TELINK1

TELINK1
new
ELETTRONICA
TELINK
TELINK
Web Internet Interface
CONNECTION TO:
FEATURES
●
●
●
●
●
●
●
The TELINK is an interface endowed with a microcomputer with risc microprocessor and an operating
system specialized resident RTOS in the simultaneous management of data that transit trught 4 serial ports.
The TELINK opens the channel of telemetry standard RVR, available on connector DB9 and normally connected to the Telecon32 or to the modem, to systems of telemetry of station of high-level what ANTLAN,
BURK, SNMP.
Besides it has a Web resident Server that allows to be connected online ethernet and explored by a normal
browser type explorer or similar (function HTML). Besides it supports the messages E-mail to signal errors
of system. The protocols TCP / IP, Telnet, http, SNMP, XML / RSS, HTTPS / SSL / SSH is managed by a
DSP to 120Mhz inside to the TELINK.
The door Web Server can be connected online internet and medium a link dns the TELINK can be questioned with an univocal name of station rather than the IP address (example: from internet radio_rvr_spa.it
rather than xxx.xxx.xxx.xxx).
The TELINK is contained in a screening metallic playpen to easily install on bar omega; all the signals and
the feeding are endowed with connectors for a rapids substitution. The feeding is galvanic isolated and the
signals filtered for having a high immunity from the radio frequency troubles. The fuse is restoring auto and
the entry it foresees a varistore of protection from the extratensionis. The retention of the data in memory
dates is done with maxi life boundless capacitor rather than batteries to the NiCd that they ask for maintenance in the time.
In the façade there are nine led for a complete synoptic on the traffic of the serial lines and the diagnosis of
the typology of error with three red led. TELINK is endowed with watchdog hardware for automatic reset in
case of anomalous stop of the processor or lowering under the limit of the tension of feeding.
The TELINK is endowed with a formality “simulation” that it allows to a system ANTLAN or BURK to
regularly be connected to the TELINK reading some virtual (test of the protocol and the net) values
ELETTRONICA
General Descriptions
SPECIFICATIONS OF PRODUCT
The characteristics hardwares of the Telink are:
External
• 1 door seriale RS232 for connector connection dsub9poli Telecon32 RVR.
• 1 door RS485 with resistance of termination inserted for connection to the Telemetry ANTLAN,
BURK, to the driver SNMP.
• 1 door of expansion with dsub15poli of endowed Telink 10 I/Os configurabili
• 9 led of signaling for diagnosis feeding, serial traffic, errors of operation.
• 1 door RJ45 of planning RS232 of the TELINK (configuration) and upgrade of the firmware.
• 1 door RJ45 LAN 10/100Mbit ethernet with Web Server for connection standard PC
• 1 clamp to 2 poles for feeding 10-30VDC.
• 1 taking DC Power standard from feeder to thorn (alternative to the clamp 2 poles).
• 16 dipswiches for selection formality of operation.
Internal
• 1 port devoted of connection to the graphic display.
• 1 port I2C Bus.
• 1 port SPI.
• 1 port of expansion for coprocessor.
• 2 Maxi Capacitor for retention dates to long life.
• Jumper of closing resistances of termination RS485.
• Acoustic Buzzer.
• Feeding isolated galvanicamente.
• Fuse restoring auto.
• Varistor of protection in entry.
• Web Server with management E-mail of the alarms and external commands (optional).
• RTC with clock and date data retained (optional).
• Additional Eeprom 128Kbyte.
The scheme to blocks of the possible configurations of TELINK dip-switch selectable is the following:
Operational functions are:
ANTLAN
Single and Double ID
RS485
RVR
TRANSMITTER with
telemetry
TELINK RVR
RS485
RS232
RS232 Telecon32
BURK
RS485
WEB-Email
PC ethernet
RETE LAN
INTERNET
Email
SNMP Broadcast
RVR
RS485
LAN
• ANTLAN (you see protocol owner).
• BURK (you see protocol owner).
• SNMP Broadcast. with addition the card of interface SNMP RVR.
OPTION SNMP RVR
The interface SNMP Broadcasting is available using a form Telink connected to a board SNMP furnished by
RVR.
The interface can be furnished in forms for assemblage on bar din or in a rack from 1 unity that includes
both the forms with devoted power supply.
The scheme is the following:
TELECON32 DB9 RVR
TELINK
DRIVER
SNMP
RVR
SNMP LAN
• TELINK-C1: ANTLAN and BURK Telemetry connection interface
• TELINK-W1: ANTLAN, BURK and TCP-IP internet WEB Telemetry connection interface
These are general specifi cations. They show typical values and are subject to change without notice.
9
99/5/CE
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement