traffic barriers ACCESS CONTROL Hi-tech. Advanced. Multifaceted. These are some of the terms that best describe our diverse range of access control offerings. ACCESS CONTROL SYSTEMs SOLO Technical Specifications Standalone Proximity Access Control System Product Code: SOLO0001V1_AU Technical Data SOLO is designed for small standalone access control applications where security, cost and simplicity are important. This reader allows for easy programming of up to 50 user tags as well as selective, easy adding and deleting of users thanks to the reader’s exceptionally user-friendly LED-based interface. SOLO Input voltage 10V – 12V AC or 11V – 15V DC Current draw Quiescent 110mA Maximum 150mA Tag frequency Read range Main Features Mechanical Features • Optional secure link (SmartSwitch II) – additional security measure to prevent unauthorised access even if the unit is tampered with • Weatherproof reader • Optional anti-knock shield for reader Electronic features • 50 user tag memory – ideal for basic proximity access applications • Tags are encrypted and cannot be cloned 13.56MHz 80 – 100mm Reader dimensions (mm) • Output is configurable as follows: Surface-mount Width: 90mm x Depth: 30mm x Height:129mm Flush-mount Width: 86mm x Depth: 15mm x Height:124mm • Pulsed output configurable from 1 - 254 seconds Weight • Latched output Temperature range 0.1kg -20°C to 50°C Humidity • Free-exit input 0 – 90% (non-condensing) Degree of protection IP55 • Door Sense input Number of tags (including Masters) • Output for external alarm – alarm is generated under the following conditions: Number of Master tags 2 Voltage-free relay output √ Relay time configurable (off/1 - 254s/latching) √ Door Open Timer (0 - 254s/continuous) √ Door Open Pre-warn Timer (0 - 254s/continuous) √ Door Open Alarm (Off/1 - 254s/continuous) √ • Door Held Open for an extended period of time • Door Forced Open • Excellent read range Door Forced Alarm (Off/1 - 254s/continuous) • 13.56MHz operating frequency User interface 51 √ 5 LEDs Door Sense Input √ Free-exit input √ Onboard buzzer √ Output for optional external alarm √ SmartSwitch II compatible √ Anti-tamper switch facility √ Networkable - Anti Passback - Firmware upgrade facility √ TM 125mm 10mm 85mm www.CentSys.com.au 29mm 25mm Standalone Proximity Access Control System page 117 Product Code: Lattice Controller: LATC0003V1_AU, Lattice Slave Head: LATS0001V1_AU Technical Specifications Start as a standalone proximity unit and expand into a powerful networked system with up to 32 readers. A handy three-digit LED display allows for easy programming of user tags and Lattice’s user-friendly interface makes selective adding and deleting of tags veritable child’s play. For added functionality and even simpler administration, the system can be interfaced with the LatticeWARE computer software package. Lattice allows for the addition of up to 1000 user tags. Main Features Lattice L1000 Input voltage Current draw: Standby 110mA Operating 170mA Tag frequency • Weatherproof reader • Dual outputs on the controller and a single output on the Slave Heads – configurable as follows: • Optional anti-knock shield for reader • Pulsed output configurable from 1 - 254 seconds • Optional secure link (SmartSwitch II) • Latched output • Choose from either surface-mount or flush-mount fascias (included in kit) • Free-exit input Electronic Features • 1000 user tag memory – perfect for larger applications with many users • Tags are encrypted and cannot be cloned 80 - 100mm Surface-mount Width: 85mm x Depth: 29mm x Height:125mm Flush-mount Width: 85mm x Depth: 10mm (visible) x Height:125mm Weight 0.1kg -10 to +50°C Humidity • Output for external alarm – alarm is generated under the following conditions: • Door Held Open for an extended period of time • Door Forced Open 150mA Reader dimensions Temperature range • Door Sense input 110mA 13.56MHz Read range Mechanical Features LSH 9V - 12V AC or 12V - 15V DC ACCESS CONTROL SYSTEMs Lattice Networked Proximity Access Control System 0- 90% (non-condensing) Standalone capability √ - Dipswitch configurable network address - √ Relay time configuration (Off/1 -254s/Latch) √ √ Open collector output time configuration (Off/1 - 254s/latch) √ √ Door Open Timer (0 - 255s) √ √ Door Open Pre-warn Timer (0 - 254s/infinite) √ √ • 13.56MHz operating frequency • Anti-passback for improved security Door Open Alarm (Off/1 - 254s/infinite) √ √ Door Forced Alarm (Off/1 - 254s/infinite) √ √ • Start with a standalone controller and add up to 31 Slave Heads – great versatility • Limited Uses support – useful in pay-per-use and security applications Functional tags in off-line situation • Excellent read range • Backup Memory Module available Reduced power consumption √ √ 1000 40 Output channels 2 1 Voltage-free relay output (Potential-free) √ √ Open collector output (SmartSwitch II enabled) √ √1 Free-exit input (Potential free normally open contact - FRX) √ √ Door Sense input (Potential free normally closed contact - DOOR SEN) √ √ Output for optional external alarm (Potential free normally closed contact Optional extra) √ √ √ Anti-tamper Indication √ User interface - 3 digit display + 3 LEDs √ - User interface - 5 LEDs - √ √ - Hardware link to TUH (Lattice Take-up Head) Alarm output time(s) increments 0 - 254 sec; adjustable in 1 sec increments 1. Jumper on Slave Head selects between relay or open collector output. TM 125mm 10mm 85mm www.CentSys.com.au 29mm 25mm networked Proximity Access Control System page 119 SOLO and Lattice Accessories Product Code: Take-up head: LATTUH01V2_AU The LatticeWARE software is intuitive, easy to use and greatly enhances the functionality of the Lattice system. SmartSwitch II Product Code: SMARTSW2V1 SOLO and Lattice Anti-knock Shield Product Code: SOLOAKS0V1 The Lattice system, whether a standalone reader or networked system, can be further scaled by adding a PC. The PC or laptop becomes the Lattice server, which will now behave as the brains of the operation. The PC links to the controller via the Lattice Take-up Head (TUH). The TUH provides the system with a convenient tag reader for initial tag take-up and administration The LatticeWARE software makes the task of modifying and managing the system far simpler. Main features Electronic Features The SmartSwitch II serves as an interface board that provides for an additional security measure, effectively guarding your system against any unwarranted triggers. It relies upon the receipt of a coded signal from the controller, which will then respond to the trigger. • Interface with the Lattice system at any stage • Complete and easy setup • Full management of the system A Grade 304 stainless steel enclosure with a stylish and durable brushed finish for protecting your SOLO and Lattice reader from getting knocked and damaged. ACCESS CONTROL SYSTEMs LatticeWARE Networked Proximity Access Control System • Integrated time-barring support • Multiple operating reports with export capability • LatticeWARE is accessible from any PC in a networked system SOLO and Lattice Tamper Indication Switch Backup Memory Module – Lattice Controller A useful ancillary micro-switch that can be connected to the reader’s onboard buzzer or a third party alarm system and provides an output whenever the reader is removed from its enclosure. Effortlessly create a backup of all tags and settings saved to a Lattice controller’s memory for superior data security. Product Code: SOLOTAMP01 Product Code: PCA11667V1 TM www.CentSys.com.au networked Proximity Access Control System page 121 ACCESS CONTROL SYSTEMs SAFLEC Comprehensive Access Control System Various kit combinations available - refer to Price List An excellent access control system for small, medium and large networked installations. Besides the proximity access control readers, the system can cater for many different components such as biometric readers, Time and Attendance-compliant readers, and keypad access control. Example of a Typical System Configuration The network integrates with various protocols such as Wiegand; RS-485 and RS-232 allowing for network flexibility. Main Features • Networked, scalable access control system • Easy, user-friendly installation and administration • Anti-passback, timed Anti-passback and Zone Control • Flexible Time & Attendance exporting • Site-based configuration and hardware filtering • Graphical event and alert monitoring and control • PC-based actions for controlling third party devices such as CCTV, intrusion and fire systems www.CentSys.com.au Comprehensive Access Control System page 123 Various kit combinations available - refer to Price List Proximity Readers The Multiple Door Controllers can cater for, as a standard, five doors with a reader on both sides of each door for access control in both directions, and up to 3 200 tag-holders. The tag holder capacity is expandable up to 30 000, depending on the expansion boards utilised. Using remote I/O boards, the system can be expanded for a further three doors, totalling eight off the same controller. A total of 16 controllers can be networked together to handle up to 256 readers or 128 doors. However, multiple 16-controller networks can be linked together via a PC to create an ever-expanding access control meganetwork. Multiple door controller SDC-550 Maximum door capacity 1 Tag holder capacity 2 Multiple door controller SDC-520 Saflec Systems Proximity Readers Various kit combinations available - refer to Price List SAFLEC readers cover the majority of proximity access control needs, with the Wiegand Reader SSR-202 connecting to Wiegand-compatible controllers SDC-220 Two-door controller 8 8 2 3 200 30 000 1 000 Wiegand Reader SSR-202 Proximity Reader SSR-201 USB Take-on Reader SSR-221 High-bright, tri-colour LED √ √ √ Audible buzzer with different sounds for allowing and denying access √ √ - 16 3 16 3 4 (isolated) 3 Relay outputs - can be potential-free or powered 5 2 2 Industry standard 125khz operational frequency √ √ √ Digital inputs 4 8 4 4 Reads Hitag1, Hitag 2, EM4102 card technologies √ √ √ Robust RS-485 reader connection Wiegand interface connections - 2 2 Rotary-coded address switch for easy addressing √ √ - Events and actions on controller √ √ - 6 000 6 000 (+40 000 logs) 100 000 Configurable bitmasking for limiting card number length from 16 to 40 bits √ √ √ √ √ - Wiegand standard connection √ - - USB Connectivity - - √ Optional TCP/IP TCP/IP TCP/IP √ √ √ Integrated power supply 6 4.5A 2.6A 5A Battery backup 7Ah 7Ah 7Ah √ Controller offline transaction buffer capacity Robust isolated RS-485 bus between controllers with high stability and surge protection 5 Onboard communication port Weatherproof enclosure with lockable hinged access door Mains monitoring with a battery charging circuit and a low-voltage cut off √ √ Rotary coded address switch for easy addressing √ √ - Diagnostic LEDs for easy testing √ √ √ 1. Additional expansion modules required 4. 2 inputs may be configured to Automatic Fire and Tamper Control 2. Expandable to 30 000 via SEB-700 TCP/IP module 5. Maximum 16 controllers per device network (unlimited device networks) 3. Either isolated or networked topology 6. Maximum controller output 3A www.CentSys.com.au Comprehensive Access Control System ACCESS CONTROL SYSTEMs SAFLEC Door Controllers Comprehensive Proximity Access Control System page 125 Technical Specifications Product Code: SK/1BLK_AU (SMARTGUARD), SK/AIRBLK_AU (SMARTGUARDair) Technical Data The CentSys SMARTGUARD range provides efficient, secure keyless access control by enabling users to store up to 1000 unique codes comprising one to ten digits in its non-volatile memory. A variety of electrical devices can be activated (including gate operators, alarm panels, water pumps, etc.) by making use of one or more of the outputs provided. Input voltage SMARTGUARD: Multi-function, high-security, wired, keypad access control. SMARTGUARDair: High-security, wireless, keypad access control. Current 32mA (standby) – 180mA (max) NA -20oC – +60oC -18oC – +55oC Operating range NA Up to 30m Operating frequency NA 433MHz Outputs 3 (1 Relay output, 2 open collector outputs) Up to 15 individual channels Output pulse time range 1 – 255 sec (adjustable) or latched NA 1000 user codes 1000 user codes Memory Dimensions SMARTGUARDair • SMARTGUARD for hard-wired installations – compatible with almost any access control device • Wireless for quick and easy installations • Selectively add and delete user codes – convenient and secure management of the system • Backup Memory Module – guarantees data security • Limited Uses Counter – grant access to armed response, garden services, etc. - codes are automatically rendered invalid after pre-set number of uses IP55 • 1000 unique codes using one to ten digits – for greater security and versatility in a multi-user application • 15 channel output – activate up to 15 compatible devices • Selectively add and delete user codes – convenient and secure management of the system • Backup Memory Module – guarantees data security • Limited Uses Counter – grant access to armed response, garden services, etc. - codes are automatically rendered invalid after use • Operates on two AA Alkaline batteries (included), or a separate 12V power supply • Up to two years of battery life with up to 300 uses per day • Wireless operating range of up to 30 metres (line of sight) • Compatible with CentSys’ code-hopping receivers TM TM 132mm • Three channel output – activate up to three devices Polycarbonate Degree of protection SMARTGUARD • 1000 unique codes using one to ten digits – for greater security and versatility in a multi-user application Width:80mm x Depth: 38mm x Height: 132mm Housing material Main Features SMARTGUARDair 2 x AA Alkaline batteries (included) or external 12V DC 12V - 24V AC/DC Operating temperature Models Available SMARTGUARD ACCESS CONTROL SYSTEMs SMARTGUARD High-Security Keyless Access Control 80mm SMARTGUARD www.CentSys.com.au SMARTGUARDair 38mm networked Proximity Access Control System page 127 Access Control Kits Accessories SOLO Standalone System Kit Memory Module Product Code: CP108 (SMARTGUARD), PCA12201 (SMARTGUARDair), PCA11667V1 (Lattice Controller) Lattice Controller Kit Anti-tamper Switch Product Code: CP19 Product Code: SOLO0001V1 Product Code: LATC0003V1 • 1 x SOLO reader – Surface- or Flush-Mount • Order tags as needed • 1 x Lattice controller – Surface- or Flush-Mount • Order tags as needed 1 Lattice Slave Kit Create a backup of all users and settings stored in your keypad’s memory using this compact and useful memory module. Anti-knock Shield Product Code: SK/AKS An optional independent tamper switch can be fitted to provide a contact indicating if the unit has been forced open, or removed from its mountings. SmartSwitch II Product Code: SMARTSW2V1 Relay Switch Product Code: CP106 This optional controller interfaces with the open collector output of the SMARTGUARD hard-wired keypad to provide a potential-free contact (normally-open/normally-closed). It can be used to operate a door lock, gate operator, roller-shutter operator, traffic barrier, etc. An interface board that provides additional security. It will only respond to a coded signal from the SMARTGUARD keypad. This ensures that an unauthorised person can’t operate the device by simply opening the keypad and shorting wires to trigger the device. Lattice Take-up Head Kit Product Code: LATS0001V1 Product Code: LATTUH01V2 • 1 x Lattice Slave Head – Surface- or Flush-Mount 2 • 1 x Lattice Take-up Head, USB-type • 1 x Software package 3 SAFLEC SDC-220 Door Controller Kit SAFLEC SDC-520 Door Controller Kit Product Code: SFSDC22000 Product Code: SFSDC52000 • • • • An anti-knock shield constructed from brushed Grade 304 stainless steel. Also available in mild steel. 2 1 1 1 1 x x x x Controller 5 Lockable enclosure Power supply 5 Battery 5 • • • • 5 1 1 1 1 x x x x Controller 5 Lockable enclosure Power supply 5 Battery 5 5 SAFLEC SDC-550 Door Controller Kit SMARTGUARDair kit Product Code: SFSDC55000 Product Code: SK/AIR_R1B • • • • 1 1 1 1 x x x x Controller 5 Lockable enclosure Power supply 5 Battery 5 • 1 x SMARTGUARDair keypad 4 • 2 x AA Alkaline batteries B • 1 x Single-channel CentSys receiver 5 ACCESS CONTROL SYSTEMs SMARTGUARD and SMARTGUARDair C Nova Single- and Multichannel Receivers Various products available - refer to Price List SMARTGUARDair interfaces with high-security NOVA codehopping receivers. 1 SOLO Reader A Access Tag www.CentSys.com.au 2 Lattice Reader 3 Lattice Take-up Head B AA Alkaline Batteries 4 SMARTGUARDair Keypad 5 SAFLEC SDC-220 SAFLEC SDC-520 SAFLEC SDC-550 C Single-channel Receiver networked Proximity Access Control System page 129 Comprehensive Access Control System Various kit combinations available - refer to Price List Various kit combinations available - refer to Price List SAFLEC software is available in three different levels to suit the needs of any installation, no matter how large and sophisticated, or small and simple. The Corporate Edition is the most comprehensive package, followed closely by the Professional Edition. The Standard Edition, included free with the purchase of a SDC-550 Multiple Door Controller, is a good solution for smaller installations where the full functionality of the SAFLEC system is not required. Expansion boards offer a seemingly never-ending list of additional functionality to the SAFLEC system. From adding additional inputs and outputs and increasing memory to converting the interface protocol, virtually all potential user requirements are catered for. SEB 720 Remote I/O Expansion Board Product Code: SFSSEB72000 Main Features • Easy, user-friendly installation and administration • Quick search filters, low bandwidth setting and on-the-fly configuration • Anti-passback, Timed Anti-passback and Zone Control for greater security • Random search and tag-holder counters for scripting • Flexible Time & Accumulation exporting • 2 x Outputs (potential-free/powered) • 4 x Digital inputs • 4 x Digital/analogue inputs • Support for 1 x Wiegand device or 4 x RS-485 readers • Support for 2 x Wiegand devices or 4 x RS-485 readers • Connects to SDC-550 and SDC-520 on reader network • Connects to SDC-550 and SDC-520 on reader network • Lockable enclosure • Power supply • Graphical event and alert monitoring and control • Battery • PC-based actions for controlling third party devices such as CCTV, intrusion and fire systems • Tag-holder sequencing tasks (enforcing Time & Attendance clockings) SEB 721 Remote I/O Expansion Board with Onboard Receiver Product Code: SFSSEB72100 Flexible Time & Accumulation exporting Extremely flexible event-based action mode on controllers Corporate Edition SSS-110 Professional Edition SSS-130 Standard Edition SSS-100 Product Code: SFSSS11000 Product Code: SFSSS13000 Product Code: SFSSS10000 Across all Local only Local only • Each transmitter will have a unique number that will be linked as a card holder • Connects to SDC-550 and SDC-520 on reader network √ √ √ √ √ 16 powerful schedules per controller √ √ √ 32 public holidays integrated into schedules √ √ √ Unlimited Unlimited 8 doors √ √ √ Timed Anti-passback, Anti-passback and Zone Control • Connects to Expansion Head on SDC-550. √ √ Card capture/drop-box function available √ √ √ Biometric reader integration √ √ √ Supports Personal Assistant Software SSS-120 √ √ √ Supports Remote Client Software SSS-101 √ √ - 64 event controlled Counters or Timers per Controller √ - - Configurable extra data fields with automatic lists, dropdown lists, photographs or notes fields √ - - Tag-holder sequencing tasks (enforcing Time & Attendance clockings) √ - - Site-based configuration and hardware filtering √ - - Site-based configuration and hardware filtering √ - - Graphical event and alert monitoring and control √ - - PC-based actions for controlling third party devices √ - - Quick search filters, low bandwidth setting and on-thefly configuration √ - - Random search and tag holder counters for scripting √ - - Product Code: SFSEB70000 • Increase tag holder capacity to 30 000 √ Multiple companies and departments SEB 700 TCP/IP & Memory Expansion Board for SDC-550 • 4 x receiver channels; each receiver can control up to four buttons √ Mantrap (Booth) and turnstile operation supported Maximum number of doors supported Product Code: SFSSEB72200 • 2 x Outputs (potential-free/powered) • Software plug-in for PC-based overrides or custom extensions • Site-based configuration and hardware filtering SEB-722 Remote I/O Expansion Board ACCESS CONTROL SYSTEMs SAFLEC Expansion Boards SAFLEC Software Comprehensive Access Control System SSI-301-W Wiegand to RS-485 Converter Board Product Code: SFSSI300WO • Converts Wiegand data into the RS-485 used by the SDC-550 Multiple Door Controller, the SDC-520 Ethernet Controller and the SEB-720 remote I/O board • Small, space-saving board for unobtrusive installation behind a device, or within the controller cabinet • In-circuit programming for easy product updates • Rotary-coded address switch for easy addressing • Provides native TCP/IP connectivity SEB710 I/O Expansion Board Product Code: SFSEB71000 • Extends the I/O capabilities of the SDC-550 Multiple Door Controller • 8 x Relay outputs (configure as either powered or potential-free contacts) • 8 x Programmable digital inputs • 8 x Multi-purpose I/O points (set as either inputs or outputs) • Requires 12V DC power source 1. Personal Assistant Software SSS-120 is a visitor management, data capture solution which is ideal for picture capturing, card design and biometric reader take-on. Includes card printer capability - supports Windows drivers 2. Remote Client Software SSS-101 provides additional administrators full use of the master software from remote computer terminals www.CentSys.com.au Comprehensive Access Control System page 131
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
advertisement
© 2021