GCA Delfield PriceList 2016 book2 LR

GCA Delfield PriceList 2016 book2 LR
mtwfs.com
Price List
Canada 2016
Book 2 of 2
Serving Counters, Mobile Dispensing and Mark 7
Effective: November 1, 2015
www.GarlandCanada.ca
7
5
Price List Canada 2016
NOTICE:
DELFIELD PRODUCTS ARE NOT APPROVED OR AUTHORIZED FOR HOME OR
RESIDENTIAL USE, BUT ARE INTENDED FOR COMMERCIAL APPLICATIONS
ONLY. DELFIELD WILL NOT PROVIDE SERVICE, WARRANTY, MAINTENANCE OR
SUPPORT OF ANY KIND OTHER THAN IN COMMERCIAL APPLICATIONS.
INSTRUCTIONS AND ASSISTANCE IN ORDERING
Specify the following information when ordering:
1. Your order number
2. Quantity and model number of units
3. Voltage, Cycle, (Hz), & Phase
4. Delivery date and shipping instruction
NOTE: Delfield custom units will require factory drawing(s) to be signed off before order will be processed
SERVICE
When corresponding with the factory regarding service, performance or replacement parts, be sure to refer to the
particular product by correct model number including prefix and suffix letters, numbers and serial number. This
information can be found on the rating plate. Any information pertaining to performance parts or servicing can be
obtained by writing our Mississauga office. Continuous product improvement is a Garland policy, therefore specifications
and design are subject to change without notice.
TERMS AND CONDITIONS
All prices exclude the Goods and Services Tax (G.S.T.) and Provincial and Local Taxes. All prices are in Canadian Dollars.
Refer to Garland dealer policy for:
A. Terms of Sale
B. Equipment Returns or Order Cancellations
C. Damaged Shipments
Garland Canada reserves the right to change warranties, accessories or product configurations without notice. Access our website
at www.GarlandCanada.ca for current information which supercedes any printed information. Further inquiries may also be
directed to Customer Service at 1-888-442-7526.
GARLAND CANADA CUSTOMER SERVICE
VOICE
FAX
Sales
(888) 442-7526
(800) 361-2724
KitchenCare (Parts, Service and Warranty)
(844) 724-2273
N/A
2
Table of Contents
Serving Lines
4
Concepts Serving Systems
5
FlexiShield Food Shields
18
Shelleybasic Serving Lines
22
Shelleysteel Serving Lines
31
Shelleyglas Serving Lines
40
Mobile Dispensing Equipment
58
Mark 7 Component Crafted Equipment
68
Index
72
How to order Delfield Mark 7 equipment
74
Limited Warranty Information
78
Canadian Regional Sales Representatives
79
3
Delfield
™
®
Concepts™ - Serving Systems
FlexiShield® - Foodshields
Ser ving Lines
Shelleybasic® - Value Serving Systems
4
Shelleysteel® - Stainless Steel Mobile Serving
Equipment
Shelleyglas® - Fiberglass Mobile Serving Equipment
4
DCBU: CONCEPTS UTILITY SERVING COUNTERS
DC-H: CONCEPTS HEATED SERVING COUNTERS
Product Information
•
•
•
•
•
Must be hard wired in field
11.87” x 19.87” single hot food wells
are manifolded together to one main
gate valve
Wet and dry operation
Individual infinite temperature controls
One year parts and labor standard warranty
DCBU-T66
DC-H4
shown with an optional fill faucet
Specifications and Prices
MODEL
NUMBER
Utility counters - flat
DESCRIPTION
Utility base, 38” length
Utility base, 52” length
Utility base, 66” length
Utility base, 80” length
Utility base, 94” length
Utility base, 120” length
Utility counters - tiered
DCBU-T38
Utility base, 38” length tiered
DCBU-T52
Utility base, 52” length tiered
DCBU-T66
Utility base, 66” length tiered
DCBU-T80
Utility base, 80” length tiered
DCBU-T94
Utility base, 94” length tiered
DCBU-T120
Utility base, 120” length tiered
DCBU-38
DCBU-52
DCBU-66
DCBU-80
DCBU-94
DCBU-120
MODEL
DESCRIPTION
NUMBER
Heated counters
Heated unit,
DC-H2
two wells
Heated unit,
DC-H3
three wells
Heated unit,
DC-H4
four wells
Heated unit,
DC-H5
five wells
Heated unit, six
DC-H6
wells
L
OVERALL
D
H
L
OVERALL
D
H
SHIP
WEIGHT
FREIGHT
CLASS
CDN LIST
PRICE
38”
52”
66”
80”
94”
120”
36”
36”
36”
36”
36”
36”
36”
36”
36”
36”
36”
36”
171 lbs.
234 lbs.
297 lbs.
360 lbs.
423 lbs.
540 lbs.
100
100
100
100
100
100
Contact CSR
Contact CSR
Contact CSR
Contact CSR
Contact CSR
Contact CSR
38”
52”
66”
80”
94”
120”
36”
36”
36”
36”
36”
36”
36”
36”
36”
36”
36”
36”
171 lbs.
234 lbs.
297 lbs.
360 lbs.
423 lbs.
540 lbs.
100
100
100
100
100
100
Contact CSR
Contact CSR
Contact CSR
Contact CSR
Contact CSR
Contact CSR
12”x20”
PAN CAP.
WATTS
AMP
VOLTS/HERTZ/
PHASE
SHIP
WEIGHT
FREIGHT
CLASS
38”
36”
36”
2
2000
16.6
115/60/1
228 lbs.
85
52”
36”
36”
3
3000/4000
15.0/16.0
208-230/60/1
312 lbs.
85
66”
36”
36”
4
4000/5000
20.0/22.0
208-230/60/1
396 lbs.
85
80”
36”
36”
5
5000/6000
24.0/27.0
208-230/60/1
480 lbs.
85
94”
36”
36”
6
6000/7200
29.0/32.0
208-230/60/1
564 lbs.
85
CDN LIST
PRICE
Contact
CSR
Contact
CSR
Contact
CSR
Contact
CSR
Contact
CSR
Concepts Series accessories and modifications can be found on page 16-17.
Specifications and prices subject to change without notice.
5
Tel: 905-624-1419 • 888-442-7526
Fax: 905-624-1851 • 800-361-2724
For more information, visit www.garlandcanada.ca
CONCEPTS™ SERVING SYSTEMS
DCBU UNITS ONLY
•
Heavy duty stainless steel top
•
Reinforced stainless steel front and rear
removable panels
•
Heavy duty base support structure
•
Standard on 6” legs
•
36” work height
DC-H UNITS ONLY
•
Flush mount die stamped stainless steel
heated food well
•
1/2” stainless steel drains
•
Heavy duty stainless steel top
•
Reinforced stainless steel front and rear
with removable panels
•
Heavy duty base support structure
•
Standard on 6” legs
DC-IC: CONCEPTS ICE COOLED SERVING COUNTERS
DC-MC: CONCEPTS MECHANICALLY COOLED SERVING COUNTERS
Product Information
CONCEPTS™ SERVING SYSTEMS
DC-IC4
DC-MC4
DC-IC UNITS ONLY
•
NSF-7 certified performance
•
Integral V-stamp pan rest
•
Heavy duty stainless steel top
•
Reinforced stainless steel front and rear
removable panels
•
Heavy duty base support structure
•
Standard on 6” legs
•
1” drain
•
Removable perforated false bottom
•
High density foamed in place
environmentally friendly, Kyoto Protocol
Compliant, Non ODP (Ozone Depletion
Potential), Non GWP (Global Warming
Potential) polyurethane Keeps energy costs
low
One year parts and labor standard warranty
•
DC-MC UNITS ONLY
•
NSF-7 certified performance
•
Heavy duty stainless steel top
•
Reinforced stainless steel front and rear
removable panels
•
Heavy duty base support structure
•
Standard on 6” legs
•
Integral V-stamp pan rest
•
1” drain
•
Must be fixed hard wired
•
High density foamed in place
environmentally friendly, Kyoto Protocol
Compliant, Non ODP (Ozone Depletion
Potential), Non GWP (Global Warming
Potential) polyurethane keeps energy costs
low
•
Environmentally friendly HFC-134A
refrigerant
Thermostat for temperature control
•
One year parts and labor standard warranty
•
Specifications and Prices
MODEL
DESCRIPTION
NUMBER
Ice Cooled serving counters
DC-IC2
Ice cooled unit, two wells
DC-IC3
Ice cooled unit, three wells
DC-IC4
Ice cooled unit, four wells
DC-IC5
Ice cooled unit, five wells
DC-IC6
Ice cooled unit, six wells
MODEL
DESCRIPTION
NUMBER
Mechanically cooled counters
Mechanically
DC-MC2
cooled unit, two
wells
Mechanically
DC-MC3
cooled unit, three
wells
Mechanically
DC-MC4
cooled unit, four
wells
Mechanically
DC-MC5
cooled unit, five
wells
Mechanically
DC-MC6
cooled unit, six
wells
L
OVERALL
D
H
L
OVERALL
D
H
12”x20 “
PAN CAP.
SHIP
WEIGHT
FREIGHT
CLASS
CDN LIST
PRICE
38”
52”
66”
80”
94”
36”
36”
36”
36”
36”
36”
36”
36”
36”
36”
2
3
4
5
6
209 lbs.
286 lbs.
363 lbs.
440 lbs.
517 lbs.
85
85
85
85
85
Contact CSR
Contact CSR
Contact CSR
Contact CSR
Contact CSR
12”x20”
PAN CAP.
H.P.
AMP
BTU
LOAD
VOLTS/HERTZ/
PHASE
SHIP
WEIGHT
FREIGHT
CLASS
CDN LIST
PRICE
38”
36”
36”
2
1/5
4.0
379
115/60/1
323 lbs.
85
Contact
CSR
52”
36”
36”
3
1/5
4.0
569
115/60/1
442 lbs.
85
Contact
CSR
66”
36”
36”
4
1/4
7.0
758
115/60/1
561 lbs.
85
Contact
CSR
80”
36”
36”
5
1/4
7.0
948
115/60/1
680 lbs.
85
Contact
CSR
94”
36”
36”
6
1/4
7.0
1138
115/60/1
799 lbs.
85
Contact
CSR
Concepts Series accessories and modifications can be found on page 16-17.
Specifications and prices subject to change without notice.
6
Tel: 905-624-1419 • 888-442-7526
Fax: 905-624-1851 • 800-361-2724
For more information, visit www.garlandcanada.ca
DC-L: CONCEPTS LIQUITEC® SERVING COUNTERS
DC-FT: CONCEPTS FROST TOP SERVING COUNTERS
Product Information
DC-FT UNITS ONLY
•
Heavy duty stainless steel top
•
Reinforced stainless steel front and rear
removable panels
•
Heavy duty base support structure
•
Standard on 6” legs
•
18-gauge stainless steel one piece
construction and perimeter trough
•
0.5” stainless steel drain
•
Must be hard wired in field
•
One year parts and labor standard warranty
DC-L2
DC-FT4
Specifications and Prices
MODEL
DESCRIPTION
NUMBER
LiquiTec® counters
LiquiTec unit, two
DC-L2
wells
LiquiTec unit,
DC-L3
three wells
LiquiTec unit, four
DC-L4
wells
LiquiTec unit, five
DC-L5
wells
LiquiTec unit, six
DC-L6
wells
MODEL
DESCRIPTION
NUMBER
Frost Top counters
Frost top unit, 38”
DC-FT2
length
Frost top unit, 52”
DC-FT3
length
Frost top unit, 66”
DC-FT4
length
Frost top unit, 80”
DC-FT5
length
Frost top unit, 94”
DC-FT6
length
L
OVERALL
D
H
12”x20”
PAN CAP.
H.P.
AMP
BTU
LOAD
VOLTS/HERTZ/
PHASE
SHIP
WEIGHT
FREIGHT
CLASS
38”
36”
36”
2
1/4
7.0
379
115/60/1
342 lbs.
100
52”
36”
36’
3
1/4
7.0
569
115/60/1
468 lbs.
100
66”
36”
36”
4
1/4
7.0
758
115/60/1
594 lbs.
100
80”
36”
36”
5
1/4
7.0
948
115/60/1
720 lbs.
100
94”
36”
36”
6
1/4
7.0
1138
115/60/1
846 lbs.
100
L
OVERALL
D
H
H.P.
AMP
VOLTS/HERTZ/
PHASE
SHIP
WEIGHT
FREIGHT
CLASS
CDN LIST
PRICE
38”
36”
36”
1/4
7.0
115/60/1
399 lbs.
100
Contact CSR
52”
36”
36”
1/4
7.0
115/60/1
546 lbs.
100
Contact CSR
66”
36”
36”
1/4
7.0
115/60/1
693 lbs.
100
Contact CSR
80”
36”
36”
1/3
8.0
115/60/1
840 lbs.
100
Contact CSR
94”
36”
36”
1/3
8.0
115/60/1
987 lbs.
100
Contact CSR
CDN LIST
PRICE
Contact
CSR
Contact
CSR
Contact
CSR
Contact
CSR
Contact
CSR
Concepts Series accessories and modifications can be found on page 16-17.
Specifications and prices subject to change without notice.
7
Tel: 905-624-1419 • 888-442-7526
Fax: 905-624-1851 • 800-361-2724
For more information, visit www.garlandcanada.ca
CONCEPTS™ SERVING SYSTEMS
DC-L UNITS ONLY
•
Heavy duty stainless steel top
•
Reinforced stainless steel front and rear
removable panels
•
Heavy duty base support structure
•
Standard on 6” legs
•
Flush mounted pans
•
Individual 0.5” stainless steel drains
•
Thermostat for temperature control
•
High density foamed in place
environmentally friendly, Kyoto Protocol
Compliant, Non ODP (Ozone Depletion
Potential), Non GWP (Global Warming
Potential) polyurethane keeps energy costs
low
•
Must be hard wired in field
One year parts and labor standard warranty
•
DCRU: CONCEPTS RADIAL UTILITY SERVING COUNTERS
DCRU-H: CONCEPTS RADIAL HEATED SERVING COUNTERS
Product Information
CONCEPTS™ SERVING SYSTEMS
DCRU-OT
DCRU-H4
DCRU UTILITY UNITS ONLY
•
Heavy duty stainless steel top
•
Reinforced stainless steel front and rear
removable panels
•
Heavy duty base support structure
•
Standard on 6” legs
•
One year parts and labor standard warranty
•
•
•
•
Heavy duty base support structure
Standard on 6” legs
Must be fixed hard wired
11.87” x 19.87” single hot food wells
are manifolded together to one main
gate valve
Wet and dry operation
Individual infinite temperature controls
One year parts and labor standard warranty
•
•
•
DCRU-H UNITS ONLY
•
Flush mount die stamped stainless steel
heated food well
•
1/2” stainless steel drains
•
Heavy duty stainless steel top
•
Reinforced stainless steel front and rear
removable panels
Specifications and Prices
DCRU-H332
DCRU-T32
MODEL
DESCRIPTION
NUMBER
Radial utility serving counters
DCRU-O
Radial utility base, outside curve
DCRU-I
Radial utility base inside curve
DCRU-OT
Radial utility base, outside tiered curve
DCRU-IT
Radial utility base, inside tiered curve
DCRU-T25
Radial 25˚ base
DCRU-T32
Radial 32˚ base
DCRU-T40
Radial 40˚ base
DCRUO-TT25
Radial 25˚ base, tiered outside
DCRUO-TT32
Radial 32˚ base, tiered outside
DCRUO-TT40
Radial 40˚ base, tiered outside
DCRUI-TT25
Radial 25˚ base, tiered inside
DCRUI-TT32
Radial 32˚ base, tiered inside
DCRUI-TT40
Radial 40˚ base, tiered inside
MODEL
DESCRIPTION
NUMBER
Radial heated serving counters
Radial heated unit,
DCRU-H2
two wells
Radial heated unit,
DCRU-H3
three wells
Radial heated unit,
DCRU-H4
four wells
Radial heated unit,
DCRU-H5
five wells
Radius 2 pan hot unit,
DCRU-H225
25˚ angle
Radius 3 pan hot unit,
DCRU-H332
25˚ angle
Radius 4 pan hot unit,
DCRU-H440
25˚ angle
L
OVERALL
D
L
OVERALL
D
103.3”
103.3”
103.3”
103.3”
58.4”
75.6”
92.4”
58.4”
75.6”
92.4”
58.4”
75.6”
92.4”
36”
36”
36”
36”
36”
36”
36”
36”
36”
36”
36”
36”
36”
H
SHIP
WEIGHT
FREIGHT
CLASS
CDN LIST
PRICE
36”
36”
36”
36”
36”
36”
36”
36”
36”
36”
36”
36”
36”
464
464
464
464
270
345
420
270
354
420
270
345
420
100
100
100
100
100
100
100
100
100
100
100
100
100
Contact CSR
Contact CSR
Contact CSR
Contact CSR
Contact CSR
Contact CSR
Contact CSR
Contact CSR
Contact CSR
Contact CSR
Contact CSR
Contact CSR
Contact CSR
H
12”x20”
PAN CAP.
WATTS
AMP
VOLTS/HERTZ/
PHASE
SHIP
WEIGHT
FREIGHT
CLASS
CDN LIST
PRICE
103.3”
36”
36”
2
2000
16.6
115/60/1
563 lbs.
85
Contact CSR
103.3”
36”
36”
3
3000/4000
15.0/16.0
208-230/60/1
604 lbs.
85
Contact CSR
103.3”
36”
36”
4
4000/5000
20.0/22.0
208-230/60/1
645 lbs.
85
Contact CSR
103.3”
36”
36”
5
5000/6000
24.0/27.0
208-230/60/1
685 lbs.
85
Contact CSR
58.4”
36”
36”
2
2000
16.6
115/60/1
369lbs.
85
Contact CSR
75.6”
36”
36”
3
3000/4000
15.0/16.0
208-230/60/1
485lbs.
85
Contact CSR
92.4”
36”
36”
4
4000/5000
20.0/22.0
208-230/60/1
601lbs.
85
Contact CSR
Concepts Series accessories and modifications can be found on page 16-17.
Specifications and prices subject to change without notice.
8
Tel: 905-624-1419 • 888-442-7526
Fax: 905-624-1851 • 800-361-2724
For more information, visit www.garlandcanada.ca
DCRU-IC: CONCEPTS RADIAL ICE COOLED SERVING COUNTERS
DCRU-MC: CONCEPTS RADIAL MECHANICALLY COOLED SERVING
COUNTERS
Product Information
DCRU-MC UNITS ONLY
•
Must be fixed hard wired
•
Environmentally friendly HFC-134A
refrigerant
•
Thermostat for temperature control
DCRU-IC4
DCRU-MC4
Specifications and Prices
MODEL
DESCRIPTION
NUMBER
Radial ice cooled serving counters
DCRU-IC2
Radial ice cooled unit, 36” cold pan
DCRU-IC3
Radial ice cooled unit, 50” cold pan
DCRU-IC4
Radial ice cooled unit, 60” cold pan
DCRU-IC5
Radial ice cooled unit, 74” cold pan
DCRU-IC225
Radial ice cooled unit, 25˚ angle
DCRU-IC332
Radial ice cooled unit, 32˚ angle
DCRU-IC440
Radial ice cooled unit, 40˚ angle
OVERALL
MODEL
DESCRIPTION
NUMBER
L
D
Radial mechanically cooled serving counters
Radial
mechanically
DCRU-MC2
103.3” 36”
cooled unit, 36”
cold pan
Radial
mechanically
DCRU-MC3
103.3” 36”
cooled unit, 50”
cold pan
Radial
mechanically
DCRU-MC4
103.3” 36”
cooled unit, 60”
cold pan
Radial
mechanically
DCRU-MC5
103.3” 36”
cooled unit, 74”
cold pan
Radial
mechanically
DCRU-MC225
58.4” 36”
cooled unit, 25˚
angle
Radial
mechanically
DCRU-MC332
75.6” 36”
cooled unit, 32˚
angle
Radial
mechanically
DCRU-MC440
92.4” 36”
cooled unit,
40˚angle
H
L
OVERALL
D
103.3”
103.3”
103.3”
103.3”
58.4”
75.6”
92.4”
36”
36”
36”
36”
36”
36”
36”
H
12” x 20”
PAN CAP.
SHIP
WEIGHT
FREIGHT
CLASS
CDN LIST
PRICE
36”
36”
36”
36”
36”
36”
36”
2
3
4
5
2
3
4
540 lbs.
578 lbs.
616 lbs.
654 lbs.
540 lbs.
578 lbs.
616 lbs.
85
85
85
85
85
85
85
Contact CSR
Contact CSR
Contact CSR
Contact CSR
Contact CSR
Contact CSR
Contact CSR
12”x20”
H.P. AMP
PAN CAP.
BTU
LOAD
VOLTS/HERTZ/
PHASE
SHIP
WEIGHT
FREIGHT
CLASS
CDN LIST
PRICE
36”
2
1/4
7.5
379
115/60/1
604 lbs.
85
Contact
CSR
36”
3
1/4
7.5
569
115/60/1
644 lbs.
85
Contact
CSR
36”
4
1/4
7.5
758
115/60/1
684 lbs.
85
Contact
CSR
36”
5
1/4
7.5
948
115/60/1
724 lbs.
85
Contact
CSR
36”
2
1/5
4.0
379
115/60/1
410 lbs.
85
Contact
CSR
36”
3
1/5
4.0
569
115/60/1
525 lbs.
85
Contact
CSR
36”
4
1/4
7.5
758
115/60/1
640 lbs.
85
Contact
CSR
DCRU-IC332
DCRU-MC440
Concepts Series accessories and modifications can be found on page 16-17.
Specifications and prices subject to change without notice.
9
Tel: 905-624-1419 • 888-442-7526
Fax: 905-624-1851 • 800-361-2724
For more information, visit www.garlandcanada.ca
CONCEPTS™ SERVING SYSTEMS
All Units
•
NSF-7 certified performance
•
Heavy duty stainless steel top
•
Reinforced stainless steel front and rear
removable panels
•
Heavy duty base support structure
•
Standard on 6” legs
•
Stainless steel pan clip
•
1” drain
•
High density foamed in place environmentally
friendly, Kyoto Protocol Compliant, Non ODP (Ozone
Depletion Potential), Non GWP (Global Warming
Potential) polyurethane keeps energy costs low
•
One year parts and labor standard warranty
DCRU-IC UNITS ONLY
•
Stainless steel pan clip
•
Removable perforated false bottom
DCRU-L: CONCEPTS LIQUITEC® SERVING COUNTERS
Product Information
•
•
CONCEPTS™ SERVING SYSTEMS
DCRU-L3
•
•
•
•
•
•
•
•
Heavy duty stainless steel top
Reinforced stainless steel front and rear
removable panels
Heavy duty base support structure
Standard on 6” legs
Flush mounted pans
Individual 0.5” stainless steel drains
Thermostat for temperature control
High density foamed in place
environmentally friendly, Kyoto Protocol
Compliant, Non ODP (Ozone Depletion
Potential), Non GWP (Global Warming
Potential) polyurethane keeps energy
costs low
Must be hard wired in field
One year parts and labor standard warranty
Specifications and Prices
MODEL
DESCRIPTION
NUMBER
LiquiTec® counters
Radial unit with
DCRU-L1
LiquiTec, one pan
Radial unit with
DCRU-L2
LiquiTec, two
pans
Radial unit with
LiquiTec, single
DCRU-L3
pan and double
pan
Radial unit with
DCRU-L4
LiquiTec, two
double pans
L
OVERALL
D
H
12”x20”
H.P.
PAN CAP.
AMP
BTU
LOAD
VOLTS/HERTZ/
PHASE
SHIP
WEIGHT
FREIGHT
CLASS
CDN LIST
PRICE
103.3”
36” 36”
1
1/4
7.5
292
115/60/1
633 lbs.
100
Contact
CSR
103.3”
36” 36”
2
1/4
7.5
379
115/60/1
679 lbs.
100
Contact
CSR
103.3”
36” 36”
1&2
1/4
7.5/ 7.5
292/379
115/60/1
848 lbs.
100
Contact
CSR
103.3”
36” 36”
2&2
1/4
7.5/ 7.5
379/379
115/60/1
897 lbs.
100
Contact
CSR
Concepts Series accessories and modifications can be found on page 16-17.
Specifications and prices subject to change without notice.
10
Tel: 905-624-1419 • 888-442-7526
Fax: 905-624-1851 • 800-361-2724
For more information, visit www.garlandcanada.ca
DC-T: CONCEPTS TRANSITION SERVING COUNTERS
DCRU-T: CONCEPTS RADIAL TRANSITION SERVING COUNTERS
Product Information
•
•
•
•
•
Heavy duty stainless steel top
Reinforced stainless steel front and rear
removable panels
Heavy duty base support structure
Standard on 6” legs
One year parts and labor standard warranty
DC-TT45
Specifications and Prices
22 degree transition piece
45 degree transition piece
90 degree transition piece
45 degree transition piece, tiered
90 degree transition piece, tiered
Radial transition counters
DCRU-T22
Radial 22 degree transition piece
DCRU-T45
Radial 45 degree transition piece
DCRU-T90
Radial 90 degree transition piece
DCRU-TT45
Radial 45 degree transition piece, tiered
DCRU-TT90
Radial 90 degree transition piece, tiered
DC-T22
DC-T45
DC-T90
DC-TT45
DC-TT90
L
OVERALL
D
H
SHIP
WEIGHT
FREIGHT
CLASS
CDN LIST
PRICE
25.81”
38.64”
59.40”
38.64”
59.40”
36”
36”
36”
36”
36”
36”
36”
36”
36”
36”
86 lbs.
171 lbs.
315 lbs.
171 lbs.
315 lbs.
100
100
100
100
100
Contact CSR
Contact CSR
Contact CSR
Contact CSR
Contact CSR
18.92”
37.12”
68.59”
37.12”
68.59”
36”
36”
36”
36”
36”
36”
36”
36”
36”
36”
86 lbs.
171 lbs.
315 lbs.
171 lbs.
315 lbs.
100
100
100
100
100
Contact CSR
Contact CSR
Contact CSR
Contact CSR
Contact CSR
DESCRIPTION
DCRU-T90
Concepts Series accessories and modifications can be found on page 16-17.
Specifications and prices subject to change without notice.
11
Tel: 905-624-1419 • 888-442-7526
Fax: 905-624-1851 • 800-361-2724
For more information, visit www.garlandcanada.ca
CONCEPTS™ SERVING SYSTEMS
MODEL
NUMBER
Transition counters
DCCS-SD: CONCEPTS SINGLE DRAWER CASH COUNTERS
DCCS-DD: CONCEPTS DUAL DRAWER CASH COUNTERS
Product Information
•
•
DCCS-SDW
•
•
•
•
CONCEPTS™ SERVING SYSTEMS
•
•
Heavy duty stainless steel top
Reinforced stainless steel front and rear
removable panels
Heavy duty base support structure
Standard on 6” legs
2” grommet hole in top to allow cord access
for cash registers
Stainless steel locking cash drawer(s)
standard
120V-15A duplex (GFCI) receptacle, Nema
5-15R 15.0A breaker
One year parts and labor standard warranty
DCCS-DDWR
Specifications and Prices
MODEL
NUMBER
Single drawer cash counters
DCCS-SDRWL
DCCS-DDRWR
DESCRIPTION
Single drawer cashier station
Single drawer cashier station with wing walls
Single drawer cashier station with wing wall left
Single drawer cashier station with wing wall right
Single drawer radial cashier station, 48”
Single drawer radial cashier station with wing walls, 48”
Single drawer radial cashier station with wing wall
DCCS-SDRWL
left, 48”
Single drawer radial cashier station with wing wall
DCCS-SDRWR
right, 48”
Dual drawer cash counters
DCCS-DD
Dual drawer cashier station
DCCS-DDW
Dual drawer cashier station with wing walls
DCCS-DDWL
Dual drawer cashier station with wing wall left
DCCS-DDWR
Dual drawer cashier station with wing wall right
DCCS-DDR
Dual drawer radial cashier station, 72”
DCCS-DDRW
Dual drawer radial cashier station with wing walls, 72”
Dual drawer radial cashier station with wing wall left,
DCCS-DDRWL
72”
Dual drawer radial cashier station with wing wall right,
DCCS-DDRWR
72”
DCCS-SD
DCCS-SDW
DCCS-SDWL
DCCS-SDWR
DCCS-SDR
DCCS-SDRW
L
OVERALL
D
H
SHIP
WEIGHT
FREIGHT
CLASS
CDN LIST
PRICE
45”
45”
45”
45”
48”
48”
36”
36”
36”
36”
36”
36”
36”
36”
36”
36”
36”
36”
270 lbs.
350 lbs.
310 lbs.
310 lbs.
310 lbs.
390 lbs.
100
100
100
100
100
100
Contact CSR
Contact CSR
Contact CSR
Contact CSR
Contact CSR
Contact CSR
48”
36”
36”
350 lbs.
100
Contact CSR
48”
36”
36”
350 lbs
100
Contact CSR
72”
72”
72”
72”
72”
72”
36”
36”
36”
36”
36”
36”
36”
36”
36”
36”
36”
36”
540 lbs.
620 lbs.
580 lbs.
580 lbs.
580 lbs.
660 lbs.
100
100
100
100
100
100
Contact CSR
Contact CSR
Contact CSR
Contact CSR
Contact CSR
Contact CSR
72”
36”
36”
620 lbs.
100
Contact CSR
72”
36”
36”
620 lbs
100
Contact CSR
Concepts Series accessories and modifications can be found on page 16-17.
Specifications and prices subject to change without notice.
12
Tel: 905-624-1419 • 888-442-7526
Fax: 905-624-1851 • 800-361-2724
For more information, visit www.garlandcanada.ca
DC-TM: CONCEPTS TOWER END SERVING COUNTERS
DCDM: CONCEPTS DISPLAY MERCHANDISER COUNTERS
DCHS: CONCEPTS HANDSINK SERVING COUNTERS
Product Information
DC-TM
•
•
•
•
•
•
•
•
DCHS
Heavy duty stainless steel top
Reinforced stainless steel front and rear
removable panels
Heavy duty base support structure
Standard on 6” flanged feet, unit must be
bolted to the floor
36” work height
Laminated upper
Removable interior stainless steel panels
Standard with 5-20 GFCI outlet
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
DCDM
•
•
•
•
Laminated ends, front, back
Two removable laminated shelves
Laminated shelves are adjustable and able
to be slanted or flat
Black poly shelf supports
Heavy duty stainless steel top
Reinforced stainless steel front and rear
removable panels
Heavy duty base support structure
Standard on 6” legs
36” work height
Three sided removable stainless steel riser
Deck mount faucet
Finished stainless steel panels
Soap dispenser
On board water pump
On board 2 1/2 gallon water heater
(2) 5 gallon fresh water containers
(2) 7 1/2 gallon waste water containers
Cord and 5-15P plug
9” x 14” x 5” sink
All Units
•
One year parts and labor standard warranty
DCDM-36
L
D
H
SHIP
WEIGHT
FREIGHT CLASS
CDN LIST
PRICE
38”
36”
83.62”
350
100
Contact CSR
66”
36”
83.62”
608
100
Contact CSR
xx
36”
83.63”
10/inch
100
Contact CSR
24”
20”
36”
150
100
Contact CSR
36’
20”
36”
225
100
Contact CSR
31.13”
51”
28”
36”
22”
36”
220
454
100
100
Contact CSR
Contact CSR
Shown with radial top,
and bottom shelf
DCHS-51
Concepts Series accessories and modifications can be found on page 16-17.
Specifications and prices subject to change without notice.
13
Tel: 905-624-1419 • 888-442-7526
Fax: 905-624-1851 • 800-361-2724
For more information, visit www.garlandcanada.ca
CONCEPTS™
Specifications and Prices
MODEL
DESCRIPTION
NUMBER
Tower/End Modules
Roll in (operator side) tower module
DCTM-38RI
38” length
Roll in (operator side) tower module
DCTM-66RI
66” length
DCTM-RI
Roll in (operator side) tower module
Display Merchandiser
Display Merchandiser, Full Front
DCDM-24
(Customer Self Service)
Display Merchandiser, Full Front
DCDM-36
(Customer Self Service)
Handsink
DCHS-DI
Drop In handsink module
DCHS-51
Handsink module
DCT-38RI
DCBU: CONCEPTS RADIAL UTILITY COUNTERS
DCBC: CONCEPTS RADIAL BEVERAGE COUNTERS
Product Information
•
•
DCBU-48R
•
•
•
•
Heavy duty stainless steel top
Reinforced stainless steel front and rear
removable panels
Heavy duty base support structure
Standard on 6” legs
36” work height
One year parts and labor standard warranty
DCBC-48R
CONCEPTS™
Shown with optional urn
trough
Specifications and Prices
MODEL
DESCRIPTION
NUMBER
Radial Front Utility Module
DCBU-48R
Curved utility module, 48”L
DCBU-72R
Curved utility module, 72”L
DCBU-96R
Curved utility module, 96”L
DCBU-120R
Curved utility module, 120”L
Beverage Counter
Beverage Bar, curved 48” L with
DCBC-48R
hinged locking doors
Beverage Bar, curved 72” L with
DCBC-72R
hinged locking doors
Beverage Bar, curved 96” L with
DCBC-96R
hinged locking doors
Beverage Bar, curved 120”L with
DCBC-120R
hinged locking doors
Linear Beverage Bar Module with
DCBC-XX
hinged locking doors
L
D
H
SHIP
WEIGHT
FREIGHT CLASS
CDN LIST
PRICE
48
72
96
12
44
44
44
44
36
36
36
36
297
360
423
540
100
100
100
100
Contact CSR
Contact CSR
Contact CSR
Contact CSR
48
44
36
397
100
Contact CSR
72
44
36
460
100
Contact CSR
96
44
36
523
100
Contact CSR
12
44
36
640
100
Contact CSR
xx
44
36
8/inch
100
Contact CSR
Concepts Series accessories and modifications can be found on page 16-17.
Specifications and prices subject to change without notice.
14
Tel: 905-624-1419 • 888-442-7526
Fax: 905-624-1851 • 800-361-2724
For more information, visit www.garlandcanada.ca
N8000-R: DROP-IN CURVED ICE COOLED COLD PAN
N8100-BR: DROP-IN CURVED MECHANICALLY COOLED COLD PAN
N8700-R: DROP-IN CURVED HEATED ELECTRIC FOOD WELLS
Product Information
•
1” drain standard
•
Thermostat for temperature control
•
One year parts and labor standard warranty
N8700-R UNITS ONLY
•
Top is constructed of 18-gauge stainless steel
•
Flush mounted die stamped drawn 12”x20”
individual 20-gauge wells
•
Wells depressed slightly into the top to hold
condensation
•
Standard 1/2” stainless steel drain(s)
•
Non-marring press fit top gasket
•
Must be hard wired in the field
•
Wet and dry operation
•
11.87”x19.87” single hot food wells are
manifolded together standard to one main
gate valve
Unit shall be insulated on all sides with 1” of
•
fiberglass and bottom to have 2” of fiberfrax
blanket insulation
Individual infinite temperature controls
•
standard wired to one main control panel
with 4’ of conduit and wire. Field install
control panel at location
Galvanized exterior body
•
One year parts and labor standard warranty
•
N8094-R
N8194-BR
N8794-R
Specifications and Prices
OVERALL
MODEL
NUMBER
L
D
Ice cooled curved drop-in
N8044-R
40.48” 26.05”
N8059-R
57.22” 26.05”
N8076-R
73.68” 26.05”
N8094-R
89.89” 26.05”
H
12”x20”
PAN CAP.
SHIP
WEIGHT
FREIGHT
CLASS
CDN LIST
PRICE
10.77”
10.77”
10.77”
10.77”
2
3
4
5
100 lbs.
118 lbs.
145 lbs.
164 lbs.
85
85
85
85
$1,940
$2,220
$2,600
$2,900
OVERALL
MODEL
NUMBER
L
D
H
Mechanically cooled curved drop-in
N8144-BR
40.48” 26.05” 10.77”
N8159-BR
57.22” 26.05” 10.77”
N8176-BR
73.68” 26.05” 10.77”
N8194-BR
89.89” 26.05” 10.77”
OVERALL
MODEL
NUMBER
L
D
Heated curved drop ins
N8744-R
40.48” 26.05”
N8759-R
57.22” 26.05”
N8776-R
73.68” 26.05”
N8794-R
89.80” 26.05”
12”x20”
PAN CAP.
H.P. AMP
BTU
LOAD
VOLTS/HERTZ/
PHASE
NEMA
PLUG
SHIP
WEIGHT
FREIGHT
CLASS
CDN LIST
PRICE
2
3
4
5
1/5
1/5
1/4
1/4
379
569
758
948
115/60/1
115/60/1
115/60/1
115/60/1
5-15P
5-15P
5-15P
5-15P
161 lbs.
184 lbs.
233 lbs.
243 lbs.
85
85
85
85
$4,960
$5,665
$6,090
$6,620
H
12”x20”
PAN CAP.
AMP
WATTS
VOLTS/HERTZ/
PHASE
SHIP
WEIGHT
FREIGHT
CLASS
CDN LIST
PRICE
9.08”
9.08”
9.08”
9.08”
2
3
4
5
16.6
15.0/16.0
20.0/22.0
24.0/27.0
2000
3000/4000
4000/4800
5000/6000
120/60/1
208-230/60/1
208-230/60/1
208-230/60/1
99 lbs.
134 lbs.
166 lbs.
186 lbs.
85
85
85
85
$3,085
$4,370
$5,685
$6,990
4.0
4.0
7.0
7.0
Specifications and prices subject to change without notice.
15
Tel: 905-624-1419 • 888-442-7526
Fax: 905-624-1851 • 800-361-2724
For more information, visit www.garlandcanada.ca
CONCEPTS™ SERVING SYSTEMS
N8000-R UNITS ONLY
•
NSF certified
•
A stainless steel holding clip adjusts for pans
•
Push-in perimeter gasket
•
1” drain standard
•
High density foamed in place
environmentally friendly, Kyoto Protocol
Compliant, Non ODP (Ozone Depletion
Potential), Non GWP (Global Warming
Potential) polyurethane keeps energy costs
low
•
Removable perforated, false bottom
•
One year parts and labor standard warranty
N8100-BR UNITS ONLY
NSF-7 certified performance
•
A stainless steel holding clip adjusts for pans
•
High density foamed in place
•
environmentally friendly, Kyoto Protocol
Compliant, Non ODP (Ozone Depletion
Potential), Non GWP (Global Warming
Potential) polyurethane keeps energy
costs low
Push-in perimeter gasket
•
Stainless steel louver provided
•
Environmentally friendly HFC-134A
•
refrigerant
CONCEPTS™ ACCESSORIES AND MODIFICATIONS
CONCEPTS™ SERVING SYSTEMS
Trayslides
DCTS-SV Stainless Steel “V” Tray Slide..........................................................Contact CSR
DCTS-3B 3-Bar S/S Tray Slide...........................................................................Contact CSR
DCTS-3BR 3-Bar radial S/S Tray Slide............................................................Contact CSR
DCTS-SS Solid Surface Tray Slide...................................................................Contact CSR
DCTS-SSR Solid Surface Tray Slide, with s/s runners..............................Contact CSR
DCTS-SSE Solid Surface Extension as Tray Slide
with s/s runners.................................................................................................Contact CSR
DCTS-GT Granite Top Extension as Tray Slide...........................................Contact CSR
DCTS-GTR Granite Top Extension as Tray Slide,
with s/s runners.................................................................................................Contact CSR
DCTSF-3B-22 3 Bar 22 degree corner filler tray slide ............................Contact CSR
DCTSF-3B-25 3 Bar 25 degree corner filler tray slide ............................Contact CSR
DCTSF-3B-32 3 Bar 32 degree corner filler tray slide ............................Contact CSR
DCTSF-3B-40 3 Bar 40 degree corner filler tray slide ............................Contact CSR
DCTSF-3B-45 3 Bar 45 degree corner filler tray slide ............................Contact CSR
DCTSF-3B-90 3 Bar 90 degree corner filler tray slide ...........................Contact CSR
DCTSF-SS-22 Solid Surface 22 degree corner filler tray slide ............Contact CSR
DCTSF-SS-25 Solid Surface 25 degree corner filler tray slide ............Contact CSR
DCTSF-SS-32 Solid Surface 32 degree corner filler tray slide ............Contact CSR
DCTSF-SS-40 Solid Surface 40 degree corner filler tray slide ............Contact CSR
DCTSF-SS-45 Solid Surface 45 degree corner filler tray slide ............Contact CSR
DCTSF-SS-90 Solid Surface 90 degree corner filler tray slide.............Contact CSR
Workshelves
DCWS-10 10” stainless steel workshelf........................................................Contact CSR
DCWS-12 12” stainless steel workshelf........................................................Contact CSR
Base Finishes
DCSE S/S Finished End Panel...........................................................................Contact CSR
DCLE Laminate End Panel.................................................................................Contact CSR
DCLF Laminate Front Panel, Standard laminates
(Wilsonart, Nevamar, Formica and Pionite)..............................................................N/C
DCLB Laminate Back Panel, Standard laminates
(Wilsonart, Nevamar, Formica and Pionite)..............................................................N/C
DCLFC Laminate Front Panel, Custom laminates
(any metalics, Chemetal)................................................................................Contact CSR
DCLBC Laminate Back Panel, Custom laminates
(any metalics, Chemetal)................................................................................Contact CSR
DCKP S/S or Laminated kick plate.................................................................Contact CSR
DCKPR S/S or Laminated kick plate return.................................................Contact CSR
Top Materials
DCTG Granite Top Material...............................................................................Contact CSR
DCTH Hanstone Top Material .........................................................................Contact CSR
DCTC Corian Top Material.................................................................................Contact CSR
DCTA Avonite Top Material..............................................................................Contact CSR
DCTD Diamond Top Material...........................................................................Contact CSR
DCTM Solid Surface Top Material - TBD.......................................................Contact CSR
Specifications and prices subject to change without notice.
16
Top/Base Accessories
DCC Casters in lieu of Legs...............................................................................Contact CSR
DCTC Top Cutouts................................................................................................Contact CSR
DCBS Stainless steel backsplash....................................................................Contact CSR
DCBSR Stainless steel backsplash return....................................................Contact CSR
DCSSBS Solid surface backsplash..................................................................Contact CSR
DCSSBSR Solid surface backsplash return.................................................Contact CSR
DCDP Décor Panels.............................................................................................Contact CSR
DCPGDP Colored Plexiglas stand off decor panel...................................Contact CSR
DCPGDPG Plexiglas stand off decor panel with graphic......................Contact CSR
DCPGLP Plexiglas laminated stand off décor panel...............................Contact CSR
DCBLP LED ligh panel for Décor Panel .......................................................Contact CSR
DCPSL26 Builtin plate shelf linear 26” (2-pan)..........................................Contact CSR
DCPSL42 Builtin plate shelf linear 42” (3-pan)..........................................Contact CSR
DCPSL56 Builtin plate shelf linear 56” (4-pan)..........................................Contact CSR
DCPSRO Builtin plate shelf radial outside 42”...........................................Contact CSR
DCPSRI Builtin plate shelf radial inside 32”................................................Contact CSR
DCGS Subtop in lieu of stainless stell top...................................................Contact CSR
DCLED LED under nosing lighting................................................................Contact CSR
DCFF Manual Fill Faucet.................................................................................Contact CSR
DCFH 2” Ferruled Hole....................................................................................Contact CSR
DCGH 3” Grommeted Hole............................................................................Contact CSR
DCEO 115V/15A Outlet with 10amp Breaker.........................................Contact CSR
DCDO Deck Mount Outlets...........................................................................Contact CSR
DCC Casters in lieu of Legs...........................................................................Contact CSR
DCCO Top Cutouts............................................................................................Contact CSR
DCBPA 100-200 amp panel box
(cost of housing not included)..................................................Contact CSR
DCBPB Circuit-non-ground fault
(includes breaker, conduit, wire).............................................Contact CSR
DCBPC Circuit-ground fault...........................................................................Contact CSR
DCLRI Linear Roll-In Section..........................................................................Contact CSR
Base Inserts/Doors
DCOS-12 Openshelf Insert, 9” high...............................................................Contact CSR
DCOS-18 Openshelf Insert, 9” high...............................................................Contact CSR
DCOS-24 Openshelf Insert, 9” high...............................................................Contact CSR
DCOS-36 Openshelf Insert, 9” high...............................................................Contact CSR
DCOS-48 Openshelf Insert, 9” high...............................................................Contact CSR
DCOS-H12 Openshelf Insert, 15” high.........................................................Contact CSR
DCOS-H18 Openshelf Insert, 15” high.........................................................Contact CSR
DCOS-H24 Openshelf Insert, 15” high.........................................................Contact CSR
DCOS-H36 Openshelf Insert, 15” high.........................................................Contact CSR
DCOS-H48 Openshelf Insert, 15” high.........................................................Contact CSR
DCID Inlay Access Door.....................................................................................Contact CSR
DCSD-36 Sliding Door Insert...........................................................................Contact CSR
DCSD-48 Sliding Door Insert...........................................................................Contact CSR
DCDS-S18 Single Door Dry Storage Insert.................................................Contact CSR
DCDS-S24 Single Door Dry Storage Insert.................................................Contact CSR
DCDS-D36 Double Door Dry Storage Insert..............................................Contact CSR
DCDS-D48 Double Door Dry Storage Insert..............................................Contact CSR
DCMA-S Single Mechanical Access Door....................................................Contact CSR
DCMA-D Double Mechanical Access Doors...............................................Contact CSR
DCMA-L Louvered Mechanical Access Door..............................................Contact CSR
DCRI Refrigerated Base Insert.........................................................................Contact CSR
DCHI-S Single Section Heated Base Insert.................................................Contact CSR
DCHI-D Double Section Heated Base Insert..............................................Contact CSR
Tel: 905-624-1419 • 888-442-7526
Fax: 905-624-1851 • 800-361-2724
For more information, visit www.garlandcanada.ca
CONCEPTS™ ACCESSORIES AND MODIFICATIONS
Heated Black Glass Shelf (HBGB)
Cashier Counter Accessories
DCHB-24 24” Heated Black Glass Surface...................................................Contact CSR
DCHB-30 30” Heated Black Glass Surface...................................................Contact CSR
DCHB-36 36” Heated Black Glass Surface...................................................Contact CSR
DCHB-48 48” Heated Black Glass Surface...................................................Contact CSR
DCHB-60 60” Heated Black Glass Surface...................................................Contact CSR
DCHB-72 72” Heated Black Glass Surface...................................................Contact CSR
DCCPU45 CPU housing - 45”L Base...............................................................Contact CSR
DCCPU72 CPU housing - 72”L Base...............................................................Contact CSR
DCFRS s/s dia. foot rest with shelf .................................................................Contact CSR
DCFR s/s dia. foot rest without shelf..............................................................Contact CSR
DCPOS Pull out shelf in base............................................................................Contact CSR
Signage/Overstructures
Heated Stone surface (GRSSB)
Tower Upper Structure options
DCDEB Dry erase board.....................................................................................Contact CSR
DCSBG Sintra board with graphics................................................................Contact CSR
DCFPMB Non-Illuminated Flexcover panel menu board......................Contact CSR
DCMB Non-Illuminated menu board...........................................................Contact CSR
DCLCDMB32 LCD Menu board - 32”.............................................................Contact CSR
DCLCDMB42 LCD Menu board - 42”.............................................................Contact CSR
DCTL2 Directional lighting
(track lighting w/ black gooseneck lights ) - 2 lights ..............................Contact CSR
DCTL3 Directional lighting
(track lighting w/ black gooseneck lights ) - 3 lights...............................Contact CSR
DCUSGP Graphic package...............................................................................Contact CSR
DCUPO Interior outlet options for roll-in units.........................................Contact CSR
Display Case Module
DCDCGP Graphic package...............................................................................Contact CSR
DCDCTGS Tempered glass shelves in lieu of laminated shelves........Contact CSR
DCDCRB Radial front on bottom laminated shelf ..................................Contact CSR
DCDCRT Radial top.............................................................................................Contact CSR
DCDCWPS White poly shelf supports..........................................................Contact CSR
Hand Sink Module
DCPTH Paper towel holder - Bobrick Model B26212..............................Contact CSR
Radial Front Utility Module & Beverage Counter
DCBCTM-12 Beverage Bar, Tower Module Accessory............................Contact CSR
DCBS Backsplash .................................................................................................Contact CSR
DCBSRL Backsplash Return left......................................................................Contact CSR
DCBSRR Backsplash Return right...................................................................Contact CSR
DCT Tower module..............................................................................................Contact CSR
DCTRHD Hinged door internal access to waste receptacle.................Contact CSR
DCTRC Round top cutout with 16” x 11” x 20”
tall waste receptacle............................................................................................Contact CSR
DCTRCB Round cutout in base.......................................................................Contact CSR
DCCD Cup dispenser..........................................................................................Contact CSR
DCLO Lid organizer.............................................................................................Contact CSR
DCSO Straw organizer........................................................................................Contact CSR
DCND Napkin dispensers for standard napkin:
full fold, 4-1/2” x 5” – 6-1/2” ..............................................................................Contact CSR
DCSD Soufflé’ cup dispensers –
Dispense-Rite for ¾ to 2-1/2 oz. portions....................................................Contact CSR
DCCP Condiment pump....................................................................................Contact CSR
DCOU Open shelf understorage.....................................................................Contact CSR
DCOUI Open shelf understorage with intermediate shelf....................Contact CSR
DCLHD Locking full height hinged door dry base fronts......................Contact CSR
DCDW Dry storage well – 12” x 20” x 6-1/2” deep....................................Contact CSR
Specifications and prices subject to change without notice.
17
Tel: 905-624-1419 • 888-442-7526
Fax: 905-624-1851 • 800-361-2724
For more information, visit www.garlandcanada.ca
CONCEPTS™ SERVING SYSTEMS
DCOA-XX Adjustable Height Overstructure with Vertical
Signage Board with graphic..........................................................................Contact CSR
DCOF-XX Fixed Height Overstructure with Vertical
Signage Board with graphic..........................................................................Contact CSR
DCOW-XX Wall Mount Overstructure with Vertical
Signage Board with graphic..........................................................................Contact CSR
DCORF Radial Fixed Height Overstructure with Vertical
Radial Signage Board with graphic, Radial base....................................Contact CSR
DCORA Radial Adjustable Height Overstructure with Vertical
Radial Signage Board with graphic, Radial base....................................Contact CSR
DCORFT Radial Fixed Height Overstructure with Vertical
Radial Signage Board with graphic, 90˚ base..........................................Contact CSR
DCORAT Radial Adjustable Height Overstructure with Vertical
Radial Signage Board with graphic, 90˚ base..........................................Contact CSR
DCOCP Custom Powdercoat for Overstructure........................................Contact CSR
DCSDS Dual Sided Signage..............................................................................Contact CSR
DCSAD Signage Angled Down.......................................................................Contact CSR
DCSAU Signage Angled Up.............................................................................Contact CSR
DCSPTF Perforated Horizontal Top, Flat......................................................Contact CSR
DCSPTU Perforated Horizontal Top, Arched Up.......................................Contact CSR
DCSPTD Perforated Horizontal Top, Arched Down.................................Contact CSR
DCSRT Signage Removable with Thumbscrews......................................Contact CSR
DCSP Powdercoated Vertical Sinage Board with graphic in
lieu of standard .................................................................................................Contact CSR
DCSPA Perforated Powdercoated Aluminum Vertical Signage
Backer (in lieu of Standard Signage Board and graphic).....................................N/C
DCSSR Shaped Signage with Backer, Round with
Laminate or Graphic.........................................................................................Contact CSR
DCSSO Shaped Signage with Backer, Oval with
Laminate or Graphic.........................................................................................Contact CSR
DCSST Shaped Signage with Backer, Triangle with
Laminate or Graphic ........................................................................................Contact CSR
DCSSS Shaped Signage with Backer, Square with
Laminate or Graphic.........................................................................................Contact CSR
DCCA-XX Adjustable Height Canopy with Graphics...............................Contact CSR
DCCF-XX Fixed Height Canopy with Graphics..........................................Contact CSR
DCCW-XX Wall Mount Canopy with Graphics...........................................Contact CSR
DCDL Décor Heat Lamp.....................................................................................Contact CSR
DCGL Gooseneck Light......................................................................................Contact CSR
DCHS-24 24” Heated Stone surface..............................................................Contact CSR
DCHS-30 30” Heated Stone surface..............................................................Contact CSR
DCHS-3636” Heated Stone surface...............................................................Contact CSR
DCHS-48 48” Heated Stone surface..............................................................Contact CSR
DCHS-60 60” Heated Stone surface..............................................................Contact CSR
DCHS-72 72” Heated Stone surface..............................................................Contact CSR
Colors Available: Gray Granite, Bermuda Sand, Night Sky, Sawgrass
FLEXISHIELD® FOOD SHIELDS
Product Information
•
•
DCFSG
DELFIELD FLEXISHIELD® FOOD SHIELDS
Single tier glass front protector
•
•
Mostly glass display allows you to see product
from every angle
Standard construction is 1” diameter stainless
steel tubular legs. 1/4” tempered glass fronts
and end glass. 3/8” tempered glass top shelf
Comes fully assembled
Standard bright chrome finish and black
•
•
•
powdercoat
End glass is standard on all food shields
A complete line of accessories including
stainless steel shelves, heat lamps and lighting
All models meet NSF 2011 requirements.
Specifications and Prices
MODEL
NUMBER
DESCRIPTION
PER LINEAR INCH
PRICING
DCFSG
DCFSG2
Glass front food shield, single tier with glass shelf, single service
Glass front food shield, double tier with two glass shelves, single service
$55
$100
DCFSSS
Glass front food shield, slicer shield style
$40
DCFSH
DCFSHD
DCFSFS
DCFSFS2
DCFSKS
DCFSKD
DCFSGH
DCFSHG
Two tier display, sneeze guard, single service
Two tier display with sneeze guard, dual service
Flexible shield, converts to three positions
Flexible shield, converts to three positions, two tier
Single tier display, fixed sneeze guard front, single service
Single tier display, fixed sneeze guard front, dual service
Double tier display, bottom tier full glass front, second tier sneeze guard
Double tier display, bottom tier sneeze guard, second tier full glass front
$75
$110
$80
$105
$50
$55
$90
$90
MODEL
NUMBER
Flexishield Display
DCFSCR
DCFSCRD
DCFSOS-XX
DCFSOS2-XX
DESCRIPTION
Corner Flexishield, 24” 90 degree with radius front edge, single tier
Corner Flexishield, 24” 90 degree with radius front edge, double tier
Overshelf with radial front edge, single tier
Overshelf with radial front edge, double tier
Accessory Options
DCFSFL
DCFHL
DCFSSL
DCFSSHELF
DCFSLED
Black Powdercoating
DCFSBP-G
DCFSBP-G2
DCFSBP-SS
DCFSBP-H
DCFSBP-HD
DCFSBP-FS
DCFSBP-FS2
DCFSBP-KD
DCFSBP-KS
DCFSBP-GH
DCFSBP-HG
L
W
H
CDN LIST
PRICE
24.00
24.00
xx
xx
24.00
24.00
18.00
18.00
16.00
26.00
16.00
26.00
$2,695
$5,385
Contact CSR
Contact CSR
Per Linear Inch
Fluorescent light with on/off switch......................................................................................................................................... $25
Radiant heat lamp with switch................................................................................................................................................. $25
Slim line heat lamps with on/off switch.................................................................................................................................... $25
Stainless steel shelf....................................................................................................................................................................N/C
LED light................................................................................................................................................................................... $25
G Style food shield.................................................................................................................................................................... $15
G2 Style food shield.................................................................................................................................................................. $25
SS Style food shield................................................................................................................................................................... $15
H Style food shield.................................................................................................................................................................... $25
HD Style food shield.................................................................................................................................................................. $35
FS Style food shield................................................................................................................................................................... $15
FS2 Style food shield................................................................................................................................................................. $25
KD Style food shield.................................................................................................................................................................. $15
KS Style food shield................................................................................................................................................................... $15
GH Style food shield.................................................................................................................................................................. $25
HG Style food shield.................................................................................................................................................................. $25
Specifications and prices subject to change without notice.
18
Tel: 905-624-1419 • 888-442-7526
Fax: 905-624-1851 • 800-361-2724
For more information, visit www.garlandcanada.ca
DCFSR: RADIAL FLEXISHIELD® FOOD SHIELD
Product Information
•
•
•
•
•
Mostly glass display allows you to see
product from every angle
1” stainless steel legs
Meets 2011 NSF requirements
Flange mounted foot makes installation
easy
Comes fully assembled from factory
•
•
Standard end glass
One year parts and labor standard warranty
DCFSRIG-3
MODEL
DESCRIPTION
NUMBER
Radial FlexiShield foodshields
Radial food shield, full glass front, inside,
DCFSRIG-2
single service, 2 pan
Radial food shield, full glass front, inside,
DCFSRIG-3
single service, 3 pan
Radial
food
shield, full glass front, inside,
DCFSRIG-4
single service, 4 pan
Radial food shield, full glass front, inside
DCFSRIG-5
single service 5 pan
Radial
food
shield, full glass front, outside,
DCFSROG-2
single service, 2 pan
Radial food shield, full glass front, outside,
DCFSROG-3
single service, 3 pan
Radial
food
shield, full glass front, outside,
DCFSROG-4
single service, 4 pan
Radial food shield, full glass front, outside
DCFSROG-5
single service 5 pan
Radial food shield, sneeze guard front,
DCFSRIKS-2
inside, single service, 2 pan
Radial
food shield, sneeze guard front,
DCFSRIKS-3
inside, single service, 3 pan
Radial food shield, sneeze guard front,
DCFSRIKS-4
inside, single service, 4 pan
Radial
food shield, sneeze guard front,
DCFSRIKS-5
inside single service 5 pan
Radial food shield, sneeze guard front,
DCFSROKS-2
outside, single service, 2 pan
Radial
food shield, sneeze guard front,
DCFSROKS-3
outside, single service, 3 pan
Radial food shield, sneeze guard front,
DCFSROKS-4
outside, single service, 4 pan
Radial food shield, sneeze guard front,
DCFSROKS-5
outside single service 5 pan
Radial
food
shield, sneeze guard front, dual
DCFSRKD-2
service, 2 pan
Radial food shield, sneeze guard front, dual
DCFSRKD-3
service, 3 pan
Radial
food
shield,
sneeze guard front, dual
DCFSRKD-4
service, 4 pan
Radial food shield, sneeze guard front, dual
DCFSRKD-5
service 5 pan
L
OVERALL
D
H
SHIP
WEIGHT
FREIGHT
CLASS
CDN LIST
PRICE
38.47”
18”
16”
Contact CSR
Contact CSR
$3,590
53.43”
18”
16”
Contact CSR
Contact CSR
$4,200
68.17”
18”
16”
Contact CSR
Contact CSR
$4,800
82.61”
18”
16”
Contact CSR
Contact CSR
$4,800
43.09”
18”
16”
Contact CSR
Contact CSR
$3,695
59.85”
18”
16”
Contact CSR
Contact CSR
$4,310
76.35”
18”
16”
Contact CSR
Contact CSR
$4,905
92.53”
18”
16”
Contact CSR
Contact CSR
$5,510
38.47”
18”
14.75”
Contact CSR
Contact CSR
$3,490
53.43”
18”
14.75”
Contact CSR
Contact CSR
$4,165
68.17”
18”
14.75”
Contact CSR
Contact CSR
$4,800
82.61”
18”
14.75”
Contact CSR
Contact CSR
$5,450
43.09”
18”
14.75”
Contact CSR
Contact CSR
$3,550
59.85”
18”
14.75”
Contact CSR
Contact CSR
$4,210
76.35”
18”
14.75”
Contact CSR
Contact CSR
$4,855
92.53”
18”
14.75”
Contact CSR
Contact CSR
$5,510
43.09” 35.50”
15”
Contact CSR
Contact CSR
$4,905
59.85” 35.50”
15”
Contact CSR
Contact CSR
$5,840
76.35” 35.50”
15”
Contact CSR
Contact CSR
$6,795
92.53” 35.50”
15”
Contact CSR
Contact CSR
$7,765
DCFSROKS-5
Flexishield® Powdercoat
Black Powdercoat
DCFSBP-RIG-2 RIG-2 style radial food shield.................................................$665
DCFSBP-RIG-3 RIG-3 style radial food shield.................................................$985
DCFSBP-RIG-4 RIG-4 style radial food shield..............................................$1,145
DCFSBP-RIG-5 RIG-5 style radial food shield..............................................$1,405
DCFSBP-ROG-2 ROG-2 style radial food shield...............................................$665
DCFSBP-ROG-3 ROG-3 style radial food shield...............................................$985
DCFSBP-ROG-4 ROG-4 style radial food shield............................................$1,145
DCFSBP-ROG-5 ROG-5 style radial food shield............................................$1,405
DCFSBP-RIKS-2 RIKS-2 style radial food shield..............................................$620
DCFSBP-RIKS-3 RIKS-3 style radial food shield..............................................$925
DCFSBP-RIKS-4 RIKS-4 style radial food shield...........................................$1,085
DCFSBP-RIKS-5 RIKS-5 style radial food shield...........................................$1,325
DCFSBP-ROKS-2 ROKS-2 style radial food shield...........................................$620
DCFSBP-ROKS-3 ROKS-3 style radial food shield...........................................$925
DCFSBP-ROKS-4 ROKS-4 style radial food shield........................................$1,085
DCFSBP-ROKS-5 ROKS-5 style radial food shield........................................$1,325
DCFSBP-RKD-2 RKD-2 style radial food shield...............................................$810
DCFSBP-RKD-3 RKD-3 style radial food shield............................................$1,210
DCFSBP-RKD-4 RKD-4 style radial food shield............................................$1,415
DCFSBP-RKD-5 RKD-5 style radial food shield............................................$1,735
Specifications and prices subject to change without notice.
19
Tel: 905-624-1419 • 888-442-7526
Fax: 905-624-1851 • 800-361-2724
For more information, visit www.garlandcanada.ca
DELFIELD FLEXISHIELD® FOOD SHIELDS
Specifications and Prices
DELFIELD FLEXISHIELD® FOOD SHIELDS
DCFSG Series
DCFSG2 Series
Single tier glass front protector
Double tier glass front protector
DCFSHD Series
DCFSH Series
Double service, double tier display with
sneeze guard fronts
Double tier, with sneeze guard fronts
DCFSSS Series
DCFSFS Series
Slicer Shield
Single tier, flexible food shield (pivots in
three positions)
Specifications and prices subject to change without notice.
20
Tel: 905-624-1419 • 888-442-7526
Fax: 905-624-1851 • 800-361-2724
For more information, visit www.garlandcanada.ca
DCFSKS Series
Single tier, fixed food shield front, single
service
DCFSHG Series
DCFSGH Series
Double tier display bottom tier sneezeguard style, second tier full glass front
Double tier display, bottom tier full
glass front, second tier sneezeguard
style
DCFSKD Series
Single tier, fixed food shield front, dual
service
Specifications and prices subject to change without notice.
21
Tel: 905-624-1419 • 888-442-7526
Fax: 905-624-1851 • 800-361-2724
For more information, visit www.garlandcanada.ca
DELFIELD FLEXISHIELD® FOOD SHIELDS
DCFSFS2 Series
Double tier flexible foodshield (pivots in
three positions)
SE-H/SES-H SERIES - HEATED SERVING COUNTERS
SE-C/SES-C SERIES - COLD PAN SERVING COUNTERS
Shelleybasic ®
by Delfield
Shelleyglas ®
by Delfield
Shelleysteel ®
by Delfield
®
SE-H3
Shelleyspeed
SHELLEYBASIC® SERVING LINES
Shown with optional ABS
by panels
Delfield
Choose from
Laminate or Delfield’s
exclusive Delrite™
ABS panels. ABS
panels are available
in black & light blue.
Contact Delfield for a
color chart or visit
www.delfield.com.
Product Information
•SE-H and SES-H Series counters are standard
with 12" x 20" x 6" deep stainless steel heated
food wells, cord and plug, and 5" diameter
swivel, locking casters. (Note: when lights are
used over the hot wells, incandescent lights
will be used due to heat.)
• 16 gauge stainless steel tops.
•SE-H and SES-H models are standard with
Delfield's exclusive Delrite™ ABS or reversible
laminated modesty panels in front and ends
of unit.
• Black laminate backs each modesty panel.
• Units are standard with drain and gate valve.
•All electrical connections are 60 hertz, single
phase. Electrical accessories may change
listed amperage and plug
•SES-H models are 30" high overall
•SE-H models are 36" high overall
• One year parts and 90 day labor standard
warranty. Additional warranties available,
see below
Specifications and Prices
OVERALL
MODEL
DESCRIPTION
NUMBER
L
D
H
SHELLEYBASIC HEATED COUNTERS
SE-H2
2 food wells
39" 29" 36"
SE-H3
3 food wells
50" 29" 36"
SE-H4
4 food wells
64" 29" 36"
SE-H5
5 food wells
78" 29" 36"
SE-H6
6 food wells
92" 29" 36"
Add S for 30" high models. (Example SES-H)
AMP
VOLTS
WATTS
NEMA
PLUG
SHIP
WEIGHT
FREIGHT
CLASS
CDN LIST
PRICE
10.0/11.0
15.0/16.0
20.0/22.0
24.0/27.0
29.0/32.0
120/208-230
120/208-230
120/208-230
120/208-230
120/208-230
2000/2400
3000/3600
4000/4800
5000/6000
6000/7000
14-20P
14-20P
14-30P
14-50P
14-50P
215
265
320
410
500
100
100
100
100
100
$4,575
$5,260
$5,875
$6,715
$7,570
Product Information
• Black laminate backs each modesty panel.
•SE-C and SES-C Series counters are standard with
9” deep stainless steel Bloomington style cold pan
(recessed 2”, accomodates 6” deep pans), condensing unit, drain with valve, cord and plug and 5"
swivel, locking casters
SE-C3
Shown with ABS side panels, melamine
front and optional trayslide
• Electrical accessories may change listed amperage
and plug
•SES-C models are 30" high overall
•SE-C models are 36" high overall
• 16 gauge stainless steel tops.
• One year parts and 90 day labor standard
warranty. Additional warranties available,
see below.
•SE-C and SES-C are open on the operator's side,
furnished with a full bottom stainless steel shelf.
•SE-C and SES-C models are standard with Delfield's
exclusive Delrite™ ABS or reversible laminated
modesty panels in front and ends of unit.
Specifications and Prices
OVERALL
MODEL
12 X 20 X 4
NUMBER
PANS HELD
L
D
H
SHELLEYBASIC REFRIGERATED COLD PAN SERVING COUNTERS
SE-C2
2
39" 29" 36"
SE-C3
3
50" 29" 36"
SE-C4
4
64" 29" 36"
SE-C5
5
78" 29" 36"
SE-C6
6
92" 29" 36"
Add S for 30" high models. (Example SES-C)
H.P.
AMP
VOLTS
NEMA
PLUG
SHIP
WEIGHT
FREIGHT
CLASS
CDN LIST
PRICE
1/5
1/5
1/4
1/4
1/3
4.0
4.0
7.0
7.0
7.0
115
115
115
115
115
5-15P
5-15P
5-15P
5-15P
5-15P
340
415
490
565
640
100
100
100
100
100
$7,035
$7,335
$7,570
$8,300
$9,555
Shelleybasic accessories and modifications can be found on pages 27-30.
Specifications and prices subject to change without notice.
22
Tel: 905-624-1419 • 888-442-7526
Fax: 905-624-1851 • 800-361-2724
For more information, visit www.garlandcanada.ca
SE-HC/SES-HC SERIES - HOT/COLD COMBINATION SERVING COUNTERS
SE-I/SES-I SERIES - ICE COOLED SERVING COUNTERS
Shelleybasic ®
by Delfield
Product Information
•SE-HC and SES-HC Series counters are standard with
single 8" deep stainless steel food tank (which can
be switched from heated to chilled operation with
the flip of a switch), condensing unit, drain with
valve, cord and plug, and 5" swivel, locking casters
• 16 gauge stainless steel tops.
•SE-HC and SES-HC units are open on the operator's
side, furnished with a full bottom stainless steel shelf
• Electrical accessories may change listed amperage
and plug
•SES-H models are 30" high overall
by Delfield
Shelleysteel ®
by Delfield
•SE-H models are 36" high overall
• One year parts and 90 day labor standard
warranty. Additional warranties available,
see below
• Adapter bars are provided as standard
Specifications and Prices
OVERALL
MODEL
12 X 20
H.P.
AMP
NUMBER
PANS HELD
L
D
H
SHELLEYBASIC HOT/COLD SELF-CONTAINED COMBINATION COUNTERS
SE-HC2
2
39" 29" 36"
1/4
24.0
SE-HC3
3
50" 29" 36"
1/4
21.0
SE-HC4
4
64" 29" 36"
1/4
21.0
SE-HC5
5
78" 29" 36"
1/4
42.0
SE-HC6
6
92" 29" 36"
1/3
42.0
Add S for 30" high models. (Example SES-HC)
Shelleyglas ®
VOLTS
NEMA
PLUG
SHIP
WEIGHT
FREIGHT
CLASS
CDN LIST
PRICE
120
120/208-230
120/208-230
120/208-230
120/208-230
5-30P
14-30P
14-30P
14-60P
14-60P
350
425
500
575
650
100
100
100
100
100
$8,870
$9,625
$10,390
$11,370
$12,885
SE-HC3
Shelleyspeed
Shown with option SE-KS single service buffet shield ®
by Delfield
Choose from
Laminate or Delfield’s
exclusive Delrite™
ABS panels. ABS
panels are available
in black & light blue.
Contact Delfield for a
color chart or visit
www.delfield.com.
Product Information
•SE-I and SES-I Series counters are standard with
stainless steel ice pan, perforated false bottom,
drain with valve and 5" swivel, locking casters
• 16 gauge stainless steel tops.
•SE-I and SES-I are open on the operator's side,
furnished with a full bottom stainless steel shelf
•SE-I and SES-I models are standard with Delfield's
exclusive Delrite™ ABS or laminated melamine
panels in front and ends of unit
• Black laminate backs each modesty panel.
•SES-I models are 30" high overall
•SE-I models are 36" high overall
• One year parts and 90 day labor standard
warranty. Additional warranties available,
see below
SE-I3
Specifications and Prices
OVERALL
MODEL
12 X 20
NUMBER
PANS HELD
L
D
SHELLEYBASIC ICE COOLED SERVING COUNTERS
SE-I2
2
39"
29"
SE-I3
3
50"
29"
SE-I4
4
64"
29"
SE-I5
5
78"
29"
SE-I6
6
92"
29"
Add S for 30" high models. (Example SES-I)
H
SHIP
WEIGHT
FREIGHT
CLASS
CDN LIST
PRICE
36"
36"
36"
36"
36"
200
245
280
330
380
100
100
100
100
100
$3,820
$4,220
$4,905
$5,625
$6,545
Shelleybasic accessories and modifications can be found on pages 27-30.
Specifications and prices subject to change without notice.
23
Tel: 905-624-1419 • 888-442-7526
Fax: 905-624-1851 • 800-361-2724
For more information, visit www.garlandcanada.ca
SHELLEYBASIC® SERVING LINES
•SE-HC and SES-HC models are standard with
Delfield's exclusive Delrite™ ABS or laminated
modesty panels in front and ends of unit
• Black laminate backs each modesty panel.
SE-F/SES-F SERIES - FROST TOP SERVING COUNTERS
SE-U/SES-U SERIES - UTILITY COUNTERS
Shelleybasic ®
by Delfield
Shelleyglas ®
by Delfield
Shelleysteel ®
•SE-F and SES-F Series counters are standard with
stainless steel frost top, condensing units, cord and
plug and 5" diameter swivel, locking casters
• SE-F and SES-F models are standard with Delfield's
exclusive Delrite™ ABS or laminated modesty
panels in front and ends of unit
• 16 gauge stainless steel tops.
• Black laminate backs each modesty panel.
•All electrical connections are 60 hertz, single phase
•SES-F models are 30" high overall
Shown with optional fold-down tray
®
slide (SE-A)
by Delfield
•SE-F and SES-F units open on the operator's side,
furnished with a full bottom stainless steel shelf
•SE-F models are 36" high overall
Choose from
Laminate or Delfield’s
exclusive Delrite™
ABS panels. ABS
panels are available
in black & light blue.
Contact Delfield for a
color chart or visit
Specifications and Prices
by Delfield
SE-F2
Shelleyspeed
SHELLEYBASIC® SERVING LINES
Product Information
www.delfield.com.
OVERALL
MODEL
DESCRIPTION
NUMBER
L
D
SHELLEYBASIC FROST TOP SERVING COUNTERS
SE-F2
frost top
39" 29"
SE-F3
frost top
50" 29"
SE-F4
frost top
64" 29"
SE-F5
frost top
78" 29"
SE-F6
frost top
92" 29"
Add S for 30" high models. (Example SES-F)
H
• One year parts and 90 day labor standard
warranty. Additional warranties available,
see below.
AMP
H.P.
VOLTS
NEMA
PLUG
SHIP
WEIGHT
FREIGHT
CLASS
CDN LIST
PRICE
7.5
7.5
7.5
8
8
1/4
1/4
1/4
1/4
1/3
115
115
115
115
115
5-15P
5-15P
5-15P
5-15P
5-15P
370
445
530
600
670
100
100
100
100
100
$6,910
$7,745
$8,645
$9,260
$10,570
36"
36"
36"
36"
36"
Product Information
SE-U3
•SE-U and SES-U Series counters are standard with
stainless steel flat top and 5" swivel, locking casters
• Black laminate backs each modesty panel.
• 16 gauge stainless steel tops.
•SE-U models are 36" high overall
•SE-U and SES-U are open on the operator's side,
furnished with a full bottom stainless steel shelf
•SE-U and SES-U models are standard with Delfield's
exclusive Delrite™ ABS or laminated modesty panels in front and ends of unit
•SES-U models are 30" high overall
•Optional urn troughs may be added to unit to
provide a beverage counter
• One year parts and 90 day labor standard
warranty. Additional warranties available,
see below.
Specifications and Prices
MODEL
DESCRIPTION
NUMBER
L
SHELLEYBASIC UTILITY COUNTERS
SE-U2
utility, flat counter
39"
SE-U3
utility, flat counter
50"
SE-U4
utility, flat counter
64"
SE-U5
utility, flat counter
78"
SE-U6
utility, flat counter
92"
Add S for 30" high models. (Example SES-U)
OVERALL
D
H
29"
29"
29"
29"
29"
SHIP
WEIGHT
FREIGHT
CLASS
CDN LIST
PRICE
150
170
200
230
280
100
100
100
100
100
$2,490
$3,010
$3,410
$3,890
$4,710
36"
36"
36"
36"
36"
Shelleybasic accessories and modifications can be found on pages 27-30.
Specifications and prices subject to change without notice.
24
Tel: 905-624-1419 • 888-442-7526
Fax: 905-624-1851 • 800-361-2724
For more information, visit www.garlandcanada.ca
SE-CS SERIES - CASHIER STANDS
SE-TS SERIES - TRAY STANDS
Shelleybasic ®
by Delfield
Product Information
Shelleyglas ®
SE-CS Series
SE-TS Series
• Locking stainless steel cash drawer, stainless steel
shelf and 5" diameter swivel, locking casters
• Locking casters, stainless steel top and tray
platform. Silverware cutouts and cylinders are
optional
• 3” grommet hole supplied in top rear for electrical
cords
by Delfield
• 16 gauge stainless steel top, welded, ground and
polished into one integral unit
• 16 gauge stainless steel top, welded, ground and
polished into one integral unit
•SES-TS models are 30" high overall
• SE-CS models are standard with Delfield's exclusive
Delrite™ ABS or laminated modesty panels in front
and ends of unit
• One year parts and 90 day labor standard
warranty. Additional warranties available,
see below
•SES-CS models are 30" high overall
•SE-CS models are 36" high overall
Specifications and Prices
MODEL
DESCRIPTION
NUMBER
SHELLEYBASIC CASHIER STAND
SE-CS
cashier stand
L
OVERALL
D
H
SHIP
WEIGHT
FREIGHT
CLASS
CDN LIST
PRICE
29"
29"
36"
170
100
$2,910
SHELLEYBASIC TRAY STAND
SE-TS
tray stand
29"
Add S for 30" high models. (Example SES-CS)
29"
36"
140
100
$2,215
by Delfield
Shelleyspeed ®
by Delfield
SE-CS
Choose from
laminate or Delfield’s
exclusive Delrite™
ABS panels. ABS
panels are available
in black & light blue.
Contact Delfield for a
color chart or visit
www.delfield.com.
Shelleybasic accessories and modifications can be found on pages 27-30.
SE-TS
Specifications and prices subject to change without notice.
25
Tel: 905-624-1419 • 888-442-7526
Fax: 905-624-1851 • 800-361-2724
For more information, visit www.garlandcanada.ca
SHELLEYBASIC® SERVING LINES
• Black laminate backs each modesty panel.
•SE-TS models are 36" high overall
Shelleysteel ®
SE-ICE SERIES - ICE CREAM COUNTERS
SE SERIES - CORNER UNITS
Shelleybasic ®
by Delfield
Shelleyglas ®
by Delfield
Shelleysteel ®
by Delfield
®
Shelleyspeed
SE-ICE
SHELLEYBASIC® SERVING LINES
by Delfield
Choose from
Laminate or Delfield’s
exclusive Delrite™
ABS panels. ABS
panels are available
in black & light blue.
Contact Delfield for a
color chart or visit
www.delfield.com.
Product Information
•SE-ICE Series counters are standard with
condensing unit, cord and plug, 5" diameter swivel,
locking casters and drain
• SE-ICE models are standard with Delfield exclusive
Delrite™ ABS or laminated modesty panels in front
and ends of unit
• 16 gauge stainless steel top, welded, ground and
polished into one integral unit
• Black laminate backs each modesty panel.
• One year parts and 90 day labor standard
warranty. Additional warranties available,
see below
• Electrical connections are 60 hertz, single phase.
•SES-ICE models are 30" high overall
•SE-ICE models are 36" high overall
Specifications and Prices
OVERALL
MODEL
DESCRIPTION
AMPS
NUMBER
L
D
H
SHELLEYBASIC ICE CREAM COUNTERS - 0˚F STORAGE ONLY
SE-ICE1
84 CUPS
39" 29" 36"
5.3
SE-ICE2
224 CUPS
50" 29" 36"
5.3
HP
VOLTS
NEMA
PLUG
SHIP
WEIGHT
FREIGHT
CLASS
CDN LIST
PRICE
1/4
1/4
115
115
5-15P
5-15P
460
505
100
100
$7,650
$9,545
Add S for 30" high models. (Example SES-ICE1)
Capacity on 30" high models: SES-ICE1 = 84 and SES-ICE2 = 224
Shelleybasic accessories and modifications can be found on pages 27-30.
Product Information
• Black laminate backs each modesty panel.
•SE Series corner units are standard with stainless
steel flat top and 5" diameter swivel, locking
casters
• SE-S models are 30” high overall
• SE models are 36” overall
• 16 gauge stainless steel top
SE-39
• One year parts and 90 day labor standard
warranty. Additional warranties available,
see below
• SE-S models are standard with Delfield exclusive
Delrite™ ABS or laminated modesty panels in front
and ends of unit
Specifications and Prices
MODEL
NUMBER
CORNER UNITS
SE-29
SE-39
DESCRIPTION
corner units
corner units
L
29"
39"
OVERALL
D
H
29"
29"
SHIP
WEIGHT
FREIGHT
CLASS
CDN LIST
PRICE
110
160
100
100
$2,410
$2,490
36"
36"
Add S for 30" models. (Example SES-29)
Shelleybasic accessories and modifications can be found on pages 27-30.
Specifications and prices subject to change without notice.
26
Tel: 905-624-1419 • 888-442-7526
Fax: 905-624-1851 • 800-361-2724
For more information, visit www.garlandcanada.ca
SHELLEYBASIC EQUIPMENT ACCESSORIES
SEE PAGES 28-30 FOR ACCESSORIES AND MODIFICATIONS PRICING.
SE-D. 8” polyethylene fold-down cutting board
SE-E. 8" stainless steel fold-down work shelf
SE-U. 14" x 29" stainless steel end drop shelf
Lidlock
SE-SL. Sliding doors.
G. Glass front counter protector
H. Two-tier display w/glass shelves and sneeze guards
I. Three-tier display w/glass shelves and sneeze guards
KD. Double service flip-up sneeze guard shown with optional powder
coating
HD. Double service two-tier display with glass shelves
guards
and sneeze
KS. Single service flip-up sneeze guard shown with optional powder
coating
J. 12” stainless steel overshelf, 18-gauge
Specifications and prices subject to change without notice.
27
Tel: 905-624-1419 • 888-442-7526
Fax: 905-624-1851 • 800-361-2724
For more information, visit www.garlandcanada.ca
SHELLEYBASIC® SERVING LINES
SE-A. 10” stainless steel fold-down tray slide
SHELLEYBASIC ACCESSORIES AND MODIFICATIONS
SE-H/SES-H Accessories
SE-A
SE-D
SE-E
SE-F
SE-J
SE-J2
SE-LI
SE-M
SE-Q
SE-U
SE-V
SE-SL
SHELLEYBASIC® SERVING LINES
SE-C/SES-C Accessories
SE-A
SE-D
SE-E
SE-F
SE-J
SE-J2
SE-LI
SE-M
SE-Q
SE-U
SE-V
SE-SL
-3
-4
-5
-6
-2
-3
-4
-5
-6
-2
-3
-4
-5
-6
$635 $800 $955 $1,190$1,190
$635 $710 $880 $1,035$1,405
$535 $755 $895 $1,120$1,430
$235$235$235 $235$235
$390$580 $625 $860$1,095
$790$1,145$1,245 $1,740$2,190
$435$500$625 $745$870
$880 $945 $1,070 $1,245$1,690
$535$535$535 $535$535
$2,490$3,005$3,405 $3,880$4,710
$250$250$250 $250$250
$680 $910 $1,155 $1,410$1,655
10” Stainless steel fold-down tray slide
8” Polyethylene fold-down cutting board
8” Stainless steel fold-down work shelf
Alignment pin (2 per unit)
12” Stainless steel overshelf
Two tier 12” stainless steel overshelf
Light fixture (per tier)
Radiant heat lamp with on/off switch
115/115A outlet
14” x 29” Stainless steel end drop shelf
Adjustable stainless steel leg
Sliding doors
SE-HC/SES-HC Accessories
SE-A
SE-D
SE-E
SE-F
SE-J
SE-J2
SE-LI
SE-M
SE-Q
SE-U
SE-V
SE-SL
-2
$635 $800 $955 $1,190$1,190
$635 $710 $880 $1,035$1,405
$535 $755 $895 $1,120$1,430
$235$235$235 $235$235
$390$580 $625 $860$1,095
$790$1,145$1,245 $1,740$2,190
$435$500$625 $745$870
$880 $945 $1,070 $1,245$1,690
$535$535$535 $535$535
$2,490$3,005$3,405 $3,880$4,710
$250$250$250 $250$250
$680 $910 $1,155 $1,410$1,655
10” Stainless steel fold-down tray slide
8” Polyethylene fold-down cutting board
8” Stainless steel fold-down work shelf
Alignment pin (2 per unit)
12” Stainless steel overshelf
Two tier 12” stainless steel overshelf
Light fixture (per tier)
Radiant heat lamp with on/off switch
115/115A outlet
14” x 29” Stainless steel end drop shelf
Adjustable stainless steel leg
Sliding doors
$635 $800 $955 $1,190$1,190
$635 $710 $880 $1,035$1,405
$535 $755 $895 $1,120$1,430
$235$235$235 $235$235
$390$580 $625 $860$1,095
$790$1,145$1,245 $1,740$2,190
$435$500$625 $745$870
$880 $945 $1,070 $1,245$1,690
$535$535$535 $535$535
$2,490$3,005$3,405 $3,880$4,710
$250$250$250 $250$250
$680 $910 $1,155 $1,410$1,655
10” Stainless steel fold-down tray slide
8” Polyethylene fold-down cutting board
8” Stainless steel fold-down work shelf
Alignment pin (2 per unit)
12” Stainless steel overshelf
Two tier 12” stainless steel overshelf
Light fixture (per tier)
Radiant heat lamp with on/off switch
115/115A outlet
14” x 29” Stainless steel end drop shelf
Adjustable stainless steel leg
Sliding doors
Specifications and prices subject to change without notice.
28
Tel: 905-624-1419 • 888-442-7526
Fax: 905-624-1851 • 800-361-2724
For more information, visit www.garlandcanada.ca
SHELLEYBASIC ACCESSORIES AND MODIFICATIONS
SE-I/SES-I Accessories
-2 -3
-4
-5
-6
-2
-3
-4
-5
-6
-2
-3
-4
-5
-6
SE-A
10” Stainless steel fold-down tray slide
$635 $800 $955 $1,190$1,190
SE-D
8” Polyethylene fold-down cutting board
$635 $710 $880 $1,035$1,405
SE-E
8” Stainless steel fold-down work shelf
$535 $755 $895 $1,120$1,430
SE-F
Alignment pin (2 per unit)
$235$235$235 $235$235
SE-J
12” Stainless steel overshelf
$390$580 $625 $860$1,095
Two tier 12” stainless steel overshelf
$790$1,145$1,245 $1,740$2,190
SE-J2
SE-LI
Light fixture (per tier)
$435$500$625 $745$870
SE-M
Radiant heat lamp with on/off switch
$880 $945 $1,070 $1,245$1,690
SE-Q
115/115A outlet
$535$535$535 $535$535
SE-U
14” x 29” Stainless steel end drop shelf
$2,490$3,005$3,405 $3,880$4,710
Adjustable stainless steel leg
$250$250$250 $250$250
SE-V
SE-SL
Sliding doors
$680 $910 $1,155 $1,410$1,655
SE-F/SES-F Accessories
$635 $800 $955 $1,190$1,190
$635 $710 $880 $1,035$1,405
$535 $755 $895 $1,120$1,430
$235$235$235 $235$235
$390$580 $625 $860$1,095
$790$1,145$1,245 $1,740$2,190
$435$500$625 $745$870
$880 $945 $1,070 $1,245$1,690
$535$535$535 $535$535
$2,490$3,005$3,405 $3,880$4,710
$250$250$250 $250$250
$680 $910 $1,155 $1,410$1,655
10” Stainless steel fold-down tray slide
8” Polyethylene fold-down cutting board
8” Stainless steel fold-down work shelf
Alignment pin (2 per unit)
12” Stainless steel overshelf
Two tier 12” stainless steel overshelf
Light fixture (per tier)
Radiant heat lamp with on/off switch
115/115A outlet
14” x 29” Stainless steel end drop shelf
Adjustable stainless steel leg
Sliding doors
SE-U/SES-U Accessories
SE-A
SE-D
SE-E
SE-F
SE-FE
SE-J
SE-J2
SE-LI
SE-M
SE-Q
SE-U
SE-URN
SE-V
SE-SL
SHELLEYBASIC® SERVING LINES
SE-A
SE-D
SE-E
SE-F
SE-J
SE-J2
SE-LI
SE-M
SE-Q
SE-U
SE-V
SE-SL
$635 $800 $955 $1,190$1,190
$635 $710 $880 $1,035$1,405
$535 $755 $895 $1,120$1,430
$235$235$235 $235$235
$70$70$70 $70$70
$390$580 $625 $860$1,095
$790$1,145$1,245 $1,740$2,190
$435$500$625 $745$870
$880 $945 $1,070 $1,245$1,690
$535$535$535 $535$535
$2,490$3,005$3,405 $3,880$4,710
$435$765$780 $790$800
$250$250$250 $250$250
$680 $910 $1,155 $1,410$1,655
10” Stainless steel fold-down tray slide
8” Polyethylene fold-down cutting board
8” Stainless steel fold-down work shelf
Alignment pin (2 per unit)
Ferruled hole – 1” diameter
12” Stainless steel overshelf
Two tier 12” stainless steel overshelf
Light fixture (per tier)
Radiant heat lamp with on/off switch
115/115A outlet
14” x 29” Stainless steel end drop shelf
Urn Trough
Adjustable stainless steel leg
Sliding doors
Specifications and prices subject to change without notice.
29
Tel: 905-624-1419 • 888-442-7526
Fax: 905-624-1851 • 800-361-2724
For more information, visit www.garlandcanada.ca
SHELLEYBASIC ACCESSORIES AND MODIFICATIONS
SE-CS/SE-TS Accessories
SE-A
SE-D
SE-E
SE-F
SE-Q
SE-U
SE-V
SE-SL
SE-FE
SE-SW8
SHELLEYBASIC® SERVING LINES
SE-ICE Accessories
SE-A
SE-D
SE-E
SE-F
SE-Q
SE-U
SE-V
-3
-4
-5
-6
-2
-3
-4
-5
-6
-3
-4
-5
-6
$635 $800 $955 $1,190$1,190
$635 $710 $880 $1,035$1,405
$535 $755 $895 $1,120$1,430
$235$235$235 $235$235
$535$535$535 $535$535
$2,490$3,005$3,405 $3,880$4,710
$250$250$250 $250$250
10” Stainless steel fold-down tray slide
8” Polyethylene fold-down cutting board
8” Stainless steel fold-down work shelf
Alignment pin (2 per unit)
115/115A outlet
14” x 29” Stainless steel end drop shelf
Adjustable stainless steel leg
SE Accessories -2
SE-A
SE-D
SE-E
SE-F
SE-FE
E-Q
SE-U
SE-V
SE-SL
SE-PSS20
-2
$635 $800 $955 $1,190$1,190
$635 $710 $880 $1,035$1,405
$535 $755 $895 $1,120$1,430
$235$235$235 $235$235
$535$535$535 $535$535
$2,490$3,005$3,405 $3,880$4,710
$250$250$250 $250$250
$680 $910 $1,155 $1,410$1,655
$75$75$75 $75$75
$780$680$680 $680$680
10” Stainless steel fold-down tray slide
8” Polyethylene fold-down cutting board
8” Stainless steel fold-down work shelf
Alignment pin (2 per unit)
115/115A outlet
14” x 29” Stainless steel end drop shelf
Adjustable stainless steel leg
Sliding doors
Ferruled hole – 1” diameter
8 Silverware holders
$635 $800 $955 $1,190$1,190
$635 $710 $880 $1,035$1,405
$535 $755 $895 $1,120$1,430
$235$235$235 $235$235
$75$75$75 $75$75
$535$535$535 $535$535
$2,490$3,005$3,405 $3,880$4,710
$250$250$250 $250$250
$680 $910 $1,155 $1,410$1,655
$555 $700 $845 $1,070$1,190
10” Stainless steel fold-down tray slide
8” Polyethylene fold-down cutting board
8” Stainless steel fold-down work shelf
Alignment pin (2 per unit)
Ferruled hole – 1” diameter
115/115A outlet
14” x 29” Stainless steel end drop shelf
Adjustable stainless steel leg
Sliding doors
20-gauge stainless steel panels
Shelleybasic Counter Protectors
-39
-50
-64
-78
-92
G
Glass front counter protector
$1,610
$1,700
$2,180
$2,600
$2,705
H
Two-tier display w/glass shelves & sneeze guard
$2,470
$3,060
$3,880
$4,835
$4,770
HD
I
J
KD
KS
Double service two-tier display with sneeze guard
Three-tier display w/glass shelves & sneeze guard
12” stainless steel overshelf, 18-gauge
Double service flip-up sneeze guard
Single service flip-up sneeze guard
$3,195
$4,710
$635
$1,775
$1,235
$3,710
$5,245
$860
$1,860
$1,395
$4,780
$5,955
$1,000
$2,385
$1,725
$5,805
$6,980
$1,380
$2,910
$2,125
$6,160
$7,870
$1,565
$2,965
$2,055
Specifications and prices subject to change without notice.
30
Tel: 905-624-1419 • 888-442-7526
Fax: 905-624-1851 • 800-361-2724
For more information, visit www.garlandcanada.ca
Shelleybasic ®
by Delfield
SH SERIES - MOBILE HEATED SERVING COUNTERS
Shelleyglas ®
by Delfield
Shelleysteel ®
by Delfield
Product Information
• Choose from an almost unlimited selection
of laminate colors and textures to add color
to any room
• All units are standard on 5” diameter
polyurethane swivel casters for easy
cleaning
• Easy to use stainless steel interlock system is
standard on base and tray slides
• Easily modified with a complete array of
standard accessories
• Counter heights available from 28” to 36” in
2” increments
• Add eye catching decal packages or bright
canopies to create a distinctive look!
• Features new easy access panel for quick
replacement of heating element.
• One year parts and 90 day labor standard
warranty. Additional warranties available,
see below
Shelleyspeed ®
by Delfield
SH-3-NU
Shown with the following options:
G—glass front counter protector
A—12” stainless steel V
fold-down tray slide
SH-4-NU
Specifications and Prices
MODEL OVERALL
NUMBER DESCRIPTION
L
D
H
AMP
VOLTS
WATTS
NEMA
PLUG
SHIP
WEIGHT
FREIGHT CDN LIST
CLASS
PRICE
Shown with the following options:
KS—glass front counter protector
A—12” stainless steel V
fold-down tray slide
SHELLEYSTEEL HEATED SERVING COUNTERS
With heated understorage
SH-2
2 food wells
SH-3
3 food wells
SH-4
4 food wells
SH-5
5 food wells
SH-6
6 food wells
36”
50”
60”
74”
96”
30”
30”
30”
30”
30”
36”
36”
36”
36”
36”
15.0
20.0
26.0
31.0
37.0
120/208-230
120/208-230
120/208-230
120/208-230
120/208-230
2900/3300
3900/4500
4900/5700
5900/6900
6900/7900
14-20P
14-30P
14-50P
14-50P
14-50P
380
460
550
660
720
100 $8,670
100 $9,915
100 $10,735
100 $11,825
100 $13,035
Without understorage
SH-2-NU
2 food wells
SH-3-NU
3 food wells
SH-4-NU
4 food wells
SH-5-NU
5 food wells
SH-6-NU
6 food wells
36”
50”
60”
74”
96”
30”
30”
30”
30”
30”
36”
36”
36”
36”
36”
11.0
16.0
22.0
28.0
33.0
120/208-230
120/208-230
120/208-230
120/208-230
120/208-230
2000/2400
3000/3600
4000/4800
5000/6000
6000/7000
14-20P
14-20P
14-30P
14-50P
14-50P
225
275
330
420
510
100
100
100
100
100
$5,625
$6,480
$7,245
$8,320
$9,505
Shelleysteel accessories and modifications can be found on pages 49-57.
Specifications and prices subject to change without notice.
31
Tel: 905-624-1419 • 888-442-7526
Fax: 905-624-1851 • 800-361-2724
For more information, visit www.garlandcanada.ca
SHELLEYSTEEL® SERVING LINES
• 14-gauge stainless steel top
• 18-gauge stainless steel exterior body
• 14-gauge galvanized bottom
• SH units have heated under storage compartment, provided with removable pan
slides. SH-NU units have enclosed bases
with no under storage
• A maximum 10’ long cord and plug are supplied standard
• Electrical connections are 60 hertz, single
phase. Three-phase design is available for
an additional charge. Electrical accessories
may change listed amperage and plug
• Top has two to six electrically heated,
recessed die stamped stainless steel hot
food warmers. Each warmer accommodates
one 12” x 20” x 6” pan
• All exterior panels reinforced with overlapping corners, welded in place
• All body cutouts reinforced with 14-gauge
channel supports
Shelleybasic ®
by Delfield
SCSC-B SERIES - MOBILE REFRIGERATED COLD PAN SERVING COUNTERS
®
Shelleyglas
SCSC-EF
SERIES - LIQUITEC REFRIGERATED COLD PAN
by Delfield
Shelleysteel ®
by Delfield
Shelleyspeed
by Delfield
SCSC-74-B
SHELLEYSTEEL® SERVING LINES
pans by others
SCSC-60-EF
Shown with optional laminate, canopy,
custom counter protector and extended
base
Patented LiquiTec® Technology brings
food and pans completely flush!
Product Information
®
• 14-gauge stainless steel top
• 18-gauge stainless steel exterior body
• 14-gauge galvanized bottom
• On/off switch mounted to exterior of unit
• A maximum 10’ long cord and plug are supplied
standard
• All exterior panels reinforced with overlapping
corners, welded in place
• All body cutouts reinforced with 14-gauge
channel supports
• Choose from an almost unlimited selection of
laminate colors and textures to add color to any
room
• Electrical connections are 60 hertz, single
phase. Electrical accessories may change listed
amperage and plug
• All units are standard on 5” polyurethane swivel
casters for easy cleaning
• Easy to use stainless steel interlock system is
standard on base and tray slides
• Easily modified with a complete array of standard
accessories
• Add eye catching decal packages or bright
canopies to create a distinctive look!
• Counter heights available from 28” to 36” in 2”
increments
• Environmentally friendly HFC-404A refrigerant
• One year parts and 90 day labor standard warranty.
Additional warranties available, see below
SCSC-B
• SCSC-B Series counters are standard with 7”
deep refrigerated cold pan. Cold pans are fully
insulated with foamed in place polyurethane
insulation
• Pans recessed 2” from top edge of counter
• SCSC-B models are standard with enclosed base
• Cold pans are standard with drain with valve
• Adapter bars will be furnished at no additional
charge if requested on original order only. Pans
are supplied by others
• Optional open shelf and dry door inserts can be
added to all models and lengths. Refrigerated
insert can be added to 60”, 74”, or 96” long units
SCSC-EF
• The LiquiTec cold pan has two – six die stamped
openings with depressed edges, each well,
holding one 12” x 20” pan (pans supplied by
others)
• Eutectic fluid completely surrounds each cold
pan providing the maximum-- five sided cooling
• All SCSC-EF models meet NSF 7 with pans
completely flush with counter
• Cold pan is fully insulated with foamed in place
polyurethane insulation
Specifications and Prices
MODEL NUMBER COLD PAN DIMENSIONS
SIZE
L
D
H
AMP H.P.
VOLTS
NEMA
PLUG
SHIP
WEIGHT
5-15P
5-15P
5-15P
5-15P
5-15P
350
425
500
575
650
100
100
100
110
110
$9,495
$9,890
$10,240
$12,130
$12,920
SHELLEYSTEEL LIQUITEC COLD PAN SERVING COUNTER WITH PATENTED LiquiTec® TECHNOLOGY
SCSC-36-EF
2 pan cap
36" 30" 36"
7.0
1/4
115
5-15P
SCSC-50-EF
3 pan cap
50" 30" 36"
7.0
1/4
115
5-15P
SCSC-60-EF
4 pan cap
60" 30" 36"
7.0
1/4
115
5-15P
SCSC-74-EF
5 pan cap
74" 30" 36"
7.0
1/4
115
5-15P
6 pan cap
96" 30" 36"
7.0
1/4
115
5-15P
SCSC-96-EF
380
455
530
615
680
100
100
100
100
100
$10,865
$11,315
$11,695
$12,835
$14,730
SHELLEYSTEEL REFRIGERATED COLD PAN SERVING COUNTERS
SCSC-36-B
26” X 21.62”
36” 30” 36”
7.0
SCSC-50-B
39” X 21.62”
50” 30” 36”
7.0
SCSC-60-B
52” X 21.62”
60” 30” 36”
7.0
SCSC-74-B
65” X 21.62”
74” 30” 36”
7.0
78” X 21.62”
96” 30” 36”
7.0
SCSC-96-B
1/4
1/4
1/4
1/4
1/4
115
115
115
115
115
FREIGHT CDN LIST
CLASS
PRICE
Shelleysteel accessories and modifications can be found on pages 49-57.
Specifications and prices subject to change without notice.
32
Tel: 905-624-1419 • 888-442-7526
Fax: 905-624-1851 • 800-361-2724
For more information, visit www.garlandcanada.ca
Shelleybasic ®
by Delfield
SHCR-B SERIES - HOT/COLD COMBINATION COUNTERS
SHC SERIES- ICE COOLED HOT/COLD COMBINATION Shelleyglas
COUNTERS
by Delfield
®
Shelleysteel ®
by Delfield
Product Information
• Choose from an almost unlimited selection of
laminate colors and textures to add color to any
room
• All units are standard on 5” diameter
polyurethane swivel casters for easy cleaning
• Easy to use stainless steel interlock system is
standard on base and tray slides
• Easily modified with a complete array of standard
accessories
• Counter heights available from 28” to 36” in 2”
increments
• Add eye catching decal packages or bright
canopies to create a distinctive look!
• One year parts and 90 day labor standard
warranty. Additional warranties available, see
below
SHCR-B ONLY
• The refrigerated cold pan is 7” deep constructed
of stainless steel. Cold pan is equipped with a 1”
drain with valve
• Meets NSF requirements with 3” recessed pans
• Environmentally friendly HFC-404A refrigerant
SHC ONLY
• Insulated ice pan is 7” deep and constructed of
22-gauge stainless steel. Perforated false bottom,
and drain with valve is standard
Shelleyspeed ®
by Delfield
SH2CR-60-B
Shown with the following options:
A. 12” stainless steel V
fold down
E. 10” wide stainless steel
folddown work shelf
KS. single service flip up sneeze guard
U. End shelf
Specifications and Prices
MODEL NUMBER HOT
WELLS
COLD PANDIMENSIONS
SIZE
L
D H AMP H.P.
VOLTS
WATTS
SHELLEYSTEEL SELF-CONTAINED HOT AND COLD COMBINATION COUNTERS
1
26” X 21.62” 50” 30” 36” 16.0 1/4
120
1
39” X 21.62” 60” 30” 36” 16.0 1/4
120
2
26” X 21.62” 62” 30” 36” 18.0 1/4 120/208-230
1
52” X 21.62” 74” 30” 36” 16.0 1/4
120
2
39” X 21.62” 74” 30” 36” 18.0 1/4 120/208-230
1
65” X 21.62” 96” 30” 36” 16.0 1/4
120
2
52” X 21.62” 96” 30” 36” 18.0 1/4 120/208-230
3
39” X 21.62” 96” 30” 36” 23.0 1/4 120/208-230
4
26” X 21.62” 96” 30” 36” 29.0 1/4 120/208-230
SHCR-50-B
SHCR-60-B
SH2CR-62-B
SHCR-74-B
SH2CR-74-B
SHCR-96-B
SH2CR-96-B
SH3CR-96-B
SH4CR-96-B
1000
1000
2000/2400
1000
2000/2400
1000
2000/2400
3000/3600
4000/4800
NEMA SHIP FREIGHT CDN LIST
PLUG WEIGHT CLASS PRICE
5-20P
5-20P
14-30P
5-20P
14-30P
5-20P
14-30P
14-30P
14-50P
475
575
575
688
690
730
740
750
760
100
100
100
100
100
100
100
100
100
$10,550
$11,150
$11,885
$12,635
$13,390
$15,215
$16,150
$16,950
$18,050
Shelleysteel accessories and modifications can be found on pages 49-57.
For LiquiTec® option, see accessory pages.
Specifications and Prices
MODEL NUMBER HOT
WELLS
COLD PAN OVERALL
SIZE
L
D H AMP H.P.
VOLTS
SHELLEYSTEEL ICE-COOLED HOT AND COLD COMBINATION COUNTERS
1
26” X 21.62”
50” 30” 36” 9.0 —
1
26” X 21.62”
60” 30” 36” 9.0 —
2
26” X 21.62”
62” 30” 36” 11.0 —
1
52” X 21.62”
74” 30” 36” 9.0 —
2
26” X 21.62”
74” 30” 36” 11.0 —
3
26” X 21.62”
74” 30” 36” 16.0 —
1
65” X 21.62”
96” 30” 36” 9.0 —
2
52” X 21.62”
96” 30” 36” 11.0 —
3
39” X 21.62”
96” 30” 36” 16.0 —
4
26” X 21.62”
96” 30” 36” 22.0 —
SHC-50-NU
SHC-60-NU
SH2C-62-NU
SHC-74-NU
SH2C-74-NU
SH3C-74-NU
SHC-96-NU
SH2C-96-NU
SH3C-96-NU
SH4C-96-NU
120
120
120/208-230
120
120/208-230
120/208-230
120
120/208-230
120/208-230
120/208-230
MAX
WATTS
1000
1000
2000/2400
1000
2000/2400
3000/3600
1000
2000/2400
3000/3600
4000/4800
NEMA SHIP FREIGHT CDN LIST
PLUG WEIGHT CLASS PRICE
5-15P
5-15P
14-20P
5-15P
14-20P
14-20P
5-15P
14-20P
14-20P
14-30P
300
350
350
400
410
420
425
430
450
460
100
100
100
100
100
100
100
100
100
100
$7,595
$8,340
$8,115
$9,750
$10,660
$11,825
$12,385
$13,360
$14,270
$15,430
Shelleysteel accessories and modifications can be found on pages 49-57.
Specifications and prices subject to change without notice.
33
Tel: 905-624-1419 • 888-442-7526
Fax: 905-624-1851 • 800-361-2724
For more information, visit www.garlandcanada.ca
SHELLEYSTEEL® SERVING LINES
• Save space by having both hot and cold in one
convenient location
• 14-gauge stainless steel top
• 18-gauge stainless steel exterior body
• 14-gauge galvanized bottom
• All SHCR-B models are standard with enclosed
bases
• Top has one to four electrically heated, recessed
die-stamped stainless steel hot food warmers.
Each warmer accommodates a 12” x 20” x 6” pan
(pans supplied by others)
• Note: When lights with heat lamps are used over
hot wells, incandescent light fixtures will be used
due to heat.
• A maximum 10’ long cord and plug are supplied
standard
• Electrical connections are 60 hertz, single phase.
Three-phase design is available for an additional
charge. Electrical accessories may change listed
amperage and plug
• All exterior panels reinforced with overlapping
corners, welded in place
• All body cutouts reinforced with 14-gauge
channel supports
Shelleybasic ®
by Delfield
SCFT-NU SERIES - FROST TOP SERVING COUNTERS
Shelleyglas ®
by Delfield
Shelleysteel ®
by Delfield
Shelleyspeed ®
by Delfield
SHELLEYSTEEL® SERVING LINES
SCFT-74-NU
Add eye catching decal packages or bright
canopies to create a distinctive look!
Product Information
• 14-gauge stainless steel top
• 18-gauge stainless steel exterior body
• 14-gauge galvanized bottom
• Frost top is 18-gauge stainless steel, one piece
construction; perimeter drain with valve located
at bottom of unit standard
• 18” x 26” sheet pan can rest on frost top
• On/off switch located on exterior of unit
• SCFT units are standard with enclosed base
• Meets NSF requirements
• Environmentally friendly R404A refrigerant
• A maximum 10’ long cord and plug are supplied
standard
• Electrical connections are 60 hertz, single
phase. Electrical accessories may change listed
amperage and plug
• All exterior panels reinforced with overlapping
corners, welded in place
• All body cutouts reinforced with 14-gauge
channel supports
• All units are standard on 5” diameter
polyurethane swivel casters for easy cleaning
• Easy to use stainless steel interlock system is
standard on base and tray slides
• Easily modified with a complete array of standard
accessories
• Counter heights available from 28” to 36” in 2”
increments
• Choose from an almost unlimited selection of
laminate colors and textures to add color to any
room
• Add eye catching decal packages or bright
canopies to create a distinctive look!
• Environmentally friendly HFC-404A refrigerant
• One year parts and 90 day labor standard warranty.
Additional warranties available, see below
Specifications and Prices
MODEL NUMBER OVERALL
DESCRIPTION
L
D
H
AMP H.P.
VOLTS
NEMA
PLUG
SHIP
WEIGHT
FREIGHT
CLASS
CDN LIST
PRICE
100
100
100
110
110
$9,335
$10,460
$11,670
$12,490
$14,280
SHELLEYSTEEL FROST TOP SERVING COUNTERS
Without understorage
SCFT-36-NU
frost top
SCFT-50-NU
frost top
SCFT-60-NU
frost top
SCFT-74-NU
frost top
SCFT-96-NU
frost top
36”30”36”
50”30”36”
60”30”36”
74”30”36”
96”30”36”
7.0
7.0
7.0
8.0
8.0
1/4
1/4
1/4
1/3
1/3
115
115
115
115
115
5-15P
5-15P
5-15P
5-15P
5-15P
380
455
540
610
680
Shelleysteel accessories and modifications can be found on pages 49-57.
Specifications and prices subject to change without notice.
34
Tel: 905-624-1419 • 888-442-7526
Fax: 905-624-1851 • 800-361-2724
For more information, visit www.garlandcanada.ca
Shelleybasic ®
by Delfield
SCI SERIES - ICE PAN SERVING COUNTERS
Shelleyglas ®
by Delfield
Shelleysteel ®
by Delfield
Product Information
• All units are standard on 5” diameter
polyurethane swivel casters for easy cleaning
• Easy to use stainless steel interlock system is
standard on base and tray slides
• Easily modified with a complete array of standard
accessories
• Choose from an almost unlimited selection of
laminate colors and textures to add color to any
room
•Add eye catching decal packages or bright canopies
to create a distinctive look!
• One year parts and 90 day labor standard warranty.
Additional warranties available, see below
Shelleyspeed ®
by Delfield
SCI-60-NU
Shown with the following options:
C. 10” wide three-bar fold down tray
slide
H. Two tier display with glass shelves
and sneeze guards
Specifications and Prices
MODEL NUMBER ICE PAN SIZE
L
OVERALL
D
H
SHIP
WEIGHT
FREIGHT
CLASS
CDN LIST
PRICE
SHELLEYSTEEL ICE PAN SERVING COUNTERS
With dry understorage
SCI-36
SCI-50
SCI-60
SCI-74
SCI-96
26” x 21.62”
39” x 21.62”
52” x 21.62”
65” x 21.62”
78” x 21.62”
36”
50”
60”
74”
96”
30”
30”
30”
30”
30”
36”
36”
36”
36”
36”
240
285
320
360
400
110
110
110
110
110
$7,500
$7,985
$8,900
$9,810
$11,385
Without understorage
SCI-36-NU
SCI-50-NU
SCI-60-NU
SCI-74-NU
SCI-96-NU
26” x 21.62”
39” x 21.62”
52” x 21.62”
65” x 21.62”
78” x 21.62”
36”
50”
60”
74”
96”
30”
30”
30”
30”
30”
36”
36”
36”
36”
36”
200
245
280
330
380
110
110
110
110
110
$5,170
$5,710
$6,630
$7,520
$8,840
Shelleysteel accessories and modifications can be found on pages 49-57.
Specifications and prices subject to change without notice.
35
Tel: 905-624-1419 • 888-442-7526
Fax: 905-624-1851 • 800-361-2724
For more information, visit www.garlandcanada.ca
SHELLEYSTEEL® SERVING LINES
• 14-gauge stainless steel top
• 18-gauge stainless steel exterior body
• 14-gauge galvanized bottom
• Best for use where electricity is not available
• Insulated ice pan is 7” deep and is standard with
the following: perforated false bottom, drain with
valve and casters
• SCI units are standard with dry hinged door
storage compartment, while SCI-NU units have
enclosed bases with no under storage
• Meets NSF requirements
• All exterior panels reinforced with overlapping
corners, welded in place
• All body cutouts reinforced with 14-gauge
channel supports
Shelleybasic ®
by Delfield
SCU SERIES - BEVERAGE COUNTERS
Shelleyglas ®
by Delfield
Shelleysteel ®
by Delfield
Shelleyspeed
by Delfield
SCU-50-NU
SHELLEYSTEEL® SERVING LINES
Shown with optional legs
Product Information
®
• 14-gauge stainless steel top
• 18-gauge stainless steel exterior body
• 14-gauge galvanized bottom
• Reinforced top includes a stainless steel drain
trough with removable stainless steel anti-splash
drip gate. (Trough is standard on customer side,
available on operator side if specified.)
• Drain trough has a 1” drain plumbed to a drain
valve located at the bottom of the unit
• SCU models are standard with dry hinged door
storage compartment
• Meets NSF requirements
• All exterior panels reinforced with overlapping
corners, welded in place
• All body cutouts reinforced with 14-gauge
channel supports
• All units are standard on 5” diameter
polyurethane swivel casters for easy cleaning
• Easy to use stainless steel interlock system is
standard on base and tray slides
• Easily modified with a complete array of standard
accessories
• Choose from an almost unlimited selection of
laminate colors and textures to add color to any
room
• Add eye catching decal packages or bright
canopies to create a distinctive look!
• One year parts and 90 day labor standard warranty.
Additional warranties available, see below
Specifications and Prices
MODEL NUMBER DESCRIPTION
L
OVERALL
D
H
SHIP
WEIGHT
FREIGHT
CLASS
CDN LIST
PRICE
SHELLEYSTEEL BEVERAGE COUNTERS
With dry understorage
SCU-36
SCU-50
SCU-60
SCU-74
SCU-96
24” urn trough
36” urn trough
48” urn trough
60” urn trough
82” urn trough
36”
50”
60”
74”
96”
30”
30”
30”
30”
30”
36”
36”
36”
36”
36”
200
230
270
300
340
125
125
125
125
125
$6,235
$7,000
$7,925
$8,805
$10,265
Without understorage
SCU-36-NU
SCU-50-NU
SCU-60-NU
SCU-74-NU
SCU-96-NU
24” urn trough
36” urn trough
48” urn trough
60” urn trough
82” urn trough
36”
50”
60”
74”
96”
30”
30”
30”
30”
30”
36”
36”
36”
36”
36”
170
190
230
260
300
125
125
125
125
125
$4,285
$4,710
$5,530
$6,345
$7,795
Shelleysteel accessories and modifications can be found on pages 49-57.
Specifications and prices subject to change without notice.
36
Tel: 905-624-1419 • 888-442-7526
Fax: 905-624-1851 • 800-361-2724
For more information, visit www.garlandcanada.ca
Shelleybasic ®
by Delfield
SC SERIES - ALL PURPOSE COUNTERS
Shelleyglas ®
by Delfield
Shelleysteel ®
by Delfield
Product Information
• Easy to use stainless steel interlock system is
standard on base and tray slides
• Easily modified with a complete array of standard
accessories
• Choose from an almost unlimited selection of
laminate colors and textures to add color to any
room
• Add eye catching decal packages or bright
canopies to create a distinctive look!
• One year parts and 90 day labor standard warranty.
Additional warranties available, see below
Shelleyspeed ®
by Delfield
SC-50-NU
Shown with the following options:
A. 12” stainless steel V fold
down tray slide
G. Glass front counter protector
P. Open understorage with shelf
Specifications and Prices
MODEL NUMBER DESCRIPTION
L
D
H
SHIP
WEIGHT
FREIGHT
CLASS
CDN LIST
PRICE
SHELLEYSTEEL ALL PURPOSE COUNTERS
With dry understorage
SC-28
SC-36
SC-50
SC-60
SC-74
SC-96
dry storage
dry storage
dry storage
dry storage
dry storage
dry storage
28”
36”
50”
60”
74”
96”
30”
30”
30”
30”
30”
30”
36”
36”
36”
36”
36”
36”
165
185
205
240
270
310
125
125
125
125
125
125
$4,785
$5,545
$6,135
$6,930
$7,595
$8,900
Without understorage
SC-28-NU
SC-36-NU
SC-50-NU
SC-60-NU
SC-74-NU
SC-96-NU
enclosed base
enclosed base
enclosed base
enclosed base
enclosed base
enclosed base
28”
36”
50”
60”
74”
96”
30”
30”
30”
30”
30”
30”
36”
36”
36”
36”
36”
36”
120
160
180
210
240
280
125
125
125
125
125
125
$3,125
$3,385
$4,070
$4,610
$5,270
$6,385
SC-60-NU
Shelleysteel accessories and modifications can be found on pages 49-57.
Specifications and prices subject to change without notice.
37
Tel: 905-624-1419 • 888-442-7526
Fax: 905-624-1851 • 800-361-2724
For more information, visit www.garlandcanada.ca
SHELLEYSTEEL® SERVING LINES
• 14-gauge stainless steel top
• 18-gauge stainless steel exterior body
• 14-gauge galvanized bottom
• Flat 14-gauge stainless steel top
• SC models are standard with dry hinged door
storage compartment
• Meets NSF requirements
• All exterior panels reinforced with overlapping
corners, welded in place
• All body cutouts reinforced with 14-gauge
channel supports
• All units are standard on 5” diameter
polyurethane swivel casters for easy cleaning
SCM
SERIES - SHELLEYSTEEL MILK COUNTERS
Shelleybasic
by Delfield SHELLEYSTEEL ICE CREAM COUNTERS
SCF SERIESSCFM
SERIES - SHELLEYSTEEL MILK AND ICE CREAM COUNTERS
Shelleyglas
®
®
by Delfield
Shelleysteel ®
by Delfield
Product Information
Shelleyspeed
by Delfield
SHELLEYSTEEL® SERVING LINES
SCM-50
®
•
•
•
•
•
•
•
•
•
•
•
•
•
18-gauge stainless steel exterior body
14-gauge galvanized bottom
14-gauge stainless steel top
Top has one; two, three or four die stamped
openings and is provided with hinged stainless
steel removable lids
Watertight inner liner has radius corners for easy
cleaning
Equipped with a drain plumbed to a drain valve
Refrigerated compartment is equipped with
automatic self-leveling, field adjustable elevators.
Divider trays are supplied
60 hertz, single phase electrical standard
10’ cord and plug standard
Meets NSF requirements
All exterior panels reinforced with overlapping
corners, welded in place
All body cutouts reinforced with 14-gauge
channel supports
All units are standard on 5” diameter
polyurethane swivel casters for easy cleaning
• Easy to use stainless steel interlock system is
standard on base and tray slides
• Easily modified with a complete array of standard
accessories
• Choose from an almost unlimited selection of
laminate colors and textures to add color to any
room
• One year parts and 90 day labor standard warranty.
Additional warranties available, see below
SCM SERIES ONLY
• Milk capacities are based on half pint, 2.75” x
2.75” gable top cartons
• HFC-134A refrigerant is standard
SCF SERIES ONLY
• Ice cream capacities are based on 3” diameter,
three ounce cups
• HFC-404A refrigerant is standard
SCFM SERIES ONLY
• Milk capacities are based on half pint, 2.75” x
2.75” gable top cartons
• HFC-134A refrigerant is standard
Specifications and Prices
MODEL NUMBER LID(S)
CAPACITY
L
D H
AMP H.P.
VOLTS
NEMA
PLUG
SHIP
WEIGHT
FREIGHT
CLASS
CDN LIST
PRICE
SHELLEYSTEEL MILK COUNTERS—40°F STORAGE ONLY
SCM-36
1
126 cartons
36” 30” 36”
SCM-50
2
252 cartons
50” 30” 36”
SCM-60
3
378 cartons
60” 30” 36”
4
504 cartons
74” 30” 36”
SCM-74
5.0
5.0
5.0
5.0
1/4
1/4
1/4
1/4
115
115
115
115
5-15P
5-15P
5-15P
5-15P
400
450
500
550
92.5
92.5
92.5
92.5
$8,730
$12,160
$14,205
$16,565
SHELLEYSTEEL ICE CREAM COUNTERS—0°F STORAGE ONLY
SCF-36 1
210 cups
36” 30” 36”
2
420 cups
50” 30” 36”
SCF-50 SCF-60 3
630 cups
60” 30” 36”
SCF-74 4
840 cups
74” 30” 36”
7.1
7.1
8.0
8.0
1/4
1/4
1/3
1/3
115
115
115
115
5-15P
5-15P
5-15P
5-15P
475
525
575
625
92.5
92.5
92.5
92.5
$11,695
$14,055
$16,095
$18,255
115
5-15P
500
92.5
$14,720
115
5-15P
590
92.5
$19,145
SHELLEYSTEEL MILK AND ICE CREAM COUNTERS—40°F AND 0°F STORAGE ONLY
SCFM-50 2
126 cartons
50” 30” 36”
7.1
1/4
or 210 cups
SCFM-74
4
252 cartons
74” 30” 36”
8.0
1/3
or 420 cups
Shelleysteel accessories and modifications can be found on pages 49-57.
Specifications and prices subject to change without notice.
38
Tel: 905-624-1419 • 888-442-7526
Fax: 905-624-1851 • 800-361-2724
For more information, visit www.garlandcanada.ca
SCS SERIES - CASHIER’S COUNTER
SCTRI SERIES - TRIANGLE CORNER COUNTER
Shelleybasic
by Delfield
SRB SERIES - CARVING COUNTER
SCTS SERIES - TRAY STANDS
Shelleyglas
SWT SERIES - WORK
TABLES
by Delfield
®
®
Shelleysteel ®
Product Information
•
•
•
•
•
•
•
•
•
•
SCS SERIES ONLY
• A 3” grommet hole is located at the rear of the
top to allow cord access for cash registers
• Stainless steel locking cash drawer standard
• Stainless steel under shelf can serve as foot rest
or storage
SRB SERIES ONLY
• SRB counters are standard with stainless steel
removable carving tray, heated au jus well, nonadjustable infrared heat lamp, dry under storage
compartment with hinged doors
• 10’ cord and plug are standard
• 50 Hertz, single phase electrical standard
• SRB models are standard with dry hinged door
storage compartment with shelf
• Electrical accessories may change listed
amperage and plug
SCTS SERIES ONLY
• Silverware cutouts and cylinders are optional
Shelleyspeed ®
by Delfield
SCS-30
Shown with the following options:
A. 12” stainless steel V fold down
tray slide
Q. outlet with breaker
Specifications and Prices
MODEL NUMBER DESCRIPTION
L
D
H
AMP
VOLTS
NEMA
PLUG
SHIP
WEIGHT
FREIGHT
CLASS
CDN LIST
PRICE
SHELLEYSTEEL CASHIER’S COUNTERS
SCS-30
cashier’s counter
SCS-36
cashier’s counter
SCS-50
cashier’s counter
30”
30”
30”
30”
36”
50”
36”
36”
36”
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
180
210
270
100
100
100
$3,955
$4,240
$4,570
SHELLEYSTEEL TRIANGLE CORNER UNIT
SC-TRI
corner unit, enclosed base
SC-TRIOS
corner unit, open shelf
40”
40”
30”
30”
36”
36”
N/A
N/A
N/A
N/A
N/A
N/A
160
160
100
100
$4,215
$4,610
SHELLEYSTEEL CARVING COUNTERS
SRB
carving counter
28”
30”
36”
5.0
120 5-15P
180
100
$8,660
SHELLEYSTEEL TRAY STANDS
SCTS-28
tray stand
SCTS-36
tray stand
30”
30”
28”
36”
36”
36”
N/A
N/A
N/A
N/A
N/A
N/A
150
192
125
125
$3,005
$3,140
SHELLEYSTEEL WORK TABLES
SWT-36
work table
SWT-48
work table
SWT-60
work table
SWT-74
work table
36”
48”
60”
74”
30”
30”
30”
30”
36”
36”
36”
36”
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
100
158
200
230
125
125
125
125
$3,020
$3,140
$3,270
$3,405
SCTS-28
Shown with the following option:
SW. silverware cutouts with stainless
steel silverware holder
Shelleysteel accessories and modifications can be found on pages 49-57.
Specifications and prices subject to change without notice.
39
Tel: 905-624-1419 • 888-442-7526
Fax: 905-624-1851 • 800-361-2724
For more information, visit www.garlandcanada.ca
SHELLEYSTEEL® SERVING LINES
•
by Delfield
18-gauge stainless steel exterior body
14-gauge galvanized bottom
14-gauge stainless steel top
Meets NSF requirements
All exterior panels reinforced with overlapping
corners, welded in place
All body cutouts reinforced with 14-gauge
channel supports
All units are standard on 5” diameter
polyurethane swivel casters for easy cleaning
Easy to use stainless steel interlock system is
standard on base and tray slides
Easily modified with a complete array of standard
accessories
Choose from an almost unlimited selection of
laminate colors and textures to add color to any
room
One year parts and 90 day labor standard warranty.
Additional warranties available, see below
KH SERIES - MOBILE HEATED SERVING COUNTERS
Shelleybasic ®
by Delfield
Shelleyglas ®
by Delfield
Shelleysteel ®
by Delfield
Shelleyspeed ®
by Delfield
KH-4-NU
SHELLEYGLAS® SERVING LINES
Shown with the following option:
G. glass front counter protector
P. open shelf understorage
KH-5-NU
Shown with the following options:
KS. single service sneeze guard
A. 12” stainless steel V fold-down tray slide
V. 6" Adjustable bullet feet
Product Information
• One piece, molded fiberglass pylon (base), fully
rounded corners, permanent color
• All corners and center sides reinforced with
galvanized bracing, laminated into the fiberglass
• Full NSF and UL Certification
• Fire Code rating on fiberglass, laminate, canopy
materials
• 14-gauge tops
• All units are standard on 5” diameter
polyurethane swivel casters for easy cleaning
• Caster mounting plates laminated into base
• Easy to use stainless steel interlock system is
standard on base and tray slides
• Enclosed bases for vermin control
• A maximum 10’ long cord and plug are supplied
standard
• KH units have heated under storage
compartment, provided with removable pan
slides. KH-NU units have enclosed bases with no
under storage
• Electrical connections are 60 hertz, single phase.
Three-phase design is available for an additional
charge. Electrical accessories may change listed
amperage and plug
• Top has two to six electrically heated, recessed
die stamped stainless steel hot food warmers.
Each warmer accommodates one 12” x 20” x 6”
pan
• All body cutouts reinforced with 14-gauge
channel supports
• Easily modified with a complete array of standard
accessories
• Counter heights available from 28” to 36” in 2”
increments
• Choose from 25 standard fiberglass colors,
custom colors are also available
• Add eye catching decal packages or bright
canopies to create a distinctive look!
• Features new easy access panel for quick replacement of heating element.
• Contact Delfield for a Shelleyglas color chart or
visit www.delfield.com
• One year parts and 90 day labor standard
warranty. Additional warranties available,
see below
Specifications and Prices
Add eye catching decal packages or bright
canopies to create a distinctive look!
MODEL OVERALL
NUMBER DESCRIPTION
L
D H
AMP
VOLTS
SHELLEYGLAS HEATED SERVING COUNTERS
MAX
WATTS
NEMA
PLUG
SHIP
FREIGHT CDN LIST
WEIGHT CLASS
PRICE
With heated understorage
KH-2
2 food wells
KH-3
3 food wells
KH-4
4 food wells
KH-5
5 food wells
KH-6
6 food wells
36”
50”
60”
74”
96”
30”
30”
30”
30”
30”
36”
36”
36”
36”
36”
15.0
20.0
26.0
31.0
37.0
120/208-230
120/208-230
120/208-230
120/208-230
120/208-230
2900/3300
3900/4500
4900/5700
5900/6900
6900/7900
14-20P
14-30P
14-50P
14-50P
14-50P
380
460
550
660
720
100
100
100
100
100
$8,900
$10,000
$10,900
$11,955
$13,625
Without understorage
KH-2-NU
2 food wells
KH-3-NU
3 food wells
KH-4-NU
4 food wells
KH-5-NU
5 food wells
KH-6-NU
6 food wells
36”
50”
60”
74”
96”
30”
30”
30”
30”
30”
36”
36”
36”
36”
36”
11.0
16.0
22.0
28.0
33.0
120/208-230
120/208-230
120/208-230
120/208-230
120/208-230
2000/2400
3000/3600
4000/4800
5000/6000
6000/7000
14-20P
14-20P
14-30P
14-50P
14-50P
225
275
330
420
510
100
100
100
100
100
$6,125
$6,880
$7,760
$8,790
$10,460
Shelleyglas accessories and modifications can be found on pages 49-57.
Specifications and prices subject to change without notice.
40
Tel: 905-624-1419 • 888-442-7526
Fax: 905-624-1851 • 800-361-2724
For more information, visit www.garlandcanada.ca
KCSC-B SERIES - MOBILE REFRIGERATED COLD PAN SERVING COUNTERS
®
Shelleybasic
KCSC-EF SERIES - LIQUITEC REFRIGERATED
COLD
PAN
by Delfield
Shelleyglas ®
by Delfield
Product Information
• One year parts and 90 day labor standard warranty.
Additional warranties available, see below
• All body cutouts reinforced with 14-gauge
channel supports
KCSC-B SERIES ONLY
• KCSC-B Series counters are standard with 7”
deep refrigerated cold pan. Cold pans are fully
insulated with foamed in place polyurethane
insulation
• Pans recessed 2” from top edge of counter
• Cold pans are standard with drain with valve
• Adapter bars will be furnished at no additional
charge if requested on original order only.
Pans are supplied by others
• Optional open shelf and dry door inserts can be
added to all models and lengths. Refrigerated
insert can be added to 60”, 74”, or 96” long units
KCSC-EF SERIES ONLY
• The LiquiTec cold pan has two – six die stamped
openings with depressed edges in each well,
holding one 12” x 20” pan (pans supplied by
others)
• Eutectic fluid completely surrounds each cold
pan providing the maximum-- five sided cooling
• All KCSC-EF models meet NSF 7 with pans
completely flush with counter
• Cold pan is fully insulated with foamed in place
polyurethane insulation
MODEL COLD PAN DIMENSIONS
NUMBER SIZE
L
D
H
AMP H.P.
VOLTS
SHELLEYGLAS REFRIGERATED COLD PAN SERVING COUNTERS
KCSC-36-B
26” x 21.62”
36” 30” 36”
7.0 1/4
115
39” x 21.62”
50” 30” 36”
7.0 1/4
115
KCSC-50-B
52” x 21.62”
60” 30” 36”
7.0 1/4
115
KCSC-60-B
KCSC-74-B
65” x 21.62”
74” 30” 36”
7.0 1/4
115
78” x 21.62”
96” 30” 36”
7.0 1/4
115
KCSC-96-B
7.0
7.0
7.0
7.0
7.0
1/4
1/4
1/4
1/4
1/4
by Delfield
Shelleyspeed ®
by Delfield
KCSC-50-B
Shown with the following options:
HD. double-service two-tier display
A. 12” stainless steel V fold down tray slide
V. 6" adjustable bullet feet
Add eye catching decal packages or bright
canopies to create a distinctive look!
Patented LiquiTec® Technology brings
food and pans completely flush!
Specifications and Prices
SHELLEYGLAS WITH PATENTED LiquiTec® TECHNOLOGY
KCSC-36-EF
2 pan cap
36" 30" 36"
KCSC-50-EF
3 pan cap
50" 30" 36"
KCSC-60-EF
4 pan cap
60" 30" 36"
KCSC-74-EF
5 pan cap
74" 30" 36"
KCSC-96-EF
6 pan cap
96" 30" 36"
Shelleysteel ®
115
115
115
115
115
NEMA
PLUG
SHIP
WEIGHT
FREIGHT CDN LIST
CLASS
PRICE
5-15P
5-15P
5-15P
5-15P
5-15P
350
425
500
575
650
100
100
100
110
110
$8,980
$9,335
$9,810
$12,205
$13,185
5-15P
5-15P
5-15P
5-15P
5-15P
380
455
530
615
680
100
100
100
100
100
$10,250
$10,650
$11,210
$14,635
$15,060
Shelleyglas accessories and modifications can be found on pages 49-57.
Specifications and prices subject to change without notice.
41
Tel: 905-624-1419 • 888-442-7526
Fax: 905-624-1851 • 800-361-2724
For more information, visit www.garlandcanada.ca
SHELLEYGLAS® SERVING LINES
• One piece, molded fiberglass pylon (base), fully
rounded corners, permanent color
• All corners and center sides reinforced with
galvanized bracing, laminated into the fiberglass
• Full NSF and UL Certification
• Fire Code rating on fiberglass, laminate, canopy
materials
• 14-gauge tops
• All units are standard on 5” diameter
polyurethane swivel casters for easy cleaning
• Caster mounting plates laminated into base
• Easy to use stainless steel interlock system is
standard on base and tray slides
• Enclosed bases for vermin control
• A maximum 10’ long cord and plug are supplied
standard
• Uses environmentally friendly R404A refrigerant
• Easy to use stainless steel interlock system is
standard on base and tray slides
• Easily modified with a complete array of standard
accessories
• Electrical connections are 60 hertz, single
phase. Electrical accessories may change listed
amperage and plug
• Counter heights available from 28” to 36” in 2”
increments
• Unit has on/off switch mounted on the exterior
• Add eye catching decal packages or bright
canopies to create a distinctive look!
• Contact Delfield for a Shelleyglas color chart or
visit www.delfield.com
KHCR-B SERIES - HOT/COLD COMBINATION COUNTERS
Shelleybasic
KHC-NU
SERIES - ICE COOLED HOT/COLD COMBINATION COUNTERS
by Delfield
®
Shelleyglas ®
by Delfield
Shelleysteel ®
by Delfield
®
Shelleyspeed
KHCR-50B
SHELLEYGLAS® SERVING LINES
by Delfield
Shown with the following options:
A. 12” stainless steel V fold down tray slide
V. 6" adjustable bullet feet
KHCR2-96-B
Shown with the following option:
KD. double service flip up sneeze guard
Product Information
• Save space by having both hot and cold in one
convenient location
• One piece, molded fiberglass pylon (base), fully
rounded corners, permanent color
• All corners and center sides reinforced with
galvanized bracing, laminated into the fiberglass
• Full NSF and UL Certification
• Fire Code rating on fiberglass, laminate, canopy
materials
• 14-gauge tops
• All units are standard on 5” polyurethane swivel
casters for easy cleaning
• Caster mounting plates laminated into base
• Easy to use stainless steel interlock system is
standard on base and tray slides
• A maximum 10’ long cord and plug are supplied
standard
• All KHCR-B and KHC models are standard with
enclosed bases
• Top has one to four electrically heated, recessed
die-stamped stainless steel hot food warmers.
Each warmer accommodates a 12” x 20” x 6” pan
(pans supplied by others)
• Note: When lights with heat lamps are used over
hot wells, incandescent light fixtures will be used
due to heat
Specifications and Prices
KHC-60-NU
Shown with the following option:
A. 12” stainless steel V fold down tray slide
HD. double service two tier display
V. 6" adjustable bullet feet
MODEL HOT COLD PAN DIMENSIONS
NUMBER WELLS
SIZE
L
D
H AMP H.P.
SHELLEYGLAS SELF-CONTAINED HOT AND COLD COMBINATION COUNTERS
KHCR-50-B
1
26” X 21.62”
50” 30” 36” 16.0 1/4
KHCR-60-B
1
26” X 21.62”
60” 30” 36” 16.0 1/4
KHCR-74-B
1
39” X 21.62”
74” 30” 36” 16.0 1/4
KH2CR-74-B
2
26” X 21.62”
74” 30” 36” 18.0 1/4
KHCR-96-B
1
65” X 21.62”
96” 30” 36” 16.0 1/4
KH2CR-96-B
2
52” X 21.62”
96” 30” 36” 18.0 1/4
KH3CR-96-B
3
39” X 21.62”
96” 30” 36” 23.0 1/4
KH4CR-96-B
4
26” X 21.62”
96” 30” 36” 29.0 1/4
• Electrical connections are 60 hertz, single phase.
Three-phase design is available for an additional
charge. Electrical accessories may change listed
amperage and plug
• All body cutouts reinforced with 14-gauge
channel supports
• Easily modified with a complete array of
standard accessories
• Counter heights available from 28” to 36” in 2”
increments
• Add eye catching decal packages or bright
canopies to create a distinctive look!
• Contact Delfield for a Shelleyglas color chart or
visit www.delfield.com
•One year parts and 90 day labor standard
warranty. Additional warranties available, see
below
KHCR-B ONLY
• The refrigerated cold pan is 7” deep constructed
of stainless steel. Cold pan is equipped with a 1”
drain with valve
• Meets NSF requirements with pans recessed 3”
• Environmentally friendly HFC-404A refrigerant
KHC-NU ONLY
• Insulated ice pan is 7” deep and constructed
of 22-gauge stainless steel. Perforated false
bottom, and drain with valve is standard
VOLTS
NEMA SHIP
PLUG
FREIGHT
WEIGHT
CDN LIST
CLASS
100
100
100
100
100
100
100
100
120
120
120
120/208-230
120
120/208-230
120/208-230
120/208-230
5-20P
5-20P
5-20P
14-30P
5-20P
14-30P
14-30P
14-50P
475
575
688
690
730
740
750
760
MODEL HOT
COLD PAN OVERALL
NUMBER WELLS
SIZE
L
D H H.P. AMP
VOLTS
SHELLEYGLAS ICE-COOLED HOT AND COLD COMBINATION COUNTERS
KHC-50-NU
1
26” X 21.62”
50” 30” 36” — 9.0
120
KHC-60-NU
1
39” X 21.62”
60” 30” 36” — 9.0
120
KHC-74-NU
1
52” X 21.62”
74” 30” 36” — 9.0
120
KH2C-74-NU
2
26” X 21.62”
74” 30” 36” — 11.0
120/208-230
KHC-96-NU
1
65” X 21.62”
96” 30” 36” — 9.0
120
KH2C-96-NU
2
52” X 21.62”
96” 30” 36” — 11.0
120/208-230
KH3C-96-NU
3
39” X 21.62”
96” 30” 36” — 16.0
120/208-230
KH4C-96-NU
4
26” X 21.62”
96” 30” 36” — 22.0
120/208-230
NEMA
PLUG
SHIP
WEIGHT
5-15P
5-15P
5-15P
14-20P
5-15P
14-20P
14-20P
14-30P
300
350
400
410
425
430
450
460
PRICE
$10,025
$10,560
$11,800
$12,670
$14,410
$15,315
$16,050
$17,115
Shelleyglas accessories and modifications can be found on pages 49-57.
Specifications and Prices
FREIGHT CDN LIST
CLASS
PRICE
100
100
100
100
100
100
100
100
$7,200
$7,905
$9,230
$10,110
$11,745
$12,645
$13,525
$14,625
Shelleyglas accessories and modifications can be found on pages 49-57.
Specifications and prices subject to change without notice.
42
Tel: 905-624-1419 • 888-442-7526
Fax: 905-624-1851 • 800-361-2724
For more information, visit www.garlandcanada.ca
KCFT-NU SERIES - FROST TOP SERVING COUNTERS
Shelleybasic ®
by Delfield
Shelleyglas ®
by Delfield
Product Information
• 18”x 26” sheet pan can rest on frost top
• On/off switch located on exterior of unit
• Electrical connections are 60 hertz, single
phase. Electrical accessories may change listed
amperage and plug
• All body cutouts reinforced with 14-gauge
channel supports
• Easily modified with a complete array of standard
accessories
• Counter heights available from 28” to 36”
• Add eye catching decal packages or bright
canopies to create a distinctive look!
• Environmentally friendly R404A refrigerant
• Contact Delfield for a Shelleyglas color chart or
visit www.delfield.com
• One year parts and 90 day labor standard warranty.
Additional warranties available, see below
Shelleysteel ®
by Delfield
®
Shelleyspeed
KCFT-60-NU
by Delfield
Specifications and Prices
MODEL OVERALL
NUMBER DESCRIPTION
L D H
AMP H.P. VOLTS
SHELLEYGLAS FROST TOP SERVING COUNTERS
Without understorage
KCFT-36-NU
frost top
KCFT-50-NU
frost top
KCFT-60-NU
frost top
KCFT-74-NU
frost top
KCFT-96-NU
frost top
36”
50”
60”
74”
96”
30”
30”
30”
30”
30”
36”
36”
36”
36”
36”
7.0
7.0
7.0
8.0
8.0
1/4
1/4
1/4
1/4
1/4
115
115
115
115
115
NEMA
PLUG
SHIP
WEIGHT
5-15P
5-15P
5-15P
5-15P
5-15P
380
455
540
610
680
FREIGHT CDN LIST
CLASS
PRICE
100
100
100
110
110
$9,015
$10,110
$11,295
$12,075
$13,780
Shelleyglas accessories and modifications can be found on pages 49-57.
Specifications and prices subject to change without notice.
43
Tel: 905-624-1419 • 888-442-7526
Fax: 905-624-1851 • 800-361-2724
For more information, visit www.garlandcanada.ca
SHELLEYGLAS® SERVING LINES
• One piece, molded fiberglass pylon (base), fully
rounded corners, permanent color
• All corners and center sides reinforced with
galvanized bracing, laminated into the fiberglass
• Full NSF and UL Certification
• Fire Code rating on fiberglass, laminate, canopy
materials
• 14-gauge tops
• All units are standard on 5” diameter
polyurethane swivel casters for easy cleaning
• Caster mounting plates laminated into base
• Easy to use stainless steel interlock system is
standard on base and tray slides
• Enclosed bases for vermin control
• A maximum 10’ long cord and plug are supplied
standard
• Frost top is 18-gauge stainless steel, one piece
construction; perimeter drain with valve located
at bottom of unit standard
KCI SERIES - ICE PAN SERVING COUNTERS
Shelleybasic ®
by Delfield
Shelleyglas ®
by Delfield
Shelleysteel ®
by Delfield
Shelleyspeed ®
by Delfield
SHELLEYGLAS® SERVING LINES
KCI-50-NU
Shown with the following options:
E. fold down workshelf
H. two tier display
P. open understorage with shelf
Product Information
• Best for use where electricity is not available
• One piece, molded fiberglass pylon (base), fully
rounded corners, permanent color
• All corners and center sides reinforced with
galvanized bracing, laminated into the fiberglass
• Full NSF and UL Certification
• Fire Code rating on fiberglass, laminate, canopy
materials
• 14-gauge tops
• All units are standard on 5” diameter
polyurethane swivel casters for easy cleaning
• Caster mounting plates laminated into base
• Easy to use stainless steel interlock system is
standard on base and tray slides
• Insulated ice pan is 7” deep and is standard with
the following: perforated false bottom, drain with
valve and casters
• KCI units are standard with dry hinged door
storage compartment, while KCI-NU units have
enclosed bases with no understorage
• All body cutouts reinforced with 14-gauge
channel supports
• Easily modified with a complete array of standard
accessories
• Add eye catching decal packages or bright
canopies to create a distinctive look!
• Contact Delfield for a Shelleyglas color chart or
visit www.delfield.com
• One year parts and 90 day labor standard warranty.
Additional warranties available, see below
Specifications and Prices
MODEL ICE PAN NUMBER SIZE
L
SHELLEYGLAS ICE PAN SERVING COUNTERS
DIMENSIONS
D
H
SHIP
WEIGHT
FREIGHT
CLASS
CDN LIST
PRICE
With dry understorage
KCI-36
KCI-50
KCI-60
KCI-74
KCI-96
26” x 21.62”
39” x 21.62”
52” x 21.62”
65” x 21.62”
78” x 21.62”
36”
50”
60”
74”
96”
30”
30”
30”
30”
30”
36”
36”
36”
36”
36”
240
285
320
360
400
110
110
110
110
110
$7,260
$7,725
$8,585
$9,475
$10,985
Without understorage
KCI-36-NU
KCI-50-NU
KCI-60-NU
KCI-74-NU
KCI-96-NU
26” x 21.62”
39” x 21.62”
52” x 21.62”
65” x 21.62”
78” x 21.62”
36”
50”
60”
74”
96”
30”
30”
30”
30”
30”
36”
36”
36”
36”
36”
200
245
280
330
380
110
110
110
110
110
$4,985
$5,520
$6,595
$7,275
$7,520
Shelleyglas accessories and modifications can be found on pages 49-57.
Specifications and prices subject to change without notice.
44
Tel: 905-624-1419 • 888-442-7526
Fax: 905-624-1851 • 800-361-2724
For more information, visit www.garlandcanada.ca
KCU SERIES - BEVERAGE COUNTERS
Shelleybasic ®
by Delfield
Shelleyglas ®
by Delfield
Product Information
• KCU models are standard with dry hinged door
storage compartment
• All body cutouts reinforced with 14-gauge
channel supports
• Easy to use stainless steel interlock system is
standard on base and tray slides
• Easily modified with a complete array of standard
accessories
• Add eye catching decal packages or bright
canopies to create a distinctive look!
• Contact Delfield for a Shelleyglas color chart or
visit www.delfield.com
• One year parts and 90 day labor standard warranty.
Additional warranties available, see below
Shelleysteel ®
by Delfield
Shelleyspeed ®
by Delfield
KCU-36-NU
Shown with the following option:
A. 12” stainless steel V fold down tray slide
Specifications and Prices
MODEL NUMBER DESCRIPTION
L
D
H
SHELLEYGLAS BEVERAGE COUNTERS
SHIP
WEIGHT
FREIGHT
CLASS
CDN LIST
PRICE
With dry understorage
KCU-36
KCU-50
KCU-60
KCU-74
KCU-96
24” urn trough
36” urn trough
48” urn trough
60” urn trough
82” urn trough
36”
50”
60”
74”
96”
30”
30”
30”
30”
30”
36”
36”
36”
36”
36”
200
230
270
300
340
125
125
125
125
125
$5,850
$6,655
$7,225
$8,090
$9,455
Without understorage
KCU-36-NU
KCU-50-NU
KCU-60-NU
KCU-74-NU
KCU-96-NU
24” urn trough
36” urn trough
48” urn trough
60” urn trough
82” urn trough
36”
50”
60”
74”
96”
30”
30”
30”
30”
30”
36”
36”
36”
36”
36”
170
190
230
260
300
125
125
125
125
125
$4,140
$4,535
$5,080
$5,850
$7,190
Shelleyglas accessories and modifications can be found on pages 49-57.
Specifications and prices subject to change without notice.
45
Tel: 905-624-1419 • 888-442-7526
Fax: 905-624-1851 • 800-361-2724
For more information, visit www.garlandcanada.ca
SHELLEYGLAS® SERVING LINES
• One piece, molded fiberglass pylon (base), fully
rounded corners, permanent color
• All corners and center sides reinforced with
galvanized bracing, laminated into the fiberglass
• Full NSF and UL Certification
• Fire Code rating on fiberglass, laminate, canopy
materials
• 14-gauge tops
• All units are standard on 5” diameter
polyurethane swivel casters for easy cleaning
• Caster mounting plates laminated into base
• A maximum 10’ long cord and plug are supplied
standard
• Reinforced top includes a stainless steel drain
trough with removable stainless steel anti-splash
drip gate. (Trough is standard on customer side,
available on operator side if specified.)
KC SERIES - ALL PURPOSE COUNTERS
Shelleybasic ®
by Delfield
Shelleyglas ®
by Delfield
Shelleysteel ®
by Delfield
Shelleyspeed ®
by Delfield
KC-28-NU
SHELLEYGLAS® SERVING LINES
Shown with the following options:
C. tubular fold down trayslide
P. open understorage with shelf
Product Information
• One piece, molded fiberglass pylon (base), fully
rounded corners, permanent color
• All corners and center sides reinforced with
galvanized bracing, laminated into the fiberglass
• Full NSF and UL Certification
• Fire Code rating on fiberglass, laminate, canopy
materials
• All units are standard on 5” diameter
polyurethane swivel casters for easy cleaning
• Caster mounting plates laminated into base
• Enclosed bases for vermin control
• Flat 14-gauge stainless steel top
• KC models are standard with dry hinged door
storage compartment
• Easy to use stainless steel interlock system is
standard on base and tray slides
• Easily modified with a complete array of standard
accessories
• Add eye catching decal packages or bright
canopies to create a distinctive look!
• Contact Delfield for a Shelleyglas color chart or
visit www.delfield.com
• One year parts and 90 day labor standard warranty.
Additional warranties available, see below
Specifications and Prices
MODEL NUMBER DESCRIPTION
L
D
H
SHELLEYGLAS ALL PURPOSE COUNTERS
KC-50-NU
Shown with the following options:
A. 12” stainless steel V fold down tray slide
G. glass front counter protector
SHIP
WEIGHT
FREIGHT
CLASS
CDN LIST
PRICE
With dry understorage
KC-28
KC-36
KC-50
KC-60
KC-74
KC-96
dry storage
dry storage
dry storage
dry storage
dry storage
dry storage
28”
36”
50”
60”
74”
96”
30”
30”
30”
30”
30”
30”
36”
36”
36”
36”
36”
36”
165
185
205
240
270
310
125
125
125
125
125
125
$4,630
$5,345
$5,950
$6,685
$7,310
$8,585
Without understorage
KC-28-NU
KC-36-NU
KC-50-NU
KC-60-NU
KC-74-NU
KC-96-NU
enclosed base
enclosed base
enclosed base
enclosed base
enclosed base
enclosed base
28”
36”
50”
60”
74”
96”
30”
30”
30”
30”
30”
30”
36”
36”
36”
36”
36”
36”
120
160
180
210
240
280
125
125
125
125
125
125
$3,150
$3,325
$3,940
$4,465
$5,105
$6,160
Shelleyglas accessories and modifications can be found on pages 49-57.
KC-74-NU
Shown with optional canopy, sandwich
slide and trayslide
Specifications and prices subject to change without notice.
46
Tel: 905-624-1419 • 888-442-7526
Fax: 905-624-1851 • 800-361-2724
For more information, visit www.garlandcanada.ca
KCM SERIES - MILK COUNTERS
KCF SERIES - ICE CREAM COUNTERS
Shelleybasic
by Delfield
KCFM SERIES - MILK AND ICE CREAM COUNTERS
®
Shelleyglas ®
Product Information
by Delfield
• Milk capacities are based on half pint, 2.75” x
2.75” gable top cartons
• 60 hertz, single phase electrical standard
• All body cutouts reinforced with 14-gauge
channel supports
• Easy to use interlock system is standard on base
and tray slides
• Easily modified with a complete array of standard
accessories
• Add eye catching decal packages to create a
distinctive look!
• Contact Delfield for a Shelleyglas color chart or
visit www.delfield.com
• One year parts and 90 day labor standard warranty.
Additional warranties available, see below
KCM SERIES ONLY
• HFC-134A refrigerant is standard
KCF SERIES ONLY
• Environmentally friendly R404A refrigerant
KCFM SERIES ONLY
• HFC-134A refrigerant is standard
Shelleysteel ®
by Delfield
Shelleyspeed ®
by Delfield
KCM-50
Shown with the following option:
C. tubular fold down tray slide
KCFM-50
Specifications and Prices
MODEL NUMBER LID(S) DESCRIPTION
L
D
H
AMP H.P. VOLTS
SHELLEYGLAS MILK COUNTERS—40°F STORAGE ONLY
KCM-36
1
126 cartons
36” 30” 36”
5.0
1/4
115
2
252 cartons
50” 30” 36”
5.0
1/4
115
KCM-50
KCM-60
3
378 cartons
60” 30” 36”
5.0
1/4
115
504 cartons
74” 30” 36”
5.0
1/4
115
KCM-744
SHELLEYGLAS ICE CREAM COUNTERS—0°F STORAGE ONLY
1
210 cups
36” 30”
KCF-36
KCF-50 2
420 cups
50” 30”
3
630 cups
60” 30”
KCF-60 KCF-74 4
840 cups
74” 30”
36”
36”
36”
36”
7.1
7.1
8.0
8.0
1/4
1/4
1/3
1/3
SHELLEYGLAS MILK AND ICE CREAM COUNTERS—40°F AND 0°F STORAGE ONLY
KCFM-50
2
126 cartons
50” 30” 36”
7.1
1/4
or 210 cup
KCFM-74 4
252 cartons
74” 30” 36”
8.0
1/3
or 420 cups
NEMA
PLUG
SHIP FREIGHT
WEIGHT CLASS
CDN LIST
PRICE
5-15P
5-15P
5-15P
5-15P
400
450
500
550
92.5
92.5
92.5
92.5
$11,165
$12,680
$13,975
$16,295
115
115
115
115
5-15P
5-15P
5-15P
5-15P
475
525
575
625
92.5
92.5
92.5
92.5
$11,800
$13,890
$15,665
$18,035
115
5-15P
500
92.5
$14,530
115
5-15P
590
92.5
$18,880
Shelleyglas accessories and modifications can be found on pages 49-57.
Specifications and prices subject to change without notice.
47
Tel: 905-624-1419 • 888-442-7526
Fax: 905-624-1851 • 800-361-2724
For more information, visit www.garlandcanada.ca
SHELLEYGLAS® SERVING LINES
• One piece, molded fiberglass pylon (base), fully
rounded corners, permanent color
• All corners and center sides reinforced with
galvanized bracing, laminated into the fiberglass
• Full NSF and UL Certification
• Fire Code rating on fiberglass, laminate, canopy
materials
• 14-gauge tops
• All units are standard on 5” diameter
polyurethane swivel casters for easy cleaning
• Caster mounting plates laminated into base
• Easy to use stainless steel interlock system is
standard on base and tray slides
• Enclosed bases for vermin control
• A maximum 10’ long cord and plug are supplied
standard
• Top has one; two, three or four die stamped
openings and is provided with hinged stainless
steel removable lids
• Watertight inner liner has radius corners for easy
cleaning
• Equipped with a drain plumbed to a drain valve
• Refrigerated compartment is equipped with
automatic self-leveling, field adjustable elevators.
Divider trays are supplied
KCS SERIES - CASHIER’S COUNTERS
KRB SERIES - CARVING COUNTERS
KCTS SERIES - TRAY STANDS
PWT
SERIES
- WORK TABLES
Shelleybasic
by Delfield
®
Shelleyglas ®
by Delfield
Shelleysteel ®
by Delfield
Shelleyspeed ®
KCS-36
by Delfield
SHELLEYGLAS® SERVING LINES
Shown with the following option:
(2) E. 10” stainless steel fold-down work
shelves (being used as tray slides)
KRB
Shown with the following options:
F. line-up interlock device
A. 12” stainless steel V fold-down tray slide
Product Information
• One piece, molded fiberglass pylon (base), fully
rounded corners, permanent color
• All corners and center sides reinforced with
galvanized bracing, laminated into the fiberglass
• 14-gauge tops
• Full NSF and UL Certification
• Fire Code rating on fiberglass, laminate, canopy
materials
• All units are standard on 5” diameter
polyurethane swivel casters for easy cleaning
• Caster mounting plates laminated into base
• Easy to use stainless steel interlock system is
standard on base and tray slides
• Easily modified with a complete array of standard
accessories
• All body cutouts reinforced with 14-gauge
channel supports
• Contact Delfield for a Shelleyglas color chart or
visit www.delfield.com
• One year parts and 90 day labor standard warranty.
Additional warranties available, see below
KCS SERIES ONLY
• A 3” grommet hole is located at the rear of the
top to allow cord access for cash registers
• Stainless steel locking cash drawer standard
• Stainless steel under shelf can serve as foot rest
or storage
• All body cutouts reinforced with 14-gauge
channel supports
• Add eye catching decal packages or bright
canopies to create a distinctive look!
KRB SERIES ONLY
• Enclosed bases for vermin control
• A maximum 10’ long cord and plug are supplied
standard
• KRB counters are standard with stainless steel
removable carving tray, heated au jus well, nonadjustable infrared heat lamp, dry under storage
compartment with hinged doors
• 10’ cord and plug are standard
• KRB models are standard with dry hinged door
storage compartment with shelf
• Electrical accessories may change listed
amperage and plug
KCTS SERIES ONLY
• All units are standard on 5” diameter swivel
casters for easy cleaning and mobility
• Caster mounting plates laminated into base
• Easy to use interlock system is standard on base
and tray slides
• 14-gauge stainless steel top and tray step down
• Silverware cutouts and cylinders are optional
Specifications and Prices
PWT-60
MODEL NUMBER DESCRIPTION
L
D
H
AMP
VOLTS
SHELLEYGLAS CASHIER’S COUNTERS
KCS-30
cashier’s counter
30” 30” 36” N/A
N/A
KCS-36
cashier’s counter
30” 36” 36” N/A
N/A
KCS-50
cashier’s counter
30” 50” 36” N/A
N/A
NEMA
PLUG
SHIP
WEIGHT
FREIGHT
CLASS
CDN LIST
PRICE
N/A
N/A
N/A
180
210
270
100
100
100
$3,800
$4,095
$4,710
KRB
SHELLEYGLAS CARVING COUNTERS
carving counter
28”
30”
36”
5.0
120
5-15P
180
100
$8,200
SHELLEYGLAS TRAY STANDS
KCTS-28
tray stand
KCTS-36
tray stand
30”
30”
28”
36”
36”
36”
N/A
N/A
N/A
N/A
N/A
N/A
150
192
125
125
$2,900
$3,020
SHELLEYGLAS WORK TABLES
work table
work table
work table
work table
36”
48”
60”
74”
30”
30”
30”
30”
36”
36”
36”
36”
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
100
158
200
230
125
125
125
125
$2,855
$3,150
$3,315
$3,480
PWT-36
PWT-48
PWT-60
PWT-74
Shelleyglas accessories and modifications can be found on pages 49-57.
Specifications and prices subject to change without notice.
48
Tel: 905-624-1419 • 888-442-7526
Fax: 905-624-1851 • 800-361-2724
For more information, visit www.garlandcanada.ca
SHELLEYSTEEL/SHELLEYGLAS EQUIPMENT ACCESSORIES
C. 10” three-bar tubular fold-down tray slide
D. 10” composite fold-down cutting board
E. 10” stainless steel fold-down work shelf
G. Glass front counter protector
H. Two-tier display w/glass shelves and sneeze guards
I. Three-tier display w/glass shelves and sneeze guards
J. 12” stainless steel overshelf, 18-gauge
KD. Double service flip-up sneeze guard shown with optional powder
coating
KS. Single service flip-up sneeze guard shown with optional powder
coating
P. Open shelf understorage
S. Lid locking device
SG16. Pizza pan insert
SG9A. Single mechanical access door to interior
SG9B. Double mechanical access doors to interior - shown
HD. Double service two-tier display with glass shelves
guards
and sneeze
Accessory and
modifications pricing on
pages 50-57.
SG22A. Slanted overshelf
SG22B. Double slanted overshelf
Specifications and prices subject to change without notice.
49
Tel: 905-624-1419 • 888-442-7526
Fax: 905-624-1851 • 800-361-2724
For more information, visit www.garlandcanada.ca
SHELLEYSTEEL/SHELLEYGLAS SERVING LINE ACCESSORIES
A. 12” stainless steel V fold-down tray slide
SHELLEYSTEEL/SHELLEYGLAS SERVING LINE ACCESSORIES
SHELLEYSTEEL/SHELLEYGLAS EQUIPMENT ACCESSORIES
KH/SH - Heated serving counters
-2
-3
-4
-5
-6
A.
B.
C.
D.
E.
F.
FD.
G.
J.
J2.
KD.
KS.
L.
M.
MB.
P.
Q.
QQ.
ST.
U.
UU.
V.
$935
$935
$665
$960
$800
N/C
$420
$1,490
$605
$1,195
$1,615
$1,155
$665
$1,250
$1,195
$1,380
$800
$825
$260
$675
$460
N/C
N/C
$880
($325)
$1,145
$1,145
$910
$1,070
$1,070
N/C
$420
$1,715
$870
$1,715
$1,855
$1,380
$755
$1,380
$1,595
$1,645
$800
$1,115
$260
$675
$460
N/C
N/C
$880
$1,350
$1,350
$1,080
$1,310
$1,275
N/C
$420
$1,865
$935
$1,855
$2,210
$1,605
$935
$1,595
$1,975
$1,855
$800
$1,370
$260
$675
$460
N/C
N/C
$880
$1,680
$1,680
$1,285
$1,545
$1,595
N/C
$420
$2,020
$1,295
$2,580
$2,745
$2,000
$1,115
$1,855
$2,390
$2,140
$800
$1,700
$260
$675
$460
N/C
N/C
$880
$1,910
$1,910
$1,715
$2,055
$2,010
N/C
$420
$2,425
$1,625
$3,250
$3,075
$2,140
$1,285
$2,505
$3,100
$2,480
$800
$2,250
$260
$675
$460
N/C
N/C
$880
KCSC/SCSC - Refrigerated cold pan serving counters
-36
-50
-60
-74
-96
A.
B.
C.
D.
E.
F.
FD.
G.
H.
HD.
I.
J.
J2.
KD.
KS.
L.
PR.
Q.
ST.
U.
UU.
V.
$935
$935
$665
$960
$800
N/C
$420
$1,490
$2,270
$2,920
$4,180
$605
$1,195
$1,615
$1,155
$1,260
$1,260
$800
$260
$675
$460
N/C
N/C
N/C
$880
$1,145
$1,145
$910
$1,070
$1,070
N/C
$420
$1,715
$3,040
$3,670
$5,030
$870
$1,715
$1,855
$1,380
$1,380
$1,380
$800
$260
$675
$460
N/C
N/C
N/C
$880
$1,350
$1,350
$1,080
$1,310
$1,275
N/C
$420
$1,865
$3,610
$4,425
$5,345
$935
$1,855
$2,210
$1,605
$1,605
$1,605
$800
$260
$675
$460
N/C
N/C
N/C
$880
$1,680
$1,680
$1,285
$1,545
$1,595
N/C
$420
$2,020
$4,525
$5,410
$6,345
$1,295
$2,580
$2,745
$2,000
$1,820
$1,820
$800
$260
$675
$460
N/C
N/C
N/C
$880
$1,910
$1,910
$1,715
$2,055
$2,010
N/C
$420
$2,425
$4,915
$6,335
$7,870
$1,625
$3,250
$3,075
$2,140
$2,010
$2,010
$800
$260
$675
$460
N/C
N/C
N/C
$880
12” stainless steel V fold-down tray slide (old style)
12” stainless steel V style, 14-gauge fold-down tray slide
10” three-bar tubular fold-down tray slide
10” composite fold-down cutting board
10” stainless steel fold-down work shelf
Line-up interlock device
Fiberglass door panel insert (KH only)
Glass front counter protector
12” stainless steel overshelf, 18-gauge
12” stainless steel overshelf — two tier
Double service flip-up sneeze guard
Single service flip-up sneeze guard
Incandescent light fixture*
Radiant heat lamp w/ on-off switch (fits G, J, KS, KD)*
Bullet-style heat lamp*
Open understorage with shelf (KH-NU & SH-NU only)
115/15A outlet with 10A breaker*
Drains from food wells, plumbed to common valve
Stainless steel trim strip
14” x 30” stainless steel end drop shelf
Molded fiberglass trim strip (KH only) each
Adjustable stainless steel bullet feet
Laminate exterior base finish (SH units only)
Three phase electrical system
Omit one hot food well (credit)
* Inclusion of these options will alter the electrical specifications of unit.
12” stainless steel V fold-down tray slide (old style)
12” stainless steel V style, 14-gauge fold-down tray slide
10” three-bar tubular fold-down tray slide
10” composite fold-down cutting board
10” stainless steel fold-down work shelf
Line-up interlock device
Fiberglass door panel insert (KCSC only)
Glass front counter protector
Two-tier display w/glass shelves & sneeze guard
Double service two-tier display with sneeze guard
Three-tier display w/glass shelves & sneeze guard
12” stainless steel overshelf, 18-gauge
12” stainless steel overshelf — two tier
Double service flip-up sneeze guard
Single service flip-up sneeze guard
Incandescent light fixture*
Open understorage with shelf
115/15A outlet with 10A breaker*
Stainless steel trim strip
14” x 30” stainless steel end drop shelf
Molded fiberglass trim strip (KCSC only) each
Adjustable stainless steel bullet feet
Laminate exterior base finish (SCSC units only)
Decrease depth of cold pan 1.38” - 5”
Increase depth of cold pan 7” - 12”
* Inclusion of these options will alter the electrical specifications of unit.
Specifications and prices subject to change without notice.
50
Tel: 905-624-1419 • 888-442-7526
Fax: 905-624-1851 • 800-361-2724
For more information, visit www.garlandcanada.ca
SHELLEYSTEEL/SHELLEYGLAS EQUIPMENT ACCESSORIES
-36
-50
-60
-74
-96
A.
B.
C.
D.
E.
F.
G.
H.
HD.
I.
J.
J2.
KD.
KS.
L.
M.
MB.
PR.
Q.
QQ.
ST.
U.
UU.
V.
$935
$935
$665
$960
$800
N/C
$1,490
$2,270
$2,920
$4,180
$605
$1,195
$1,615
$1,155
$1,260
$1,250
$1,195
$1,595
$800
$825
$260
$675
$460
N/C
N/C
$1,145
$1,145
$910
$1,070
$1,070
N/C
$1,715
$3,040
$3,670
$5,030
$870
$1,715
$1,855
$1,380
$1,380
$1,380
$1,595
$1,735
$800
$1,115
$260
$675
$460
N/C
N/C
$1,350
$1,350
$1,080
$1,310
$1,275
N/C
$1,800
$3,610
$4,425
$5,345
$935
$1,855
$2,210
$1,605
$1,605
$1,595
$1,975
$2,020
$800
$1,370
$260
$675
$460
N/C
N/C
$1,680
$1,680
$1,285
$1,545
$1,595
N/C
$2,020
$4,525
$5,410
$6,345
$1,295
$2,580
$2,745
$2,000
$1,820
$1,855
$2,390
$2,285
$800
$1,700
$260
$675
$460
N/C
N/C
$1,910
$1,910
$1,715
$2,055
$2,010
N/C
$2,425
$4,915
$6,335
$7,870
$1,625
$3,250
$3,075
$2,140
$2,010
$2,505
$3,100
$2,535
$800
$2,315
$260
$675
$460
N/C
N/C
KCFT/SCFT - Frost top serving counters
-36
-50
-60
-74
-96
A.
B.
C.
D.
E.
F.
FD.
G.
H.
HD.
I.
J.
J2.
KD.
KS.
L.
PR.
PS.
Q.
ST.
U.
UU.
V.
$935
$935
$665
$960
$800
N/C
$420
$1,490
$2,270
$2,920
$4,180
$605
$1,195
$1,615
$1,155
$1,260
$1,595
$555
$800
$260
$675
$460
N/C
N/C
$1,145
$1,145
$910
$1,070
$1,070
N/C
$420
$1,715
$3,040
$3,670
$5,030
$870
$1,715
$1,855
$1,380
$1,380
$1,735
$555
$800
$260
$675
$460
N/C
N/C
$1,350
$1,350
$1,080
$1,310
$1,275
N/C
$420
$1,865
$3,610
$4,425
$5,345
$935
$1,855
$2,210
$1,605
$1,605
$2,020
$555
$800
$260
$675
$460
N/C
N/C
$1,680
$1,680
$1,285
$1,545
$1,595
N/C
$420
$2,020
$4,525
$5,410
$6,345
$1,295
$2,580
$2,745
$2,000
$1,820
$2,285
$555
$800
$260
$675
$460
N/C
N/C
$1,910
$1,910
$1,715
$2,055
$2,010
N/C
$420
$2,425
$4,915
$6,335
$7,870
$1,625
$3,250
$3,075
$2,140
$2,010
$2,535
$555
$800
$260
$675
$460
N/C
N/C
12” stainless steel V fold-down tray slide (old style)
12” stainless steel V style, 14-gauge fold-down tray slide
10” three-bar tubular fold-down tray slide
10” composite fold-down cutting board
10” stainless steel fold-down work shelf
Line-up interlock device
Glass front counter protector
Two-tier display w/glass shelves & sneeze guard
Double service two-tier display with sneeze guard
Three-tier display w/glass shelves & sneeze guard
12” stainless steel overshelf, 18-gauge
12” stainless steel overshelf — two tier
Double service flip-up sneeze guard
Single service flip-up sneeze guard
Incandescent light fixture*
Radiant heat lamp w/ on-off switch (fits G, J, KS, KD)*
Bullet-style heat lamp*
Open understorage with shelf
115/15A outlet with 10A breaker*
Drains from food wells, plumbed to common valve
Stainless steel trim strip
14” x 30” stainless steel end drop shelf
Molded fiberglass trim strip (KCSR only) each
Adjustable stainless steel bullet feet
Laminate exterior base finish (SHCR units only)
* Inclusion of these options will alter the electrical specifications of unit.
12” stainless steel V fold-down tray slide (old style)
12” stainless steel V style, 14-gauge fold-down tray slide
10” three-bar tubular fold-down tray slide
10” composite fold-down cutting board
10” stainless steel fold-down work shelf
Line-up interlock device
Fiberglass door panel insert (KCFT only)
Glass front counter protector
Two-tier display w/glass shelves & sneeze guard
Double service two-tier display with sneeze guard
Three-tier display w/glass shelves & sneeze guard
12” stainless steel overshelf, 18-gauge
12” stainless steel overshelf — two tier
Double service flip-up sneeze guard
Single service flip-up sneeze guard
Incandescent light fixture*
Open understorage with shelf
Pan slides (in refrigerated understorage only)
115/15A outlet with 10A breaker*
Stainless steel trim strip
14” x 30” stainless steel end drop shelf
Molded fiberglass trim strip (KCFT only) each
Adjustable stainless steel bullet feet
Laminate exterior base finish (SCFT units only)
* Inclusion of these options will alter the electrical specifications of unit.
Specifications and prices subject to change without notice.
51
Tel: 905-624-1419 • 888-442-7526
Fax: 905-624-1851 • 800-361-2724
For more information, visit www.garlandcanada.ca
SHELLEYSTEEL/SHELLEYGLAS SERVING LINE ACCESSORIES
KHC, KHCR/SHC & SHCR - Hot & cold combination counters
SHELLEYSTEEL/SHELLEYGLAS SERVING LINE ACCESSORIES
SHELLEYSTEEL/SHELLEYGLAS EQUIPMENT ACCESSORIES
KCI/SCI - Ice pan serving counters
-36
-50
-60
-74
-96
A.
B.
C.
D.
E.
F.
FD.
G.
H.
HD.
I.
J.
J2.
KD.
KS.
L.
P.
ST.
U.
UU.
V.
$935
$935
$665
$960
$800
N/C
$420
$1,490
$2,270
$2,920
$4,180
$605
$1,195
$1,615
$1,155
$1,260
$1,380
$260
$675
$460
N/C
N/C
$880
N/C
$1,145
$1,145
$910
$1,070
$1,070
N/C
$420
$1,715
$3,040
$3,670
$5,030
$870
$1,715
$1,855
$1,380
$1,380
$1,645
$260
$675
$460
N/C
N/C
$880
N/C
$1,350
$1,350
$1,080
$1,310
$1,275
N/C
$420
$1,865
$3,610
$4,425
$5,345
$935
$1,855
$2,210
$1,605
$1,605
$1,855
$260
$675
$460
N/C
N/C
$880
N/C
$1,680
$1,680
$1,285
$1,545
$1,595
N/C
$420
$2,020
$4,525
$5,410
$6,345
$1,295
$2,580
$2,745
$2,000
$1,820
$2,140
$260
$675
$460
N/C
N/C
$880
N/C
$1,910
$1,910
$1,715
$2,055
$2,010
N/C
$420
$2,425
$4,915
$6,335
$7,870
$1,625
$3,250
$3,075
$2,140
$2,010
$2,480
$260
$675
$460
N/C
N/C
$880
N/C
KCU/SCU - Beverage counters
-36
-50
-60
-74
-96
A.
B.
C.
D.
E.
F.
FD.
FF.
P.
Q.
ST.
U.
UU.
V.
$935
$935
$665
$960
$800
N/C
$420
$880
$1,380
$800
$260
$675
$460
N/C
N/C
$1,145
$1,145
$910
$1,070
$1,070
N/C
$420
$1,030
$1,645
$800
$260
$675
$460
N/C
N/C
$1,350
$1,350
$1,080
$1,310
$1,275
N/C
$420
$1,195
$1,855
$800
$260
$675
$460
N/C
N/C
$1,680
$1,680
$1,285
$1,545
$1,595
N/C
$420
$1,350
$2,140
$800
$260
$675
$460
N/C
N/C
$1,910
$1,910
$1,715
$2,055
$2,010
N/C
$420
$1,500
$2,480
$800
$260
$675
$460
N/C
N/C
12” stainless steel V fold-down tray slide (old style)
12” stainless steel V style, 14-gauge fold-down tray slide
10” three-bar tubular fold-down tray slide
10” composite fold-down cutting board
10” stainless steel fold-down work shelf
Line-up interlock device
Fiberglass door panel insert (KCSC only)
Glass front counter protector
Two-tier display w/glass shelves & sneeze guard
Double service two-tier display with sneeze guard
Three-tier display w/glass shelves & sneeze guard
12” stainless steel overshelf, 18-gauge
12” stainless steel overshelf — two tier
Double service flip-up sneeze guard
Single service flip-up sneeze guard
Incandescent light fixture*
Open understorage with shelf
Stainless steel trim strip
14” x 30” stainless steel end drop shelf
Molded fiberglass trim strip (KCSC only) each
Adjustable stainless steel bullet feet
Modify depth of cold pan (1.38” to 5”)
Increase depth of cold pan 7” - 12” any length up to 96”
Laminate exterior base finish (SCI-NU units only)
* Inclusion of these options will alter the electrical specifications of unit.
12” stainless steel V fold-down tray slide (old style)
12” stainless steel V style, 14-gauge fold-down tray slide
10” three-bar tubular fold-down tray slide
10” composite fold-down cutting board
10” stainless steel fold-down work shelf
Line-up interlock device
Fiberglass door panel insert (KCUonly)
Extra drain trough for dual service
Open understorage with shelf (KCU-NU & SCU-NU units only)
115/15A outlet with 10A breaker*
Stainless steel trim strip
14” x 30” stainless steel end drop shelf
Molded fiberglass trim strip (KCFT only) each
Adjustable stainless steel bullet feet
Laminate exterior base finish (SCU units only)
* Inclusion of these options will alter the electrical specifications of unit.
Specifications and prices subject to change without notice.
52
Tel: 905-624-1419 • 888-442-7526
Fax: 905-624-1851 • 800-361-2724
For more information, visit www.garlandcanada.ca
SHELLEYSTEEL/SHELLEYGLAS EQUIPMENT ACCESSORIES
-36
-50
-60
-74
-96
A.
B.
C.
D.
E.
F.
FD.
G.
H.
HD.
I.
J.
J2.
KD.
KS.
L.
M.
MB.
P.
Q.
ST.
U.
UU.
V.
$935
$935
$665
$960
$800
N/C
$420
$1,490
$2,270
$2,920
$4,180
$605
$1,195
$1,615
$1,155
$1,260
$1,250
$1,195
$1,380
$800
$260
$675
$460
N/C
N/C
$1,145
$1,145
$910
$1,070
$1,070
N/C
$420
$1,715
$3,040
$3,670
$5,030
$870
$1,715
$1,855
$1,380
$1,380
$1,380
$1,595
$1,645
$800
$260
$675
$460
N/C
N/C
$1,350
$1,350
$1,080
$1,310
$1,275
N/C
$420
$1,865
$3,610
$4,425
$5,345
$935
$1,855
$2,210
$1,605
$1,605
$1,595
$1,975
$1,855
$800
$260
$675
$460
N/C
N/C
$1,680
$1,680
$1,285
$1,545
$1,595
N/C
$420
$2,020
$4,525
$5,410
$6,345
$1,295
$2,580
$2,745
$2,000
$1,820
$1,855
$2,390
$2,140
$800
$260
$675
$460
N/C
N/C
$1,910
$1,910
$1,715
$2,055
$2,010
N/C
$420
$2,425
$4,915
$6,335
$7,870
$1,625
$3,250
$3,075
$2,140
$2,010
$2,505
$3,100
$2,480
$800
$260
$675
$460
N/C
N/C
12” stainless steel V fold-down tray slide (old style)
12” stainless steel V style, 14-gauge fold-down tray slide
10” three-bar tubular fold-down tray slide
10” composite fold-down cutting board
10” stainless steel fold-down work shelf
Line-up interlock device
Fiberglass door panel insert (KC only)
Glass front counter protector
Two-tier display w/glass shelves & sneeze guard
Double service two-tier display with sneeze guard
Three-tier display w/glass shelves & sneeze guard
12” stainless steel overshelf, 18-gauge
12” stainless steel overshelf — two tier
Double service flip-up sneeze guard
Single service flip-up sneeze guard
Incandescent light fixture*
Radiant heat lamp w/ on-off switch (fits G, J, KS, KD)*
Bullet-style heat lamp*
Open understorage with shelf (KC & SC units only)
115/15A outlet with 10A breaker*
Stainless steel trim strip
14” x 30” stainless steel end drop shelf
Molded fiberglass trim strip (KC only) each
Adjustable stainless steel bullet feet
Laminate exterior base finish (SC units only)
* Inclusion of these options will alter the electrical specifications of unit.
KCM, KCF, KCFM/SCM, SCF & SCFM - Milk & ice cream counters
-36
-50
-60
-74
A.
B.
C.
D.
E.
F.
R.
$935
$935
$665
$960
$800
N/C
$260
$895
—
—
—
—
$545
$260
$675
$460
N/C
N/C
$30
$1,145
$1,145
$910
$1,070
$1,070
N/C
$260
—
$1,195
$1,195
—
—
$545
$260
$675
$460
N/C
N/C
$30
$1,350
$1,350
$1,080
$1,310
$1,275
N/C
$260
—
—
—
$1,785
—
$545
$260
$675
$460
N/C
N/C
$30
$1,680
$1,680
$1,285
$1,545
$1,595
N/C
$260
—
—
—
—
$2,380
$545
$260
$675
$460
N/C
N/C
$30
S.
ST.
U.
UU.
V.
12” stainless steel V fold-down tray slide (old style)
12” stainless steel V style, 14-gauge fold-down tray slide
10” three-bar tubular fold-down tray slide
10” composite fold-down cutting board
10” stainless steel fold-down work shelf
Line-up interlock device
4” high chrome-plated wire baskets (per three)
6 baskets (KCF-36 & SCF-36 only)
12 baskets (KCM-50, KCFM-50, SCM-50 & SCFM-50 only)
12 baskets (KCF-50 & SCF-50 only)
18 baskets (KCFM-60 &SCFM-60 only)
24 baskets (KCM-74 , KCFM-74, SCM-74 & SCFM-74)
Lid locking device, with “T” handle
Stainless steel trim strip
14” x 30” stainless steel end drop shelf
Molded fiberglass trim strip (KC only) each
Adjustable stainless steel bullet feet
Laminate exterior base finish (SCM, SCF & SCFM units only)
Additional stainless steel divider tray (each)
Specifications and prices subject to change without notice.
53
Tel: 905-624-1419 • 888-442-7526
Fax: 905-624-1851 • 800-361-2724
For more information, visit www.garlandcanada.ca
SHELLEYSTEEL/SHELLEYGLAS SERVING LINE ACCESSORIES
KC/SC - All purpose counters
SHELLEYSTEEL/SHELLEYGLAS SERVING LINE ACCESSORIES
SHELLEYSTEEL/SHELLEYGLAS EQUIPMENT ACCESSORIES
PWT/SWT - Serving counters
-36
-50
-60
-74
D.
E.
EE.
F.
J.
O.
ST.
SW6.
SW8.
SW10.
U.
UU.
V.
$960
$800
$960
N/C
$605
$640
$260
$780
$910
$1,055
$675
$460
N/C
$1,070
$1,070
$960
N/C
$870
$860
$260
$780
$910
$1,055
$675
$460
N/C
$1,310
$1,275
$960
N/C
$930
$1,055
$260
$780
$910
$1,055
$675
$460
N/C
$1,545
$1,595
$960
N/C
$1,295
$1,260
$260
$780
$910
$1,055
$675
$460
N/C
10” composite fold-down cutting board
10” stainless steel fold-down work shelf
Stainless steel locking utility drawer
Line-up interlock device
12” stainless steel overshelf, 18-gauge
Stainless steel undershelf, 16-gauge
Stainless steel trim strip
(6) Silverware cutouts w/plastic bins
(8) Silverware cutouts w/plastic bins
(10) Silverware cutouts w/plastic bins
14” x 30” stainless steel end drop shelf
Molded fiberglass trim strip each
Adjustable stainless steel bullet feet
KCS/SCS, KRB/SRB & KCTS/SCTS - Utility equipment
A.
B.
C.
D.
E.
F.
FD.
PAN3.
Q.
ST.
SW6.
SW8.
SW8-PI.
SW10.
T.
U.
UU.
V.
12” stainless steel V fold-down tray slide
12” stainless steel V style, 14-gauge fold-down tray slide
10” three-bar tubular fold-down tray slide
10” composite fold-down cutting board
10” stainless steel fold-down work shelf
Line-up interlock device
Fiberglass door panel insert (KRB only)
(3) 1/3 x 6" deep pans
115/15A outlet with 10A breaker*
Stainless steel trim strip
(6) Silverware cutouts w/plastic bins (8) Silverware cutouts w/plastic bins (8) Silverware cutouts w/ plastic bins and (1) 1/3 x 6" deep pan
(10) Silverware cutouts w/stainless steel bins Heated storage with stainless steel center wire shelf (KRB/SRB only)
14” x 30” stainless steel end drop shelf
Molded fiberglass trim strip each
Adjustable stainless steel bullet feet
$910
$935
$665
$825
$800
N/C
$420
$800
$800
$260
$780
$910
$1,175
$1,055
$1,965
$675
$460
N/C
* Inclusion of these options will alter the electrical specifications of unit.
Specifications and prices subject to change without notice.
54
Tel: 905-624-1419 • 888-442-7526
Fax: 905-624-1851 • 800-361-2724
For more information, visit www.garlandcanada.ca
SHELLEYSTEEL/SHELLEYGLAS EQUIPMENT ACCESSORIES
Special Modifications (available on all equipment except where noted)
SG1 Backsplash
SG2
A. 2” x 4” backsplash return on end - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - $480
B. 2” x 4” high backsplash (per foot; 3’ minimum) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - $505
Custom Fiberglass Color (Shelleyglas only) sample required
Add to standard unit price; specify color on original order (per job) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - $1,155
SG2PSCustom Polystone Fiberglass Color (Shelleyglas only)
SG3
SG5
SG6
SG7
SG8
SG9
Add to standard unit price; specify color on original order (per unit) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - $620
Deck Mounted Outlets - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - $1,055
Dry Storage Compartments
A. Single door - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - $1,975
B. Double door - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - $2,685
Fan Assist Package (Refrigerated cold pans) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - $925
Ferruled Holes
B. 1” diameter (each) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - $105
C. 2” diameter (each) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - $105
Heated Interior Sections
A. Single door with pan slides 15.62” long - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - $2,315
B. Single door with pan slides 28.62” long - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - $4,355
Mechanical Access Doors to Interior
A. Single door - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - $1,195
B. Double door - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - $1,580
C. Single louver door - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - $1,380
SG10Highlight Finish top edge of unit each unit
A. 36” minimum - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - $860
B. Each additional inch over 36” - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - $55
Add pricing off chart on next page to standard base pricing.
Price includes a top extension - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - SEE CHART ON NEXT PAGE
SG11Modify Standard Height Modify height of unit to height 28”, 30”, 32”, 34” & 36” (only) - - - - - - - - - - - - - - - - - - - - NO CHARGE
SG12Modify Standard Length (Shelleyglas only)
SG14
Modify Standard Top Depth
A. 1” to 6”
B. 7” to 12” SG15
SG16
SG17
-28
$550
$950
-36 -50 -60 -74-96
$550
$550
$910 $1,085$1,450
$950 $1,230 $1,535 $1,845$2,450
Paper Cup Dispenser Specify cup manufacturer and rim diameter - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -$665
Pizza Pan Insert - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - $555
Powder Coating - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Contact CSR
A. G Style counter protector - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - per inch $20
B. H Style counter protector - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - per inch $30
C. HD Style counter protector - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - per inch $40
D. I Style counter protector - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - per inch $55
E. KD Style sneeze guard - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - per inch $20
F. KS Style sneeze guard - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -per inch $20
G. Shelley canopy - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - per inch $30
Specifications and prices subject to change without notice.
55
Tel: 905-624-1419 • 888-442-7526
Fax: 905-624-1851 • 800-361-2724
For more information, visit www.garlandcanada.ca
SHELLEYSTEEL/SHELLEYGLAS SERVING LINE ACCESSORIES
SHELLEYSTEEL/SHELLEYGLAS EQUIPMENT ACCESSORIES
SHELLEYSTEEL/SHELLEYGLAS SERVING LINE ACCESSORIES
Special Modifications (available on all equipment except where noted)
SG18 Push/Pull Handles Stainless steel - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - $460
SG19
Heated Tops
A. 17.12” x 25.12” recessed 1" - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - $2,140
B. 20.12” x 26.26” recessed 1" - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - C. 25.12” x 35.25” recessed 1" - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - D. 17.12” x 25.12” flat heated - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E. 20.12” x 26.26” flat heated - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - F. 25.12” x 35.25” flat heated - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
$2,380
$4,260
$2,140
$2,380
$4,260
SG20
Refrigerated Understorage Only fits in 60” or longer units, single door
A. With 1/4 h.p. condensing unit - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - $6,705
B. Without condensing unit when added to self-contained KCSC or SCSC models - - - - - - - - - - - - - - - - - - - - - - - - - - $4,750
SG21
SG22
SG23
SG24
SG25
A. Soup Wells 10.5” diameter, with control panel - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - $1,450
B. Soup Wells 8.5” diameter, with control panel - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - $1,310
Slanted Overshelves
A. Single (per foot; 3’ minimum) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - $1,045
B. Double (per foot; 3’ minimum) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - $2,450
Toe Plates Stainless steel (3’ minimum) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Per linear foot or fraction $130
Tray Slides 12” wide laminated fold-down style (per foot; add to tray slide price) - - - - - - - - - - - - - - - - - - - - - - - - - - - - $395
Canopy and accessories
A. Dome style - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Per inch $75
B. Peak style - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Per inch $105
C. Bus style - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Per inch $65
D. Stationary frame - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - $1,360
E. Adjustable (tube in tube) frame - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - $2,545
F. 3” letters - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Each $65
G. 2” or 3” stripe on canopy - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Per inch $65
SG26
Bus theme, includes, wheels, lights, windshield wipers, striping, license plate, fenders and doors
only (does not include canopy, trim strips, lettering or over structure).
A. Single side only - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - $5,235
B. Dual sided bus - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - $6,810
SG27
Boat theme, includes smoke stack with smoke, bow piece, flag, anchor, bell, and name plate
(does not include waves, trim stripes or portholes).
A. Basic package single/dual - - - - - - - - - - - - - - - - - - - - - - - $6,930
B. Portholes - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Each $190
C. Wave kick plates - - - - - - - - - - - - - - - - - - - - - - - - - - - Per inch $55
SG28
Train/Circus Train theme, includes smoke stack, engine wheels with piston, cow catcher, cab
over shelf, bell, and headlight (does not include wheels for following cars, circus animals, canopy,
lettering).
A. Single side only - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - $9,410
B. Dual side train engine - - - - - - - - - - - - - - - - - - - - - - - - - - $11,010
C. Circus animals - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Each $555
D. Balloons, set of three in cluster - - - - - - - - - - - - - - - - - - - - - $215
E. Set of two wheels per side for following cars - - - - - - - - - - $270
Specifications and prices subject to change without notice.
56
Tel: 905-624-1419 • 888-442-7526
Fax: 905-624-1851 • 800-361-2724
For more information, visit www.garlandcanada.ca
SHELLEYSTEEL/SHELLEYGLAS EQUIPMENT ACCESSORIES
Special Modifications (available on all equipment except where noted)
SG29
Rocket theme, includes nose cone, graphics, and tail wing (does not include trim strips).
A. Single side only - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - $7,035
B. Dual sided rocket - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - $8,530
SG30
Standoff Decor Panel, 18”x18” Shelleyglas/Shelleysteel - - - - - - - - - Consult Factory
SG31
Standoff Decor Panel, Flexible size Shelleyglas/Shelleysteel/Concepts - - - - - - - - - - - - - - - - - - - - - - - - - - Consult Factory
TE
Top extensions (added to base as flat top area)
TE option should only be used for standard length units. Please contact the factory for custom length pricing.
TE8. 8” extension - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - $250
TE10. 10” extension - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - $470
TE14. 14” extension - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - $685
TE22. 22” extension - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - $960
TE24. 24” extension - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - $1,230
TE32. 32” extension - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - $1,745
TE36. 36” extension - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - $1,745
TE38. 38” extension - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - $1,865
Spacer Options
The spacer option (wainscot) includes top, interlocks and legs.
Please specify fiberglass, stainless steel or laminate when ordering.
KSPC. Fiberglass spacer - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - per linear inch $65
SSPC. Stainless steel spacer - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - per linear inch $55
LSPC. Laminate spacer - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - per linear inch $55
Power Pole Options
PP21-30. 120/208 volt, 3-phase, 30 amp pole - - - - - - - - - - - - - - - - - - - - per pole $480
PP14-50. Locking 120/208 volt, single-phase, 50 amp pole - - - - - - - - - - per pole $950
Specifications and prices subject to change without notice.
57
Tel: 905-624-1419 • 888-442-7526
Fax: 905-624-1851 • 800-361-2724
For more information, visit www.garlandcanada.ca
SHELLEYSTEEL/SHELLEYGLAS SERVING LINE ACCESSORIES
Delfield
Mobile Dispensing Equipment
™
®
CAB2- Mobile Enclosed Two Stack Dish Dispensers
CAB3- Mobile Enclosed Three Stack Dish Dispensers
CAB4- Mobile Enclosed Four Stack Dish Dispensers
CT- Mobile Cantilever Tray and Rack Dispensers
T/T2- Mobile Enclosed Tray and Rack Dispensers
TT/TT2- Mobile Open Frame Tray and Rack Dispensers
FT2-SN- Mobile Open Frame Tray and Rack Dispenser
SALD- Lettuce and Vegetable Spin Drier
DT/DTC/RCD/UTS/UTSP/CPS/SS/UC/UCE- Utility Carts
58
CAB2 - MOBILE ENCLOSED TWO STACK DISH DISPENSERS
Product Information
• High impact plastic guide posts mounted to
flange
QT/ET
• 9’ cord and plug supplied
• Convection heating module and fan motor
per dispenser
• Outer 22-gauge stainless steel jacket around
dispenser
• Air intake shall be filtered
• On/off switch on each dispenser
• Each dispenser to have an adjustable thermostat
• QT- each dispenser shall have a stainless steel
cover
• ET- Maintains temperatures between 120140°F (49-60°C)
• QT- Maintains temperatures between 150170°F (66-77°C)
• One year parts and 90 day labor standard
warranty. Additional warranties available,
see below
Specifications and Prices
MODEL
DISH
NEMA
SHIP FREIGHT CDN LIST
NUMBER
L
D H DIAMETER AMPSWATTSVOLTS PLUG WEIGHT CLASS PRICE
MOBILE ENCLOSED TWO-STACK DISH DISPENSERS
With unheated dispensers
CAB2-500
28.25”17”36” 3”-5” N/AN/AN/A N/A 125 100$2,435
CAB2-575 28.25”17”36” 5”-5.75” N/AN/AN/A N/A 125 100$2,535
28.25”17”36”5.75”-6.5” N/AN/AN/A N/A 127 100$2,660
CAB2-650 28.25”17”36”6.5”-7.25” N/AN/AN/A N/A 130 100$2,735
CAB2-725 CAB2-813
32.25”17”36”7.25”-8.12” N/AN/AN/A N/A 132 100$2,800
CAB2-913
32.25”17”36”8.12”-9.12” N/AN/AN/A N/A 135 100$2,955
32.25”17”36”9.12”-10.12” N/AN/AN/A N/A 142 100$3,065
CAB2-1013
CAB2-1200 37”19”36”10.13”-12” N/AN/AN/A N/A 160 100$3,435
42”21.5”
36”12”-14.5” N/AN/AN/A N/A 176 100$4,205
CAB2-1450
With Even Temp heated dispensers
CAB2-500ET
28.25”17” 36” 3”-5”
CAB2-575ET 28.25”17” 36” 5”-5.75”
CAB2-650ET 28.25”17” 36” 5.75”-6.5”
CAB2-725ET 28.25”17” 36” 6.5”-7.25”
32.25”17” 36” 7.25”-8.12”
CAB2-813ET
CAB2-913ET
32.25”17” 36” 8.12”-9.12”
CAB2-1013ET 32.25”17” 36”9.12”-10.12”
CAB2-1200ET 37” 19”36” 10.12”-12”
CAB2-1450ET
42” 21.5”36” 12”-14.5”
15.0 400
15.0 400
15.0 400
15.0 400
15.0 700
15.0 700
15.0 700
15.0 700
15.0 700
120 5-20P
120 5-20P
120 5-20P
120 5-20P
120 5-20P
120 5-20P
120 5-20P
120 5-20P
120 5-20P
144
146
148
152
160
168
171
192
201
125 $3,645
125 $3,730
125 $3,965
125 $4,095
125 $4,190
125 $4,325
125 $4,415
125$5,045
125 $5,435
With Quick Temp heated dispensers
CAB2-813QT 32.25”17” 36” 7.25”-8.12”
CAB2-913QT 32.25”17” 36” 8.12”-9.12”
CAB2-1013QT 32.25”17” 36”9.12”-10.12”
CAB2-1200QT 37” 19”36” 10.12”-12”
CAB2-1450QT 42” 21.5”36” 12”-14.5”
15.0 700
15.0 700
15.0 700
15.0 700
15.0 700
120 5-20P
120 5-20P
120 5-20P
120 5-20P
120 5-20P
161
166
169
186
201
125 $4,465
125 $4,510
125 $4,675
125$5,390
125 $5,830
CAB2
Laminate & Fiberglass Pricing
Chart
Must specify color selection on order.
MODEL
CAB2-500
CAB2-575
CAB2-650
CAB2-725
CAB2-813
CAB2-913
CAB2-1013
CAB2-1200
CAB2-1450
LAMINATEFIBERGLASS
PRICE
PANEL PRICE
$670$885
$670$885
$670$885
$670$885
$690$895
$690$895
$690$895
$690$920
$750$945
For a complete list of fiberglass colors,
contact Delfield or visit the website at
www.delfield.com.
Mobile Dispensing Equipment accessories and modifications can be found on page 67.
Specifications and prices subject to change without notice.
59
Tel: 905-624-1419 • 888-442-7526
Fax: 905-624-1851 • 800-361-2724
For more information, visit www.garlandcanada.ca
MOBILE DISPENSING EQUIPMENT
Cabinet
• Cabinet top to be 16-gauge stainless steel,
welded, polished and reinforced
• Outer body and corners to be 20-gauge
stainless steel
• Non-marring gray corner bumpers
• (4) 4.00” diameter polyolefin swivel casters
(all locking)
Dispensers
• Top flange and bottom brace to be 18-gauge
stainless steel
• Vertical side channels 22-gauge stainless
steel
• Flange, channels and bottom to be integrally
welded
• Spring supports to be 14-gauge stainless
steel
• Carrier head made of welded rods with a
removable 18-gauge top plate
• Self-leveling mechanism, field adjustable by
adding or removing springs
CAB3 - MOBILE ENCLOSED THREE STACK DISH DISPENSERS
Product Information
CAB3-575
MOBILE DISPENSING EQUIPMENT
With optional wrap-around bumpers
Laminate & Fiberglass Pricing
Chart
Must specify color selection on order.
MODEL
CAB2-500
CAB2-575
CAB2-650
CAB2-725
CAB2-813
CAB2-913
CAB2-1013
CAB2-1200
CAB2-1450
LAMINATEFIBERGLASS
PRICE
PANEL PRICE
$670$885
$670$885
$670$885
$670$885
$690$895
$690$895
$690$895
$690$920
$750$945
For a complete list of fiberglass colors,
contact Delfield or visit the website at
www.delfield.com.
Cabinet
• Cabinet top to be 16-gauge stainless steel,
welded, polished and reinforced
• Outer body and corners to be 20-gauge
stainless steel
• Non-marring gray corner bumpers
• (4) 4.00” diameter polyolefin swivel casters
(all locking)
Dispensers
• Top flange and bottom brace to be 18-gauge
stainless steel
• Vertical side channels 22-gauge stainless
steel
• Flange, channels and bottom to be integrally
welded
• Spring supports to be 14-gauge stainless
steel
• Carrier head made of welded rods with a
removable 18-gauge top plate
• Self-leveling mechanism, field adjustable by
adding or removing springs
• High impact plastic guide posts mounted
to flange
QT/ET
• 9’ cord and plug supplied
• Convection heating module and fan motor
per dispenser
• Outer 22-gauge stainless steel jacket around
dispenser
• Air intake shall be filtered
• On/off switch on each dispenser
• Each dispenser to have an adjustable thermostat
• QT- Each dispenser shall have a stainless steel
cover
• ET- Maintains temperatures between 120140°F (49-60°C)
• QT- Maintains temperatures between 150170°F (66-77°C)
• One year parts and 90 day labor standard
warranty. Additional warranties available,
see below
Specifications and Prices
MODEL
DISH
NUMBER
L
D H DIAMETER AMPSWATTSVOLTS
MOBILE ENCLOSED THREE-STACK DISH DISPENSERS
With unheated dispensers
CAB3-500
41.25”17” 36” 3”-5” N/A N/A N/A
41.25”17” 36” 5”-5.75” N/A N/A N/A
CAB3-575 CAB3-650 41.25”17” 36” 5.75”-6.5” N/A N/A N/A
CAB3-725 41.25”17” 36” 6.5”-7.25” N/A N/A N/A
47.25”17” 36” 7.25”-8.12” N/A N/A N/A
CAB3-813
CAB3-913
47.25”17” 36” 8.12”-9.12” N/A N/A N/A
47.25”17” 36”9.12”-10.12” N/A N/A N/A
CAB3-1013
CAB3-1200 53.25”19” 36” 10.12”-12” N/A N/A N/A
CAB3-1450
62” 21.5”36” 12”-14.5” N/A N/A N/A
NEMA
SHIP
FREIGHT CDN LIST
PLUG WEIGHT CLASS PRICE
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
173
176
177
179
190
193
196
212
229
100 $3,125
100 $3,230
100 $3,575
100 $3,720
100 $3,920
100 $4,040
100 $4,130
100 $4,950
100 $5,530
With Even Temp heated dispensers
CAB3-500ET
41.25”17” 36” 3”-5” 13.0 400 208 6-20P 207
125 $4,855
CAB3-575ET 41.25”17” 36” 5”-5.75” 13.0 400 208 6-20P 210
125 $4,940
CAB3-650ET 41.25”17” 36” 5.75”-6.5” 13.0 400 208 6-20P 213
125 $5,455
CAB3-725ET 41.25”17” 36” 6.5”-7.25” 13.0 400 208 6-20P 219
125 $5,480
CAB3-813ET
47.25”17” 36” 7.25”-8.12” 13.0 700 208 6-20P 233
125 $5,685
CAB3-913ET
47.25”17” 36” 8.12”-9.12” 13.0 700 208 6-20P 239
125 $5,875
CAB3-1013ET 47.25”17” 36”9.12”-10.12” 13.0 700 208 6-20P 245
125 $6,025
CAB3-1200ET 53.25”19” 36” 10.12”-12” 13.0 700 208 6-20P 262
125 $6,880
CAB3-1450ET62”
21.5”
36”
12”-14.5”
13.0
700
208
6-20P277125
$7,320
With Quick Temp heated dispensers
CAB3-813QT 47.25”17” 36” 7.25”-8.12” 13.0 700
CAB3-913QT 47.25”17” 36” 8.12”-9.12” 13.0 700
CAB3-1013QT 47.25”17” 36”9.12”-10.12” 13.0 700
CAB3-1200QT 53.25”19” 36” 10.12”-12” 13.0 700
CAB3-1450QT 62” 21.5”36” 12”-14.5” 13.0 700
208
208
208
208
208
6-20P
6-20P
6-20P
6-20P
6-20P
243
249
255
272
287
125 $6,195
125 $6,565
125 $7,025
125 $7,430
125 $7,795
Mobile Dispensing Equipment accessories and modifications can be found on page 67.
Specifications and prices subject to change without notice.
60
Tel: 905-624-1419 • 888-442-7526
Fax: 905-624-1851 • 800-361-2724
For more information, visit www.garlandcanada.ca
CAB4 - MOBILE ENCLOSED FOUR STACK DISH DISPENSERS
Product Information
QT/ET
• 9’ cord and plug supplied
• Convection heating module and fan motor
per dispenser
• Outer 22-gauge stainless steel jacket around
dispenser
• Air intake shall be filtered
• On/off switch on each dispenser
• Each dispenser to have an adjustable thermostat
• QT- Each dispenser shall have a stainless steel
cover
• ET- Maintains temperatures between 120140°F (49-60°C)
• QT- Maintains temperatures between 150170°F (66-77°C)
• One year parts and 90 day labor standard
warranty. Additional warranties available,
see below
Specifications and Prices
MODEL
DISH
NEMA SHIP
FREIGHT CDN LIST
NUMBER
L
D
H
DIAMETER AMPS WATTS VOLTS
PLUG WEIGHT
CLASS PRICE
MOBILE ENCLOSED FOUR-STACK DISH DISPENSERS
With unheated dispensers
27”
27” 36” 3”-5” N/A N/A N/A N/A181 100
$4,050
CAB4-500
CAB4-575 27”
27” 36” 5”-5.75” N/A N/A N/A N/A185 100
$4,260
CAB4-650 27”
27” 36” 5.75”-6.5”N/A N/A N/A N/A186 100
$4,415
27”
27” 36” 6.5”-7.25”N/A N/A N/A N/A189 100
$4,525
CAB4-725 CAB4-813
32.25” 32.25”36” 7.25”-8.12” N/A N/A N/A N/A 213 100$4,985
32.25” 32.25”36” 8.12”-9.12” N/A N/A N/A N/A 217 100$5,355
CAB4-913
CAB4-1013 32.25” 32.25”36” 9.12”-10.12”N/A N/A N/A N/A 221 100$5,590
CAB4-1200 36”
36” 36” 10.12”-12”N/A N/A N/A N/A240 100
$6,540
42”
42” 36” 12”-14.5” N/A N/A N/A N/A263 100
$8,420
CAB4-1450
With Even Temp heated dispensers
CAB4-500ET
27”
27” 36” 3”-5” 17.0
CAB4-575ET 27”
27” 36” 5”-5.75” 17.0
CAB4-650ET 27”
27” 36” 5.75”-6.5” 17.0
CAB4-725ET 27”
27” 36” 6.5”-7.25” 17.0
CAB4-813ET 32.25” 32.25”36” 7.25”-8.12”17.0
CAB4-913ET 32.25” 32.25”36” 8.12”-9.12”17.0
CAB4-1013ET 32.25” 32.25” 36” 9.12”-10.12”17.0
CAB4-1200ET 36”
36” 36” 10.12”-12” 17.0
42” 36” 12”-14.5” 17.0
CAB4-1450ET 42”
400
400
400
400
700
700
700
700
700
208
208
208
208
208
208
208
208
208
6-20P226
6-20P230
6-20P234
6-20P242
6-20P270
6-20P278
6-20P 286
6-20P313
6-20P337
125$6,125
125$6,410
125$6,775
125$7,035
125$7,500
125$7,760
125$8,080
125$8,935
125$9,420
With Quick Temp heated dispensers
CAB4-813QT 32.25” 32.25”36”
CAB4-913QT 32.25” 32.25”36”
CAB4-1013QT 32.25” 32.25”36”
CAB4-1200QT 36”
36” 36”
CAB4-1450QT 42”
42” 36”
700
700
700
700
700
208
208
208
208
208
6-20P290
6-20P298
6-20P306
6-20P333
6-20P351
125$8,070
125$8,340
125$8,650
125$9,515
125
$10,025
7.25”-8.12”17.0
8.12”-9.12”17.0
9.12”-10.1”17.0
10.12”-12” 17.0
12”-14.5” 17.0
CAB4-813
Laminate & Fiberglass Pricing
Chart
Must specify color selection on order.
MODEL
CAB2-500
CAB2-575
CAB2-650
CAB2-725
CAB2-813
CAB2-913
CAB2-1013
CAB2-1200
CAB2-1450
LAMINATEFIBERGLASS
PRICE
PANEL PRICE
$670$885
$670$885
$670$885
$670$885
$690$895
$690$895
$690$895
$690$920
$750$945
For a complete list of fiberglass colors,
contact Delfield or visit the website at
www.delfield.com.
Mobile Dispensing Equipment accessories and modifications can be found on page 67.
Specifications and prices subject to change without notice.
61
Tel: 905-624-1419 • 888-442-7526
Fax: 905-624-1851 • 800-361-2724
For more information, visit www.garlandcanada.ca
MOBILE DISPENSING EQUIPMENT
Cabinet
• Cabinet top to be 16-gauge stainless steel,
welded, polished and reinforced
• Outer body and corners to be 20-gauge
stainless steel
• Non-marring gray corner bumpers
• (4) 4.00” diameter polyolefin swivel casters
(all locking)
Dispensers
• Top flange and bottom brace to be 18-gauge
stainless steel
• Vertical side channels 22-gauge stainless
steel
• Flange, channels and bottom to be integrally
welded
• Spring supports to be 14-gauge stainless
steel
• Carrier head made of welded rods with a
removable 18-gauge top plate
• Self-leveling mechanism, field adjustable by
adding or removing springs
• High impact plastic guide posts mounted
to flange
CT - MOBILE CANTILEVER TRAY AND RACK DISPENSERS
Product Information
MOBILE DISPENSING EQUIPMENT
CT-1826
• Elevating mechanism cabinet to be
14-gauge stainless steel
• Base to be 14-gauge stainless steel,
reinforced with 14-gauge stainless steel
support channels
• (4) 4.00” diameter polyolefin swivel casters
(all locking)
• Non-marring gray corner bumpers
• Dispenser platform carrier to be 16-gauge
stainless steel and mounted on two stainless
steel cantilever arms
• Self-leveling mechanisms shall be adjustable
by adding or removing stainless steel
extension springs located behind removable
panel
• One year parts and 90 day labor standard
warranty. Additional warranties available,
see below
Specifications and Prices
MODEL NUMBER L
D
H
MOBILE CANTILEVER TRAY AND RACK DISPENSERS
13”
22”
13”
27.88”
15”
27.88”
15”
27.88”
17.25”
27.88”
21”
31.75”
21”
27.88”
CT-1216
CT-1221
CT-1418
CT-1422
CT-1622
CT-1826
CT-2020
37”
37”
37”
37”
37”
37”
37”
MAXIMUM
TRAY SIZE
SHIP
WEIGHT
FREIGHT
CLASS
CDN LIST
PRICE
12” x 16”
12” x 21”
14” x 18”
14” x 22”
16” x 22”
18” x 26”
20” x 21”
106
132
145
145
159
165
168
100
100
100
100
100
100
100
$3,125
$3,150
$3,185
$3,215
$3,290
$3,490
$3,490
Mobile Dispensing Equipment accessories and modifications can be found on page 67.
Specifications and prices subject to change without notice.
62
Tel: 905-624-1419 • 888-442-7526
Fax: 905-624-1851 • 800-361-2724
For more information, visit www.garlandcanada.ca
T AND T2 - MOBILE ENCLOSED TRAY AND RACK DISPENSERS
Product Information
T/T2-H SERIES ONLY
• Heated dispenser has a stainless steel liner
and 2.00” of fiberglass insulation
• On/off switch and 9’ cord and plug standard
• Dispenser is heated with convection heated
modules
• Air intake is standard with filter
• Adjustable thermostat
• Temperatures between 150-170° F. (66-77°C)
• One year parts and 90 day labor standard
warranty. Additional warranties available,
see below
interior view of
T-1418
Specifications and Prices
MODEL DIMENSIONS
MAXIMUM
L
D
H
TRAY SIZE
AMP
VOLTS
NUMBER MOBILE ENCLOSED TRAY AND RACK DISPENSERS
T-1014
23.12”
16.75”
36” 10” x 15”
N/A
N/A
T-1216
22.75”
20.12”
36” 12” x 16”
N/A
N/A
27.75”
20.12”
36” 12” x 21”
7.0
N/A
T-1221
T-1418
24.75”
22.12”
36” 14” x 18”
7.0
N/A
28.75”
22.12”
36” 14” x 22”
7.0
N/A
T-1422
T-1622
28.75”
24.12”
36” 16” x 22”
N/A
N/A
T-1826
32.75”
26.12”
36” 18” x 26”
14.0
N/A
27.75”
28.12”
36” 20” x 21”
14.0
N/A
T-2020
TWO STACK, MOBILE ENCLOSED TRAY AND RACK DISPENSERS
T2-1014
27.75”
22.12”
36” 10” x 15”
N/A
N/A
32.75”
24.12”
36” 12” x 16”
N/A
N/A
T2-1216
T2-1221
32.75”
29.12”
36” 12” x 21”
7.0
N/A
HEATED MOBILE ENCLOSED TRAY AND RACK DISPENSERS
T-1221H
27.75”
20.12”
36” 12” x 21”
7.0
120
24.75”
22.12”
36” 14” x 18”
7.0
120
T-1418H
T-1422H
28.75”
22.12”
36” 14” x 22”
7.0
120
32.75”
26.12”
36” 18” x 26”
14.0
120
T-1826H
T-2020H
27.75”
28.12”
36” 20” x 21”
14.0
120
TWO STACK, HEATED MOBILE ENCLOSED TRAY AND RACK DISPENSERS
32.75”
29.12”
36” 12” x 21”
7.0
120
T2-1221H
T-1418
NEMA
PLUG
SHIP
WEIGHT
FREIGHT
CLASS
CDN LIST
PRICE
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
150
153
162
153
162
177
210
175
100
100
100
100
100
100
100
100
$4,040
$4,040
$4,050
$4,050
$4,050
$4,070
$4,345
$4,120
N/A
N/A
N/A
177
177
185
100
100
100
$4,435
$4,435
$4,435
5-15P
5-15P
5-20P
5-20P
5-20P
127
155
155
195
185
125
125
125
125
125
$6,005
$6,345
$6,585
$6,705
$6,345
5-20P
185
125
$6,705
Laminate & Fiberglass Pricing
Chart
Must specify color selection on order.
MODEL
T-1014
T-1216
T-1221
T-1418
T-1422
T-1622
T-1826
T-2020
all T2’s
all T-H’s
LAMINATE
PRICE
FIBERGLASS
PANEL PRICE
$675$885
$675$885
$675$885
$675$885
$720$930
$720$930
$720$930
$720$930
$740$960
$720$820
For a complete list of fiberglass colors,
contact Delfield or visit the website
at www.delfield.com.
Mobile Dispensing Equipment accessories and modifications can be found on page 67.
Specifications and prices subject to change without notice.
63
Tel: 905-624-1419 • 888-442-7526
Fax: 905-624-1851 • 800-361-2724
For more information, visit www.garlandcanada.ca
MOBILE DISPENSING EQUIPMENT
T SERIES ONLY
• Cabinet top to be 16-gauge stainless steel,
welded, polished and reinforced
• Cabinet sides to be 20-gauge stainless steel
• Cabinet bottom to be 14-gauge galvanized
steel
• (4) 4.00” polyolefin swivel casters (all locking)
• Dispenser platform carrier shall be 18-gauge
stainless steel and removable for cleaning
• Non-marking corner gray bumpers
• Self-leveling mechanisms shall be adjustable
by adding and removing stainless steel
extension springs located inside the elevator
housing
• One year parts and 90 day labor standard
warranty. Additional warranties available,
see below
TT AND TT2 - MOBILE OPEN FRAME TRAY AND RACK DISPENSERS
Product Information
MOBILE DISPENSING EQUIPMENT
TT-1422
• Tubing and base to be 16-gauge stainless steel
• Tubing and base to be integrally welded
• Base to be reinforced with 14-gauge stainless
steel angles
• Non-marring gray corner bumpers
• (4) 4.00” diameter polyolefin swivel casters (all
locking)
• Dispenser platform carrier shall be 18-gauge
stainless steel
• Self-leveling mechanisms shall be adjustable by
adding and removing stainless steel extension
springs located inside the elevator housing
• Each dispenser section holds 50-60 trays (varies
per tray)
• One year parts and 90 day labor standard
warranty. Additional warranties available,
see below
Specifications and Prices
TT2-1418
MODEL DIMENSIONS
NUMBER L
D
H
MOBILE OPEN FRAME TRAY AND RACK DISPENSERS
21.25”
15.25”
37.75”
TT-1014
TT-1216
18.25”
20.75”
37.75”
18.25”
25.75”
37.75”
TT-1221
TT-1418
20.25”
22.75”
37.75”
TT-1422
20.25”
26.75”
37.75”
22.25”
26.75”
37.75”
TT-1622
24.25”
30.75”
37.75”
TT-1826
TT-2020
26.25”
25.75”
37.75”
TWO STACK, MOBILE OPEN FRAME TRAY AND RACK DISPENSERS
21.25”
26.75”
37.75”
TT2-1014
36.5”
20.75”
37.75”
TT2-1216
TT2-1221
36.5”
25.75”
37.75”
TT2-1418
40.5”
22.75”
37.75”
40.5”
26.75”
37.75”
TT2-1422
TT2-1622
44.5”
26.75”
37.75”
48.5”
30.75”
37.75”
TT2-1826
52.5”
25.75”
37.75”
TT2-2020
MAXIMUM
TRAY SIZE
SHIP
WEIGHT
FREIGHT
CLASS
CDN LIST
PRICE
11” x 15”
12” x 16”
12” x 21”
14” x 18”
14” x 22”
16” x 22”
18” x 26”
20” x 21”
102
102
105
102
105
106
111
111
100
100
100
100
100
100
100
100
$2,570
$2,660
$2,710
$2,710
$2,710
$2,790
$2,830
$2,830
11” x 15”
12” x 16”
12” x 21”
14” x 18”
14” x 22”
16” x 22”
18” x 26”
20” x 21”
113
165
163
165
163
170
179
179
100
100
100
100
100
100
100
100
$3,100
$3,525
$3,730
$3,730
$3,730
$3,920
$4,120
$4,120
Mobile Dispensing Equipment accessories and modifications can be found on page 67.
Specifications and prices subject to change without notice.
64
Tel: 905-624-1419 • 888-442-7526
Fax: 905-624-1851 • 800-361-2724
For more information, visit www.garlandcanada.ca
FT2-SN - MOBILE OPEN FRAME TRAY AND RACK DISPENSER
SALD-1 - LETTUCE AND VEGETABLE SPIN DRIER
Product Information
SALD-1/ SALD-2 SERIES ONLY
• Body is 18-gauge stainless steel
• Legs are 1” diameter 16-gauge stainless steel
tubing
• (3) 4.00” diameter polyolefin locking stem casters
• Outer lid is 18-gauge stainless steel
• Inner liner is perforated durable polyethylene
plastic
• Water-tight motor and controls are mounted on
the bottom of the unit
• 6’ cord and plug supplied
• Unit has 1.50” drain
• Adjustable ON/OFF timer for drying times up to 5
minutes
• Lid and cover storing hooks come standard
• SALD-1 & SALD-2 can not be shipped via UPS
FT2-SN-1418
SALD-1
Specifications and Prices
MODEL DIMENSIONS
MAXIMUM
SHIP
NUMBER L
D
H
TRAY SIZE
WEIGHT
TWO STACK, MOBILE OPEN FRAME TRAY AND RACK DISPENSERS with silverware bin and napkin dispensers
Fiberglass, Specify Color
FT2-SN-1216
43.75”
22.12”
56.38”
12” x 16”
284
FT2-SN-1418
47.75”
22.12”
56.38”
14” x 18”
298
51.75”
22.12”
56.38”
16” x 22”
306
FT2-SN-1622
TWO STACK, MOBILE OPEN FRAME TRAY AND RACK DISPENSERS with silverware bin and napkin dispensers
Stainless Steel
FT2-SN-1216SS
43.75”
22.12”
56.38”
12” x 16”
284
FT2-SN-1418SS
47.75”
22.12”
56.38”
14” x 18”
298
FT2-SN-1622SS
51.75”
22.12”
56.38”
16” x 22”
306
MODEL NUMBER L
D
H
INNER LINER
CAPACITY
SALAD ACE LETTUCE AND VEGETABLE SPIN DRIER
SALD-1
27” 27” 32.5”
20 gal.
SALD-2
27” 27” 32.5”
20 gal.
INNER DIAMETER
15.62”
15.62”
FREIGHT
CLASS
CDN LIST
PRICE
100
100
100
$6,880
$6,880
$6,880
100
100
100
$6,565
$6,565
$6,880
LINER
DEPTH
AMPS
VOLTS
NEMA
PLUG
SHIP
WEIGHT
16.87”
16.87”
5-15P
5-15P
70
70
2.7
1.35
115
230
FREIGHT CDN LIST
CLASS
PRICE
85
85
$3,835
$4,190
Mobile Dispensing Equipment accessories and modifications can be found on page 67.
Specifications and prices subject to change without notice.
65
Tel: 905-624-1419 • 888-442-7526
Fax: 905-624-1851 • 800-361-2724
For more information, visit www.garlandcanada.ca
MOBILE DISPENSING EQUIPMENT
FT2-SN SERIES ONLY
• Tubing and base is 16-gauge stainless steel
• Tubing and base is integrally welded
• Base to be reinforced with 14-gauge stainless
steel angles
• Center housing to be two-piece molded
fiberglass
• Center housing top to be 16-gauge stainless
steel, which houses two napkin dispensers
• Silverware bin to have (10) holes and made of
stainless steel
• Plastic silverware cylinders provided standard
• Non-marring gray corner bumpers
• (4) 4.00” diameter polyolefin swivel casters (all
locking)
• Dispenser platform carrier shall be 18-gauge
stainless steel
• Self-leveling mechanisms shall be adjustable by
adding and removing stainless steel extension
springs located inside the elevator housing
UTS, UTSP, UC AND UCE - UTILITY CARTS
Product Information
MOBILE DISPENSING EQUIPMENT
UTS-1
UC-3
UTS SERIES ONLY
• Silverware bin to have (10) holes made of
stainless steel
• Plastic silverware cylinders provided standard
UTSP SERIES ONLY
• Silverware bin to accommodate ¼ size pans
(provided) made of stainless steel
• UTSP-1 holds (4) pans and UTSP-2 holds (8) pans
ALL UNITS
• Tray shelves to be one piece molded fiberglass
• Tray shelves to be 14-gauge stainless steel on SS
models only
• (4) 4.00” diameter polyolefin swivel casters (all
locking)
• Non-marring vinyl sleeve bumper at each corner
• Vertical upper 1.00” diameter 16-gauge tubing
frame and tubing bottom to be integrally welded
• One year parts and 90 day labor standard warranty.
Additional warranties available, see below
Specifications and Prices
MODEL DIMENSIONS
SHIP
FREIGHT
CDN LIST
NUMBER L
D
H
WEIGHT
CLASS
PRICE
TRAY AND SILVERWARE CARTS AND STARTER OVERSHELVES
UTS-1
35.25”23.37”46.69” 120 100
$2,330
UTS-1SS
35.25”23.37”46.69” 125 100
$2,220
35.25”23.37”46.69” 125 100
$2,570
UTSP-1
UTSP-1SS
35.25”23.37”46.69” 130 100
$2,580
UTSP-2
35.25”23.37”46.69” 140 100
$3,385
35.25”23.37”60.62” 145 100
$3,335
UTSP-2SS
UTILITY CARTS
UC-2
UC-2SS
UC-3
UC-3SS
UCE-1727SS
35.25”23.37”35.75”
35.25”23.37”35.75”
35.25”23.37”35.75”
35.25”23.37”35.75”
25.25”17”35.75”
115
125
125
135
110
100
$2,010
100
$1,560
100
$2,480
100
$1,925
100
$1,595
Mobile Dispensing Equipment accessories and modifications can be found on page 67.
Specifications and prices subject to change without notice.
66
Tel: 905-624-1419 • 888-442-7526
Fax: 905-624-1851 • 800-361-2724
For more information, visit www.garlandcanada.ca
MOBILE DISPENSING EQUIPMENT ACCESSORIES
T AND T2 SERIES
12” diameter stainless steel dish dispenser tray
(-1200 and -1450 models only)----------------------------------------------------------------------$75
Non-marring rods for oval dishes and diameter adjustment
(-813 through -1450 only) per dispenser installation reduces
dispenser diameter by 1.25"----------------------------------------------------------------------- $395
Stainless steel tube cover
(-500 thru -725-ET and non-heated models)------------------------------------------------------ $350
Stainless steel dome cover
(-813 through -1450 models only; standard on QT models; each)-------------------------------- $460
Hold-down rod for dispenser tubes----------------------------------------------------------------- $115
Wrap-around bumpers
(-500 through -1200 only; adds 1.75” to length and depth)-------------------------------------- $405
Wrap-around bumpers (-1450 only; adds 1.75” to length and depth)----------------------------- $520
Four 4” diameter polyurethane casters
(four locking) in lieu of standard casters----------------------------------------------------------- $505
Four 5” diameter polyurethane casters
(four locking) in lieu of standard casters----------------------------------------------------------- $590
Flange-mount feet in lieu of standard casters------------------------------------------------------ $250
CAB2-220 volt, 50/60 cycle, single phase electrical connections----------------------------------- $280
CAB3-220 volt, 50/60 cycle, single phase electrical connections----------------------------------- $375
CAB4-220 volt, 50/60 cycle, single phase electrical connections----------------------------------- $460
Shorten dispenser tubes to special length------------------------------------------------------ add 10%
Wrap-around bumpers (adds 1.75” to length and depth)------------------------------------------ $395
Flange-mount feet in lieu of standard polyolefin casters------------------------------------------ $250
Four 4” diameter heavy duty polyurethane casters------------------------------------------------- $505
Four 5” diameter heavy duty polyurethane casters------------------------------------------------- $590
One pair napkin dispensers-------------------------------------------------------------------------- $325
Six (6) hole silverware bin--------------------------------------------------------------------------- $650
Eight (8) hole silverware bin------------------------------------------------------------------------ $880
Ten (10) hole silverware bin----------------------------------------------------------------------- $1,005
Additional plastic silverware cylinder (each)---------------------------------------------------------$65
Additional stainless steel silverware cylinder (each)----------------------------------------------- $105
Stainless steel silverware cylinder in lieu of standard
plastic cylinder (each)---------------------------------------------------------------------------------$75
220 volt, 50/60 cycle, single phase
electrical connections (T2 models only)----------------------------------------------------------- $395
Special heights----------------------------------------------------------------------------------- add 10%
Stainless steel dust cover---------------------------------------------------------------------------- $420
FT2-SN
Flange-mount feet in lieu of standard polyolefin casters------------------------------------------ $250
Four 4” diameter heavy duty polyurethane casters------------------------------------------------- $505
Four 5” diameter heavy duty polyurethane casters------------------------------------------------- $590
Additional plastic silverware cylinder-----------------------------------------------------------------$65
Additional stainless steel silverware cylinder ------------------------------------------------------ $105
Stainless steel silverware cylinder in lieu of standard plastic cylinder-------------------------------$75
Special heights----------------------------------------------------------------------------------- add 10%
CT SERIES
Wrap-around bumpers for CT models (adds 1.75” to length and depth)-------------------------- $395
Flange-mount feet in lieu of standard polyolefin casters (CT models)----------------------------- $250
Four 4” diameter heavy duty polyurethane casters (CT models)----------------------------------- $505
Four 5” diameter heavy duty polyurethane casters (CT models)----------------------------------- $590
One pair napkin dispensers (CT models)------------------------------------------------------------ $325
Six (6) hole silverware bins (CT models)------------------------------------------------------------ $650
Eight (8) hole silverware bins (CT models)---------------------------------------------------------- $880
Ten (10) hole silverware bin----------------------------------------------------------------------- $1,005
Stainless steel silverware cylinder in lieu of standard plastic cylinder;
CT models; (each)--------------------------------------------------------------------------------------$75
Additional plastic silverware cylinder; CT models; (each)--------------------------------------------$65
Additional stainless steel silverware cylinder; CT models; (each)---------------------------------- $105
Push handles (CT models)--------------------------------------------------------------------------- $420
Special heights (CT models)--------------------------------------------------------------------- add 10%
SALD MODELS
Extra polyurethane liner and inner lid (for SALD-1)------------------------------------------------ $270
UTS, UTSP, CPS, SS, UC AND UCE
Four 4” diameter heavy duty polyurethane casters
with corner bumpers------------------------------------------------------------------------------- $505
Four 5” diameter heavy duty polyurethane casters
with corner bumpers------------------------------------------------------------------------------- $590
Rolling bumpers (adds 2.5” to length & depth)----------------------------------------------------- $155
One pair napkin dispensers (UTS & UTS-SS only)--------------------------------------------------- $325
Additional plastic silverware cylinder (UTS & UTS-SS only)(6230022)-------------------------------$65
Additional stainless steel silverware cylinder
(UTS & UTS-SS only)(3234052)--------------------------------------------------------------------- $105
Stainless steel silverware cylinder in lieu of standard plastic cylinder
(UTS & UTS-SS only)----------------------------------------------------------------------------------$75
12” x 20” x 2.5” deep stainless steel pans (CPS & SS only; each)----------------------------------- $200
Six (6) hole silverware bin--------------------------------------------------------------------------- $650
Eight (8) hole silverware bin------------------------------------------------------------------------ $880
Ten (10) hole silverware bin----------------------------------------------------------------------- $1,005
Specifications and prices subject to change without notice.
67
Tel: 905-624-1419 • 888-442-7526
Fax: 905-624-1851 • 800-361-2724
For more information, visit www.garlandcanada.ca
MOBILE DISPENSING EQUIPMENT
CAB2, CAB3, AND CAB4 SERIES
Delfield
Mark 7 Component Crafted Equipment
™
®
Chef’s Counters
Serving Systems
Engineered Products
Infinite possibilities.
VOTED BEST
IN CLASS
CHEF’S
COUNTERS!
68
#
1
What is Delfield Mark 7 Component
?
Crafted Equipment?
Custom Fabrication With Standard Components
equipment, such as utility storage, hot food table or glass rack cabinets, similar
components are used. This holds true with freezers, refrigerators, prep tables, salad
CHEF’S COUNTERS
tables and so on. What Delfield has mastered is developing standard components that
are consistent from job to job, year to year and month to month. What does this do for
you? For one, the ability to purchase equipment that can be installed anywhere in the
country and be assured it’s the same each and every time. In addition, serviceability is
increased due to common parts and labor is saved due to service technician’s familiarity
with the equipment. By developing common components in custom equipment Delfield
is able to provide consistent pricing, no matter what time of year or how busy we
happen to be.
Using the component crafted custom fabrication approach allows you to develop
thousands of different equipment configurations while maintaining consistency
throughout the equipment. Don’t think for a minute this technique takes away from
the quality of the equipment. It’s quite the opposite, Delfield’s ability to produce
commonality in our equipment is a great value in many ways to our customer.
Delfield allows many of these components to be modified but remain similar in
construction. This is the advantage of using Delfield over local custom fabrication. Our
SERVING SYSTEMS
solid modeling capabilities, automated part demand flow, leading edge break presses,
lasers and punches all give Delfield customers consistent precise products versus
antiquated pencil marked, hand braked parts.
Specifications and prices subject to change without notice.
69
Tel: 905-624-1419 • 888-442-7526
Fax: 905-624-1851 • 800-361-2724
For more information, visit www.garlandcanada.ca
MARK 7 COMPONENT CRAFTED CUSTOM EQUIPMENT
D
elfield brings a different approach to custom fabrication. With any piece of
DELFIELD MARK 7 COMPONENT CRAFTED EQUIPMENT
GENERAL
• HFC-404A refrigerant
• All units can be provided with optional
14-gauge stainless steel tops.
• Special electrical requirements available on all units
• All refrigerators can be supplied remote or self contained
13 SERIES
ICE CREAM CABINETS
13 SERIES
ICE CREAM CABINETS
• Standard 16-gauge tops
• 32” to 72” length
• With or without syrup rail
• Special rail lengths available
• Sinks and dipperwells available
• Lid locks available
• Lexan covers available
• Draft arms available
•Drains
14 SERIES
HOT FOOD TABLES
14 SERIES
HOT FOOD TABLES
• Standard 16-gauge tops
• Electric or gas
• Individually controlled or single tank
water bath
• Standard with drains and manifold
• Optional cutting board
• Optional auto fill
• Optional LP gas regulator
• Available in any length
15 SERIES
DISPLAY CASES
15 SERIES
DISPLAY CASES
• Standard 16-gauge tops
• 24” or 30” deep under display section
• Mirror back, single service display with
a see through display section with glass
doors on both sides.
• Available in 4’ and 6’ lengths
• Optional locks
• Optional additional shelves
• Optional mirrored interior doors
16 SERIES
UTILITY STANDS
16 SERIES
UTILITY STANDS
•
•
•
•
•
•
•
•
•
Standard 16-gauge tops
Open shelf
Dry drawer
Hinged door
Sliding door
Available in any length
Optional door/drawer locks
Optional urn trough
10 year drawer warranty
17 SERIES
EQUIPMENT STANDS
17 SERIES
EQUIPMENT STANDS
MARK 7 COMPONENT CRAFTED EQUIPMENT
Start building your dream counter now! All of these units can be combined under one continuous top
(up to 168” long) Each unit can be quickly splined together or field welded, for seamless appearance.
•
•
•
•
•
•
•
•
•
Specifications and prices subject to change without notice.
70
Standard 18-gauge tops
Standard maple cutting board
Open shelf
Dry drawer
Refrigerated & freezer storage
Optional doors
Door/drawer locks
Freezers from 32” to 96”
Refrigerators from 36” to 110”
• Available for bottom mounted
ventilation
• Full height sides and back for quick
assembly into full equipment lineup
• Feature Delfield’s exclusive Full Extension Plus Drawer System
Tel: 905-624-1419 • 888-442-7526
Fax: 905-624-1851 • 800-361-2724
For more information, visit www.garlandcanada.ca
DELFIELD MARK 7 COMPONENT CRAFTED EQUIPMENT
GENERAL
• HFC-404A refrigerant
• All units can be provided with optional
14-gauge stainless steel tops
• Special electrical requirements available on all units
• All refrigerators can be supplied remote or self-contained
18 SERIES
WORK TABLES
18 SERIES
WORK TABLES
18 SERIES
SALAD & MEGA TOP
18 SERIES
SALAD AND MEGA TOP
18 SERIES PIZZA PREP & SANDWICH TABLES
• Available from 36” to 132” with (4)
base fronts
• Optional pans and adapter bars
• Number of pans to suit any need; 6 to
26 on salad tops and up to 42 on mega
tops
• Optional cover styles.
18 SERIES - PIZZA PREP AND
SANDWICH TABLES
• Available from 36” to 132” with (4)
base fronts
• Optional cutting boards
• Optional 2 high and 3 high drawers
• Optional locks available
• Drain and gate valve available
• Optional pans and adapter bars
• Optional tray racks
20, 21, 22 SERIES
ADD ON UNITS
20, 21, 22, SERIES
TOP EXTENSIONS AND ADD ON
UNITS
• Available in any length and size
• Top extensions
• Dish rack and dispensers
• Food warmers
• Tilt out waste bins
• Hinged door waste bin
• Syrup tank storage cabinet
• Oval tray storage
• Build these units into any common top
to come up with your desired length
Finish your line off with any of the 357 options. Overshelves, finished backs and ends, tray slides, heat lamps, and outlets are
all available to dress your counter. Make your vision a reality with Delfield Custom! Contact us at 888-442-7526 for a custom
quote or pricing.
Specifications and prices subject to change without notice.
71
Tel: 905-624-1419 • 888-442-7526
Fax: 905-624-1851 • 800-361-2724
For more information, visit www.garlandcanada.ca
MARK 7 COMPONENT CRAFTED EQUIPMENT
• Standard 16-gauge tops
• Refrigerated or freezer models available
• Optional 2 high and 3 high drawers
• Available up to 126” with four door/
drawer fronts
• Optional tray racks
INDEX BY EQUIPMENT TYPE
An introduction to each product line precedes its pricing section.
Accessories
Concepts...............................................................................16-17
Mobile Dispensing Equipment........................................... 67
Serving Lines..........................................................27-30, 49-57
Cashier Stands....................................................................25, 39, 48
Concepts™.......................................................................................5-15
Dish Dispensers
Mobile Enclosed Frame................................................... 59-61
FlexiShield Food Shields...................................................... 18-21
LIMITED WARRANT Y FOR COMMERCIAL PRODUC TS
Heated Units
Counters.................................................... 22-23, 31, 33, 40, 42
Mobile Heated Serving Counters..........................23, 31, 40
Mobile Combo Hot/Cold Serving Counter.............. 33, 42
INDEX
Lettuce and Vegetable Spin Drier.......................................... 65
Mark 7 Component Crafted Equipment........................ 69-72
Rack Dispensers
Mobile....................................................................................62-66
Refrigerators
Mobile Serving Counter........................................... 22-23, 41
Mobile Combo Hot/Cold Serving Counter.............. 33, 42
Serving Counters
All purpose................................. 22, 25, 28, 31, 37, 41-42, 46
Beverage.............................................................................. 36, 45
Combination Hot/Cold................................................... 33, 42
Frost Top.........................................................................24, 34, 43
Heated............................................................................22, 31, 40
Ice Cream.......................................................................26, 38, 47
Ice Pan................................................................................... 35, 44
Milk........................................................................................ 38, 47
Refrigerated............................................. 22-23, 32, 35, 41, 44
Tray Dispensers
Mobile Cantilever Frame....................................................... 62
Mobile Enclosed Frame......................................................... 63
Mobile Open Frame.......................................................... 64-65
Utility Carts....................................................................................... 66
Limited Warranty for Commercial Products..................... 73
Specifications and prices subject to change without notice.
72
Tel: 905-624-1419 • 888-442-7526
Fax: 905-624-1851 • 800-361-2724
For more information, visit www.garlandcanada.ca
INDEX BY MODEL
KCU ...................................................................45
KH ................................................................... 40
KHC-NU............................................................ 42
KHCR-B............................................................. 42
KRB ................................................................... 48
ND ................................................................... 62
PWT ................................................................... 48
SALD-1.............................................................. 65
SB ................................................................... 62
SC ................................................................... 37
SCFT-NU........................................................... 34
SCI ................................................................... 35
SCS ................................................................... 39
SCSC-B.............................................................. 32
SCSC-EF............................................................ 32
SCTRI................................................................. 39
SCTS................................................................... 39
SCU ................................................................... 36
SE ................................................................... 26
SE-CS................................................................. 25
SE-C/SES-C...................................................... 22
SE-F/SES-F....................................................... 24
SE-HC/SES-HC................................................ 23
SE-H/SES-H..................................................... 22
SE-ICE................................................................ 26
SE-I/SES-I......................................................... 23
SE-TS.................................................................. 25
SE-U/SES-U..................................................... 24
SH ................................................................... 31
SHC ................................................................... 33
SHCR-B.............................................................. 33
SRB ................................................................... 39
SWT ...................................................................39
T ................................................................... 63
T2 ................................................................... 63
UCE ................................................................... 66
UTS ................................................................... 66
UTSP.................................................................. 66
Specifications and prices subject to change without notice.
73
Tel: 905-624-1419 • 888-442-7526
Fax: 905-624-1851 • 800-361-2724
For more information, visit www.garlandcanada.ca
INDEX
CAB2.................................................................. 59
CAB3.................................................................. 60
CAB4.................................................................. 61
CD ...................................................................62
CT ...................................................................62
DCBC................................................................. 14
DCBU................................................................. 14
DCBU................................................................... 9
DCCS-DD......................................................... 12
DCCS-SD.......................................................... 12
DCDM................................................................ 13
DCFS.................................................................. 18
DCFSR............................................................... 19
DC-FT.................................................................. 7
DC-H.................................................................... 5
DCHS................................................................. 13
DC-IC................................................................... 6
DC-L..................................................................... 7
DC-MC................................................................ 6
DCRU................................................................... 8
DCRU-H.............................................................. 8
DCRU-IC............................................................. 9
DCRU-L............................................................. 10
DCRU-MC........................................................... 9
DCRU-T............................................................. 11
DC-T................................................................... 11
DC-TM............................................................... 13
FLEXISHIELD® FOOD SHIELDS................ 18
FT2-SN.............................................................. 65
GOCART - MOBILE SERVINC KIOSK......... 4
KC ................................................................... 46
KCF ................................................................... 47
KCFM................................................................. 47
KCFT-NU........................................................... 43
KCI ................................................................... 44
KCM ................................................................... 47
KCS ...................................................................48
KCSC-B.............................................................. 41
KCSC-EF............................................................ 41
KCTS................................................................... 48
HOW TO ORDER DELFIELD MARK 7 EQUIPMENT
Need A Quote?
Delfield Sales ATTN:_____________________________________________________
Dealer ATTN: _________________________________________________________
Field Quote Request
Project Name:______________________________________ Bid Date:__________________________
Location: (City/State)_________________________________ Install Date:________________________
Consultant:_______________________________________ Phone Number:_____________________
Is Line Up:
Refrigerated Units:
Hot Food Wells:
Hot Food Wells:
Pre Wired to:
Are Drawings Available:
Similar to a Job Previously Quoted:
Accessories Supplied and Installed by Delfield:
Customer Supplied/Installed by Delfield:
Field Installed by Customer:
Any Size Restrictions for Installation Site:
Finish of Equipment:
Is this a:
 Component Crafted Custom Equipment
 Shelley
 Self-contained
 Remote
 Individual
 Open Bath
 Electric
 Gas
 Breaker Panel
 J-Box
 Plan
 Elevation (scale)
 Hand Sketch
 Name:
 Yes
 No
 Yes
 No
 Yes
 No
 Max Size_____________________________________
 S/S
 Quote Only
 Laminate
 Quote and Drawing
Key for labeling drawing:
 Refrigerated
A:  Dry Storage Unit
B:  Raised Refrigerated Rail
 Salad Opening
C  Hot Food Wells
 Mega Top Opening
D:  Pass-thru Storage
 Refrigerated
 Roll Warmer
 Refrigerated Drawers
E:  Dry Drawer
 Single  DoubleWidth:_____
F:  Overshelf
Length:_____
Width:_____
G:  Microwave Shelf:
H:  Outlets
 Heat Lamps
 Empty Baskets
I:  Hand Sink: Size:___________________________
J  Production Units
K:  Top Extension
L:  Open Storage
 Sliding Door
74
Notes
75
LIMITED WARRANT Y FOR COMMERCIAL PRODUC TS
Notes
76
Notes
77
Limited Warranty for Commercial Products
LIMITED WARRANTY
• T his warranty is subject to the users normal maintenance and
care responsibility as set forth in the Service and Installation
Manual, such as cleaning the condenser coil, and is in lieu of all
other obligations of GC.
Garland Canada (GC) warrants this product to be free from defects
in material and workmanship for a period of one (1) year from the
date the product is installed or twenty-four (24) months from the
date of shipment from our facility, whichever comes first, and sold
within Canada.
During the warranty period, GC shall, at GC’s option, repair or replace
parts determined by GC to be defective in material or workmanship,
and with respect to services, shall re-perform any defective portion
of said services. The foregoing shall be the sole obligation of
GC under this Limited Warranty with respect to the equipment,
products and services. With respect to equipment, materials, parts
and Accessories manufactured by others, GC’s sole obligation
shall be to use reasonable efforts to obtain the full benefit of the
manufacturer’s warranties. GC shall have no liability, whether in
contract, tort, negligence, or otherwise, with respect to non-GC
manufactured products.
LIMITATIONS OF LIABILITY
The preceding paragraphs set forth the exclusive remedy for all
claims based on failure of, or defect in, products or services sold
hereunder, whether the failure or defect arises before or during the
warranty period, and whether a claim, however instituted, is based
on contract, indemnity, warranty, tort (including negligence), strict
liability, implied by statute, common-law or otherwise , and GC its
servants and agents shall not be liable for any claims for personal
injuries, incidental or consequential damages or loss, howsoever
caused. Upon the expiration of the warranty period, all such liability
shall terminate. THE FOREGOING WARRANTIES ARE EXCLUSIVE
AND IN LIEU OF ALL OTHER WARRANTIES, WHETHER WRITTEN,
ORAL, IMPLIED OR STATUTORY. NO IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE
SHALL APPLY, GC DOES NOT WARRANT ANY PRODUCTS OR
SERVICES OF OTHERS.
WHO IS COVERED
This Limited Warranty is available only to the original purchaser of
the product and is not transferable.
REMEDIES
EXCLUSIONS FROM COVERAGE
The liability of GC for breach of any warranty obligation hereunder is
limited to: (i) the repair or replacement of the equipment on which
the liability is based, or with respect to services, re-performance of
the services; or (ii) at GC’s option, the refund of the amount paid for
said equipment or services. Any breach by GC with respect to any
item or unit of equipment or services shall be deemed a breach
with respect to that item or unit or service only.
• R
epair or replacement of parts required because of misuse,
improper care or storage, negligence, alteration, accident, use
of incompatible supplies or lack of specified maintenance shall
be excluded;
• N
ormal maintenance items, including but not limited to, light
bulbs, fuses, gaskets, O-rings, interior and exterior finishes,
lubrication, de-liming, broken glass, etc.;
WARRANTY CLAIM PROCEDURE
• Failures caused by improper or erratic voltages;
Customer shall be responsible to:
• Improper or unauthorized repair;
• Immediately advise the Dealer or GC’s Factory Authorized Servicer
of the equipment serial number and the nature of the problem.
For a list of Factory Authorized Services, please refer to www.
garlandcanadaservice.ca;
• C
hanges in adjustment and calibration after ninety (90) days from
equipment installation date;
• T his Limited Warranty will not apply to any parts subject to
damage beyond the control of GC, or to equipment which
has been subject to alteration, misuse or improper installation,
accidents, damage in shipment, fire, floods, power changes, other
hazards or acts of God that are beyond the control of GC;
• V
erify that the problem is a factory responsibility. Improper
installation or misuse of equipment is not covered under this
Limited Warranty;
• C
ooperate with the Factory Authorized Servicer so that warranty
service may be completed during normal working hours;
• T his Limited Warranty does not apply, and shall not cover any
products or equipment manufactured or sold by GC when
such products or commercial equipment is installed or used in
a residential or non-commercial application. Installations not
within the applicable building or fire codes render this Limited
Warranty and any responsibility or obligations associated therein
null and void. This includes any damage, costs or legal actions
resulting from the installation of any GC commercial cooking
equipment in a non-commercial application or installation, where
the equipment is being used for applications other than those
approved for by GC;
• T ravel time not to exceed two (2) hours and mileage not to
exceed one hundred fifty (150) kilometres. Does not include
travel other than overland, overtime, holiday charges and any
special arrangement.
GOVERNING LAW
For equipment, products and services sold in Canada this Limited
Warranty shall be governed by the laws of the province of Ontario,
Canada excluding their conflicts of law principles. The United
Nations Convention on Contracts for the International Sale of
Goods is hereby excluded in its entirety from application to this
Limited Warranty.
• If any product is cleaned without using an approved GC cleaning
solution, this Limited Warranty shall be void;
• Removal, alteration or obliteration of the rating plate;
Garland Canada
1177 Kamato Road
Mississauga, Ontario
Canada L4W1X4
onsequential damages (the cost of repairing other property
• C
which is damaged) loss of time, profits or any other incidental
damages of any kind.
• T his warranty does not cover the refrigerator drier or the light
bulbs used in the unit;
www.garlandcanada.ca
78
Canadian Regional Sales Representatives
YK
NT
NU
NF
BC
AB
MB
SK
QC
ON
PE
NB
NS
Canada
REGION
British
Columbia
Alberta
Prairies
Ontario
Quebec
Atlantic
Canada
REP / AGENT
E-MAIL
CELLULAR
Paul Montpellier – Regional Manager
[email protected]
780-446-1566
Ryan Lewis – (Sales Rep)
[email protected]
604-329-0684
Paul Montpellier – Regional Manager
[email protected]
780-446-1566
James Goodman – Sales Rep (Calgary)
[email protected]
403-618-3636
Sandro Salvador – Sales Rep (Edmonton)
[email protected]
780-405-2637
Jeff McGowan – Regional Manager
(SK, MB, North & Eastern Ontario)
[email protected]
647-231-3815
Luigi Encarnacion – Sales Rep (Central Ontario)
[email protected]
416-629-8261
Paul Lockley – Sales Rep (S.W Ontario)
[email protected]
416-629-8287
Steve Wilkinson – Sales Rep (National Accounts)
[email protected]
416-886-2172
Tom Carman – Regional Manager
[email protected]
514-835-2094
Daniel Laurent – Sales Rep
[email protected]
514-835-2095
Tony Taylor – Regional Manager (NL, PEI, NB, NS)
[email protected]
506-872-0071
Aaron Taylor – Regional Manager (NL,PEI, NB, NS)
[email protected]
506-872-1177
Steven Donnelly – Sales Rep (NS)
[email protected]
902-999-7631
GARLAND CANADA CUSTOMER SERVICE
VOICE
FAX
Sales
(888) 442-7526
(800) 361-2724
KitchenCare (Parts, Service and Warranty)
(844) 724-2273
N/A
79
1177 K A M ATO R O A D, M I S S I S S AU G A , O N L 4 W 1 X 4 C A N A D A
9 0 5 . 6 2 4 . 1 4 1 9 • FA X 9 0 5 . 6 2 4 . 1 8 5 1 • W W W. G A R L A N D C A N A D A . C A
Scan the code below to locate a dealer, distributor or
sales representative in your area.
www.garlandcanada.ca/minisite/sales
FINANCE
Manitowoc Foodservice offers low-rate, fast approval financing on all our leading brands through Manitowoc Finance.
Preserve capital, simplify budgeting and get the equipment you need, today.
SERVICE
Manitowoc KitchenCare helps protect and maintain your foodservice equipment, ensuring that it performs like it should
throughout its lifecycle. KitchenCare features multiple levels of care, including advantages that make it the best in the
industry—expert service, easy-access assistance, and parts that are at the ready when your equipment needs a quick fix.
OUR BEST-IN-CLASS
BRANDS INCLUDE:
Cleveland, Convotherm,® Dean,® Delfield,® Frymaster,® Garland,® Kolpak,® Koolaire,® Kysor Panel Systems,® Lincoln, Manitowoc®
Beverage Systems, Manitowoc® Ice, Merco,® Merrychef,® Multiplex,® RDI Systems, Servend,® U.S. Range and Welbilt®
To learn how Manitowoc Foodservice and its leading brands can equip you, visit our global website at
www.manitowocfoodservice.com then find the regional or local resources available to you.
©2015 Manitowoc 10/15
In accordance with our policy of continuous product development and improvement, the information and prices listed are subject to change at any time without notice.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement