Vulcan 806 Modular [0501741] [02/2010]

Vulcan 806 Modular [0501741] [02/2010]
OWNER'S MANUAL
806 MODULAR
PARTS
NOTE: MANUAL including SPECIFICATIONS, subject to change without notice.
All ratings specified are based on structural factors only,
not vehicle capacities or capabilities.
Miller Industries Towing Equipment Inc.
8503 Hilltop Drive
Ooltewah, Tennessee 37363
Phone (423) 238-4171 • FAX (423) 238-5371
FORM NO. 0501741
02 / 2010
PRICE $25.00
LIMITED WARRANTY
MILLER INDUSTRIES TOWING EQUIPMENT INC., hereinafter referred to as MILLER, warrants to the original
purchaser that each new MILLER wrecker or other MILLER products will be free from defects in material and
workmanship for a period of twelve (12) months from date placed in service, but in no event shall such warranty
period exceed twenty-four (24) months from date of manufacture by MILLER. The purchaser must promptly
notify MILLER in writing of any failure in material or workmanship. In no event shall MILLER accept such
notification later than twenty-four (24) months from date of delivery or twelve (12) months from date placed in
service, whichever is earlier.
MILLER's obligation under this warranty, statutory or otherwise, is limited to the repair or replacement at the
MILLER factory, or at a point designated by MILLER, of such part or parts as shall appear upon inspection
by MILLER to be defective in material or workmanship. New or remanufactured parts will be used for any
replacement at MILLER's option. This warranty is not transferable. This warranty does not obligate MILLER
to bear the cost of labor or transportation charges in connection with the repair or replacement of any parts
found to be defective, nor shall it apply to a product upon which repairs or alterations have been made unless
authorized by MILLER.
EXCEPT AS EXPRESSLY SET FORTH IN THIS WARRANTY, MILLER MAKES NO OTHER WARRANTY,
EXPRESS OR IMPLIED, AND HEREBY DISCLAIMS ALL OTHER WARRANTIES INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. MILLER shall in no event be liable for claimed downtime, claimed loss of profits or goodwill, or
any other special, incidental, indirect, or consequential damages concerning or relating to any product or parts,
whether based on negligence, strict liability, breach of contract, breach of warranty, misrepresentation or any
other legal theory, regardless of whether the loss resulted from any general or particular requirement which
MILLER knew or had reason to know about at the time of sale.
MILLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, AS TO THE FINISHED PRODUCTS
MANUFACTURED OR SUPPLIED BY ANOTHER MANUFACTURER AND SUPPLIED BY MILLER TO
PURCHASER, including, but not limited to, any vehicle to which a MILLER product may be affixed or any accessories
or wire rope, and MILLER EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE AS TO SUCH EQUIPMENT OR PRODUCTS. This language
shall in no way affect or diminish the rights of the purchaser to rely on such warranties as are extended by
such manufacturers or suppliers. MILLER shall, to the extent permitted under applicable law, pass on to the
purchaser such manufacturer's or seller's warranty.
MILLER, whose policy is one of continuous improvement, reserves the right to improve its products through
changes in design or materials as it may deem desirable without being obligated to incorporate such changes
in products previously sold. This warranty is not intended to cover or include the following items, which are set
forth by way of example and not limitation:
A.Normal deterioration of trim, paint, lettering, and appearance items due to wear or exposure to weather,
road conditions, road treatments, etc.
B.Any damage or defect due to accident, misuse, abuse, improper or unauthorized repairs, failure to provide
reasonable and necessary maintenance, or uses for which the equipment was not designed or intended.
C.Alterations or modifications that affect performance, operation or reliability.
D.Normal maintenance parts including, but not limited to, wear pads, bushings, wire rope, mud flaps,
fenderettes, light bulbs, hydraulic oil, filters, and tow sling belts.
IT IS EXPRESSLY UNDERSTOOD THAT MILLER MAKES NO IMPLIED WARRANTY THAT MILLER
PRODUCTS SHALL BE FIT FOR THE PURPOSE OF LIFTING OR MOVING PEOPLE OR FOR ANY OTHER
IMPROPER USE.
Miller Industries Towing Equipment Inc.
8503 Hilltop Drive
Ooltewah, Tennessee 37363
Telephone (423) 238-4171
SERIAL NUMBER
OWNER, USER AND OPERATOR:
We appreciate your choice of our towing and recovery unit for your application. Our number one priority is
user safety which is best achieved by our joint efforts. We feel that you can make a major contribution to
safety if you, as the equipment owner and operator:
1.Comply with Federal, State, and Local Regulations.
2.Read, Understand, and Follow the Instructions in this Manual.
3.Use Good, Safe Work Practices in a Common Sense Way.
4.Only have Authorized and Trained Personnel performing maintenance on the Towing and Recovery
Unit.
© 2010 MILLER INDUSTRIES TOWING EQUIPMENT INC. All rights reserved. Reproduction or use, without express permission, of editorial or
pictorial content, in any manner, is prohibited.
i
TABLE OF CONTENTS
It is assumed by the manufacturer that the Owner/Operator has a thorough knowledge of the accepted and lawful
retrieval and towing methods as dictated by his city, county or state. The manufacturer rejects any liability claim that
may result from the incorrect or unlawful application of its equipment.
Section I - PARTS
SUBFRAME ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-2 & I-3
BODY ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-4 thru I-7
RECOVERY BOOM ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-8 thru I-11
WHEEL LIFT BOOM ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-12 & I-13
CROSSBAR & OUTER CROSSTUBE ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-14 & I-15
BOOM & WHEEL LIFT HYDRAULICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-16 & I-17
PUMP, VALVE & FILTER HYDRAULICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-18 & I-19
CONTROL ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-20 & I-21
BOOM SWIVEL ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-22
ii
Section VI - PARTS
This Section is provided by the manufacturer for the purpose of ordering any component part of the Vulcan 806
that may be required when part replacement is necessary. Be certain to use only original equipment replacement
parts for warranty purposes as well as for keeping your unit in its original state and optimum operating capacities.
When ordering replacement or spare parts be sure to provide the following information to the manufacturer's Parts
Department.
1.
2.
3.
4.
5.
6.
7.
Manual Number & Date of Publication
Manual Page Number
Page Title
Reference Number of Part Desired
Part Number
Part Description
Quantity of Part Desired
Providing this information will help ensure that the correct parts will be delivered to you in an expedient manner
without delay. Should additional information be required for repair or replacement of certain components, contact
your Wrecker Manufacturer Authorized Representative.
The Manufacturer reserves the right, without notice or obligation, to improve or modify their products, which may
change the specifications, models and feature availability.
I-1
Section I - PARTS (cont'd)
SUBFRAME ASSEMBLY
I-2
Section I - PARTS (cont'd)
SUBFRAME ASSEMBLY
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
PART NUMBER
0301671
0301895
0302179
0303385
0306680
0307383
0307575
0400066
0400078
0400109
0400122
0400126
0400132
0400140
0400146
0400177
0400237
0400367
0400382
0400392
0400408
0400451
0400463
0400480
0400492
0400498
0401000
0712380
0719519
0719520
0722941
0806850
0807183
0807232
0807328
0807330
0807331
0807437
0807483
0807484
0807707
0910008
9043973
9056150
805040011
BA0259
DESCRIPTION
TOW SOCKET
GREASE FITTING, 1/8 NPT STRAIGHT
VALVE, 5 SPOOL
JUNCTION BOX
RUBBER "T" MOUNTS
CHAIN ASSEMBLY, 5/16" G7 X 12'
LIFT CYLINDER
1/4-20 X 3/4 HHCS GR.5,ZP
1/4-20 x 2 HHCS GR5 ZP
5/16-18 X 1 HHCS GR.5,ZP
3/8-16 X 1 1/4 HHCS GR.5,ZP
3/8-16 X 1 HHCS GR.5,ZP
3/8-16 X 1 1/2 HHCS GR.5,ZP
3/8-16 X 4 HHCS GR.5,ZP
3/8-16 x 2-1/4 HHCS GR.5 ZP
1/2-13 X 1 1/4 HHCS GR. 5, ZP
1/2-13 x 4 HHCS GR 5 ZP
1/4-20 NYLOCK HEX NUT ZP
5/16-18 NYLOCK HEX NUT ZP
3/8-16 NYLOCK HEX NUT ZP
1/2-13 NYLOCK HEX NUT ZP
1/4 FLAT WASHER ZP
5/16 FLAT WASHER ZP
3/8 FLAT WASHER ZP
1/2 FLAT WASHER ZP
WASHER, 1/2' ID X 2" OD X .150
SCREW, 1/2"-13 X 2" BUTTON HEAD SKT
"D" RING
SHIM - BOOM PIVOT ( .0747 THICK )
SHIM- BOOM PIVOT (.1196 THK)
BRACKET - JUNCTION BOX STAND
VALVE MOUNTING BRACKET WELDMENT
BOOM PIVOT PIN WELDMENT
FRONT BODY MTG.TUBE WELD'T
880 SUBFRAME -NEW CONV
SCOOP STORAGE WELD'T LH
SCOOP STORAGE WELD'T RH
REAR BODY MTG TUBE WELD'T
LH "D"-RING BRACKET
RH "D"-RING BRACKET
PIN WELDMENT
HYDRAULIC TANK ASSEMBLY
SCREW, 5/16"-16 X 1-1/2" FL HD SKT
RETAINING RING, 1-1/2"
VERTICAL BOOM GUIDE
PIN, 'D' RING
I-3
QTY
1
2
1
1
4
1
2
8
2
8
2
6
2
3
1
4
4
10
19
11
14
2
8
15
4
8
6
2
2
2
1
1
1
1
1
1
1
1
1
1
2
1
8
1
2
2
Section I - PARTS (cont'd)
BODY ASSEMBLY
I-4
Section I - PARTS (cont'd)
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
BODY ASSEMBLY
PART NUMBER
0303120
0306680
0310148
0310214
0310215
0310353
0310354
0310355
0310356
0400126
0400132
0400133
0400392
0400480
0400482
0400484
0400686
0400688
0400689
0400690
0400823
0400824
0400825
0402020
0402032
0402110
0402111
DESCRIPTION
PADDLE LATCH W/GASKET
RUBBER "T" MOUNTS
BOOT - CONTROL HANDLE
LAMP, LED SIDE MARKER (AMBER)
LAMP, LED SIDE MARKER (RED)
LIGHT, AGROLUN LH STOP/TAIL
LIGHT, AGROLUN RH STOP/TAIL
LIGHT, AGROLUN LH BACK-UP
LIGHT, AGROLUN RH BACK-UP
3/8-16 X 1 HHCS GR.5,ZP
3/8-16 X 1 1/2 HHCS GR.5,ZP
3/8-16 X 3 HHCS GR.5,ZP
3/8-16 NYLOCK HEX NUT ZP
3/8 FLAT WASHER ZP
3/8 HELICAL LOCK WASHER ZP
3/8 X 1-3/4 X 1/8 THICK FLAT WASHER ZP
#10-24 X 1" PAN HEAD PHILLIPS
#10-24 NYLOCK HEX NUT SS
SCREW, #8-32 X 1/2" FL HD PH MACH
NUT, #8-32 HEX NYLOK
5/16-18 X 3/4 LG HHCS SS
5/16-18 X 3/4 LG HHCS SS
3/8-16 X 3/4 SS HHCS 1/4-20 X 3/4 HHCS SS
5/16 X 1 HHCS SS
1/4 FLATWASHER 316 STAINLESS
1/4 LOCKWASHER 316 STAINLESS
I-5
QTY
2
2
10
2
4
2
2
1
1
16
6
2
23
27
9
2
12
12
12
12
30
2
3
18
29
2
18
Section I - PARTS (cont'd)
BODY ASSEMBLY (cont'd)
I-6
Section I - PARTS (cont'd)
BODY ASSEMBLY (cont'd)
ITEM
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
PART NUMBER
0402116
0402117
0402118
0402120
0402121
0719710
0719921
0721514
0721694
0722062
0807319
0807320
0807326
0807347
0807348
0807349
0807350
0807351
0807417
0807418
9032053
804500001
806070010
891000001
942480006
945400800
GV57
DESCRIPTION
QTY
5/16"-18 NC HEX NYLOK NUT SS
22
5/16 FLATWASHER 316SS
53
5/16 HELICAL LOCK WASHER SS
45
3/8 FLATWASHER 316 SS
2
3/8 LOCKWASHER 316 STAINLESS
2
SPLIT HARNESS PLATE
4
BODY / SUBFRAME MTG. PLATE 2
TAIL LIGHT INSPECTION COVER PLATE
2
COVER- TOP FRONT
1
PLATE - 5 FUNCTION CONTROL COVER
2
LH 94" WIDE DECK MTG. ANGLE WELDMENT 1
RH 94" WIDE DECK MTG. ANGLE WELDMENT 1
FRONT DECK MTG. CROSSMEMBER WELD'T 1
COVER TOP LH SIDE - 806 WRECKER
1
COVER TOP RH SIDE - 806 WRECKER
1
COVER - REAREND WELDMENT 1
SUPPORT BRKT WELD'T- TOP COVERS 1
COVER TOP INTERMEDIATE WELD'T- 1
LH S.S. BODY WELDMENT
1
RH S.S. BODY WELDMENT
1
GROMMET
2
MUD FLAP BACK-UP STRIP
2
MUD FLAP EXTENSION PLATE
2
MUDFLAP
2
WASHER PLATE
2
STRICKER PIN WELDMENT
2
RUBBER GROMMET 2
I-7
Section I - PARTS (cont'd)
RECOVERY BOOM ASSEMBLY
I-8
Section I - PARTS (cont'd)
RECOVERY BOOM ASSEMBLY
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
PART NUMBER
0300110
0300113
0300679
0302919
0306688
0306819
0307097
0307578
0307579
0307590
0400066
0400122
0400126
0400132
0400133
0400149
0400196
0400204
0400382
0400392
0400410
0400416
0400426
0400451
0400452
0400464
0400480
DESCRIPTION
SNAP RING, 1"
GREASE FITTING, 1/4-28 STRAIGHT
BEARING PAD, NYLATRON
FOLD CYLINDER
TIMBREN SPRING
PAD, SLIDE
HYDRAULIC MOTOR, PARKER
HYD CYLINDER, BOOM EXTEND
WINCH ASSEMBLY, HY-246 NARROW DRUM
PLUG, LDPE BLACK SQR-17-1014
1/4-20 X 3/4 HHCS GR.5,ZP
3/8-16 X 1 1/4 HHCS GR.5,ZP
3/8-16 X 1 HHCS GR.5,ZP
3/8-16 X 1 1/2 HHCS GR.5,ZP
3/8-16 X 3 HHCS GR.5,ZP
3/8-16 X 5/8 HHCS GR5 ZP
SCREW, 1/2"-13 X 1-1/4" SKT HD
1/2-13X3/4 SKT HD SET
5/16-18 NYLOCK HEX NUT ZP
3/8-16 NYLOCK HEX NUT ZP
NUT, 1/2"-13 HEX JAM ZP
1/2-13 NYLOCK HEX NUT GR.8, ZP
5/8-11 NYLOCK NUT GR.8 ZP
1/4 FLAT WASHER ZP
1/4 HELICAL LOCK WASHER ZP
5/16 HELICAL LOCK WASHER ZP
3/8 FLAT WASHER ZP
I-9
QTY
4
2
2
1
1
2
1
1
1
1
8
6
1
2
1
2
2
2
4
3
2
14
4
6
8
4
8
Section I - PARTS (cont'd)
RECOVERY BOOM ASSEMBLY (cont'd)
I-10
Section I - PARTS (cont'd)
RECOVERY BOOM ASSEMBLY (cont'd)
ITEM
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
PART NUMBER
0400482
0400491
0400497
0400614
0703082
0705499
0706668
0708519
0717069
0717674
0718218
0718219
0718527
0721649
0806843
0806844
0806846
0807436
0807707
0908627
9041403
9055275
9056150
805180000
896040002
HD0505
DESCRIPTION
3/8 HELICAL LOCK WASHER ZP
1/2 HELICAL LOCK WASHER ZP
1/2 FLAT WASHER GR.8,YZ PLATED
SCREW, 5/16"-18 X 3/4" ALLEN BTN HD CAP
PIVOT PIN - EXT CYL, INNER BOOM
SHAFT, UPPER SPADE
SHIM, WINCH MOUNTING
PLATE, ACCESS COVER PIN - MIDNIGHT U/L
SHIM - PAD SPACER
PIN - FOLD (BASE)
PLATE - PAD CAGE
COVER - HOSE TRACK
CABLE GUIDE - FRONT
INNER BOOM WELDMENT, EXPRESS
SHEAVE HEAD WELDMENT
WINCH BUCKET WELDMENT
806 OUTER BOOM WELDMENT
PIN WELDMENT
WINCH FREE-SPOOL ASSY
1/2-13 X 1-1/2 HHCS GR 8 ZP
SNAP RING, 2-3/4" EXTERNAL
RETAINING RING, 1-1/2"
SHEAVE HOUSING ASSEMBLY
NYLATRON PAD
SHOULDER BOLT, 5/8"-11 X 1-1/2" SKT HD
I-11
QTY
11
2
28
4
1
1
2
1
1
2
1
1
1
2
1
1
1
1
2
1
14
1
2
1
2
4
Section I - PARTS (cont'd)
WHEEL LIFT BOOM ASSEMBLY
I-12
Section I - PARTS (cont'd)
WHEEL LIFT BOOM ASSEMBLY
ITEM
PART NUMBER
3012-794003
3012-794004
0300113
0301397
0301825
0306942
0400121
0400122
0400139
0400152
0400154
0400217
0400398
0400482
0400491
0400492
0718216
0718528
0718949
0806842
0807027
0807082
9056150
807500001
896040002
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
DESCRIPTION
BAR - SPACER
PLATE - UL PAD CAGE
GREASE FITTING, 1/4-28 STRAIGHT
GREASE FITTING, 90 DEG
CYLINDER HYDRAULIC EXTEND
CAST BRONZE BEARING- SLEEVE 1 1/2"
3/8-16NC X 3/4 HHCS GR. B
3/8-16 X 1 1/4 HHCS GR.5,ZP
SCREW, 3/8"-16 X 1-1/2" HEX SKT SET
SCREW, 3/8"-16 X 5/8" SKT HD SUNK
3/8-16 X 1/2 HHCS GR.5,ZP
1/2-20 X 1.00 HHCS GR8 ZP
3/8-16 NYLOCK HALF-NUT ZP
3/8 HELICAL LOCK WASHER ZP
1/2 HELICAL LOCK WASHER ZP
1/2 FLAT WASHER ZP
SHAFT- INNER TUBE CYLINDER
ANGLE - BOOM COVER
PLATE - XBAR POSITIONING
PIN WELDMENT
OUTER W/L BOOM WELDMENT
INNER UNDERLIFT BOOM WELDMENT
RETAINING RING, 1-1/2"
PIN - EXTEND
NYLATRON PAD
I-13
QTY
1
1
4
2
1
2
4
2
1
1
1
4
1
6
4
4
1
1
2
1
1
1
1
1
4
Section I - PARTS (cont'd)
CROSSBAR & OUTER CROSSTUBE ASSEMBLY
I-14
Section I - PARTS (cont'd)
CROSSBAR & OUTER CROSSTUBE ASSEMBLY
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
PART NUMBER
0300113
0400505
0718392
0806899
8600404
8600406
8602001
8700109
8700180
8700190
8701500
8701600
8800801
8800901
9012944
9030214
9043950
9043956
9045209
9047057
9052013
880411600
DESCRIPTION
GREASE FITTING, 1/4-28 STRAIGHT
5/8 FLAT WASHER SAE
CROSSBEAM PIVOT PIN
STINGER CROSSBEAM WELD'T
WASHER
WASHER - PIVOT PIN
LOCK PIN
SCOOP PIN
WHEEL RETAINER WELT'T
WHEEL RETAINER WELD'T
SCOOP BRACKET WELD'T
SCOOP BRACKET WELD'T
LH WHEEL GRID ASSY 880
RH WHEEL GRID ASSY 880
PIPE PLUG, 1" NPT SKT HD
O-RING
5/8-11X1-1/2
3/8 NC X 3/4 BUTTON HD ALLEN
5/8" BS FLAT WASHER NON-PLATED
DETENT SPRING
BALL, 1" CHROME
FRONT STOP PIN ASSY (CROSSBAR)
I-15
QTY
3
2
1
1
2
1
2
2
1
1
1
1
1
1
1
2
2
1
1
1
1
2
Section I - PARTS (cont'd)
RECOVERY BOOM & WHEEL LIFT HYDRAULICS
I-16
Section I - PARTS (cont'd)
RECOVERY BOOM & WHEEL LIFT HYDRAULICS
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
PART NUMBER
0300044
0301522
0301524
0301620
0301825
0301921
0302179
0302508
0302584
0302919
0302922
0303017
0307097
0307460
0307575
0307578
0307579
0307633
9012594
810770015
DESCRIPTION
CONNECTOR 6MJX8MB
CONNECTOR 6MJ-6MB
HOSE ASSEMBLY, 24" LG.
FITTING, ELBOW, 6MJ-6MB90
CYLINDER - EXTEND
HOSE ASSEMBLY, 128"
VALVE, 5 SPOOL
ELBOW, 8MJ-8MB90LL
HOSE ASSEMBLY, 50" FOLD CYLINDER
HOSE ASSEMBLY, 170"
CONNECTOR 8MBX6FB
HYDRAULIC MOTOR, PARKER
FITTING, ELBOW, 6MJ-6MB90L
LIFT CYLINDER
HYD CYLINDER, BOOM EXTEND
WINCH ASSEMBLY, HY-246 NARROW DRUM
HOSE ASSEMBLY FITTING, HYD RUN TEE, 6MJ-6MB-6MJ
HOSE ASSEMBLY, 29"
I-17
QTY
3
7
2
4
1
2
1
2
2
1
2
8
1
4
2
1
1
2
2
2
Section I - PARTS (cont'd)
PUMP, VALVE & FILTER HYDRAULICS
I-18
Section I - PARTS (cont'd)
PUMP, VALVE & FILTER HYDRAULICS
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
PART NUMBER
0300011
0300056
0300071
0300692
0301376
0301471
0301767
0301780
0302757
0302761
0310462
0400118
0400464
0400748
0702540
0807297
9011011
9012839
9018131
9018399
880010023
DESCRIPTION
VALVE, 4 SPOOL CONTROL
BARB, 16C4-16MP
HOSE CLAMP, 1"
STREET ELBOW, 1" 90°
CONNECTOR 8MJX10MB
HOSE ASSEMBLY - 30" LG
BARB, 16C4-16FJX
CONNECTOR, 8MJ-12MB
CONNECTOR, 8MJ-12MB
ELBOW, 16MJ-16MB45
MAGNETIC HEX PLUG ~ 3/4 NPT
5/16-18 X 3/4 HHCS GR.5 ZP
5/16 HELICAL LOCK WASHER ZP
SCREW, 5/16"-18 X 1/4" HEX SKT SET
SUCTION HOSE, 12 FT (1" ID)
HYDRAULIC TANK WELDMENT
PIPE PLUG, 1/4" SQ HD
PLUG 1" (HYDRAULIC) HEX HEAD
BREATHER CAP
IMMERSION FILTER ASSEMBLY
HOSE ASSEMBLY-103"
I-19
QTY
1
1
2
1
1
1
1
1
2
1
1
2
2
2
2
1
1
1
1
1
1
Section I - PARTS (cont'd)
CONTROL ASSEMBLY
I-20
Section I - PARTS (cont'd)
CONTROL ASSEMBLY
ITEM
PART NUMBER
3014-791012
0300834
0300835
0300837
0301397
0302856
0302917
0307634
0307772
0307823
0307824
0400070
0400078
0400365
0400367
0400393
0400451
0400458
0400527
0721658
0722377
0722380
0806852
9053524
HD0900
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
DESCRIPTION
CLEVIS - DUAL CTRL CABLE
KNOB, CABLE (IN-OUT)
KNOB, BOOM (UP-DN)
KNOB, BOOM (IN-OUT)
GREASE FITTING, 90 DEG
KNOB, TILT (UP-DN)
KNOB, WHL LIFT EXT (IN-OUT)
CONTROL CABLE 64" LG
3/4 PLUG
CLAMP CUSHION
CLAMP COVER PLATE
1/4-20 X 1 HHCS GR5 ZP
1/4-20 X 2 HHCS GR5 ZP
HEX NUT, 1/4"-28
1/4-20 NYLOCK HEX NUT ZP
3/8"-16 HEX JAM NUT
1/4 FLAT WASHER ZP
1/4 STAR LOCKWASHER ZP
CLEVIS PIN, 5/16" X 5/8" COTTERLESS
ROD CONTROL HANDLE PIVOT
PLATE- CONTROL HANDLE MOUNTING
SPACER
CONTROL HANDLE WLMT
BRONZE BUSHING (.752 X .879 X .750)
BEARING, ROD END, 1/4-28
I-21
QTY
1
2
2
2
10
2
2
10
4
4
4
10
4
14
14
8
10
14
1
2
2
2
10
20
10
Section I - PARTS (cont'd)
BOOM SWIVEL ASSEMBLY
ITEM
1
2
3
4
5
6
PART NUMBER
0300113
9056098
804181500
805180001
805180002
852060100
DESCRIPTION
GREASE FITTING, 1/4-28 STRAIGHT
SNAP RING, 1"
SHEAVE HOUSING CASTING
SHEAVE SHAFT
SHEAVE CASTING
CABLE GUIDE CASTING
I-22
QTY
1
2
1
1
1
1
NOTES
Miller Industries Towing Equipment Inc.
8503 Hilltop Drive • Ooltewah, Tennessee 37363 • (423) 238-4171
www.millerind.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement