IFR 6000 specification sheet

IFR 6000 specification sheet
http://www.avionteq.com/AEROFLEX-IFR-6000-Transponder-DME-TCASADS-B-Test-Set.aspx
Avionics
www.avionteq.com
IFR 6000 Ramp Test Set
The IFR 6000 is a compact, lightweight and weatherproof unit designed for testing transponder
modes A/C/S, TCAS I and II as well as DME.
•
One main user screen for each test mode
•
Detachable antenna
•
Large display
•
Simple user interface
•
Lightweight and compact <8 lbs. (3.6 kg)
•
Battery 6 hours plus duration
•
Fully FAR part 43 appendix F compliant
•
European Elementary and Enhanced
Surveillance
The IFR 6000 features an extremely easy to use
interface where every parameter the user commonly needs to view is displayed on screen.
Controls
Dedicated Mode keys for XPDR, DME and TCAS
allow quick selection of the operational mode.
The application dependant softkeys and data
select/slew keys provide an intuitive man machine
interface.
DME mode is provided with dedicated keys for
frequency/channel selection and RF level control.
For frequently varied parameters in DME and
TCAS modes, such as Range and Rate, dedicated
keys are provided.
Operational Modes
Each operational mode has one main user screen. The operational
modes are:
XPDR (Sub-Modes: ADS-B MON, ADS-B GEN & GICB)
DME
TCAS 1, 2 (Sub-Modes: TIS)
Most tests can be completed without leaving the main user screens.
This simplifies the line technician's testing task.
For the very latest specifications visit
www.aeroflex.com
BAT
P AS S
XPDR - AUTO TEST
2.5 Hr
LEVEL=4
C O N F IG :G E N E R IC M O D E S
A N TE N N A : B O TTO M
REPL IE S =A,C,S
FREQ =1090.12 MHZ
TOP ERP =57.1 dBm
MTL
= -74.0 dBm
BOT ERP =56.0 dBm
MTL
= -73.1 dBm
A CODE
=1234
C AL T =35000
ft
S CODE
=1234
S AL T =3500 0
ft
T AIL
=N12345
DF17 DETEC TED=NO
F L T ID
=AA -50
AA=AC3 421(5303204 1)
F S =5 – NO AL ERT
SPI
IN AIR
VS=IN AIR
COUNTRY=United States
RUN
TEST
TEST
LIST
CONFIG
BAT
XP DR - CO NF IG
1
2
3
4
5
6
7
8
2.5 Hr
G E N E R IC A T C R B S
A TC R B S C LA S S A
A TC R B S C LA S S B
G E N E R IC M O D E S
M O D E S C LA SS A
M O D E S C LA SS B
M O D E S C L B O PT FR EQ
M O D E S C L B O PT PW R
SELECT
A NT
INFO
RETURN
Mode S and ATCRBS Transponder
User selects config required for test.
XPDR Auto-Test:
If the class of the transponder is unknown, the generic config may be
selected which applies to the widest limits.
Every parameter the user commonly needs to view is displayed on one
screen.
The auto-test performs all tests defined by FAR Part 43 Appendix F,
including the proposed Eurocontrol additional tests.
The tests are tailored automatically according to reported transponder level to avoid erroneous failures.
B AT
XPDR – T EST LIST
The test set will automatically determine the Mode S transponder
level.
The selected config parameters may be displayed by pressing the
INFO softkey.
Eight predetermined configs are provided to meet the currently fielded transponder test needs.
2.5 Hr
XPDR – ELEMENT SU R V1
1
2
3
4
5
6
7
8
9
10
11
12
A /C D E C D R /S L S
A /C F 1 /F 2 S P A C E /W ID T H
P O W E R /F R E Q
S A L L -C A L L
S R E P L Y T IM IN G
S R E PLY
U F0
U F4
U F5
U F 11
U F 16
U F 20
SELECT
TEST
- PA SS
- PA SS
- PA SS
- PA SS
- PASS
- PA SS
- PA SS
- PA SS
- PA SS
- PA SS
- PA SS
- PA SS
NEXT
PAGE
RETURN
The test list is selected from the auto-test screen. This provides an
easy means of selecting any of the individual tests that comprise the
auto-test.
13 UF21
14 UF24
15 ELEMENTARY SURVEILLANCE 1
16 ELEMENTARY SURVEILLANCE 2
F 1 W ID T H ·
F 2 W ID T H
F 1 -F 2
R E PLY
R E PLY
R E PLY
-8 1 d B m
F AI L
A = 0 .3 0 0 u s
A = 0 .4 0 0 u s
A = 2 0 .3 0 0 u s
B AT
2.5 Hr
A T C R B S A L L -C A L L
A =P A S S
C =P A S S
P U LS E
A = 0 .0 d B
C = 0 .0 d B
RUN
TEST
PREV
TEST
P AS S
RETURN
B AT
2.5 Hr
PREV
TEST
NEXT
TEST
RETURN
The Eurocontrol Elementary Surveillance DAP's (Downlink Aircraft
Parameters) are displayed on two screens.
XPDR – ENH ANC ED SUR V
B D S 4 ,0
B D S 5 ,0
V A R
NEXT
TEST
PREV
TEST
C = 0 .4 5 0 u s
C = 0 .6 0 0 u s
C = 2 0 .3 0 0 u s
C = 3 .5 5 u s
D ELA Y
A = 3 .0 5 u s
J IT T E R
A = 0 .2 5 0 u s
C = 0 .0 0 0 u s
R A T IO
A = 100 %
C = 10 0%
R E P L Y R A T IO
A =0%
C =0%
A M P
2.5 Hr
SU B N ETW O R K VER
=1
E N H P R O T IN D
= L V L 2 -4
SPEC SER V C A P
=Y E S
U E L M C A P A B IL IT Y
= 1 6 /1 s
D E L M C A P A B IL IT Y
= 1 6 /5 0 0 m s
A IR C R A F T ID C A P
= YES
S U R V ID E N T C A P
=Y E S
C O M M U S E G IC B R E P = 1
D TE
=Y E S
C O N T FLA G
=Y E S
S Q U IT T E R C A P
=Y E S
XPDR– EL EMENT SUR V2
RUN
TEST
17 ENHANCED SURVEILLANCE
SPAC/WDT H
RUN
TEST
B AT
B D S = 1 ,7
:0 ,5 :0 ,6 :0 ,7 :0 ,8 :0 ,9
:0 ,A :2 ,0 :2 ,1 :4 ,0 :4 ,1 :4 ,2 :4 ,3
:4 ,4 :4 ,5 :4 ,8 :5 ,0 :5 ,1 :5 ,2 :5 ,3
:5 ,4 :5 ,5 :5 ,6 :5 ,F :6 ,0
B D S 1 ,8 = 0 0 0 0 0 0 0 0 0 0 0 0 0 0
B D S 1 ,9 = 0 0 0 0 0 0 0 0 0 0 0 0 0 0
B D S 1 ,A = 0 0 0 0 0 0 0 0 0 0 0 0 0 0
B D S 1 ,B = 0 0 0 0 0 0 0 0 0 0 0 0 0 0
B D S 1 ,C = 0 0 0 0 0 0 0 0 0 0 0 0 0 0
B D S = 2 ,0
F L IG H T ID = U A 6 6 1
B D S = 3 ,0
A R A = 111010 10000000 R A C = 101 0
R A T=0
Tests on the 2nd screen (not shown) include:
0 XPDR – A/C
B D S = 1 ,0
P AS S
NEXT
TEST
B D S 6 ,0
RETURN
Individual tests may be reviewed for failures which are identified by
an arrow symbol.
RUN
TEST
P AS S
B AT
2.5 Hr
M C P /F C U S E L A L T
= 6 5 5 2 0 ft
B A R O PR ES SET
=
R O LL A N G LE
= 4 0 .1 d e g
T R U E T R A C K A N G L E = 9 0 .3 d e g
G R O U N D SPEED
= 5 1 2 k ts
TR A C K A N G LE R A TE =
4 .0 0 d e g /s
T R U E A IR S P E E D
= 5 1 2 k ts
M A G N E T IC H E A D IN G = 1 8 0 .3 d e g
IN D A IR S P E E D
= 5 1 2 k ts
M ACH NO
= 0 .3 0 0
IN E R T V E R T V E L
= -1 4 0 0 ft/m in
B A R O A LT R A TE
= -1 4 0 0 ft/m in
PREV
TEST
NEXT
TEST
RETURN
Eurocontrol Enhanced Surveillance DAP’s are displayed on one
screen.
BAT
T CAS
DF =
VS =
CC =
SL =
RI =
0
0
0
0
12
–
–
–
–
BAT
P AS S
XPDR - UFO
2.5 Hr
IN AIR
NOT SUPPORTED
NO TCAS SENS LEVEL REPORTED
AIRS P EE D 301 T O 600 KNO T S
AC = 03 A0(016 40) 1 0700 FT
MO DE C AL T CO MP ARE = P AS S
AA = AC3421(5 3032041)
DF 11 ADDRESS COMPARE = PASS
RUN
TEST
PREV
TEST
RUN
TEST
NEX T
TEST
2.5 Hr
SCENARIO: 0 - CUSTOM
T CAS T YP E:T CAS II
%RE PLY: 100
INTRUDER TYPE:MODE S
RANG E ST ART : 10.00 n m
STOP: 0.00 nm
RANG E RAT E : 350 kts
AL T ST ART : +10 00 ft
STOP:
0
ft
AL T RAT E :
600 fpm
CONVERGE
:OFF
UUT AL T
:
3 1200 ft
AL T DET ECT : O N
FREQ= 1030.000 MHz
ERP= 57.0 dBm
Ð
RANGE= 21.00 nm IN
ALT= +1000 ft
T CAS ST AT US= T RACKING
ST AT US = NO N - T HRE AT
ENCOUNTER= 0: 00
PREV
PARAM
NEX T
PARAM
MON
STORE/
RECALL
RETURN
TCAS
TCAS types…
No more HEX data field interpretation!
All Mode S Format tests display parameter in engineering units.
TCAS 1 MODE C
TCAS 2 ATCRBS
BAT
P AS S
XPDR – UF11
TCAS 2 MODE S
2.5 Hr
The Auto-Altitude feature interrogates Mode S XPDR of A/C under
test to obtain current altitude.
DF=11
CA=0 - L E VEL
2
CA
MODE
PI = 02F08D
AA=AC3 421(5303 2041)
II LOCKOUT TIMER=18S
II
MAT CH=P AS S
S I L O CKO UT T IMER=18 S
S I MAT CH=P AS S
RUN
TEST
PREV
TEST
Select pre-stored named scenarios directly from the auto-test screen.
NE X T
TEST
ADS-B and GICB
ADS-B MON: Used to monitor DF17 extended squitter from
transponders and DF18 extended squitter from 1090 MHz ADS-B
emitters.
RETURN
Comprehensive II / SI code and lockout timer test
XPDR – S
IT M R E P L Y
D ELA Y
J IT T E R
ADDRESS
R A T IO
-8 1 d B m
B AT
P AS S
AL L - C AL L
A = 1 2 8 .0 8 u s
A = 0 .5 1 0 u s
A = 2 A C 421
A = 100 %
A =0%
ADS-B GEN: Used to generate DF17/DF18 extended squitter, simulating transponders and 1090 MHz ADS-B emitters.
GICB: Used to monitor DAP's (all fields).
2.5 Hr
C = 1 2 8 .0 7 u s
C = 0 .5 1 0 u s
C = 2 A C 421
C = 100 %
C =0%
1
2
3
4
5
6
7
M O D E S A L L -C A L L = P A S S
ADDRESS
= 2A C 421
T A IL = N 1 2 3 4 5
C O U N T R Y = U n ite d S ta te s
RUN
TEST
PREV
TEST
NEXT
TEST
0,5
0,6
0,8
0,9
6,1
6,2
6,3
AIRBORNE POS
SURFACE POS
IDENT & CAT
AIRBORNE VEL
A/C ST AT US
T ARG ST AT E
A/C O P ST AT US
B AT
V O R : 1 0 8 .0 0 M H z
F R E Q : 978 M H z
C H A N : 17X
RUN
TEST
PREV
PARAM
NEXT
PARAM
RETURN
The BDS status is annunciated to indicate if the squitter has been
captured, not available or not seen.
ER P=5 5.0 d Bm
PRF =150 Hz
STOP
RATE
BDS
DATA
ADS-B MON:
The ADS-B MON LIST shows BDS formats supported.
IN
ECHO :OFF
IDENT : OFF
T X FREQ = 1041.0 0 MHZ
P1 WIDT H= 3.50 0 us
P2 WIDT H= 3.50 0 us
P1 - P2
= 3 6.00 us( Y)
UUT LVL
= -38.2 dBm
2.5 Hr
AVAIL
NOT CAP
AVAIL
AVAIL
AVAIL
AVAIL
NO SQTR
2.5 Hr
R F L V L : -2 .0 d B m
R A T E : 6 5 0 k ts
R A N G E:450.00 nm
% R EPLY: 100
SQT R
: ON
-
RETURN
RUN
TEST
DME
BAT
ADS -B MON DF17
The BDS DATA key displays the BDS DATA screen for the selected
BDS number.
IN/OUT
DME
All the user needs are on one screen.
•
RF level control for track sensitivity tests
•
Supports all DME/TACAN channels selectable in VOR paired
channels
•
Full UUT measured parameters are displayed.
For the very latest specifications visit
www.aeroflex.com
ADS -B MON BDS 0,5
BAT
AVAIL
2.5 Hr
BDS=0,5 AIRBORNE POS
TYPE=14
DF1 7 AA=3 AC42 1 (1654 2041)
COUNT=1000
ME=00000000000000
PERIOD=DEFAULT
L AT = 37 39 00 N
LONG= 97 25 48 W
PO S=G L O BAL
S AF =1
T=N/UTC
SURV E IL L ANCE ST AT US
= NO INF O
BARO P RES ALT=131025 ft
GNSS ALT = N/A
RUN
TEST
PREV
TEST
NEX T
TEST
The BDS DATA key displays the BDS DATA screen for the selected
BDS number.
GICB BDS 3,0
RUN
TEST
The BDS DATA screen displays full content of selected BDS format
being received via DF17 or DF18 extended squitters.
1
2
3
4
5
6
7
0,5
0,6
0,8
0,9
6,1
6,2
6,3
BAT
AIRBORNE POS
SURFACE POS
IDENT & CAT
AIRBORNE VEL
A/C ST AT US
T ARG ST AT E
A/C O P ST AT US
2.5 Hr
-
DISABLED
- ENABLED
- ENABLED
- E NABL E D
- ENABLED
- ENABLED
- ENABLED
PREV
TEST
BDS
ON
BAT
1
BRG(deg) :
120
RNG(nm) : 6.00
AL T (ft)
: 3500
AL T RAT E:CL IMB
HDG(deg) :
234
T RAF F IC : PRO X
RETURN
BAT
2.5 Hr
BDS=0,5 AIRBORNE POS
TYPE: 9
DF1 7 AA:3 AC421 (1 6542041)
COUNT=1000
ME=490844AE8319EA
P ERIO D: 1.00 s
L AT : 37 39 0 0 N
LONG: 97 25 48 W
POS:
S AF:1
T:N /UTC
SURV E IL L ANCE ST AT US : NO INF O
BARO P RES ALT:126700 ft
GNSS ALT : N/A
RUN
TEST
2.5 Hr
UUT HDG:180 deg
2
3
4
5
90
234
182
23
4.00
3.00
2.00
1.00
2000
1000
500
0
LEVEL LEVEL CLIMB LEVEL
178
56
22
0
PROX PROX
PROX TRFC
ADDR=3 AC421
(16542 041) N1 2345
TSCR=
5
TSDR= 1
AL T =126700
T IS ST AT US =CO NNECT ING
INFO=0000
The BDS ENABLE/DISABLE key enables or disables the selected
BDS number for squittering via DF17 or DF18 extended squitters.
The BDS DATA key displays the BDS DATA screen for the selected
BDS number.
ADS -B GEN BDS 0,5
RETURN
BDS DATA screens display full content of the selected BDS format
being received via GICB DF20 or DF21 in RTCA/ICAO engineering
units.
T IS
BDS
DATA
PREV
TEST
GICB:
T ARG ET S:5
RUN
TEST
2.5 Hr
RETURN
ADS-B MON:
ADS-B GE N DF17
BAT
AVAIL
BDS=3,0 ACAS ARA
DF2 0 AA=3 AC42 1 (1654 2041)
MB=00000000000000
T IDB= 70 d eg
T IDA= 32000 ft
TIDR= 1.00 nm
ARA=11101010000000
TID=3A4518
RAC=1010
RAT =1
MTE=3
T HR E AT ADDRE S S=N/A
T T I=2 - AL T /RANG E/BE ARING DAT A
PREV
PARAM
ft
NEX T
PARAM
TIS
Up to 5 static intruders may be simulated relative to the A/C (UUT).
General
Radiated Testing:
The IFR 6000 is supplied with a lightweight fully sealed directional
antenna that may be test set mounted, hand held or tripod mounted.
RUN
TEST
BDS
OFF
PREV
PARAM
NEX T
PARAM
RETURN
ADS-B GEN:
BDS DATA screens display full content of the selected BDS format in
RTCA/ICAO engineering units.
The NEXT & PREV PARAM keys select data fields for editing via the
data slew keys.
B AT
GICB DF20
1
2
3
4
5
6
7
8
9
10
11
12
0,5
0,6
0,7
0,8
0,9
1,0
1,7
1,8
1,9
1,A
1,B
1,C
RUN
TEST
AIRB ORN E POS
SURF AC E POS
S Q T R ST AT US
ID E NT & C AT
AIRB ORN E VEL
D AT A L NK C AP
COM GICB CAP
SPEC SER V C AP
SPEC SER V C AP
SPEC SER V C AP
SPEC SER V C AP
SPEC SER V C AP
#1
#2
#3
#4
#5
-
2.5 Hr
AV AI L
NOT CAP
AV AI L
AV AI L
AV AI L
AV AI L
AV AI L
AV AI L
AV AI L
AV AI L
AV AI L
AV AI L
BDS
DATA
GICB:
The BDS LIST shows BDS formats supported.
RETURN
Direct Connect Testing:
The IFR 6000 may be directly connected to the UUT via a supplied
RF coax cable via the RF I/O port.
Transit Case:
REPLY PULSE SPACING
The IFR-6000 is supplied in a rugged plastic transit case which provides stowage for the test set, directional antenna, RF coax cable,
antenna shield, breakout box, and power supply/charger.
P1 to P2
12 µs (±100 ns) (X Channel) @ 50% peak
P1 to P2
30 µs (±100 ns) (Y Channel) @ 50% peak
REPLY PULSE WIDTH
P1/P2
3.5 µs (±0.5 µs)
ECHO REPLY
Control
On/Off
Position
30 nmi (±1 nmi)
Amplitude
-11 dB (±1 dB) relative to reply level
REPLY PULSE RISE AND FALL TIMES
ALL PULSES
Rise Time
2.5 µs (±0.25 µs) (10% to 90%)
SPECIFICATION
Fall Time
DME MODE SPECIFICATIONS
2.5 µs (±0.25 µs) (90% to 10%)
SIGNAL GENERATOR
REPLY DELAY
A 5-minute warm-up period is required for all specifications.
X CHANNEL
Fixed Reply Delay
50 µs (±100 ns)
Y CHANNEL
Fixed Reply Delay
56 µs (±100 ns)
OUTPUT FREQUENCY
REPLY FREQUENCY
Range
962 to 1213 MHz
RANGE DELAY
Accuracy
±10 kHz
OUTPUT LEVEL
ANTENNA PORT
Range
-67 to -2 dBm at Antenna port
Resolution
1 dB
X AND Y CHANNEL
Range
0 to 450.00 nmi
Resolution
0.01 nmi
Accuracy
±0.01 nmi
RANGE RATE
Accuracy
X AND Y CHANNEL
±2 dB
Range
Distance to UUT antenna
6 to 300 ft with supplied antenna
RF I/O PORT
10 to 6500 kts
Resolution
1 kts
Range
Accuracy
-115 to -47 dBm
±0.01% typical, tested to ±0.5%
Resolution
SQUITTER
1 dB
Accuracy
PRF
-95 dBm to –47 dBm
±1 dB
Accuracy
2700 Hz
Accuracy
-115 dBm to <-95 dBm
±2 dB
±2%
Distribution
Per ARINC 568
For the very latest specifications visit
www.aeroflex.com
REPLY EFFICIENCY
INTERROGATION PRF
Range
Range
0 to 100%
Resolution
1% increments
Accuracy
±0.5%
1 to 300 Hz
Resolution
1 Hz
Accuracy
±2 Hz
IDENT TONE
TRANSPONDER MODE SPECIFICATIONS
Selection
SIGNAL GENERATOR
Selectable three letter code
Frequency
1350 Hz
Accuracy
±2 Hz
UUT MEASUREMENTS
RF OUTPUT FREQUENCY
Interrogation Frequency
1030 MHz
Accuracy
±10 kHz
RF OUTPUT LEVEL
ERP
Range
+47 to +64 dBm
Resolution
0.1 dB
Accuracy
±2 dB
DIRECT CONNECTION PEAK PULSE POWER
Range
+47 to +64 dBm
Resolution
0.1 dB
Accuracy
±1 dB
FREQUENCY
Range
1025.00 to 1150.00 MHz
Resolution
10 kHz
Accuracy
±20 kHz
INTERROGATION PULSE WIDTH
P1 AND P2 PULSE WIDTHS
Range
2.00 to 5.00 µs
Resolution
1 ns
Accuracy
±50 ns
INTERROGATION PULSE SPACING
P1 to P2 Spacing
10 to 14 µs (X Channel)
P1 to P2 Spacing
34 to 38 µs (Y Channel)
Resolution
10 ns
Accuracy
±20 ns
ANTENNA CONNECTOR
MTL + 6 dB typical, automatically controlled for a MTL range of -83 to
-68 dBm
Range
-67 to -2 dBm at antenna connector
Resolution
0.5 dB
Accuracy
±2 dB
Distance to UUT antenna
6 to 200 ft with supplied antenna
RF I/O CONNECTOR
MTL + 6 dB typical, automatically controlled
Range
-115 to -47 dBm
Resolution
0.5 dB
Accuracy
-95 to –47 dBm, ±1 dB
Accuracy
-115 to <-95 dBm, ±2 dB
ATCRBS/MODE S INTERROGATION PULSE SPACING
MODE A
P1 to P2
2.00 µs (±25 ns)
P1 to P3
8.00 µs (±25 ns)
MODE C
P1 to P2
2.00 µs (±25 ns)
P1 to P3
21.00 µs (±25 ns)
MODE S
P1 to P2
2.00 µs (±25 ns)
P1 to P6
3.50 µs (±25 ns)
P1 to SPR
4.75 µs (±25 ns)
P5 to SPR
0.40 µs (±50 ns)
INTERMODE INTERROGATION PULSE SPACING
INTERROGATION TEST SIGNALS
MODE A
MODE S
P1 to P3
PRF
8.00 µs (±25 ns)
50 Hz (±5 Hz)
ATCRBS
P1 to P4
10.00 µs (±25 ns)
PRF
MODE C
235 Hz (±5 Hz)
P1 to P3
UUT MEASUREMENTS
21.00 µs (±25 ns)
P1 to P4
ERP (@ 1090 MHZ)
23.00 µs (±25 ns)
Range
+45.5 to +59 dBm (35.5 to 800 watts)
INTERROGATION PULSE WIDTHS
Resolution
MODE A,C,S,INTERMODE
0.1 dB
P1,P2,P3
Accuracy
0.80 µs (±50 ns)
±2 dB
MODE S
Direct Connection Peak Pulse Power (@ 1090 MHz)
P6 (Short DPSK Block)
Range
16.25 µs (±50 ns)
+46.5 to +59 dBm (45 to 800 watts)
P6 (Long DPSK Block)
Resolution
30.25 µs (±50 ns)
0.1 dB
P5
Accuracy
0.80 µs (±50 ns)
±1 dB
INTERMODE
P4 (Short)
TRANSMITTER FREQUENCY
0.80 µs (±50 ns)
Range
P4 (Long)
1087.000 to 1093.000 MHz
1.60 µs (±50 ns)
Resolution
10 kHz
INTERROGATION PULSE RISE AND FALL TIMES
Accuracy
ALL MODES
±50 kHz
Rise Time
50 to 100 ns
RECEIVER SENSITIVITY, RADIATED MTL
Fall Time
Range
50 to 200 ns
-79 to -67 dBm into 0 dBi antenna
Resolution
PHASE MODULATION
0.1 dB
ALL MODES
Accuracy
Transition Time
±2 dB, typical
≤80 ns
Phase Shift
RECEIVER SENSITIVITY, DIRECT CONNECTION MTL
180° (±10°)
Range
-79 to -67 dBm
SLS LEVELS
Resolution
ATCRBS
0.1 dB
SLS Level (P2)
Accuracy
-9 dB, -1 to +0 dB relative to P1 level
±2 dB
0 dB, -0 to +1 dB relative to P1 level
OFF
REPLY DELAY
MODE S
ATCRBS
SLS Level (P5)
Range
-12 dB, -1 to +0 dB relative to P6 level
1.80 to 7.00 µs
+3 dB, -0 to +1 dB relative to P6 level
Resolution
OFF
10 ns
Note: SLS level is automatically controlled in the SLS LEVEL test.
Accuracy
±50 ns
For the very latest specifications visit
www.aeroflex.com
REPLY DELAY, MODE S AND ATCRBS MODE S ALL-CALL
PULSE AMPLITUDE VARIATION
Range
Range, Mode S (Relative to P1)
-3 to +3 dB
Range, ATCRBS (Relative to F1)
-3 to +3 dB
Resolution
0.1 dB (0.01 dB via RCI)
Accuracy
±0.5 dB
125.00 to 131.00 µs
Resolution
10 ns
Accuracy
±50 ns
REPLY DELAY JITTER
ATCRBS
Range
0.00 to 2.30 µs
Resolution
1 ns
Accuracy
±20 ns
MODE S AND ATCRBS MODE S ALL-CALL
Range
0.00 to 6.00 µs
Resolution
1 ns
Accuracy
±20 ns
PULSE SPACING
F1 TO F2
Range
19.70 to 21.60 µs
Resolution
1 ns
Accuracy
±20 ns
MODE S PREAMBLE
Range, P1 to P2
0.8 to 1.2 µs
Range, P1 to P3
3.3 to 3.7 µs
Range, P1 to P4
4.3 to 4.7 µs
Resolution
1 ns
Accuracy
±20 ns
PULSE WIDTHS
F1 AND F2
Range
0.25 to 0.75 µs
Resolution
1 ns
Accuracy
±20 ns
MODE S PREAMBLE
Range
0.25 to 0.75 µs
Resolution
1 ns
Accuracy
±20 ns
DF 11 SQUITTER PERIOD
Range
0.10 to 4.88 sec
Resolution
10 ms
Accuracy
±10 ms
DIVERSITY ISOLATION
Range
0 to >20 dB (Depending on Test Distance)
Test Distance
1.83 m (6ft) to 28.96 m (95 ft)
Resolution
0.1 dB
Accuracy
±3 dB
TCAS MODE SPECIFICATIONS
SIGNAL GENERATOR
OUTPUT FREQUENCY
REPLY FREQUENCY
1090 MHz
Accuracy
±10 kHz
OUTPUT LEVEL (SIMULATED ERP)
ANTENNA CONNECTOR Note 1
Radiated power at 0dBi UUT antenna
-68 dBm typical @ 10 Nmi Range, automatically controlled
Range
-67 to -2 dBm at Antenna connector
Resolution
0.5 dB
Accuracy
±2 dB
Distance to UUT antenna
6 to 300 ft with supplied antenna
RF I/O CONNECTOR
Automatic mode
-68 dBm @ 10 Nmi Range, automatically controlled
Manual mode Range
-115 to -47 dBm
Resolution
0.5 dB
Accuracy
-95 to –47 dBm, ±1 dB
Accuracy
-115 to <-95 dBm, ±2 dB
REPLY PULSE SPACING
REPLY PULSE AMPLITUDES
MODE C
ATCRBS
±1 dB relative to F1
F1 to F2
20.30 µs (±25 ns)
Mode S
±1 dB relative to P1
F1 to C1
1.45 µs (±25 ns)
F1 to A1
2.90 µs (±25 ns)
F1 to C2
4.35 µs (±25 ns)
F1 to A2
5.80 µs (±25 ns)
REPLY PULSE RISE AND FALL TIMES
ALL MODES
Rise Time
50 to 100 ns
Fall Time
50 to 200 ns
PERCENT REPLY
F1 to C4
7.25 µs (±25 ns)
F1 to A4
Range
0 to 100%
8.70 µs (±25 ns)
F1 to B1
Resolution
10%
11.60 µs (±25 ns)
F1 to D1
Accuracy
±1%
13.05 µs (±25 ns)
F1 to B2
14.50 µs (±25 ns)
F1 to D2
15.95 µs (±25 ns)
F1 to B4
17.40 µs (±25 ns)
F1 to D4
REPLY DELAY
ATCRBS
3.0 µs (±50 ns)
Mode S
128 µs (±50 ns)
RANGE DELAY
Range
18.85 µs (±25 ns)
MODE S
0 to 260 nmi
Resolution
P1 to P2
0.1 nmi
1.00 µs (±25 ns)
P1 to P3
Accuracy
±0.02 nmi
3.50 µs (±25 ns)
P1 to P4
4.50 µs (±25 ns)
P1 to D1
8.00 µs (±25 ns)
D1 to Dn (n=2 to 112)
1.00 µs times (n-1) (±25 ns)
REPLY PULSE WIDTHS
RANGE RATE
Range
-1200 to +1200 kts
Resolution
10 kts
Accuracy
10%
ALTITUDE RANGE
MODE C
Range
All Pulses
0.45 µs (±50 ns)
MODE S
P1 through P4
0.50 µs (±50 ns)
D1 through D112
0.50 µs (±50 ns), 1 µs chip width
Reply Modes
TCAS I / II Mode C (with altitude reporting)
TCAS II Mode S formats 0, 11, 16
-1000 to 126,000 ft
Resolution, Mode C
100 ft
Resolution, Mode S
25 ft
ALTITUDE RATE
Range
-10,000 to +10,000 fpm
Resolution
100 fpm
Accuracy
10%
For the very latest specifications visit
www.aeroflex.com
MODE S
SQUITTER
Range
Control
+43 to +58 dBm (20 to 631 watts)
On/Off
Resolution
Rate
0.8 to 1.2 seconds, randomly distributed
RECEIVER
±1 dB
PULSE SPACING
FREQUENCY
ATCRBS (Mode C All Call)
S1 to P1
≤±200 ns
Rejects
≥±1.0 µs
Accepts
Accepts
1029.900 to 1030.100 MHz
Resolution
1 kHz
21.0 µs
Accuracy
≤±200 ns
Rejects (<10% Replies)
P1 to P4
Range
2.0 µs
Accepts
P1 to P3
≥±1.0 µs
23.0 µs
≥±1.0 µs
Mode S
Accepts
2.0 µs
Accepts
≥±1.0 µs
≥±1.5 µs
SUPPRESSION
<10% Replies
ERP (@ 1030 MHZ)
ATCRBS
Range
+43 to +58 dBm (20 to 631 watts)
Resolution
0.1 dB
Accuracy
±2 dB
MODE S
Range
+43 to +58 dBm (20 to 631 watts)
Resolution
0.1 dB
Accuracy
±2 dB
DIRECT CONNECTION PEAK PULSE POWER (@ 1030 MHZ)
ATCRBS
Range
+43 to +58 dBm (20 to 631 watts)
0.1 dB
±1 dB
RF I/O
Type
Impedance
UUT MEASUREMENTS
Accuracy
±0.2 sec
Input/Output
ATCRBS (P2 or S1)
Resolution
Accuracy
MISCELLANEOUS INPUT/OUTPUTS
≤±200 ns
>0.5dB above level of P1
1.0 to 12.0 sec
0.1 sec
4.75 µs
Rejects (<10% Replies)
Range
Resolution
≤±200 ns
Rejects (<10% Replies)
P1 to SPR
±10 kHz
TCAS BROADCAST INTERVAL
≤±200 ns
Rejects (<10% Replies)
P1 to P2
0.1 dB
Accuracy
50 Ω typical
Maximum Input Level
4 kW peak
10 W average
VSWR
<1.3:1
ANTENNA
Type
Input/Output
Impedance
50 Ω typical
Maximum Input Level
10 W peak
0.5 W average
VIDEO
Type
Output
Impedance
50 Ω typical
Generate Video Level
1.1 Vpp (±0.4 V) into 50 Ω
Receive Video Level
Proportional to IF level
Baseline
±0.5 V referenced to ground
TEST ANTENNA
VSWR
<1.5:1
Gain
6 dB, Typical
TIME BASE (TCXO)
Temperature Stability
±1 ppm
Aging
±1 ppm per year
Accuracy
±1 ppm
Test Limit
±0.3 ppm
BATTERY
Type
Li Ion
Duration
>4 hrs continuous operation
>6 hrs, Typical
INPUT POWER (TEST SET)
Input Range
11 to 32 Vdc
Power Consumption
55 W Maximum
16 W Nominal at 18 Vdc with charged battery
Fuse Requirements
5 A, 32 Vdc, Type F
INPUT POWER (SUPPLIED EXTERNAL AC TO DC
CONVERTER)
Input Range
100 to 250 VAC, 1.5 A Max, 47 to 63 Hz
Mains Supply Voltage Fluctuations
≤10% of the nominal voltage
Transient Overvoltages
According to Installation Category II
ENVIRONMENTAL (TEST SET)
Use
Pollution Degree 2
Altitude
≤4800 meters
Operating Temperature
NOTE 2
-20°C to 55°C
Storage Temperature
NOTE 3
-30°C to 71°C
Relative Humidity
95% (±5%) from 5° to 30°C
75% (±5%) from 30° to 40°C
45% (±5%) from 40° to 55°C
PHYSICAL CHARACTERISTICS
DIMENSIONS
Height
11.2 inches (28.5 cm)
Width
9.1 inches (23.1 cm)
Depth
2.7 inches (6.9 cm)
Weight (Test set only)
<8 lbs. (3.6 kg)
SUPPLEMENTAL INFORMATION
Test Set Certifications
Altitude, operating
Altitude, not operating
Bench Handling
Blowing Dust
MIL-PRF-28800F
MIL-PRF-28800F
MIL-PRF-28800F
MIL-STD-810F
Drip-proof
Explosive Atmosphere
MIL-PRF-28800F
MIL-STD-810F
Relative Humidity
Shock, Functional
Vibration Limits
Temp, operating NOTE 4
Temp, not operating NOTE 5
Transit Drop
Safety Compliance
Class 2
Class 2
Class 2
Method 510.4,
Procedure I
Class 2
Method 511.4,
Procedure 1
Class 2
Class 2
Class 2
Class 2
Class 2
Class 2
MIL-PRF-28800F
MIL-PRF-28800F
MIL-PRF-28800F
MIL-PRF-28800F
MIL-PRF-28800F
MIL-PRF-28800F
UL-61010B-1
EN 61010-1
CSA 22.2 No 61010-1
EMC
EN 61326
External AC-DC Converter Certifications
Safety Compliance
UL 1950 DS
CSA 22.2 No. 234
VDE EN 60 950
EMI/RFI Compliance
FCC Docket 20780 Curve “B”
EMC
EN 61326
Transit Case Certifications
Drop Test
FED-STD-101C
Method 5007.1
Paragraph 6.3,
Procedure A,
Level A
Falling Dart Impact
Vibration, Loose Cargo
Vibration, Sweep
Simulated Rainfall
Immersion
ATA 300
FED-STD-101C
ATA 300
MIL-STD-810F
Category I
Method 5019
Category I
Method 506.4
Procedure II of 4.1.2
FED-STD-101C
Method 5009.1
Sec 6.7.1
MIL-STD-810F
Method 512.4
ENVIRONMENTAL (SUPPLIED EXTERNAL AC TO DC
CONVERTER)
Use
Indoors
Altitude
≤10,000 meters
Operating Temperature
0° to 40°C
Storage Temperature
-20°C to 71°C
For the very latest specifications visit
www.aeroflex.com
VERSIONS AND ACCESSORIES
When ordering please quote the full ordering number information.
Ordering
Numbers
6000-110
Versions
IFR 6000 Mode A/C/S Transponder and DME
Ramp Test Set, with US Mains Leads
6000-220
IFR 6000 Mode A/C/S Transponder and DME
Ramp Test Set, with European Mains Leads
6000OPT2
TCAS (TIS)
6000OPT3
ADS-B
Extended Standard Warranties with Calibration for 6000
W6000/203C
Extended standard warranty 36 months with
scheduled calibration
W6000/205C
Extended standard warranty 60 months with
scheduled calibration
Accessories for 6000
AC0820
Desk Top Stand
AC0826
Tripod
AC24006
Tripod, Dolly, Stand
AC0824CD
IFR 6000 Maintenance Manual - CD
AC0825CD
IFR 6000 Operation Manual - CD
AC0829
25ft TNC/TNC COAX
AC0830
50ft TNC/TNC COAX
Notes
NOTE 1 Simulates a 50.5 dBm XPDR ERP at 10 nMi range.
NOTE 2 Battery charging temperature range: 5°C to 40°C (controlled by internal
charger).
NOTE 3 Li Ion Battery must be removed below -20°C and above 60°C.
NOTE 4 Temperature range extended to -20°C to 55°C.
NOTE 5 Temperature range reduced to -30°C to 71°C.
CHINA Beijing
Tel: [+86] (10) 6539 1166
Fax: [+86] (10) 6539 1778
GERMANY
Tel: [+49] 8131 2926-0
Fax: [+49] 8131 2926-130
SCANDINAVIA
Tel: [+45] 9614 0045
Fax: [+45] 9614 0047
CHINA Shanghai
Tel: [+86] (21) 5109 5128
Fax: [+86] (21) 5150 6112
HONG KONG
Tel: [+852] 2832 7988
Fax: [+852] 2834 5364
SPAIN
Tel: [+34] (91) 640 11 34
Fax: [+34] (91) 640 06 40
FINLAND
Tel: [+358] (9) 2709 5541
Fax: [+358] (9) 804 2441
INDIA
Tel: [+91] 80 5115 4501
Fax: [+91] 80 5115 4502
UK Burnham
Tel: [+44] (0) 1628 604455
Fax: [+44] (0) 1628 662017
FRANCE
Tel: [+33] 1 60 79 96 00
Fax: [+33] 1 60 77 69 22
KOREA
Tel: [+82] (2) 3424 2719
Fax: [+82] (2) 3424 8620
UK Cambridge
Tel: [+44] (0) 1763 262277
Fax: [+44] (0) 1763 285353
As we are always seeking to improve our products,
the information in this document gives only a general
indication of the product capacity, performance and
suitability, none of which shall form part of any contract. We reserve the right to make design changes
without notice. All trademarks are acknowledged.
Parent company Aeroflex, Inc. ©Aeroflex 2006.
UK Stevenage
Tel: [+44] (0) 1438 742200
Fax: [+44] (0) 1438 727601
Freephone: 0800 282388
USA
Tel: [+1] (316) 522 4981
Fax: [+1] (316) 522 1360
Toll Free: 800 835 2352
w w w.aeroflex.com
[email protected]
Our passion for performance is defined by three
attributes represented by these three icons:
solution-minded, performance-driven and customer-focused.
Part No. 46891/184, Issue 9, 11/07
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement