VGA WUXGA to 1080p HDMI
Video Scaler # 15319
Operation Manual
Introduction
The VGA to HDMI Video Scaler is designed to scale an analog video signal from a PC source to a digital HDMI output in a wide-range of HD and PC resolutions (up to 1080p/WUXGA RB). In addition to video scaling, the unit can convert an analog stereo audio input to digital and embed it in the HDMI output as 2-channel LPCM. This unit allows the user to select a wide range of output resolutions and features an auto adjustment feature for optimal picture quality.
Features
• HDMI and DVI 1.0 compliant
• Scales PC resolutions to SD/HD or PC resolutions
• Automatically detects the setting of the connected display and outputs
the corresponding resolutions and refresh rate when the NATIVE output
is selected
• Supports high resolution output:
- PC: VGA, SVGA, XGA, SXGA, UXGA, WXGA, WSXGA, WUXGA(RB)
- SD/HD: 480i, 576i, 480p, 576p, 720p, 1080i, 1080p
• Supports embedding of the stereo analog input and PC video to single
HDMI output
Applications
• Integrate an analog PC device into a digital HDMI system
• Analog to Digital video/audio signal conversion
• Display PC video on a High-Definition HDMI display
System Requirements
Source devices such as a PC or laptop with a D-sub 15-pin connector and an HDMI equipped display.
Operation Controls and Functions
Front Panel
1. SERVICE:
Manufacturer use only.
2. HDMI OUT:
Connect the HDMI output to the HDMI input of a display or AV receiver.
3. AUTO ADJUST:
Press this button to auto adjust the image position when it does not fit the screen properly.
RESOLUTION:
Repeatedly press this button to cycle through the resolutions to select the required output (see section on Supported
Resolutions).
720P:
Press both buttons simultaneously to immediately switch the output resolution to 720p@60Hz
Back Panel
1. POWER LED:
When the unit is connected to a power supply the LED will illuminate and the unit will switch ON automatically.
2. DC 5V:
Connect the DC power supply to the unit and plug the adaptor into an AC wall outlet.
3. PC IN:
Connect to an source device such as PC or laptop with D-sub 15-pin cable.
4. AUDIO IN:
Connect the 3.5mm mini-jack input to the analog audio output port of the source device.
Specifications
Input Ports
Output Port
Input Resolution
Output Resolution
Power Supply
1×VGA (D-sub 15-pin), 1×3.5
mm Mini-jack
1×HDMI
Up to WUXGA (1920×1200@60RB)
Up to 1080p & WUXGA (1920×1200@60RB)
5V/2.6A DC (US/EU standards, CE/FCC/UL certified)
Dimensions
Weight
Chassis Material
Silkscreen Color
102mm(W)×111mm(D)×25mm(H)
244g
Aluminum
Black
Operating Temperature 0 ̊C ~ 40 ̊C / 32 ̊F ~ 104 ̊F
Storage Temperature −20 ̊C ~ 60 ̊C / −4 ̊F ~ 140 ̊F
Relative Humidity
Power Consumption
20 ~ 90 % RH (non-condensing)
4.6W
Supported Resolution
INPUT(PC)
VGA (640×480@60/72/75Hz)
OUTPUT(HDMI)
Native
SVGA (800×600@56/60/72/75Hz) 640×480@60Hz
XGA (1024×768@60/70/75Hz) 800×600@60Hz
XGA+ (1152×864@75Hz)
1280×720@60Hz
1024×768@60Hz
1280×1024@60Hz
1280×768@60/60Hz (RB)
1280×800@60/60Hz (RB)
1600×1200@60Hz
1366×768@60Hz
1280×960@60Hz
1280×1024@60/75Hz
1360×768@60Hz
SXGA (1400×1050@60Hz)
WXGA (1440×900@60Hz)
UXGA (1600×1200@60Hz)
WSXGA (1680×1050@60Hz)
1920×1080@60Hz
1920×1200@60Hz (RB)
1680×1050@60Hz
1920×1200@60Hz (RB)
1280×800@60Hz
1440×900@60Hz
1400×1050@60Hz
1600×900@60Hz
480i@60Hz
480p@60Hz
720p@60Hz
1080i@60Hz
1080p@60Hz
576i@50Hz
576p@50Hz
720p@50Hz
1080i@50Hz
1080p@50Hz
Connection Diagram