附件安装指南(英文版)

附件安装指南(英文版)
Atlas Time Saving Devices
Accessory Guide
Mounting Accessories
©2013 Atlas Sound L.P. All rights reserved. Atlas Sound is a trademark of Atlas Sound L.P. All other trademarks are the property of their respective owners.
ATS004730 RevA 9/13
Listed below are the various ways to mount the TSD and the optional
accessories that can be purchased.
1.
2.
Velcro™ - Each unit includes two 2" x 2" pieces of industrial-grade Velcro™ with adhesive backing to adhere to any flat surface. Clean all surfaces before applying the adhesive side of the Velcro™.
Multi Mount Plate - Each TSD includes a versatile multi-position mounting plate. This plate allows the TSD to be mounted to any surface; but is ideal for use with rear rack rails or side rack hat channels. Use the included M3 x 4mm screws to install the plate on the TSD. Note: Only use the included M3 x 4mm screws as other screws may be too long and will cause internal damage to the
TSD. The multi-position mounting plate is a new addition being included with TSDs. If the TSD being used did not include the mounting plate, contact Atlas customer service at 1-800-876-3333.
3.
Panel Mount Brackets - Atlas Sound offers an optional set of “L” mounting brackets. Remove two of the screws from the front panel, align with the holes on the brackets, and secure the screws to install. The brackets are not identical; there is one for the Right and one for the Left.
4.
TSD-RMK Optional 19" Width Rack Mount Kit - For 19" rack mounting, Atlas Sound offers an optional rack mount kit, the
TSD-RMK. This rack mount kit can support up to four TSD units.
The kit includes three blank panels designed to fill any unused slots. Use the included hardware to mount the TSD into the rack mount kit using the top mount screw holes on the TSD.
(M3 x 4mm)
(M3 x 4mm)
1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
AtlasSound.com
1/2
Mounting Accessories
5.
TSD-RMKHR Optional Half Width Rack Mount Kit - Atlas Sound offers an optional rack mount kit that can be used in half width rack
applications including the Atlas Sound WMA-HR and AWR-HR models. The TSD-RMKHR can support up to two TSDs. Included is an extra blank panel to fill one of the spaces if only one TSD is being used.
All front panel level controls feature a removable knob that can be
replaced with an included security cover. Follow these steps to prevent
potentiometer damage or unwanted changes.
1.
Knob Installation - Turn the potentiometer shaft fully
counter-clockwise. Align the knob indicator to the lowest setting on the panel and the potentiometer shaft slot. Carefully press the knob onto the potentiometer shaft. Do not force or damage may occur to the potentiometer.
6.
TSD-RRMK Optional Rear Rack Mounting Kit - For complete flexibility in mounting a TSD or TSD external power supplies the optional TSD-RRMK is available. The TSD-RRMK can support mounting of either two larger TSDs with external power supplies or
up to 4 TSD models. Note: Only use the included M3 x 4mm screws as other screws may be too long and will cause internal damage to the TSD.
2.
Security Cover Installation - Remove the knob from the panel and insert the cover. Small pliers may be required to remove the knobs. Align the security cover to the level control panel hole. Push the cover into the hole until it snaps into place. Do not force or damage may occur to the potentiometer.
ATS004730 RevA 9/13
©2013 Atlas Sound L.P. All rights reserved. Atlas Sound is a trademark of Atlas Sound L.P. All other trademarks are the property of their respective owners.
Knob and Security Cover Accessories
1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
Cable Management Accessories
All TSD models feature a simple but effective cable management system.
Each TSD is shipped with two cable wrap ties. Remove one of the screws
on the rear of the TSD run the screw thru the cable wrap tie head and
resecure the screw. Wrap the tie around the cables.
AtlasSound.com
2/2
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising