Groen Cooker/Mixers Table Top Twin Shaft Agitator Specification Sheet

PROJECT NAME:
LOCATION:
COOKER/MIXERS
ITEM NO:
TABLE TOP TWIN SHAFT AGITATOR ELECTRIC MODEL TDB
Cooker/Mixer shall be a Groen Model TDB-20 or 40/TA/2 quart (specify 20 or 40) stainless steel, selfcontained, steam jacketed unit operating from an electric heated steam source contained within unit and
complete with manual tilt out twin shaft agitator per Bulletin 140850 and as follows:
QTY:
MODEL NO:
AIA NO:
SIS NO:
AVAILABLE MODELS:
TDB-20 TA/2 (20 QUART)
TDB-40 TA/2 (40 QUART)
CONSTRUCTION: Kettle interior shall be of 316
stainless steel, solid one-piece welded construction.
Kettle jacket shall be of type 304 stainless steel, solid
one piece construction. The console and all exposed
surfaces shall be stainless steel. Unit shall be furnished
with a heavy reinforced rim with a butterfly shaped
pouring lip for maximum sanitation and durability. Right
or left hand tilt handle, double panty faucet is standard
and mounted on rear of electrical control box. Etch
markings for measuring quantity of fill shall be provided.
FINISH: Interior of kettle shall be polished to a 180
20 quart models will have 6 or 8 kw input and the 40
quart model 12 or 14 kw input, depending on supply
voltage. Unit shall be factory charged with chemically
pure water and rust inhibitors to ensure long life and
minimum maintenance.
CONTROLS: Controls shall include a thermostat,
Stainless Steel Steam Jacketed
Cooker/Mixer, Table Top Mounted,
Tilting, Self-Contained, Electric
Heated, 20 and 40-Quart Capacities
With Twin Shaft Agitator. (Model TDB20, TA/2 shown).
built in contactor, pressure gauge, front mounted
water sight glass, and heating indicator lamp, and
agitator on-off and variable speed control switch.
SAFETY FEATURES: Kettle shall have safety
tilt cut-off (cuts off heat when tilted to 12°F and
above), pressure relief valve, high limit pressure
switch and low water cut off, 24V control system, and
agitator safety tilt cut off.
emery grit finish. Exterior of kettle shall be finished to
a bright semi-deluxe finish, ensuring maximum ease in
cleaning and maintaining brilliant appearance.
PERFORMANCE FEATURES: Unit shall
be thermostatically controlled to automatically shut
off when desired temperature is reached and turn
on when product temperature falls below desired
AGITATOR ASSEMBLY: Agitator shall be twin
setting. Design shall make it possible for one person
shaft with variable speed drive and 1/2 horsepower
to tilt kettle, even when kettle is filled to capacity.
motor. Motor drive, gears and electrical components
Agitator speed can be controlled to meet the mixing
shall be contained in a stainless steel housing. Twin
requirements of the product being blended. Doubleagitator manually tilts out of kettle.. Primary agitator
continuously scrapes the kettle walls while the secondary pantry hot & cold faucet allows operator to add hot
or cold water while cooking or cleaning. Acid-etched
mixer is a counter rotating high speed agitator.
fill gallonage markings make it easy to measure food
product amounts.
ASME CODE & UL LISTING: Unit shall be
ASME shop inspected, stamped and registered with the
INSTALLATION REQUIREMENTS:
National Board for operation up to a maximum working
Self-contained unit only requires two electrical
pressure of 50 PSI. Kettle is UL listed.
connections: 115 Volt, single phase, 60 cycle
connection for agitator and standard 208 Volt, three
SANITATION: Unit shall be designed and
phase (field convertible to single phase). 50 or 60
constructed to meet NSF requirements, and be NSF
cycles for kettle. (240 and 480 volts available through
listed.
optional products.
SELF CONTAINED STEAM SOURCE: Kettle
ORIGIN OF MANUFACTURE: Designed and
shall have an electrically heated self-contained steam
source to provide kettle temperatures of 150°F to 298°F. manufactured in the United States.
OPTIONS/ACCESSORIES:
Basket inserts
Lift off cover
Holder for lift off cover
480V single or 3-phase supply
for kettle only
Stand mounting (Model TS/9
stainless steel stand available)
Kettle brush kit
3/4 horsepower agitator motor
Cooker/Mixers
140850 RevB
Revised 04/12
B
A
2 [51] TYP (4) PLCS
7/8 [22]
TYP (4) PLCS
30 1/2 [775]
POWER CORD
115V/1/60
(1 AMP)
3
FRONT VIEW
4
3/8"-16 UNC THREADED PLINGS
COU
UNDERNEATH BASE (QTY 4)
27 1/2 [698]
TOP VIEW
1 1/8 [29]
KETTLE IN
TILT POSITION
POUR PATH
DOUBLE PANTRY
FAUCET
3 9/16 [91] 1
SAFETY RELIEF VALVE
AND PRESSURE GAUGE
WATER FILL ASSEMBLY
C
(2) 1/2" MALE NPT CONNECTIONS FOR HOT AND COLD WATER.
MAX POUR PATH
MIN POUR PATH
F
ALL UNITS ARE SHIPPED 208/3/60
80/3/60.
OR 4
6
RIGHT SIDE VIEW
E
2 3/4 [70]
6
1 1/2 [38]
3
1
WALL
6.3
5.8
5.3
8.4
8.4
6.3
8
14
8
7
12
20
35
18
31
POWER CORD
FOR AGITATOR
CONNECTION
20
35
60
30
52
3
1
12.0
11.0
15
25
14
10.1 14
14.4
14.4
10.8
P/N 140070 REV D
P/N 140070 REV D
ELECTRICAL SUPPLY
WATER RESISTANT
AGITATOR HOSING
IN THE UP POSITION
MINIMUM
1 [25]REAR WALL
CLEARANCE
UNIT CONVERTED TO SUPPLY TVOLAGE
INSTALLATION.
A
1/2 HP VARIABLE
SPEED DRIVE:MARY
PRI 0-79 RPM, SECONDARY 0-318 RPM
72" CORD & PLUGRNISHED
FU
FOR 115V AGITATOR CONNECTION
3
480
3
3
440
460
3
3
1
3
400
240
208
1
AMPS
TDB-40
KW
AMPS
TDB-20
KW
VOLTS
PHASE
KETTLE MODEL
ELECTRICAL REQUIR
EMENTS TABLE
(1" FOR 240V,
T FURNISHED)
1 PHASE NO
5
MAIN DIMENSIONSARE IN INCHES. DIMENSIONS
IN BRACKETSARE
[ ]MM.
4
ELECTRICAL SUPP
LY: 3/4" WATER RESISTANT CONDUIT FURNISHED
1
TABLE OF DIMENSIONS
TDB-40, TA/2
TDB-20, TA/2
INCHES
MM
INCHES
MM
24.9
632
23.1
587
33
30.3
769
838
42.5
51.4
1080
1306
5.5
140
4.3
109
40.8
1035
36.5
927
7.5
191
89
3.5
18.5
15.5
394
470
22.3
567
25.1
638
2
SERVICE CONNECTI
ONS AND NOTES:
MODEL
DIM
A
B
C
D
E
F
G
H
TDB
1055 Mendell Davis Drive, Jackson, MS 39272, 888-994-7636, unifiedbrands.net
© 2013 Unified Brands. All Rights Reserved. Unified Brands is a wholly-owned subsidiary of Dover Corporation.