GAME OF LIGHTS R SCEN E RS TE ES LO YEA G ENER CO SA VIN GY KIT FOR CONTROLLING LIGHTS VIA SMARTPHONE GUARAN PERFECT LIGHT ATMOSPHERE FOR EVERY OCCASION AND MOOD. www.inels.com/kits User´s manual 2.0 EVEN YOUR HOME CAN „SHINE“! Would you like some help? TECHNICAL SUPPORT +420 800 100 671 [email protected] GAME OF LIGHTS CONTROL YOUR LIGHTS VIA SMARTPHONE It has never been easier to set the appropriate ambience for reading a book, watching a movie or a party with friends. All you need is wireless bulbs and Smart RF box. Then you can control every device from the comfort of your smartphone, tablet or smart TV. You can control not just colored or white light bulbs, but other appliances too. This kit will open up new horizons for home automation. It can be extended any time you need and according to your wishes. Depends on you if you want to find something new and upgrade your current installation. Thank you for buying the kit GAME OF LIGHTS. Another kits and additional units can be found on the last pages of the manual or at our webpage: www.inels.com/kits USER´S MANUAL CONTENT 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) 12) 13) 14) 15) 16) 17) Kit content ....................................................................................................................................................................................................................... How does it work? ................................................................................................................................................................................................... The range of RF signal ......................................................................................................................................................................................... HW installation .......................................................................................................................................................................................................... App download .............................................................................................................................................................................................................. First run ............................................................................................................................................................................................................................. App control ..................................................................................................................................................................................................................... Edit the unit name .................................................................................................................................................................................................. Create rooms ................................................................................................................................................................................................................ Assign unit to the room ....................................................................................................................................................................................... Tab Favorites, Scenes, Cameras .................................................................................................................................................................... Assign a new unit ..................................................................................................................................................................................................... Delete a room/unit ................................................................................................................................................................................................. Description and technical parameters of smart RF box ......................................................................................................... Description and technical parameters of wireless bulb ........................................................................................................ Recommended and other RF units ........................................................................................................................................................... Overview of other kits ......................................................................................................................................................................................... 18) Virtual kits ....................................................................................................................................................................................................................... 5 6 7 8 9 10 11 12 13 14 15 18 19 20 22 24 28 31 LEGEND: Smart RF box – the mediator between smartphone and wireless units RF (Radio Frequency) – a radio frequency signal for communication of wireless devices. It works at 868 MHz frequency. The signal goes through buildings which affect the signal (see page 7) Unit, wireless unit, RF unit – it is a receiver or actuator, which receives RF commands and controls connected devices. It can be e.g. bulb, switching socket, thermovalve etc. RGB – Red-Green-Blue - used for LED bulbs and LED strips, the color chips can mix up any color Application – iNELS Home Control (iHC) is an app for smartphones free to download from GooglePlay (Android) or iTunes (Apple, iOS). App for controlling wireless units. Network cable – LAN or PATCH cable used to connect devices within a LAN network (e.g. Smart boxes and Routers) LAN – Local Area Network, a computer network. Computer cables (UTP) are distributed throughout the building and connected to switch. They connect computers and other IP devices connected to network. 4 U S E R ´S M A N U A L 2 . 0 KIT CONTENT Order code: 4931 3× WIRELESS RGB BULBS RF-RGB-LED-550 These LED bulbs contain three color chips (RGB), which can mix up any color (including white) at different temperatures. • bulb has a built-in receiver and dimmer, so it can be easily replaced for the original bulb • • function: colorful scenes, brightness setting, color blending parameters: RGB chips, power supply 230V AC, power 9 W, luminous fl ux of 550 lm, E27 socket, dimension 65 x 115 mm Order code: 4684 1× SMART RF BOX eLAN-RF-OO3 The smart box is the mediator between your controller (phone, tablet, Samsung Smart TV) and wireless units controlling lights, heating, blinds, sockets and other appliances. • appliances can be controlled from your home WiFi network • if you would like to control your appliances once you are not at home, please contact your network provider (it is necessary to preset your router) parameters: connection LAN RJ45, power supply 10 to 27 V DC (adapter included in the package), dimension 90 × 52 × 65 mm • 1× W W W. I N E L S . C O M /K I T S CABLE 1M Order code: 6719 Order code: 6700 NETWORK 1× POWER ADAPTER 5 HOW DOES IT WORK? Smartphone sends a command over WiFi network to Router, that is connected with Smart RF box. It converts this command to wireless command to control bulb. 1 2 3 Each wireless bulb is numbered 1,2,3, that corresponds to a device type name in App (the default names of the light bulbs - Light 1, Light 2, Light 3). It is possible to connect up to 40 colored bulbs or other wireless units (see page 24-27). Router Adapter AC 230V Smart RF box WiFi Light Control ra range of your smartphone depends on smartphon Wi-Fi coverage (power). your Wi-F Remote control If you want to control your devices even outside the house, contact your IT administrator. 6 U S E R ´S M A N U A L 2 . 0 RANGE OF RF SIGNAL The range of RF signal is up to 200m in the free open air. TRANSMISSION OF RADIOFREQUENCY SIGNALS IN VARIOUS MATERIALS FE brick walls wooden structures with plaster boards reinforced concrete metal partitions 60 - 90 % 80 - 95 % 20 - 60 % 0 - 10 % common glass 80 - 90 % INSTALLING A WIRELESS TOUCH UNIT Place a Smart RF box in the best possible position from Wireless units. Optimal placement of Smart RF box is in the middle of space between other RF units. Please keep in mind, that the number of walls, ceilings reduces the signal strength and thus limit the range of wireless units. Order code: 4510 REPEATER to extend the range In case of insufficient connection between RF units, we offer the following possibilities: RELOCATE A UNIT USE REPEATER (plug-in signal repeater) - install between Smart RF box and wireless unit which is out of the range. W W W. I N E L S . C O M /K I T S 7 HW INSTALLATION 1. Simply replace your existing bulbs by remotely controlled one. E27 551125 Remove the original bulb. 2. Screw the new wireless bulb. Connect Smart RF box to the socket (via adapter) and to your router (via network cable). Plug adapter into the nearest power socket and connect to Smart RF box. Connect Smart RF box with Router via network cable. Remote control If you want to control your devices remotely (out of the house), please contact your Internet service provider. IP address Smart RF box has a DHCP, what means that it automatically assigns itself an IP address from the range of your network settings. In the case of other settings of your network please contact our technical support or your Internet provider. 8 U S E R ´S M A N U A L 2 . 0 APP DOWNLOAD 1. Download app to your smartphone. You can download Apps from your Google Play (for smartphones with Android operating system) or from iTunes (for iPhone). App is free to download and there is no monthly fee. iHC - MARF iHC - MIRF Download from Link to your App: pp Link to your App: play.google.com e.com itunes.apple.com le.com W W W. I N E L S . C O M /K I T S 9 FIRST RUN WiFi Make sure your smartphone is connected to the same Wi-Fi network as Smart RF box. To set the IP address press the „Settings“. Then tap the Tab „eLAN Settings“, and click on the magnifying glass icon in the upper-right corner. The searching of Smart RF box is performed. Inserts name for ela an My house s Name: My house CANCEL My y house Obnovit You can give any name to Smart RF box. On the right side of the screen confirm your selection of Smart RF box (green symbol). Then double tap the Back button to return. The home screen will appear with notification „New data downloading“ and then the preset items will be displayed. 10 Wait please.. U S E R ´S M A N U A L 2 . 0 APP CONTROL Click on the icon „iNELS“ to return to the Home screen. By clicking the individual items (Light 1, Light 2, Light 3) you switch bulbs ON/OFF . State ON/OFF is displayed on the right in round indicator. Hold your finger on the name to open the extended control. Color selection - choose the color from the main area or by pressing the color icons around the main area you can change the color of your bulb ON/OFF- tap the icon ON/OFF Brightness- drag your finger across the slider to adjust the brightness of the bulb Circus mode - automatic blending of colors After turning it off and on again, the bulb saves last used value of brightness. W W W. I N E L S . C O M /K I T S 11 EDIT THE UNIT NAME The default names of the light bulbs can be changed. Click on the „Settings“, then on the „Configuration“. Units - the list of the added units. dimming light RF-RGB-LED-550 RF-RGB-LED-550 Select the unit whose name you want to change and edit the Unit name. To stop recording changes, click the Save button. By pressing the Back button you will return to the Menu Units. 12 U S E R ´S M A N U A L 2 . 0 CREATE ROOMS The room is used to group units. Click on the „Settings“. Then on „Configuration“ and „Rooms“. Click the Add button. Enter any name and select a type of the room (the room type determines the icon associated with the room). In the same way you enter the next room (the room Lights is set as default). W W W. I N E L S . C O M /K I T S 13 ASSIGN A NEW UNIT Click on the „Settings“, then on „Configuration“ and assing units. Select the room to that you want to assign the units then tick the units, which you want to assign to the room and click „Next“. 14 U S E R ´S M A N U A L 2 . 0 TAB FAVORITES Tab Favorites is used to choose the most commonly used Units. Click on the „Settings“ and then on the Tab „Favorites“. Press the Add button to open the list of all Units. Select the required units and by pressing the Save button you can assign them to the list. W W W. I N E L S . C O M /K I T S 15 TAB SCENES The Scene is used to perform multiple operations - by pressing a single key you can run several commands at once. Click on the „Settings“ and then the Tab Scenes. Pressing the Add button creates a Scene name, then select the units and click Next. You can assign several functions to the units from the menu bar at the top. Click on the function and drag your finger across the slider to adjust the brightness (e.g. brightness 0%). In the same way you will assign the function to other units. Then press Add. 16 U S E R ´S M A N U A L 2 . 0 TAB CAMERA To App you can connect and monitor up to 10 cameras such as iNELS cam or Axis. Click on „Settings“ and then on Tab Camera. Please enter all required data on the screen and then press button „Save“. iNELS cam: The name of camera: Any Enter the camera address: Any (default 192.168.1.5) The camera type: iNELS cam Login: admin Password: dumpodpalcem Directional control Zoom Axis: The name of camera: Any Enter the camera address: IP address assigned according to your network The camera type: Axis Login: root Password: pass PTZ (pan-tilt-zoom) - remote directional and zoom control Some cameras Axis provide pan, tilt and zoom functions (PTZ). In the app you can control motion picture (enabling wide area coverage) and zoom in/ zoom out (by button plus/minus). Complete list of supported cameras can be found at: www.inels.com W W W. I N E L S . C O M /K I T S 17 ASSIGN A NEW UNIT Click on the Settings, then on Configuration. Click on the Tab Units. To assign other Units click on Add. Enter the required data (The unit name: Any, The unit address: see Fig.1, The unit type: any - see Fig.1, select the icon: according to the function of the unit). Press „Save“ to add a new unit. 18 U S E R ´S M A N U A L 2 . 0 DELETE A ROOM/UNIT Click on the „Settings“ and then the „Configuration“. Click on the Tab Units or Rooms depending on what you want to delete. MARKING IP ADDRESSES AND TYPES OF INDIVIDUAL UNITS Fig.1 DESIGN THERMOVALVE DESIGN BOX Unit type: RFATV-1 Unit type: RFSA-61B Address: 007585 Address: 00150A 007585 DESIGN SOCKET Unit type: RFSA-66M 005A95 Unit type: RFSC-61/F Delete using long press. W W W. I N E L S . C O M /K I T S Address: 005A95 DESIGN MODULE Address: 00205A 00205B 00205C 00205D 00205E 00205F Note: the addresses used for illustration and are unique. 19 DESCRIPTION OF SMART RF BOX Front panel Communication protocol Red LED RF STATUS Antenna connector SMA Red LED RF STATUS - indication of RF transmission Oasis & RF Touch Compatible - defi nes the format of RF commands (RF Control system communication) Antenna connector - used to connect RF antenna Rear panel Yellow USB status LED Power connector 10-27V/ 200mA SELV LED indicator of ethernet communication Ethernet Ethern connector connect (RJ 4 45) USB B connector RESET button Green POWER LED indicator of power supply Power connector - used to connect adapter AC 230 V USB connector - in case of a power from USB and service purposes LED indication of ethernet communication - when pressing the button in the App, the LED is blinking POWER - power indicator RESET - device reset to the factory default settings 20 U S E R ´S M A N U A L 2 . 0 TECHNICAL PARAMETERS OF SMART RF BOX RF Control interface Communication protocol: iNELS RF Control - RFIO Transmitting frequency: 868 MHz Signal transfer method: two-way addressed message Output for antenna: SMA connector Indication of RF communication: red RF Status LED Antenna: 1 dB (included in the package) Range in free space: up 100 m Ethernet communication ETH operating status indicator: green LED ETH communication indicator: yellow LED Communication interface: 10/100 Mbps (RJ45) Supply voltage / Rated current: 10-27V DC / 200 mA PoE supply: Max. 27V / 200mA Connection: Jack connector Ø 2.1 mm Supply voltage indicator: green LED Power Others More power options: connector USB-B Indicator of USB activity: yellow USB Status LED Power supply: 230 V AC / 12V DC included in the package Operating temperature: -20 .. +55 °C Storage temperature: Degree of protection: -25 .. +70 °C IP 20 Pollution degree: 2 Operating position: any Installation: any Design: aluminum box Dimension: 90 x 52 x 65 mm IP 20 Protection: Factory settings RESET button: restart / device reset to the factory default settings Username: admin Password: elkoep IP address: 192.168.1.1 If you want to change the IP address of Smart RF box, please do that through the web interface. The detailed instructions can be found at webpage www.inels.com/kits. W W W. I N E L S . C O M /K I T S 21 WIRELESS RGB BULB Bulb description 65 mm Energy label 115 mm 550 6 30 000 22 Lumen Watt h Address 577145 U S E R ´S M A N U A L 2 . 0 TECHNICAL PARAMETERS OF WIRELESS BULB Power supply: 100-240V AC/50/60 Hz Max. power: 9W Power factor: <0.6 Beam angle: 360° RGB: 16,7 million colors Output Light output: 6W Luminous flux: 550 Lm Color temperature: RGB Brightness control: 0-100 % Service life: 30 000 hours Control RF comm. from transmitter: 868 MHz Range in open space: up to 20 m Other data: Working temperature: 0 .. + 50 °C Storage temperature: -30 .. + 70 °C Connection: E27 base Operating position: any Dimensions: 65 x 115 mm Weight: 150 g SPECTRUM 400 (ultra) Violet 450 Blue W W W. I N E L S . C O M /K I T S 500 Cyan 550 Green (wavelength in nm) 600 Yellow 650 Orange 700 Red 800 Purple (infra) 23 OTHER RF UNITS CONTROLLER PICTURE DEVICE DESCRIPTION TYPE/CODE WIRELESS WALL CONTROLLER RFWB-20/G Each of the 2 independent push-buttons can control any number of wireless units (switches, dimmers, shutters). In the design of LOGUS90 switch (plastic, glass, metal, wood, stone). Battery-powered 3V/CR2032. Color: white. 4037 RFWB-40/G WIRELESS WALL CONTROLLER Each of the 4 independent push-buttons can control any number of wireless units (switches, dimmers, shutters). In the design of LOGUS90 switch (plastic, glass, metal, wood, stone). Battery-powered 3V/CR2032. Color: white. 4060 RF KEY 4 BUTTON CONTROLLER - KEYCHAIN Wireless controller sends a command to switch ON/OF or dim any wireless device after pushing the button. You can control independently up to 4 devices. By one touch, you can switch ON any number of units at once. Battery-powered 3V/CR2032. 4375 WIRELESS REMOTE CONTROLLER WITH DISPLAY RF PILOT Universal controller with display enables you to comfortably control wireless units, using all their functions. It enables to create rooms, scenes and favorites sections/folders. It is possible to preset up to 40 units. Battery-powered 2xAAA. 4376 RFIM-20B WIRELESS CONTACT CONVERTER Transmitter serves as the contact converter of external device to the commands for wireless units. It contains 2 inputs, that can be switched ON permanently (by push-button or switch). Battery-powered 3V/CR2477, into an installation box. 4175 SWITCHES PICTURE DEVICE DESCRIPTION TYPE/CODE SWITCHING SOCKET RFSC-61 Quick solution for wireless control of plug-in appliances, when the switching socket is installed between the existing socket and a plug-in appliance. Output contact 16A/4000W, 6 functions, it is possible to control up to 32 controllers. Dimen.: 60x120x84 mm. WIRELESS SWITCH UNIT - 6 1-channel and 2-channel switching actuator intended to be mounted into an installation box, that can switch any device. It can control up to 32 controllers. Power supply 230V. RFSA-61B: Switching contact 16A/4000W. RFSA-62B: 2 independent 8A/2x2000W contact. 24 French: 4560 Schuko: 4562 British: 4544 RFSA-61B (RFSA-62B) 4499 (4770) U S E R ´S M A N U A L 2 . 0 OTHER RF UNITS SWITCHES PICTURE DEVICE DESCRIPTION TYPE/CODE WIRELESS SWITCH UNIT - 6 OUTPUTS RFSA-66M 6-channel switching actuator intended to be installed in the swich-board contains 6 independent 8A contacts, that can switch any device connected in switchboard. Power supply 230V. The antenna AN-I included in the package can be replaced by external type AN-E what eliminates the influence of metal door of switchoboard. SWITCH UNIT FOR OUTDOOR USE 4282 RFUS-61 1-channel switching unit in the box that provides higher protection level. Intended for outdoor installation suited for wet, humid and dusty areas. Output switching contact 12A/3000W, power supply AC 230V, 6 functions. It it possible to control up to 32 controllers. Enclosure IP65, dimension 136x62x34 mm, color: grey. 4526 SWITCH UNIT FOR SHUTTERS (CONTACTLESS) RFJA-12B Used to control shutters, blinds, awnings, garage doors, gates, skylights - all devices that can be controlled in two directions. It can be controlled by up to 32 push-buttons of any controller. Intended to be mounted into an install. box or to the motor housing. Power supply AC 230V, switching capacity for the contact is 8A. 4682 DIMMERS PICTURE DEVICE DESCRIPTION TYPE/CODE DIMMING SOCKET (MULTI-FUNCTION) RFDSC-71 For dimming of lamps and lighting construction, when the switching socket is installed between the existing socket and the lamp. It allows you to dim incandescent bulbs, halogen lamps, dimmable energy saving bulbs and modern LED lighting sources up to 300 W. UNIVERSAL DIMMER (INBUILT) Wireless multifunction (7 functions) dimmer used to dim incandescent bulbs, halogen lamps, ... The type of lighting source is selected using the rotary switch. Intended to be mounted into an installation box. Power supply AC 230V. DIMMER FOR COLOURED (RGB) LED STRIPS Dimmer intended to be mouned in a switchboard to control coloured RGB. Strips with max. power 70 W / channel that corresponds to approximately 10 m of RGB strip. Power supply DC 12-24-V, option of color blending mode, control through keychain, RF Pilot or App. UNIVERSAL DIMMER Wireless multifunction (7 functions) dimmer used to dim incandescent bulbs, halogen lamps, dimmable energy saving bulbs and modern LED lighting sources up to 600W of power. Power supply AC 230V. W W W. I N E L S . C O M /K I T S 4594 RFDEL-71B 4512 RFDA-73M/ RGB 4681 RFDEL-71M 4897 25 OTHER RF UNITS LIGHTING PICTURE DEVICE DESCRIPTION TYPE/CODE COLOURED RGB LED STRIP, 5 METERS Coloured RGB strip, 7.2W/m (30 LED chips / m), length 5 m, width 11mm, outdoor-proof design, also designed for installation on aluminium rails, adhesive tape, it can be shortened by 10 cm, luminous flux of 660 lm/m, control by RFDA-73M dimmer, power supply 12V. POWER SUPPLY FOR 5 M RGB STRIP Power supply 230V/12V/60W to power 5m of RGB strip. Intended for outdoor use (IP67), dimension 162,5 x 42,5 x 32 mm. WIRELESS COLOURED BULB This RGB LED bulb consists of 3 color chips which can mix up any color at different temperatures. Bulb has a built-in receiver and dimmer, so it can be easily replaced for the original bulb. Other functions: colorful scenes, brightness setting etc. WIRELESS WHITE BULB This bulb comes in both warm and cool white, it has built-In wireless receiver and dimmer, it can easily be placed in any existing base and control by any controller. 7,2W, RGB, 30LED/M 6630 DC 12V/5A 60W 6589 RF-RGBLED-550 4931 RF-WHITELED-675 4936 TEMPERATURE CONTROL PICTURE DEVICE DESCRIPTION TYPE/CODE WIRELESS TEMPERATURE CONTROLLER RFTC-50/G Digital thermostat in the design of the LOGUS90 switch (plastic, glass, metal, wood). It measures the room temperature and according to the set heating program (weekly mode) it sends commands to the switching unit (heating device). Battery-powered (2xAA). It is possible to control up to 4 heating circuits. SWITCH UNIT WITH A TEMPERATURE SENSOR RFSTI-11/G Temperature unit in the design of LOGUS90 switch. It measures the temperature and switch a heating circuit at the same time. Relay contact 8A/2000W, power supply 230V, the possibility to connect an exter. temperature sensor. It is possible to connect up to 30 units. RFSTI-11/G/ BR/BR WIRELESS THERMOVALVE RFATV-1 Wireless thermovalve measures the room temperature and sends it to the Smart RF box, that compares the temperature records with the set temperature and according to set program it sends a command to open or close the radiator valve. 26 RF TC50/G/ BR/BR 6307 U S E R ´S M A N U A L 2 . 0 OTHER RF UNITS TEMPERATURE CONTROL PICTURE DEVICE DESCRIPTION WIRELESS TEMPERATURE SENSOR Internal or external sensor measures the temperature starting from -20 up to 50°C. Intended to be mounted into an installation box, but it can be also placed anywhere. Recommended external sensor - TC/TZ 3-6-12 m. Battery-powered 3V/CR2477. THERMODRIVER Electric thermodrive to be mounted on the radiator valve (including adapter VA80 for valves Heimeier, Oventrop, Schlösser, Herb or Onda (M30 x 1,5)). Power supply: 230 V (closed without power). TYPE/CODE RFTI-10B 3175 TELVA/230V 6602 SYSTEM UNITS PICTURE DEVICE DESCRIPTION TYPE/CODE WIRELESS TOUCH UNIT - SURFACE MOUNT RF TOUCH - W Used to control up to 40 wireless units. Besides switching, controlling and dimming, it includes thermostats with weekly programming and it also enables to connect detectors. In the size of the switch, with frames in the LOGUS90 design intended for surface-mounted installation. Power supply 230V. White color. SMART RF BOX, SMART WI BOX The mediator between your controller and wireless units controlling lights, heating, shutters, sockets and other appliances. eLAN-RF-003: It is connected to LAN network of your router and it is placed to ensure the visibility to other controlled units. eLAN-WI-003: App for controlling is free to download from GooglePlay or iTunes Store. IP CAMERA FOR OUTDOOR USE Indoor color camera D-Link DCS-933L/E can be easily connected to LAN through cable or to wireless WiFi network. It is possible to monitor up to 10 cameras in the App. Resolution 640x480, dimension: 80x115x80mm, power supply: included in the package 5V/1A. MULTIFUNCTIONAL GSM COMMUNICATOR GSM gate intended to be mounted in a switchboard enables a remote control of wireless units via SMS text message. It can also send SMS text message containing information about the status of wireless units. It contains 4 binary inputs for signals and 2 relay outputs 8A/2x2000W to switch directly the unit. REPEATER TO EXTEND THE RANGE Repeater in the socket design, that is used to increase the range of signal or in case of low signal between controller and unit. It is possible to repeat the signal of up to 20 units. W W W. I N E L S . C O M /K I T S RFTW-AWH-BWH-CWH eLAN-RF-003 (Wi-003) 5173 (487 2) iNELS CAM 6703 RFGSM-220M 4604 RFRP-20 4510 27 THE OVERVIEW OF OTHER KITS REMOTE HEATING 1× 3× ORDER CODE: 5456 SMART RF BOX WIRELESS THERMOVALVES KIT TO CONTROL HEATING VIA SMARTPHONE Includes 3 wireless thermovalves that are installed instead the standard radiator valves. They measures the room temperature and send it to the Smart RF box. Smart RF box compares it with the temperature set along with the time schedule in the application of your phone and sends a command to open or close the valve. You can always turn on the heating circuit via app, whether you‘re at home, or just going to visit your cottage and do not want to come to unheated place. EASY HEAT REGULATION 1× TEMPERATURE CONTROLLER 1× SWITCHING SOCKET ORDER CODE: 5458 KIT FOR WIRELESS TEMPERATURE REGULATION IN THE HOME This kit enables convenient and quick control of heater, oil heater, panel heater or portable air conditioner. Just plug the device into controlled switching sockets and appropriately place your controller RFTC-50G. The desired temperature is set on the controller, that compares it with the current record and it sends a command to turn the device ON. 28 U S E R ´S M A N U A L 2 . 0 THE OVERVIEW OF OTHER KITS HEATING WITH SAVINGS 1× ORDER CODE: 5455 WIRELESS CONTROL UNIT RF TOUCH WIRELESS 3× THERMOVALVES KIT TO CONTROL HEATING VIA WIRELESS RF TOUCH UNIT Includes 3 wireless thermovalves that are installed instead the standard radiator valves. Measures the room temperature and sends it to the RF Touch control unit. RF Touch compares it with the temperature set along with time schedule and sends a command to open or close the valve. You can set heating programs in the weekly schedule, separately for each circuit (room). RADIO & MUSIC IN THE SWITCH 1× LARA RADIO 2× SPEAKERS ORDER CODE: 5454 KIT FOR CONROLLING MUSIC, WHICH PERFECTLY FITS IN YOUR HOME´S INTERIOR LARA is a music and internet radio player. We have registered 40 favorite Czech radios stations as presets stations, but you can easily change it using configurator. LARA plays the music stored in the NASA storage or in the external source (phone, MP3 player) connected through cable on the front panel of device. Inbuilt amplifier allows direct connection of speakers (in the same LOGUS 90 design) or allows connection of external in-wall or ceiling speakers. W W W. I N E L S . C O M /K I T S 29 THE OVERVIEW OF OTHER KITS ONE CONTROLLER FOR ALL 1× 3× ORDER CODE: 5457 SMART IR BOX IR TRANSMITTER KIT FOR CONTROLLING IR DEVICES VIA A SMARTPHONE Thanks to Smart IR box, you can control home appliances via a Smartphone. Thus you no longer need a bunch of controllers, you do not have to look for them, and you do not need to replace the battery. You always stick your phone in your pocket, always at hand. Moreover, you can control devices which are placed in another room (e.g. you can turn off TV in the children room). YOUR HOUSE UNDER „THE THUMB“ 1× 2× SMART RF BOX 1× WIRELESS SWITCHING SOCKET COLORED WIRELESS BULB 1× CAMERA ORDER CODE: 5459 CONTROL YOUR HOUSE VIA A SMARTPHONE The kit “House under the thumb” which you hold in your hands is the basic starter kit for all of you, who would like to make your home more comfortable. The starter kit consists of 2 x colored wireless bulbs, 1 x switching socket and 1 x camera, what allows you to try the basic units of iNELS RF Control – wireless solution. Everything is preset to ensure fast and easy installation. 30 U S E R ´S M A N U A L 2 . 0 VIRTUAL KITS The virtual kit is a set of wireless units that are packed individually (as an individual product), but on the other hand they are preset together (they are meant to work together) to ensure simple installation. They are off ered at a discounted price and it is not possible to separate any unit from this price. UNDERFLOOR HEATING - BY WATER Any wireless temperature regulator measures the room temperature, it compares with set temperature and time program, then sends a command to switch on the units. Based on the command from temperature regulator, 6-channels switching unit is able to control up to 6 thermo-valves corresponding to heating circuits. KIT CONSISTS OF: Wireless temperature controller RFTC-50/G, wireless switch unit (6 outputs) RFSA-66M, thermodriver TELVA/230V. UNDERFLOOR HEATING - BY ELECTRICITY Temperature and switching unit (two in one) measures the fl oor temperature via external sensor (inbuild). Then it sends data to wireless touch unit RF Touch, which compares it with the temperature set along with the time schedule and then sends a command back to switch on/switch off the heating circuits. It is possible to connect up to 4 temperature/switching units. Advice 1) If just one reference temperature is enough for you, so then it can be measured by temperature sensor RFTI-10B and to switch up to 6 independent heating circuits you can use 6-channels switching actuator RFSA-66M. Advice 2) The wireless unit RF Touch can be replaced by Smart RF box and all can be controlled via your smartphone. Both solution can be used together. KIT CONSISTS OF: Switching actuator with thermosensor RFSTI-11/G, Wireless touch unit RF Touch. AGAINST THE FLOOD A wireless sensor monitors the water leaks or flooding in the critical places (basement, pits, shafts, bathroom, laundry,...) and sends immediately a command to the switching unit to close the solenoid valve of the main water supply. You can be also informed of that accident through GSM gateway by sending SMS text messages. KIT CONSISTS OF: Switch unit RFUS-61, wireless flood detector RFSF-1B, flood probe FP-1. We recommend: solenoid valve: MPW SS 304 - 1/2 (3/4) 230V AC. COLORED RGB LED STRIP The app in your smartphone can send (through smart RF box) the commands to the dimming unit to which the RGB strip is connected. From your app it is possible to switch ON/OFF, to set the color or run the scene of automatic color blending. Advice 1) The colored RGB strip can be controlled through RF Pilot, by controllers RFWB-20/40, RF key,... Advice 2) If you do not want the colored RGB strip, we can replace it by monochromatic (warm white, cool white, red, ...). Then you can connect 8 m of monochromatic strip (power 7,2W/m) to RFDA-73M to each output. KIT CONSISTS OF: Smart RF box, dimmer RFDA-73M, 2 x 5m coloured RGB strip 7.2W/m, power supply 230V/ 12V/100W. W W W. I N E L S . C O M /K I T S 31 Manufacturer: ELKO EP, Ltd. / Palackeho 493 Holešov - Všetuly 769 01 / Czech Republic phone: +420 800 100 671 / e-mail: [email protected] www.elkoep.com
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
advertisement
© 2021