C
ROSS
T
ECHNOLOGIES, INC.
DATA SHEET
REV E
06/10/09
2017-64 Up/Downconverter, C-Band, Common LO
The 2017-64 C-band Up/Downconverter converts 70 MHz to 5.85-6.425 GHz (Up) and 3.625-4.2 GHz to 70 MHz (Down) in 0.125 MHz steps with low group delay and flat frequency response. A common synthesized local oscillator (LO) provides frequency selection for the Up and Down converter simultaneously. Multi-function push button switches select the RF frequency, gain, and other parameters.
Front panel LEDs provide indication of DC power (green), PLL alarm for up and downconverters (red), remote operation (yellow), and
Upconverter mute (yellow). Gain can be manually controlled over a 0 to +30 dB range for the upconverter and over a +30 to +50 dB range for the downconverter as adjusted by the front panel multi-function push-button switches. Remote operation allows selection of frequency and gain. Parameter selection and frequency and gain settings appear on the LCD display. Connectors are BNC female for
IF and the optional external reference input and output, and N female for RF. A high stability (±0.01ppm) option is also available. It is powered by a 100-240 ±10% VAC power supply and housed in a 1.75” X 19“ X 16” 1RU chassis.
MODEL 2017
UP/DOWNCONVERTER
DOWNCONVERTER UPCONVERTER
U=6425.000 G=+10
D=4200.000 G=+30
MENU
C
ROSS
T
ECHNOLOGIES INC.
EXECUTE
ALARM REMOTE POWER MUTE ALARM
Front Panel
EQUIPMENT SPECIFICATIONS*
----------UPCONVERTER----------
Input Characteristics (IF)
Impedance/Return Loss 75Ω /18 dB
Frequency
Level
70 ± 18 MHz
-40 to -10 dBm
Output Characteristics (RF)
Impedance/Return Loss 50Ω/14 dB
Frequency 5.85 to 6.425 GHz
Level
1dB compression
Channel Characteristics
-20 to 0 dBm
+10 dBm
Gain range (adjustable) 0 to +30 dB, 1dB steps
Frequency Sense Non-inverting
--------UP and DOWNCONVERTER--------
Channel Characteristics
Frequency Response
Spurious Response
±1.5 dB, in band; ±0.5 dB, 36 MHz BW
<-50 dBC
Group Delay, max 0.015 ns/MHz 2 parabolic; 0.05 ns/MHz linear; 1 ns ripple
Synthesizer Characteristics
Frequency Accuracy
Frequency Step
± 0.01 ppm internal reference
1 MHz (125 kHz, option X)
Phase Noise @ Freq
dBC/Hz
100 Hz
-60
1kHz
-70
10kHz 100kHz
-80 -90
1 MHz
-100
Controls, Indicators
Freq/Gain Selection direct readout LCD; pushbutton switches or remote selection
Power; Alarm; Remote Green LED; Red LED; Yellow LED
Remote
Other
RS232C, 9600 baud (RS485, option Q)
RF Connector
IF Connector
10 MHz Connectors
N (female)
BNC (female)
BNC (female), 50Ω/75Ω (option E)
Alarm/Remote Connector DB9 - NO or NC contact closure on Alarm
Size 19 inch, 1RU standard chassis 1.75”high X 16.0” deep
Power 100-240 ± 10% VAC, 47-63 Hz, 45 watts max
---------DOWNCONVERTER---------
Input Characteristics (RF)
Impedance/Return Loss 50Ω /14 dB
Frequency 3.625 to 4.2 GHz
Noise Figure, max.
Level
1dB compression
15 dB (max gain)
-60 to -30 dBm
-10 dBm (min gain)
Output Characteristics (IF)
Impedance/Return Loss 75Ω/18 dB
Frequency
Output Level Range
70 ± 18 MHz
-15 dBm to +5 dBm
1dB compression
Channel Characteristics
+15 dBm
Gain range (adjustable) +30 to +50 dB
Image Rejection > 50 dB, min
Frequency Sense Non-inverting
Available Options
O - Frequency Reference Offset Adjust
Q - RS485 Remote Interface
T - Temperature Sensor
X- 125 kHz frequency steps
Connectors/Impedance
M - 50Ω N-type (RF), 50Ω BNC (IF)
*10˚C to 40˚C; Specifications subject to change without notice
C
ROSS
T
ECHNOLOGIES, INC.
6170 Shiloh Road, Alpharetta, Georgia 30005 • 770-886-8005, FAX 770-886-7964 www.crosstechnologies.com
