AutomationDirect automation equipment Warning

Below you will find brief information for automation equipment. This equipment is designed for safe operation and to minimize the risk of potential safety problems. You should follow applicable local and national codes that regulate the installation and operation of your equipment. These codes vary from area to area and usually change with time. It is your responsibility to determine which codes should be followed, and to verify that the equipment, installation, and operation is in compliance with the latest revision of these codes.

PDF Download
Document
Automation Equipment - Warning | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Safe operation
  • Compliance with codes
  • Minimizing safety risks
  • Not fault-tolerant
  • Not for high-risk activities
  • Constant improvement
  • Trademarks
  • Copyright

Frequently asked questions

You should follow all applicable local and national codes that regulate the installation and operation of your equipment. These codes vary from area to area and usually change with time. It is your responsibility to determine which codes should be followed, and to verify that the equipment, installation, and operation is in compliance with the latest revision of these codes.

Equipment damage or serious injury to personnel can result from the failure to follow all applicable codes and standards.

Our products are not fault-tolerant and are not designed, manufactured or intended for use or resale as online control equipment in hazardous environments requiring fail-safe performance, such as in the operation of nuclear facilities, aircraft navigation or communication systems, air traffic control, direct life support machines, or weapons systems, in which the failure of the product could lead directly to death, personal injury, or severe physical or environmental damage ("High Risk Activities"). AutomationDirect specifically disclaims any expressed or implied warranty of fitness for High Risk Activities.
Preparing document for printing…
0%