03-2010:A

03-2010:A
Product data sheet
Sheet No.: 1.604.09 - Rev: A, Page 1 of 3
March, 2010
Date:
FieldQ
Smart - Control Modules
QC31: DeviceNet
Description:
This FieldQ Control Module offers an integrated concept for
valve automation. Its compact and robust construction incorporates basic control and feedback functionality and communicates through the DeviceNet™ protocol.
Construction
The Control Module is mounted at the side of the Pneumatic
Module in front of the basic actuator housing. Inside are
terminals available for connecting DeviceNet™ wiring. Two
cable entries are available for this purpose.
Features
- ODVA DeviceNet™ digital communication.
- Supports both single and double acting actuators.
- One entry for all wiring (control and feedback), using
DeviceNet cabling.
- IPT-technology (Intelligent Position Tracking).
- Automatic initialization for easy setup of the actuator.
Pressing 4 seconds simultaneously the “Open” and
“Closed” reassignment buttons starts auto-initialization procedure and sets automatically the feedback limit switches.
- Readjustable or Reversible position feedback using the
reassignment buttons.
- Three indication LED’s for “Status”, “Open” and “Closed”
position. Status LED indicates:
Initialization procedure running
*HQHUDOVSHFL¿FDWLRQV
Material housing
: Aluminium alloy
Electrical connections : Internal terminal strip
: Optional quick connector
&DEOHHQWULHV
[0[RU[´137
(QFORVXUH
,31(0$;
Finish
: Polyester non-TGIC based powder
coating.
2SHUDWLQJPHGLD
$LURULQHUWJDVVHV¿OWHUHGDW
micron.
7HPSHUDWXUH
ƒWRƒ&ƒWRƒ)
Dimensions
: See 1.603.01 metric
6HH LPSHULDO81&
6HH ',1
Blinking
Successful initialization procedure
LED is on
No or failed initialization
Flashing
FieldQ Button board and wiring compartment
Automatic initialization:
Push 4 seconds
Closed reassignment button
Closed LED
DeviceNet™
status LEDs
1 2 3 4 5
- Control Module is easily plugged in the Pneumatic Module.
- Modular functionality for easy update towards present and
future bus systems.
- The power supply and all inputs and outputs are galvanic isolatedZKLFKRIIHUVJUHDWHUÀH[LELOLW\IRUV\VWHPV
connection.
- Module
Main Status LED
Open LED
Open reassignment
button
- Network
Main Status LED
on
off
LED = Flashing
on
off
LED = Blinking
Time
TM
www.FieldQ .com
Copyright © Emerson Process Management. The information in this document is subject to change without notice. Updated data sheets can be
obtained from our web site www.Fieldq.com or from your nearest Valve Automation Center:
America’s: +1 813 630 2255 (fax +1 630 9449) Europe: +31 74 256 10 10 (fax +31 74 291 09 38) $VLD3DFL¿F: +65 626 24 515 (fax +65 626 80
028)
Product data sheet
Sheet No.: 1.604.09 - Rev: A, Page 2 of 3
March, 2010
Date:
FieldQ
Communication Protocol:
*HQHUDOSXUSRVHGLVFUHWH,2&ODVVZLWKREMHFWV
7DEOH 3URWRFROGHWDLOVDQGVSHFL¿FDWLRQV
Common and DeviceNet
VSHFL¿F2EMHFWV
Identity Object
Message Router Object
DeviceNet Object
Assembly Object
Connection Object
Discrete Input Point Object
Discrete Output Point Object
Analog Input Point Object
Controller Object
Monitor Object
Device Conformance
Communications
,23URWRFROV
Baud Rate
Refresh rate
DeviceNet Connection
Voltage isolation
Nominal Power
0D[LPXP3RZHU
Class ID Instance ID(s)
1
1
2
1
3
1
4
100, 101
8
100, 101
9
100
10
100
100
1
101
1
2'9$'HYLFH1HW6SHF9RO,5HY
Vol. III Rev 1.8
3UH¿QHG0DVWHU6ODYH&RQQHFWLRQ
Set, Group 2 Server.
3ROOHG,2&KDQJHRI6WDWH&26
&\FOLF([SOLFLWDQG'\QDPLF([SOLFLW
connection objects.
Default set to "Auto-baud
&DQEHVHWWRRUNEVHF
PVN+]PLQLPXP
SROHWHUPLQDORUTXLFNFRQQHFWRU
None
120mA @ 11VDC
P$#9'&
2.0 W
Options
Manual Control
- Can be added as kit or factory option in 2 versions,
“Push button” or a “Push and lock” button.
Glands and plugs
- FieldQ Control Modules can be shipped with plastic or metDOJODQGV0[RU´137DQGUDWHG,3RUKLJKHU
Hazardous area executions:
- The DeviceNet™ Control Module QC31 is available with
optional Non-Incendive or Non-Sparking approvals as listed
below:
- FM
: Non-Incendive, Class I, II, III, Div.2,
*URXSV$%&'()*77\SH;,3
: Class I, Zone 2, IIC T4
&HUWL¿FDWH
- CSA : Non Incendive: Class I, II, III, Div.2,
Groups ABCDEFG, T4
([Q$,,7&ODVV,=RQH
: DIP A22 TA 90°C
&HUWL¿FDWH
Ambient temperature:
7#7D ƒ&«ƒ&ƒ)«ƒ)
DeviceNet™ terminal wiring connections:
'HWDLOHG1RQ,QFHQGLYH1RQVSDUNLQJZLULQJLQVWUXFWLRQVZLOO
be shipped with the product, see control drawing: see Installation Guide : DOC.IG.QC31.1
Wiring dimensions
&DEOHUDQJH
DeviceNet™ terminal wiring connections:
-V
CAN_L
1
2
3
4
5
CAN_H
+V
PPRU$:*
Quick connector:
- The DeviceNet™ Module can optionally be equipped with
SUHZLUHGTXLFNFRQQHFWRUV7ZRYHUVLRQVDUHDYDLODEOH´
or M12 (male chassis part)
4XLFNFRQQHFWRUVDVVKRZQEHORZDUHH[FOXGHGIRUQRQ
Incendive or non-sparking use in hazardous area’s classi¿HGDV=RQHRURU&O,,,,,,'LY
QC31
DeviceNet™
control module
Shield
Quick connector pinouts:
(male chassis part)
3
2
4
5
1
7/8" UNC
4
1
3
2
5
M12
3
5
1
4
2
Quick
connector
Black
Blue
Grey
White
Red
1
2
3
4
5
Terminal
TM
www.FieldQ .com
Copyright © Emerson Process Management. The information in this document is subject to change without notice. Updated data sheets can be
obtained from our web site www.Fieldq.com or from your nearest Valve Automation Center:
America’s: +1 813 630 2255 (fax +1 630 9449) Europe: +31 74 256 10 10 (fax +31 74 291 09 38) $VLD3DFL¿F: +65 626 24 515 (fax +65 626 80
028)
Product data sheet
Sheet No.: 1.604.09 - Rev: A, Page 3 of 3
Date:
March, 2010
DeviceNet™ status LEDs
Status feedback is provided according to the DeviceNet™
standard. For more detailed information on button board functionality and LED indications, see Installation Guide :
DOC.IG.QC31.1
Diagnostics on QC31 DeviceNet™ Control
module
The FieldQ Control Module with DeviceNet™ communication
has diagnostic capabilities. These process parameters can
JLYHLQIRUPDWLRQDERXWFRPPXQLFDWLRQFRQGLWLRQYDOYHDQG
or actuator unit. It enables to predict failures in advance and
makes maintenance easier to schedule.
Monitor Object
The QC31 DeviceNet™ Control module presents its diagnostics through the Instance Attributes of the Monitor Object,
&ODVV,'KH[) as shown in table 2 and 3.
FieldQ
Table 2 Monitor Object Instance Attributes
Attribute
ID
1
2
3
4
6
8
9
10
11
Name
Device Status
Zero power condition: 1 = Open, 0 = Close
Recognize unit status
Position
Time in position
Open travel timer
Close travel timer
Cycle counter
Average Open travel timer
Average Close travel timer
Selected FieldQ command to open and close
Table 3 Device Status Attributes
Bit
0
1
2
3
4
6
8
9
10
11
12
13
14
Description
,QWHUQDOFRPPXQLFDWLRQVORVWVHWE\'HYLFH1HW¿UPware)
GMR_error
Temp_sensor_error
6\VWHPBWHPSBH[FHHGHG
Software_error
travel_deviation
Shutdown_set
Unknown error
Init_bad_repeatability
Init_running
Init_stopped
Init_range_error
Init_timed_out
QD
Init_ok
Init_default
TM
www.FieldQ .com
Copyright © Emerson Process Management. The information in this document is subject to change without notice. Updated data sheets can be
obtained from our web site www.Fieldq.com or from your nearest Valve Automation Center:
America’s: +1 813 630 2255 (fax +1 630 9449) Europe: +31 74 256 10 10 (fax +31 74 291 09 38) $VLD3DFL¿F: +65 626 24 515 (fax +65 626 80
028)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement