Datasheets

Datasheets
D1000 SERIES
RS-232/422 POINT-TO-POINT DATA TRANSCEIVER
PRODUCT SPECIFICATION
FEATURES
• Meets EIA RS-232/422 Specifications (Simplex or Duplex)
• Meets NEMA TS-1/TS-2 & Caltrans Specifications
(Temperature/Humidity, Shock/Vibration, and Voltage
Transient Protection)
• Point-to-Point Topology
• Transparent to Data Encoding / Compatible with
Major Data Protocols
D
• Data rates up to 1.5 Mbps
DESCRIPTION
The IFS D1000 series data transceivers provide point-to-point
transmission of simplex or duplex EIA RS232/RS-422 data signals
over one or two optical fibers. The transceivers are transparent to data
encoding allowing for broad-range compatibility. The transceivers are
also compatible with the IFS D2100 series drop and repeat data
transceivers when used as line terminating devices. Models within this
series are available for use with multimode or single-mode optical
fiber. Plug-and-play design ensures ease of installation requiring no
electrical or optical adjustments. Each transceiver incorporates power
and transmit/receive data status indicating LED’s for monitoring
proper system operation. The modules are available in either
stand-alone or rack mount versions.
• No In-field Electrical or Optical Adjustments Required
• Power, Transmit and Receive Data Status LED Indicators
• Integrated WDM for Greater Product Reliability
• Automatic Resettable Solid-State Current Limiters
• Hot-Swappable Rack Modules
• Distances up to 37 Miles (60 km)
APPLICATION EXAMPLES
• Access Control Systems
• Building Automation and Environmental Control Systems
• Computer/Data Equipment
• Fire & Alarm Systems
• Traffic Signal Control Equipment
• Lifetime Warranty
ORDERING INFORMATION
PART
NUMBER
SINGLE-MODE
9/125µm
OPTIONS
OPTICAL
FIBERS
REQUIRED PWR BUDGET
MAX.
DISTANCE*
RS-232/RS-422 Transceiver (850 nm)
2
14 dB
2 miles (3.5 km)
RS-232/RS-422 Transceiver (850/1310 nm)
RS-232/RS-422 Transceiver (1310/850 nm)
1
14 dB
2 miles (3.5 km)
D1020
RS-232/RS-422 Transceiver (1310 nm)
2
13 dB
8 miles (13 km)
D1030
RS-232/RS-422 Transceiver (1310 nm)
2
20 dB
37 miles (60 km)
D1030WDMA
RS-232/RS-422 Transceiver (1310 nm)
1
20 dB
D1030WDMB
RS-232/RS-422 Transceiver (1550 nm)
37 miles (60 km)
37 miles (60 km)
D1010
MULTIMODE
62.5/125µm**
DESCRIPTION
D1010WDMA
D1010WDMB
20 dB
PS-12VDC 12 Volt DC Plug-in Power Supply (Included)
PS-12VDC-230 12 Volt DC Plug-in Power Supply, 230 VAC Input (Included if specified at time of order)
Add ‘-R3’ to Model Number for R3 Rack Mount - No Charge (Requires R3 Rack purchased separately)
Add ‘-C’ for Conformally Coated Printed Circuit Boards (Extra charge, consult factory)
* Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. ** For 50/125 Fiber, subtract 4 dB from Optical Power Budget.
D1000 SERIES
RS-232/422 POINT-TO-POINT DATA TRANSCEIVER
TECHNICAL SPECIFICATION
SPECIFICATIONS
ELECTRICAL & MECHANICAL
DATA
Surface Mount:
Rack:
12 VDC @ 150 mA
From Rack
Number of Rack Slots:
Current Protection:
1
Automatic Resettable Solid-State Current
Limiters
Meets IPC Standard
Data Interface:
RS-232 (data lines only) or
RS-422 (See note)
Data Rate:
DC-1.5 Mbps (NRZ)
Operating Mode:
Bit Error Rate:
Asynchronous, simplex or full duplex
<1 in 109
Circuit Board:
Size (in./ cm.) (LxWxH):
Surface Mount:
4.2 x 3.5 x 1.0 in., 10.7 x 8.9 x 2.5 cm.
Rack Mount:
Shipping Weight:
WAVELENGTH
7.0 x 4.9 x 1.0 in., 17.8 x 12.5 x 2.5 cm.
< 2 lbs./0.9 kg
D1010:
D1010WDMA:
850 nm, Multimode
850/1310 nm, Multimode
ENVIRONMENTAL
D1010WDMB:
D1020:
1310/850 nm, Multimode
1310 nm, Multimode
MTBF:
Operating Temp:
> 100,000 hours
-40° C to +74° C
D1030:
D1030WDMA:
D1030WDMB:
1310 nm, Single-mode
1310 nm, Single-mode
1550 nm, Single-mode
Storage Temp:
Relative Humidity:
-40° C to +85° C
0% to 95% (non-condensing)†
NOTE: The D1010 Series is compatible with some RS-485 (4 wire) systems.
Consult factory for application.
NUMBER OF FIBERS
D1010:
D1010WDMA:
D1010WDMB:
D1020:
2
1
1
2
D1030:
D1030WDMA:
D1030WDMB:
2
1
1
† May be extended to condensation conditions by adding suffix ‘–C’
to model number for conformal coating.
AGENCY COMPLIANCE
CONNECTORS
Optical:
Data and Power:
ST
Terminal Plug with screw clamps
Federal Supply Schedule
MADE IN THE USA
Contract No. GS-07F-0049M
OPTICAL POWER BUDGET
FIBER
TRANSCEIVER
SENSITIVITY
OUTPUT
WAVELENGTH
MODEL
D1010
D1010WDMA
D1010WDMB
850 nm
Multimode
62.5/125µm**
MAX.
DISTANCE*
14 dB
2 miles (3.5 km)
13 dB
8 miles (13 km)
20 dB
37 miles (60 km)
20 dB
37 miles (60 km)
20 dB
37 miles (60 km)
25 µw
(-16 dBm)
D1020
1310 nm
OPTICAL
PWR BUDGET
1 µw
(-30 dBm)
20 µw
(-17 dBm)
D1030
Single-mode
9/125µm
100 µw
(-10 dBm)
D1030WDMA
D1030WDMB
* Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. ** For 50/125 Fiber, subtract 4 dB from Optical Power Budget.
SYSTEM DESIGN
up to 2 miles
(3.5 km)
D1010
ifs
D1010
International
ifs
Fiber
Systems
Incorporated
203.426.1180
RS-232
or
RS-422*
Host
International
Fiber
Systems
Incorporated
203.426.1180
2 Fibers
62.5/125µm MM
RS-232
or
RS-422*
Remote
1. Point to point (dual fiber)
D1010WDMA
ifs
*Note: Unit can be used for transmission of
RS-232 or RS-422, but not simultaneously
up to 2 miles
(3.5 km)
International
ifs
Fiber
Systems
Incorporated
203.426.1180
RS-232
or
RS-422*
Host
D1010WDMB
International
Fiber
Systems
Incorporated
203.426.1180
1 Fiber
62.5/125µm MM
RS-232
or
RS-422*
Remote
2. Point to point (single fiber)
Due to our continued effort to advance technology, product specifications are subject to change without notice.
06/16/03
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement