- No category
advertisement
MAGUIRE
Product Technical Data Sheet
WSB 420
Gravimetric Blender
Design
The Maguire Weigh Scale Blender™ (WSB) range of gravimetric batch blenders are for all plastics converting businesses for all types of extrusion applications, and also all Injection and Blow
Moulding applications.
The WSB 420 is part of the 400 Series range con- sisting of 1 hopper fitted with 2 material compart- ments.
Operation
Each material is dosed by a stainless steel slide gate. The slide Gate is capable of dosing a wide ranger of settings, from as little as 1% to 100%, based on an average density free flowing material
(0.65 BD).
Control
The WSB Controller has 124 standard features and functions that technically make it lead the industry regarding blending control.
The hoppers are mounted above the Weigh Bin with a default 4000g batch size.
In normal operation the system tares the weight of the weigh bin and then each material is dispensed -
Regrind, Natural, Colour and Additive in sequence, weighing each material after each dispense confirm- ing material required before moving on to the next material.
The complete batch is released into the mixing chamber, and mixed with the previous batch to en- sure a homogenous mix.
Material blending is controlled by a level sensor mounted in the upper part of the mix chamber.
Key to this is the continuous calibration of mate- rials ensuring accurate dispenses of every mate- rial within the blend.
The Controller every dispense updates the gram/second flow rate of each material, ensur- ing consistent accuracy.
Settings are made easily by either user friendly thumbwheels, or entering settings directly on the keypad.
For special functions these can be easily ac- cessed and set via the password protected key- pad.
When the sensor is covered the blender will not dispense any further batches. The level of material in the mix chamber is critical to good mixing.
There is audible alarm and strobe light with si- lence function, should a batch be incomplete, for example running out of additives or master- batches.
As material in the mix chamber is consumed the sensor is uncovered and then the blender then commences the next cycle.
Setup and Operation reports can be printed di- rect to a USB key.
Data is also available via Ethernet or serial ports, allowing remote access and monitoring to download settings and check job progress.
Integration to other control or ERP systems can be made via leading fieldbuses or OPC interfaces
MAGUIRE
Product Technical Data Sheet
Dimensions
WSB 420
Gravimetric Blender
Key Features
Ideal for Large processing machines
Reduced weight and footprint
Overall precision of ±0.1% of specified blend
Technical Data
Model
Maximum Throughput**
WSB 420
550kg/h to 650kg/h
1,115lb/h to 1,430lb/h
2
Compressed air gun for quick cleanout included
Easy access to all material contact surfaces of the machine including hoppers, weigh bin, and mixing chamber permits rapid colour change without the use of tools
Number of Materials
Material Dispense
Systems
Weight
Power Supply
2-3” Round Slide Gate
124kg 265lb
120vac - 4.8 Amp
230vac - 2.7 Amp
Proprietary microprocessor-control technology monitors and confirms the weight of each ingre- dient / touch-screen optional.
Compensation is made when a variation in dis- pense weight is detected
Vibration Weighing management
Operating Air Pressure
Air Consumption
4-6 Bar 60-90psi
0.3 m³/hr 0.17cfm
** Throughput achieved is influenced by number of materials, how well they flow, vibration and load- ing consistency - each can effect maximum output of a blender, which in turn effects sizing the cor- rect blender required for an application.
Improved documentation capabilities
5 Year Warranty
Distributed by
Dri-Air Industries
Shipping Weight 127Kg 280lb
H x W x D
137 x 87 x 80cm
54 x 34 x 31.5in
Maguire reserves the right to change technical data without prior notice
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project