M9381A PXIe Vector Signal Generator

M9381A PXIe Vector Signal Generator
Keysight Technologies
M9381A PXIe Vector Signal Generator
1 MHz to 3 GHz or 6 GHz
Data Sheet
Table of Contents
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Technical Specifications and Characteristics . . . . . . . . . . . . . . . . . 4
Block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Definitions for specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Recommended best practices in use . . . . . . . . . . . . . . . . . . . . . . . 5
Additional information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Frequency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Amplitude . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Spectral purity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Analog modulation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Vector modulation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Format specific modulation data . . . . . . . . . . . . . . . . . . . . . . . . . 18
Environmental and physical specifications . . . . . . . . . . . . . . . . . . 22
System requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Setup and Calibration Services . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Support and Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Configuration and Ordering Information . . . . . . . . . . . . . . . . . . . 27
3 | Keysight | M9381A PXIe Vector Signal Generator – Data Sheet
Overview
Be Ready for Tomorrow — Today
RF requirements keep growing while timelines keep shrinking.
To help ease the technical and business pressures, the right test
solution provides continuity in measurements and longevity in
capability. The Keysight Technologies, Inc. M9381A PXIe vector
signal generator (PXI VSG) is the next logical step in RF signal
generation.
To get proven results even faster, use Keysight software with the
PXI VSG to create the test stimulus you need to validate and test
your RF communications designs. Signal Studio and Waveform
Creator software simplify and streamline signal creation and
generation from basic analog and digital modulation to the latest
wireless standards like LTE-Advanced and 802.11ac WLAN.
Combine the M9381A PXI VSG with the M9391A PXIe vector
signal analyzer for a complete solution for fast, high quality
measurements optimized for RF manufacturing test environments.
From fully modular hardware to software leverage to worldwide
support, the PXI VSG is the low-risk way to manage change and
be ready for tomorrow — today.
Figure 1. M9381A PXIe vector signal generator with four modules
consisting of the M9311A digital vector modulator, M9310A source
output, M9301A synthesizer, and M9300A frequency reference.
Product description
The M9381A PXIe vector signal generator (PXI VSG) is a compact
modular instrument that provides frequency coverage from 1 MHz
to 6 GHz and up to 160 MHz RF modulation bandwidth. The
M9381A is comprised of four individual PXIe modules — M9311A
modulator, M9310A source output, M9301A synthesizer, and
M9300A frequency reference. A single M9300A frequency
reference can be shared between multiple instruments to minimize
footprint. A wide range of instrument drivers are available to
support your development environment of choice.
The flexible, modular design of the M9381A enables you to
efficiently scale to multi-channel signal generation to test
multiple-input, multiple-output (MIMO) devices. Many capability
options such as memory, frequency range and modulation
bandwidth can also be easily upgraded in the field.
Applications
–– Power amplifier and front-end-module design validation
and manufacturing
–– Radio transceiver design validation and production test
–– MIMO and multi-channel device test
Reference solutions
Application-specific reference solutions, a combination
of recommended hardware, software, and measurement
expertise, provide the essential components of a test system.
The following reference solutions include the M9381A PXI
VSG as a hardware component:
–– RF power amplifier/front end module characterization
and test, Reference Solution for the industry’s fastest
power amplifier test solution including envelope tracking
test, rapid waveform download, tight synchronization,
automated calibration and digital pre-distortion. For
more information, see www.keysight.com/find/
solution-padvt
–– LTE/LTE-Advanced multi-channel test, Reference
Solution for faster insight into carrier aggregation,
spatial multiplexing MIMO and beamforming designs.
For more information, see www.keysight.com/find/
solution-LTE
04 | Keysight | M9381A PXIe Vector Signal Generator – Data Sheet
Technical Specifications and Characteristics
Block diagram
M9300A PXIe Frequency Reference
(+13 dBm sine all
100 MHz Outs)
100 MHz
Out 1
100 MHz PLL
100 MHz
Out 2
3 dB
ExternalTriggerTrig 2 (front)
to PXI backplane
3 GHz to 6 GHz
Ref In
PLL
100 MHz
Out 4
10 MHz OCXO
TIMEBASE
10 MHz Out
OXCO Out
10 MHz
(10 MHz, +10 dBm
to 16 dBm, sine)
M9311A PXIe Digital Vector Modulator
3 dB
3 dB
850 MHz
RF/LO Out 1A
RF/LO Out 1B
RF/LO Out 2A
RF/LO Out 2B
Divide
by 1 or 2
100 MHz
Out 5
Divide 10 MHz
/10
by 10
3 dB
Banded
switched
filter
bank
Divide
by 1-2-4-8
100 MHz
Out 3
100 MHz
(1 to 110 MHz)
M9301A PXIe Synthesizer
100 MHz In(+13 dBm Typical
100 MHz
Out
(RF Outputs: 187.5 MHz to 6 GHz)
(-10 dBm to +10 dBm)
3 dB
3 dB
(+13 dBm
Typical
M9310A PXIe Source Output
IQ modulation bypass
LO In
RF
Filters
IQ modulation
(100 MHz to 6 GHz,
0 dBm to +5 dBm)
RF Out
(400 MHz to 6 GHz, -25 dBm to +5 dBm)
Q- In
(All IQ inputs DC to 400 MHz)
Q+ In
RF In
(1 MHz to 6 GHz)
(-5 dBm to +5 dBm)
Pulse
modulator
ALC &
power
control
RF
IF
LO
Pulse Mod Trigger
Trig 1 (Front Panel)
ALC Hold Trigger
PXI backplane
(-130 dBm to +19 dBm, 1 MHz to 5 GHz)
(-130 dBm to +18 dBm, >5 GHz to 6 GHz)
ALC
Coupler
Log Amp
I- In
6 GHz
I+ In
Limiter
RF Out
(All IQ outputs -1 V to +3.6 V Max)
I+ Out
RAM
100 MHz In
(+10 dBm typical)
Clocks
FPGA
Signal
processing
ASIC
I- Out
DACs &
signal
conditioning Q+ Out
Q- Out
100 MHz In
(+10 dBm typical)
100 MHz Out
(+10 dBm typical)
Trig 1 (Front panel)
Figure 5. M9381A PXIe vector signal generator block diagram with four modules consisting of the M9301A synthesizer, M9310A source output, M9311A digital vector
modulator, and optional M9300A frequency reference.
05 | Keysight | M9381A PXIe Vector Signal Generator – Data Sheet
Technical Specifications and Characteristics
Definitions for specifications
Temperatures referred to in this document are defined as follows:
–– Full temperature range = Individual module temperature
of ≤ 75 °C as reported by the module, and environment
temperature of 0 to 55 °C.
–– Controlled temperature range = Individual module
temperature of ≤ 55 °C as reported by the module, and
environment temperature of 20 to 30 °C.
Specifications describe the warranted performance of calibrated
instruments. Data represented in this document are specifications
under the following conditions unless otherwise noted.
–– Calibrated instruments have been stored for a minimum of
2 hours within the full temperature range
–– 45 minute warm-up time
–– Calibration cycle maintained
–– When used with Keysight M9300A frequency reference and
Keysight interconnect cables
Characteristics describe product performance that is useful in
the application of the product, but that is not covered by the
product warranty. Characteristics are often referred to as Typical
or Nominal values and are italicized.
–– Typical describes characteristic performance, which 80% of
instruments will meet when operated within the controlled
temperature range.
–– Nominal describes representative performance that is useful
in the application of the product when operated within the
controlled temperature range.
Recommended best practices in use
–– Use slot blockers and EMC filler panels in empty module slots
to ensure proper operating temperatures. Keysight chassis
and slot blockers optimize module temperature performance
and reliability of test.
–– Set chassis fan to high at environmental temperatures
above 45 °C.
–– Maintain temperature stability for best multi-channel phase
coherence
–– Set chassis fans to maximum
–– Maintain stable ambient temperature
–– Perform warm-up with session open and representative
waveform running
Additional information
–– Specifications use the normal PLL mode setting, unless
otherwise stated. Narrow loop bandwidth refers to
specifications using the best wide offset PLL mode setting
AGM938X_VAL_SYNTHESIZER_PLL_MODE_BEST_WIDE_
OFFSET, available in the M938x Vector Signal Generator/CW
Source Instrument Drivers versions 1.2.300 and later.
–– Performance described in this document applies for module temperature within ± 5 degrees of IQ alignment, unless
otherwise noted.
–– When configured for multi-channel, phase-coherent operation
(shared synthesizer configuration), instrument level warranted
specifications only apply to the M9381A which was previously
calibrated with the M9301A synthesizer, showing a valid
calibration indicator. For all other M9381A channels,
specifications revert to typical performance. If using an external LO distribution unit, such as the V2802A LO distribution network, specifications for all M9381A channels revert to
typical performance.
–– All graphs contain measured data from one unit and are
representative of product performance within the controlled
temperature range unless otherwise noted.
–– The specifications contained in this document are subject to
change.
06 | Keysight | M9381A PXIe Vector Signal Generator – Data Sheet
Technical Specifications and Characteristics
Frequency
Frequency range
Option F03
1 MHz to 3 GHz
Option F06
1 MHz to 6 GHz
Resolution
0.01 Hz
Frequency switching speed
Standard, nominal
List mode switching speed 1
Option UNZ, nominal
Normal loop bandwidth
Narrow loop bandwidth
≤ 5 ms
≤ 10 µs
≤ 10 μs
Arbitrary frequency change
≤ 5 ms
≤ 185 μs
≤ 240 μs
Frequency change < 100 MHz within a band 4
≤ 5 ms
≤ 115 μs
≤ 120 μs
≤ 5 ms
≤ 365 µs
≤ 365 µs
≤ 5 ms
≤ 265 µs
≤ 265 µs
Baseband frequency offset change 2
≤ 5 ms
≤ 250 µs
≤ 250 µs
Arbitrary frequency change
≤ 5 ms
≤ 2 ms
≤ 2.1 ms
Baseband frequency offset change
ALC off
ALC on
2
3
3
Arbitrary frequency change
Frequency change < 100 MHz within a band
Non-list mode switching speed
4
5
List mode
List mode channel parameters
80 parameters including RF frequency, power, modulation arb and baseband, ALC, power search, triggers
Dwell time
0 to 429 seconds
Number of points
1 to 3201
Triggering
Immediate, external, software, timer
1. Time from trigger input to frequency and amplitude settled within limits given below with digital modulation on and channel corrections enabled.
Specifications are for amplitudes lower than +17 dBm and using an M9036A embedded controller in an M9018A chassis.
2. Baseband offset frequency settled within 100 Hz. Baseband offset can be adjusted ± from carrier frequency within limits determined by RF
modulation bandwidth. Synthesizer frequency and amplitude are not changing and ALC off.
3. Carrier frequency settled within 1 ppm or 1 kHz, whichever is greater, and amplitude settled within 0.2 dB (within the controlled temperature range) or
within 0.5 dB (at the full temperature range). For frequency changes ≥ 1.6 GHz at carriers ≥ 3.2 GHz nominal frequency settling time within
± 0.05% of final frequency is 125 µs. Simultaneous carrier frequency and amplitude switching.
4. Frequency bands: One (1 to 400 MHz); Two (> 400 to < 750 MHz); Three (≥ 750 to < 1500 MHz); Four (≥ 1500 to < 3000 MHz);
Five (≥ 3000 to 6000 MHz).
5. Mean time from IVI command to carrier frequency settled within 1 ppm or 1 kHz whichever is greater and amplitude settled within 0.2 dB.
Simultaneous carrier frequency and amplitude switching.
07 | Keysight | M9381A PXIe Vector Signal Generator – Data Sheet
Technical Specifications and Characteristics
Frequency (continued)
Frequency reference (M9300A PXIe frequency reference module)
Reference outputs
100 MHz Out (Out 1 through Out 5)
Amplitude
≥ 10 dBm
Connectors
5 SMB snap-on
Impedance
50 Ω, nominal
13 dBm, typical
10 MHz Out
Amplitude
9.5 dBm, nominal
Connectors
1 SMB snap-on
Impedance
50 Ω, nominal
OCXO Out
Amplitude
11.5 dBm, nominal
Connectors
1 SMB snap-on
Impedance
50 Ω, nominal
Frequency accuracy
Same as accuracy of internal time base or external reference input
Internal timebase
Accuracy
± [(time since last adjustment x aging rate) ± temperature effects ± calibration accuracy]
Frequency stability
Aging rate
Daily
< ± 0.5 ppb/day, after 72 hour warm-up
Yearly
< ± 0.1 ppm/year, after 72 hours warm-up
Total 10 years
< ± 0.6 ppm/10yrs, after 72 hours warm-up
Achievable initial calibration accuracy (at time of shipment)
± 5 x 10-8
Temperature effects
20 to 30 °C
< ± 10 ppb
Full temperature range
< ± 50 ppb
Warm up
5 minutes over +20 to +30 °C, with respect to 1 hour
< ± 0.1 ppm
15 minutes over +20 to +30 °C, with respect to 1 hour
< ± 0.01 ppm
External reference input
Frequency
1 to 110 MHz, sine wave
Lock range
± 1 ppm, nominal
Amplitude
0 to 10 dBm, nominal
Connector
1 SMB snap-on
Impedance
50 Ω, nominal
08 | Keysight | M9381A PXIe Vector Signal Generator – Data Sheet
Technical Specifications and Characteristics
Amplitude
Output parameters
Settable range
Standard
Option 1EA
+10.7 to −130 dBm
+20 to −130 dBm
Resolution
ALC on 6
0.02 dB, nominal
I/Q mode, ALC off 7
0.02 dB, nominal
I/Q mode, ALC off, baseband offset change
0.001 dB, nominal
CW mode, ALC off
0.3 dB, nominal
Maximum output power
Frequency
Standard
Option 1EA
1 MHz to 5 GHz
+10 dBm
+19 dBm
> 5 to 6 GHz
+10 dBm
+18 dBm
List Mode Amplitude vs Time (2.2 GHz, ALC Off)
Switch from 1.8 GHz -40 dBm to 2.2 GHz +10 dBm
Amplitude Delta from Final Value (dB)
0.3
0.2
0.1
0
-0.1
-0.2
-0.3
0
1
2
3
4
Elapsed Time from External Trigger (msec)
Figure 6. List mode amplitude vs time showing fast settling time to specified level accuracy.
6.
Settable to 0.01 dB.
7.
After a power search.
5
09 | Keysight | M9381A PXIe Vector Signal Generator – Data Sheet
Technical Specifications and Characteristics
Amplitude (continued)
Amplitude switching speed
Standard, nominal
Option UNZ, nominal
Baseband power level change 9
≤ 5 ms
≤ 10 µs
ALC off
≤ 5 ms
≤ 105 µs
ALC on
≤ 5 ms
≤ 105 µs
Baseband power level change 9
≤ 5 ms
≤ 250 µs
Arbitrary power level change
≤ 5 ms
≤ 1.5 ms
List mode switching speed 8
Non-list mode switching speed
10
List mode
See frequency specification section for more detail
Absolute level accuracy in CW mode [ALC on] 11
Frequency
< Max power to −20 dBm
< −20 to −110 dBm
< −110 to −120 dBm
< −120 to −130 dBm
1 MHz to 3 GHz
± 0.4 dB
± 0.15 dB, typical
± 0.5 dB
± 0.15 dB, typical
± 0.7 dB
± 0.25 dB, typical
± 0.8 dB, nominal
> 3 to 6 GHz
± 0.5 dB
± 0.15 dB, typical
± 0.6 dB
± 0.25 dB, typical
± 1.0 dB
± 0.5 dB, typical
± 0.8 dB, nominal
-120 dBm Output Power Normalized Response
1
0.75
Power Error (dB)
0.5
0.25
0
-0.25
-0.5
-0.75
-1
0
1
2
3
4
5
6
Frequency (GHz)
Figure 7. Output power normalized response at –120 dBm.
8.
Time from trigger input to amplitude settled within 0.2 dB (within the controlled temperature range) or
within 0.5 dB (at the full temperature range). Carrier frequency is not changing. Measurements made with
the M9036A embedded controller in an M9018A chassis.
9.
Baseband offset amplitude settled within 0.2 dB. Baseband offset can be adjusted from 0 to –20 dB.
10. Mean time from IVI command to amplitude settled within 0.2 dB. Carrier frequency is not changing.
11. Specifications apply within the controlled temperature range. For temperatures outside this range,
absolute level accuracy degrades by ± 0.02 dB/°C.
10 | Keysight | M9381A PXIe Vector Signal Generator – Data Sheet
Technical Specifications and Characteristics
Amplitude (continued)
Absolute level accuracy (ALC off, relative to ALC on) 12
1 MHz to 5 GHz
± 0.25 dB, typical
> 5 to 6 GHz
± 0.62 dB, typical
Power search
13
Time
< 20 ms, nominal
Absolute level accuracy in digital I/Q mode (ALC on, relative to CW) 14
≤ 15 dBm
± 0.7 dB (± 0.25 dB, nominal)
≤ 10 dBm
± 0.2 dB
≤ 0 dBm
± 0.1 dB
Amplitude Repeatability +10 dBm ALC On
0.05
850 MHz
0.04
1900 MHz
2200 MHz
0.03
3500 MHz
5800 MHz
Delta from Initial (dB)
0.02
0.01
0
-0.01
-0.02
-0.03
-0.04
-0.05
0
20
40
60
Elapsed Time (minutes)
80
100
120
Figure 8. Amplitude repeatability at various carrier frequencies. Repeatability measures the ability of the
instrument to return to a given power setting after a random excursion to any other frequency and power setting.
It should not be confused with absolute level accuracy.
Relative Level Accuracy
CW mode, ALC On
0.6
0.85 GHz
1.8 GHz
0.4
2 GHz
Power error (dB)
2.2 GHz
3.5 GHz
0.2
5.8 GHz
0
-0.2
12. After a power search, with a single side-band
signal and with power search blanking on.
-0.4
-0.6
-120
-100
-80
-60
-40
Power Level (dBm)
Figure 9. Relative level accuracy at various carrier frequencies.
-20
0
20
13. Power search is an internal alignment routine
that improves level accuracy with ALC off.
14. QPSK waveform 4 MSa/s symbol rate.
Specifications apply within the controlled
temperature range.
11 | Keysight | M9381A PXIe Vector Signal Generator – Data Sheet
Technical Specifications and Characteristics
Amplitude (continued)
VSWR
1 MHz to 6 GHz
< 1.5:1, nominal
Maximum reverse power
1 MHz to 6 GHz
1 W, nominal
Max DC voltage
25 VDC, nominal
VSWR
1.50
0 dB Attn
1.45
30 dB Attn
Bypass Path
1.40
VSWR (X:1.0)
1.35
1.30
1.25
1.20
1.15
1.10
1.05
1.00
0
1
2
Figure 10. Measured VSWR from 1 MHz to 6 GHz.
3
Frequency (GHz)
4
5
6
12 | Keysight | M9381A PXIe Vector Signal Generator – Data Sheet
Technical Specifications and Characteristics
Spectral purity
Phase noise at 20 kHz offset
Normal loop bandwidth
1 GHz
−122 dBc/Hz, typical
2 GHz
−117 dBc/Hz, typical
3 GHz
−112 dBc/Hz, typical
6 GHz
−108 dBc/Hz, typical
Single Sideband Phase Noise in CW Mode
Normal Loop Bandwidth
-20
-30
Phase Noise (dBc/Hz)
-40
1GHz
-50
2GHz
-60
2.4GHz
3GHz
-70
5.8GHz
-80
6GHz
-90
-100
-110
-120
-130
-140
-150
-160
10 Hz
100 Hz
1 kHz
10 kHz
100 kHz
1 MHz
10 MHz
Frequency Offset From Carrier
Figure 11. Single sideband phase noise in normal loop bandwidth, CW mode from 10 Hz to 10 MHz,
offset at 1, 2, 2.4, 3, 5.8, and 6 GHz.
Single Sideband Phase Noise in CW Mode
Narrow Loop Bandwidth
-20
-30
-40
1GHz
Phase Noise (dBc/Hz)
-50
2GHz
-60
2.4GHz
-70
3GHz
5.8GHz
-80
6GHz
-90
-100
-110
-120
-130
-140
-150
-160
10 Hz
100 Hz
1 kHz
10 kHz
100 kHz
1 MHz
10 MHz
Frequency Offset From Carrier
Figure 12. Single sideband phase noise in narrow loop bandwidth, CW mode from 10 Hz to 10 MHz,
offset at 1, 2, 2.4, 3, 5.8, and 6 GHz.
13 | Keysight | M9381A PXIe Vector Signal Generator – Data Sheet
Technical Specifications and Characteristics
Spectral purity (continued)
Broadband noise floor
Range
1 MHz to 6 GHz
< −140 dBc/Hz, nominal, at +10 dBm output power level
Harmonics
Range
≤ 0 dBm
≤ 0 dBm
≤ +10 dBm
≤ +10 dBm
1 MHz to < 1 GHz
< −39 dBc
−43 dBc, typical
< −35 dBc
−37 dBc, typical
1 to 2.5 GHz
< −34 dBc
−38 dBc, typical
< −32 dBc
−34 dBc, typical
< −35 dBc
−38 dBc, typical
< −28 dBc
−31 dBc, typical
> 2.5 GHz
Nonharmonics
15
Nonharmonic miscellaneous spurious 16
< −70 dBc, nominal
Nonharmonic HET band mixing spurs (0 dBm)
< −67 dBc, nominal
Nonharmonic Frac−N
< −66 dBc, nominal
Subharmonics
1 MHz to 6 GHz
none
15. Non−harmonics include mixing spurs for frequencies below 400 MHz, synthesizer spurs, and other
miscellaneous chassis and power supply products, for offsets > 10 kHz.
16. With Keysight M9036A embedded controller.
14 | Keysight | M9381A PXIe Vector Signal Generator – Data Sheet
Technical Specifications and Characteristics
Analog modulation
Pulse parameters
Pulse on/off ratio 1 to 400 MHz
> 85 dB, typical
Pulse on/off ratio > 400 MHz to 6 GHz
> 95 dB, typical
Pulse on/off ratio with I/Q modulation
> 140 dB, nominal
Pulse rise/fall time
< 10 ns, nominal
Frequency modulation (Option UNT) 17
Maximum deviation
1.25 MHz
Resolution of deviation
0.1 Hz
Maximum rate
5 MHz
Phase modulation (Option UNT) 17
Maximum deviation
10 radians
Resolution of deviation
0.001 radians
Maximum rate
5 MHz
Pulse (Option UNT) 17
Rate
1 Hz to 1 MHz
Pulse on time
Multitone (Option UNT)
200 ns to 2 ms
17
Rate (tone separation)
100 Hz to 1 MHz
Number of tones
Frequency modulation (Option UNT)
2 to 16
17
Maximum deviation
1.25 MHz
Resolution of deviation
0.1 Hz
Maximum rate
5 MHz
17. With arbitrary waveforms. Sine, dual−sine, triangle, ramp, and square waveforms supported.
15 | Keysight | M9381A PXIe Vector Signal Generator – Data Sheet
Technical Specifications and Characteristics
Vector modulation
Residual carrier leakage 18
Frequency
Specifications
Typical
1 MHz to 5 GHz
< −55 dBc
< −62 dBc
< −51 dBc
< −58 dBc
Frequency
Specifications
Typical
1 to 850 MHz
< −43 dBc
< −54 dBc
> 850 MHz to 5 GHz
< −52 dBc
< −61 dBc
> 5 to 6 GHz
< −45 dBc
< −54 dBc
> 5 to 6 GHz
I/Q image suppression
18
I/Q baseband feed-through 18
Frequency
Specifications
1 to 400 MHz
< −65 dBc, typical
> 400 MHz to 3 GHz
< −80 dBc, typical
> 3 GHz
< −90 dBc, typical
RF modulation bandwidth with internal ARB
Option B04 (standard)
40 MHz
Option B10
100 MHz
Option B16
160 MHz
RF I/Q channel flatness
Bandwidth
1 MHz to 5.5 GHz
> 5.5 to 6 GHz
40 MHz BW
< ± 0.1 dB, typical
< ± 0.2 dB, typical
100 MHz BW
< ± 0.2 dB, typical
< ± 0.3 dB, typical
160 MHz BW
< ± 0.3 dB, typical
< ± 0.5 dB, typical
18. Measured with an SSB waveform with an I/Q scale factor of 0.25 for offsets ≤ 5O MHz, after executing
IQ alignment. Specifications apply at 625 kHz and 50 MHz offsets.
16 | Keysight | M9381A PXIe Vector Signal Generator – Data Sheet
Technical Specifications and Characteristics
Vector modulation (continued)
Corrected phase error
Bandwidth
1 GHz
3 GHz
40 MHz BW
± 0.25 °C, nominal
± 1.25 °C, nominal
100 MHz BW
± 0.65 °C, nominal
± 2.5 °C, nominal
160 MHz BW
± 0.9 °C, nominal
± 3.0 °C, nominal
Arbitrary waveform memory maximum playback capacity
Option M01 (standard)
32 MSa
Option M05
512 MSa
Option M10
1024 MSa
Channel-to-channel synchronization 19
Timing
Phase
Skew
≤ 500 ps, nominal
—
Jitter 20
≤ 45 ps, nominal
≤ 1 °, nominal
Repeatability 21
≤ 70 ps, nominal
≤ 1.5 °, nominal
Adjustment resolution
50 ps
0.05 °
Drift over 12 hours
20 ps, nominal
0.5 °, nominal
19. Multi-channel capability only supported with up to 8-channels when configured with a Keysight M9018A PXIe chassis, with FPGA version 1.05 or greater.
Characteristics measured at 400, 900, 2400, 5800 MHz. V2802A LO distribution network used for phase synchronization for more than 4 channels
20. Jitter indicates measurement-to-measurement variation and applies over short time interval at room temperature without resetting or reinitializing a driver
session.
21. Repeatability indicates stability of alignment between channels across power cycles and IVI sessions, with identical cabling and hardware settings
frequency, span, sample rate, etc.)
17 | Keysight | M9381A PXIe Vector Signal Generator – Data Sheet
Technical Specifications and Characteristics
Vector modulation (continued)
SSB Residual Carrier Leakage
SSB Image Rejection
after IQ alignment Scale = 0.25
-40
after IQ alignment Scale = 0.25
-40
-60
-70
80 MHz
-60
-70
-80
-80
-90
50 MHz
-50
Image Rejection (dBc)
Residual Carrier Leakage (dBc)
1 MHz
-50
-90
0
1
2
3
4
5
6
0
1
2
Frequency (GHz)
4
5
6
Figure 14. SSB image rejection at 1, 50, and 80 MHz offsets.
Figure 13. SSB residual carrier leakage.
I/Q Baseband Feed-through
SSB waveform
-50
3
Frequency (GHz)
RF I/Q Channel Flatness
Scale = 0.5
62-tone baseband waveform Scale = 0.5
1
0.85 GHz
0.85 GHz
1.8 GHz
1.9 GHz
2.2 GHz
3.5 GHz
5.8 GHz
1.9 GHz
-60
2.2 GHz
RF I/Q Channel Flatness (dB)
I/Q Baseband Feed-through (dBc)
1.8 GHz
3.5 GHz
5.8 GHz
-70
-80
-90
-100
-80
-60
-40
-20
0
20
40
Frequency Offset from Carrier (MHz)
Figure 15. I/Q baseband feed-through at various carrier frequencies.
60
80
0.5
0
-0.5
-1
-80
-60
-40
-20
0
20
40
Frequency Offset from Carrier (MHz)
Figure 16. RF I/Q channel flatness at various carrier frequencies.
60
80
18 | Keysight | M9381A PXIe Vector Signal Generator – Data Sheet
Technical Specifications and Characteristics
Format specific modulation data
3GPP W-CDMA performance data 22
Modulation type
QPSK
EVM (2 GHz, 1 DPCH, ≤ 5 dBm)
Channel distortion
23
0.57% rms, typical
ACLR
Power level
Offset
Adjacent 5 MHz
Alternate 10 MHz
0 dBm
Frequency
Spec (dBc)
Typical (dBc)
Spec (dBc)
Typical (dBc)
1 DPCH
1 carrier
900 MHz
−70
−72
−71
−72
Adjacent 5 MHz
Alternate 10 MHz
Adjacent 5 MHz
64 DPCH
1 carrier
Alternate 10 MHz
Adjacent 5 MHz
−71
−73
−72
−74
1800 to
2200 MHz
−70
−72
−70
−71
−71
−73
−72
−73
900 MHz
−69
−71
−69
−72
−71
−72
−71
−73
−68
−70
−68
−70
−70
−72
−71
−73
1800 to
2200 MHz
Alternate 10 MHz
Single Carrier WCDMA Adjacent Channel ACLR at 2 GHz
-60
64 DPCH
-62
1 DPCH
ACLR (dBc)
-64
-66
-68
-70
-72
-74
-76
-10
-5
0
5
10
Power Level (dBm)
Figure 17. Single carrier W-CDMA adjacent channel ACLR versus power level at 2 GHz.
Four Carrier WCDMA Adjacent Channel ACLR at 2 GHz
-54
-56
64 DPCH
-58
ACLR (dBc)
-60
-62
-64
-66
-68
-70
-10
-5
5 dBm
Configuration
0
5
10
Power Level (dBm)
Figure 18. Four carrier W-CDMA adjacent channel ACLR versus power level at 2 GHz.
22. W-CDMA characteristics apply at 900 MHz and between 1.8 to 2.2 GHz, 3.84 Mcps rate.
23. Specifications apply within the controlled temperature range.
19 | Keysight | M9381A PXIe Vector Signal Generator – Data Sheet
Technical Specifications and Characteristics
Format specific modulation data (continued)
GSM/EDGE performance data 24
GSM
EDGE
Modulation type
GMSK bursted
3pi/8-8PSK bursted
Modulation rate
270.833 ksps
70.833 ksps
EVM [ALC off]
±0.15 °C rms global phase error, typical
0.3%, typical
EVM [ALC on]
±0.15 °C rms, global phase error, typical
0.6%, typical
Output RF spectrum (ORFS)
Narrow loop bandwidth
Narrow loop bandwidth
Offset
GSM, typical
EDGE, typical
200 kHz
−37 dBc
−39 dBc
400 kHz
−66 dBc
−66 dBc
600 kHz
−71 dBc
−71 dBc
800 kHz
−76 dBc
−76 dBc
1200 kHz
−81 dBc
−81 dBc
1800 kHz
−80 dBc
−79 dBc
WLAN 802.11 performance data — single channel
EVM
Preamble only — narrow loop bandwidth
Power level
−7 dBm
0 dBm
+5 dBm
Typical
Nominal
Typical
Nominal
Typical
Nominal
802.11n, 20 MHz, 64 QAM
2.4 GHz
5.8 GHz
−52.5 dB
−44.6 dB
−53.2 dB
−45.8 dB
−52.7 dB
−45.2 dB
−53.4 dB
−45.8 dB
−51.3 dB
−41.3 dB
−52.1 dB
−42.8 dB
802.11n, 40 MHz, 64 QAM
2.4 GHz
5.8 GHz
−48.5 dB
−44.1 dB
−49.5 dB
−44.5 dB
−48.6 dB
−44.1 dB
−49.7 dB
−44.7 dB
−47.8 dB
−40.1 dB
−49.2 dB
−41.7 dB
802.11ac, 80 MHz, 256 QAM
5.8 GHz
−42.2 dB
−45.6 dB
−42.8 dB
−46.1 dB
−40.6 dB
−42.8 dB
802.11ac, 160 MHz, 256 QAM
5.8 GHz
−42.5 dB
−43.7 dB
−42.7 dB
−44.1 dB
−39.8 dB
−40.6 dB
Preamble, pilots & data - narrow loop bandwidth
Power level
−7 dBm, nominal
0 dBm, nominal
+5 dBm, nominal
802.11n, 20 MHz, 64 QAM
2.4 GHz
5.8 GHz
−54.4 dB
−46.5 dB
−54.7 dB
−46.9 dB
−54.5 dB
−43.7 dB
802.11n, 40 MHz, 64 QAM
2.4 GHz
5.8 GHz
−52.8 dB
−47.2 dB
−53.3 dB
−47.6 dB
−52.9 dB
−44.0 dB
802.11ac, 80 MHz, 256 QAM
5.8 GHz
−48.7 dB
−48.9 dB
−45.2 dB
802.11ac, 160 MHz, 256 QAM
5.8 GHz
−47.2 dB
−47.8 dB
−43.9 dB
24. GSM/EDGE characteristics apply 800 to 900 MHz, and 1800 to 1900 MHz, with 1 timeslot channel configuration.
20 | Keysight | M9381A PXIe Vector Signal Generator – Data Sheet
Technical Specifications and Characteristics
Format specific modulation data (continued)
WLAN 802.11 performance data — multi-channel25 EVM
Preamble only — narrow loop bandwidth, 0 dBm
2-channel, nominal
3-channel, nominal
4-channel, nominal
8-channel, nominal
802.11n, 20 MHz, 64 QAM
2.4 GHz
5.8 GHz
−52.4 dB
−45.6 dB
−50.8 dB
−44.3 dB
−50.9 dB
−45.1 dB
802.11n, 40 MHz, 64 QAM
2.4 GHz
5.8 GHz
−49.2 dB
−44.2 dB
−48.3 dB
−42.7 dB
−48.8 dB
−43.3 dB
802.11ac, 80 MHz, 256 QAM
5.8 GHz
−43.3 dB
−42.0 dB
−42.9 dB
-43.0 dB
802.11ac, 160 MHz, 256 QAM
5.8 GHz
−42.1 dB
−40.3 dB
−41.7 dB
-41.4 dB
Preamble, pilots & data — narrow loop bandwidth, 0 dBm
2-channel, nominal
3-channel, nominal
4-channel, nominal
802.11n, 20 MHz, 64 QAM
2.4 GHz
5.8 GHz
8-channel, nominal
−54.2 dB
−46.4 dB
−54.2 dB
−45.6 dB
−52.9 dB
−45.7 dB
802.11n, 40 MHz, 64 QAM
2.4 GHz
5.8 GHz
−52.8 dB
−47.1 dB
−52.7 dB
−46.1 dB
−51.7 dB
−45.3 dB
802.11ac, 80 MHz, 256 QAM
5.8 GHz
−46.8 dB
−45.4 dB
−44.7 dB
-44.0 dB
802.11ac, 160 MHz, 256 QAM
5.8 GHz
−45.4 dB
−43.0 dB
−43.3 dB
-41.5 dB
25. Multi-channel performance data applies when each channel is configured with its own independent synthesizer. Sharing a single synthesizer will degrade
EVM performance approximately 1 dB.
21 | Keysight | M9381A PXIe Vector Signal Generator – Data Sheet
Technical Specifications and Characteristics
Format specific modulation data (continued)
LTE FDD performance data — single channel 26 nominal
EVM
900 MHz
−52.0 dB (0.25%)
2 GHz
−50.0 dB (0.32%)
ACPR
23
Adjacent (< 5 dBm)
Alternate (< 5 dBm)
900 MHz
−68 dBc
−70 dBc
2 GHz
−67 dBc
−70 dBc
LTE FDD & LTE TDD performance data —
multi-channel 27
nominal
4x4 MIMO 28
8x8 MIMO 29
−50.5 dB (0.30%)
−51.5 dB (0.27%)
-53.9 dB (0.20%)
−50.0 dB (0.32%)
−50.5 dB (0.30%)
-51.1 dB (0.28%)
MIMO 28
MIMO 28
LTE FDD – EVM
2x2
900 MHz
2 GHz
MIMO 28
4x4
8x8 MIMO 29
LTE TDD – EVM
2x2
900 MHz
−51.0 dB (0.28%)
−50.7 dB (0.29%)
-56.7 dB (0.15%)
2 GHz
−49.8 dB (0.32%)
−49.7 dB (0.33%)
-55.7 dB (0.16%)
26. LTE FDD E-TM 1.1 and E-TM 3.1, 10 MHz, 64 QAM PDSCH, full resource block, ≤ +6 dBm.
27. MIMO performance data applies when each channel is configured with its own independent synthesizer. Sharing a single synthesizer will degrade EVM
performance approximately 1 dB.
28. LTE FDD/TDD MIMO R9 downlink, full filled 64 QAM 10 MHz (50 RB), at 0 dBm, open-loop spatial multiplexing transmission mode.
29. LTE FDD/TDD 10 MHz BW, DL, TM9 multi-layer, TM4 closed-loop spatial multiplexing transmission mode.
22 | Keysight | M9381A PXIe Vector Signal Generator – Data Sheet
Technical Specifications and Characteristics
Environmental and physical specifications
Temperature
Operating
Non-operating (storage)
Humidity 30
Shock/vibration
0 to 55 °C
−40 to +70 °C
Type tested at 95%, +40 °C (non-condensing)
30
Operating random vibration
Survival random vibration
Functional shock
Bench handling
Up to 15,000 feet (4,572 meters) 31
Altitude
Connectors
Type tested at 5 to 500 Hz, 0.21 g rms
Type tested at 5 to 500 Hz, 2.09 g rms
Type tested at half-sine, 30 g, 11 ms
Type tested per MIL-PRF-28800F
RF OUT
SMA female
EMC
Complies with European EMC Directive 2004/108/EC
– IEC/EN 61326-2-1
– CISPR Pub 11 Group 1, class A
– AS/NZS CISPR 11
– ICES/NMB-001
This ISM device complies with Canadian ICES-001.
Cet appareil ISM est conforme a la norme NMB-001 du Canada.
Warm-up time
45 minutes
Size
M9300A
M9301A
M9310A
M9311A
1 PXIe slot
1 PXIe slot
1 PXIe slot
2 PXIe slots
Dimensions
Module
Length
Width
Height
M9300A
210 mm
22 mm
130 mm
M9301A
210 mm
22 mm
130 mm
M9310A
210 mm 22 mm
130 mm
M9311A
210 mm 42 mm
130 mm
Weight
M9300A
M9301A
M9310A
M9311A
0.551 kg (1.215 lbs)
0.535 kg (1.179 lbs)
0.551 kg (1.215 lbs)
0.901 kg (1.986 lbs)
Power drawn from chassis
M9300A
M9301A
M9310A
M9311A
≤ 18 W
≤ 25 W
≤ 28 W
≤ 45 W
30. Samples of this product have been type tested in accordance with the Keysight Environmental Test Manual and verified to be robust against the environmental stresses of storage, transportation and end-use — those stresses include but are not limited to temperature, humidity, shock, vibration, altitude
and power-line conditions. Test methods are aligned with IEC 60068-2 and levels are similar to MIL-PRF-28800F Class 3.
31. At 15,000 feet, the maximum environmental temperature is de-rated to 52 °C.
23 | Keysight | M9381A PXIe Vector Signal Generator – Data Sheet
Technical Specifications and Characteristics
System requirements
Topic
Operating systems
Windows 7 (32-bit and 64-bit)
Processor speed
1 GHz 32-bit (x86), 1 GHz 64-bit (x64)
(no support for Itanium 64)
Available memory
4 GB minimum
8 GB or greater recommended
Available
disk space 32
1.5 GB available hard disk space, includes:
1 GB available for Microsoft .NET framework 3.5 SP1 33
100 MB for Keysight IO libraries suite
Video
Support for DirectX 9 graphics with 128 MB graphics memory recommended
(Super VGA graphics is supported)
Browser
Microsoft Internet Explorer 7 or greater
M938x vector signal generator/CW source instrument drivers
Keysight IO libraries
Version 16.3.17914 or later
Narrow loop bandwidth
Narrow loop bandwidth using the best wide offset PLL mode setting
AGM938X_VAL_SYNTHESIZER_PLL_MODE_BEST_WIDE_OFFSET requires
instrument drivers version 1.2.300.0 or later
32. Because of the installation procedure, less disk space may be required for operation than is required for installation.
33. NET framework runtime components are installed by default with Windows Vista and Windows 7. Therefore, you may not need this amount of available disk
space.
24 | Keysight | M9381A PXIe Vector Signal Generator – Data Sheet
Software
Instrument connection software
Keysight
IO library
The IO library suite offers a single entry point for connection to the
most common instruments including AXIe, PXI, GPIB, USB, Ethernet/
LAN, RS-232, and VXI test instruments from Keysight and other vendors.
It automatically discovers interfaces, chassis, and instruments. The
graphical user interface allows you to search for, verify, and update
IVI instrument and soft front panel drivers for modular and traditional
instruments. The IO suite safely installs in
side-by-side mode with NI I/O software.
Free software download at
www.keysight.com/find/iosuite
The PXI module includes a soft front panel (SFP), a software based
graphical user interface (GUI) which enables the instrument’s
capabilities from your PC.
Included on CD-ROM shipped with module
or online
Module setup and usage
Keysight soft
front panel
Programming
Driver
Development environments
lVI-COM
IVI-C
LabVIEW
MATLAB
Visual Studio
(VB.NET, C#, C/C++)
VEE
LabVIEW, LabWindows/CVI, MATLAB
Included on CD-ROM shipped with module
or online
Assists in finding the right instrument commands and setting correct
parameters. A simple interface includes documentation, examples,
syntax checking, command execution, and debug tools to build
sequences for integration in Excel, MATLAB, Visual Studio, LabVIEW,
VEE, and SystemVue.
Free software download at
www.keysight.com/find/commandexpert
Each module includes programming examples for
Visual Studio.net, LabVIEW, MATLAB, LabWindows,
and Keysight VEE Pro.
Included on CD-ROM shipped with module
or online
Signal Studio
Suite of flexible, easy-to-use, signal creation tools that provides
validated and performance optimized reference signals for commonly
used communications standards. It configures signals in an easy-touse, application specific graphical interface and enables you to scale
the capability and performance to meet your specific test needs.
Licensed software. For more information,
visit www.keysight.com/find/signalstudio
Waveform
Creator
Built around a drag-and-drop graphical user interface, Waveform
Creator enables quick development of multi-format, multi-track
custom waveforms to be used in the validation and test of digital
communications products
Licensed software. For more information,
visit www.keysight.com/find/m9099
SystemVue
System–level EDA software platform for designing communications
and defense systems. Used with the M9381A, SystemVue bridges the
gap between simulation and prototyping to reduce design iterations
and accelerate deployment of emerging wireless technologies.
Licensed software. For more information,
visit www.keysight.com/find/systemvue
MATLAB
Interactive tools and command-line functions for instrument control
and data analysis tasks such as signal processing, signal modulation,
and digital filtering.
Licensed software. For more information,
visit www.keysight.com/find/matlab
Programming assitance
Command
Expert
Programming
examples
Signal generation software
25 | Keysight | M9381A PXIe Vector Signal Generator – Data Sheet
Setup and Calibration Services
Assistance
One day startup
assistance
Gain access to a technical expert who will help you get started quickly with
the M9381A VSG and its powerful software tools. The flexible instruction
format is designed to get you to your first measurements and familiarize you
with ways to adapt the equipment to a specific application.
Included in base configuration
Calibration and traceability
Factory calibration
The M9381A VSG ships factory calibrated with an ISO-9002, NIST-traceable
calibration certificate.
Included in base configuration
Calibration cycle
A one year calibration cycle is recommended.
Calibration sites
– At Keysight Worldwide Service Centers
– On-site by Keysight
– By self-maintainers
For more information visit
www.keysight.com/find/infoline
N7800A calibration
and adjustment
software
The M9381A VSG is supported by Keysight’s calibration and adjustment
software. This is the same software used at Keysight service centers to
automate calibration. The software offers compliance tests for
ISO 17025:2005, ANSI/NCSL Z540.3-2006, and measurement uncertainty
per ISO Guide to Expression of Measurement Uncertainty.
Licensed software. For more information, visit
www.keysight.com/find/calibrationsoftware
Keysight calibration
status utility
The Keysight calibration status utility helps ensure your M9381A is calibrated
by managing the calibration interval and providing messages regarding
instrument and module calibration status.
Included in base configuration
26 | Keysight | M9381A PXIe Vector Signal Generator – Data Sheet
Support and Warranty
Warranty
Global warranty
Keysight’s warranty service provides standard coverage
for the country where product is used.
–– All parts and labor necessary to return to full
specified performance
–– Recalibration for products supplied originally
with a calibration certificate
–– Return shipment
Included
Standard
Return to Keysight warranty – 3 years
15 days typical turnaround repair service
Included
R-51B-001-5Z
Return to Keysight warranty – 5 years
15 days typical turnaround repair service
R-51B-001-3X
Express warranty
3 years
The express warranty upgrades the global warranty to provide, for 3 years,
a 5 day typical turnaround repair service in the US, Japan, China and many
EU countries.
Optional
R-51B-001-5X
Express warranty
5 years
The express warranty upgrades the global warranty to provide, for 5 years,
a 5-day typical turnaround repair service in the US, Japan, China and many
EU countries.
Optional
Core exchange
program
Keysight’s replacement core exchange program allows fast and easy module
repairs. A replacement core assembly is a fully functioning pre-calibrated
module replacement that is updated with the defective module serial number,
allowing the replacement module to retain the original serial number.
For qualified self maintainers in US only
Self-test utility
A self-test utility runs a set of internal tests which verifies
the health of the modules and reports their status.
Included in base configuration
Support
27 | Keysight | M9381A PXIe Vector Signal Generator – Data Sheet
Configuration and Ordering Information
Ordering information
Model
Description
Configurable options
M9381A
PXIe vector signal generator:
1 MHz to 3 or 6 GHz
Includes:
M9301A PXIe synthesizer
M9310A PXIe source output
M9311A PXIe digital vector modulator
One day startup assistance
Module interconnect cables
Software, example programs, and product
information on CD
Return to Keysight warranty – 3 years
Frequency
Base configuration
M9381A-F03
Frequency range: 1 MHz to 3 GHz
M9381A-B04
RF modulation bandwidth, 40 MHz
M9381A-M01
Memory, 32 MSa
M9381A-300
Required for warranted
specifications
PXIe frequency reference:
10 and 100 MHz
Adds M9300A PXIe frequency Reference:
10 and 100 MHz (M9300A module can support
multiple M9381A modular instruments)
M9381A-F03
1 MHz to 3 GHz
M9381A-F06
1 MHz to 6 GHz
Power
M9381A-1EA
High output power
Switching Speed
M9381A-UNZ
Fast switching
RF modulation bandwidth
M9381A-B04
40 MHz
M9381A-B10
100 MHz
M9381A-B16
160 MHz
Memory
M9381A-M01
32 MSa
M9381A-M05
512 MSa
M9381A-M10
1024 MSa
Other
M9381A-UNT
Analog modulation
M9381A-012
Phase coherency
M9381A-UK6
Commercial calibration certificate
with test data for M9381A
(M9301A, M9310A, M9311A)
M9300A-UK6
Commercial calibration certificate with test
data for M9300A (module only)
Related products in recommended configuration
1. M9037A
PXIe embedded controller
M9018A
18-slot PXIe chassis
Recommended configuration
28 | Keysight | M9381A PXIe Vector Signal Generator – Data Sheet
Configuration and Ordering Information
Software information
Accessories
Model
Description
Y1212A
Slot blocker kit: 5 modules
Standard compliant drivers IVI-COM, IVI-C, LabVIEW, MATLAB
Y1213A
PXI EMC filler panel kit: 5 slots
Supported application
development
environments (ADE)
VisualStudio (VB.NET, C#, C/C++), VEE,
LabVIEW, LabWindows/CVI, MATLAB
Y1243A
Cable kit for M9301A LO distribution
Y1299A
PXI solutions startup kits – MIMO solution
Keysight IO libraries
(version 16.3 or newer)
Includes: VISA libraries, Keysight connection expert, IO monitor
Keysight command expert
Instrument control for SCPI or IVI-COM drivers
Signal Studio software
(Playback on up to four
channels per license):
–– N76xxB-9TP,
transportable
perpetual license
–– N76xxB-9FP, fixed
perpetual license.
–– N7650B-2xx provides
5/50 waveform pack
licenses
–– M9950A Signal
Studio software
extension from
4 to 8 channels
N7600B W-CDMA/HSPA+
N7601B cdma2000 ®/1xEV-DO
N7602B GSM/EDGE/Evo
N7606B Bluetooth®
N7609B Global navigation satellite system
N7611B Broadcast radio
N7612B TD-SCDMA/HSDPA
N7615B Mobile WiMAX™
N7617B WLAN 802.11a/b/g/n/ac
N7623B Digital video
N7624B LTE/LTE-Advanced FDD
N7625B LTE/LTE-Advanced TDD
Supported operating
systems
Waveform Creator:
M9099T
M9099T-LIC
M9099T-AYA
M9099T-SVM
M9099T-DFW
M9099T-XXX-12M
SystemVue software:
W1461
SystemVue libraries:
W1918
W1910
W1916
W1911
W1917
W1915
W1919
W1914
W1905
W1716
Microsoft Windows XP (32-bit)
Microsoft Windows 7 (32/64-bit)
Waveform Creator
Core w/utility & multi-tone plug-ins (required)
Digital modulation plug-in
SystemVue plug-in
(requires SystemVue v2013.08 or later)
File based write unencrypted waveform
license
Adds premium support for 1 year
SystemVue Architect
LTE-Advanced
LTE
3G (GSM/EDGE/CDMA/cdma2000 ®/
W-CDMA/HSPA+)
WiMAX ™ 802.16e
WLAN 802.11a/b/g/n/ac
mmWave WPAN
Global navigation satellite system
DVB-x2
Radar
Digital predistortion builder
Related products
Model
Description
M9380A
PXIe CW source
M9300A
PXIe frequency reference
M9391A
PXIe vector signal analyzer
Accesories
M9021A
PCIe® cable interface
M9045B
PCIe express card adaptor for laptop connectivity
Y1200B
PCIe cable for laptop connectivity
M9048A
PCIe desktop adaptor for desktop connectivity
Y1202A
PCIe cable for desktop connectivity
Advantage services: Calibration and warranty
Keysight Advantage Services is committed to your success throughout
your equipment’s lifetime
R-51B-001-5Z
Return to Keysight warranty – 5 years
R-51B-001-3X
Express warranty – 3 years
R-51B-001-5X
Express warranty – 5 years
N7800A
Calibration & adjustment software
29 | Keysight | M9381A PXIe Vector Signal Generator – Data Sheet
myKeysight
www.keysight.com/find/mykeysight
A personalized view into the information most relevant to you.
www.pxisa.org
PCI eXtensions for Instrumentation (PXI) modular instrumentation delivers a
rugged, PC-based high-performance measurement and automation system.
Three-Year Warranty
www.keysight.com/find/ThreeYearWarranty
Keysight’s commitment to superior product quality and lower total cost
of ownership. The only test and measurement company with three-year
warranty standard on all instruments, worldwide.
Keysight Assurance Plans
www.keysight.com/find/AssurancePlans
Up to five years of protection and no budgetary surprises to ensure your
instruments are operating to specification so you can rely on accurate
measurements.
www.keysight.com/go/quality
Keysight Technologies, Inc.
DEKRA Certified ISO 9001:2008
Quality Management System
Keysight Infoline
www.keysight.com/find/service
Keysight’s insight to best in class information management. Free access to
your Keysight equipment company reports and e-library.
Keysight Channel Partners
www.keysight.com/find/channelpartners
Get the best of both worlds: Keysight’s measurement expertise and product
breadth, combined with channel partner convenience.
“PCIe” and “PCI EXPRESS” are registered trademarks and/or service marks of PCI-SIG.
cdma2000 is a registered certification mark of the Telecommunications Industry Association.
For more information on Keysight
Technologies’ products, applications or
services, please contact your local Keysight
office. The complete list is available at:
www.keysight.com/find/contactus
Americas
Canada
Brazil
Mexico
United States
(877) 894 4414
55 11 3351 7010
001 800 254 2440
(800) 829 4444
Asia Pacific
Australia
China
Hong Kong
India
Japan
Korea
Malaysia
Singapore
Taiwan
Other AP Countries
1 800 629 485
800 810 0189
800 938 693
1 800 11 2626
0120 (421) 345
080 769 0800
1 800 888 848
1 800 375 8100
0800 047 866
(65) 6375 8100
Europe & Middle East
Austria
Belgium
Finland
France
Germany
Ireland
Israel
Italy
Luxembourg
Netherlands
Russia
Spain
Sweden
Switzerland
Bluetooth and the Bluetooth logos are trademarks owned by Bluetooth SIG, Inc., USA
and licensed to Keysight Technologies, Inc.
WiMAX and Mobile WiMAX are US trademarks of the WiMAX Forum.
www.keysight.com/find/m9381a
www.keysight.com/find/modular
United Kingdom
0800 001122
0800 58580
0800 523252
0805 980333
0800 6270999
1800 832700
1 809 343051
800 599100
+32 800 58580
0800 0233200
8800 5009286
800 000154
0200 882255
0800 805353
Opt. 1 (DE)
Opt. 2 (FR)
Opt. 3 (IT)
0800 0260637
For other unlisted countries:
www.keysight.com/find/contactus
(BP-04-16-15)
This information is subject to change without notice.
© Keysight Technologies, 2012-2015
Published in USA, July 10, 2015
5991-0279EN
www.keysight.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement