RTS SERIES LOUDSPEAKERS SERIES CONSISTENTLY SUPERIOR HOME THEATER PERFORMANCE

RTS SERIES LOUDSPEAKERS SERIES CONSISTENTLY SUPERIOR HOME THEATER PERFORMANCE
RTS SERIES LOUDSPEAKERS
SERIES CATALOG
CONSISTENTLY SUPERIOR HOME THEATER PERFORMANCE
2
WWW.POLKAUDIO.COM
RTS SERIES LOUDSPEAKERS
LCi-RTS105, LCi-RTS100
Both the LCi-RTS105 and LCi-RTS100 feature a integrated
“perfect volume” performance enclosure to ensure superb
performance every time. Because the performance enclosure
is the same size as the cutout, each installs easily in a post
construction project.
Stud-Lock Mounting System™ (patent pending-sold
separately) creates a rigid platform for the LCi-RTS105,
increasing bass performance, clarity and reducing
unwanted structure borne vibration.
THX® Ultra 2-certified, so you’re assured of great
surround sound performance and exceptional
dynamic range.
Aerated polypropylene Dynamic Balance® cones
(two 5 1/4" drivers) have lower excursion rates
and therefore less distortion for better sound.
They are stiff yet lightweight for superb mid-range
clarity, punchy bass and high efficiency. These cones
are 20% lighter than conventional polypropylene
and 35% lighter than aluminum cones.
The Ring Radiator tweeter design, found in
freestanding speakers, delivers smooth,
extended highs with excellent accuracy and
astonishing detail. A redesigned faceplate
geometry refines off-axis characteristics.
LCi-RTSF/X®, LCi-RTSC
Like the other models in the LCi-RTS Built-In Series, these new
loudspeakers have been “engineered for predictably superior
home theater performance.” Both models feature technologies
used in Polk’s critically acclaimed LSi Series of freestanding
speakers to deliver the sound quality of stand-alone models.
LCi-RTS105
OVERALL DIMENSIONS:
21 3/4" H X 12" W X 3 11/16" D (55.2CM H X 30.4CM W X 9.4CM D)
OVERALL FREQUENCY RESPONSE 50Hz - 27kHz.
Integrated Performance Enclosure—(LCi-RTSF/X) This feature
is the same proven integrated “perfect volume” performance
enclosure found on the LCi-RTS105.
Stud-Lock Mounting System™ (LCi-RTSF/X) creates a rigid
platform, improving bass performance, clarity and
reducing unwanted structure-borne vibration.
THX® Ultra2 certified, so you’re assured of great surround
sound performance and exceptional dynamic range.
Aerated Polypropylene Dynamic Balance cones possess
an ideal balance of stiffness, damping and low mass
for superb clarity, detail and high efficiency.
Ring radiator tweeter design, found in freestanding
speakers, delivers smooth high frequency extension
with excellent clarity and detail.
LCi-RTS100
OVERALL DIMENSIONS:
14" DIAMETER X 8 3/4" DEPTH (35.6CM DIAMETER X 22.2CM DEPTH)
OVERALL FREQUENCY RESPONSE 50Hz - 27kHz.
SEE SPECIFICATIONS FOR MORE DETAILED PRODUCT INFORMATION.
MATTE WHITE (PAINTABLE)
Cascade Tapered Array—(LCi-RTSC) employs two 5 1/4"
APP cone drivers. One driver plays only bass frequencies,
the other bass and midrange, for broad, even sound
coverage for off-axis listeners.
Rigid MDF Performance Enclosure (supplied with LCi-RTSC)
helps ensure predictable high performance as it maximizes
sound isolation with adjacent rooms.
Two grilles—One cloth grille for maximum sonic performance,
one aluminum mesh for a more traditional appearance.
Room Environment Controls—Refined Wall Distance
(LCi-RTSF/X) lowers output only in the low-midrange/upper
bass to eliminate “boomyness.”
Tweeter attenuation switches (LCi-RTSF/X & LCi-RTSC) engage
a pass-band filter to compensate for overly reflective rooms,
decreasing unwanted glare and harshness without
decreasing the high-end frequencies.
Solid/diffuse switch (LCi-RTSF/X) affords greater placement
flexibility for the surround effect you desire.
LCi-RTSF/X
OVERALL DIMENSIONS:
21 13/16" H X 12" W X 4 1/4" D (55.3CM H X 30.5CM W X 10.8CM D)
OVERALL FREQUENCY RESPONSE 50Hz - 27KHz.
LCi-RTSC
OVERALL DIMENSIONS:
8 15/16" H X 15 5/8" W X 4 " D (22.60CM H X 39.7CM W X 9.4CM D)
OVERALL FREQUENCY RESPONSE 50Hz - 27kHz.
SEE SPECIFICATIONS FOR MORE DETAILED PRODUCT INFORMATION.
MATTE WHITE (PAINTABLE)
LCi-RTS105
polk
technology
LCi-RTS100
DYNAMIC BALANCE®
Advanced laser imaging technology allowed Polk Audio engineers to see the entire vibrating surface of a driver
and tweeter; they could actually see the resonance develop on the speaker cones—resonance that is the root
cause of loudspeaker distortion (A). Being able to see the resonance develop, they determined the “Dynamic
Balance” of high-tech materials, geometry and construction that effectively tune out the offending resonance (B).
Exclusive Dynamic Balance Composite Material Technology delivers sound |that’s effortlessly clean and clear,
even at lifelike volume. See more about Dynamic Balance at www.polkaudio.com/catalog/technology/.
LCi-RTSF/X
A
B
LCi-RTSC
RING RADIATOR TWEETER
The Ring Radiator Tweeter, usually found only in speakers costing thousands more than
Polk speakers, gives the LCi Series its incredible accuracy and astonishing detail, to reveal
the nuances of your favorite CDs, high definition discs and LPs. The ultra-light woven ring
radiator diaphragm is supported at two hinge points (A & B) and is driven by a centrally
positioned voice coil (C). With a higher ratio of supported material than conventional
tweeters, there’s less opportunity for performance-robbing resonance to develop. This
remarkable tweeter delivers accurate high frequencies with precise detail and wide
dispersion. See more about The Ring Radiator at www.polkaudio.com/catalog/technology/.
polk
technology
B
A
C
3
RTS SERIES LOUDSPEAKERS
PRODUCT SPECIFICATIONS
CUSTOM INSTALL
LOUDSPEAKERS
LCi-RTS105
LCi-RTS100
Driver Complement
2 - 5 1/4" (13.3cm) Aerated Polyproylene
2 - 5 1/4" (13.3cm) Aerated Polyproylene
Dynamic Balance mid/bass drivers,
Dynamic Balance mid/bass drivers,
1 - 1" (2.5cm) Ring Radiator tweeter
1 - 1" (2.5cm) Ring Radiator tweeter
Shape
rectangle
round
Frequency Response: Overall / -3db
50Hz - 27kHz / 80Hz - 26kHz
50Hz - 27kHz / 80Hz - 26kHz
Impedance
compatible with 4 Ohms outputs
compatible with 4 Ohms outputs
Recommended Amplification
10 - 250 Watts/channel
10 - 200 Watts/channel
Efficiency
92dB
92dB
Available Finish
matte white (paintable)
matte white (paintable)
Product Weight / Shipping Weight
12.5 lbs /16.60 lbs each
12.5 lbs /17.0 lbs each
(5.7 kg / 7.5 kg each)
(5.7 kg / 7.7 kg each)
Overall Dimensions (Depth measured from
21 7/8" H x 12" W x 3 11/16" D
14" Diameter x 8 3/4" Depth
the deepest component to the back of the baffle)
(55.56cm H x 30.4cm W x 9.4cm D)
(35.6cm Diameter x 22.2cm Depth)
Depth assuming 1/2" Drywall
3 1/4" (8.25cm)
8 1/4" (20.6cm)
Cutout Dimensions
20 1/8" H x 10 5/8" W
12 1/2" Diameter x 8 3/4" Depth
(51.12cm H x 27cm W)
(31.8cm Diameter x 22.2cm Depth)
Features
Stud-Lock Mounting System,
Stud-Lock Mounting System,
THX Ultra2 certified,
THX Ultra2 certified,
Room Environment Controls
Room Environment Controls
LCi-RTSF/X
2 - 3 1/2" Diameter (8.89cm) Aerated
Polypropylene Dynamic Balance driver cones,
1 - 6 1/2" Aerated Polypropylene Dynamic
Balance driver cones,
2 - 3/4" Diameter (1.91cm) Ring Radiator tweeters
LCi-RTSC
2 - 5 1/4" Diameter (13.34cm) Aerated
Polypropylene Dynamic Balance driver cones,
1 - 1" Diameter (2.54cm)
Ring Radiator tweeter
Frequency Response: Overall / -3db
Impedance
50Hz - 27kHz / 80Hz - 26Hz
4 Ohms
50Hz - 27kHz / 80Hz - 26Hz
4 Ohms
Recommended Amplification
Efficiency
10 - 250 Watts/channel
88 dB
10 - 250 Watts/channel
92 dB
CUSTOM INSTALL
LOUDSPEAKERS
Driver Complement
Available Finish
matte white (paintable)
matte white (paintable)
Product Weight / Shipping Weight
10.75 lbs each / 36.8 lbs pair
8.7 lbs / 36.65 lbs each
(4.88 kg each/ 16.69 kg pair)
(3.97 kg / 10.73 kg each)
Overall Dimensions (Depth measured from
12" W x 21 13/16" H
15 5/8" W x 8 15/16" H
the deepest component to the back of the baffle)
(30.5cm W x 55.3cm H)
3 3/4" (9.5cm)
10 3/4" W x 20 1/4" H
(27.31cm W x 51.5cm H)
4 1/4" (10.8cm)
heavy duty spring loaded terminals
(39.7cm W x 22.60cm H)
2 7/8" (7.3cm)
13 1/8" W x 7 5/8" H
(33.34cm W x 19.5cm H)
3 3/8" (8.57cm)
heavy duty spring loaded terminals
Depth assuming 1/2" Drywall
Cutout Dimensions
Overall Depth
Inputs
We’re fanatics when it comes to providing you useful, accurate information that can help you evaluate our products. But as we all know,
we live in an imperfect world. At least some of us do. That’s why performance specifications and product dimensions are subject to
change without notice. For the most current specifications see our website, www.polkaudio.com/home.
Polk Audio is a Directed Electronics company which trades on NASDAQ under the symbol DEIX. Investor information can be found at
http://investor.directed.com.
Polk Audio, Polk, PowerPort, Dynamic Balance, F/X, Atrium, Big Speaker Sound Without The Big Speaker, High Velocity Compression Drive,
Acoustic Resonance Control, ARC Port, Casket Basket, I-Sonic, SurroundBar & SDA are registered trademarks of Britannia Investment
Corporation used under license by Polk Audio, Incorporated. Polk Audio Designs & miDock are trademarks of Britannia Investment
Corporation used under license by Polk Audio, Incorporated.
POLK AUDIO
5601 METRO DRIVE
BALTIMORE, MD 21215
WWW.POLKAUDIO.COM
CUSTOMER SERVICE:
800-377-7655 (USA & CANADA)
410-358-3600 (WORLDWIDE)
COPYRIGHT© APRIL 2008
ALL RIGHTS RESERVED.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement