Weco-Catalogue GB-2011-BDef
Functional, professional,
industrial solutions and accessories.
Equipments Catalogue
Contents
Functionnal, professional
solutions & comparative
display
page
8
22
Other materials
page
Weco range and services
8
9
10
11
12
14
15
Edge 310 Centring and edging device
Edge 350C Automatic edgers with integrated drilling
Edge 550 High range automatic edger with integrated drilling
Edge 580 Designed for versatility and speed
Edge 650 Full Functionality: At Your Fingertips
pour un maximum de performances
Shapemaker Ideal solution for shapes management
and modification
Compatibility display
Functions display
16
17
18
19
20
Trace 2 HC Intellignet tracing
Trace3 For a safe tracing
Cad 3 Numeric order without parallax error
Cad 4 More than a blocking device
Cad 5 The advanced decentration and blocking system
22
23
24
25
26
27
28
Edge 955 New State-of-the-art edger for lab
Edge 990 Industrial solution
Optomove software Logistics solutions for labs
Lab Control Compatible hardware system
Verifier Pro Turbo The centring lensmeter
VM 2500 Freeform lens analyzer
Bevels Flexibility in creation
29
30
Smooth 1 & 2 /2 wheels
Ergonomic manual edgers with one or two wheels
Workshop
34
Accessories
29
Accessories
page
6-7
16
Industrial solutions
& bevels
page
Index
13
Tracers
and Centring
devices
page
4-5
34
Index
4
Edge 310 - page 8
Edge 350 C - page 9
Edge 550 - page 10
Edge 580 - page 11
Edge 650 - page 12
Shapemaker - page 13
Trace 2 HC - page 16
Trace 3 - page 17
Cad III - page 18
Cad 4 - page 19
Cad 5 - page 20
Edge 955 - page 22
Edge 990 - page 23
Optomove software - page 24
Index
5
Lab Control software - page 25
Verifier Turbo 2 - page 26
VM 2500 - page 27
Smooth 1 and 2 - page 29
Filtration tanks - page 30
Polisher - page 30
Drills - page 31
Sress viewer - page 32
Ultrasonic cleaning machine - page 31
Frame heaters - page 32
Automatic lens groover - page 33
Accessories - pages 34-46
Weco range
6
The Weco company, established in 1914, is a pioneer in the optics
market and more particularly in the field of integrated drilling.
Today Weco presents a large range of edgers based on prestige and
robustness and which addresses all market segments.
The notion of modularity, strengths of the Weco range, allows the
professional to update their system completely or gradually. This
spreads the need for investment as there is compatibility between
new and older equipment.
The range consists in 3 groups
> Functional solutions (300 series) with options for an integral
blocking device or drilling functions.
> Professional solutions (eg, Edge 650) top of the range,
multifunctional with high precision results.
> Industrial solutions: a key point of the Weco range; the Edge 990
is the only edger on the market without blocks and consumables.
The Edge 950 is a semi-industrial edger. Perfect for the medium
sized laboratory or/and opticians with large output requirements.
7
Since the foundation in 1914 Weco established numerous pioneering innovations in lens edging as well as set standards in the work flow of
optical workshops. Weco’s merit for opticians lead to being a synonym for modern optical workshop and formed the basis of Weco’s success.
Participate in our success!
> 1914 - Otto Wernicke a mechanical engineer founded a company manufacturing speciality machinery factory in Rathenow, which is located
some 50 kilometers from Berlin.
> 1935 - Weco develops the first edging wheel with groove and device for edging V profile bevels.
> 1945 - Weco moves to its current home in Düsseldorf.
> 1952 - Weco launches the first automatic edger globally. The Weco FM9 employed use of a ceramic grinding wheel.
> 1953 - Weco introduces the first diamond wheel for optical workshops. Weco develops decentration sucker.
> 1954 - Weco launches the FMD - the first fully automatic lens edger incorporating a diamond roughing wheel.
> 1971 - Weco offers the first fully electronically controlled edging machine.
> 1975 - The popular Weco 12SC compact edger is released, which later grows to become one of the most widely used conventional edgers
available.
> 1982 - Weco launches the first CNC (patternless) automated lens edger globally - the Weco 480 CNC.
> 1987 - Weco invents the trace-n-edge-system.
> 1994 - Weco produce the world’s first parallax-free CNC blocking system - the CAD 2000. As sole supplier Weco products are certified
according to CE.
> 2000 - The Weco 880 wins the OLA Award of Excellence, USA, in San Diego, California, USA.
> 2002 - Weco launches the world’s first block-less robotic lens edger incorporating the Verifier Pro - the Edge 860 VI.
> 2003 - Weco is awarded the OLA Award of Excellence for the Verifier Pro in Orlando, Florida, USA.
> 2006 - Weco introduces the first blockless All-in-One-Finishing System: the Edge 990..
> 2007 - Weco introduces Edge 550. Drill holes in angles can be manufactured with the Edge 550
> 2009 - Silmo 2009: Weco presents the Edge 650, industrial standard for the optical workshop, nominated for the Silmo d’Or
> 2010 - Trace 2 HC, the innovative Tracer for High Base Frames is nominated for the Silmo d’Or 2010.
Professional solutions
Edge 310
The conventional all-in-one
EdgeCenter
PN 1142-0001-01
8
With satisfying functionality Weco’s conventional EdgeCenter
convincing. As all-in-one EdgeCenter it fullfils all required steps for
grinding a lens: tracing, centring, blocking and edging. With the
smallest possible footprint, it offers all the necessary functions.
Edge 310 has a clear monitor with an ergonomic keypad for easy
and fast operation of all functions. Each working step will be
displayed by dedicated icons so that the user can easily recognise
the status of the job immediately.
> all-in-one EdgeCenter
> built-in Tracer
> built-in MiniCad centring device
> built-in Edger.
Tracing - built in Tracer
Once the frame is inserted and semi-automatically clamped, a
single key starts the reading of the frame. It will give 5D readings
including thickness of the frame and bevel apex position as well.
> Semi-automatic clamping of frame
> Graphic display of 5-D tracing data, form and glass contraction
> Display of frame measurement values.
Your benefit from profitability
> Ideally suited for the small to medium optical workshop
> Short cycle times in the smallest possible space
> Increase of efficiency due to less breakage
> Fewer manual operations in the process due to logical
user guidance.
Edge 310 technical data
Width
660 mm
Depth
590 mm
Height
420 mm
Weight
68 Kg
Power Input
5A
Voltage
230 V 50/60 Hz
Centring - built in MiniCad
The lens is rapidly aligned to the patient’s data using screen
symbols. At only one glance, the suitability of the shape with the
lens is seen, thanks to the display at scale 1:1.
> Easy and fast decentration
> Precise manual blocking.
Edging - built in Edger
After the selection of the material and the finishing type of the lens,
the Edge 310 takes over and completes the process. With the
four grinding wheels Edge 310 offers a wide range of edging
possibilities to the workshop. Of course it is suitable for all lens
materials including Trivex.
> Suitable for all lens materials including Trivex
> Four grinding wheels
> Fully-automatic edging.
See accessories pages 34_35
Built-in MiniBlocker
Lens support,display and keypad
Professional solutions
Edge 350 C
The Compact Machine
with integrated drilling
PN 1142-0201-01
Weco’s new innovative compact edger combines functionality with
aesthetic design. The system comprises the impressive Trace 3
and the Edge 350 Compact with integrated miniblocker and
integrated drilling. This remarkably small footprint contains an
edger that will fulfil very step of the edging process with utmost
accuracy: tracing, centring, blocking, edging and drilling.
> Built-in MiniBlocker
> Compact machine in combination with Trace 3
> Suitable for all lens materials
> Drilling
> Combination with former equipments is possible
Automatic lens clamping
Electrical clamping secures the axis.
Drilling
Edging and drilling in a same process for more safety
Edge 350 Compact technical data
Width
660 mm
Depth
590 mm
Every lens material may be processed
Using the combination of four diamond wheels, including fully
automatic lens grooving and chamfering supplied as standard.
Height
420 mm
Weight
70 Kg
Power Input
9,5 A
Effortless lens processing
With automatic grooving and chamfering, meaning that the lenses
fit properly first time and with minimum operator intervention.
Voltage
230 V 50/60 Hz
The unit meets the European EMV Standards Class A Industry
Standard
Automatic bevel
Internal and external safety bevel
to obtain optimum finishing on organic and mineral lenses.
Polishing wheel
rimless and bevel polishing.
Ergonomic display
LCD screen displays intuitive icons for an easy-to-use edger.
Trace 3
See accessories pages 34_35
Built-in mini blocker
9
Professional solutions
Edge 550
Superior edging results with system
with integrated drilling
PN 1143-0031-01
10
The goal of the progressive optical technician is to produce high quality
spectacles, using minimal manual processes, within a short space of
time. This important goal can easily be achieved using advanced lens
finishing equipment, with many intelligent characteristics and simple
operation.
The Edge 550 provides simple and economical manufacture of
the widest range of spectacles, including rimless spectacles.
Reproducible, fast and highly precise drilling results ease the work
in the workshop. Naturally the Edge 550 fulfils every other function
associated with a high quality edging system, including standard 3D
lens bevelling for conventional spectacle frames and grooving for
Nylor frames.
For a premium and professional finish, a high quality polish can be
applied to produce a superbly finished lens.
> Drilling in variable angles
> Grooving according to the lens curve
> Bevelling according to the frame curve
> Chamfering on both sides of the lens
> Flat and V bevel polishing
> Self-explanatory intuitive operation.
Self-explanatory operation - seeking for comfort
Since Edge 550 offers comprehensive functions and options,
we set a high value on the utmost comfortable operation during
development. Icons guide the operator intuitively through every
process and navigation is safe and easy. The operator interface can
also be customised, to permit only those functions commonly used
to be available.
> Comfortable touch screen
> Easily understood interface using icons
> Simple operation for complex procedures
> Logical support of procedures
> Individual customisation of the operator interface.
bevel with flexibility - seeking for elegancy
With Edge 550 all lenses are measured after the roughing cycle to
define the ideal position of the bevel.
> Automatic bevel equivalent to frame curve
> Bevel in defined distance to front surface
> Bevel in percentage of lens thickness
> Bevel equivalent to a defined lens curve
> User-defined positioning of the bevel in `Manual Mode`.
assembled easily and without manual touching-up or adjustment.
Additionally, slots and blind-holes can easily be reproduced, resulting
in a perfectly assembled rimless frame, exactly what your customer
demands.
Polish and brilliancy - seeking for elegancy
To enable you to react flexibly to customers wishes, Edge 550 is
equipped with four grinding wheels. Therefore, the handling of all lens
materials, as well as finishing of grinding surfaces with a superb polish, is
achieved. This results in a brilliant surface for both flat and V profile bevel.
> Flat polishing
> V profile polishing.
Grooving in many variations - seeking perfection
The slot is applied by a small grooving-wheel that will process
all plastic lens material, i.e. Trivex and PC. The ideal angle
for the slot is calculated in the case of higher lens curves. The
grooving-wheel operates according to the identified angle. Edge 550
also allows groove-bevel in relation to the lens thickness. For special
applications, the slot is positioned in a defined position on the lens. If
desired the slot can be positioned on part of the circumference only.
With Edge 550’s flexible grooving function, any customer wish can
be satisfied.
a
b
0,6 mm < a < 1,2 mm
0 mm < b < 0,8 mm
Edge 550 technical data
Width
510 mm
Depth
600 mm
Height
570 mm
Weight
69 Kg
Power Input
7A
Voltage
230 V 50/60 Hz
Drilling in angle - seeking precision
A newly developed WECO drilling unit enables drilling of lenses at an
angle. Therefore lenses with high curvature can be drilled inside the
edger with absolute precision. The edger automatically measures the
lens geometry and calculates the ideal angle for the drilling operation.
The advantage to the users is that the rimless spectacles can be
See accessories pages 36
Drilling in angle
Drilling equivalent to lens curve
Professional solutions
Edge 580
Designed for versatility and speed
PN 1143-0041-04 - All plastics version
PN 1143-0041-06 - All materials version
Due to the frequent changes in optical fashion an edger of the
superior range of optical machinery has to be versatile. With this aim
WECO has advanced the well approved edger much further to adapt
it to the increasing demands of nowadays markets. The focus was
set on the individual processing of highly curved wrap lenses as well
as the drilling function.
The new Edge 580 is not only an extension to predecessor
regarding functionality but offers as well a way higher operating
speed that brings the machine close to an industrial edging center
without any deduction when it comes to quality and precision!
Key features of WECO Edge 580
> Special bevel program for Hi-curve lenses
> Handy additional features in drilling mode
> Optimized timing in operation makes it fast
> Mini-bevel for best fitting precision and esthetic
appearance of thin frames
> Auto program for Chemistrie® solar clips
> Extensive range of feasible applications
Special program for high curve lenses
With its specially shaped diamond wheel it is now possible to alter
the appearance of the bevel by setting the bevel backside lowering
individually. The amount of reduction can be applied individually for
every point of the lens outline in a comprehensive screen. So you
can adapt the bevel to your frames’ demands to achieve a good fit
even on highly curved wrap frames. The bevel is sharper by 20° in
comparison to a standard bevel what leads to a tight fit in the frame
groove whereas the backside of the bevel is extended to allow an
easy mounting even with thicker temple parts.
> New diamond wheel with a dedicated Hi base profile
> Angle of the bevel backside adjustable individually in every point
before edging for perfect fitting
> Comprehensive screen preview and esthetic smoothing
of the lenti chamfer for a perfect result
Optimized edging cycle time
With the optimized cycles in edging and measuring and grace to
a faster wheel speed we are now able to present to you an edger
that can be used very efficiently and prolifically. The measurement
cycle before the roughing can be omitted to speed up the cycle
time. With an advanced drive technology and a newly developed
diamond wheel your valuable time is saved that you can use for your
customers. The advanced and improved processes facilitate your
work flow in the lab a lot and increase efficiency. Further it offers:
> High speed due to optimized processes
> Faster machining achieved by new edging technology
> Optimized measuring cycle increases precision and productivity
Useful additional functions for drilling
The newly designed electric WECO drill unit allows drilling optical
lenses under an angle to achieve a good fit in the rimless mounting parts. Therefore even lenses with a high curve can be drilled
precisely directly inside the machine without any possible errors by
swapping the lens into as separate drill-center. Additional plotting
info can be done beforehand on the CAD blocker in a big, comprehensive screen. The angle to be drilled is then derived from the
hole co-ordinates of the job and the lens curve that was felt by the
machine. Like this, the lenses can be mounted without any manual
See accessories pages 36
post processing. With great ease you can process holes, slot-holes,
oblongs, notches and blind holes. In case the need of a post processing arises, the drilling process can be redone with a different
diameter at a fingertip. The drilling co-ordinates can be displayed and
altered directly at the edger so that the peripherals remain available
for other jobs and that there’s no need to call the job again on another
device. The result is a perfectly machined rimless job – exactly what
your customers expect from you.
> Drilling perpendicular to front and back surface
> Drilling perpendicular to a given lens curve
> Up to 20 co-ordinates per side.
> Holes, slots, oblongs and notches can be done as holes
or blind holes
> Individual post processing of the holes on the edger’ screen
menu at a fingertip
> Receipt of the Drilling plan by VCA/OMA protocol from
any host possible
Mini-bevel for highest fitting precision
With the edge 580 all lenses are being measured individually.
Therefore, not on any lens all the measurements are taken,
already in the beginning a decision is taken which figures are
needed in this specific job configuration. Besides the standard bevel
programs there is a manual bevel program available, that allows you to
manipulate the bevel position In any point of the lens shape and to
gain the full control of the bevel before touching your precious lens.
Even more, a mini-bevel is available in every program. It reduces the
bevel size and gives you a higher precision when mounting the lens
into the frame. It also avoids the formation of a whitish ring around
the lens on thin frames that is visible when you place a standard
bevel into small frames.
> Standard bevel programs
> Individual placement of the bevel in anual mode
> Mini-bevel with adjustable facet size for perfect fit and esthetic
appearance
Chemistrie™ Sunlens function
The popular Chemistrie™ magnetic sunlens technology uses small
magnets embedded in the lens to attach the sun lens to the prescription lens utilizing Eyenavision’s patented technology. Briot has developed special software that guides the operator step-by-step through
the processes to create Chemistrie™ Sunlenses on the Edge 580.
This straight forward user interface makes it easy for the operator
to achieve excellent results. Lenses are permanently magnetized
through the placement of miniature magnets that enable the layering
of base-curved matched lenses for sun protection or for refractive
use. Features and benefits of the software include:
> Simplified user interface.
> Default settings to ensure accurate placement and depth
of the magnets.
> Archiving of RX and Sunlens jobs for easy reproductions.
> Compatibility with almost all ophthalmic frames.
Edge 580 technical data
Width
510 mm
Depth
600 mm
Height
570 mm
Weight
69 Kg
11
Professional solutions
Edge 650
Full Functionality:
At Your Fingertips
PN 1137-0221-01 to 1137-0231-06
12
Drilling
In-chamber drilling and edging not only increases productivity
and accuracy but also eliminates any risk associated with manual
drilling. Experience the art of drilling with the WECO Edge 650:
Drilling at variable angles, true rectangular holes and blind holes.
The possibilities are endless. Group holes for drilling at the same
angle or drill each hole at an individual angle. You have complete
control.
Grooving
The Edge 650 has Universal tools for drilling, grooving, milling
and chamfering. Adjust the groove depth and width according to
the frame requirements. Working with Polycarbonate or Trivex®?
No problem, a special tool is available to groove even the most
difficult materials with precision and speed.
The GrooveClean Mode removes any residue after grooving and
polishing. And to finish the lens, choose from 2 chamfering settings
on the front and 3 on the rear for the perfect cut.
Smooth Mode
Working with and measuring high index, thin and soft materials
has never been easier. Just use the Smooth-Mode for a perfect
and gentle touch for even the most delicate of lenses. Use the
automatic bevel mode or simply select the manual bevel option.
Even the most diffi cult jobs come out just the way you want them.
Edge 650 technical data
Polishing
And last but not least the WECO Edge 650 comes with a new
polishing technique for a high gloss polish on either Flat or V-bevel.
HighCurve Mode
The Optional HighCurve Mode makes edging lenses for 8-base
frames as easy as 1 - 2 - 3. The special bevel wheel takes the rear
edge of the lenses down for easy insertion into the frame.
FA
Edge 650 Serie
1137-0221-01
1137-0221-02
1137-0221-03
1137-0221-04
1137-0221-05
1137-0221-06
1137-0231-01
1137-0231-02
1137-0231-03
1137-0231-04
1137-0231-05
1137-0231-06
Edge 650 /FA RI GP PC POL 230V
Edge 650 /FA RI GP TR POL 230V
Edge 650 /FA RI PC HC POL 230V
Edge 650 /FA RI TR HC POL 230V
Edge 650 /FA RI GP PC HC POL 230V
Edge 650 /FA RI GP TR HC POL 230V
Edge 650 /FA RI BW GP PC POL 230V
Edge 650 /FA RI BW GP TR POL 230V
Edge 650 /FA RI BW PC HC POL 230V
Edge 650 /FA RI BW TR HC POL 230V
Edge 650 /FA RI GP BW PC HC POL 230V
Edge 650 /FA RI GP BW TR HC POL 230V
See accessories pages 37
RI
Safety bevel
AV/AR
Grooving
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Width
536 mm
Depth
478 mm
Height (back)
545 mm
Height (front)
608 mm
Weight
80 Kg
Power
9,5 A
Voltage
230 V 50/60 Hz
The unit meets the European EMV Standards Class A Industry
Standard
BW
Drilling
X
X
X
X
X
X
GP
PC
Mineral / ORGA Polycarbonate
X
X
ORGA
ORGA
X
X
X
X
ORGA
ORGA
X
X
X
X
X
X
X
X
X
X
X
X
X
X
TR
Trivex
HC
POL
HighCurve Mode
Polishing Flat
V-Bevel
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
FLAT
FLAT
X
X
X
X
FLAT
FLAT
Professional solutions
Shapemaker
A perfect solution for the administration
and modification of lens shapes.
PN 1139-0001-01 Shapemaker Current Loop
PN 1139-0001-02 Shapemaker OMA
13
The ShapeMaker is a WECO tool for the modern and progressive
optical workshop, consisting of an interface box, software and
connection cables. The ShapeMaker interface box is connected
to the Current Loop (CL) system and to a PC. The function of your
current edging system can easily be extended without having to
change/modify the existing configuration.
The ShapeMaker software is installed in a user-supplied PC.
Once the connection with the system is completed, the performance
of your edging system can be extended with the following functions:
>L
ens shape administration
>L
ens shape modification
>M
anagement of drill hole coordinates.
Lens shape administration
The ShapeMaker can store as many shapes as required.
It allocates a shape to a brand or model designation, thereby
making possible the memorising of frame collections. A lens shape
can be assigned to a customer, and this is used in order to find the
correct and right shape for the specific customer. The shape of the
lens, the manufacturer or the customer can be located very quickly
and easily using a built-in search function.
> Storage of shapes
> Assigning a lens shape to a brand /model
> Assigning a lens shape to a customer
> Search function.
Lens shape administration
Lens shape modification
Lens shape modification
The ShapeMaker has a shape modifier to change the shape of a
lens for rimless production as follows:
> Lower part of the lens
> Upper part of the lens
> Nasal part of the lens
> Temporal part of the lens.
The modified shape can either be overwritten or stored with a new
description.
Drill holes management
The management of drill holes, in conjunction with a lens shape,
is simplified with ShapeMaker. It can export the drill hole data or it
can assign them to other jobs, thus simplifying the adaptation of
modified shapes to existing frames.
PC requirements
Windows XP SP2, 2000 SP4
Min. PIII 1GHz, min. RAM 256, 2x USB
(USB/ Serial Converter), oder 1x USB + 1x seriell
Management of drill hole coordinates
Shapemaker technical data
Width
105 mm
Depth
130 mm
Height
55 mm
Weight
0,4 Kg
Comparison display
Display of compatibility
Equipment connection possibilities between older models
with most recent
14
Edge 310
Edge 350 C
CL-OMA-box
CL-OMA-box
•
•
Edge 455
Edge 550/580
Edge 650
Centring
Cad 3
CL-OMA-box
•
•
•
•
•
•
•
•
CL-OMA-box
Cad 4
•
•
•
CL-OMA-box
Cad 5
•
•
CL-OMA-box
CL-OMA-box
+ Shapemaker
•
•
•
•
•
•
•
•
•
•
•
•
•
Tracing
Trace 2 HC
CL-OMA-box
Trace 3
•
Software
ShaeMaker
Mini Host
Shapemaker
•
OMA-CL BOX
Box to connect new and former
equipments
PN 1144-0011-01 (CL box with Shapemaker)
Examples:
> To connect a Trace II to a Edge 350 compact system.
> To connect a Cad III with an Edge 550 system.
Comparizon displays
Functions display
Edge 310
Edge 350 C
Edge 550
Edge 580
Edge 650
• straight
• oriented
• oriented
• oriented
Functions
Drilling
Grooving
-
•
•
•
•
Front safety
bevel
-
•
•
•
•
•
•
•
•
Rear safety
bevel
-
Polishing
• rimless and bevel
polishing depending
on the version
•
•
• bevel and rimless
polishing depending
on the version
• bevel and rimless
polishing depending
on the version
High curve
-
-
-
•
• option
15
Tracers
Trace 2 HC
Highest Quality Technology
for High Base Curves
PN 1114-0511-31
16
Precise Tracing as a basis for precise Edging
The quality of the edging result of a spectacle lens is directly related
to the tracing of the frame. Due to the continuously changing
styles in fashion and in frame materials, the demands on scanning
increase. On the one hand frames should not be distorted, on the
other hand the tracing stylus must always stay inside the frame
groove. Consistent tracing pressure, based purely on gravity force,
makes the Trace 2 HC the most accurate and precise tracer.
The fast growing remote edging segment requires the most reliable
and precise tracer. The Trace 2 HC consistently and precisely
captures not only the shapes of frames, patterns and demo
lenses fully automatic, but lets you replicate the results time and
time again. Frames are traced using threedimensional technology,
which takes into account the curve and (tilt or angle) of the frame
and detects the width o the bridge – even for extreme shapes.
And of course, data transfer to your host software and software of
different lens manufacturers is standard.
Intelli-Stylus - the solution for high base curves
For the most highly curved frames, to remain accurate is a big
challenge. Weco took its already proven technology to the next level
– The Trace 2 HC. The Intelli-Stylus, due to our unique patented
Floating Technology reproduces the most extreme shapes, even
for highly curved frames and shallow grooves. Finally a technology
that easily lets you trace both sides of a high-base curve frame.
> Trace both sides of frames with high base curves
> Automatic detection of the bridge size
> Stability due to double guided stylus
> Consistent tracing pressure minimizes distortion.
Advantages at a glance
> Trace both sides of frames with high base curves
> Tracing of small b-sizes down to 17 mm
> Reliability and stability based on long time experience
> Replicability due to self-calibration
> Proven clamping technology for delicate frames
> Small footprint
> Low maintenance
> 3D OMA Protocol for Data transmission
> Connectivity to all Weco equipment.
See accessories page 40
Trace 2 HC technical data
Width
200 mm
Depth
340 mm
Height
185 mm
Weight
4,5 Kg
Tracers
Trace 3
Precise and secure tracing
PN 1136-0001-01
Straight-forward operation and safe handling
> The frame can be inserted at will because frame alignment
and tightening is automatic
> The frame is not distorted as tightening is automatic with
constant pressure
> Vertical and horizontal alignment of the frame without the necessity for manual adjustment
> Nosepiece for perfect positioning of the frame in the tracer
> Straightforward operation through logical user guidance
and easily understandable icons
> Perfect operator support through meaningful and clear help menus on the current task.
Tracing
> Tracing program for plastic and metal frames for perfect fitting
> For metal frame: groove determination for exact fitting precision
> Tracing on both sides, right only or left only
> In the case of one-sided tracing, you are prompted to input
the width of the bridge
> 3D tracing and determination of the groove angle and bevel
length
> Automatic calculation of bridge width of the frame, box
measurement and the circumference of the lens
> Automatic recognition and external tracing.
Security from adjustable tracing speed
> Adjustable tracing speed for difficult frames
> If the tracer jumps out of the groove, Trace 3 remounts it
automatically and reduces the tracing speed
> Three tracing speeds quick, slow, very slow (only automatic).
Output of measurement results
> Clear, graphic TFT colour display with wide viewing angle
> Graphic display of 3-D tracing data during the tracing process
for direct check
> Graphic 2-D presentation of both sides and display
of the measurement values for comparison
> Graphical superimposition of the right and left glass shape
in 2-D
> Display of glass contraction (z co-ordinates) in the display
> Display of bridge widths, box dimension for disc height and
length, circumference and curve of the lens contraction.
See accessories pages 41_42
17
Contour accuracy and precision when tracing
> Internal calculation of the 3-D tracing data for precisely tailored
data records for processing on the edger
> Precise and stable accuracy in fitting through size correction
of the lens taking into consideration the groove angle and depth
> Possibility of decision: use of the independent data from both
sides or mirror-imaging one side, e.g. if one side is bent
> Efficiency through the elimination of superfluous user steps
> Regular calibration.
Trace 3 technical data
Width
310 mm
Depth
385 mm
Height
203 mm
Weight
9 Kg
1 start screen
2 Display of glass contraction
during tracing
3 3D display of form
4 superimposition
of glass shapes
Centring devices
CAD III
The sole CNC centring system
without system and parallax error!
PN 1112-0011-00
18
The CAD III is the computer-centring device for high-precision and
reliable blocking of spectacle lenses of any type.
The innovative technology is an absolute technical sensation,
enabling for the very first time parallax-free measuring in
combination with the high-resolution display. On the display the
spectacle lenses and the mould are presented in upright position,
the right way round and distortion-free. The centring result is
identical with the centring on the monitor.
The patented Cartesian positioning of the spectacle lens retainer
guarantees maximum precision in blocking, as block errors are
now excluded. The gentle motorised blocking facility guarantees
that your high-quality spectacle lenses will be treated carefully in
blocking. With the CAD III you can rely on good results - and be
sure to have satisfied customers, too!
Centring on the monitor
> The whole centring process is displayed on the monitor.
The subsequent centring result then corresponds to what the
user can see on the monitor.
> Spectacle lens and mould are displayed in upright position,
the right way up and distortion-free. The raw glass diameters
and near-sight segments are identified easily and reliably.
> Simple, precise and quick drilling data acquisition for drilling
lenses (in system with the Edge 450 drill)
> Contrast and brightness can be adjusted variably and thus
adapted to all kinds of spectacle lenses
Lens retainer
> Three specially positioned pins automatically match each rear
side of a spectacle lens, thus holding the spectacle lens in a
stable position
> The front surface of the spectacle lens is automatically aligned
in vertical position to the block direction
> Blocking errors are therefore a thing of the past
Indispensable tool
1. binocular insight
The observer sees the spectacle lens and the mould at the same
time in natural size. Movements of the head do not influence the
centring result at all.
2. Splitting mirror
The splitting mirror combines the mould and spectacle lens. The
mould and spectacle lens both appear with the same distance.
Parallax errors are therefore no longer possible.
3. LCD-monitor
The high-resolution monitor displays the mould and centring data.
The input menus are adapted to the user’s centring procedure.
4. Spectacle lens
Effect and geometry of the spectacle lenses have no more influence
on the centring result.
5. Reference layer
The spectacle lens is automatically transported to the parallax-free
layer. That makes the centring result independent of the geometry
of the spectacle lens.
See accessories page 42
In the past you had to compensate these three centring errors.
If you use the CAD III the following three errors can no longer occur
(see figures 1 -3):
1 Parallax error
The centring result changes as a result of moving the head.
2 Projection error
Prismatic effects of the spectacle lenses lead to deviations.
3 block errors
Occur when the front surface of the spectacle lens is not vertical
to the blocking direction.
Key parameters and technical specifications
Easy centring of all spectacle lenses
> Parallax-free
> Independent of the effect and geometry of the spectacle lens
> Upright, distortion-free presentation the right way up
> Centring result independent of the effect and geometry
of the spectacle lens Good identification of near-sight segments
with strong bifocal lenses
> Thanks to infinitely variable contrast and brightness.
High centring accuracy
> By high-resolution display.
Convenient processing of test foil
> By special test foil retainer and separate centring menu.
Reliable determination of the exact centring position
> By automatic calculation and display of raw glass and exact
centring position.
Exact centring and incorporation of prismatic as well
as decentred lenses
> By Cartesian positioning of the lens retainer.
Exact and reliable blocking of high-quality lenses
with centring-sensitivity
> By motorised blocking facility Interfaces
> Current Loop (CL) for operation in the WECO CMS system
> RS232 for operation with industry-segment software.
Cad III technical data
Width
200 mm
Depth
430 mm
Height
335 mm
Weight
10 Kg
Centring devices
Cad 4
The new standard for decentration
PN 1146-0011-01 Cad 4 OMA
PN 1146-0011-02 Cad 4 with current loop extension
This new semi automatic centring and blocking system offers you,
advantages like speed and ease of use that Cad III customers have
appreciated through the years, plus new features made available by
the use of new technology.
Optical Trace - tracing can be so easy and secure
> Advanced video processing system for precise shape recognition
> Fully automatic detection of lenses with drilling coordinates
> No distortion of the shape due to mechanical pressure or force
> Step by step detection so the user can easily confirm or the
correct the layout
> Unique Drill Hole Recognition allows you to review and alter
the coordinates, if necessary
> Zoom Function offers the best accuracy in positioning of drill hole
coordinates and diameters.
Comfortable and easy to use
> Easy access to the blocking and optical tracing area for right
and left handed people
> Ergonomic hand-rest for the layout phase is included in front
of the layout zone
> The blue-light illumination automatically adjusts to the tint of the
lens and the external light level to increase the detection rate
for the smallest details of your lenses.
Administration of your Drill Holes
> Manual control of hole positions and characteristics one-byone
or in groups
> Holes or slots can be added, moved, disguarded, or have
the diameter changed
> Blind holes can be added, drilling angle can be chosen
> Up to 20 hole coordinates or 10 slots to fit every frame
> Drilling Coordinates can be easily transferred from one shape
to another with respect to the new dimensions.
Changing the shape – in seconds
> Modifier Function allows alteration of the shape dimension in
width, height or just in the lower part of the frame (for multifocal
lenses)
> Drill holes are re-positioned automatically in two ways horizontally
and three ways vertically to enable the best position of the shape
into the FrameBibliothèque de formes «New Generation»
See accessories pages 42_43
Shape and frame library
> A huge memory of 2048 shapes with drill data or the frame
memory of 512 jobs is included into the Cad 4
> Just a tap on the screen and a comprehensive database
with much information about the frame appears
> Details like manufacturer, model name and Customer name
can be used as sort criteria.
> A 1:1 preview is available for every shape.
Layout benefits you can count on
> Magnified image of the lens and layout increases accuracy
during centring
> Clear, large LCD screen reduces operator fatigue
> Automatic blocking guarantees a precise blocking pressure
> Layout Modes for all types of lenses can be easily chosen or are
presented automatically if working with an external OMA Host.
Cad 4 technical data
Height
575 mm
Width
330 mm
Depth
304 mm
Weight
15 Kg
Voltage
230 V / 115 V - 50 Hz / 60 Hz
19
Centring devices
Cad 5
The advanced decentration
and blocking system
PN 1138-0011-01 Cad 5 OMA
PN 1138-0011-02 Cad 5 extension current loop
20
Optical Trace functionality
Tracing is the first step in the workflow of lens manufacturing and
historically this measurement has been performed with a Tracer.
Optical Trace functionality offers the possibility of measuring the shape
of a pattern or cut lens without a Tracer. The Optical Trace function no
longer employs a mechanical stylus but instead uses a digital camera
for measurement ready to be processed. The fast operation of Optical
Trace and the less mechanical distortion of the frame and lens results
in increased productivity.
> For lens shape measurement
> For drill hole detection
> Fast operating time of 12 seconds
> Accuracy increases due to less operator-induced mechanical
distortion
> Square shapes and bent shapes are to be perfectly represented
by Cad 5
Drill-hole identification
When manufacturing rimless spectacles the technician must locate
the drill-hole positions. With the Cad 5 drill-hole coordinates are easily
located using optical trace functionality and drillhole identification.
As soon as Optical Trace is activated the drill-holes are located and
displayed on the screen. Additional holes and slots can be added or
removed or even varied in dimension.
> Automatically finds holes and slots in the lens
> Precise positioning due to zoom function
> Manual adjustment of holes
> Operator can add, move and remove holes or slots
> Operator can increase or decrease holes’ diameter
> Blind holes can be added
> Positioning accuracy within 5/100 mm.
Modifier software
A shape modification for the rimless lens is often requested by
the customer. Now you can simply say, “No problem, we have
the solution!” Using Cad 5’s modifier, shape modification becomes
reality. An added benefit of this advanced function is to improve
the processing of progressive lenses. The Modifier is a
special function to adapt the lens shape of rimless spectacles.
To do so, several programs can be applied to adjust:
> Half height, low part of the lens - for progressive lenses
> Height only
> Width only
> Height with width adaptation
> Width with height adaptation
> Circumference radius length.
See accessories pages 43_44
Centring
Centring of the lens is achieved automatically by built in power
measurement. When processing a single vision lens, the Cad 5
performs a lens optical analysis to detect the optical centre and
axis identification. With bifocal lenses, the lens image analysis is
performed by determining the near vision segment. Progressive
lenses are processed by identification of the printings.
The centring of Cad 5 is briefly summarised:
> Centring of any type of lens
> Quick identification of the centring references
> Automatic recognition of any printings
> Instantaneous and automatic centring
> Comparison of the lens diameter to the requested shape
> Power identification for single vision lenses with an accuracy
within ± 0.125 D.
blocking
Having centered the lens, the block is applied by the integrated
blocking unit. Cad 5 employs an advanced electromagnetic
block system to ensure the block is held securely in the block
holder, providing very high blocking accuracy.
> Blocking of any type of lens
> Electromagnetic block for perfect blocking.
Your benefit by progress
> Optical Trace for fast and precise shape detection
> Automatic drill hole identification with higher productivity
for rimless spectacles
> Modifier to modify lens shape for rimless spectacles.
Your benefit from profitability
> Increase of profitability due to less operator mistakes
and damages
> Less manual operations and manipulations
> No need of a lens-meter to identify the optical lens centre
and axis
Centring devices
Cad 5 technical data
Height
660 mm
Width
320 mm
Depth
450 mm
Height of glass retainer
240 mm
Weight
38,8 Kg
Measurement range for dioptre measurement
Sphere
- 6 dpt. to + 6 dpt.
Cylinder
0 à - 6 dpt.
Cylinder shaft
0 - 180°
Prism
0 - 6 cm / m
Basis
0 - 360°
Accuracy of Power
0,125 dpt.
Measurement
Raw lens dimensions Max / min diameter
80 mm / 45 mm
Max / min marginal
20 mm / 0,5 mm
Thickness
Accuracy of detection
0,3 mm
Accuracy of blocker
0,15 mm
Process period
Single-focus lens
20 s
Bifocal lens
10 s
Progressive lens
10 s
Data input and handling
15 s
Total period for one
spectacle lens
45 - 65 s
Interfaces
Weco
WECO CL interface, compatible
with other WECO interfaces
RS232
Serial interface RS232,
data protocol according
to OMA-Standard
1-2-3 O
ptical Trace detection
of shapes
3 Zoom effect
21
Industrial solutions
Edge 955
High-tech edging solution for volume
production more than 13 jobs per hour
22
A professional lab put the focus on quality, reliability and
performance, which are the attributes necessary to produce a
high volume of jobs every day. The new Edge 955 is an advanced
process, high volume lens edger which has been specifically
designed for industrial use. It can be used as a stand-alone edger
with internal memory, or embedded in a multi-machine edging
network employing a lab software solution. Low maintenance cost
and high productivity ensure a high profit in use.
> Suitable for all lens materials
> Suitable for small B-size shapes
> Flat and V bevel polishing as standard
> Grooving and chamfering (front and rear) as standard
> Typical capacity of more than13 jobs per hour.
Advanced characteristics
To comply with advanced requirements, Edge 955’s large grinding
chamber is equipped with four grinding wheels, a fully automatic
electric drilling device as well as with an universal tool for chamfering
and grooving. The fast operating electric drilling tool produces drill
holes from the front side of the lens. The universal tool is designed
to apply safety bevel on the front and rear side of the lens as well
as grooving for nylor frames. Many other functions are specifically
designed to high volume applications.
> 4 grinding wheels
> Integrated drilling device (option)
> Universal rotary tool for chamfering and grooving.
Fast and precise results
To improve upon production times, Edge 955 is equipped with an
innovative and precise lens shaft drive system for superior control
of axis. The operator can set the grinding force individually for
roughing and finishing cycle as well as depending on material and
process. The clamping force is also adjustable to ensure highest
precision. With all these functions Edge 955 sets new standards for
industrial applications.
> Adjustable grinding force
> Adjustable clamping force.
Integrated electrical Drilling (option)
The new Edge 955 can effortlessly produce drill-holes using
its fully automatic integrated lens drilling system. Results are
highly accurate and fully reproducible, and rimless frame
assembly is greatly simplified by the symmetrical drilling of
right and left lens. Edging and drilling in only one clamping,
employed by the Edge 955 eliminates the complication
and time-consuming process of manual drilling and risky
lens-handling is reduced to a minimum. Production within the lab
becomes more efficient and profits are increased.
See accessories page 37
> Automatic drilling from the front site of the lens
> High precision processing of drilling data
> Symmetrical drilling of right and left lens
> Edging and drilling in one clamp ensures best axis precision
> Regular holes, blind holes or slots.
Universal tool for grooving and chamfering
The Edge 955 is equipped with an electrically operated universal
grooving and chamfering tool. This tool enables automatic
production of rear and front side bevel of lenses.
Secondly 3-D guided grooves with variable groove width and
depth, can be produced in all synthetic lens materials.
> Automatic electrical chamfering of all synthetic lens materials
> Automatic grooving of all synthetic lens materials
> Fully adjustable groove width and depth.
Standard Configuration
> 4 grinding wheels
> Suitable for all lens materials
> Flat and V profile polishing
> Electric Grooving
> Front and rear chamfering
> Adjustable grinding force
> Adjustable clamping force
> Large water outlet
> Interface for barcode scanner
> Foot pedal operation for lens clamping.
Options
> Electric drilling available.
Interfaces
The Edge 955 is compliant with the OMA protocol for data
transfer. The extended features are supported. A host computer
with dedicated software is required (WECO Lab- Control software
supports all necessary interfaces).
Edge 955 technical data
Width
640 mm
Depth
610 mm
Height (bench-top) 690 mm
Height (tower) 1 640 mm
Weight (bench-top) 80 Kg
Weight (tower) 110 Kg
Power Input
9,5 A
Rated Voltage
230V 50/60 Hz
Industrial solutions
Edge 990
Blockless industrial solution
More than 28 jobs per hour
Blockless - the unique and economic solution for your lab!
A blockless, all-in-one finishing system is the ultimate economic
solution for a lab because it eliminates expensive shortcomings
of traditional edging technology. It operates with no blocks, no
decentration device and no manual handling.
Purpose designed for high speed and high precision continuous
production, the Edge 990 blockless is the latest generation of lens
finishing technology from Weco. Two edgers and one Verifier Turbo
are integrated within an automated cell.
23
1
2
With these key features Edge 990 blockless will increase your
productivity and profitability! All-in-one finishing system.
> No blocks - blockless edging
> No decentration device
> No manual handling productivity
> Designed for industrial use (three shifts)
> Robust and reliable components
> Capacity up to 32 jobs (64 lenses) per hour
> Low service and maintenance costs increase your profit
> No labor costs
> No job preparation
> No stickers
> No blockpads
> Simplified finishing process
> No investment for separate blocking device
> Savings in rejects.
1 Lenses loading
2 General control screen
Unique features of Edge 990 blockless
> High speed lens loading with high precision axis and vacuum
suction gripper
> One precise loading gripper, plus a separate unloading gripper
for maximum productivity
> Conveyor system for WECO trays
> Wide range of customizing options for trays
> Low consumption of compressed air (air saving mode)
> Built in Barcode Reader for 12 digit code 39, other codes
can be customized.
Edge 990 technical data
Width
2000 mm
Depth
810 mm
Height
1950 mm
Weight
650 kg
Lens Material Plastic
(CR 39 etc.), Polycarbonate, Glass, Trivex (optional)
Minimum
B-Size flat bevel 21,5 mm, V bevel 22,5 mm, grooving 21,5 mm
Lens handling
Integrated fully automatic pneumatic system
Lens checking
Lens power +/ - 8 dpt, add power 2,5 dpt for bifocals
Lens measuring
Verifier Turbo inside
Lens blocking
Blockless handling with suction arm
Lens chucking
Pneumatic
Chucking
Pressure automatic adaptation
Water system
Pump circulation with tap water
Rated Voltage
230 V, 50/60 Hz
Rated Power
5,4 kWh
Industrial solutions
Optomove software
Logistic solutions
for laboratories
24
The new solution for logistics in the optical industry. The system
WECO OptoMove, in combination with WECO LabControl
software, allows very flexible solutions for any in house transport
and controls of industrial production for optical products around
spectacles and lenses.
Shuttles, carrying the jobs with lenses, are moving on a monorail
system, which allows very economic, flexible and intelligent
transportation solutions. WECO OptoMove can connect all work
stations for lens production and lens glazing facilities.
The integration into WECO’s own glazing machinery, for example
the Edge 990 Blockless System, is very simple and efficient. There
are no continuous moving belts which create noise or transport
dirt. The shuttles move smoothly, with no jerking, only when motion
is requested.
Main advantages of WECO OptoMove.
> High flexibility
> Low power consumption
> No continuously moving belts or chains
> Low maintenance costs
> Reduced noise level
> Clean environment.
WECO OptoMove is suitable for
> Surfacing labs
> Finishing labs
> Assembling areas
> Lens stock
> Shipping department
> Intelligent shuttle
> Target address programmed into shuttle
> Local intelligence in routing switches
> Fail safe routing
> Transportation with no jerking
> Number of jobs in process is reduced
> Small footprint
> Link to WECO LabControl for profiling of job
and workstation characteristics.
Services provided:
> Planning
> Layout design
> Integration
> Programming
> Installation
> Maintenance
> Software applications.
Industrial solutions
LabControl
High tech software
solution for labs
25
LabControl is a high power lab management software for lens
manufacturing and finishing labs. It is suitable for a wide range of
applications, from companies generating a few jobs a day to those
producing many thousands of jobs per day. It is fully scalable, from
applications with a single edger, up to major labs with a hundred
machines and automation connected.
This flexibility is possible because the system is based on
a Microsoft MS SQL server database. This is an effective
combination for high speed data processing, with a high level of
data safety and system availability. These features are achieved by
the client – server structure of OS databases and programs.
LabControl is available in two editions:
LabControl LE and LabControl Advanced.
LabControl Advanced
Advanced features, additional to the LabControl LE functions:
> Advanced version
> Supports 8 serial ports
> Surfacing module (e.g. LOH generators supported)
> Job tracking
> Stock management for finished lenses
> Stock management for blanks
> Lens / blank order
> Delivery notes
> Invoicing
> Pricing
> Management Information System MIS (advanced statistics.
LabControl LE (Limited Edition)
Features of LabControl LE:
> Standard version
> Supports to 8 serial ports
> MS SQL Database (MSDE data base engine included)
> Unlimited number of jobs (depends on hard drive size only)
> Basic job administration
> Permanent shapes library including drill data
> Supports 8 serial ports to connect hardware
> Interfaces to all WECO equipment, current or former
> OMA compliant interface
> Interfaces to barcode reader equipment
> Job entry via network from host computer
(ODBC link to the database)
> Job entry via email to order lenses including
remote edging function
> Manual job entry inside the lab
> Basic statistic functions
> Production status
> System parameter administration
> Customer / shop administration
> Job ticket printing.
Connectable hardware units:
> WECO Tracer
> WECO CAD II, CAD III
> WECO Verifier Pro
> WECO Edger via Polling Card
> WECO Edger via OMA-interface
> WECO Edge 852, Edge 862 VI, Edge 890 lab
> Barcode scanner
> OMA clients
> LOH blocker (advanced version only)
> LOH generator (advanced version only)
For adapted solutions Software and hardware requirements please
contact us.
Industrial solutions
Verifier Pro Turbo 2
High-tech solution integrating
centring device and lensmeter
More than 50 jobs per hour
PN 1130-0013-01
26
The Verifier Pro Turbo 2 is a high-tech product solution integrating
both the centring device and lensmeter. In the operating sequence,
it is no longer necessary to mark spectacle lenses on the lensmeter,
as the task of measuring, centring and blocking spectacle lenses
is performed in an automated operating sequence.
Key parameters and technical specifications.
Your benefit by progress
> Operation is easy to learn
> The procedure is automatically controlled
> The spectacle lenses are verified according
to user-set tolerance tables
Process period
Your benefit from profitability
> Fewer operating steps
> Shorter processing periods
> Less rejects
> Higher precision
> High reliability
Single-focus lens
20 s
Bifocal lens
20 s
Progressive lens
20 s
Total period for one spectacle
lens
10 s
Durée totale pour un montage
60 s
Interfaces
Verifier Pro Turbo 2 technical data
Height
655 mm
Width
219 mm
Depth
385 mm
Weight
20 kg
Height of glass retainer
182 mm
Weco
WECO CL interface,
compatible with
other interfaces
RS232
Serial interface RS232,
data protocol according to
OMAStandard
USB two USB interfaces
Technical limits
Measurement range
Sphere
-12 / +12 dpt
f measurement Cylinder
-6 / + 6 dpt
Cylinder shaft
0 - 180°
Prism
0 - 6 cm / m
Basis
0 - 360°
Addition
0 - 3,5 dpt
Raw lens dimensions
Max / min diameter
85 mm / 40 mm
Max / min marginal thickness
20 mm / 0,5 mm
Accuracy of detection
0,2 mm
block range from lens centre
Horizontal
-20 / + 20 mm
Vertical
-15 / + 15 mm
Accuracy of blocker
+ / - 0,1 mm
See accessories pages 44_45
1 Insertion of
spectacle lens
2 Insertion of block
3 spectacle lens after
blocking process
Industrial solutions
VM 2500
Freeform lens analyzer
Process control
The VM 2500 for FREEFORM allows you to precisely inspect any
lens and in particular freeform progressive lenses. The freeform
function makes it possible to inspect the lens and to compare it to
the theoretical map provided by the lens designer.
The VM 2500 for FREEFORM is a high precision lens analyzer
based on the PowerMapTM (Hartman Wavefront 3D Technology).
This unique technology:
> Provides real-time mapping measurement.
> Over 1,000 measured points.
> High precision.
> PowerMapTM of the entire lens.
The VM 2500 for FREEFORM includes state-of-the-art PROCESS
CONTROLS:
> Compare the theoretical and the processed lens
(based on the Freeform XYZ file).
> Connectivity with Rx servers (leading products).
> One-button operation.
> Quality criteria, which can be used for Go/NoGo decision.
Three Easy Steps:
1. Upload reference lens, by using the XYZ progressive surface.
2. Measure the Freeform lens.
3. Compare theoretical lens to actual lens.
27
Bevels
Bevels
Some explanations
28
Flexible creation of bevels
After a short rough-grinding cycle, the lens bevel is processed
optionally as flat bevel, free-floating V bevel, manual V bevel or
computer-controlled 3D V bevel. To control the bevel, its positioning
is graphically displayed on the colour screen.
> Free-floating bevel
> Manual V bevel
> Computer-controlled 3D V bevel
Free-floating bevel
In free-floating mode the bevel reproduction, during the first
revolution of the grinding wheels, is automatically memorised
and all further revolutions, including re-finishing operations, are
computer-controlled. This process drastically improves the bevel
quality on thin lenses and extreme shapes.
Manual V bevel
The manual V bevel option is used if you wish to adapt the bevel
position according to specific requirements, i.e. that the lens fits
into a fancy frame.
Computer-controlled 3D V bevel
In 3D V bevel mode, the lens geometry is measured during the
rough-grinding cycle. Afterwards, the bevel is ground computer
controlled.
For the computer-controlled 3D bevel, a range of automatic bevel
options exist: Auto-Bevel, Percentage Curve or positioning of the
bevel in relation to the front or rear surface of the lens.
> Auto-Bevel
> Percentage Curve
> Positioning of the bevel in relation to the front or rear surface
> Miniature bevel
Auto-Bevel
Auto-Bevel mode is an automatic option that positions the bevel,
taking into account the curvature of the spectacle frame and lens.
It is often used to process lenses that are difficult to adapt.
Percentage Curve
The Percentage Curve option positions the bevel according to a
direct ratio of the lens edge thickness and curvature. This option
can be used for all lenses in the normal range.
Positioning of the bevel in relation to the front or rear surface. The
bevel is applied at a defined distance to the front or rear surface
of the lens.
Miniature bevel
An adjustable miniature bevel can be employed for use in spectacle
frames with a smaller groove depth.
70 %‑
1
0,5 mm‑
2
0,2 mm‑
3
4
Workshop
Smooth 1 and 2 and Smooth 2 / 2 discs
Ergonomic manual grinding machine
with one or two grinding discs.
PN 1017-0020-00
Smooth - 560
PN 1116-0021-01
Smooth II - 590 - Finishing wheel
PN 1116-0021-02
Smooth II - 590 - Roughing / finishing
29
PN 1116-0021-32
Smooth II - 590 - Finishing / polishing
WECO Smooth II – Ergonomic manual grinding machine with one
or two grinding discs.
The Smooth II is predestined for use in a workshop or at training
facilities. It can be optionally equipped with one or two grinding
discs for rough grinding, fine grinding, chipping edges and
polishing and always offers the optimum solution for your specific
requirements due to its diversity.
Two discs requiring with minimum space requirements
> Minimum space requirements by low device width
> Therefore large working areas
> Large grinding discs (Ø150 mm)
> Discs with groove and radius
Working with dry hands
> Hand rest beyond the wet area
> Safety lever with automatic switch ON/OFF function
> Display of operational status
Grinding disc combination
Rough grinding disc width
25 mm
Fine grinding disc with bevel
width 25 mm
Extra-fine grinding disc with
groove Width 25 mm
Diamond polishing disc
(silky matt effect) Width 25 mm
Fine grinding disc with groove
Width 25 mm
Smooth II
01
32
•
02
•
•
•
Subject to changes within the scope of technical
See accessories page 45
Smooth I
•
•
WECO Smooth I - Traditional manual grinding machine with one
grinding disc.
A diamond disc, developed by WECO especially for after treatment,
features the advantages of two discs: one wide flat track, one
diamond facette groove and one rounded working edge.
This disc allows you to chip edges without any problem or grind
flat, tapered and special facettes even if you are processing minus
lenses with high dioptres.
> High grinding performance, because speed and disc construction
are optimally harmonised
benefit from practical details for more efficient working
> User- and maintenance-friendly, as no greasing or lubricating
necessary
> Independent of connection to water supply by integrated easily
accessible cooling system.
Integrated water system
> Optimum water supply and quick water outlet
Disc combinations Smooth II
Smooth I
> Simple water change
> Optionally with direct water connection
> Prevents oxidation of high-quality grinding disc, even long
standstill periods
•
Workshop
Tank (60L) with pump
PN S130067
For closed circuit use.
Big capacity 60 L.
3 levels of filtration, perfectly adapted to the edging
even large amounts of polycarbonate.
Easy cleaning.
First level of filtration (drawer) accessible
Drain valve allowing tank emptying without moving.
Protective plastic film.
Water pump holder with rollers
Water pump is then easier to move.
30
Pump alone
Filtration Tank (20L)
PN S180003
Can be used with most existing machines:
- Capacity 20 L.
- 1 level of filtration.
- Protection plastic film
20 L filtering tankg for use on the water network:
- Without pump.
- Compatible with all Briot edgers
Polyethylen protection bag
(single unit)
Polishing unit
PN 67 60 016
Polishing unit for polishing and sanding
2 rotation speeds: 1 400 and 2 800 tours/ mn
> cloth disk
> flannel disk
> red polishing paste
> yellow polishing paste
> white polishing paste
Dimensions: L 460 x H 200 x P 220 mm
Weight: 8.5 kg
Voltage: 220 V / 240 Hz
Power consumption: 300 W
Workshop
DM3 Drill
PN 68 00 011
The DM-3 Lens Drilling Machine can quickly drill all current lens
materials, polycarbonate, Trivex, CR-39 and mineral glasses,
with high quality results.
The two sided drilling system performs speedy drilling
without cracking of the lens.
The diameter of the holes can be easily adjusted to a precision
of 0.2mm
Design and solidity of bits:
Always a very precise and aesthetic finish.
block to maintain the lens:
Allows correct inclination of the lens during the drilling.
Allows to fit the hole to the required diameter.
Easy to use with high quality results on rimless jobs.
Small footprint
Possible diameter of drilling: 0.8 mm to 2.8 mm
Dimensions: L140 x H185 x W275 mm
Weight: 4.1 kg
Voltage: 230V/50 Hz
31
Column Drill
PN 68 00 013
Drilling of metals and wood.
3 rotation speeds: 6 000 / 4 200 / 2 100 tours / mn
Capacity of the drill bit from 0.5 to 6 mm .
Dimensions: L 120 x H 340 x P 230 mm
Weight: 3.1 kg
Voltage: 230 V / 50 Hz
Power Consumption: 85 W
Ultrasonic cleaning machine
PN 65 60 016
Minimum filling quantity 0.6 litre
Inbuilt heating: 65°C
Tank: stainless steel
Case: stainless steel protected against drips
Degree of protection: IP32
Timer: 1 to 15 mns
Accessories:
- Insertion basket 113 x 113 x 45 mm
with stainless steel lid
Internal dimensions of the tank:
W 190 x D 60 x H 185 mm
Capacity: 0.9 litre
Workshop
Frame heaters
32
Vava
Maga
PN 68 40 007
Frame heater with two extractable frame support arms
Temperature: 150°C
Two extractable frame support arms
Dimensions: L 170 x H 210 x P 140 mm
Weight: 2 kg
Voltage: 230 V / 50 Hz
Power consumption 1200 W
PN 68 40 006
Frame heater with quiet and homogeneous heating
For assembling lenses in plastic frames
Quiet and homogeneous heating: Hot / Cold air selection
knob
Choice of 2 electronically controlled temperature
settings:
- 100°C for acetate frames.
- 200°C for Optyl frames or quick heat
Spot heating for nasal bridge or branches
Mounting platform to position frame with both sides in
contact with hot air flow
Dimensions: L 210 x H 230 x W 300 mm
Weight: 3.1 kg
Voltage: 220 V/50 Hz
Power consumption: 750/1500 W
Stress viewer
PN 67 40 006
- Stress viewer with two polaroid filters
- Stress analysis using two polarising plates
- Lenses fitted in frame for tension measurement
- Heat tempering on glass lens
Dimensions: W 134 x D 154 x H 165 mm
Weight: 0.7 kg
Voltage: 220 V / 50 Hz
Workshop
33
AG5 autogroover
Opticus Rivex 50
PN 68 00 009
Automatic lens groover for glass, plastic
and polycarbonate lenses
Lens diameter: 24mm to 72mm
Choice of three groove positions:
- Parallel to convex face.
- Parallel to concave face or median.
Lens thickness: 1.5 to 11mm
Groove depth adjustable up to 0.7mm
Dimensions: W 170 x D 210 x H 150 mm
Weight: 3 kg
Voltage: 220-240 V / 50 Hz
Power consumption: 80 W
PN 68 00 003
Multifunction riveting press, ideal for reparing frames.
Supplied with accessories for:
- Riveting, drilling, marking
- Expelling screws, perforating, bending
Ideal for fixing frames
Dimensions: W 140 x D 180 x H 260 mm
Weight: 2.5 kg
Key point
Easy access to wheel, which allows
notches to be made
Paddy block for Weco blocks
«Star Blocks»
PN 69 00 001
Tool for removing magnetic blocks
PN 14 07 031
Accessories
Edger 310 - 330 C - 350 C
spare parTs
34
11 90 375 - Ø 25 mm
Weco block holder large
11 90 406 - Ø 19 mm
Weco block holder medium
11 90 522 - Ø 17 mm
Weco block holder small
SVS114005 - Ø 25 mm
Lens clamping adaptor
articulated - large
SVS114004 - Ø 19 mm
Lens clamping adaptor
articulated - medium
SVS114006 - Ø 17 mm
Lens clamping adaptor
articulated - half eye
24 06 488
8mm wrench
24 06 489
10 mm wrench
37 30 003
Key maincover
SVS225046
Pattern and lens to lens holder
only for Edge 310
aDJusTmenT TOOLs
14 04 192
Lens/lens offset
calculation pattern
14 04 185
Scan alignment
adjustment pattern
24 06 487
Triangular scraper
14 04 283
Lens feeler tips removal/
installation tool
Only for Edge 310
only for Edge 350 Compact
14 04 255
Scanform gain
adjustment tool
14 04 191
Pattern axis
adjustment
Accessories
cOnsumabLes
11 38 162 - Ø 25 mm
Flexible lens clamp
adaptor (large)
11 38 161 - Ø 19 mm
Flexible lens clamp
adaptor (medium)
11 38 171 - Ø 17 mm / plat
Flexible lens clamp
adaptor (half eye)
21 62 153
Seal with filter
20 x 27
2001-1190-00 - Ø 25 mm
Blocks Premium
Set of 25 pieces
2001-1191-00 - Ø 18 mm
Blocks Premium
Set of 10 pieces
2001-3228-00 - Ø 17 mm
Half eye
Unit
SVS180048
Set of 10 blocks
6b Ø 25 mm + 4b Ø 17 mm / plat
11 38 181
Lens feeler tips
only for Edge 310
24 07 020
Cleaning disk
roughing
24 07 021
Cleaning disk
finishing
SVS220150
Lens holder ring for blocker
22 29 043
Fuse 3.15 AT
250 V - 5x20
22 29 055
Fuse 8 AT
250 V - 5x20
22 29 002
Fuse 5AT
250 V - 5x20
22 29 056
Fuse 25AT
250 V - 5x20
22 29 052
Fuse 10AT
250 V - 6,3x32
22 29 038
Fuse 2AT
250 V - 5x20
12 01 157
Carriage bulb
6x4x30 - 24 V - 3 W
11 38 196
Lens feeler tips
V2
only for Edge 330 Compact /
350 Compact
SVS180105
Right hand drill bit set
only for Edge 350 Compact
35
Accessories
Edger 550 - 580
spare parTs
36
SVS114005 - Ø 25 mm
Lens clamping adaptor
articulated - large
SVS114004 - Ø 19 mm
Lens clamping adaptor
articulated - medium
SVS114006 - Ø 17 mm
Lens clamping adaptor
articulated - half eye
aDJusTmenT TOOLs
14 04 303
Calibration tool
SVS180125
Kit of bar code reader
(bar code reader + sample of
code bar labels + holder)
14 07 031
Tool for removing magnetic blocks
cOnsumabLes
11 38 162 - Ø 25 mm
Flexible lens clamp
adaptor (large)
11 38 161 - Ø 19 mm
Flexible lens clamp
adaptor (medium)
11 38 171 - Ø 17 mm/plat
Flexible lens clamp
adaptor (half eye)
SVS 180097
Removable lens feeler pads
Set of 4 pieces
SVS180138
Left hand drill bit
set 1mm
SVS180158
Left hand drill bit
set 0.8mm
2001-1160-00 - Ø 25 m
Weco magnetic blocks
large
Set of 25 pieces
2001-1161-00 - Ø 19 mm
Weco magnetic blocks
medium
Set of 10 pieces
11235 - Ø 16 mm
Double side adhesive
pads-half eye
1000 pieces
New !
New !
2001-1162-00 - Ø 17 mm
Weco magnetic blocks
half eye
Set of 10 pieces
60 21 007 - Ø 18 mm
Double side adhesive
pads-medium
1000 pieces
60 21 005 - Ø 26 mm
Double side adhesive
pads-large
1000 pieces
24 07 020
Cleaning disk - roughing
24 07 021
Cleaning disk - finishing
11 97 047
Removable visor
Accessories
Edger 650 - 950 - 955
spare parTs
2001-1056-00 - Ø 25 mm
Clamping adaptator - large
2001-1066-00 - Ø 20 mm
Clamping adaptator - medium
2001-1105-00 - Ø 17 mm
Clamping adaptator - half eye
2001-3214-00 - Ø 25 mm
Block adaptator - large
37
cOnsumabLes
2001-3237-00 - Ø 20 mm
2001-3317-00 - Ø 17 mm
Block adaptator - medium
Block adaptator - half eye
2001-3204-00 - Ø 25 mm
Clamping pad - large
2001-3205-00 - Ø 18 mm
Clamping pad - medium
2001-3315-00 - Ø 17 mm
Clamping pad - half eye
1138-5068-00
Half eye magnetic varioblocks
2001-1190-00 - Ø 25 mm
Blocks Premium
Vendus par lot de 25
2001-1191-00 - Ø 18 mm
White Varioblocks Premium
medium
Set of 10 pieces
2001-3228-00 - Ø 17 mm
White Varioblocks Premium
half eye
Single unit
SVS180048
Set of 10 blocks
6b Ø 25 mm + 4b Ø 17 mm
half eye
1918-3003-00
1919-3003-00
Front safety-bevel knurled wheel CR39/Hi knurled grooving wheel
1918-3004-00
1919 3004-00
Rear safety-bevel knurled wheel Trivex/PC knurled grooving wheel
5997-3003-00
Cleaning and dressing diamond
stick for polishing
5997-3002-00
Cleaning and dressing diamond
stick for roughing
1900-1809-00
Drill bit 0,8 mm
Set of 3 pieces
5997-3018-00
Cleaning and dressing diamond
stick for polishing
1900-1815-00
Drill bit 1 mm
Set of 3 pieces
5997-3019-00
Cleaning and dressing diamond
stick for polishing
5997-3007-00
Cleaning and dressing diamond
stick for finishing
aDJusTmenT TOOLs
5910-3009-00
Flat plier
2021-3019-00
Extraction plier for drill bit
1137-1062-00
Extraction tool for drill bit
3199-0182-00
Cleaning spray
Accessories
430 / 450 / 450 drill / 455 drill
spare parTs
38
2001-3214-00 - Ø 25 mm
Block adaptator - large
2001-3237-00 - Ø 19 mm
Block adaptator - small
2001-3229-00 - Ø 17 mm
Block adaptator
2001-1056-00 - Ø 25 mm
Clamping adaptator - large
2001-1066-00 - Ø 18 mm
Clamping adaptator - small
2001-3062-00 - Ø 17 mm
Clamping adaptator
1090-3713-00
Evacuation spare part
1090-5960-00
Protection with cable clamp
3141-0324-00
Watering tool (new)
3141-0323-00
Straight watering tool
3141-0340-00
Angled watering tool
3571-1225-00
Power supply cable 2,5 m
3652-2502-00
Connection cable 5 m
3652-2503-00
Connection cable 10 m
1114-1773-00
Tracing interface cable 3 m
Accessories
430 / 450 / 450 drill / 455 drill
cOnsumabLes
2001-1190-00 - Ø 25 mm
White Varioblocks Premium
large
Set of 25 pieces
2001-3205-00 - Ø 18 mm
Clamping pad
medium
5999-1015-00
Plastic bags for tanks
Set of 25 pieces
2001-1191-00 - Ø 18 mm
White Varioblocks Premium
medium
Set of 10 pieces
2001-3315-00 - Ø 17 mm
Clamping pad half eye
2001-3316-00 - Ø 17 mm
White Varioblocks Premium
half eye
Single unit
3561-0233-00
Bulb for edging room
3102-0458-00
Toric clamping belt
5998-3027-00
Anti-foam oil
for filtering tanks
2001-3204-00 - Ø 25 mm
Clamping pad-large
1075-1131-00
Protection bags for tank
Set of 3 pieces
3566-0253-00
Fuse 15A protection
for the main engine 430/450
3566-0244-00
Fuse 4A protection
for watering system
5999-1015-00
Protection bags
(25 pieces)
1075-1148-00
Flexible
1900-5617-00
Finishing wheel 22 mm
(450/455 drill)
1911-3008-00
Polishing wheel 15 mm
Edge 430 only
FILTerInG TanKs
For closer circuit use.
Compatible with all Weco edgers
- 3 filtering steps
- Easy cleaning and emptying
1075-0055-00
Filtering tank
1075-1149-00
Filters (10 pieces)
WHeeLs
1900-4620-00
Universal roughing wheel
18 mm
1900-5606-00
Finishing wheel 25 mm
Edge 430 only
1911-3010-00
Polishing wheel 10 mm
1123-1374-00
Polishing kit rimless
and bevel
39
Accessories
450 drill / 455 drill
spare parTs
1094-5908-00
Set turbine + seal
40
2021-1004-00
Key to change the turbine
2021-1002-00
Tools for extraction of drill bit
3102-0478-00
Hard turbine seal
(before)
3102-0443-00
Flexible turbine seal
1900-1808-00
Drill bit 0.8mm
Set of 6 pieces
1900-1810-00
Turbo grooving bit 0,6 mm
5998-3035-00
Turbine oil
1123-3075-00
Auto adhesiv cover seal
3010-5110-00
Screw for stylus
1114-1773-00
Cable RS232 9/25 3m
3566-0202-00
Fuse 2,5 AT
Principal card protection
3566-0247-00
Fuse 0,4 AT
cOnsumabLes
3146-0408-00
Oil for compressor
Trace 2 / Trace 2 HC
spare parTs
1114-3349-00
Stylus for Trace 2 HC
1114-1063-00
Stylus for Trace 2
cOnsumabLes
2001-3088-00
Adhesive block 4 holes
2001-3087-00
Adhesive block 2 holes
Accessories
Trace 3
spare parTs
SVS180103
2 mm double stylus head
SVS180104
2 mm single stylus head
SVS222034
Centring pad
41
aDJusTmenT TOOLs
14 04 192
Lens/lens offset calculation
pattern
14 04 185
Scan alignment adjustment
pattern
14 04 191
Pattern axis adjustment
SVS225046
Pattern and lens to lens holder
Centreur CAD 2
spare parTs
3102-0437-00
Toric seal to maintain
the block
cOnsumabLes
3566-0247-00
Fuse 0,4 AT
1100-1030-00
Centring part for
small lenses
14 04 255
Scanform gain
adjustment tool
Accessories
CAD III
spare parTs
3102-0480-00
Toric seal to maintain the block
1112-1035-00
Centring part for small lenses
42
cOnsumabLes
3566-0247-00
Fuse 0.4AT
CAD 4
spare parTs
S390018
Lens holder large
S390019
Lens holder small
11 15 264
Hand rest
cOnsumabLes
24 06 211
24 06 502
24 06 503
Black permanent pen
Stylus for touch screen
Special pencil
for hydrophobic lenses
2001-1160-00 - Ø 25 m
2001-1161-00 - Ø 19 mm
2001-1162-00 - Ø 17 mm
Weco magnetic blocks
large
Set of 25 pieces
Weco magnetic blocks
medium
Set of 10 pieces
Weco magnetic blocks
half eye
Set of 10 pieces
Accessories
CAD 4
cOnsumabLes
21 35 414
Bar codes tags (100 )
22 29 038
Fuse
2AT-250V-5x20
21 62 200
Toric seal
60 21 007 - Ø 18 mm
60 21 005 - Ø 26 mm
11235 - Ø 16 mm
Double side adhesive
pads-medium
1000 pieces
Double side adhesive
pads-large
1000 pieces
Double side adhesive
pads-small
1000 pieces
10 00 186
Antistatic cleaning wipes
New !
New !
CAD 5
spare parTs
SVS225041
SVS225042
SVS1801125
Lens holder
Uncut patterns holder
Kit of bar code reader
(bar code reader + sample of
code bar labels + holder)
SV1404224
Calibration lens
14 07 031
Tool for removing
magnetic blocks
aDJusTmenT TOOLs
14 04 228
Calibration lens - 3 dioptries
14 04 227
Calibration lens + 3 dioptries
43
Accessories
CAD 5
cOnsumabLes
44
2001-1160-00 - Ø 25 m
Weco magnetic blocks
large
Set of 25 pieces
2001-1161-00 - Ø 19 mm
Weco magnetic blocks
medium
Set of 10 pieces
2001-1162-00 - Ø 17 mm
Weco magnetic blocks
half eye
Set of 10 pieces
SVS300017
Opaque screen (for centring
device before 2009)
SVS300037
Opaque screen
22 01 058
Dulux lamp
24 06 211
Black permanent pen
24 06 503
Special pencil
for hydrophobic lenses
SV1177019
Blocking unit filter
Set of 3
22 29 041
Fuse 1AT - 250V - 5x20
22 29 038
Fuse 2AT - 250V - 5x20
New !
60 21 007 - Ø 18 mm
Double side adhesive
pads-medium
1000 pieces
New !
60 21 005 - Ø 26 mm
Double side adhesive
pads-large
1000 pieces
Verifier Turbo 2
spare parTs
2001-3289-00
Centring part for small lenses
3102-0480-00
Toric seal to maintain the block
cOnsumabLes
3503-0204-00
Fan filter (single unit)
11235 - Ø 16 mm
Double side adhesive
pads-small
1000 pieces
Accessories
Verifier Turbo 2
aDJusTmenT TOOLs
1130-1036-00
Set of control tools
1130-3080-00
Platinum lens, lens holder
45
Smooth 1 and 2
spare parTs
1116-3031-00
Evacuation tool for Smooth 2
1116-3099-00
590 Egder bar
cOnsumabLes
1017-3016-00
Little sponge
for Smooth
1017-3018-00
Large sponge
for Smooth
1116-3096-00
Large sponge
for Smooth 2
1116-3085-00
Small sponge f
or Smooth 2
1905-4160-00
Special fine finishing wheel
with bevel 25 mm Smooth 2
1912-4150-00
Polishing wheel
with bevel 25 mm Smooth 2
DIamOnD WHeeLs
1900-3161-00
Roughing wheel
without bevel Smooth 2
1905-3250-00
Finishing wheel
with bevel 25mm Smooth 1
1905-4150-00
Finishing wheel with bevel 25
mm Smooth 2
Accessories
Drilling DM3
consumables
S807033
Reamer HM20
46
S807032
Drill bit HM19
S807079
Belt
S807039
Protection housing
for diamond wheel
68 00 020
Protection housing
for diamond wheel
68 00 019
Grooving wheel 1,2 mm
S807031
Diamond wheel
Auto groover
spare parts
consumables
S807071
Wheel driving belt
S807051
Notched belt
This document is not contractual - c comme c [rouen] 02 35 73 15 15 - ©photos : E.Bienvenu, C comme C, Briot - FC.00675 - ind. 01 - February 2011
2 rue Roger Bonnet_27340 PONT DE L’ARCHE_FRANCE _Tél. + 33 232 989 132_Fax + 33 235 020 294_www.weco-instruments.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement