8450 14 V.1 Technical Data Sheet Permasolid® HS Diamond Clear Coat 8450 ® Permasolid HS Diamond Clear Coat 8450 is a National Rule compliant, high quality clear coat. This clear is used to repair vehicles which in production are coated with clear coats of higher scratch resistance. It is easy to spray in 1 ½ coat or 2 coat application, has excellent flow and leveling and is easy to polish. ® ® Permasolid HS Diamond Clear Coat 8450 uses Permasolid VHS Hardener 3240 Slow. This product is for professional painting of vehicles only. Technical Data Sheet No. 8450/11/06 Apr. 2014 2014 Axalta Coating Systems, LLC and all affiliates. All rights reserved. 8450 14 V.1 Suitable Substrates: ® Permacron Series 293/295 ® Permahyd Hi-TEC 480 Fully cured OEM or existing topcoat (non-reversible) Mixing Ratio: ® 3:1 by volume with Permasolid VHS Hardener 3240 Slow. ® ® ® Reducer: Permacron Dura plus 8580, Permacron Reducer 3363 Medium, or Permacron Reducer 3365 Slow Pot Life: Ready for Spraying approx. 1 ½ - 2 hour at 68°F/20°C. Method of application HVLP Approved Transfer Efficiency Please refer to gun manufacturer and local legislation for proper spray pressure recommendations. Spray Nozzle Application viscosity 4mm, 68°F/20C, DIN 4 1.3 - 1.4mm 1.2 - 1.3mm Mixing viscosity 1 ½ coat application: 18 - 20 seconds 2 coat application: 16 - 18 seconds Reducer at 68°F/20C material temperature Number of coats ® Up to 5% Permacron Reducers. 1 medium coat followed by 1 full coat without intermediate flash-off. 2 coats with approx. 5 to 15 minutes intermediate flash-off. Recommended film thickness: 2.0 – 2.5 mil dry film thickness Air Drying At 68F/20C: Dust free Dry for assembly Dry through 70 to 80 minutes. 4 to 6 hours 12 hours Low Bake Flash-off time: Drying time at 140F/60C metal temperature: approx. 5 - 15 minutes 30 - 35 minutes 2014 Axalta Coating Systems, LLC and all affiliates. All rights reserved. 8450 14 V.1 Important Regulatory Information Please see the appropriate VOC wall chart for compliance for your area. The values depicted below are “ready to spray.” VOC Category VOC (ap/le) Gallon Weight Wt% Volatiles, Water & Exempts Vol% Solids Clear Coat 442 g/l, 442 g/l 8.25 lbs/gal 44.7%, 0.0%, 0.0% 48.1% For industrial use only by professional, trained painters. Not for sale to or use by the general public. Before using, read and follow all label and MSDS precautions. If mixed with other components, mixture will have hazards of all components. Ready to use paint materials containing isocyanates can cause irritation of the respiratory organs and hypersensitive reactions. Asthma sufferers, those with allergies and anyone with a history of respiratory complaints must not be asked to work with products containing isocyanates. Do not sand, flame cut, braze or weld dry coating without a NIOSH approved air purifying respirator with particulate filters or appropriate ventilation, and gloves. Any analytical results set forth herein do not constitute a warranty of specific product features or of the product’s suitability for a specific purpose. All products are sold pursuant to our general conditions of sale. We hereby disclaim all warranties and representations, express or implied, with respect to this product, including any warranty of merchantability or fitness for a particular purpose. This product is protected by patent law, trademark law, copyright law, international treaties and/or other applicable law. All rights reserved. Unauthorized sale, manufacturing or use may result in civil and criminal penalties. SPIES HECKER, INC. 47818 West Anchor Court Plymouth, MI 48170 Tel. 800-447-7437 (800-44-SPIES) Fax 734-354-3405 www.SpiesHeckerUSA.com 2014 Axalta Coating Systems, LLC and all affiliates. All rights reserved.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project