BHHF - Data Sheet

BHHF - Data Sheet
Data sheet
BHHF
Sheet No.: BHHF 1.01 RevA
Date: October 2010
Hydraulic single-acting balanced rotary actuator
90° (quarter-turn) fail-safe
Control equipment:
The BHHF actuators are designed for pipe connection to the G 1/4 actuator port.For further
information please see separate data sheets for the whole range of blocks and other actuator
mounted control components. (Interface for Cetop 3 valves).
Classification:
Meets requirements from the major classification and approval authorities like:
Russian Register of Shipping
Det norske Veritas
Bureau Veritas
ATEX
Germanischer Lloyd
Lloyd’s Register of Shipping
U.S. Coast Guard
American Bureau of Shipping
IP68 Water Ingress Protection
RINA
Manufacture:
The BHHF actuators are manufactured in accordance with the guidelines for quality system stated in
the ISO standard. After assembly each actuator is flushed according to ISO 4406 19/16 standard and
plugged. Flushing according to ISO 4406 16/13 standard can be performed on request.
Main data:
Temperature range:
-20°C to +80°C, (-5°F to +180°F)
seals NBR (other temp. ranges on request)
Housing:
GGG 40 (Ductile Iron)
Piston:
GGG 40 (Ductile Iron)
Output shaft:
SS 2142 (Alloy Steel)
Indicator shaft:
AISI 316 (Stainless Steel)
Intermediate flange:
St 52-3 (Carbon Steel)
Adapter:
SS 2142 (Alloy Steel)
Coating:
Primer: Min. 40 micron, type Hempel EE 13140
Top coat: min. 25 micron alkyd, orange RAL2002
Operating restrictions:
Please observe specific rules and demands from the classification socities and authorities concerning
operating pressure and temperature range. (Example - ABS: Max. operating pressure = 20% of burst
pressure.) For extreme cycle speeds, loads and lifetime expectations please consult manufacturer.
www.Bettis.com
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Data sheet
BHHF
Sheet No.: BHHF 2.02 RevA
Date: October 2010
The BHHF actuator forfail-safe operation of quarter-turn
valves:
- Unique and simple design with cross-over valve.
- Spring action by means of dished springs.
- Easy adaption to all well-known quarter-turn valves.
- Reliable and rugged, with more than 30 years service records on basic design.
- Compact with high-torque output.
- Designed for operation in harsh environments.
- Unlimited mounting positions with built-in adjustments for end stops of rotary movement.
- Balanced rotary principle eliminates side forces and bending of valve shaft.
Pressure on “B”Indicator slot is moving
counter clockwise Valve open and indicator slot
is perpendicular
to the mounting area- A B
Spring will generate
counter clockwise
rotation
Actuator mounted with control block and El indicator
Standard options:
- El on/off or continuous indication IP 68
- Connection block with f. ex. filter
- Single pilot operated non-return valve
- Release valve
- Throttle valve
- Quick connection for emergency operation with portable hand pump
- Built-on emergency operation hand pump
- Epoxy coating
On request, special features available, such as:
- Flushing valve built into the connection block making it possible to flush the system without disconnection of pipes.
- Safety equipment such as mechanical locking device of actuator in closed position.
Note: Not Certified dimensional drawings. Such drawings are available on request. Contact factory with correct model designation and serial number.
Important: Due to Emerson’s continuing commitment to engineered product advancement, data presented herin is subject to change.
The contents of the publication are presented for information purposes only, and while effort has been made to ensure their accuracy,
they are not to be construed as warranties or guarantees, expresses or implied, regarding the products or services described herein or their use or applicability.
All sales are governed by our terms and conditions, which are available on request.
We reserve the right to modify or improve the designs or specifications of our products at any time without notice.
www.Bettis.com
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement