★
A1
Pipe Ends: Flanged, RF, ANSI Class 150, slip-on
•
•
A3
Pipe Ends: Flanged, RF, ANSI Class 300, slip-on
•
•
A6
Pipe Ends: Flanged, RF, ANSI Class 600, slip-on
•
•
R1
Pipe Ends: Flanged, RTJ, ANSI Class 150, slip-on
•
•
R3
Pipe Ends: Flanged, RTJ, ANSI Class 300, slip-on
•
•
R6
Pipe Ends: Flanged, RTJ, ANSI Class 600, slip-on
•
•
P9
Special Process Connection
•
•
Expanded
www.rosemount.com
43
Rosemount 3051S Series
January 2013
Table 6. Rosemount 3051SFP Integral Orifice Flowmeter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Orifice Plate Material
D
1-7
316 SST
•
•
H
Alloy C-276
•
•
M
Alloy 400
•
•
0066
0.066-in. (1.68 mm) for 1/2-in. pipe
•
•
★
0109
0.109-in. (2.77 mm) for 1/2-in. pipe
•
•
★
0160
0.160-in. (4.06 mm) for 1/2-in. pipe
•
•
★
0196
0.196-in. (4.98 mm) for 1/2-in. pipe
•
•
★
0260
0.260-in. (6.60 mm) for 1/2-in. pipe
•
•
★
0340
0.340-in. (8.64 mm) for 1/2-in. pipe
•
•
★
0150
0.150-in. (3.81 mm) for 1-in. pipe
•
•
★
0250
0.250-in. (6.35 mm) for 1-in. pipe
•
•
★
0345
0.345-in. (8.76 mm) for 1-in. pipe
•
•
★
0500
0.500-in. (12.70 mm) for 1-in. pipe
•
•
★
0630
0.630-in. (16.00 mm) for 1-in. pipe
•
•
★
0800
0.800-in. (20.32 mm) for 1-in. pipe
•
•
★
0295
0.295-in. (7.49 mm) for 11/2-in. pipe
•
•
★
0376
0.376-in. (9.55 mm) for 11/2-in. pipe
•
•
★
0512
0.512-in. (13.00 mm) for 11/2-in. pipe
•
•
★
0748
0.748-in. (19.00 mm) for 11/2-in. pipe
•
•
★
1022
1.022-in. (25.96 mm) for 11/2-in. pipe
•
•
★
1184
1.184-in. (30.07 mm) for 11/2-in. pipe
•
•
★
0010
0.010-in. (0.25 mm) for 1/2-in. pipe
•
•
0014
0.014-in. (0.36 mm) for 1/2-in. pipe
•
•
0020
0.020-in. (0.51 mm) for 1/2-in. pipe
•
•
0034
0.034-in. (0.86 mm) for 1/2-in. pipe
•
•
Standard
S
Standard
★
Expanded
Bore Size Option
Standard
Standard
Expanded
Transmitter Connection Platform
Standard
Standard
D3
Direct-mount, 3-valve Manifold, SST
•
•
★
D5
Direct-mount, 5-valve Manifold, SST
•
•
★
R3
Remote-mount, 3-valve Manifold, SST
•
•
★
R5
Remote-mount, 5-valve Manifold, SST
•
•
★
D4
Direct-mount, 3-valve Manifold, Alloy C-276
•
•
D6
Direct-mount, 5-valve Manifold, Alloy C-276
•
•
D7
Direct-mount, High Temperature, 5-valve Manifold, SST
•
•
R4
Remote-mount, 3-valve Manifold, Alloy C-276
•
•
R6
Remote-mount, 5-valve Manifold, Alloy C-276
•
•
Expanded
Differential Pressure Range
Standard
Standard
1
0 to 25 inH2O (0 to 62.3 mbar)
•
•
★
2
0 to 250 inH2O (0 to 623 mbar)
•
•
★
3
0 to 1000 inH2O (0 to 2.5 bar)
•
•
★
44
www.rosemount.com
January 2013
Rosemount 3051S Series
Table 6. Rosemount 3051SFP Integral Orifice Flowmeter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Static Pressure Range
D
1-7
Standard
Standard
A(2)
None
•
•
★
D
Absolute 0 to 800 psia (0 to 55.2 bar)
—
•
★
E(3)
Absolute 0 to 3626 psia (0 to 250 bar)
—
•
★
J
Gage -14.2 to 800 psig (-0.979 to 55.2 bar)
—
•
★
K(3)
Gage -14.2 to 3626 psig (-0.979 to 250 bar)
—
•
★
Transmitter Output
Standard
Standard
A
4–20 mA with digital signal based on HART protocol
•
•
★
F
FOUNDATION fieldbus (Requires PlantWeb housing)
•
—
★
X(4)
Wireless (Requires wireless options and wireless PlantWeb housing)
•
—
★
•
—
★
Transmitter Housing Style
Material
Conduit Entry Size
Standard
Standard
00
None (Customer-supplied electrical connection)
1A
PlantWeb housing
Aluminum
1/2-14 NPT
•
•
★
1B
PlantWeb housing
Aluminum
M20 x 1.5
•
•
★
1J
PlantWeb housing
SST
1/2-14 NPT
•
•
★
1K
PlantWeb housing
SST
M20 x 1.5
•
•
★
2A
Junction Box housing
Aluminum
1/2-14 NPT
•
—
★
2B
Junction Box housing
Aluminum
M20 x 1.5
•
—
★
2E
Junction Box housing with output for remote
display and interface
Aluminum
1
•
—
★
2F
Junction Box housing with output for remote
display and interface
Aluminum
M20 x 1.5
•
—
★
•
—
★
—
★
/2-14 NPT
2J
Junction Box housing
SST
1
2M
Junction Box housing with output for remote
display and interface
SST
1/2-14 NPT
•
5A(5)
Wireless PlantWeb housing
Aluminum
1/2–14 NPT
•
—
★
5J(5)
Wireless PlantWeb housing
SST
1/2–14 NPT
•
—
★
7J(4)(6)
Quick Connect (A size Mini, 4-pin male termination)
•
—
★
•
/2-14 NPT
Expanded
1C
PlantWeb housing
Aluminum
G1/2
•
1L
PlantWeb housing
SST
G1/2
•
•
2C
Junction Box housing
Aluminum
G1/2
•
—
2G
Junction Box housing with output for remote
display and interface
Aluminum
G1/2
•
—
Performance Class(7)
Standard
Standard
3051S MultiVariable SuperModule, Measurement Types 1, 2, 5, and 6
3(8)
Ultra for Flow: 0.95% flow rate accuracy, 14:1 flow turndown, 10-year stability, limited 12-year
warranty
•
•
★
5
Classic MV: 1.25% flow rate accuracy, 8:1 flow turndown, 5-year stability
—
•
★
3051S Single Variable SuperModule, Measurement Types 3, 4, 7, and D
1
Ultra: 1.05% flow rate accuracy, 8:1 flow turndown, 10-year stability, limited 12-year warranty
•
•
★
2
Classic: 1.50% flow rate accuracy, 8:1 flow turndown, 5-year stability
•
•
★
3(8)
Ultra for Flow: 0.95% flow rate accuracy, 14:1 flow turndown, 10-year stability, limited 12-year
warranty
•
•
★
D
1-7
•
—
Wireless Options (Requires option code X and wireless PlantWeb housing)
Update Rate, Operating Frequency and Protocol
Standard
WA
Standard
User Configurable Update Rate
www.rosemount.com
★
45
Rosemount 3051S Series
January 2013
Table 6. Rosemount 3051SFP Integral Orifice Flowmeter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Operating Frequency and Protocol
D
1-7
•
—
★
Standard
3
2.4 GHz DSSS, IEC 62591 (WirelessHART)
Omnidirectional Wireless Antenna
Standard
WK
External Antenna
•
—
★
WM
Extended Range, External Antenna
•
—
★
High-Gain, Remote Antenna
•
—
Adapter for Black Power Module (I.S. Power Module Sold Separately)
•
—
D
1-7
•
•
•
•
DIN 19213 Transmitter Connection
•
•
Hydrostatic Testing with Certificate
•
•
P2
Cleaning for Special Services
•
•
PA
Cleaning per ASTM G93 Level D (Section 11.4)
•
•
Dye Penetrant Exam
•
•
Radiographic Examination (available only with Process Connection code W1, W3, and W6)
•
•
WD(13)
Discharge Coefficient Verification
•
•
WZ(13)
Special Calibration
•
•
Expanded
WN
SmartPower™
Standard
1(9)
Standard
★
Other Options (Include with selected model number)
Transmitter / Body Bolt Material
Expanded
G(10)
High temperature Option (850 °F (454 °C))
Temperature Sensor
Standard
T(11)
Standard
Thermowell and RTD
★
Optional Connection
Standard
G1
Standard
★
Pressure Testing
Expanded
P1(12)
Special Cleaning
Expanded
Material Testing
Expanded
V1
Material Examination
Expanded
V2
Flow Calibration
Expanded
Special Inspection
Standard
Standard
QC1
Visual & Dimensional Inspection with Certificate
•
•
★
QC7
Inspection & Performance Certificate
•
•
★
•
•
Material Traceability Certification
Standard
Q8
46
Standard
Material certification per EN 10204:2004 3.1
★
www.rosemount.com
January 2013
Rosemount 3051S Series
Table 6. Rosemount 3051SFP Integral Orifice Flowmeter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Code Conformance
D
1-7
Expanded
J2(14)
ANSI / ASME B31.1
•
•
J3(14)
ANSI / ASME B31.3
•
•
J4(14)
ANSI / ASME B31.8
•
•
•
•
European Pressure Directive (PED)
•
•
Canadian Registration
•
•
•
•
Materials Conformance
Expanded
J5(15)
NACE MR-0175 / ISO 15156
Country Certification
Standard
J6
Standard
★
Expanded
J1
Transmitter Calibration Certification
Standard
Q4
Standard
Calibration Data Certificate for Transmitter
★
Quality Certification for Safety
Standard
Standard
QS(16)(17)
Prior-use Certificate of FMEDA data
•
—
★
QT(16)(17)(19)
Safety-certified to IEC 61508 with Certificate of FMEDA data
•
—
★
Product Certifications
Standard
Standard
E1
ATEX Flameproof
•
•
★
I1
ATEX Intrinsic Safety
•
•
★
IA
ATEX FISCO Intrinsic Safety; for FOUNDATION fieldbus protocol only
•
—
★
N1
ATEX Type n
•
•
★
ND
ATEX Dust
•
•
★
K1
ATEX Flameproof, Intrinsic Safety, Type n, Dust (combination of E1, I1, N1, and ND)
•
•
★
E4
TIIS Flameproof
•
•
★
E5
FM Explosion-proof, Dust Ignition-proof
•
•
★
I5
FM Intrinsically Safe, Division 2
•
•
★
K5
FM Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2 (combination of E5 and I5)
•
•
★
E6(18)
CSA Explosion-proof, Dust Ignition-proof, Division 2
•
•
★
I6
CSA Intrinsically Safe
•
•
★
K6(18)
CSA Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2 (combination of E6 and I6)
•
•
★
E7
IECEx Flameproof, Dust Ignition-proof
•
•
★
I7
IECEx Intrinsic Safety
•
•
★
K7
IECEx Flameproof, Dust Ignition-proof, Intrinsic Safety, Type n (combination of E7, I7, and N7)
•
•
★
E3
China Flameproof
•
•
★
I3
China Intrinsic Safety
•
•
★
KA(18)
ATEX and CSA Flameproof, Intrinsically Safe, Division 2 (combination of E1, I1, E6, and I6)
•
•
★
KB
FM and CSA Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2 (combination of E5, E6,
I5, and I6)
•
•
★
KC
FM and ATEX Explosion-proof, Intrinsically Safe, Division 2 (combination of E5, E1, I5, and I1)
•
•
★
KD(18)
FM, CSA, and ATEX Explosion-proof, Intrinsically Safe (combination of E5, I5, E6, I6, E1, and I1)
•
•
★
•
•
(18)
Shipboard Approvals
Standard
SBS
Standard
American Bureau of Shipping
www.rosemount.com
★
47
Rosemount 3051S Series
January 2013
Table 6. Rosemount 3051SFP Integral Orifice Flowmeter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Sensor Fill Fluid and O-ring Options
D
1-7
Standard
Standard
L1
Inert Sensor Fill Fluid
•
•
★
L2
Graphite-filled (PTFE) O-ring
•
•
★
LA
Inert sensor fill fluid and graphite-filled (PTFE) O-ring
•
•
★
Digital Display(19)
Standard
Standard
M5
PlantWeb LCD display (Requires PlantWeb housing)
•
•
★
M7(16)(20)(21)
Remote mount LCD display and interface, PlantWeb housing, no cable, SST bracket
•
—
★
M8(16)(21)
Remote mount LCD display and interface, PlantWeb housing, 50 ft. (15 m) cable, SST bracket
•
—
★
M9(16)(21)
Remote mount LCD display and interface, PlantWeb housing, 100 ft. (31 m) cable, SST bracket
•
—
★
•
•
•
—
Transient Protection
Standard
T1(22)
Standard
Transient terminal block
★
PlantWeb Control Functionality
Standard
A01
Standard
FOUNDATION fieldbus Advanced Control Function Block Suite
★
PlantWeb Diagnostic Functionality
Standard
Standard
D01
FOUNDATION fieldbus Diagnostics Suite
•
—
★
DA2(23)
Advanced HART Diagnostics Suite
•
—
★
•
—
—
•
PlantWeb Enhanced Measurement Functionality
Standard
H01(24)
Standard
FOUNDATION fieldbus Fully Compensated Mass Flow Block
★
Cold Temperature
Standard
BRR
Standard
-60 °F (-51 °C) Cold Temperature Start-up
★
Alarm Limit(16)(17)
Standard
Standard
C4
NAMUR Alarm & Saturation Levels, High Alarm
•
•
★
C5
NAMUR Alarm & Saturation Levels, Low Alarm
•
•
★
C6
Custom Alarm & Saturation Levels, High Alarm
•
•
★
C7
Custom Alarm & Saturation Levels, Low Alarm
•
•
★
C8
Low Alarm (Standard Rosemount Alarm & Saturation Levels)
•
•
★
Hardware Adjustments and Ground Screw
Standard
Standard
D1(16)(17)(25)
Hardware Adjustments (zero, span, alarm, security)
•
—
★
D4(26)
External ground screw assembly
•
•
★
DA(16)(17)(25)
Hardware adjustments (zero, span, alarm, security) & External Ground Screw Assembly
•
—
★
M12, 4-pin, Male Connector (eurofast®)
•
•
A size Mini, 4-pin, Male Connector (minifast®)
•
•
Conduit Plug
DO
316 SST Conduit Plug
Conduit Electrical Connector
Expanded
GE (27)
GM
(27)
Typical Model Number:
3051SFP
1
S
010
W3
S
0150
D3
1
J
A
1A 3
M5
(1) To improve pipe perpendicularity for gasket sealing, socket diameter is smaller than standard pipe O.D.
48
www.rosemount.com
January 2013
Rosemount 3051S Series
(2) Required for Measurement Type codes 3, 4, 7, and D.
(3) For Measurement Type codes 1, 2, 5, and 6 with DP range 1, absolute limits are 0.5 to 2000 psi (0,03 to 137,9 bar) and gage limits are
-14.2 to 2000 psig (-0,98 to 137,9 bar).
(4) Only intrinsically safe approval codes apply.
(5) Only available with output code X.
(6) Only available with output code A.
(7) For detailed specifications see “Specifications” on page 79.
(8) Only available with differential pressure ranges 2 and 3, and silicone fill fluid.
(9) Long-life Power Module must be shipped separately, order Power Module 701PBKKF.
(10) Not available with 11/2-in. (38 mm) line size.
(11) Thermowell material is the same as the body material.
(12) Does not apply to Process Connection codes T1 and S1.
(13) Not available for bore sizes 0010, 0014, 0020, or 0034.
(14) Not available with DIN Process Connection codes D1, D2, or D3.
(15) Materials of Construction comply with metallurgical requirements within NACE MR0175/ISO for sour oil field production environments. Environmental limits apply to
certain materials. Consult latest standard for details. Selected materials also conform to NACE MR0103 for sour refining environments.
(16) Not available with output code X.
(17) Not available with output code F.
(18) Not available with M20 or G ½ conduit entry size.
(19) Not available with housing code 7J.
(20) See the 3051S Reference Manual (document number 00809-0100-4801) for cable requirements. Contact an Emerson Process Management representative for
additional information.
(21) Not available with output code F, option code DA2, or option code QT.
(22) Not available with Housing code 5A, 5J, or 7J. The T1 option is not needed with FISCO Product Certifications, transient protection is included with the FISCO Product
Certification code IA.
(23) Includes Hardware Adjustments (option code D1) as standard. Not available with output code X.
(24) Requires Rosemount Engineering Assistant version 5.5.1 to configure.
(25) Not available with housing codes 2E, 2F, 2G, 2M, 5A, 5J, or 7J.
(26) This assembly is included with certification options E1, N1, K1, ND, E4, E7, N7, K7, E2, E3, KA, KC, and KD.
(27) Not available with Housing code 5A, 5J, or 7J. Available with Intrinsically Safe approvals only. For FM Intrinsically Safe, Division 2 (option code I5) or
FM FISCO Intrinsically Safe (option code IE), install in accordance with Rosemount drawing 03151-1009.
www.rosemount.com
49
Rosemount 3051S Series
January 2013
Rosemount 3051S Electronic Remote Sensor System
The 3051S ERS™ System is a flexible, 2-wire 4-20 mA HART architecture that
calculates differential pressure (DP) electronically using two pressure sensors
that are linked together with a non-proprietary electrical wire.
Ideal applications for the 3051S ERS System include tall vessels and distillation
columns that have traditionally required long lengths of capillary or impulse
piping. When used in these types of applications, the 3051S ERS System can
deliver:
1
Secondary
3051SAM

More accurate and repeatable DP measurements

Faster time response

Simplified installations

Reduced maintenance
How to Order
2
Coplanar
In-Line
1.
Choose two 3051S ERS transmitter models. These may be any combination of
3051SAM and 3051SAL models.
2.
Decide which model will be the ERS Primary (4-20 mA loop termination and optional
LCD) and which will be the ERS Secondary. This will be specified by the
“Configuration Type” code in each model number.
3.
Specify two full model numbers per the desired configuration.
3051SAL
Primary
Coplanar
3
In-Line
3051SAL1PG4AA1A1020DFF71DA00M5
3051SAM1ST2A2E11A2A
Additional Information
Specifications: page 79
Certifications: page 108
Dimensional Drawings: page 111
Rosemount 3051SAM ERS™ Measurement Transmitter

Coplanar and In-Line sensor module platforms

Variety of process connections including threaded NPT, flanges, manifolds, and 1199 remote seals

Available with 10-year stability and limited 12-year warranty
Table 7. Rosemount 3051SAM Scalable ERS Measurement Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Model
Transmitter Type
3051SAM
Scalable ERS Measurement Transmitter
Performance Class(1)
Standard
1
2
Ultra: 0.025% span accuracy, 200:1 rangedown, 10-year stability, 12-year limited warranty
Classic: 0.035% span accuracy, 150:1 rangedown, 5-year stability
Standard
★
★
Configuration Type
Standard
P
S
50
Electronic Remote Sensor - Primary
Electronic Remote Sensor - Secondary
Standard
★
★
www.rosemount.com
January 2013
Rosemount 3051S Series
Table 7. Rosemount 3051SAM Scalable ERS Measurement Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Pressure Module Type
Standard
G
T
E
Expanded
A
Pressure Sensor Type
Coplanar
In-Line
In-Line
Gage
Gage
Absolute
Coplanar
Absolute
Standard
★
★
★
Pressure Range(2)
Coplanar Gage
In-Line Gage
In-Line Absolute
Coplanar Absolute
-14.7 to 30 psig
(-1,0 to 2,06 bar)
-14.7 to 150 psig
(-1,0 to 10,34 bar)
-14.7 to 800 psig
(-1,0 to 55,2 bar)
-14.7 to 4000 psig
(-1,0 to 275,8 bar)
-14.7 to 10000 psig
(-1,0 to 689,5 bar)
0 to 30 psia
(0 to 2,06 bar)
0 to 150 psia
(0 to 10,34 bar)
0 to 800 psia
(0 to 55,2 bar)
0 to 4000 psia
(0 to 275,8 bar)
0 to 10000 psia
(0 to 689,5 bar)
0 to 30 psia
(0 to 2,06 bar)
0 to 150 psia
(0 to 10,34 bar)
0 to 800 psia
(0 to 55,2 bar)
0 to 4000 psia
(0 to 275,8 bar)
★
N/A
★
Standard
1A
Standard
N/A
-250 to 250 inH2O
(-623 to 623 mbar)
-393 to 1000 inH2O
(-0,98 to 2,49 bar)
-14.2 to 300 psig
(-0,98 to 20,7 bar)
-14.2 to 2000 psig
(-0,98 to 137,9 bar)
2A
3A
4A
5A
★
★
★
Isolating Diaphragm
Standard
Standard
2(3)
316L SST
★
3(3)
Expanded
4(4)
5(4)(5)
6(4)
7(4)
Alloy C-276
★
Alloy 400
Tantalum
Gold-plated Alloy 400 (includes Graphite-Filled PTFE O-Ring)
Gold-plated 316L SST
Process Connection
Standard
000
A11(6)
A12(6)
B11(6)(7)
E11
E12
E13(3)
E14
E15(3)
E16(3)
E21
E22
E23(3)
E24
(3)
E25
Coplanar Module Type
In-Line Module Type
None
Assemble to Rosemount 305 Manifold
Assemble to Rosemount 304 or AMF Manifold with SST
Traditional Flange
Assemble to One Rosemount 1199 Remote Diaphragm Seal
with SST transmitter flange
Coplanar Flange (CS), ¼-18 NPT, 316 SST Drain Vents
Coplanar Flange (SST), ¼-18 NPT, 316 SST Drain Vents
Coplanar Flange (Cast C-276), ¼-18 NPT, Alloy C-276 Drain
Vents
Coplanar Flange (Cast Alloy 400), ¼-18 NPT, Alloy 400/K-500
Drain Vents
Coplanar Flange (SST), ¼-18 NPT, Alloy C-276 Drain Vents
Coplanar Flange (CS), ¼-18 NPT, Alloy C-276 Drain Vents
Coplanar Flange (CS), RC ¼, 316 SST Drain Vents
Coplanar Flange (SST), RC ¼, 316 SST Drain Vents
Coplanar Flange (Cast C-276), RC ¼, Alloy C-276 Drain Vents
Coplanar Flange (Cast Alloy 400), RC ¼, alloy 400/K-500
Drain Vents
Coplanar Flange (SST), RC ¼, Alloy C-276 Drain Vents
N/A
Assemble to Rosemount 306 Manifold
Assemble AMF Manifold to ½-14 NPT Female Process
Connection
Assemble to One Rosemount 1199 Remote
Diaphragm
½ -14 NPT Female
N/A
www.rosemount.com
Standard
★
★
★
★
★
★
N/A
★
N/A
★
N/A
N/A
N/A
N/A
N/A
★
★
★
★
★
N/A
★
N/A
★
51
Rosemount 3051S Series
January 2013
Table 7. Rosemount 3051SAM Scalable ERS Measurement Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Standard
E26(3)
F12
F13(3)
F14
F15(3)
F22
F23(3)
F24
F25(3)
F52
G11
G12
G21
G22
G31
G41
Expanded
F11
F32
F42
F62
F72
Coplanar Flange (CS), RC ¼, Alloy C-276 Drain Vents
Traditional Flange (SST), 1/4-18 NPT, 316 SST Drain Vents
Traditional Flange (Cast C-276), 1/4-18 NPT, Alloy C-276 Drain
Vents
Traditional Flange (Cast Alloy 400), 1/4-18 NPT, Alloy
400/K-500 Drain Vents
Traditional Flange (SST), 1/4-18 NPT, Alloy C-276 Drain Vents
Traditional Flange (SST), RC ¼, 316 SST Drain Vents
Traditional Flange (Cast C-276), RC ¼, Alloy C-276 Drain
Vents
Traditional Flange (Cast Alloy 400), RC ¼, Alloy 400/K500
Drain Vents
Traditional Flange (SST), RC ¼, Alloy C-276 Drain Vents
DIN-Compliant Traditional Flange (SST), ¼-18 NPT, 316 Drain
Vents, 7-16-in. Bolting
Vertical Mount Level Flange (SST), 2-in ANSI Class 150, 316
SST Drain Vents
Vertical Mount Level Flange (SST), 2-in ANSI Class 300, 316
SST Drain Vents
Vertical Mount Level Flange (SST), 3-in ANSI Class 150, 316
SST Drain Vents
Vertical Mount Level Flange (SST), 3-in ANSI Class 300, 316
SST Drain Vents
Vertical Mount Level Flange (SST), DIN-DN 50 PN 40, 316 SST
Drain Vents
Vertical Mount Level Flange (SST), DIN-DN 80 PN 40, 316 SST
Drain Vents
N/A
N/A
Standard
★
★
N/A
★
N/A
★
N/A
N/A
★
★
N/A
★
N/A
★
N/A
★
N/A
★
G1/2 A DIN 16288 male (Range 1-4 only)
★
N/A
★
N/A
★
N/A
★
N/A
★
N/A
★
Traditional Flange (CS), ¼-18 NPT, 316 SST Drain / Vents
Bottom Vent Traditional Flange (SST), ¼-18 NPT, 316 SST
Drain Vents
Bottom Vent Traditional Flange (SST), RC ¼, 316 SST Drain
Vents
DIN-Compliant Traditional Flange (316 SST), ¼-18 NPT, 316
Drain Vents, M10 Bolting
DIN-Compliant Traditional Flange (316 SST), ¼-18 NPT, 316
Drain Vents, M12 Bolting
Non-Threaded Instrument Flange (I-Flange)
N/A
N/A
N/A
N/A
Transmitter Output
Standard
A
Housing Style
Standard
Housings for ERS Primary - Configuration Type code P
1A
PlantWeb housing
1B
PlantWeb housing
1J
PlantWeb housing
1K
PlantWeb housing
2E
Junction Box with Remote Display Output
2F
Junction Box with Remote Display Output
2M
Junction Box with Remote Display Output
Standard
Housings for ERS Secondary - Configuration Type code S
2A
Junction Box
2B
Junction Box
2J
Junction Box
52
Standard
★
4–20 mA with digital signal based on HART protocol
Material
Conduit Entry Size
Standard
Aluminum
Aluminum
SST
SST
Aluminum
Aluminum
SST
1/2–14 NPT
Aluminum
Aluminum
SST
1
M20 x 1.5 (CM 20)
1
/2–14 NPT
M20 x 1.5 (CM 20)
1
/2–14 NPT
M20 x 1.5 (CM 20)
1/2–14 NPT
/2–14 NPT
M20 x 1.5 (CM 20)
1
/2–14 NPT
★
★
★
★
★
★
★
Standard
★
★
★
www.rosemount.com
January 2013
Rosemount 3051S Series
Table 7. Rosemount 3051SAM Scalable ERS Measurement Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Expanded
Housings for ERS Primary - Configuration Type code P
1C
PlantWeb housing
1L
PlantWeb housing
2G
Junction Box with Remote Display Output
Housings for ERS Secondary - Configuration Type code S
2C
Junction Box
Aluminum
SST
Aluminum
G1/2
G1/2
G1/2
Aluminum
G1/2
Options (Include with selected model number)
Electronic Remote Sensor Connection Cable
Standard
R05
R10
R15
50 ft. (15.2 m) Spool of Electronic Remote Sensor Cable
100 ft. (30.5 m) Spool of Electronic Remote Sensor Cable
150 ft. (45.7 m) Spool of Electronic Remote Sensor Cable
Standard
★
★
★
Mounting Bracket
Standard
B1(4)
B2(4)
B3(4)
B4
B7(4)
B8(4)
B9(4)
BA(4)
BC(4)
Traditional flange bracket, CS, 2-in. pipe
Traditional flange bracket, CS, panel
Traditional flange flat bracket, CS, 2-in. pipe
Bracket, all SST, 2-in. Pipe and Panel
Traditional flange bracket, B1 with SST bolts
Traditional flange bracket, B2 with SST bolts
Traditional flange bracket, B3 with SST bolts
Traditional flange bracket, B1, all SST
Traditional flange bracket, B3, all SST
Standard
★
★
★
★
★
★
★
★
★
Special Configuration (Software)
Standard
C1(8)
C3
C4(8)
C5(8)
C6(8)
C7(8)
C8(8)
Customer Software Configuration (“Configuration Data Sheet” Must Be Completed)
Gage Pressure Calibration on Rosemount 3051SAM_ _A4 only
NAMUR Alarm and Saturation Levels, High Alarm
NAMUR Alarm and Saturation Levels, Low Alarm
Custom Alarm and Saturation Levels, High Alarm (Requires C1 and Configuration Data Sheet)
Custom Alarm and Saturation Levels, Low Alarm (Requires C1 and Configuration Data Sheet)
Low alarm (standard Rosemount alarm and saturation levels)
Standard
★
★
★
★
★
★
★
Special Configuration (Hardware)
Standard
D2(9)
D4(10)
D5(9)
Expanded
D7(9)
D9(9)
1/2-14 NPT Flange Adapters
External ground screw assembly
Delete transmitter drain/vent valves (install plugs)
Standard
★
★
★
Coplanar flange without drain/vent ports
RC 1/2 Flange Adapters
Product Certifications
Standard
E1
I1
N1
K1
ND
E4
E5
ATEX Flameproof
ATEX Intrinsic Safety
ATEX Type n
ATEX Flameproof and Intrinsically Safe, Type n, Dust
ATEX Dust
TIIS Flameproof
FM Explosion-proof, Dust Ignition-proof
www.rosemount.com
Standard
★
★
★
★
★
★
★
53
Rosemount 3051S Series
January 2013
Table 7. Rosemount 3051SAM Scalable ERS Measurement Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Standard
I5
K5
E6(11)
I6
K6(11)
E7
I7
N7
K7
E2
I2
K2
E3
I3
KA(11)
KB(11)
KC
KD(11)
FM Intrinsically Safe, Division 2
FM Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2
CSA Explosion-proof, Dust Ignition-proof, Division 2
CSA Intrinsically Safe
CSA Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2
IECEx Flameproof
IECEx Intrinsic Safety
IECEx Type n
IECEx Flameproof, Intrinsic Safety, Type n
INMETRO Flameproof
INMETRO Intrinsically Safe
INMETRO Flameproof, Intrinsic Safety, Type n
China Flameproof
China Intrinsic Safety, Dust Ignition-proof
ATEX and CSA Flameproof, Intrinsically Safe, Division 2
FM and CSA Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2
FM and ATEX Explosion-proof, Intrinsically Safe, Division 2
FM, CSA, and ATEX Explosion-proof, Intrinsically Safe
Standard
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
Special Certifications
Calibration Certification
Standard
Q4
QP
Calibration certificate
Calibration Certificate and Tamper Evident Seal
Standard
★
★
Material Traceability Certification
Standard
Q8
Material Traceability Certification per EN 10204 3.1
Standard
★
Quality Certification for Safety
Standard
QS
Prior-use certificate of FMEDA Data
Standard
★
Toolkit Performance Reports
Standard
QZ(12)
Remote Seal System Performance Calculation Report
Standard
★
Terminal Blocks
Standard
T1(8)
Transient Terminal Block
Standard
★
Sensor Fill Fluid
Standard
L1(13)
Inert Sensor Fill Fluid
Standard
★
Graphite-Filled PTFE O-Ring
Standard
★
O-Ring
Standard
L2
Bolting Material
Standard
L4(9)
L5(3)(9)
L6(9)
L7(3)(9)
L8(9)
54
Austenitic 316 SST Bolts
ASTM A 193, Grade B7M Bolts
Alloy K-500 Bolts
ASTM A 453, Class D, Grade 660 Bolts
ASTM A 193, Class 2, Grade B8M Bolts
Standard
★
★
★
★
★
www.rosemount.com
January 2013
Rosemount 3051S Series
Table 7. Rosemount 3051SAM Scalable ERS Measurement Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Display Type (ERS Primary Only)
Standard
M5(8)
M7(8)(14)
M8(8)
M9(8)
PlantWeb LCD Display
Remote Mount LCD Display and Interface, PlantWeb housing, No Cable, SST Bracket
Remote Mount LCD Display and Interface, PlantWeb housing, 50 ft. (15.2 m) Cable, SST Bracket
Remote Mount LCD Display and Interface, PlantWeb housing, 100 ft. (30.5 m) Cable, SST Bracket
Standard
★
★
★
★
Special Procedures
Pressure Testing
Expanded
P1
Hydrostatic Testing with Certificate
Special Cleaning
Expanded
P2(9)
P3(9)
Cleaning for Special Services
Cleaning for Less than 1 PPM Chlorine/Fluorine
NACE Certificate
Standard
Q15(15)
Q25(15)
Certificate of Compliance to NACE MR0175/ISO 15156 for wetted materials
Certificate of Compliance to NACE MR0103 for wetted materials
Typical Model Number:
Standard
★
★
3051SAM 1 S T 2A 2 E11 A 2A
(1) For detailed specifications see “Specifications” on page 79.
(2) The pressure range should be specified based on the maximum static pressure, not differential pressure.
(3) Materials of Construction comply with metallurgical requirements highlighted within NACE MR 0175 / ISO 15156 for sour oil field production environments.
Environmental limits apply to certain materials. Consult latest standard for details. Selected materials also conform to NACE MR 0103 for sour refining
environments. Order with Q15 or Q25 to receive a NACE certificate.
(4) Not available with Pressure Sensor / Module codes T or E.
(5) Tantalum diaphragm material is only available with Pressure Sensor / Module code G.
(6) “Assemble to” items are specified separately and require a completed model number.
(7) Consult an Emerson Process Management representative for performance specifications.
(8) Not available with Configuration Type code S.
(9) Not available with Process Connection code A11.
(10) This assembly is included with certification options E1, N1, K1, ND, E4, E7, N7, K7, E2, KA, KC, and KD.
(11) Not available with M20 or G ½ conduit entry size.
(12) The QZ report quantifies the performance of the entire ERS system. One report is provided per ERS system. The QZ option is specified on the Primary Transmitter
(Configuration Type code P).
(13) Silicone fill fluid is standard.
(14) See the 3051S Reference Manual (document number 00809-0100-4801) for cable requirements. Contact an Emerson Process Management representative for
additional information.
(15) NACE compliant wetted materials are identified by footnote (2).
www.rosemount.com
55
Rosemount 3051S Series
January 2013
Rosemount 3051SAL ERS™ Level Transmitter

Integrated transmitter and direct mount seal in a single model number

Variety of process connections including flanged, threaded, and hygienic direct mount seals

Available with 10-year stability and limited 12-year warranty
A 3051SAL Scalable ERS Level Transmitter consists of 3 parts. First, specify the transmitter model codes found on page 56. Then,
specify a direct mount seal found on page 69. Finish the model number by specifying all desired options on page 59.
ERS Transmitter Model Codes_______page 56
Direct Mount Seal Model Codes_______page 69
ERS Options___________page 59
Table 8. Rosemount 3051SAL Scalable ERS™ Level Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Model
Transmitter Type
3051SAL
Scalable Level Transmitter
Performance Class(1)
Standard
Standard
1
Ultra: 0.055% span accuracy, 150:1 rangedown, 12-year limited warranty
★
2
Classic: 0.065% span accuracy, 150:1 rangedown
★
Configuration Type
Standard
Standard
P
Electronic Remote Sensor - Primary
★
S
Electronic Remote Sensor - Secondary
★
Pressure Module Type
Pressure Sensor Type
Standard
Standard
G
Coplanar
Gage
★
T
In-Line
Gage
★
E
In-Line
Absolute
★
Coplanar
Absolute
Expanded
A
Pressure Range
(6)
Coplanar Gage
In-Line Gage
In-Line Absolute
Coplanar
Absolute
1A
N/A
-14.7 to 30 psig
(-1,0 to 2,06 bar)
0 to 30 psia
(0 to 2,06 bar)
0 to 30 psia
(0 to 2,06 bar)
★
2A
-250 to 250 inH2O
(-623 to 623 mbar)
-14.7 to 150 psig
(-1,0 to 10,34 bar)
0 to 150 psia
(0 to 10,34 bar)
0 to 150 psia
(0 to 10,34 bar)
★
3A
-393 to 1000 inH2O
(-0,98 to 2,49 bar)
-14.7 to 800 psig
(-1,0 to 55,2 bar)
0 to 800 psia
(0 to 55,2 bar)
0 to 800 psia
(0 to 55,2 bar)
★
4A
-14.2 to 300 psig
(-0,98 to 20,7 bar)
-14.7 to 4000 psig
(-1,0 to 275,8 bar)
0 to 4000 psia
(0 to 275,8 bar)
0 to 4000 psia
(0 to 275,8 bar)
★
5A
-14.2 to 2000 psig
(-0,98 to 137,9 bar)
0 to 10000 psia
(0 to 689 bar)
N/A
★
Standard
56
Standard
-14.7 to 10000 psig
(-1,0 to 689,5 bar)
www.rosemount.com
January 2013
Rosemount 3051S Series
Table 8. Rosemount 3051SAL Scalable ERS™ Level Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Transmitter Output
Standard
A
Standard
★
4-20 mA with Digital Signal Based on HART Protocol
Housing Style
Material
Conduit Entry Size
Standard
Standard
Housings for ERS Primary - Configuration Type code P
1A
PlantWeb housing
Aluminum
1
★
1B
PlantWeb housing
Aluminum
M20 x 1.5 (CM 20)
★
1J
PlantWeb housing
SST
1/2–14 NPT
★
1K
PlantWeb housing
SST
M20 x 1.5 (CM 20)
★
2E
Junction Box with Remote Display Output
Aluminum
1/2–14 NPT
★
2F
Junction Box with Remote Display Output
Aluminum
M20 x 1.5 (CM 20)
★
2M
Junction Box with Remote Display Output
SST
1/2–14 NPT
★
/2–14 NPT
Housings for ERS Secondary - Configuration Type code S
2A
Junction Box
Aluminum
1
★
2B
Junction Box
Aluminum
M20 x 1.5 (CM 20)
★
SST
1/2–14 NPT
★
2J
Junction Box
/2–14 NPT
Expanded
Housings for ERS Primary - Configuration Type code P
1C
PlantWeb housing
Aluminum
G1/2
1L
PlantWeb housing
SST
G1/2
2G
Junction Box with Remote Display Output
Aluminum
G1/2
Aluminum
G1/2
Housings for ERS Secondary - Configuration Type code S
2C
Junction Box
Seal System Type
Standard
1
Standard
Direct-Mount Seal System
★
Direct-Mount Extension (Between Transmitter Flange and Seal)
Standard
Standard
0
No Extension
★
2
2-in. (50 mm) Extension
★
4
4-in. (100 mm) Extension
★
5
Thermal Optimizer
★
Transmitter Reference Pressure Connection
Standard
Standard
00
None (In-Line Style Sensor)
★
20
316L SST Isolator / SST Transmitter Flange
★
30
Alloy C-276 Isolator / SST Transmitter Flange
★
www.rosemount.com
57
Rosemount 3051S Series
January 2013
Table 8. Rosemount 3051SAL Scalable ERS™ Level Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Seal Fill Fluid
Temperature Limits(2)
Specific
Gravity at
No Extension
77 °F (25 °C)
2-in. (50 mm)
Extension
4-in. (100 mm)
Extension
Thermal
Optimizer
-102 to 293 °F
(-75 to 145 °C)
-102 to 293 °F
(-75 to 145 °C)
-102 to 293 °F
(-75 to 145 °C)
-102 to 293 °F
(-75 to 145 °C)
★
(3)
(3)
(3)
Standard
A
Standard
Syltherm XLT
0.85
C
Silicone 704
1.07
32 to 401 °F
(0 to 205 °C)
32 to 464 °F
(0 to 240 °C)
32 to 500 °F
(0 to 260 °C)
32 to 599 °F
(0 to 315 °C)
★
D
Silicone 200
0.93
-49 to 401 °F
(-45 to 205 °C)
-49 to 401 °F
(-45 to 205 °C)
-49 to 401 °F
(-45 to 205 °C)
-49 to 401 °F
(-45 to 205 °C)
★
H
Inert (Halocarbon)
1.85
-49 to 320 °F
(-45 to 160 °C)
-49 to 320 °F
(-45 to 160 °C)
-49 to 320 °F
(-45 to 160 °C)
-49 to 320 °F
(-45 to 160 °C)
★
G(4)(5)
Glycerin and Water
1.13
5 to 203 °F
(-15 to 95 °C)
5 to 203 °F
(-15 to 95 °C)
5 to 203 °F
(-15 to 95 °C)
5 to 203 °F
(-15 to 95 °C)
★
N(4)
Neobee M-20
0.92
5 to 401 °F(3)
(-15 to 205 °C)
5 to 437 °F
(-15 to 225 °C)
5 to 437 °F
(-15 to 225 °C)
5 to 437 °F
(-15 to 225 °C)
★
P(4)(5)
Propylene Glycol and Water
1.02
5 to 203 °F
(-15 to 95 °C)
5 to 203 °F
(-15 to 95 °C)
5 to 203 °F
(-15 to 95 °C)
5 to 203 °F
(-15 to 95 °C)
★
Continue specifying a completed model number by choosing a remote seal type below:
page 69
FF Flush Flanged Seal
Process Connections:
2 in. / DN 50 / 50A
3 in. / DN 80 / 80A
4 in. / DN 100 / 100A
page 71
EF Extended Flanged Seal
Process Connections:
3 in. / DN 80 / 80A
4 in. / DN 100 / 100A
RF Remote Flanged Seal
Process Connections:
1 in. / DN 25 / 25A
1.5 in. / DN 40 / 40A
RT Remote Threaded Seal
Process Connections:
¼ - 18 NPT
½ - 14 NPT
¾ - 14 NPT
1 – 11.5 NPT
SC Hygienic Tri-Clamp Seal
Process Connections:
1.5 in.
2 in.
3 in.
SS Hygienic Tank Spud Seal
Process Connections:
4 in.
page 72
page 74
page 76
page 77
58
www.rosemount.com
January 2013
Rosemount 3051S Series
Table 8. Rosemount 3051SAL Scalable ERS™ Level Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Options (Include with selected model number)(2)(3) (4) (5)
Electronic Remote Sensor Connection Cable
Standard(6)
Standard
R05
50 ft. (15.2 m) Spool of Electronic Remote Sensor Cable
★
R10
100 ft. (30.5 m) Spool of Electronic Remote Sensor Cable
★
R15
150 ft. (45.7 m) Spool of Electronic Remote Sensor Cable
★
Software Configuration
Standard
(7)
C1
Standard
Custom Software Configuration (Requires Configuration Data Sheet)
★
Gage Pressure Calibration
Standard
C3
Standard
Gage Pressure Calibration on Rosemount 3051SAL_ _A4 only
★
Alarm Limit
Standard
(7)
Standard
C4
NAMUR Alarm and Saturation Levels, High Alarm
★
C5(7)
NAMUR Alarm and Saturation Levels, Low Alarm
★
C6(7)
Custom Alarm and Saturation Levels, High Alarm (Requires C1 and Configuration Data Sheet)
★
C7(7)
Custom Alarm and Saturation Levels, Low Alarm (Requires C1 and Configuration Data Sheet)
★
C8(7)
Low Alarm (Standard Rosemount Alarm and Saturation Levels)
★
Ground Screw
Standard
(8)
D4
Standard
External Ground Screw Assembly
★
Conduit Plug
Standard
DO
Standard
316 SST Conduit Plug
★
Product Certifications
Standard
Standard
E1
ATEX Flameproof
★
I1
ATEX Intrinsic Safety
★
N1
ATEX Type n
★
K1
ATEX Flameproof and Intrinsically Safe, Type n, Dust
★
ND
ATEX Dust
★
E4
TIIS Flameproof
★
E5
FM Explosion-proof, Dust Ignition-proof
★
I5
FM Intrinsically Safe, Division 2
★
K5
FM Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2
★
E6(9)
CSA Explosion-proof, Dust Ignition-proof, Division 2
★
I6
CSA Intrinsically Safe
★
K6(9)
CSA Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2
★
E7
IECEx Flameproof
★
I7
IECEx Intrinsic Safety
★
N7
IECEx Type n
★
K7
IECEx Flameproof, Intrinsic Safety, Type n
★
www.rosemount.com
59
Rosemount 3051S Series
January 2013
Table 8. Rosemount 3051SAL Scalable ERS™ Level Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Standard
Standard
E2
INMETRO Flameproof
★
I2
INMETRO Intrinsically Safe
★
K2
INMETRO Flameproof, Intrinsic Safety
★
(9)
ATEX and CSA Flameproof, Intrinsically Safe, Division 2
★
KB(9)
FM and CSA Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2
★
KC
FM and ATEX Explosion-proof, Intrinsically Safe, Division 2
★
FM, CSA, and ATEX Explosion-proof, Intrinsically Safe
★
KA
KD
(9)
Sensor Fill Fluid
Standard
L1(10)
Standard
Inert Sensor Fill Fluid
★
O-Ring
Standard
L2
Standard
Graphite-filled PTFE o-ring
★
Bolting Material
Standard
Standard
L4
Austenitic 316 SST Bolts
★
L5
ASTM A 193, Grade B7M Bolts
★
L6
Alloy K-500 Bolts
★
L7(11)
ASTM A 453, Class D, Grade 660 Bolts
★
L8
ASTM A 193, Class 2, Grade B8M Bolts
★
Display Type (ERS Primary Only)
Standard
M5(7)
(7)(12)
Standard
PlantWeb LCD Display
★
Remote Mount LCD Display and Interface, PlantWeb housing, No Cable, SST Bracket
★
M8(7)
Remote Mount LCD Display and Interface, PlantWeb housing, 50 ft. (15.2 m) Cable, SST Bracket
★
M9(7)
Remote Mount LCD Display and Interface, PlantWeb housing, 100 ft. (30.5 m) Cable, SST Bracket
★
M7
Special Procedures
Pressure Testing
Expanded
P1
Hydrostatic Testing with Certificate
Special Cleaning
Expanded
P2
Cleaning for Special Services
P3
Cleaning for Less than 1 PPM Chlorine/Fluorine
Special Certifications
Calibration Certification
Standard
Standard
Q4
Calibration Certificate
★
QP
Calibration certificate with tamper evident seal
★
Material Traceability Certification
Standard
Q8
60
Standard
Material traceability certification per EN 10204 3.1
★
www.rosemount.com
January 2013
Rosemount 3051S Series
Table 8. Rosemount 3051SAL Scalable ERS™ Level Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Quality Certification for Safety
Standard
QS
Standard
★
Prior-use certificate of FMEDA Data
Toolkit Performance Reports
Standard
QZ
(13)
Standard
★
Remote Seal System Performance Calculation Report
Transient Protection
Standard
T1(7)
Standard
★
Transient Terminal Block
NACE Certificate
Standard
Standard
Q15(14)
Certificate of Compliance to NACE MR0175/ISO 15156 for wetted materials
★
Q25(14)
Certificate of Compliance to NACE MR0103 for wetted materials
★
Typical Model Number:
3051SAL 1 P G 4A A 1A 1 0 20 D FF 7 1 DA 0 0 M5
(1) For detailed specifications see “Specifications” on page 79.
(2) At ambient pressure of 14.7 psia (1 bar-a) and ambient temperature of 70°F (21°C). Temperature limits are reduced in vacuum service and may be limited by seal
selection.
(3) Maximum process temperature is limited by heat transfer to the transmitter electronics and must be further derated if ambient temperature exceeds 70 °F (21 °C).
(4) This is a food grade fill fluid.
(5) Not suitable for vacuum applications.
(6) The pressure range should be specified based on the maximum static pressure, not differential pressure.
(7) Not available with Configuration Type code S.
(8) This assembly is included with certification options E1, N1, K1, ND, E4, E7, N7, K7, E2, KA, KC, and KD.
(9) Not available with M20 or G ½ conduit entry size.
(10) Silicone fill fluid is standard.
(11) Bolts are not considered process wetted. In instances where NACE MR0175/ISO 15156 and NACE MR0103 conformance is required for bolting, L7 is the
recommended bolting option.
(12) See the 3051S Reference Manual (document number 00809-0100-4801) for cable requirements. Contact an Emerson Process Management representative for
additional information.
(13) The QZ report quantifies the performance of the entire ERS system. One report is provided per ERS system. The QZ option is specified on the Primary Transmitter
(Configuration Type code P).
(14) Materials of construction comply with metallurgical requirements highlighted within NACE MR 0175 / ISO 15156 for sour oil field production environments.
Environmental limits apply to certain materials. Consult latest standard for details. Selected materials also conform to NACE MR 0103 for sour refining
environments.
www.rosemount.com
61
Rosemount 3051S Series
January 2013
Rosemount 3051S Level Transmitter
3051SAL In-Line with
“FF” Flanged Seal
Rosemount 3051S Level Transmitters combine the features and benefits of a
high-performance 3051S pressure transmitter with the durability and reliability of a
direct mount seal all in a single model number.
Level transmitters can also be ordered with an additional 1199 Remote Mount Seal to
form a Tuned-System Assembly that offers improved performance and reduced costs
compared to traditional symmetrical (balanced) assemblies.
3051SAL Coplanar with
“SS” Hygienic Tank Spud
Seal
Tuned-System Assembly
Comprised of 3051SAL
with
1199 Flanged Seal
Product features and capabilities include:

Variety of process connections including flanged, threaded, and hygienic seals

Quantified performance for the entire transmitter / seal assembly (QZ option)

HART, FOUNDATION fieldbus, and Wireless protocols
Additional Information
Specifications: page 79
Dimensional Drawings: page 111
Rosemount 3051SAL Scalable Level Transmitter
A 3051SAL Scalable Level Transmitter consists of 3 parts. First, specify the transmitter model codes found on page 62.
Then, specify a direct mount seal found on page 69. Finish the model number by specifying all desired options on page 65.
Transmitter Model Codes_.................._ page 62
Direct Mount Seal Model Codes_........._page 69
Transmitter Options......... page 59
Table 9. Rosemount 3051SAL Scalable Level Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Model
Transmitter Type
3051SAL
Scalable Level Transmitter
Performance Class(1)
Standard
Standard
1
Ultra: 0.055% span accuracy, 150:1 rangedown, 12-year limited warranty
★
2
Classic: 0.065% span accuracy, 150:1 rangedown
★
Configuration Type
Standard
C
Standard
★
Liquid Level Transmitter
Pressure Module Type
Pressure Sensor Type
Standard
Standard
D
Coplanar
Differential
★
G
Coplanar
Gage
★
T
In-Line
Gage
★
E
In-Line
Absolute
★
Coplanar
Absolute
Expanded
A
62
www.rosemount.com
January 2013
Rosemount 3051S Series
Table 9. Rosemount 3051SAL Scalable Level Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Pressure Range
Coplanar DP
Coplanar Gage
In-Line Gage
In-Line Absolute
Coplanar Absolute
0 to 30 psia
(0 to 2,06 bar)
0 to 30 psia
(0 to 2,06 bar)
★
Standard
Standard
1A
N/A
N/A
-14.7 to 30 psig
(-1,0 to 2,06 bar)
2A
-250 to 250 inH2O
(-623 to 623 mbar)
-250 to 250 inH2O
(-623 to 623 mbar)
-14.7 to 150 psig
(-1,0 to 10,3 bar)
0 to 150 psia
(0 to 10,34 bar)
0 to 150 psia
(0 to 10,34 bar)
★
3A
-1000 to 1000 inH2O
(-2,5 to 2,5 bar)
-393 to 1000 inH2O
(-0,98 to 2,5 bar)
-14.7 to 800 psig
(-1,0 to 55,2 bar)
0 to 800 psia
(0 to 55,2 bar)
0 to 800 psia
(0 to 55,2 bar)
★
4A
-300 to 300 psi
(-20,7 to 20,7 bar)
-14.2 to 300 psig
(-0,98 to 20,7 bar)
-14.7 to 4000 psig
(-1,0 to 275,8 bar)
0 to 4000 psia
(0 to 275,8 bar)
0 to 4000 psia
(0 to 275,8 bar)
★
5A
-2000 to 2000 psi
(-137,9 to 137,9 bar)
-14.2 to 2000 psig
(-0,98 to 137,9 bar)
-14.7 to 10000 psig
(-1,0 to 689 bar)
0 to 10000 psia
(0 to 689 bar)
N/A
★
Transmitter Output
Standard
Standard
A
4-20 mA with digital signal based on HART protocol
★
F(2)
FOUNDATION fieldbus protocol
★
X(3)
Wireless (Requires wireless options and wireless PlantWeb housing)
★
Housing Style
Material
Conduit Entry
Standard
Standard
1A
PlantWeb housing
Aluminum
1
★
1B
PlantWeb housing
Aluminum
M20 x 1.5
★
1J
PlantWeb housing
SST
1/2–14 NPT
★
1K
PlantWeb housing
SST
M20 x 1.5
★
2A
Junction Box housing
Aluminum
1/2–14 NPT
★
2B
Junction Box housing
Aluminum
M20 x 1.5
★
2E
Junction Box with output for remote interface
Aluminum
1
★
2F
Junction Box with output for remote interface
Aluminum
M20 x 1.5
★
2J
Junction Box housing
SST
1/2–14 NPT
★
Wireless PlantWeb housing
Aluminum
1
★
Wireless PlantWeb housing
SST
Quick Connect (A size Mini, 4-pin male
termination)
SST
1C
PlantWeb housing
Aluminum
G1/2
1L
PlantWeb housing
316L SST
G1/2
2C
Junction Box housing
Aluminum
G1/2
2G
Junction Box with output for remote interface
Aluminum
G1/2
5A
(4)
5J(4)
(5)
7J
/2–14 NPT
/2–14 NPT
/2–14 NPT
1/2–14 NPT
★
★
Expanded
Direct-Mount Extension (Between Transmitter Flange and Seal)
Standard
Standard
10
No Extension
★
12
2-in. (50 mm) Extension
★
14
4-in. (100 mm) Extension
★
15
Thermal Optimizer
★
Transmitter Reference Pressure Connection
Standard
Standard
00
None (Inline Module Type Only)
★
10(6)
Tuned-System Assembly, One Capillary Remote Seal (Requires separate 1199 model number)
★
20
316 L SST Isolator with SST Transmitter Flange
★
30
Alloy C-276 Isolator with SST Transmitter Flange
★
www.rosemount.com
63
Rosemount 3051S Series
January 2013
Table 9. Rosemount 3051SAL Scalable Level Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Temperature Limits(7)
Specific Gravity at
77 °F (25 °C)
Seal Fill Fluid
No Extension
2-in. (50 mm)
Extension
4-in. (100 mm)
Extension
Thermal
Optimizer
-102 to 293 °F
(-75 to 145 °C)
102 to 293 °F
(-75 to 145 °C)
102 to 293 °F
(-75 to 145 °C)
★
Standard
Standard
A
Syltherm XLT
0.85
-102 to 293 °F
(-75 to 145 °C)
C
Silicone 704
1.07
32 to 401 °F
(0 to 205 °C)(8)
32 to 464 °F
(0 to 240 °C)(8)
32 to 500 °F
(0 to 260 °C)(8)
32 to 599 °F
(0 to 315 °C)
★
D
Silicone 200
0.93
-49 to 401 °F
(-45 to 205 °C)
-49 to 401 °F
(-45 to 205 °C)
-49 to 401 °F
(-45 to 205 °C)
-49 to 401 °F
(-45 to 205 °C)
★
H
Inert (Halocarbon)
1.85
-49 to 320 °F
(-45 to 160 °C)
-49 to 320 °F
(-45 to 160 °C)
-49 to 320 °F
(-45 to 160 °C)
-49 to 320 °F
(-45 to 160 °C)
★
G(9)(10)
Glycerine and Water
1.13
5 to 203 °F
(-15 to 95 °C)
5 to 203 °F
(-15 to 95 °C)
5 to 203 °F
(-15 to 95 °C)
5 to 203 °F
(-15 to 95 °C)
★
N(9)
Neobee M-20
0.92
5 to 401 °F
(-15 to 205 °C)(8)
5 to 437 °F
(-15 to 225 °C)
5 to 437 °F
(-15 to 225 °C)
5 to 437 °F
(-15 to 225 °C)
★
P(9)(10)
Propylene Glycol and
Water
1.02
5 to 203 °F
(-15 to 95 °C)
5 to 203 °F
(-15 to 95 °C)
5 to 203 °F
(-15 to 95 °C)
5 to 203 °F
(-15 to 95 °C)
★
Continue specifying a completed model number by choosing a remote seal type below:
page 69
FF Flush Flanged Seal
64
Process Connections:
2 in. / DN 50 / 50A
3 in. / DN 80 / 80A
4 in. / DN 100 / 100A
page 71
EF Extended Flanged Seal
Process Connections:
3 in. / DN 80 / 80A
4 in. / DN 100 / 100A
page 72
RF Remote Flanged Seal
Process Connections:
1 in. / DN 25 / 25A
1.5 in. / DN 40 / 40A
page 74
RT Remote Threaded Seal
Process Connections:
¼ - 18 NPT
½ - 14 NPT
¾ - 14 NPT
1 – 11.5 NPT
page 76
SC Hygienic Tri-Clamp Seal
Process Connections:
1.5 in.
2 in.
3 in.
page 77
SS Hygienic Tank Spud Seal
Process Connections:
4 in.
www.rosemount.com
January 2013
Rosemount 3051S Series
Table 9. Rosemount 3051SAL Scalable Level Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Wireless Options (Requires option code X and wireless PlantWeb housing)
Update Rate
Standard
Standard
WA
★
User Configurable Update Rate
Operating Frequency and Protocol
Standard
Standard
3
★
2.4 GHz DSSS, IEC 62591 (WirelessHART)
Omnidirectional Wireless Antenna
Standard
Standard
WK
External Antenna
★
WM
Extended Range, External Antenna
★
Expanded
WN
SmartPower
High-Gain, Remote Antenna
™
Standard
1(11)
Standard
★
Adapter for Black Power Module (I.S. Power Module Sold Separately)
Other Options (Include with selected model number)
PlantWeb Control Functionality
Standard
A01(12)(13)
Standard
★
FOUNDATION fieldbus Advanced Control Function Block Suite
Hardware Adjustments
Standard
Standard
D01(12)(13)
FOUNDATION fieldbus Diagnostics Suite
★
DA2(14)
Advanced HART Diagnostics Suite
★
Software Configuration
Standard
C1(15)
Standard
★
Custom software configuration (Requires Configuration Data Sheet)
Gage Pressure Calibration
Standard
C3
Standard
★
Gage pressure calibration on Rosemount 3051SAL_ _A4 only
Alarm Limit
Standard
Standard
C4(12)(15)
NAMUR alarm and saturation levels, high alarm
★
C5(12)(15)
NAMUR alarm and saturation levels, low alarm
★
C6(12)(15)
Custom alarm and saturation signal levels, high alarm (Requires C1 and Configuration Data Sheet)
★
C7(12)(15)
Custom alarm and saturation signal levels, low alarm (Requires C1 and Configuration Data Sheet)
★
C8(12)(15)
Low alarm (standard Rosemount alarm and saturation levels)
★
Hardware Adjustments
Standard
D1(12)(15)(16)
Standard
★
Hardware adjustments (zero, span, alarm, security)
Flange Adapter
Standard
D2
Standard
1/2-14 NPT flange adapter
★
Expanded
D9
RC 1/2 SST flange adapter
www.rosemount.com
65
Rosemount 3051S Series
January 2013
Table 9. Rosemount 3051SAL Scalable Level Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Ground Screw
Standard
D4(17)
Standard
★
External ground screw assembly
Drain/Vent Valve
Standard
D5
Standard
★
Delete transmitter drain/vent valves (install plugs)
Conduit Plug
Standard
DO(18)
Standard
★
316 SST Conduit Plug
Product Certifications(19)
Standard
Standard
E1
ATEX Flameproof
★
I1
ATEX Intrinsic Safety
★
IA
ATEX FISCO Intrinsic Safety (FOUNDATION fieldbus protocol only)
★
N1
ATEX Type n
★
K1
ATEX Flameproof, Intrinsic Safety, Type n, Dust
★
ND
ATEX Dust
★
E4
TIIS Flameproof
★
E5
FM Explosion-proof, Dust Ignition-proof
★
I5
FM Intrinsically Safe, Division 2
★
IE
FM FISCO Intrinsically Safe (FOUNDATION fieldbus protocol only)
★
K5
FM Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2
★
E6(20)
CSA Explosion-proof, Dust Ignition-proof, Division 2
★
I6
CSA Intrinsically Safe
★
IF
CSA FISCO Intrinsically Safe (FOUNDATION fieldbus protocol only)
★
K6(20)
CSA Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2
★
D3(21)
Measurement Canada Accuracy Approval
★
E7
IECEx Flameproof, Dust Ignition-proof
★
I7
IECEx Intrinsic Safety
★
IG
IECEx FISCO Intrinsic Safety (FOUNDATION fieldbus protocol only)
★
N7
IECEx Type n
★
K7
IECEx Flameproof, Dust Ignition-proof, Intrinsic Safety, Type n
★
E2
INMETRO Flameproof
★
I2
INMETRO Intrinsic Safety
★
IB
INMETRO FISCO Intrinsic Safety
★
K2
INMETRO Flameproof, Intrinsic Safety
★
E3
China Flameproof
★
I3
China Intrinsic Safety, Dust Ignition-proof
★
KA(20)
ATEX and CSA Flameproof, Intrinsically Safe, Division 2
★
KB(20)
FM and CSA Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2
★
KC
FM and ATEX Explosion-proof, Intrinsically Safe, Division 2
★
KD(20)
FM, CSA, and ATEX Explosion-proof, Intrinsically Safe
★
Sensor Fill Fluid
Standard
L1(22)
Standard
★
Inert sensor fill fluid
O-Ring
Standard
L2
66
Standard
★
Graphite-filled PTFE o-ring
www.rosemount.com
January 2013
Rosemount 3051S Series
Table 9. Rosemount 3051SAL Scalable Level Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Bolting Material
Standard
Standard
L4
Austenitic 316 SST bolts
★
L5
ASTM A193, Grade B7M bolts
★
L6
Alloy K-500 bolts
★
L7 (23)
ASTM A453, Class D, Grade 660 bolts
★
L8
ASTM A193, Class 2, Grade B8M bolts
★
Display Type(24)
Standard
Standard
M5(12)(25)(26)
PlantWeb LCD Display
★
M7(12)(25)
Remote mount LCD display and interface, PlantWeb housing, no cable, SST bracket
★
M8(12)(25)
Remote mount LCD display and interface, PlantWeb housing, 50 ft. (15 m) cable, SST bracket
★
M9(12)(25)
Remote mount LCD display and interface, PlantWeb housing, 100 ft. (31 m) cable, SST bracket
★
Pressure Testing
Expanded
P1
Hydrostatic testing with certificate
Special Cleaning
Expanded
P2
Cleaning for special services
P3
Cleaning for less than 1PPM Chlorine/Fluorine
Calibration Certification
Standard
Standard
Q4
Calibration certificate
★
QP
Calibration certificate and tamper evident seal
★
Material Traceability Certification
Standard
Q8
Standard
★
Material traceability certification per EN 10204 3.1
Quality Certification for Safety
Standard
Standard
QS(12)(15)
Prior-use certificate of FMEDA Data
★
QT(27)
Safety-certified to IEC 61508 with certificate of FMEDA data
★
Toolkit Performance Reports
Standard
QZ
Standard
★
Remote Seal System Performance Calculation Report
Transient Protection
Standard
T1(28)(29)
Standard
★
Transient terminal block
Conduit Electrical Connector
Standard
Standard
GE(30)
M12, 4-pin, Male Connector (eurofast®)
★
GM(30)
A size Mini, 4-pin, Male Connector (minifast®)
★
NACE Certificate
Standard
Standard
Q15(31)
Certificate of Compliance to NACE MR0175/ISO 15156 for wetted materials
★
Q25(31)
Certificate of Compliance to NACE MR0103 for wetted materials
★
Typical Model Number:
www.rosemount.com
3051SAL 1 C G 2A A 1A 10 20 D FF G 1 DA 0 0
67
Rosemount 3051S Series
January 2013
(1) For detailed specifications see “Specifications” on page 79.
(2) Requires PlantWeb housing.
(3) Only intrinsically safe approval codes apply.
(4) Only available with output code X.
(5) Available with output code A only. Available approvals are FM Intrinsically Safe, Division 2 (option code I5), CSA Intrinsically Safe (option code I6), ATEX Intrinsic Safety
(option code I1), or IECEx Intrinsic Safety (option code I7). Contact an Emerson Process Management representative for additional information.
(6) With option code 10, user must select Seal Location option code M in Table 7 of Rosemount DP Level PDS.
(7) At ambient pressure of 14.7 psia (1 bar-a) and ambient temperature of 70 °F (21°C).
(8) Maximum process temperature is limited by heat transfer to the transmitter.
(9) This is a food grade fill fluid.
(10) Not suitable for vacuum applications.
(11) Long-Life Power Module must be shipped separately, order Power Module 701PBKKF.
(12) Not available with output code X.
(13) Not available with output code A.
(14) Requires PlantWeb housing and Output code A. Includes Hardware Adjustments as standard.
(15) Not available with output code F.
(16) Not available with housing style codes 2E, 2F, 2G, 2M, 5A, 5J, or 7J.
(17) This assembly is included with certification options E1, N1, K1, ND, E4, E7, N7, K7, E2, E3, KA, KC, and KD.
(18) Transmitter is shipped with 316 SST conduit plug (uninstalled) in place of carbon steel conduit plug.
(19) Valid when SuperModule Platform and housing have equivalent approvals.
(20) Not available with M20 or G ½ conduit entry size.
(21) Requires PlantWeb housing and Hardware Adjustments option code D1. Limited availability depending on transmitter type and range. Contact an Emerson Process
Management representative for additional information.
(22) Silicone fill fluid is standard.
(23) Bolts are not considered as being process wetted. In instances where NACE MR0175/ISO 15156 and NACE MR0103 conformance is required for bolting, L7 is the
recommended bolting option.
(24) Not available with Housing code 7J.
(25) Not available with output code F, option code DA2, or option code QT.
(26) See the 3051S Reference Manual (document number 00809-0100-4801) for cable requirements. Contact an Emerson Process Management representative for additional
information.
(27) Not available with output code F or X. Not available with housing code 7J.
(28) Not available with Housing code 5A, 5J, or 7J.
(29) The T1 option is not needed with FISCO Product Certifications; transient protection is included in the FISCO product certification codes IA, IB, IE, IF, and IG.
(30) Not available with Housing code 5A, 5J, or 7J. Available with Intrinsically Safe approvals only. For FM Intrinsically Safe, Division 2 (option code I5) or FM FISCO Intrinsically
Safe (option code IE), install in accordance with Rosemount drawing 03151-1009.
(31) Materials of construction comply with metallurgical requirements highlighted within NACE MR 0175 / ISO 15156 for sour oil field production environments.
Environmental limits apply to certain materials. Consult latest standard for details. Selected materials also conform to NACE MR 0103 for sour refining environments.
68
www.rosemount.com
January 2013
Rosemount 3051S Series
Direct Mount Seals for 3051SAL
Flush Flanged (FF) Seal

Most common seal

Good for use in general applications

Easy installation on flanged connections ranging from 2-in. (DN 50) to 4-in. (DN 100)
Table 10. Flush Flanged (FF) Seal Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Model
Process Connection
FF
Flush Flanged Seal
Process Connection Size
Standard
G
7
J
9
Standard
★
★
★
★
2-in. / DN 50 / 50A
3-in. / 80A
DN 80
4-in. / DN 100 / 100A
Flange / Pressure Rating
Standard
1
2
4
G
Expanded
A
B
D
E
Standard
★
★
★
★
ANSI/ASME B16.5 Class 150
ANSI/ASME B16.5 Class 300
ANSI/ASME B16.5 Class 600
PN 40 per EN 1092-1
10K per JIS B2238
20K per JIS B2238
40K per JIS B2238
PN 10/16 per EN 1092-1, Available with DN 100 only
Materials of Construction
Standard
CA
DA
CB(1)
DB(1)
CC
DC
Isolating Diaphragm
Upper Housing
Flange
316L SST
316L SST
Alloy C-276
Alloy C-276
Tantalum
Tantalum
316L SST
316L SST
316L SST
316L SST
316L SST
316L SST
CS
316 SST
CS
316 SST
CS
316 SST
Standard
★
★
★
★
★
★
Flushing Connection Ring (Lower Housing)(2)
Standard
0
A
B
None
316 SST
Alloy C-276
Standard
★
★
★
Flushing Connection Quantity & Size
Standard
0
1
3
7
9
None
One 1/4-18 NPT Flushing Connection
Two 1/4-18 NPT Flushing Connections
One 1/2-14 NPT Flushing Connection
Two 1/2-14 NPT Flushing Connections
www.rosemount.com
Standard
★
★
★
★
★
69
Rosemount 3051S Series
January 2013
Table 10. Flush Flanged (FF) Seal Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Options (Include with selected model number)
Cold Temperature Remote Seal Applications
Expanded
SB
Extra Fill Fluid for Cold Temperature Applications
Remote Seal Diaphragm Thickness
Expanded
SC(3)
0.006-in. (150 μm) Diaphragm Thickness
Flushing Connection Ring Plugs
Standard
SD
SG
SH
Alloy C-276 Plug(s) for Flushing Connection(s)
SST Plug(s) for Flushing Connection(s)
SST Drain / Vent(s) for Flushing Connection(s)
Standard
★
★
★
Flushing Connection Ring Gaskets
Expanded
SJ
SK
SN
PTFE Gasket
Barium Sulfate-Filled PTFE Gasket
Grafoil Gasket
Additional Options
Remote Seal Diaphragm Coating
Expanded
SU(3)
SV(4)
0.001-in. ±0.0002-in. (25 μm ±5 μm) Gold Plated Diaphragm
PTFE Coated Diaphragm for Non-Stick Purposes
Complete the 3051SAL model number by specifying options as needed:
page 59
page 65
ERS Transmitter Options
Scalable Level Transmitter Options
(1) Not available with option code SC.
(2) Supplied with Thermo Tork TN9000 gasket.
(3) Not available with Tantalum diaphragms (Material of Construction codes CC and DC).
(4) Not available with transmitter option code Q8 (Material Traceability per EN 10204 3.1)
70
www.rosemount.com
January 2013
Rosemount 3051S Series
Extended Flanged (EF) Seal

Good for use in viscous applications with plugging issues

Seal diaphragm installed flush with inner tank wall to prevent process plugging

Easy installation on 3-in. (DN 80) and 4-in. (DN 100) flanged connections
Table 11. Extended Flanged (EF) Seal Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Model
Process Connection
EF
Extended Flanged Seal
Process Connection Size
Standard
7
9
Standard
★
★
3-in. / DN 80 / 80A
4-in. / DN 100 / 100A
Flange / Pressure Rating
Standard
1
2
4
G
Expanded
A
B
D
E
Standard
★
★
★
★
ANSI/ASME B16.5 Class 150
ANSI/ASME B16.5 Class 300
ANSI/ASME B16.5 Class 600
PN 40 per EN 1092-1
10K per JIS B2238
20K per JIS B2238
40K per JIS B2238
PN 10/16 per EN 1092-1, Available with DN 100 only
Materials of Construction
Standard
CA
DA
CB
DB
Isolating Diaphragm
Extension / Gasket Surface
Mounting Flange
316L SST
316L SST
Alloy C-276
Alloy C-276
316L SST
316L SST
Alloy C-276
Alloy C-276
CS
316 SST
CS
316 SST
Standard
★
★
★
★
Seal Extension Length
Standard
20
40
60
2-in. (50 mm)
4-in. (100 mm)
6-in. (150 mm)
Options (Include with selected model number)
Standard
★
★
★
Cold Temperature Remote Seal Applications
Standard
SB
Extra Fill Fluid for Cold Temperature Applications
Standard
★
Remote Seal Diaphragm Thickness
Expanded
SC
0.006-in. (150 μm) Diaphragm Thickness
Remote Seal Diaphragm Coating
Expanded
SU
SV(1)
0.001-in. ±0.0002-in. (25 μm ±5 μm) Gold Plated Diaphragm
PTFE Coated Diaphragm for Non-Stick Purposes
Complete the 3051SAL model number by specifying options as needed:
page 59
ERS Transmitter Options
page 65
Scalable Level Transmitter Options
(1) Not available with transmitter option code Q8 (Material Traceability per EN 10204 3.1)
www.rosemount.com
71
Rosemount 3051S Series
January 2013
Remote Flanged (RF) Seal

Designed to improve performance on smaller process connections

Easy installation on flanged connections ranging from 1-in. to 1.5-in. (DN 50 – DN 40)

Lower housing / flushing ring required
Table 12. Remote Flanged (RF) Seal Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Model
Process Connection
RF
Remote Flanged Seal
Process Connection Size
Standard
2
4
D
F
Standard
★
★
★
★
1-in. / 25A
1.5-in. / 40A
DN 25
DN 40
Flange / Pressure Rating
Standard
1
2
4
G
Expanded
A
B
D
Standard
★
★
★
★
ANSI/ASME B16.5 Class 150
ANSI/ASME B16.5 Class 300
ANSI/ASME B16.5 Class 600
PN 40 per EN 1092-1
10K per JIS B2238
20K per JIS B2238
40K per JIS B2238
Materials of Construction
Standard
CA
DA
CB
DB
CC
DC
Isolating Diaphragm
Upper Housing
Flange
316L SST
316L SST
Alloy C-276
Alloy C-276
Tantalum
Tantalum
316L SST
316L SST
316L SST
316L SST
316L SST
316L SST
CS
316 SST
CS
316 SST
CS
316 SST
Standard
★
★
★
★
★
★
Flushing Connection Ring Material (Lower Housing)(1)
Standard
A
B
D
316L SST
Alloy C-276
Plated CS
Standard
★
★
★
Number of Flushing Connections
Standard
1
3
5
72
One ¼-18 NPT Flushing Connection
Two ¼-18 NPT Flushing Connections
None
Standard
★
★
★
www.rosemount.com
January 2013
Rosemount 3051S Series
Table 12. Remote Flanged (RF) Seal Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Options (Include with selected model number)
Cold Temperature Remote Seal application
Standard
SB
Extra Fill Fluid for Cold Temperature Applications
Standard
★
Remote Seal Diaphragm Thickness
Expanded
SC(2)
0.006-in. (150 μm) Diaphragm Thickness
Remote Seal Flushing Connection Plug, Drain/Vent
Standard
SD
SG
SH
Alloy C-276 Plug(s) for Flushing Connection(s)
316 SST Plug(s) for Flushing Connection(s)
316 SST Drain / Vent(s) for Flushing Connection(s)
Standard
★
★
★
Remote Seal Gasket Material
Standard
SJ
Expanded
SK
SN
PTFE Gasket (for use with Flushing Connection Ring)
Standard
★
Barium Sulfate-Filled PTFE Gasket (for use with Flushing Connection Ring)
Grafoil Gasket (for use with Flushing Connection Ring)
Remote Seal Diaphragm Coating
Expanded
SU(2)
SV(3)
0.001-in. ±0.0002-in. (25 μm ±5 μm) Gold Plated Diaphragm
PTFE Coated Diaphragm for Non-Stick Purposes
Complete the 3051SAL model number by specifying options as needed:
page 59
page 65
ERS Transmitter Options
Scalable Level Transmitter Options
(1) Supplied with C4401 Aramid fiber gasket.
(2) Not available with Tantalum diaphragms (Material of Construction codes CC and DC).
(3) Not available with transmitter option code Q8 (Material Traceability per EN 10204 3.1)
www.rosemount.com
73
Rosemount 3051S Series
January 2013
Remote Threaded (RT) Seal

For use with threaded process connections (1/4-18 to 1-11.5 NPT)

Rated for use in high-pressure applications (up to 2500 PSI)

Optional flushing connections available
Table 13. RT Threaded Seal Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Process Connection Style
Standard
RT
Standard
★
Remote Threaded Seal
Process Connection Size
Standard
Standard
3
1/2-14 NPT
★
4
3/4-14 NPT
★
5
1-11.5 NPT
★
Expanded
1
1/4-18 NPT
Pressure Rating
Standard
0
Standard
★
2500 psi
Isolating Diaphragm Material
Upper Housing Material
Flange
Standard
Standard
CA
316L SST
316L SST
CS
★
DA
316L SST
316L SST
316 SST
★
CB
Alloy C-276
316L SST
CS
★
DB
Alloy C-276
316L SST
316 SST
★
CC
Tantalum
316L SST
CS
★
DC
Tantalum
316L SST
316 SST
★
Flushing Connection Ring Material (Lower Housing)(1) (2)
Standard
Standard
A
316L SST
★
B
Alloy C-276
★
Expanded
D
Plated CS
Number of Flushing Connections
Standard
Standard
1
One 1/4-in. Flushing Connection
★
3
Two 1/4-in. Flushing Connections
★
5
None
★
Options (Include with selected model number)
Cold Temperature Remote Seal application
Standard
SB
Standard
Extra Fill Fluid for Cold Temperature Applications
★
Remote Seal Diaphragm Thickness
Expanded
SC(3)
74
0.006-in. (150 μm) Diaphragm Thickness
www.rosemount.com
January 2013
Rosemount 3051S Series
Table 13. RT Threaded Seal Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Remote Seal Flushing Plug, Drain/Vent
Standard
Standard
SD
Alloy C-276 Plug(s) for Flushing Connection(s)
★
SG
316 SST Plug(s) for Flushing Connection(s)
★
SH
316 SST Drain / Vent(s) for Flushing Connection(s)
★
Remote Seal Gasket Material
Standard
Standard
SJ
PTFE Gasket (for use with Flushing Connection Ring)
★
SN
Grafoil Gasket (for use with Flushing Connection Ring)
★
SR
Ethylene Propylene Gasket (for use with Flushing Connection Ring)
★
Expanded
SK
Barium Sulfate-Filled PTFE Gasket (for use with Flushing Connection Ring)
Remote Seal Bolt
Standard
S3
Standard
304 SST Bolts
★
Expanded
S4
316 SST Bolts
Remote Seal Diaphragm Coating
Expanded
SU(3)
0.001-in. ±0.0002-in. (25 μm ±5 μm) Gold Plated Diaphragm
SV(4)
PTFE Coated Diaphragm for Non-Stick Purposes
Complete the 3051SAL model number by specifying options as needed:
page 59
page 65
ERS Transmitter Options
Scalable Level Transmitter Options
(1) Supplied with C4401 aramid fiber gasket.
(2) Flushing Connection Ring/ Lower Housing assembly bolts provided as standard are carbon steel.
(3) Not available with Tantalum diaphragms (Material of Construction codes CC and DC).
(4) Not available with transmitter option code Q8 (Material Traceability per EN 10204 3.1).
www.rosemount.com
75
Rosemount 3051S Series
January 2013
Hygienic Tri-Clamp (SC) Seal

Good for use in hygienic applications

Easy installation on Tri-Clover style Tri-Clamp® connections (1.5-in. to 3-in.)

Conforms to 3-A standard 74-03
Table 14. SC Hygienic Tri-Clover Style Tri-Clamp Seal Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Process Connection
Standard
SC(1)
Standard
★
Tri-Clover Style Tri-Clamp Seal
Process Connection Size
Standard
Standard
3(2)
1½ in.
★
5(2)
2 in.
★
7
3 in.
★
Maximum Working Pressure
Standard
0
Standard
★
1000 PSI
Isolating Diaphragm Material
Upper Housing Material
Standard
LA00
Standard
316L SST
316L SST
Alloy C-276
316L SST
★
Expanded
LB00
Options (Include with selected model number)
Remote Seal Diaphragm Polishing
Expanded
R6
Electropolishing
Remote Seal Diaphragm Surface Finish
Expanded
RD
10 in. (0.25 m) Ra Diaphragm Surface Finish
RG
15 in. (0.375 m) Ra Diaphragm Surface Finish
RH
20 in. (0.5 m) Ra Diaphragm Surface Finish
Surface Finish Certification
Standard
Q16
Standard
Surface Finish Certification for Hygienic Remote Seals
★
Complete the 3051SAL model number by specifying options as needed:
page 59
page 65
ERS Transmitter Options
Scalable Level Transmitter Options
(1) Clamp and gasket furnished by user. The maximum working pressure is dependent upon the clamp pressure rating.
(2) Consult factory for calibrated spans lower than 5 psi (345 mbar).
76
www.rosemount.com
January 2013
Rosemount 3051S Series
Hygienic Tank Spud (SS) Seal

Commonly used in hygienic level applications

Seal diaphragm installed flush with inner tank wall

Conforms to 3-A standard 74-03
Table 15. SS Hygienic Tank Spud Seal Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Process Connection
Standard
SS(1)
Standard
★
Hygienic Tank Spud Seal
Process Connection Size
Standard
A
Standard
★
4-in. Sch. 5 Tri-Clamp
Maximum Working Pressure (Clamp Rating)
Standard
0
Standard
★
600 PSI (41 bar)
Upper Housing
Standard
A
Standard
★
316L SST
Diaphragm and Wetted, Extension Material
Standard
AL
Expanded
BB
Diaphragm and Wetted
Extension
316L SST(2)
316L SST(2)
Alloy C-276
316L SST
Standard
★
Extension Length
Standard
2
6
2-in. (50 mm) Extension
6-in. (150 mm) Extension
Standard
★
★
Options (Include with selected model number)
Remote Seal Diaphragm Thickness
Expanded
SC
0.006-in. (150 m) Diaphragm Thickness
Tank Spud Included with Shipment
Standard
S1
Tank Spud Included with Shipment
Standard
★
Remote Seal Diaphragm Polishing
Expanded
R6
Electropolishing
Remote Seal Diaphragm Surface Finish
Expanded
RH
RG(3)
20 in. (0.5 m) Ra Diaphragm Surface Finish
15 in. (0.375 m) Ra Diaphragm Surface Finish
www.rosemount.com
77
Rosemount 3051S Series
January 2013
Table 15. SS Hygienic Tank Spud Seal Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Additional Options
Surface Finish Certification
Standard
Q16
Surface Finishing Certification for Hygienic Remote Seals
Standard
★
Complete the 3051SAL model number by specifying options as needed:
page 59
page 65
ERS Transmitter Options
Scalable Level Transmitter Options
(1) Clamp and Ethylene Propylene o-ring (conforms to 3-A standard 74 and USP class VI) supplied.
(2) Diaphragm brazed and TIG-welded to extension.
(3) Require Option code R6 (Electropolishing).
78
www.rosemount.com
January 2013
Rosemount 3051S Series
Specifications
Performance Specifications
Conformance to Specification (±3 (Sigma))
For zero-based spans, reference conditions, silicone oil fill, glass-filled
Technology leadership, advanced manufacturing techniques, and
statistical process control ensure pressure measurement specification
conformance to ±3or better.
PTFE o-rings, SST materials, Coplanar flange (3051SMV, 3051S_C) or
1
Reference Accuracy
equal range points.
Stated reference accuracy equations include terminal based linearity,
hysteresis, and repeatability.
For FOUNDATION fieldbus and wireless devices, use calibrated range in
place of span.
/2 in.- 14 NPT (3051S_T) process connections, digital trim values set to
Transmitter with Coplanar Sensor Module (Single Variable)
Differential Pressure (3051S_CD, 3051SMV_ _ 3 or 4)
Gage Pressure (3051S_CG, 3051SAM_ _G(1))
Ranges 2 - 4
Range 5
Range 1
Range 0
Ultra
Classic
±0.025% of span;
For spans less than 10:1,
±[0.005 + 0.0035(URL / Span)]% of span
±0.035% of span;
For spans less than 10:1,
±[0.015 + 0.005(URL / Span)]% of span
±0.05% of span;
For spans less than 10:1,
±[0.005 + 0.0045(URL / Span)]% of span
±0.09% of span;
For spans less than 15:1,
±[0.015 + 0.005(URL / Span)]% of span
±0.09% of span;
For spans less than 2:1,
±0.045% of URL
±0.065% of span;
For spans less than 10:1,
±[0.015 + 0.005(URL / Span)]% of span
±0.10% of span;
For spans less than 15:1,
±[0.025 + 0.005(URL / Span)]% of span
±0.10% of span;
For spans less than 2:1,
±0.05% of URL
Ultra for Flow(2)
±0.04% of reading up to 8:1 DP
turndown from URL;
±[0.04 + 0.0023(URL /
Reading)]% of reading to 200:1
DP turndown from URL
Not Available
Not Available
Not Available
Absolute Pressure (3051S_CA, 3051SAM_ _A(1))
Ranges 1 - 4
Range 0
Ultra
±0.025% of span;
For spans less than 10:1,
±[0.004(URL / Span)]% of span
±0.075% of span;
For spans less than 5:1,
±[0.025 + 0.01(URL / Span)]% of span
Classic
±0.035% of span;
For spans less than 10:1,
±[0.0065(URL / Span)]% of span
±0.075% of span;
For spans less than 5:1,
±[0.025 + 0.01(URL / Span)]% of span
(1) Specifications are for each gage / absolute pressure sensor of the ERS system and are not reflective of the DP calculation.
(2) Ultra for Flow is only available for 3051S_CD ranges 2-3. For calibrated spans from 1:1 to 2:1 of URL, add ±0.005% of span analog output error.
www.rosemount.com
79
Rosemount 3051S Series
January 2013
Transmitter with In-Line Sensor Module
Absolute Pressure (3051S_TA, 3051SAM_ _E(1))
Gage Pressure (3051S_TG, 3051SAM_ _T(1))
Ranges 1 - 4
Range 5:
Ultra
±0.025% of span
For spans less than 10:1,
±[0.004(URL / Span)]% of span
±0.04% of span. For spans less than 10:1
±0.004% of URL.
Classic
±0.035% of span
For spans less than 10:1,
±[0.0065(URL / Span)]% of span
±0.065% of span. For spans less than 10:1 ±0.0065% of URL.
(1) Specifications are for each gage / absolute pressure sensor of the ERS system and are not reflective of the DP calculation.
Transmitter with MultiVariable Sensor Module
Differential Pressure and Static Pressure (3051SMV_ _1 or 2)
DP Ranges 2-3
DP Range 4
DP Range 5
DP Range 1
AP & GP Ranges 3-4(2)
Classic MV
±0.04% of span
For spans less than 10:1,
±[0.01 + 0.004(URL / Span)]% of span
±0.055% of span
For spans less than 10:1,
±[0.015 + 0.005(URL/Span)]% of span
±0.065% of span
For spans less than 10:1,
±[0.015 + 0.005(URL/Span)]% of span
±0.10% of span
For spans less than 15:1,
±[0.025 + 0.005(URL / Span)]% of span
±0.055% of span
For spans less than 10:1,
±[0.0065(URL / Span)]% of span
Ultra for Flow(1)
±0.04% of reading up to 8:1 DP turndown from URL
±[0.04 + 0.0023(URL / Reading)]% of reading to 200:1 DP turndown from URL
±0.05% of reading up to 3:1 DP turndown from URL
±[0.05 + 0.0145(URL/RDG)]% of reading to 100:1 DP turndown from URL
Not Available
Not Available
±0.025% of span
For spans less than 10:1,
±[0.004(URL / Span)]% of span
(1) Ultra for Flow is only available for 3051SMV DP ranges 2-4. For calibrated DP spans from 1:1 to 2:1 of URL, add ±0.005% of span analog output error.
(2) For DP range 4 or 5, Classic MV and Ultra for Flow static pressure accuracy is +/-0.055% of span. For spans less than 5:1, +/-[0.013(URL/Span)]% of span.
Liquid Level Transmitter
3051SAL
Ultra
±0.055% of span
For spans less than 10:1,
±[0.015 + 0.005(URL / Span)]% of span
Classic
±0.065% of span
For spans less than 10:1,
±[0.015 + 0.005(URL / Span)]% of span
Process Temperature RTD Interface(1)
Process Temperature (3051SMV_ _1 or 3)
±0.67 °F (0.37 °C)
(1) Specifications for process temperature are for the transmitter portion only. The transmitter is compatible with any Pt 100 (100 ohm platinum) RTD. Examples of
compatible RTDs include Rosemount series 68 and 78 RTD Temperature Sensors.
DP Reference Accuracy of 3051S ERS System(1)
2 Coplanar Gage Transmitters (3051SAM_ _G)
Ranges 2-4
Range 5
Ultra
±0.035% of DP span
±0.071% of DP span
Classic
±0.078% of DP span
±0.092% of DP span
2 Coplanar Absolute Transmitters (3051SAM_ _A)
80
www.rosemount.com
January 2013
Rosemount 3051S Series
DP Reference Accuracy of 3051S ERS System(1)
Ranges 1-4
Ultra
±0.035% of DP span
Classic
±0.078% of DP span
2 In-Line Gage Transmitters (3051SAM_ _T)
2 In-Line Absolute Transmitters (3051SAM_ _E)
Ranges 1-4
Ultra
±0.035% of DP span
Classic
±0.078% of DP span
2 Liquid Level Transmitters (3051SAL)
Ranges 1-4
Ultra
±0.092% of DP span
Classic
±0.092% of DP span
(1) Reference Accuracy specifications for ERS system assume that the configuration contains two transmitters with identical sensor ranges, each transmitter sensor
is calibrated 0 – URL, and the DP Span = 10% of transmitter URL.
Transmitter Total Performance
Total performance is based on combined errors of reference accuracy, ambient temperature effect, and line pressure effect at normal
operating conditions (70% of span typical reading, 740 psi (51 bar) line pressure).
Models
3051S_CD
Ranges 2-3
3051S_CG
Ranges 2-5
3051S_CA
Ranges 2-4
3051S_T
Ranges 2-4
3051SMV(2)
DP Ranges 2-3
3051SAM_ _G(3)
Ranges 2-5
3051SAM_ _A(3)
Ranges 2-4
3051SAM_ _T(3)
Ranges 2-4
3051SAM_ _E(3)
Ranges 2-4
3051SAL
Ultra
Classic and Classic MV
±0.1% of span
±0.14% of span
For ±50 °F (28 °C) temperature
changes; 0-100% relative
humidity, from 1:1 to 5:1
rangedown
For ±50 F (28 °C) temperature
changes, 0-100% relative
humidity, from 1:1 to 5:1
rangedown
Ultra for Flow(1)
±0.15% of reading
For ±50 °F (28 °C) temperature
changes, 0-100% relative humidity,
over 8:1 DP turndown from URL
Use Instrument Toolkit or the QZ Option to quantify the total performance of a remote seal assembly under
operating conditions.
(1) Ultra for Flow is only available for 3051S_CD Ranges 2-3 and 3051SMV DP Ranges 2-4.
(2) For 3051SMV, Transmitter Total Performance specification applies to differential pressure measurement only.
(3) Specifications are for each gage / absolute pressure sensor of the ERS system and are not reflective of the DP calculation.
www.rosemount.com
81
Rosemount 3051S Series
January 2013
MultiVariable Flow Performance(1)
Mass, Energy, Actual Volumetric, and Totalized Flow Reference Accuracy
Models
Ultra for Flow
Classic MV
3051SMV(2)
DP Ranges 2-3 ±0.65% of Flow Rate over a 14:1 flow range
(200:1 DP range)
DP Range 1
±0.70% of Flow Rate over 8:1 flow range
(64:1 DP range)
±0.90% of Flow Rate over 8:1 flow range
(64:1 DP range)
Not Available
Annubar Flowmeter (3051SFA)
Ranges 2-3 ±0.80% of flow rate at 14:1 flow turndown
±1.15% of flow rate at 8:1 flow turndown
Compact Annubar Flowmeter (3051SFC_A)
Ranges 2-3
Uncalibrated ±1.55% of flow rate at 14:1 flow turndown
±1.60% of flow rate at 8:1 flow turndown
Calibrated ±0.80% of flow rate at 14:1 flow turndown
±1.00% of flow rate at 8:1 flow turndown
Compact Conditioning Orifice Flowmeter (3051SFC_C)
Ranges 2-3
 = 0.4 ±0.75% of flow rate at 14:1 flow turndown
±1.10% of flow rate at 8:1 flow turndown
 = 0.65 ±1.15% of flow rate at 14:1 flow turndown
±1.45% of flow rate at 8:1 flow turndown
Compact Orifice Flowmeter(3) (3051SFC_P)
Ranges 2-3
 = 0.4 ±1.30% of flow rate at 14:1 flow turndown
±1.45% of flow rate at 8:1 flow turndown
 = 0.65 ±1.30% of flow rate at 14:1 flow turndown
±1.45% of flow rate at 8:1 flow turndown
Integral Orifice Flowmeter (3051SFP)
Ranges 2-3
 < 0.1 ±2.60% of flow rate at 14:1 flow turndown
±2.65% of flow rate at 8:1 flow turndown
0.1 <  < 0.2 ±1.40% of flow rate at 14:1 flow turndown
±1.60% of flow rate at 8:1 flow turndown
0.2 <  < 0.6 ±0.95% of flow rate at 14:1 flow turndown
±1.25% of flow rate at 8:1 flow turndown
0.6 <  < 0.8 ±1.60% of flow rate at 14:1 flow turndown
±1.80% of flow rate at 8:1 flow turndown
(1) Flow performance specifications assume device is configured for full compensation of static pressure, process temperature, density, viscosity, gas expansion,
discharge coefficient, and thermal correction variances over a specified operating range.
(2) Uncalibrated differential producer (0.2 < beta < 0.6 Orifice) installed per ASME MFC 3M or ISO 5167-1. Uncertainties for discharge coefficient, producer bore, tube
diameter, and gas expansion factor as defined in ASME MFC 3M or ISO 5167-1. Reference accuracy does not include RTD sensor accuracy.
(3) For line sizes less than 2-in. (50mm) or greater than 8 in. (200 mm), see the Rosemount DP Flowmeters and Primary Elements Product Data Sheet (document
number 00813-0100-4485).
Uncompensated Flow Performance
Flow performance specifications assume the device only uses DP readings without pressure and temperature compensation.
Models
Ultra
Annubar Flowmeter (3051SFA)
Ranges 2-3 ±0.95% of flow rate at 8:1 flow turndown
Compact Conditioning Orifice Flowmeter (3051SFC_C)
Ranges 2-3
 = 0.4 ±0.90% of flow rate at 8:1 flow turndown
 = 0.65 ±1.25% of flow rate at 8:1 flow turndown
Compact Annubar Flowmeter (3051SFC_A)
Ranges 2-3
Uncalibrated ±1.65% of flow rate at 8:1 flow turndown
Calibrated ±0.95% of flow rate at 8:1 flow turndown
Compact Orifice Flowmeter(1) (3051SFC_P)
Ranges 2-3
 = 0.4 ±1.35% of flow rate at 8:1 flow turndown
 = 0.65 ±1.35% of flow rate at 8:1 flow turndown
82
Classic
Ultra for Flow
±1.25% of flow rate at 8:1 flow turndown
±0.80% of flow rate at 14:1 flow turndown
±1.10% of flow rate at 8:1 flow turndown
±1.40% of flow rate at 8:1 flow turndown
±0.75% of flow rate at 14:1 flow turndown
±1.15% of flow rate at 14:1 flow turndown
±1.70% of flow rate at 8:1 flow turndown
±1.25% of flow rate at 8:1 flow turndown
±1.55% of flow rate at 14:1 flow turndown
±0.80% of flow rate at 14:1 flow turndown
±1.80% of flow rate at 8:1 flow turndown
±1.80% of flow rate at 8:1 flow turndown
±1.30% of flow rate at 14:1 flow turndown
±1.30% of flow rate at 14:1 flow turndown
www.rosemount.com
January 2013
Rosemount 3051S Series
Integral Orifice Flowmeter (3051SFP)
Ranges 2-3
 < 0.1 ±2.65% of flow rate at 8:1 flow turndown
0.1 <  < 0.2 ±1.45% of flow rate at 8:1 flow turndown
0.2 <  < 0.6 ±1.10% of flow rate at 8:1 flow turndown
0.6 <  < 0.8 ±1.70% of flow rate at 8:1 flow turndown
±2.70% of flow rate at 8:1 flow turndown
±1.80% of flow rate at 8:1 flow turndown
±1.50% of flow rate at 8:1 flow turndown
±2.00% of flow rate at 8:1 flow turndown
±2.60% of flow rate at 14:1 flow turndown
±1.40% of flow rate at 14:1 flow turndown
±0.95% of flow rate at 14:1 flow turndown
±1.60% of flow rate at 14:1 flow turndown
(1) For line sizes less than 2-in. (50mm) or greater than 8 in. (200 mm), see the Rosemount DP Flowmeters and Primary Elements Product Data Sheet (document
number 00813-0100-4485).
Long Term Stability
Pressure
Models
3051S_CD
Ranges 2-5
3051S_CG
Ranges 2-5
3051S_CA
Ranges 1-4
Ranges 1-5
3051S_T
3051SMV
3051SF
DP Ranges 2-5
AP & GP Ranges 3-4
3051SAM_ _G(2)
Ranges 2-5
3051SAM_ _A(2)
Ranges 1-4
3051SAM_ _T(2)
Ranges 1-5
3051SAM_ _E(2)
Ranges 1-5
Ultra and Ultra for Flow(1)
Classic and Classic MV
±0.20% of URL for 10 years; for ±50 °F (28 °C)
temperature changes, up to 1000 psi (68,9 bar)
line pressure
±0.125% of URL for 5 years; for ±50 °F
(28 °C) temperature changes, up to 1000 psi
(68,9 bar) line pressure
(1) Ultra is only available for 3051S, 3051SMV_ _3 and 4, 3051SF_3, 4, 7, and D. Ultra for Flow is only available on 3051S_CD ranges 2-3, 3051SMV DP ranges 2-4,
and 3051SF DP ranges 2-3.
(2) Specifications are for each gage / absolute pressure sensor of the ERS system and are not reflective of the DP calculation.
Process Temperature(1)
Models
3051SMV
3051SF
RTD Interface(1)
The greater of ±0.185 °F (0.103 °C) or 0.1% of reading per year (excludes RTD sensor stability).
(1) Specifications for process temperature are for the transmitter portion only. The transmitter is compatible with any Pt 100 (100 ohm platinum) RTD. Examples of
compatible RTDs include the Rosemount Series 68 and 78 RTD Temperature Sensors.
www.rosemount.com
83
Rosemount 3051S Series
January 2013
Warranty(1)
Models
Ultra and Ultra for Flow
Classic and Classic MV
All 3051S Products(1)
12-year limited warranty(2)
1-year limited warranty(3)
(1) Warranty details can be found in Emerson Process Management Terms & Conditions of Sale, Document 63445, Rev G (10/06).
(2) Rosemount Ultra and Ultra for Flow transmitters have a limited warranty of twelve (12) years from date of shipment. All other provisions of Emerson Process
Management standard limited warranty remain the same.
(3) Goods are warranted for twelve (12) months from the date of initial installation or eighteen (18) months from the date of shipment by seller, whichever period
expires first.
Dynamic Performance
Total Time Response at 75 °F (24 °C), includes dead time(1)(2)
3051S_C
3051SF_D
DP Ranges 2-5: 100 ms
Range 1: 255 ms
Range 0: 700 ms
3051S_T
3051SMV_ _1 or 2
3051SF_1, 2, 5, or 6
3051SMV_ _3 or 4
3051SF_3, 4, or 7
ERS System (3051SAM)
100 ms
DP Range 1: 310 ms
DP Range 2: 170 ms
DP Range 3: 155 ms
AP & GP: 240 ms
DP Ranges 2-5: 145 ms
DP Range 1: 300 ms
DP Range 0: 745 ms
360 ms
(1) For FOUNDATION fieldbus (output code F), add 52 ms to stated values (not including segment macro-cycle).
For option code DA2, add 45 ms (nominal) to stated values.
(2) Consult Instrument Toolkit for transmitter configurations with remote seals including 3051SAL.
Dead Time(1)
3051S_C
3051S_T
3051SF_D
3051SAL_C
3051SMV
3051SF_1-7
ERS System (includes
3051SAM, 3051SAL_P, and
3051SAL_S models
45 ms (nominal)
DP: 100 ms
AP & GP: 140 ms
RTD Interface: 1 s
220 ms
(1) For option code DA2, dead time is 90 milliseconds (nominal).
Sensor Update Rate(1)
3051S_C or T
3051SF_D
3051SAL_C
3051SMV
3051SF_1-7
22 updates per sec.
DP: 22 updates per sec.
AP & GP: 11 updates per sec.
RTD Interface: 1 update per sec.
ERS System (includes
3051SAM, 3051SAL_P, and
3051SAL_S models
Calculated Variables:
Mass / Volumetric Flow Rate: 22 updates per sec.
Energy Flow Rate: 22 updates per sec.
Totalized Flow: 1 update per sec.
11 updates per sec.
(1) Does not apply to Wireless (output code X). See“IEC 62591 (WirelessHART)” on page 93 for wireless update rate.
84
www.rosemount.com
January 2013
Rosemount 3051S Series
Ambient Temperature Effect
Transmitter with Coplanar Sensor Module (Single Variable)
Differential Pressure: (3051S_CD, 3051SMV_ _3 or 4)
Gage Pressure: (3051S_CG, 3051SAM_ _G(1))
Ranges 2 - 5(3)
Range 0
Range 1
Ultra
per 50 °F (28 °C)
Classic
per 50 °F (28 °C)
Ultra for Flow(2)
-40 to 185 °F (-40 to 85 °C)
±(0.009% URL + 0.025% span)
from 1:1 to 10:1;
±(0.018% URL + 0.08% span) from
>10:1 to 200:1
±(0.25% URL + 0.05% span) from
1:1 to 30:1
±(0.1% URL + 0.25% span)
from 1:1 to 50:1
±(0.0125% URL +0.0625% span)
from 1:1 to 5:1;
±(0.025% URL + 0.125% span)
from >5:1 to 150:1
±(0.25% URL + 0.05% span)
from 1:1 to 30:1
±(0.1% URL + 0.25% span)
from 1:1 to 50:1
±0.13% of reading up to 8:1 DP turndown
from URL;
±[0.13 + 0.0187(URL/Reading)]% of
reading to 100:1 DP turndown from URL
Not Available
Not Available
Absolute Pressure: (3051S_CA, 3051SAM_ _A(1))
Ranges 2-4
Range 0
Range 1
Ultra
per 50 °F (28 °C)
Classic
per 50 °F (28 °C)
±(0.0125% URL + 0.0625% span)
from 1:1 to 5:1;
±(0.025% URL + 0.125% span)
from >5:1 to 200:1
±(0.1% URL + 0.25% span)
from 1:1 to 30:1
±(0.0125% URL + 0.0625% span)
from 1:1 to 5:1;
±(0.025% URL + 0.125% span)
from >5:1 to 100:1
±(0.0125% URL + 0.0625% span) from 1:1 to
5:1;
±(0.025% URL + 0.125% span) from >5:1 to
150:1
±(0.1% URL + 0.25% span) from 1:1 to 30:1
±(0.0125% URL + 0.0625% span) from 1:1 to
5:1;
±(0.025% URL + 0.125% span) from >5:1 to
100:1
(1) Specifications are for each gage / absolute pressure sensor of the ERS system and are not reflective of the DP calculation.
(2) Ultra for Flow is only available for 3051S_CD Ranges 2-3 and 3051SMV DP Ranges 2-3.
(3) Use Classic specification for 3051SMV DP Range 5 Ultra and 3051S_CD Range 5 Ultra.
Transmitter with In-Line Sensor Module
Absolute Pressure: (3051S_TA, 3051SAM_ _E(1))
Gage Pressure: (3051S_TG, 3051SAM_ _T(1))
Ranges 2-4
Range 5
Range 1
Ultra
per 50 °F (28 °C)
Classic
per 50 °F (28 °C)
±(0.009% URL + 0.025% span) from
1:1 to 10:1;
±(0.018% URL + 0.08% span) from
>10:1 to 200:1
±(0.05% URL + 0.075% span) from
1:1 to 10:1
±(0.0125% URL + 0.0625% span)
from 1:1 to 5:1;
±(0.025% URL + 0.125% span) from
>5:1 to 100:1
±(0.0125% URL + 0.0625% span)
from 1:1 to 5:1;
±(0.025% URL + 0.125% span)
from >5:1 to 150:1
±(0.05% URL + 0.075% span)
from 1:1 to 10:1
±(0.0125% URL + 0.0625% span)
from 1:1 to 5:1;
±(0.025% URL + 0.125% span)
from >5:1 to 100:1
(1) Specifications are for each gage / absolute pressure sensor of the ERS system and are not reflective of the DP calculation.
www.rosemount.com
85
Rosemount 3051S Series
January 2013
Ambient Temperature Effect (continued)
Transmitter with MultiVariable Sensor Module
Differential Pressure and Static Pressure (3051SMV_ _1 or 2)
Models
Classic MV
Per 50 °F (28 °C)
DP Ranges 2-3
DP Range 4
DP Range 5
DP Range 1
AP & GP
Ultra for Flow
-40 to 185 °F (-40 to 85 °C)
±(0.0125% URL + 0.0625% span)
from 1:1 to 5:1;
±(0.025% URL + 0.125% span) for >5:1 to 100:1
±(0.025% URL + 0.125% span) from 1:1 to 30:1
±(0.035% URL + 0.125% span) from 30:1 to 100:1
±(0.025% URL + 0.125% span) from 1:1 to 30:1
±(0.035% URL + 0.125% span) from 30:1 to 100:1
±(0.1% URL + 0.25% span)
from 1:1 to 50:1
±(0.0125% URL + 0.0625% span)
from 1:1 to 10:1;
±(0.025% URL + 0.125% span) for >10:1 to 100:1
±0.13 reading up to 8:1 DP turndown from URL;
±[0.13 + 0.0187(URL/Reading)]% reading to 100:1 DP turndown from URL
±0.130% of reading less than or equal to 3:1
±[0.050 + 0.065 (URL/RDG)]% of reading greater than 3:1
Not Available
Not available
±(0.009% URL + 0.025% span)
from 1:1 to 10:1;
±(0.018% URL + 0.08% span) for >10:1(1)
(1) For DP range 4 or 5, Ultra for Flow ambient temperature effect on static pressure is +/-(0.0125% URL + 0.0625% Span) from 1:1 to 10:1; +/-(0.025% URL + 0.125%
Span) for >10:1.
Liquid Level Transmitter
3051SAL
Ultra
Classic
See Instrument Toolkit
See Instrument Toolkit
Process Temperature RTD Interface(1)
Process Temperature (3051SMV_ _1 or 3)
Classic MV
Per 50 °F (28 °C)(1)
Ultra for Flow
-40 to 185 °F (-40 to 85 °C)
±0.39 °F (0,216 °C) per 50 °F (28 °C)
±0.39 °F (0,216 °C) per 50 °F (28 °C)
(1) Specifications for process temperature are for the transmitter portion only. The transmitter is
compatible with any Pt 100 (100 ohm platinum) RTD. Examples of compatible RTDs include
Rosemount series 68 and 78 RTD Temperature Sensors.
Line Pressure Effect(1)
3051S_CD
3051SMV (DP Measurement Only)
Ultra and Ultra for Flow
Classic and Classic MV
Range 2-3
± 0.025% URL per 1000 psi (69 bar)
± 0.05% URL per 1000 psi (69 bar)
Range 0
± 0.125% URL per 100 psi (6,9 bar)
± 0.125% URL per 100 psi (6,9 bar)
Range 1
± 0.25% URL per 1000 psi (69 bar)
± 0.25% URL per 1000 psi (69 bar)
Range 2-3
± 0.1% of reading per 1000 psi (69 bar)
± 0.1% of reading per 1000 psi (69 bar)
Range 0
± 0.15% of reading per 100 psi (6,9 bar)
± 0.15% of reading per 100 psi (6,9 bar)
Range 1
± 0.4% of reading per 1000 psi (69 bar)
± 0.4% of reading per 1000 psi (69 bar)
(2)
Zero Error
Span Error(3)
(1) For zero error specifications for line pressures above 2000 psi (137,9 bar) or line pressure effect specifications for DP Ranges 4-5, see the 3051SMV Reference
Manual (document number 00809-0100-4803) or 3051S Reference Manual (document number 00809-0100-4801).
(2) Zero error can be removed by performing a zero trim at line pressure.
(3) Specifications for option code P0 are 2 times those shown above.
86
www.rosemount.com
January 2013
Rosemount 3051S Series
Mounting Position Effects
Models
Ultra, Ultra for Flow, Classic and Classic MV
3051S_CD or CG
3051SMV_ _ 3 or 4
3051SF_3, 4, 7, or D
3051SAM_ _G
3051S_CA
3051S_T
3051SAM_ _A, T, or E
Zero shifts up to ±1.25 inH2O (3,11 mbar), which can be zeroed
Span: no effect
Zero shifts to ±2.5 inH2O (6,22 mbar), which can be zeroed
Span: no effect
DP Sensor:
3051SMV_ _ 1 or 2
3051SF_1, 2, 5, or 6
3051SAL
GP/AP
Sensor:
Zero shifts up to ±1.25 inH2O (3,11 mbar), which can be zeroed
Span: no effect
Zero shifts to ±2.5 inH2O (6,22 mbar), which can be zeroed
Span: no effect
With liquid level diaphragm in vertical plane, zero shift of up to ±1 inH2O (2,5 mbar). With diaphragm in
vertical plane, zero shift of up to ±5 inH2O (12,4 mbar) plus extension length on extended units. All zero
shifts can be zeroed.
Span: no effect
Vibration Effect
Less than ±0.1% of URL when tested per the requirements of IEC60770-1
field or pipeline with high vibration level (10-60 Hz 0.21 mm
displacement peak amplitude / 60-2000 Hz 3g).
For Housing Style codes 1J, 1K, 1L, 2J, and 2M:
Less than ±0.1% of URL when tested per the requirements of IEC60770-1
field with general application or pipeline with low vibration level (10-60
Hz 0.15 mm displacement peak amplitude / 60-500 Hz 2g).
Power Supply Effect
Less than ±0.005% of calibrated span per volt change in voltage at the
transmitter terminals
Electromagnetic Compatibility (EMC)
Meets all relevant requirements of EN 61326 and NAMUR NE-21.(1)(2)
(1) NAMUR NE-21 does not apply to wireless output code X or ERS
configurations.
(2) 3051SMV and 3051SF_1, 2, 3, 4, 5, 6, 7 requires shielded cable for both
temperature and loop wiring.
Transient Protection (Option T1)
Tested in accordance with IEEE C62.41.2-2002,
Location Category B
6 kV crest (0.5 s - 100 kHz)
3 kA crest (8 × 20 microseconds)
6 kV crest (1.2 × 50 microseconds)
www.rosemount.com
87
Rosemount 3051S Series
January 2013
Functional Specifications
Range and Sensor Limits
Transmitter with Coplanar Sensor Module (Single Variable)
DP Sensor(1)
(3051S_CD, 3051SMV_ _3, 4, or D
3051SF_3, 4, or 7, 3051SAL_CD)
AP Sensor(2)
(3051S_CA, 3051SAM_ _A, 3051SAL_ _A)
GP Sensor
(3051S_CG, 3051SAM_ _G, 3051SAL_ _G)
Range
Lower (LRL)(3)
Upper (URL)
Lower (LRL)(4)
Upper (URL)
Lower (LRL)
Upper (URL)
0
-3 inH2O
(-7,5 mbar)
-25 inH2O
(-62,3 mbar)
-250 inH2O
(-0,62 bar)
-1000 inH2O
(-2,49 bar)
-300 psi
(-20,7 bar)
-2000 psi
(-137,9 bar)
3 inH2O
(7,5 mbar)
25 inH2O
(62,3 mbar)
250 inH2O
(0,62 bar)
1000 inH2O
(2,49 bar)
300 psi
(20,7 bar)
2000 psi
(137,9 bar)
N/A
N/A
-25 inH2O
(-62,3 mbar)
-250 inH2O
(-0,62 bar)
-393 inH2O
(-979 mbar)
-14.2 psig
(-979 mbar)
-14.2 psig
(-979 mbar)
25 inH2O
(62,3 mbar)
250 inH2O
(0,62 bar)
1000 inH2O
(2,49 bar)
300 psi
(20,7 bar)
2000 psi
(137,9 bar)
0 psia
(0 bar)
0 psia
(0 bar)
0 psia
(0 bar)
0 psia
(0 bar)
0 psia
(0 bar)
N/A
5 psia
(0,34 bar)
30 psia
(2,07 bar)
150 psia
(10,34 bar)
800 psia
(55,16 bar)
4000 psia
(275,8 bar)
N/A
1
2
3
4
5
(1) 3051SF flowmeters only available with ranges 1, 2, and 3.
(2) Range 0 is not available for 3051SAL_ _A.
(3) The Lower Range Limit (LRL) is 0 inH20 (0 mbar) for Ultra for Flow Performance Class and 3051SF flowmeters.
(4) Assumes atmospheric pressure of 14.7 psia (1 bar-a).
Transmitter with In-Line Sensor Module
GP Sensor
(3051S_TG, 3051SAM_ _T, 3051SAL_ _T)
AP Sensor
(3051S_TA, 3051SAM_ _E, 3051SAL_ _E)
Range
Lower (LRL)(1)
Upper (URL)
Lower (LRL)
Upper (URL)
1
2
3
4
5
-14.7 psig (-1,01 bar)
-14.7 psig (-1,01 bar)
-14.7 psig (-1,01 bar)
-14.7 psig (-1,01 bar)
-14.7 psig (-1,01 bar)
30 psig (2,07 bar)
150 psig (10,34 bar)
800 psig (55,16 bar)
4000 psig (275,8 bar)
10000 psig (689,5 bar)
0 psia (0 bar)
0 psia (0 bar)
0 psia (0 bar)
0 psia (0 bar)
0 psia (0 bar)
30 psia (2,07 bar)
150 psia (10,34 bar)
800 psia (55,16 bar)
4000 psia (275,8 bar)
10000 psia (689,5 bar)
(1) Assumes atmospheric pressure of 14.7 psia (1 bar-a).
Transmitter with MultiVariable Sensor Module
(3051SMV_ _1, 3051SMV_ _2, 3051SF_1, 3051SF_2, 3051SF_5, and 3051SF_6)
DP Sensor
Range
Lower (LRL)(1)
Upper (URL)
1
2
3
4
5
-25.0 inH2O (-62,3 mbar)
-250.0 inH2O (-0,62 bar)
-1000.0 inH2O (-2,49 bar)
-150 psi (-10,34 bar)
-2000 psi (-137,9 bar)
25.0 inH2O (62,3 mbar)
250.0 inH2O (0,62 bar)
1000.0 inH2O (2,49 bar)
150 psi (10,34 bar)
2000 psi (137,9 bar)
(1) Lower (LRL) is 0 inH2O (0 mbar) for Ultra for Flow and 3051SF_ Flowmeters.
88
www.rosemount.com
January 2013
Rosemount 3051S Series
Static Pressure Sensor (GP/AP)
Lower (LRL)
Upper (URL)(1)
3
GP
: -14.2 psig (0,98 bar)
AP: 0.5 psia (34,5 mbar)
GP: 800 psig (55,16 bar)
AP: 800 psia (55,16 bar)
4
GP(2)(3): -14.2 psig (0,98 bar)
AP: 0.5 psia (34,5 mbar)
GP: 3626 psig (250 bar)
AP: 3626 psia (250 bar)
Range
(2)(3)
(1) For SP Range 4 with DP Range 1, the URL is 2000 psi (137,9 bar).
(2) Inert Fill: Minimum pressure = 1.5 psia (0,10 bar) or -13.2 psig (-0,91 bar).
(3) Assumes atmospheric pressure of 14.7 psia (1 bar-a).
Process Temperature RTD Interface
(3051SMV_ _1 or 3, 3051SF_1, 3, 5 or 7)(1)
Lower (LRL)
Upper (URL)
-328 °F (-200 °C)
1562 °F (850 °C)
(1) Transmitter is compatible with any Pt 100 RTD sensor. Examples of compatible RTDs include Rosemount Series 68 and 78 RTD Temperature Sensors.
Minimum Span Limits
Transmitter with Coplanar Sensor Module (Single Variable)
DP Sensor(1)
(3051S_CD, 3051SMV_ _3 or 4,
3051SF_D, 3, 4 or 7, 3051SAL_ _CD(2))
Range
0
1
2
3
4
5
GP Sensor
(3051S_CG, 3051SAM_ _G(3),
3051SAL_ _G(2)(3))
AP Sensor
(3051S_CA, 3051SAM_ _A(3), 3051SAL_ _A(2)(3))
Ultra &
Ultra for Flow
Classic
Ultra
Classic
Ultra
Classic
0.10 inH2O
(0,25 mbar)
0.50 inH2O
(1,24 mbar)
1.25 inH2O
(3,11 mbar)
5.00 inH2O
(12,43 mbar)
1.50 psi
(103,42 mbar)
10.00 psi
(689,48 mbar)
0.10 inH2O
(0,25 mbar)
0.50 inH2O
(1,24 mbar)
1.67 inH2O
(4,14 mbar)
6.67 inH2O
(16,58 mbar)
2.00 psi
(137,90 mbar)
13.33 psi
(0,92 bar)
N/A
N/A
0.50 inH2O
(1,24 mbar)
1.25 inH2O
(3,11 mbar)
5.00 inH2O
(12,43 mbar)
1.50 psig
(103,42 mbar)
10.00 psig
(689,48 mbar)
0.50 inH2O
(1,24 mbar)
1.67 inH2O
(4,14 mbar)
6.67 inH2O
(16,58 mbar)
2.00 psig
(137,90 mbar)
13.33 psig
(0,92 bar)
0.167 psia
(11,49 mbar)
0.30 psia
(20,68 mbar)
0.75 psia
(51,71 mbar)
4.00 psia
(275,79 mbar)
20.00 psia
(1,38 bar)
N/A
0.167 psia
(11,49 mbar)
0.30 psia
(20,68 mbar)
1.00 psia
(68,95 mbar)
5.33 psia
(367,72 mbar)
26.67 psia
(1,84 bar)
N/A
(1) 3051SF flowmeters only available with ranges 1, 2, and 3.
(2) For 3051SAL models, use Classic minimum span limits.
(3) Specifications are for each gage / absolute pressure sensor of the ERS system and are not reflective of the DP calculation.
Transmitter with In-Line Sensor Module
GP Sensor
(3051S_TG, 3051SAM_ _T(1), 3051SAL_ _T(2))
AP Sensor
(3051S_TA, 3051SAM_ _E(1), 3051SAL_ _E(2))
Range
Ultra
Classic
Ultra
Classic
1
2
3
4
5
0.30 psig (20,68 mbar)
0.75 psig (51,71 mbar)
4.00 psig (275,79 mbar)
20.00 psig (1,38 bar)
1000.00 psig (68,95 bar)
0.30 psig (20,68 mbar)
1.00 psig (68,95 mbar)
5.33 psig (367,72 mbar)
26.67 psig (1,84 bar)
2000.00 psig (137,90 bar)
0.30 psia (20,68 mbar)
0.75 psia (51,71 mbar)
4.00 psia (275,79 mbar)
20.00 psia (1,38 bar)
1000.00 psia (68,95 bar)
0.30 psia (20,68 mbar)
1.00 psia (68,95 mbar)
5.33 psia (367,72 mbar)
26.67 psia (1,84 bar)
2000.00 psia (137,90 bar)
www.rosemount.com
89
Rosemount 3051S Series
January 2013
(1) Specifications are for each gage / absolute pressure sensor of the ERS system and are not reflective of the DP calculation.
(2) For 3051SAL models, use Classic minimum span limits.
Transmitter with MultiVariable Sensor Module
(3051SMV_ _1 or 2, 3051SF_1, 2, 5, or 6)
DP Sensor
Range
Ultra for Flow
Classic MV
1
2
3
4
5
0.5 inH2O (1,24 mbar)
1.3 inH2O (3,23 mbar)
5.0 inH2O (12,4 mbar)
1.5 psi (103,4 mbar)
Not Available
0.5 inH2O (1,24 mbar)
2.5 inH2O (6,23 mbar)
10.0 inH2O (24,9 mbar)
3.0 psi (206,84 mbar)
20.0 psi (1,38 bar)
Static Pressure Sensor (GP/AP)
Range
Ultra for Flow
Classic MV
3
4
4.0 psi (276 mbar)
18.13 psi (1,25 bar)
8.0 psi (522 mbar)
36.26 psi (2,50 bar)
Process Temperature RTD Interface
(3051SMV_ _1 or 3, 3051SF_1, 3, 5 or 7)
Minimum Span = 52 °F (11 °C)
DP Span Considerations for Electronic Remote Sensor Applications
It is recommended that the DP rangedown (Operating Pressure/DP
Span) for ERS applications not exceed 100:1. Consult with your Emerson
Process Management sales representative when considering a 3051S
ERS System for applications beyond 100:1 rangedown.
Service
3051S, 3051SMV_P, 3051SAM, and 3051SF_5, 6, 7, or D (Direct Process Variable Output):
Liquid, gas, and vapor applications
3051SAL
Liquid level applications
3051SMV_M and 3051SF_1, 2, 3, or 4 (Mass and Energy Flow Output):
Some fluid types are only supported by certain measurement types
Fluid Compatibility with Pressure and Temperature Compensation
Ordering
Code
1
2
3
4
• Available
Measurement Type
DP / P/ T (Full Compensation)
DP / P
DP / T
DP only
Liquids
Saturated Steam
Superheated Steam
Gas and Natural Gas
•
•
•
•
•
•
•
•
•
•
—
—
•
•
—
—
4–20 mA HART
Zero and Span Adjustment
Zero and span values can be set anywhere within the range.
Span must be greater than or equal to the minimum span.
Output
Two-wire 4–20 mA is user-selectable for linear or square root
output. Digital process variable superimposed on 4–20 mA
signal, available to any host that conforms to the HART
protocol.
90
— Not available
Fluid Types
Power Supply
External power supply required.
• 3051S and 3051SF_D: 10.5 to 42.4 Vdc with no load
• 3051S and 3051SF_D with Advanced HART Diagnostics Suite: 12 to
42.4 Vdc with no load
• 3051SMV and 3051SF_1-7: 12 to 42.4 Vdc with no load
www.rosemount.com
January 2013
Rosemount 3051S Series
Load Limitations
Maximum loop resistance is determined by the voltage level
of the external power supply, as described by:
3051S and 3051SF_D
Maximum Loop Resistance = 43.5 * (Power Supply Voltage –
10.5)
Load (Ohms)
1387
1000
500
Operating
Region
0
10.5
20
30
Voltage (Vdc)
42.4
The Field Communicator requires a minimum
loop resistance of 250 for communication.
3051SMV and 3051SF_1-7
3051S and 3051SF_D with HART Diagnostics
(option code DA2)
Maximum Loop Resistance = 43.5 * (Power Supply Voltage –
12.0)
Load (Ohms)
Power Advisory diagnostic proactively detects and notifies
you of degraded electrical loop integrity before it can affect
your process operation. Example loop problems that can be
detected include water in the terminal compartment,
corrosion of terminals, improper grounding, and unstable
power supplies.
The Device Dashboard presents the diagnostics in a
graphical, task-based interface that provides single click
access to critical process/device information and descriptive
graphical troubleshooting.
Suite includes: Statistical Process Monitoring (SPM), Power
Advisory, Status Log, Variable Log, Advanced Process Alerts,
Service Alerts, and Time Stamp capability.
FOUNDATION fieldbus
1322
Power Supply
External power supply required; transmitters operate on 9.0 to
32.0 Vdc transmitter terminal voltage.
Current Draw
17.5 mA for all configurations (including LCD display option)
FOUNDATION fieldbus Parameters
1000
500
Operating
Region
0
12.0
20
30
Voltage (Vdc)
42.4
The Field Communicator requires a minimum
loop resistance of 250 for communication.
Schedule Entries
Links
Virtual Communications Relationships (VCR)
14 (max.)
30 (max.)
20 (max.)
Standard Function Blocks
Resource Block
3051S ERS System
If supply voltage ≤ 16.74 Vdc:
Maximum Loop Resistance = 277 * (Power Supply Voltage – 16.0)
If supply voltage > 16.74 Vdc:
Maximum Loop Resistance = 43.5 * (Power Supply Voltage – 12.0)
1322
Load (Ohms)
Advanced HART Diagnostics Suite
(Option Code DA2)
Statistical Process Monitoring (SPM) provides statistical data
(standard deviation, mean, coefficient of variation) that can
be used to detect process and process equipment
anomalies, including plugged impulse lines, air entrainment,
pump cavitation, furnace flame instability, distillation
column flooding and more. This diagnostic allows you to
take preventative measures before abnormal process
situations result in unscheduled downtime or rework.
• Contains hardware, electronics, and diagnostic information.
Transducer Block
• Contains actual sensor measurement data including the sensor
diagnostics and the ability to trim the pressure sensor or recall
factory defaults.
LCD Block
• Configures the local display.
2 Analog Input Blocks
Operating
Region
206
0
16 16.74
42.4
Voltage (Vdc)
The Field Communicator requires a minimum
loop resistance of 250 for communication.
• Processes the measurements for input into other function blocks.
The output value is in engineering or custom units and contains a
status indicating measurement quality.
PID Block with Auto-tune
• Contains all logic to perform PID control in the field including
cascade and feedforward. Auto-tune capability allows for superior
tuning for optimized control performance.
Backup Link Active Scheduler (LAS)
The transmitter can function as a Link Active Scheduler if the
current link master device fails or is removed from the
segment.
www.rosemount.com
91
Rosemount 3051S Series
Software Upgrade in the Field
Software for the 3051S with FOUNDATION fieldbus is easy to
upgrade in the field using the FOUNDATION fieldbus Common
Device Software Download procedure.
PlantWeb Alerts
Enable the full power of the PlantWeb digital architecture by
diagnosing instrumentation issues, communicating
advisory, maintenance, and failure details, and
recommending a solution.
Advanced Control Function Block Suite
(Option Code A01)
Input Selector Block
•Selects between inputs and generates an output using
specific selection strategies such as minimum, maximum,
midpoint, average, or first “good.”
Arithmetic Block
•Provides pre-defined application-based equations
including flow with partial density compensation, electronic
remote sensors, hydrostatic tank gauging, ratio control and
others.
Signal Characterizer Block
•Characterizes or approximates any function that defines an
input/output relationship by configuring up to twenty X, Y
coordinates. The block interpolates an output value for a
given input value using the curve defined by the configured
coordinates.
Integrator Block
•Compares the integrated or accumulated value from one
or two variables to pre-trip and trip limits and generates
discrete output signals when the limits are reached. This
block is useful for calculating total flow, total mass, or
volume over time.
Output Splitter Block
•Splits the output of one PID or other control block so that
the PID will control two valves or other actuators.
Control Selector Block
•Selects one of up to three inputs (highest, middle, or
lowest) that are normally connected to the outputs of PID or
other control function blocks.
Block
Execution Time
Resource
Transducer
LCD Block
Analog Input 1, 2
PID with Auto-tune
Input Selector
Arithmetic
Signal Characterizer
Integrator
Output Splitter
Control Selector
20 milliseconds
35 milliseconds
20 milliseconds
20 milliseconds
20 milliseconds
20 milliseconds
20 milliseconds
20 milliseconds
92
January 2013
Fully Compensated Mass Flow Block (Option Code H01)
Calculates fully compensated mass flow based on differential
pressure with external process pressure and temperature
measurements over the fieldbus segment. Configuration for
the mass flow calculation is easily accomplished using the
Rosemount Engineering Assistant 5.5.1.
FOUNDATION fieldbus Diagnostics Suite
(Option Code D01)
Statistical Process Monitoring (SPM) provides statistical data
(standard deviation and mean) that can be used to detect
process and process equipment anomalies, including
plugged impulse lines, air entrainment, pump cavitation,
furnace flame instability, distillation column flooding, and
more. This diagnostic allows you to take preventative
measures before abnormal process situations result in
unscheduled downtime or rework.
The Device Dashboard presents the diagnostics in a
graphical, task-based interface that provides single click
access to critical process/device information and descriptive
graphical troubleshooting.
Suite includes: Statistical Process Monitoring (SPM) and
Plugged Impulse Line Detection (PIL).
www.rosemount.com
January 2013
IEC 62591 (WirelessHART)
Output
IEC 62591 (WirelessHART), 2.4 GHz DSSS
Radio Frequency Power Output from Antenna
External Antenna (WK option): Maximum of 10 mW
(10 dBm) EIRP
Extended Range, External Antenna (WM option): Maximum
of 18 mW (12.5 dBm) EIRP
High-Gain, Remote Antenna (WN option): Maximum of 40
mW (16 dBm) EIRP
Local Display
The optional seven-digit LCD can display user-selectable
information such as primary variable in engineering units,
percent of range, sensor module temperature, and
electronics temperature. The display updates based on the
wireless update rate.
Update Rate
User selectable 1 sec. to 60 min.
Power Module
Field replaceable, keyed connection eliminates the risk of
incorrect installation, Intrinsically Safe Lithium-thionyl
chloride Power Module with polybutadine terephthalate
(PBT) enclosure. Ten-year life at one minute update
rate.(1)
(1) Reference conditions are 70 °F (21 °C), and routing data for three
additional network devices.
NOTE: Continuous exposure to ambient temperature limits of
-40 °F or 185 °F (-40 °C or 85 °C) may reduce specified life by less than
20 percent.
Rosemount 3051S Series
Overpressure Limits
Transmitters withstand the following limits without damage:
Coplanar Sensor Module (Single Variable)
DP(1) & GP
AP
Range
3051S_CD, 3051S_CG
3051SMV_ _3 or 4
3051SF_3, 4, 7, or D
3051SAM_ _G
3051S_CA
3051SAM_ _A
0
1
2
3
4
5
750 psi (51,7 bar)
2000 psi (137,9 bar)
3626 psi (250,0 bar)
3626 psi (250,0 bar)
3626 psi (250,0 bar)
3626 psi (250,0 bar)
60 psia (4,13 bar)
750 psia (51,7 bar)
1500 psia (103,4 bar)
1600 psia (110,3 bar)
6000 psia (413,7 bar)
N/A
(1) The overpressure limit of a DP Sensor with the P9 option is 4500 psig
(310,3 bar). The overpressure limit of a DP Sensor with the P0 option
is 6092 psig (420 bar).
In-Line Sensor Module
Range
1
2
3
4
5
GP
AP
3051S_TG
3051SAM_ _T
3051S_TA
3051SAM_ _E
750 psi (51,7 bar)
1500 psi (103,4 bar)
1600 psi (110,3 bar)
6000 psi (413,7 bar)
15000 psi (1034,2 bar)
Coplanar MultiVariable Sensor Module (3051SMV_ _1 or 2,
3051SF_1, 2, 5, or 6)
Static Pressure Range (GP/AP)
DP Range
1
2
3
3
4
1600 psi
(110,3161 bar)
1600 psi
(110,3161 bar)
1600 psi
(110,3161 bar)
2000 psi
(137,9137,8951 bar)
3626 psi
(250,0039 bar)
3626 psi
(250,0039 bar)
3626 psi
(250,0039 bar)
3626 psi
(250,0039 bar)
4
N/A
5
N/A
Liquid Level Transmitter (3051SAL)
Overpressure limit is dependent on the flange rating or sensor rating
(whichever is lower). Use Instrument Toolkit to ensure the seal system
meets all pressure and temperature limits.
www.rosemount.com
93
Rosemount 3051S Series
January 2013
Static Pressure Limits
Coplanar MultiVariable Sensor Module (3051SMV_ _1 or 2,
3051SF_1, 2, 5, or 6)
Coplanar Sensor Module (Single Variable)
Operates within specifications between static line pressures of 0.5 psia
(0,03 bar) and the values in the table below:
Static Pressure Range (GP/AP)
Operates within specifications between static line pressures of:
DP Sensor(1)
3051S_CD
3051SMV_ _3 or 4
3051SF_3, 4, 7, or D
Range
0
1
2
3
4
5
DP Range
1
0.5 psia to 750 psig (0,03 to 51,71 bar)
0.5 psia to 2000 psig (0,03 to 137,9 bar)
0.5 psia to 3626 psig (0,03 to 250 bar)
0.5 psia to 3626 psig (0,03 to 250 bar)
0.5 psia to 3626 psig (0,03 to 250 bar)
0.5 psia to 3626 psig (0,03 to 250 bar)
2
3
3
4
800 psi
(57,91 bar)
800 psi
(57,91 bar)
800 psi
(57,91 bar)
2000 psi
(137,9 bar)
3626 psi
(250 bar)
3626 psi
(250 bar)
3626 psi
(250 bar)
3626 psi
(250 bar)
4
N/A
5
N/A
(1) The static pressure limit of a DP Sensor with the P9 option is 4500
psig (310,3 bar). The static pressure limit of a DP Sensor with the P0
option is 6092 psig (420 bar).
Maximum Working Pressure Limits
Maximum working pressure is the maximum pressure allowed for
normal transmitter operation. For a differential pressure transmitter, the
maximum working pressure is the static line pressure under which the
transmitter can safely operate. If one side of the transmitter is exposed
to the full static line pressure due to mis-valving, the transmitter will
experience an output shift and must be re-zeroed. For a gage or absolute
pressure transmitter, the maximum working pressure is the same as the
Upper Range Limit (URL). The maximum working pressure of
transmitters with assemble-to options is limited by the lowest maximum
pressure rating of the individual components.
Table 16. 3051S Maximum Working Pressure
Range
0
1
2
3
4
5
3051S_CD
3051SAL_ _D
3051SAM_ _D
750 psi
51.7 bar
5.17 mpa
2000 psi
138 bar
13.8 mpa
3626 psi
250 bar
25 mpa
3626 psi
250 bar
25 mpa
3626 psi
250 bar
25 mpa
3626 psi
250 bar
25 mpa
3051S_CG
3051SAL_ _G
3051SAM_ G
N/A
0.9 psi
0.062 bar
0.0062 mpa
9 psi
0.62 bar
0.062 mpa
36 psi
2.48 bar
0.248 mpa
300 psi
20.7 bar
2.07 mpa
2000 psi
138 bar
13.8 mpa
3051S_CA
3051SAL_ _A
3051SAM_ _A
5 psia
0.35 bar-a
.035 mpa
30 psia
2.07 bar-a
0.207 mpa
150 psia
10.3 bar
1.03 mpa
800 psia
55.2 bar-a
5.52 mpa
4000 psia
276 bar-a
27.6 mpa
N/A
3051S_TA
3051SAL_ _E
3051SAM_ _E
3051S_TG
3051SAL_ _T
3051SAM_ _T
N/A
N/A
30 psia
2.07 bar-a
0.207 mpa
150 psia
10.3 bar-a
1.03 mpa
800 psia
55.2 bar-a
5.52 mpa
4000 psia
276 bar-a
27.6 mpa
10000psia
690 bar-a
69.0 mpa
30 psia
2.07 bar-a
0.207 mpa
150 psi
10.3 bar
1.03 mpa
800 psia
55.2 bar
5.52 mpa
4000 psia
276 ba
27.6 mpa
10000psia
690 bar
69.0 mpa
NOTE
The maximum working pressure limit of a DP Sensor with the P9 option
is 4500 psig (310,3 bar). The maximum working pressure limit of a DP
Sensor with the P0 option is 6092 psig (420 bar).
94
www.rosemount.com
January 2013
Rosemount 3051S Series
Process Temperature Limits
Table 17. 3051SMV Maximum Working Pressure
(3051SMV1M1[X]G[Y]R2E12A1A)
X = DP Range
1
2
3
Y = 3 (DP/AP Range)
Y = 4 (GP/AP Range)
800 psi
55.2 bar
5.52 mpa
800 psi
55.2 bar
5.52 mpa
800 psi
55.2 bar
5.52 mpa
2000 psi
138 bar
13.8 mpa
3626 psi
250 bar
25 mpa
3626 psi
250 bar
25 mpa
Burst Pressure Limits
Coplanar Sensor Module
(3051S_C, 3051SMV, 3051SF, 3051SAM_ _G or A)
At atmospheric pressures and above:
Coplanar Sensor Module
3051S_C, 3051SMV, 3051SF, 3051SAM_ _G or A
Silicone Fill Sensor(1)(2)
with Coplanar Flange
-40 to 250 °F (-40 to 121 °C)(3)
with Traditional Flange
-40 to 300 °F (-40 to 149 °C)(3)(4)
with Level Flange
-40 to 300 °F (-40 to 149 °C)(3)
with 305 Integral Manifold
-40 to 300 °F (-40 to 149 °C)(3)(4)
Inert Fill Sensor(1)(5)
-40 to 185 °F (-40 to 85 °C)(6) (7)
In-Line Sensor Module
3051S_T, 3051SAM_ _T or E
Silicone Fill Sensor(1)
-40 to 250 °F (-40 to 121 °C)(3)
Inert Fill Sensor(1)
-22 to 250 °F (-30 to 121 °C)(3)
3051SAL Level Transmitter
Syltherm® XLT
-102 to 293 °F (-75 to 145 °C)
Silicone 704(8)
32 to 401 °F (0 to 205 °C)
Silicone 200
-49 to 401 °F (-45 to 205 °C)
Inert (Halocarbon)
-49 to 320 °F (-45 to 160 °C)
• Ranges 1-4: 11000 psi (758,4 bar)
Glycerin and Water
5 to 203 °F (-15 to 95 °C)
• Range 5: 26000 psi (1792,64 bar)
Neobee M-20®(9)
5 to 401 °F (-15 to 205 °C)
Propylene Glycol and Water
5 to 203 °F (-15 to 95 °C)
10000 psig (689,5 bar)
In-Line Sensor Module
(3051S_T, 3051SAM_ _T or E)
Temperature Limits
Ambient
-40 to 185 °F (-40 to 85 °C)
With LCD display(1): -40 to 175 °F (-40 to 80 °C)
With option code P0: -20 to 185 °F (-29 to 85 °C)
(1) LCD display may not be readable and LCD updates will be slower at
temperatures below -4 °F (-20 °C).
Storage
-50 to 185 °F (-46 to 85 °C)
With LCD display: -40 to 185 °F (-40 to 85 °C)
With Wireless Output: -40 to 185 °F (-40 to 85 °C)
(1) Process temperatures above 185 °F (85 °C) require derating the
ambient limits by a 1.5:1 ratio. For example, for process temperature
of 195 °F (91 °C), new ambient temperature limit is equal to 170 °F (77
°C). This can be determined as follows:
(195 °F - 185 °F) x 1.5 = 15 °F,
185 °F - 15 °F = 170 °F
(2) 212 °F (100 °C) is the upper process temperature limit for DP Range 0.
(3) 220 °F (104 °C) limit in vacuum service; 130 °F (54 °C) for pressures
below 0.5 psia.
(4) -20 °F (-29 °C) is the lower process temperature limit with option code
P0.
(5) 32 °F (0 °C) is the lower process temperature limit for DP Range 0.
(6) For 3051S_C, 160 ° F (71 °C) limit in vacuum service.
For 3051SMV_ _ 1, 2, 140 ° F (60 °C) limit in vacuum service.
(7) Not available for 3051S_CA.
(8) Upper temperature limit is 464 °F (240 °C) for a 2-in. direct-mount
extension, 500 °F (260 °C) for a 4-in. direct-mount extension, and 599
°F (315 °C) for an In-Line Thermal Optimizer direct-mount
connection.
(9) Upper temperature limit is 437 °F (225 °C) for a 2-in. direct-mount
extension or greater.
www.rosemount.com
95
Rosemount 3051S Series
January 2013
Humidity Limits
Safety-Certified Transmitter Failure Values(1)
0–100% relative humidity
Device Safety accuracy: ± 2.0% of analog output span (2)
Device Safety response time: 1.5 seconds
Turn-On Time(1)
When power is applied to the transmitter during startup,
performance will be within specifications per the time period
described below:
Transmitter
Turn-On Time (Typical)
3051S, 3051SF_D, 3051SAL_ _C
Diagnostics
3051SMV, 3051SF_1-7
3051S ERS System
2 seconds
5 seconds
5 seconds
6 seconds
(1) Does not apply to wireless option code X.
(2) Trip values in the DCS or safety logic solver should be derated by this
device safety accuracy.
Physical Specifications
Electrical Connections
1
/2–14 NPT, G1/2, and M20 × 1.5 conduit. HART interface connections
fixed to terminal block for Output code A and X.
(1) Does not apply to wireless option code X.
Process Connections
Volumetric Displacement
Coplanar Sensor Module
(3051S_C, 3051SMV, 3051SF, 3051SAM_ _G or A)
Less than 0.005 in3 (0,08 cm3)
Damping(1)
Analog output response time to a step change is user-selectable
from 0 to 60 seconds for one time constant. For 3051SMV,
3051SF_1-7, each variable can be individually adjusted. Software
damping is in addition to sensor module response time.
Standard
Flange
Adapters
G11 Code
Failure Mode Alarm
H11 Code
4-20 mA HART (output option code A)
If self-diagnostics detect a gross transmitter failure, the analog signal
will be driven offscale to alert the user. Rosemount standard (default),
NAMUR, and custom alarm levels are available (see Alarm
Configuration below).
High or low alarm signal is software-selectable or hardware-selectable
via the optional switch (option D1).
FF Seal
EF Seal
Alarm Configuration
RF Seal
High Alarm
Low Alarm
Default
21.75 mA
3.75 mA
NAMUR compliant(1)
22.5 mA
3.6 mA
Custom levels(2) (3)
20.2 - 23.0 mA
3.4 - 3.8 mA
1/2-14 NPT and RC 1/2 on 2-in. (50.8 mm), 2 1/8-in.
(54.0 mm), or 2 1/4-in. (57.2 mm) centers
In-Line Sensor Module
(3051S_T, 3051SAM_ _T or E)
Standard
F11 Code
(1) Does not apply to wireless option code X.
1/4-18 NPT on 2 1/8-in. centers
1
/2-14 NPT Female
Non-threaded instrument flange (available in SST
for sensor ranges 1-4 only)
G 1/2 A DIN 16288 male (available in SST for sensor
ranges 1-4 only)
Autoclave type F-250C (Pressure relieved 9/16-18
gland thread; 1/4 OD high pressure tube 60° cone;
available in SST for sensor range 5 only)
Level Transmitter
(3051SAL)
RT Seal
SC Seal
SS Seal
2-in. (DN 50), 3-in. (DN 80), or 4-in. (DN 100); ANSI
Class 150, 300, or 600 flange; JIS 10K, 20K, or 40K
flange; PN 10/16 or PN 40 flange
1-in. (DN 25) or 1.5-in. (DN 40); ANSI Class 150, 300,
or 600 flange; JIS 10K, 20K, or 40K flange; PN 40
flange
1/4-18, 1/2-14, 3/4-14, or 1-11.5 NPT Female
1.5-in, 2-in, or 3-in. Hygienic Tri-Clover Style
Tri-Clamp
4-in. Hygienic Tank Spud
(1) Analog output levels are compliant with NAMUR
recommendation NE 43, see option codes C4 or C5.
(2) Low alarm must be 0.1 mA less than low saturation and high
alarm must be 0.1 mA greater than high saturation.
(3) For 3051SMV and option code DA2, low alarm custom values
are 3.6 - 3.8 mA.
96
www.rosemount.com
January 2013
Rosemount 3051S Series
Process-Wetted Parts
Seal Fill Fluid (Liquid Level Only)
Process Isolating Diaphragms
3051SAL: Syltherm XLT, Silicone 704, Silicone 200, inert, glycerin and
water, Neobee M-20, propylene glycol and water.
Coplanar Sensor Module
(3051S_C, 3051SMV)
316L SST (UNS S31603), Alloy C-276 (UNS N10276), Alloy 400
(UNS N04400), Tantalum (UNS R05440), Gold-Plated Alloy 400,
Gold-plated 316L SST
B11 Code
Low side process connection is SST
In-Line Sensor Module
(3051S_T)
316L SST (UNS S31603), Alloy C-276 (UNS N10276)
Level Transmitter
(3051SAL)
FF Seal
EF Seal
RF Seal
RT Seal
SC Seal
SS Seal
316L SST, Alloy C-276, Tantalum
Paint for Aluminum Housing
Polyurethane
Cover O-rings
Buna-N
Wireless Antenna
External Antenna (WK / WM): PBT/PC integrated omnidirectional
antenna
Remote Antenna (WN): Fiberglass omnidirectional antenna
Power Module
Field replaceable, keyed connection eliminates the risk of incorrect
installation, Intrinsically Safe Lithium-thionyl chloride Power Module
with PBT enclosure
316L SST, Alloy C-276
Drain/Vent Valves
316 SST, Alloy C-276, or Alloy 400/K-500(1) material
(Drain vent seat: Alloy 400, Drain vent stem: Alloy K-500)
(1) Alloy 400/K-500 is not available with 3051SAL.
Process Flanges and Flange Adapters
Plated carbon steel
SST: CF-8M (Cast 316 SST) per ASTM A743
Cast C-276: CW-12MW per ASTM A494
Cast Alloy 400: M-30C per ASTM A494
Wetted O-rings
Glass-filled PTFE
(Graphite-filled PTFE with Isolating Diaphragm code 6)
3051SAL Mounting Flange
Zinc-cobalt plated CS or 316 SST
3051SAL Seal Extension
CF-3M (Cast 316L SST, material per ASTM A743) or
CW-12MW (Cast C-276, material per ASTM A494)
Non-Wetted Parts
Electronics Housing
Low-copper aluminum alloy or CF-8M (Cast 316 SST)
NEMA 4X, IP 66, IP 68 (66 ft (20 m) for 168 hours)
Note: IP 68 not available with Wireless Output.
Coplanar Sensor Module Housing
SST: CF-3M (Cast 316L SST)
Bolts
Plated carbon steel per ASTM A449, Type 1
Austenitic 316 SST per ASTM F593
ASTM A453, Class D, Grade 660 SST
ASTM A193, Grade B7M alloy steel
ASTM A193, Class 2, Grade B8M SST
Alloy K-500
Sensor Module Fill Fluid
Silicone or inert halocarbon (Inert is not available with 3051S_CA).
In-Line series uses Fluorinert® FC-43.
www.rosemount.com
97
Rosemount 3051S Series
January 2013
Shipping Weights
Sensor Module Weights
Coplanar Sensor Module(1)
3.1 lb (1,4 kg)
In-Line Sensor Module
1.4 lb (0,6 kg)
(1) Flange and bolts not included.
Transmitter Weights(1)
Transmitter with Coplanar Sensor Module (3051S_C, 3051SMV, 3051SAM_ _G or A)
Junction Box housing, SST Flange
PlantWeb housing, SST Flange
Wireless PlantWeb housing, SST Flange
6.3 lb (2,8 kg)
6.7 lb (3,1 kg)
7.3 lb (3,3 kg)
Transmitter with In-Line Sensor Module (3051S_T, 3051SAM_ _T or E)
Junction Box housing
PlantWeb housing
Wireless PlantWeb housing
3.2 lb (1,4 kg)
3.7 lb (1,7 kg)
4.2 lb (1,9 kg)
(1) Fully functional transmitter with sensor module, housing, terminal block, and covers. Does not include LCD display.
Transmitter Option Weights
Option Code
1J, 1K, 1L
2J
7J
2A, 2B, 2C
1A, 1B, 1C
M5
B4
B1, B2, B3
B7, B8, B9
BA, BC
B4
F12, F22
F13, F23
E12, E22
F14, F24
F15, F25
G21
G22
G11
G12
G31
G41
Option
SST PlantWeb housing
SST Junction Box housing
SST Quick Connect
Aluminum Junction Box housing
Aluminum PlantWeb housing
LCD Display for Aluminum PlantWeb housing(1),
LCD Display for SST PlantWeb housing(1)
SST Mounting Bracket for Coplanar Flange
Mounting Bracket for Traditional Flange
Mounting Bracket for Traditional Flange with SST Bolts
SST Bracket for Traditional Flange
SST Mounting Bracket for In-Line
SST Traditional Flange with SST Drain Vents(2)
Cast C-276 Traditional Flange with Alloy C-276 Drain Vents(2)
SST Coplanar Flange with SST Drain Vents(2)
Cast Alloy 400 Traditional Flange with Alloy 400/K-500 Drain Vents(2)
SST Traditional Flange with Alloy C-276 Drain Vents(2)
Level Flange—3 in., 150
Level Flange—3 in., 300
Level Flange—2 in., 150
Level Flange—2 in., 300
DIN Level Flange, SST, DN 50, PN 40
DIN Level Flange, SST, DN 80, PN 40
Add lb (kg)
3.5 (1,6)
3.4 (1,5)
0.4 (0,2)
1.1 (0,5)
1.1 (0,5)
0.8 (0,4)
1.6 (0,7)
1.2 (0,5)
1.7 (0,8)
1.7 (0,8)
1.6 (0,7)
1.3 (0,6)
3.2 (1,5)
3.6 (1,6)
1.9 (0,9)
3.6 (1,6)
3.2 (1,5)
12.6 (5,7)
15.9 (7,2)
6.8 (3,1)
8.2 (3,7)
7.8 (3,5)
13.0 (5,9)
(1) Includes LCD display and display cover.
(2) Includes mounting bolts.
98
www.rosemount.com
January 2013
Rosemount 3051S Series
Item
Weight in lb. (kg)
Aluminum Standard Cover
0.4 (0,2)
SST Standard Cover
1.3 (0,6)
Aluminum Display Cover
0.7 (0,3)
SST Display Cover
1.5 (0,7)
Wireless Extended Cover
0.7 (0,3)
LCD Display(1)
0.1 (0,04)
Junction Box Terminal Block
0.2 (0,1)
PlantWeb Terminal Block
0.2 (0,1)
Power Module
0.5 (0,2)
(1) Display only.
Table 18. 3051SAL Weights Without SuperModule Platform, Housing, or Transmitter Options
Flange
2-in., 150
3-in., 150
4-in., 150
2-in., 300
3-in., 300
4-in., 300
2-in., 600
3-in., 600
DN 50 / PN 40
DN 80 / PN 40
DN 100 / PN 10/16
DN 100 / PN 40
www.rosemount.com
Flush
lb. (kg)
9.5 (4,3)
15.7 (7,1)
21.2 (9,6)
11.3 (5,1)
19.6 (8,9)
30.4 (13.8)
12.8 (5,8)
22.1 (10,0)
11.3 (5,1)
16.0 (7,3)
11.2 (5,1)
12.6 (5,7)
2-in. Ext.
lb (kg)
—
16.4 (7,4)
20.9 (9,5)
—
20.3 (9,2)
30.3 (13,7)
—
22.8 (10,3)
—
16.7 (7,6)
11.9 (5,4)
13.3 (6,0)
4-in. Ext.
lb (kg)
—
17.6 (8,0)
22.1 (10,0)
—
21.5 (9,8)
31.5 (14,3)
—
24.0 (10,9)
—
17.9 (8,1)
13.1 (5,9)
14.5 (6,6)
6-in. Ext.
lb (kg)
—
18.9 (8,6)
23.4 (10,6)
—
22.8 (10,3)
32.8 (14,9)
—
25.3 (11,5)
—
19.2 (8,7)
14.4 (6,5)
15.8 (7,1)
99
Rosemount 3051S Series
January 2013
Rosemount 3051S Certifications
Approved Manufacturing Locations
Rosemount Inc. — Chanhassen, Minnesota USA
Emerson Process Management GmbH & Co. — Wessling, Germany
Emerson Process Management Asia Pacific Private Limited — Singapore
Beijing Rosemount Far East Instrument Co., LTD — Beijing, China
Emerson Process Management LTDA — Sorocaba, Brazil
Emerson Process Management (India) Pvt. Ltd. — Mumbai, India
Emerson Process Management, Emerson FZE — Dubai, United Arab
Emirates
HART & FOUNDATION Fieldbus
Hazardous Locations Certifications
North American Certifications
FM Approvals
E5
Ordinary Location Certification for FM
As standard, the transmitter has been examined and tested to
determine that the design meets basic electrical, mechanical, and fire
protection requirements by FM, a nationally recognized testing
laboratory (NRTL) as accredited by the Federal Occupational Safety and
Health Administration (OSHA).
American Bureau of Shipping (ABS) Type Approval
SBS
Certificate Number: 00-HS145383/1-PDA
Intended Service: Measurement of Pressure, Flow and Level for
Liquid, Gas and Vapor Applications on ABS Classed Vessels, Marine
and Offshore Installations
ABS Rule: 2008 Steel Vessels Rules 1-1-4/7.7, 4-8-3/1.7
I5/IE Intrinsically Safe for use in Class I, Division 1, Groups A, B, C, and D,
T4 (Ta = 70 °C for output options A or X; Ta = 60 °C for output
option F); Class II, Division 1, Groups E, F, and G; Class III, Division
1; Class I, Zone 0 AEx ia IIC T4 (Ta = 70 °C for output options A or X;
Ta = 60 °C for output option F) when connected in accordance
with Rosemount drawing 03151-1006; Non-Incendive for Class I,
Division 2, Groups A, B, C, and D; T4 (Ta = 70 °C for output options
A or X;
Ta = 60 °C for output option F) Enclosure Type 4X
For entity parameters see control drawing 03151-1006.
Canadian Standards Association (CSA)
European Directive Information
All CSA hazardous approved transmitters are certified per
ANSI/ISA 12.27.01-2003.
The EC declaration of conformity for all applicable European directives
for this product can be found at www.rosemount.com. A hard copy may
be obtained by contacting an Emerson Process Management
representative.
ATEX Directive (94/9/EC)
Emerson Process Management complies with the
ATEX Directive.
European Pressure Equipment Directive (PED) (97/23/EC)
Models 3051S_CA4; 3051S_CD2, 3, 4, 5; (also with P9 option)
Pressure Transmitters — QS Certificate of Assessment EC No. 59552-2009-CE-HOU-DNV, Module H Conformity Assessment
All other Model 3051S Pressure Transmitters
— Sound Engineering Practice
Transmitter Attachments: Diaphragm Seal - Process Flange Manifold — Sound Engineering Practice
Primary Elements, Flowmeter
— See appropriate Primary Element QIG
Electro Magnetic Compatibility (EMC) (2004/108/EC)
EN 61326-1:2006
EN 61326-2-3:2006
Explosion-proof for Class I, Division 1, Groups B, C, and D, T5 (Ta =
85 °C); Dust Ignition-proof for Class II and Class III, Division 1,
Groups E, F, and G, T5 (Ta = 85 °C); hazardous locations; enclosure
Type 4X, conduit seal not required when installed according to
Rosemount drawing 03151-1003.
E6
Explosion-proof for Class I, Division 1, Groups B, C, and D; Dust
Ignition-proof for Class II and Class III, Division 1, Groups E, F, and
G; suitable for Class I, Division 2, Groups A, B, C, and D, when
installed per Rosemount drawing 03151-1013, CSA Enclosure
Type 4X; conduit seal not required; Dual Seal.
I6/IF Intrinsically Safe for Class I, Division 1, Groups A, B, C, and D when
connected in accordance with Rosemount drawings 03151-1016;
Dual Seal.
For entity parameters see control drawing 03151-1016.
European Certifications
I1/IA ATEX Intrinsic Safety
Certificate No.: BAS01ATEX1303X
II 1G
Ex ia IIC T4 (Ta = -60 °C to 70 °C) -HART/Remote Display/Quick
Connect/HART Diagnostics
Ex ia IIC T4 (Ta = -60 °C to 70 °C) -FOUNDATION fieldbus
Ex ia IIC T4 (Ta = -60 °C to 70 °C) -FISCO
1180
Table 19. Input Parameters
Loop /
Power
Ui = 30 V
Ui = 17.5 V
Ii = 300 mA
Ii = 380 mA
Pi = 1.0 W
Pi = 1.3 W
Pi = 5.32 W
100
Groups
HART / FOUNDATION fieldbus/ Remote Display /
Quick Connect / HART Diagnostics
FISCO
HART / FOUNDATION fieldbus/ Remote Display /
Quick Connect / HART Diagnostics
FISCO
HART / Remote Display / Quick Connect / HART
Diagnostics
FOUNDATION fieldbus
FISCO
www.rosemount.com
January 2013
Table 19. Input Parameters
Loop /
Power
Ci = 30 nF
Ci = 11.4 nF
Ci = 0
Li = 0
Li = 60 μH
Rosemount 3051S Series
E1
Groups
SuperModule Platform
HART / HART Diagnostics / Quick Connect
FOUNDATION fieldbus / Remote Display / FISCO
HART / FOUNDATION fieldbus/ FISCO / Quick
Connect / HART Diagnostics
Remote Display
1. The Ex d blanking elements, cable glands and wiring shall be
suitable for a temperature of 90 °C.
2. The 3051S SuperModule contains a thin wall diaphragm.
Installation, maintenance and use shall take into account the
environmental conditions to which the diaphragm will be
subjected. The manufacturer's instructions for maintenance shall
be followed in detail to assure safety during its expected lifetime.
Ui = 5 Vdc
Ii = 500 mA
Pi = 0.63 W
3. In case of repair, contact the manufacturer for information on the
dimensions of the flameproof joints.
Special conditions for safe use (x)
1. The apparatus, excluding the Types 3051 S-T and 3051 S-C
not capable of withstanding the 500V test as defined in Clause
6.4.12 of EN 60079-11. This must be considered during
installation.
2. The terminal pins of the Types 3051 S-T and 3051 S-C must be
protected to IP20 minimum.
N1
ATEX Type n
Certificate No.: BAS01ATEX3304X
II 3 G
Ex nL IIC T4 (Ta = -40 °C TO 70 °C)
Ui = 45 Vdc max
Ci = 11.4 nF (Transmitter Output Option A)
Ci = 0 (Transmitter Output Option F)
Li = 0
For remote display, Ci = 0, Li = 60 ì H
IP66
Japanese Certifications
E4
TIIS Flameproof
Ex d IIC T6
Certificate
Description
TC15682
TC15683
Coplanar with Junction Box housing
Coplanar with PlantWeb housing
Coplanar with PlantWeb housing
and LCD Display
In-Line SST with Junction Box housing
In-Line Alloy C-276 with Junction Box housing
In-Line SST with PlantWeb housing
In-Line Alloy C-276 with PlantWeb housing
In-Line SST with PlantWeb housing
and LCD Display
In-Line Alloy C-276 with PlantWeb housing and
LCD Display
Remote Display
3051SFA/C/P SST/Alloy C-276 with
PlantWeb housing and LCD Display
3051SFA/C/P SST/Alloy C-276 with
PlantWeb housing and Remote Display
3051SFA/C/P SST/Alloy C-276 with
Junction Box housing
TC15684
TC15685
TC15686
TC15687
TC15688
TC15689
TC15690
Special conditions for safe use (x)
The apparatus is not capable of withstanding the 500V insulation
test required by Clause 6.8.1 of EN 60079-15.
This must be taken into account when installing the apparatus.
NOTE
RTD Assembly is not included with the 3051SFx Type n Approval.
II 1/2 G
Special conditions for safe use (x)
RTD Assembly (3051SFx Option T or R)
(In-line and Coplanar SuperModule Platforms respectively), is
ATEX Flameproof
Certificate No.: KEMA00ATEX2143X
Ex d IIC T6 (-50 °C  Tamb  65 °C)
Ex d IIC T5 (-50 °C  Tamb  80 °C)
Vmax = 42.4V
1180
TC17102
TC17099
TC17100
TC17101
China Certifications
ND
ATEX Dust
Certificate No.: BAS01ATEX1374X
II 1 D
Ex tD A20 IP66 T105°C (-20 °C  Tamb  85 °C)
Vmax = 42.4 volts max
IP66
1180
Special conditions for safe use (x)
1. Cable entries must be used which maintain the ingress
protection of the enclosure to at least IP66.
2. Unused cable entries must be filled with suitable blanking plugs
which maintain the ingress protection of the enclosure to at
least IP66.
3. Cable entries and blanking plugs must be suitable for the
ambient range of the apparatus and capable of withstanding a
7J impact test.
4. The 3051S SuperModule must be securely screwed in place to
maintain the ingress protection of the enclosure. (The 3051S
SuperModule must be properly assembled to the 3051S
housing to maintain ingress protection.)
www.rosemount.com
E3
China Flameproof, Dust Ignition-proof
NEPSI Certificate No. (manufactured in Chanhassen, MN):
GYJ091035
Certificate No. (manufactured in Beijing, China, and Singapore):
GYJ111400X
Ex d IIC T5/T6
DIP A20 Ta105 °C IP66
NOTE
Refer to Appendix B of the 3051S Reference Manual (document number
00809-0100-4801) for Special Conditions for Safe Use.
I3
China Intrinsic Safety
NEPSI Certificate No. (manufactured in Chanhassen, MN):
GYJ081078
Certificate No. (manufactured in Beijing, China, and Singapore):
GYJ111400X
Ex ia IIC T4
101
Rosemount 3051S Series
January 2013
Special conditions for safe use (x)
Note
Refer to Appendix B of the 3051S Reference Manual (document number
00809-0100-4801) for Special Conditions for Safe Use.
Input Parameters
Loop /
Power
Ui = 30 V
Ii = 300 mA
Pi = 1.0 W
Pi = 1.3 W
Ci = 38 nF
Ci = 11.4 nF
Ci = 0
Li = 0
Li = 2.4 μH
Li = 58.2 μH
The apparatus, excluding the Types 3051S-T and 3051S-C (In-line
and Coplanar SuperModule Platforms respectively), is not capable
of withstanding the 500V test as defined in Clause 6.4.12 of
IEC60079-11. This must be considered during installation.
E2
Groups
HART / FOUNDATION fieldbus / Remote Display /
Quick Connect / HART Diagnostics
HART / FOUNDATION fieldbus / Remote Display /
Quick Connect / HART Diagnostics
HART / Remote Display / Quick Connect / HART
Diagnostics
FOUNDATION fieldbus
SuperModule Platform
HART / HART Diagnostics / Quick Connect
FOUNDATION fieldbus / Remote Display
SuperModule Platform / FOUNDATION fieldbus
HART / Quick Connect / HART Diagnostics
Remote Display
Special conditions for safe use (x)
1. This device contains a thin wall diaphragm. Installation,
maintenance, and use shall take into account the environmental
conditions to which the diaphragm will be subjected. The
manufacturer’s instructions for installation and maintenance
shall be followed in detail to assure safety during its expected
lifetime.
2. For ambient temperature above 60 ºC, cable wiring must have
minimum isolation temperature of 90 ºC, to be in accordance to
equipment operation temperature.
3. The accessory of cable entries or conduit must be certified as
flameproof and needs to be suitable for use conditions.
RTD Assembly (3051SFx Option T or R)
Ui = 5 Vdc
Ii = 500 mA
Pi = 0.63 W
N3
INMETRO Flameproof
Certificate number: CEPEL 03.0140X
(manufacturing in Chanhassen, MN and Singapore)
Certificate number: CEPEL 07.1413X
(manufacturing in Brazil)
INMETRO Marking: Ex d IIC T* Gb IP66W
4. Where electrical entry is via conduit, the required sealing device
must be assembled immediately close to enclosure.
IECEx Certifications
China Type n - Energy Limited
NEPSI Certificate No.: GYJ101112X
Ex nL IIC T5 (-40 °C Ta  70 °C)
IP66
Loop /
Power
Transmitter Output
Ui = 30 V
HART / FOUNDATION fieldbus
Ii = 300 mA
HART / FOUNDATION fieldbus
Pi = 1.0 W
HART
Pi = 1.3 W
FOUNDATION fieldbus
Ci = 11.4 nF
HART
Ci = 0 nF
FOUNDATION fieldbus
Li = 0 μH
HART(1) / FOUNDATION fieldbus
(1) For remote meter option (M7, M8, M9), Li = 60 μH.
E7
IECEx Flameproof and Dust (each listed separately)
IECEx Flameproof
Certificate No.: IECExKEM08.0010X
Ex d IIC T5 or T6 Ga/Gb
T6 (-50 °C  Tamb  65 °C)
T5 (-50 °C  Tamb  80 °C)
Vmax = 42.4V
Special conditions for safe use (x)
1. The Ex d blanking elements, cable glands and wiring shall be
suitable for a temperature of 90 °C.
2. The 3051S SuperModule contains a thin wall diaphragm.
Installation, maintenance and use shall take into account the
environmental conditions to which the diaphragm will be
subjected. The manufacturer's instructions for maintenance shall
be followed in detail to assure safety during its expected lifetime.
3. In case of repair, contact the manufacturer for information on the
dimensions of the flameproof joints.
NOTE
Refer to Appendix B of the 3051S Reference Manual (document number
00809-0100-4801) for Special Conditions for Safe Use.
Brazil Certifications
I2
INMETRO Intrinsic Safety
IECEx Dust
Certificate No. IECExBAS09.0014X
Ex tD A20 IP66 T105 °C (-20 °C  Ta  85 °C)
Vmax = 42.4 V
A = 22 mA
IP66
Certificate number: CEPEL 05.0722X
(manufacturing in Chanhassen, MN and Singapore)
Certificate number: CEPEL 03.0140X
(manufacturing in Brazil)
INMETRO Marking: Ex ia IIC T4 Ga IP66W
102
www.rosemount.com
January 2013
Rosemount 3051S Series
Special conditions for safe use (x)
N7
1. Cable entries must be used which maintain the ingress protection
of the enclosure to at least IP66.
2. Unused cable entries must be filled with suitable blanking plugs
which maintain the ingress protection of the enclosure to at least
IP66.
3. Cable entries and blanking plugs must be suitable for the ambient
range of the apparatus and capable of withstanding a 7J impact
test.
4. The 3051S SuperModule must be securely screwed in place to
maintain the ingress protection of the enclosure. (The 3051S
SuperModule must be properly assembled to the 3051S housing
to maintain ingress protection.)
I7/IG IECEx Intrinsic Safety
Certificate No.: IECExBAS04.0017X
Ex ia IIC T4 (Ta = -60 °C to 70 °C) -HART/Remote Display/Quick
Connect/HART Diagnostics
Ex ia IIC T4 (Ta = -60 °C to 70 °C) -FOUNDATION fieldbus
Ex ia IIC T4 (Ta = -60 °C to 70 °C) -FISCO
IP66
Input Parameters
Loop / Power
Ui = 30 V
Ui = 17.5 V
Ii = 300 mA
Ii = 380 mA
Pi = 1.0 W
Pi = 1.3 W
Pi = 5.32 W
Ci = 30 nF
Ci = 11.4 nF
Ci = 0
Li = 0
Li = 60 H
Groups
HART / FOUNDATION fieldbus/ Remote
Display / Quick Connect / HART
Diagnostics
FISCO
HART / FOUNDATION fieldbus/ Remote
Display / Quick Connect / HART
Diagnostics
FISCO
HART / Remote Display / Quick Connect /
HART Diagnostics
FOUNDATION fieldbus
FISCO
SuperModule Platform
HART / HART Diagnostics / Quick
Connect
FOUNDATION fieldbus / Remote Display /
FISCO
HART / FOUNDATION fieldbus/ FISCO /
Quick Connect / HART Diagnostics
Remote Display
IECEx Type n
Certificate No.: IECExBAS04.0018X
Ex nC IIC T4 (-40 °C  Ta  +70 °C)
IP66
Special conditions for safe use (x)
The apparatus is not capable of withstanding the 500 V insulation
test required by Clause 8 of IEC 60079-15:1987.
Combinations of Certifications
Stainless steel certification tag is provided when optional approval is
specified. Once a device labeled with multiple approval types is
installed, it should not be reinstalled using any other approval
types. Permanently mark the approval label to distinguish it from
unused approval types.
K1
Combination of E1, I1, N1, and ND
K2
Combination of E2 and I2
K5
Combination of E5 and I5
K6
Combination of E6 and I6
K7
Combination of E7, I7, and N7
KA
Combination of E1, I1, E6, and I6
KB
Combination of E5, I5, I6, and E6
KC
Combination of E5, E1, I5, and I1
KD
Combination of E5, I5, E6, I6, E1, and I1
KG
Combination of IE, IF, IA, and IG
RTD Assembly (3051SFx Option T or R)
Ui = 5 Vdc
Ii = 500 mA
Pi = 0.63 W
Special conditions for safe use (x)
1.
The 3051S 4-20 mA HART, 3051S FOUNDATION fieldbus, and 3051S
FISCO are not capable of withstanding the 500V test as defined in
clause 6.4.12 of IEC 60079-11. This must be taken into account
during installation.
2.
The terminal pins of the Types 3051S-T and 3051S-C must be
protected to IP20 minimum.
www.rosemount.com
103
Rosemount 3051S Series
January 2013
Rosemount 3051S Wireless Certifications
3051S WirelessHART Product Certifications
Approved Manufacturing Locations
Rosemount Inc. — Chanhassen, Minnesota USA
Fisher-Rosemount GmbH & Co. — Wessling, Germany
Emerson Process Management Asia Pacific Private Limited —
Singapore
Beijing Rosemount Far East Instrument Co., LTD — Beijing, China
European Certifications
I1
Telecommunication Compliance
All wireless devices require certification to ensure that they
adhere to regulations regarding the use of the RF spectrum.
Nearly every country requires this type of product certification.
Emerson is working with governmental agencies around the
world to supply fully compliant products and remove the risk of
violating country directives or laws governing wireless device
usage.
FCC and IC
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following conditions: This device may not cause
harmful interference. This device must accept any interference
received, including interference that may cause undesired
operation. This device must be installed to ensure a minimum
antenna separation distance of 20 cm from all persons.
Special conditions for safe use (x)
The surface resistivity of the antenna is greater than one gigaohm.
To avoid electrostatic charge build-up, it must not be rubbed or
cleaned with solvents or a dry cloth.
IECEx Certifications
I7
North American Certifications
FM Approvals
I5
FM Intrinsically Safe, Non-Incendive, and Dust Ignition-proof.
Intrinsically Safe for Class I/II/III, Division 1, Groups A, B, C, D, E, F,
and G.
Zone Marking: Class I, Zone 0, AEx ia llC
Temperature Codes T4 (Tamb = -50 to 70 °C)
Non-Incendive for Class I, Division 2, Groups A, B, C, and D.
Dust Ignition-proof for Class II/III, Division 1, Groups E, F, and G.
For use with Emerson Process Management SmartPower
701PBKKF only.
Enclosure Type 4X / IP66
CSA - Canadian Standards Association
I6
104
CSA Intrinsically Safe
Intrinsically Safe for Class I, Division 1, Groups A, B, C, and D.
Temp Code T3C
Enclosure Type 4X / IP66
For use with Emerson Process Management SmartPower
701PBKKF only.
IECEx Intrinsic Safety
Certificate No.: IECEx BAS 04.0017X
Ex ia IIC T4 (-60 °C  Ta  70 °C)
For use with Emerson Process Management SmartPower
701PBKKF only.
IP66
Special conditions for safe use (x)
The surface resistivity of the antenna is greater than one gigaohm.
To avoid electrostatic charge build-up, it must not be rubbed or
cleaned with solvents or a dry cloth.
Ordinary Location Certification for FM
As standard, the transmitter has been examined and tested to
determine that the design meets basic electrical, mechanical, and
fire protection requirements by FM, a nationally recognized
testing laboratory (NRTL) as accredited by the Federal
Occupational Safety and Health Administration (OSHA).
ATEX Intrinsic Safety
Certificate No.: BAS01ATEX1303X
II 1G
Ex ia IIC T4 (-60 °C  Ta  70 °C)
For use with Emerson Process Management SmartPower
701PBKKF only.
IP66
1180
Japanese Certifications
I4
TIIS Intrinsic Safety
Ex ia IIC T4
Table 20. TIIS Certificates
Certificate
Description
TC18649
TC18657
TC18650
3051S_CD/CG/LD/LG
3051SFA/SFC/SFP
3051S_CA/TA/TG/LA
China (NEPSI) Certifications
I3
China Intrinsic Safety
Certificate No. (manufactured in Chanhassen, MN): GYJ081078
Certificate No. (manufactured in Beijing, China): GYJ06367
Certificate No. (manufactured in Singapore): GYJ06365
Ex ia IIC T4
For use with Emerson Process Management SmartPower
701PBKKF only.
Special Conditions for Safe Use (X)
Refer to Appendix B of the 3051S Wireless HART Reference
Manual (document number 00809-0200-4802) for Special
Conditions for Safe Use.
www.rosemount.com
January 2013
Rosemount 3051S Series
Rosemount 3051S MultiVariable Certifications
Approved Manufacturing Locations
Canadian Standards Association (CSA)
All CSA hazardous approved transmitters are certified per
ANSI/ISA 12.27.01-2003.
Rosemount Inc. — Chanhassen, Minnesota USA
Emerson Process Management GmbH & Co. — Wessling, Germany
Emerson Process Management Asia Pacific Private Limited — Singapore
E6
Explosion-proof for Class I, Division 1, Groups B, C, and D;
Dust-Ignition-Proof for Class II and Class III, Division 1, Groups E, F,
and G; suitable for Class I, Division 2, Groups A, B, C, and D, CSA
Enclosure Type 4X; conduit seal not required. Dual Seal. T5 (Ta =
-40 °C to 85 °C).
I6
Intrinsically Safe for Class I, Division 1, Groups A, B, C, and D, T3C;
when connected in accordance with Rosemount drawings
03151-1207; Dual Seal.
For entity parameters see control drawing 03151-1207.
Ordinary Location Certification for FM
As standard, the transmitter has been examined and tested to
determine that the design meets basic electrical, mechanical, and fire
protection requirements by FM, a nationally recognized testing
laboratory (NRTL) as accredited by the Federal Occupational Safety and
Health Administration (OSHA).
European Directive Information
The EC declaration of conformity for all applicable European directives
for this product can be found at www.rosemount.com. A hard copy may
be obtained by contacting an Emerson Process Management
representative.
American Bureau of Shipping (ABS) Type Approval
SBS
Certificate Number:09-HS383649C/1-PDA
Intended Service: Measurement of Pressure for Liquid, Gas and
Vapor applications on ABS Classed Vessels, Marine and Offshore
Installations
ABS Rule: 2009 Steel Vessels Rules 1-1-4/7.7, 4-6-2/5.15,
4-8-3/13.1
ATEX Directive (94/9/EC)
Emerson Process Management complies with the
ATEX Directive.
European Pressure Equipment Directive (PED) (97/23/EC)
Models with Differential Pressure Ranges = 2 through 5 and/or Static
Pressure Range 4 or options P0 and P9.
QS Certificate of Assessment - EC No. 59552-2009-CE-HOU-DNV,
Module H Conformity Assessment
— Sound Engineering Practice
Transmitter Attachments: Diaphragm Seal - Process Flange Manifold — Sound Engineering Practice
Primary Elements, Flowmeter
— See appropriate Primary Element QIG
European Certifications
I1
ATEX Intrinsic Safety
Certificate No.: Baseefa 08ATEX0064X
Ex ia IIC T4 (-60 °C  Tamb  +70 °C)
1180
Field Connection / 4-20 mA Loop Parameters
II 1G
Ui = 30 V
Ii = 300 mA
Pi = 1.0 W
Ci = 14.8 nF
Li = 0
RTD Connection Parameters
UO = 30 V
IO = 2.31 mA
PO = 17.32 mW
Ci = 0
Li = 0
Special conditions for safe use (x)
If the equipment is fitted with the optional 90 V transient
suppressor, it is incapable of withstanding the 500 V isolation from
earth test and this must be taken into account during installation.
N1
Electro Magnetic Compatibility (EMC) (2004/108/EC)
EN 61326-1:2006 and EN 61326-2-3:2006
ATEX Type n
Certificate No.: Baseefa 08ATEX0065X
Ex nA nL IIC T4 (-40 °C  Tamb  +70 °C)
Ui = 45 Vdc max
UO = 30 V (RTD Connection)
IP66
II 3 G
Hazardous Locations Certifications
North American Certifications
Special conditions for safe use (x)
If fitted with a 90 V transient suppressor, the equipment is not
capable of withstanding the 500 V electrical strength test as
FM Approvals
E5
I5
Explosion-proof for Class I, Division 1, Groups B, C, and D;
dust-ignition proof for Class II and Class III, Division 1, Groups E, F,
and G; Ta = 85 °C; hazardous locations; enclosure Type 4X, conduit
seal not required.
Intrinsically Safe for use in Class I, Division 1, Groups A, B, C, and D;
Class II, Division 1, Groups E, F, and G; Class III, Division 1; Class I,
Zone 0 AEx ia IIC when connected in accordance with Rosemount
drawing 03151-1206;
Ta = 70 °C;
Non-incendive for Class I, Division 2, Groups A, B, C, and D
Enclosure Type 4X
For entity parameters see control drawing 03151-1206.
www.rosemount.com
defined in Clause 6.8.1 of EN 60079-15:2005. This must be taken
into account during installation.
ND
ATEX Dust
Certificate No.: BAS01ATEX1374X
II 1 D
Ex tD A20 IP66 T105°C (-20 °C  Tamb  85 °C)
IP66
1180
105
Rosemount 3051S Series
January 2013
I2
Special conditions for safe use (x)
1. Cable entries must be used which maintain the ingress protection
of the enclosure to at least IP66.
2. Unused cable entries must be filled with suitable blanking plugs
which maintain the ingress protection of the enclosure to at least
IP66.
3. Cable entries and blanking plugs must be suitable for the ambient
temperature range of the apparatus and capable of withstanding
a 7J impact test.
4. The 3051S SuperModule must be securely screwed in place to
maintain the ingress protection of the enclosure.
E1
ATEX Flameproof
Certificate No.: KEMA00ATEX2143X
Ex d IIC T6 (-50 °C  Tamb  65 °C)
Ex d IIC T5 (-50 °C  Tamb  80 °C)
Vmax = 42.4V
1180
II 1/2 G
Special conditions for safe use (x)
INMETRO Intrinsic Safety
Certificate No: NCC 12.1158 X
Ex ia IIC T4 Ga
T4 (-60 °C  Tamb  +70 °C)
Field Connection / 4-20 mA Loop Parameters
Ui = 30 V
Ii = 300 mA
Pi = 1.0 W
Ci = 14.8 nF
Li = 0
RTD Connection Parameters
UO = 30 V
IO = 2.31 mA
PO = 17.32 mW
Ci = 0
Li = 0
Special conditions for safe use (x)
If the equipment is fitted with the optional 90 V transient
suppressor, it is incapable of withstanding the 500 V isolation
from earth test and this must be taken into account during
installation.
1. The Ex d blanking elements, cable glands and wiring shall be
suitable for a temperature of 90 °C.
2. Transmitter Model 3051S contains a thin wall diaphragm.
Installation, maintenance and use shall take into account the
environmental conditions to which the diaphragm will be
subjected. The manufacturer's instructions for maintenance shall
be followed in detail to assure safety during its expected lifetime.
China Certifications
E3
3. In case of repair, contact the manufacturer for information on the
dimensions of the flameproof joints.
Japanese Certifications
E4
TIIS Flameproof
Ex d IIC T6
TC19070 With RTD and LCD Display
TC19071 With LCD
TC19072 RTD without LCD Display
TC19073 Without LCD
Brazil Certifications
E2
INMETRO Flameproof
Certificate No.: NCC 12.1128 X
Ex d IIC T6/T5 Ga/Gb
T6 (-50 °C  Tamb  +65 °C)
T5 (-50 °C  Tamb  +80 °C)
Special conditions for safe use (x)
1. For processes with temperatures above 135°C, the user must
assess whether the temperature class of the SuperModule is
appropriate because in these appliances there is a risk of the
SuperModule temperature being above the T5 temperature class,
considering that this temperature is one function of the
ventilation type used on the equipment.
2. The Ex d blanking elements, cable glands and wiring shall be
suitable for a temperature of 90°C.
3. The 3051 transmitter contains a thin wall diaphragm. Installation,
maintenance and use shall take into account the environmental
conditions to which the diaphragm will be subjected. The
manufacturer's instructions for maintenance shall be followed in
detail to assure safety during its expected lifetime.
4. In case of repair, contact the manufacturer for information about
the dimensions of the flameproof joints.
106
China Flameproof
NEPSI Certificate No.: GYJ091001
Ex d IIC T5/T6
T6 (-50 °C to 65 °C)
T5 (-50 °C to 80 °C)
NOTE
Refer to Appendix B of the 3051S MultiVariable Reference Manual
(document number 00809-0100-4803) for Special Conditions for Safe
Use.
I3
China Intrinsic Safety
NEPSI Certificate No.: GYJ091002X
Ex ia IIC T4 (-60 °C to 70 °C)
Field Connection / 4-20 mA Loop Parameters
Ui = 30 V
Ii = 300 mA
Pi = 1.0 W
Ci = 14.8 nF
Li = 0
RTD Connection Parameters
UO = 30 V
IO = 2.31 mA
PO = 17.32 mW
Ci = 0
Li = 0
NOTE
Refer to Appendix B of the 3051S MultiVariable Reference Manual
(document number 00809-0100-4803) for Special Conditions for Safe
Use.
www.rosemount.com
January 2013
Rosemount 3051S Series
IECEx Certifications
K4
Combination of E4 and I4
I7
K5
Combination of E5 and I5
K6
Combination of E6 and I6
K7
Combination of E7, I7, and N7
KA
Combination of E1, E6, I1, and I6
KB
Combination of E5, E6, I5, and I6
KC
Combination of E5, E1, I5, and I1
KD
Combination of E5, E6, E1, I5, I6, and I1
IECEx Intrinsic Safety
Certificate No.: IECExBAS08.0025X
Ex ia IIC T4(-60 °C  Ta  70 °C)
IP66
Field Connection / 4-20 mA Loop Parameters
Ui = 30 V
Ii = 300 mA
Pi = 1.0 W
Ci = 14.8 nF
Li = 0
RTD Connection Parameters
UO = 30 V
IO = 2.31 mA
PO = 17.32 mW
Ci = 0
Li = 0
Special conditions for safe use (x)
If the equipment is fitted with the optional 90 V transient suppressor, it
is incapable of withstanding the 500 V isolation from earth test
and this must be taken into account during installation.
N7
IECEx Type n
Certificate No.: IECExBAS08.0026X
Ex nAnL IIC T4 (-40 °C  Ta  70 °C)
Ui = 45 Vdc MAX
UO = 30 V (RTD Connection)
IP66
Special conditions for safe use (x)
If fitted with a 90 V transient suppressor, the equipment is not capable of
withstanding the 500 V electrical strength test as defined in
Clause 6.8.1 of EN 60079-15:2005. This must be taken into
account during installation.
E7
IECEx Flameproof
Certificate No.: IECExKEM08.0010X
Ex d IIC T6 (-50 °C  Tamb  65 °C)
Ex d IIC T5 (-50 °C  Tamb  80 °C)
Special conditions for safe use (x)
1. The Ex d blanking elements, cable glands and wiring shall be
suitable for a temperature of 90 °C.
2. Transmitter Model 3051S contains a thin wall diaphragm.
Installation, maintenance and use shall take into account the
environmental conditions to which the diaphragm will be
subjected. The manufacturer's instructions for maintenance shall
be followed in detail to assure safety during its expected lifetime.
3. In case of repair, contact the manufacturer for information on the
dimensions of the flameproof joints.
Combinations of Certifications
Stainless steel certification tag is provided when optional
approval is specified. Once a device labeled with multiple
approval types is installed, it should not be reinstalled using any
other approval types. Permanently mark the approval label to
distinguish it from unused approval types.
K1
Combination of E1, I1, N1, and ND
www.rosemount.com
107
Rosemount 3051S Series
January 2013
3051S ERS System Certifications
Approved Manufacturing Locations
E6
Rosemount Inc. – Chanhassen, Minnesota, USA
Emerson Process Management GmbH & Co. – Wessling, Germany
Emerson Process Management Asia Pacific Private Limited – Singapore
Beijing Rosemount Far East Instrument Co., LTD – Beijing, China
Explosion-proof for Class I, Division 1, Groups B, C, and D; Dust
Ignition-Proof for Class II and Class III, Division 1, Groups E, F, and
G; suitable for Class I, Division 2, Groups A, B, C, and D, CSA
Enclosure Type 4X; conduit seal not required; Dual Seal.
I6
Intrinsically Safe for Class I, Division 1, Groups A, B, C, and D when
connected in accordance with Rosemount Drawings 03151-1316;
Dual Seal.
For entity parameters see control drawing 03151-1316.
Ordinary Location Certification for FM Approvals
As standard, the transmitter has been examined and tested to
determine that the design meets basic electrical, mechanical, and fire
protection requirements by FM, a nationally recognized testing
laboratory (NRTL) as accredited by the Federal Occupational Safety and
Health Administration (OSHA).
European Certifications
I1
ATEX Intrinsic Safety
Certificate No.: BAS01ATEX1303X
Ex ia IIC T4 (Ta = -60 °C to 70 °C)
1180
European Directive Information
The EC declaration of conformity for all applicable European directives
for this product can be found at www.rosemount.com. A hard copy may
be obtained by contacting an Emerson Process Management
representative.
ATEX Directive (94/9/EC)
Emerson Process Management complies with the
ATEX Directive.
European Pressure Equipment Directive (PED) (97/23/EC)
Models 3051S_CA4; 3051S_CD2, 3, 4, 5; (also with P9 option)
Table 21. Input Parameters
Loop / Power
Ui = 30 V
Ii = 300 mA
Pi = 1 W
Ci = 12 nF
Li = 33  H
Special Conditions for Safe Use (X)
The apparatus is not capable of withstanding the 500 V test as
defined in Clause 6.3.12 of EN 60079-11. This must be considered
during installation.
Pressure Transmitters — QS Certificate of Assessment EC No. 59552-2009-CE-HOU-DNV, Module H Conformity Assessment
All other Model 3051S Pressure Transmitters
II 1G
N1
— Sound Engineering Practice
Transmitter Attachments: Diaphragm Seal - Process Flange Manifold — Sound Engineering Practice
Primary Elements, Flowmeter
ATEX Type n
Certificate No.: BAS01ATEX3304X
Ex nL IIC T4 (Ta = -40 °C TO 70 °C)
Ui = 45 Vdc max
IP66
II 3 G
— See appropriate Primary Element QIG
Electro Magnetic Compatibility (EMC) (2004/108/EC)
Special conditions for safe use (x)
The apparatus is not capable of withstanding the 500 V insulation
test required by Clause 6.8.1 of EN 60079-15.
EN 61326-1:2006
EN 61326-2-3:2006
Hazardous Locations Certifications
North American Certifications
FM Approvals
E5
I5
Explosion-proof for Class I, Division 1, Groups B, C, and D; Dust
Ignition-proof for Class II and Class III, Division 1, Groups E, F, and
G; hazardous locations; enclosure Type 4X, conduit seal not
required.
Intrinsically Safe for use in Class I, Division 1, Groups A, B, C, and D;
Class II, Division 1, Groups E, F, and G; Class III, Division 1; Class I,
Zone 0 AEx ia IIC when connected in accordance with Rosemount
drawing 03151-1306; Non-Incendive for Class I, Division 2,
Groups A, B, C, and D Enclosure Type 4X
For entity parameters see control drawing 03151-1306.
Canadian Standards Association (CSA)
All CSA hazardous approved transmitters are certified per ANSI/ISA
12.27.01-2003.
108
This must be taken into account when installing the apparatus.
ND
ATEX Dust
Certificate No.: BAS01ATEX1374X
II 1 D
Ex tD A20 IP66 T105 °C (-20 °C  Tamb  85 °C)
Vmax = 42.4 V max
IP66
1180
Special Conditions for safe use (X):
1. Cable entries must be used which maintain the ingress protection
of the enclosure to at least IP66.
2. Unused cable entries must be filled suitable blanking plugs which
maintain the ingress protection of the enclosure to at least IP66.
3. Cable entries and blanking plugs must be suitable for the ambient
range of the apparatus and capable of withstanding a 7J impact
test.
4. Each 3051S ERS transmitter must be securely screwed in place to
maintain the ingress protection of the enclosure. (The 3051S
Super Module must be properly assembled to the 3051S housing
to maintain ingress protection.)
www.rosemount.com
January 2013
E1
ATEX Flameproof
Certificate No.: KEMA00ATEX2143X
Ex d IIC T6 (-50 °C  Tamb  65 °C)
Ex d IIC T5 (-50 °C  Tamb  80 °C)
Vmax = 42.4 V
1180
Rosemount 3051S Series
II 1/2 G
Special Conditions for safe use (X):
1. The Ex d blanking elements, cable glands and wiring shall be
suitable for a temperature of 90 °C.
2. Transmitter Model 3051S contains a thin wall diaphragm.
Installation, maintenance, and use shall take into account the
environmental conditions to which the diaphragm will be
subjected. The manufacturer's instructions for maintenance shall
be followed in detail to assure safety during its expected lifetime.
3. In case of repair, contact the manufacturer for information on the
dimensions of the flameproof joints.
Japanese Certifications
E4
NOTE
Refer to Appendix B of the 3051S ERS Reference Manual (document
number 00809-0100-4804) for Special Conditions for Safe Use.
I3
Maximum
input
voltage: Ui
(V)
Maximum
input
current:
Ii (mA)
Maximum
input
power:
Pi (W)
Maximum internal
parameters:
Ci (nF)
Li (  H)
30
300
1
12
33
INMETRO Flameproof
Certificate number: CEPEL 03.0140X
(manufacturing in Chanhassen, MN and Singapore)
Certificate number: CEPEL 07.1413X
(manufacturing in Brazil)
INMETRO Marking: Ex d IIC T5/T6 Gb IP66W
NOTE
Refer to Appendix B of the 3051S ERS Reference Manual (document
number 00809-0100-4804) for Special Conditions for Safe Use.
IECEx Certifications
I7
Special conditions for safe use (x)
1. This device contains a thin wall diaphragm. Installation,
maintenance, and use shall take into account the environmental
conditions to which the diaphragm will be subjected. The
manufacturer's instructions for installation and maintenance shall
be followed in detail to assure safety during its expected lifetime.
2. For ambient temperature above 60°C, cable wiring must have
minimum isolation temperature of 90° C, to be in accordance to
equipment operation temperature.
3. The accessory of cable entries or conduit must be certified as
flameproof and needs to be suitable for use conditions.
INMETRO Intrinsic Safety
Certificate number: CEPEL 05.0722X
(manufactured in Chanhassen, MN and Singapore)
Certificate number: CEPEL 07.1414X
(manufactured in Brazil)
INMETRO Marking: Ex ia IIC T4 Ga IP66W
Loop / Power
Ui = 30 V
Ii = 300 mA
Pi = 1 W
Ci = 12 nF
Li = 33  H
Special conditions for safe use (X)
The apparatus is not capable of withstanding the 500 V test as
defined in clause 6.3.12 of IEC 60079-11. This must be taken into
account during installation.
N7
IECEx Type n
Certificate No.: IECExBAS04.0018X
Ex nC IIC T4 (-40 °C  Ta  +70 °C)
Ui = 45 Vdc Max
IP66
Special conditions for safe use (x)
The apparatus is not capable of withstanding the 500 V insulation
test required by Clause 8 of IEC 60079-15:1987.
E7
IECEx Flameproof and Dust (each listed separately)
Special conditions for safe use (x)
The apparatus, excluding the Types 3051S-T and 3051S-C (In-line
and Coplanar SuperModule Platforms respectively), is not capable
of withstanding the 500V test as defined in Clause 6.4.12 of
IEC60079-11. This must be considered during installation.
China Certifications
E3
China Flameproof, Dust Ignition-proof
NEPSI Certificate No. (manufactured in Beijing, China):
GYJ101345X
Ex d II CT5/T6
www.rosemount.com
IECEx Intrinsic Safety
Certificate No.: IECExBAS04.0017X
Ex ia IIC T4 (Ta = -60 °C to 70 °C) -HART/Remote Display/Quick
Connect/HART Diagnostics
IP66
Table 22. Input Parameters
4. Where electrical entry is via conduit, the required sealing device
must be assembled immediately close to enclosure.
I2
China Intrinsic Safety, Dust Ignition-proof
NEPSI Certificate No. (manufactured in Beijing, China):
GYJ111265X
Ex ia IIC T4
TIIS Flameproof: Consult factory for availability
INMETRO Certifications
E2
(-50 °C  Ta  80 °C)
(-50 °C  Ta  65 °C)
T5
T6
IECEx Flameproof
Certificate No.: IECExKEM08.0010X
Ex d IIC T6 (-50 °C  Tamb  65 °C)
Ex d IIC T5 (-50 °C  Tamb  80 °C)
Vmax = 42.4 V
109
Rosemount 3051S Series
Special conditions for safe use (X)
1. The Ex d blanking elements, cable glands and wiring shall be
suitable for a temperature of 90 °C.
2. Transmitter Model 3051S contains a thin wall diaphragm.
Installation, maintenance, and use shall take into account the
environmental conditions to which the diaphragm will be
subjected. The manufacturer's instructions for maintenance shall
be followed in detail to assure safety during its expected lifetime.
3. In case of repair, contact the manufacturer for information on the
dimensions of the flameproof joints.
IECEx Dust
Certificate No. IECExBAS09.0014X
Ex tD A20 IP66 T105°C (-20 °C  Tamb  85 °C)
Vmax = 42.4 V
A = 22 mA
IP66
Special conditions for safe use (x)
1. Cable entries must be used which maintain the ingress protection
of the enclosure to at least IP66.
January 2013
Combinations of Certifications
Stainless steel certification tag is provided when optional
approval is specified. Once a device labeled with multiple
approval types is installed, it should not be reinstalled using any
other approval types. Permanently mark the approval label to
distinguish it from unused approval types.
K1
Combination of E1, I1, N1, and ND
K2
Combination of E2 and I2
K5
Combination of E5 and I5
K6
Combination of E6 and I6
K7
Combination of E7, I7, and N7
KA
Combination of E1, E6, I1, and I6
KB
Combination of E5, E6, I1, and I6
KC
Combination of E5, E1, I5, and I1
KD
Combination of E5, E6, E1, I5, I6, and I1
2. Unused cable entries must be filled with suitable blanking plugs
which maintain the ingress protection of the enclosure to at least
IP66.
3. Cable entries and blanking plugs must be suitable for the ambient
range of the apparatus and capable of withstanding a 7J impact
test.
4. Each 3051S ERS sensor must be securely screwed in place to
maintain the ingress protection of the enclosure. (Each sensor
module must be properly assembled to the housing to maintain
ingress protection.)
110
www.rosemount.com
January 2013
Rosemount 3051S Series
Dimensional Drawings
Figure 1. Transmitter with Coplanar Sensor Module and Flange
PlantWeb Housing
Junction Box Housing
Wireless Housing
Front View
Front View
Front View
4.20 (107)
Extended Range
External Antenna
4.20 (107)
External
Antenna
8.57
(217)
8.57
(217)
9.67
(245)
Side View
6.88
(174)
90°
11.16
(283)
4.20
(107)
9.67
(245)
Side View
Side View
3.45 (88)
4.51 (114)
3.55
(90.1)
6.71
(170)
6.05
(153)
7.72
(196)
8.57
(217)
9.67
(245)
6.55 (166)
6.55 (166)
6.55
(166)
Dimensions are in inches (millimeters)
www.rosemount.com
111
Rosemount 3051S Series
January 2013
Figure 2. Transmitter with Coplanar Sensor Module and Traditional Flange
PlantWeb Housing
Junction Box Housing
Wireless Housing
Front View
Front View
Front View
Extended Range
External Antenna
External
Antenna
6.88
(174)
9.30
(236)
9.30
(236)
3.40
(86)
1.10
(28)
Side View
4.20
(107)
3.40
(86)
1.10
(28)
3.40
(86)
Side View
90°
11.16
(283)
7.81
(198)
1.10
(28)
Side View
3.45 (88)
3.55
(90.1)
6.71
(170)
6.05
(155)
7.72
(196)
9.30
(236)
1.63 (41)
1.63 (41)
2.13 (54)
2.13
(54)
Dimensions are in inches (millimeters)
112
www.rosemount.com
January 2013
Rosemount 3051S Series
Figure 3. Transmitter with In-Line Sensor Module (For ranges 1A-4A, 1/2” NPT 316L SST process wetted
connection).
For detailed dimensions on other configurations, see Type I drawings at rosemount.com.
PlantWeb Housing
Junction Box Housing
Wireless Housing
Front View
Front View
Front View
Extended Range
External Antenna
4.20 (107)
4.20 (107)
External
Antenna
6.88
(174)
3.55
(90.1)
11.16
(283)
4.20
(107
8.04
(204)
8.04
(204)
Side View
90°
Side View
Side View
5.17
(131)
5.21 (132)
4.55 (116)
4.51
(114)
3.45
(88)
3.45 (88)
6.88
(174)
6.71
(170)
6.05
(155)
8.19
(208)
Dimensions are in inches (millimeters)
www.rosemount.com
113
Rosemount 3051S Series
January 2013
Figure 4.
High Gain, Remote Mount Antenna (WN option)
114
www.rosemount.com
January 2013
Rosemount 3051S Series
Figure 5. Coplanar Mounting Configurations (B4 Bracket)
Pipe Mount
Panel Mount
Front View
Front View
Front View
4.51 (114)
2.60 (66)
6.15
(156)
2.81
(71)
4.73 (120)
3.54 (90)
6.25 (159)
Dimensions are in inches (millimeters)
Figure 6. Traditional Mounting Configurations
Pipe Mount
Pipe Mount (Flat Bracket)
Panel Mount
10.71 (272)
2.62
(67)
8.10
(205)
8.10
(205)
0.93
(24)
2.62
(67)
3.40
(86)
3.40
(86)
4.85
(123)
7.70 (196)
Dimensions are in inches (millimeters)
www.rosemount.com
115
Rosemount 3051S Series
January 2013
Figure 7. In-Line Mounting Configurations (B4 Bracket)
Pipe Mount
Front View
Panel Mount
Side View
2.59
(65)
4.51 (114)
6.15
(156)
6.15
2.81
(71)
6.25
(159)
3.08
(78)
4.72 (120)
Dimensions are in inches (millimeters)
Figure 8. Remote Display Mounting Configurations (B4 Bracket)
Pipe Mount
Front View
Panel Mount
Side View
2.34
(59)
5.17 (131)
4.48
(114
2.66
(68)
2.66
(68)
8.72 (221)
6.15
(156)
4.72 (120)
3.08
(78)
6.25 (158)
Dimensions are in inches (millimeters)
116
www.rosemount.com
January 2013
Rosemount 3051S Series
Figure 9. Rosemount 3051SFA Annubar Flowmeter
Rosemount 3051SFA Annubar Flowmeter(1)
Front View
Side View
Top View
D
C
B
A
Dimensions are in inches (millimeters)
(1) The Pak-Lok Annubar model is available up to 600# ANSI (1440 psig at 100 °F (99 bar at 38 °C)).
Table 23. 3051CFA Annubar Flowmeter Dimensional Data
Sensor Size
A (Max)
B (Max)
C (Max)
D (Max)
1
2
3
8.50(215.9)
11.00(279.4)
12.00 (304.8)
17.10 (434.3)
19.60 (497.8)
20.60 (523.2)
8.66 (220.0)
8.66 (220.0)
8.66 (220.0)
7.00 (177.8)
7.00 (177.8)
7.00 (177.8)
Dimensions are in inches (millimeters)
www.rosemount.com
117
Rosemount 3051S Series
January 2013
Figure 10. Rosemount 3051SFC Compact Orifice Flowmeter
Rosemount 3051SFC Compact Orifice Flowmeter
Orifice Plate Front View
Orifice Plate Side View
Orifice Plate Top View
E
(Primary Element Type code P)
Compact Orifice Plate
D
B
C
A
F
1.13 (28.7)
(Primary Element Type code C)
Conditioning Orifice Plate
E
D
B
A
C
F
1.13 (28.7)
Dimensions are in inches (millimeters)
Table 24. Dimensional Drawings(1)
Primary(1)
Element Type
A
B
Type P and C
5.62 (143)
Transmitter
Height + A
Transmitter
Height
7.70 (196)
C
D
E
F
7.75 (197) - closed
8.25 (210) - open
6.00 (152) - closed
6.25 (159) - open
10.2 (257.8) - closed
10.4 (264.2) - open
Max of 7.2
(184)
(1) Measurement in inches (millimeters).
118
www.rosemount.com
January 2013
Rosemount 3051S Series
Figure 11. Rosemount 3051SFP Integral Orifice Flowmeter
Rosemount 3051SFP Integral Orifice Flowmeter
Front View
Bottom View
Side View
11.73
(297,9)
8.8 (223.46)
7.7 (195.6)
Flow
5.3
(134.14)
B.D.(2)
K(1) Downstream
J Upstream
Dimensions are in inches (millimeters)
Line Size
Dimension
J (Beveled/Threaded pipe ends)
J (RF slip-on, RTJ slip-on, RF-DIN slip on)
J (RF 150#, weld neck)
J (RF 300#, weld neck)
J (RF 600#, weld neck)
K (Beveled/Threaded pipe ends)
K (RF slip-on, RTJ slip-on, RF-DIN slip on)(1)
K (RF 150#, weld neck)
K (RF 300#, weld neck)
1/2-in. (15 mm)
1-in. (25 mm)
11/2-in. (40 mm)
12.54 (318.4)
12.62 (320.4)
14.37 (364.9)
14.56 (369.8)
14.81 (376.0)
5.74 (145.7)
5.82 (147.8)
7.57 (192.3)
7.76 (197.1)
20.24 (514.0)
20.32 (516.0)
22.37 (568.1)
22.63 (574.7)
22.88 (581.0)
8.75 (222.2)
8.83 (224.2)
10.88 (276.3)
11.14 (282.9)
28.44 (722.4)
28.52 (724.4)
30.82 (782.9)
31.06 (789.0)
31.38 (797.1)
11.91 (302.6)
11.99 (304.6)
14.29 (363.1)
14.53 (369.2)
(1) Downstream length shown here includes plate thickness of 0.162-in. (4.11 mm).
www.rosemount.com
119
Rosemount 3051S Series
January 2013
Figure 12. Rosemount 3051S Scalable Level Transmitter with FF Seal (Measurement in inches (millimeters))
Rosemount 3051S Scalable Level Transmitter with FF(1)(2)- Coplanar Style
5.17
(131)
4.51
(114)
8.57
(217,7)
+ Direct Mount
Extension Length
Rosemount 3051S Scalable Level Transmitter with FF(1)(2) - In-Line Style
5.17
(131)
8.04
(204)
(1) FF (FFW) seal dimensions and pressure ratings can be found in the Rosemount DP Level Transmitters and 1199 Remote Seals Product Data Sheet,
(00813-0100-4016).
(2) Lower housing (flushing ring) is available with FFW style flange.
120
www.rosemount.com
January 2013
Rosemount 3051S Series
Figure 13. Rosemount 3051S Scalable Level Transmitter with EF Seal (Measurement in inches (millimeters))
Rosemount 3051S Scalable Level Transmitter with EF(1)- Coplanar Style
5.17
(131)
4.51
(114)
8.57
(217.7)
+ Direct Mount
Extension Length
Rosemount 3051S Scalable Level Transmitter with EF(1) - In-Line Style
5.17
(131)
8.04
(204)
(1) EF (EFW) seal dimensions and pressure ratings can be found in the Rosemount DP Level Transmitters and 1199 Remote Seals Product Data Sheet,
(00813-0100-4016).
www.rosemount.com
121
Rosemount 3051S Series
January 2013
Figure 14. Rosemount 3051S Scalable Level Transmitter with RF Seal (Measurement in inches (millimeters))
Rosemount 3051S Scalable Level Transmitter with RF(1)- Coplanar Style
5.17
(131)
4.51
(114)
8.57
(217.7)
+ Direct Mount
Extension Length
Rosemount 3051S Scalable Level Transmitter with RF(1) - In-Line Style
5.17
(131)
8.04
(204)
(1) RF (RFW) seal dimensions and pressure ratings can be found in the Rosemount DP Level Transmitters and 1199 Remote Seals Product Data Sheet,
(00813-0100-4016).
122
www.rosemount.com
January 2013
Rosemount 3051S Series
Figure 15. Rosemount 3051S Scalable Level Transmitter with RT Seal (Measurement in inches (millimeters))
Rosemount 3051S Scalable Level Transmitter with RT(1)- Coplanar Style
5.17
(131)
4.51
(114)
8.57
(217)
+ Direct Mount
Extension Length
Rosemount 3051S Scalable Level Transmitter with RT(1) - In-Line Style
4.51
(114)
8.04
(204)
(1) RT (RTW) seal dimensions can be found in the Rosemount DP Level Transmitters and 1199 Remote Seals Product Data Sheet, (00813-0100-4016).
www.rosemount.com
123
Rosemount 3051S Series
January 2013
Figure 16. Rosemount 3051S Scalable Level Transmitter with SS Seal (Measurement in inches (millimeters))
Rosemount 3051S Scalable Level Transmitter with SS(1)- Coplanar Style
5.17
(131)
4.51
(114)
8.57
(217.7)
+ Direct Mount
Extension Length
Rosemount 3051S Scalable Level Transmitter with SS(1) - In-Line Style
5.17
(131)
8.04
(204)
(1) SS (SSW) seal dimensions and pressure ratings can be found in the Rosemount DP Level Transmitters and 1199 Remote Seals Product Data Sheet,
(00813-0100-4016).
124
www.rosemount.com
January 2013
Rosemount 3051S Series
Figure 17. Rosemount 3051S Scalable Level Transmitter with SC Seal (Measurement in inches (millimeters))
Rosemount 3051S Scalable Level Transmitter with SC(1)- Coplanar Style
5.17
(131)
4.51
(114)
8.57
(217.7)
+ Direct Mount
Extension Length
Rosemount 3051S Scalable Level Transmitter with SC(1) - In-Line Style
5.17
(131)
8.04
(204)
(1) SC (SCW) seal dimensions and pressure ratings can be found in the Rosemount DP Level Transmitters and 1199 Remote Seals Product Data Sheet,
(00813-0100-4016).
www.rosemount.com
125
Rosemount 3051S Series
Accessories
Rosemount Engineering Assistant (EA)
Software Packages
The Rosemount Engineering Assistant software supports flow
configuration for the 3051S MultiVariable and 3051S FOUNDATION
fieldbus Fully Compensated Mass Flow Block (H01 option). The package
is available with or without modem and connecting cables. All
configurations are packaged separately. For best performance of the EA
Software, the following computer hardware and software is
recommended:
NOTE
Engineering Assistant version 6.1 or later requires the use of
Microsoft®.NET Framework version 2.0 or later. If.NET version 2.0 is not
currently installed, the software will be automatically installed during
the Engineering Assistant installation. Microsoft.NET version 2.0
requires an additional 200 MB of disk space.
Minimum System Requirements for Engineering
Assistant 5.5.1 for the 3051S FOUNDATION fieldbus with
Fully Compensated Mass Flow Block (H01 option)
• PC Compatible Pentium 400 or above
• Operating System: Windows XP Professional (32-bit) or Windows
Vista (32-bit)
January 2013
Engineering Assistant Software Packages
Code
Product Description
EA
Engineering Assistant Software Program
Code
2
3
Software Media
EA Rev. 5 (Compatible with 3095, 3051S FOUNDATION fieldbus,
and 333)
EA Rev. 6 (Compatible with 3051SMV only)
Code
Language
E
English
Code
Modem and Connecting Cables
0
H
B
C
None
Serial Port HART Modem and Cables
USB Port HART Modem and Cables
FOUNDATION fieldbus PCM-CIA Interface Card and Cables
Code
License
N1
N2
Single PC license
Site license
Typical Model Number:
EA 2
E 0
N1
Accessories
• 256 MB RAM
Item Description
Part Number
• 535 MB free Hard disk space
Serial Port HART Modem and Cables Only
USB Port HART Modem and Cables Only(1)
FOUNDATION fieldbus PCM-CIA Interface Card and
Cables Only
Long-life Power Module for Wireless option
03095-5105-0001
03095-5105-0002
• RS232 serial port or USB port (for use with HART modem)
• CD-ROM
Minimum System Requirements for Engineering
Assistant 6 for the 3051SMV
• Pentium-grade Processor: 500MHz or faster
• Operating System: Microsoft Windows 2000 (32-bit), Windows XP
Professional (32-bit), or Windows 7 (32-bit)
03095-5108-0001
701PBKKF
(1) Supported by Snap-On EA with AMS Device Manager version 6.2 or
higher.
• 256 MB RAM
• 100 MB of available hard disk space
• RS232 serial port or USB port (for use with HART modem)
• CD-ROM
126
www.rosemount.com
January 2013
www.rosemount.com
Rosemount 3051S Series
127
Rosemount 3051S Series
Product Data Sheet
00813-0100-4801 Rev RA
Emerson Process Management
Rosemount Inc.
8200 Market Boulevard
Chanhassen, MN 55317 USA
T (U.S.) 1-800-999-9307
T (International) (952) 906-8888
F (952) 906 8889
www.rosemount.com
Emerson Process Management Asia
Pacific Pte Ltd
1 Pandan Crescent
Singapore 128461
Tel +65 6777 8211
Fax +65 6777 0947
Service Support Hotline : +65 6770 8711
Email : [email protected]
January 2013
Emerson Process Management
Latin America
1300 Concord Terrace, Suite 400
Sunrise Florida 33323 USA
Tel + 1 954 846 5030
Emerson Process Management
Blegistrasse 23
P.O. Box 1046
CH 6341 Baar
Switzerland
Tel +41 (0) 41 768 6111
Fax +41 (0) 41 768 6300
Standard Terms and Conditions of Sale can be found at www.rosemount.com\terms_of_sale
The Emerson logo is a trade mark and service mark of Emerson Electric Co.
Rosemount and the Rosemount logotype are registered trademarks of Rosemount Inc.
PlantWeb is a registered trademark of one of the Emerson Process Management group of companies.
HART and WirelessHART are registered trademarks of the HART Communication Foundation
All other marks are the property of their respective owners.
© 2012 Rosemount Inc. All rights reserved.
Emerson FZE
P.O. Box 17033
Jebel Ali Free Zone
Dubai UAE
Tel +971 4 811 8100
Fax +971 4 886 5465
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement