Process Wiring

Process Wiring
THE FULL RANGE FOR
PROCESS
AUTOMATION
www.turck.com
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Process
Automation
PROCESS WIRING
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K2
TURCK
Process Wiring Products
TURCK Process Wiring Solutions
This catalog contains products from TURCK's extensive line of industrial wiring products that are optimized
for process applications. The receptacles, drop cords, junction boxes, home-run cables and accessories
described within, comprise a process wiring system designed for the demanding conditions of process
applications.
• Quick-disconnect design eliminates mis-wiring and speeds installation.
• Instrument receptacles, drop cords, junction boxes and home-run cordsets reduce multiple cable runs.
• Shielded-twisted pair construction serves analog and HART applications.
• Cables with premium PVC insulation provide superior chemical resistance and flexibility.
• Choice of stainless steel or nickel-plated brass hardware.
• Rated and approved for installation in process applications.
• Many products are FM approved for installations in hazardous locations.
K3
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
2-Wire Analog or HART Control Circuits
M12 eurofast ®
Page
7/8" minifast ®
Page
M23 multifast ®
Page
Part Number Keys
K12
Part Number Keys
K43
Home Run Cordsets
K85
Drop Cordsets
K15
Drop Cordsets
K47
Receptacles with Cable
K93
Receptacles with Cable
K20
Receptacles with Cable
K55
Receptacles with Leads
K95
Receptacles with Leads
K27
Receptacles with Leads
K63
Junction Boxes
K33
Explosionproof Receptacles
K73
"Y" Fitting Receptacles
K77
Junction Boxes
K79
Additional Analog or Discrete Control Circuits
M12 eurofast
Page
7/8", 1", & 1-1/8" minifast
Page
M23 multifast
Page
Home Run Cordsets
K173
Part Number Keys
K98
Part Number Keys
K117
Drop Cordsets
K101
Drop Cordsets
K121
Receptacles with Cable
K105
Receptacles with Cable
K129
Receptacles with Leads
K109
Receptacles with Leads
K144
Junction Boxes
K113
Explosionproof Receptacles
K161
"Y" Fitting Receptacles
K169
Junction Boxes
K171
NAMUR Circuits
K176
extremelife ® Cordsets
K194
General Accessories
K206
reelfast ® Cable Selection Guide
K236
Reference-Standards
K245
Installation Instructions
K252
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K4
TURCK
Process Wiring Products
Code Requirements for Flexible Process Wiring Products
Ordinary (Nonhazardous) Locations
Type ITC cable, or Instrumentation Tray Cable, provides a
cost effective alternative for installation of low power
instrumentation and control circuits. The National Electrical
Code's (NEC) Article 727 permits the use of ITC- rated
cables “in industrial establishments where the conditions of
maintenance and supervision ensure that only qualified
persons service the installation”. It may be used in
“instrumentation and control circuits operating at 150 volts
or less and 5 amps or less.” Permitted uses include
installation in cable trays or basket trays (Figure 1), or as
Exposed Run wiring in specified circumstances.
Figure 1
One of the permitted uses as of ITC cable is illustrated in Figure 2. NEC, Article 727.4(5) allows ITC cable without metallic
sheath or armor between cable tray and equipment in lengths not to exceed 15 m (50 ft.), where the cable is supported and
protected against physical damage using mechanical protection, such as struts, angles, or channels.
Figure 2
50 ft.
Mechanically
Protected
Figure 3
Supported Every 6 ft.
Another permitted use of ITC cable that increases flexibility is
illustrated in Figure 3. NEC Article 727.4 (4) allows ITC cable
to be used where enclosed in a smooth metallic sheath,
continuous corrugated metallic sheath, or interlocking tape
armor applied over the nonmetallic sheath in accordance
with 727.6. The cable shall be supported and secured at
intervals not exceeding 1.8 m (6 ft.).”
When using armored cable, there is no requirement for
further mechanical protection or a length limitation. When
using ITC cable that complies with the requirements of NEC
727.4(6) no further protection is required.
K5
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
Code Requirements for Flexible Process Wiring Products
Ordinary (Nonhazardous) Locations
NEC 727.4(6) allows the installation of ITC cable that complies with the crush and impact of Type MC cable between the
cable tray and equipment in lengths not to exceed 15 m (50 ft.) without additional protection. Cable meeting this
requirement is identified as "Exposed Run" or "ER" (Figure 1).
This concept enables convenient wiring
methods, given that drops from a cable
tray may be made without additional
auxiliary trays or raceways.
Additionally, ITC cable uses 300 volt
insulation, resulting in smaller diameter,
more flexible cable, with no
requirement for special (e.g. Class 2)
power supplies. When the ITC cable
concept is combined with the TURCK
process wiring system, the result is an
extremely flexible and cost-effective
system for process wiring.
The basic building blocks of the system
are device receptacles, junction boxes,
and molded cordsets.
Figure 1
50 ft.
Exposed Run
Figure 2
Armored Cable
Any Length
Any Length
50 ft.
Exposed Run
Exposed Run
50 ft.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K6
TURCK
Process Wiring Products
The TURCK process wiring system provides an integrated, code-compliant wiring method
that adds the benefits of quick-disconnects to the ITC cable installation concepts.
Receptacles with 1/2-14NPT and 3/4-14NPT threads,
as well as M20x1.5, easily extend the benefits of
quick-disconnect wiring to most process instruments.
Junction boxes can significantly consolidate field wiring. They are
available in metal or nylon housings with 4 or 8 ports and home-run
quick-disconnects or integral home-run cables.
Molded quick-disconnect cordsets, using ITC cable,
provide the ratings and performance characteristics
required for process applications.
K7
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
Hazardous Locations
Even more value can be derived from the TURCK process wiring system in hazardous locations.
The system is now FM approved for use in Class I, Divisions 1 and 2 when installed per TURCK
drawing QCF-00147 and CSA certified when installed per TURCK control drawing Ni-2.404.
Contact TURCK for a copy of the approval documents or visit www.turck.com/fmcd.
Intrinsically Safe Circuits
Class I, Division 1
Hazardous Location
Intrinsically safe circuits may be wired
using any of the wiring methods suitable
for unclassified locations. The use of
connectors is allowed as intrinsically safe
circuits are safe against faults, including
opening, shorting or grounding.
Nonhazardous
Location
Intrinsically
Safe Apparatus
Intrinsically
Safe Barrier
The same requirements for mechanical
protection and length limitations apply as
in nonhazardous locations.
Nonincendive Equipment*
Class I, Division 2
Hazardous Location
Nonincendive
Equipment
Nonhazardous
Location
FM:
ITC cable is a recognized Division 2 wiring
method. NEC in Article 501.10 (B)(1)(5) states
“Type ITC cable as permitted in 727.4". This is
further reinforced by Article 727.4 (3), which
states that ITC cable is permitted “in hazardous
locations as permitted in 501.10,...”.
The same requirements for mechanical
protection and length limitations apply as in
nonhazardous locations.
CSA:
Canadian installations require the use of specific
cable types for non-intrinsically safe circuits in
Class I, Division 2 areas. TURCK offers CMX-HL
cables for unprotected cable runs and CIC cable
(Control and Instrumentation Cable) for cable
runs in cable trays.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K8
TURCK
Process Wiring Products
Quick-disconnects that do not require a tool to disengage are considered “normally arcing”. They are not
allowed to be used in Division 2 for incendive circuits without additional protection.
lokfast™ guards enable the use of quick-disconnect technology in Class I, Division 2 hazardous locations.
lokfast guards render quick-disconnects not “normally arcing” by:
- Eliminating access to the coupling nut making disconnection impossible.
- Warning the user to disconnect power before removing.
- Requiring a tool for removal.
lokfast guards are available for 7/8-16UN minifast ® and M12 eurofast ® molded and
field-wireable connectors.
Optional M23 multifast ® home-run connectors with set screw locks also render a
connection not “normally arcing”.
Class I, Division 2
Hazardous Location
lokfast guards (or integrally
locked multifast connectors)
on all quick disconnects in
Division 2 (Figure 1).
Nonhazardous
Location
Equipment
Approved For
Class I, Division2
(All Ports)
The molded construction of
the home-run connector and
the gas/vapor tight continuous
sheath meet the NEC Article
501-15(E)(2) requirements for
cable seals in Division 2.
The same requirements for
mechanical protection and
length limitations apply as in to
nonhazardous locations.
Nonincendive Equipment
Boundary
Cable Seal
Not Required
Figure 1
K9
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
Intrinsic Safety Summary
Intrinsically safe circuits do not
require additional protection for
quick-disconnects.
Class I, Division 1
Hazardous Location
Intrinsically Safe
Apparatus
(All Ports)
Junction boxes must have
FM-approved spacings and entity
parameters for intrinsically safe
circuits.
Boundary seals are not required for
this location, as the molded
home-run connecter and the
gas/vapor tight continuous cable
sheath meet the NEC Article
501-15©) requirements for cable
seals in Class I, Divisions 1 and 2.
Nonhazardous
Location
Boundary Cable Seal
Not Required
Intrinsically Safe
Apparatus
Requirements for mechanical
protection and length limitations are
equivalent to nonhazardous locations.
Explosionproof Equipment
Class I, Division 2
Hazardous Location
Explosionproof
Equipment
Nonhazardous
Location
ITC cable, a recognized Division 2 wiring
method, may be used to connect Explosionproof
equipment installed in Division 2 when used with
an explosionproof feed-through receptacle.
The extremely robust receptacle maintains the
equipment's explosion containment protection
scheme. The external wiring, however, is in
Division 2, and can therefore be installed using
Division 2 wiring methods.
Nonhazardous
Location
Explosionproof feed-thru receptacles may also be
used to feed intrinsically safe circuits into or out
of explosionproof enclosures in Class I, Division 1
hazardous locations.
Explosionproof
feed-thru receptacle
with lokfast guard
Class I, Division 1
Hazardous Location
Intrinsically Safe Circuit
Explosionproof
feed-thru receptacle
Explosionproof
Enclosure
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K10
TURCK
Process Wiring Products
2-Wire Analog or HART Control Circuit Selection Guide
M12 eurofast ® Thread
Drop Cordsets
Receptacles with Cable
Receptacles with Leads
Junction Boxes
Pages
K15 - K19
K20 - K26
K27 - K32
K33 - K42
7/8" minifast ® Thread
Drop
Cordsets
Receptacles
with Cable
Receptacles
with Leads
Explosionproof
Receptacles
"Y" Fitting
Receptacles
Junction Boxes
Pages
K47 - K54
K55 - K61
K63 - K72
K73 - K76
K77 - K78
K79 - K84
M23 multifast ® Thread
Home Run Cordsets
Receptacles with Cable
Receptacles with Leads
Pages
K85 - K92
K93 - K94
K95 - K96
K11
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
eurofast ® Cordset Part Number Key, 2-Wire Analog or HART Control Circuits
Part Number Keys are to assist in IDENTIFICATION ONLY. Consult factory for catalog items not identified.
P - R K G V
4 T - 949 - 2 - RSGV
4T
P = Process Cordset
eurofast
R = Straight
Insertion Point of Extension Cable and 2nd Prefix*
W = Right Angle
* Female Connector Listed 1st, Male Connector 2nd
Gender
Example: P-RKGV 4T-949-2-RSGV 4T
K = Female Connector
S = Male Connector
Length in Meters
Plug Body Style
E = Large Plug Body
Number of Wires / AWG / Color Codes / Cable Type
G = Large, Robust Plug Body
4T-162 = 3x18 AWG, BU, BN, GN/YE, ITC-Exposed Run/Direct Burial/PLTC PVC
R = Armored Plug Body, 22 AWG
4T-330 = 3x18 AWG, BU, BN, GN/YE, ITC-Exposed Run/Direct Burial/PLTC PVC
4T-949 = 3x18 AWG, BU, BN, GN/YE, ITC/PLTC PVC
Coupling Nut Options
4T-950 = 3x18 AWG, BU, BN, GN/YE, ITC/PLTC PVC
(Blank) = Nickel Plated Brass
4.6T-124 = 3x18 AWG, BK, RD, GN/YE, ITC/PLTC PVC
V = 316 Stainless Steel
4.61T-124 = 3x18 AWG, RD, BK, GN/YE, ITC/PLTC PVC
4A-993 = 3x22 AWG, BU, BN, GN/YE, ITC/PLTC Armor PVC
T = T Barb Fitting
A = Armored Cable
Single Ended Example:
P - R K G
4 T - 949 - 2
RKG ..
Extension Example:
P - R K G
4 T - 949 - 2 - R S G
4 T
RKG .. - RSG ..
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K12
TURCK
Process Wiring Products
eurofast ® Cordset Extension
Other Extension Examples:
P - R K G
4 T - 949 - 2 - W S E
4 T
P - W K E
4 T - 949 - 2 - R S G
4 T
P - W K E
4 T - 949 - 2 - W S E
4 T
RKG .. - WSE ..
WKE .. - RSG ..
WKE .. - WSE ..
Note: Hybrid connector extensions also available. Consult factory.
K13
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
eurofast ® Receptacle with Cable Part Number Key, 2-Wire Analog or HART Control Circuits
Part Number Keys are to assist in IDENTIFICATION ONLY. Consult factory for catalog items not identified.
P - F K
V
4- 949 - 0.5 - /14.5/NPT
P = Process Receptacle
Designator for Receptacle
Thread Type
Gender
/14.5/NPT = 1/2-14NPT Threads
K = Female Connector
/14.75/NPT = 3/4-14NPT Threads
/M20 = M20x1 Threads
S = Male Connector
Length in Meters
Housing Style
(Blank) = Front Mount
Number of Wires / AWG / Color Codes / Cable Type
Housing Material
4-330 = 3x18 AWG, BU, BN, GN/YE, ITC-Exposed Run/Direct Burial/PLTC PVC
(Blank) = Nickel Plated Brass
4-950 = 3x18 AWG, BU, BN, GN/YE, ITC/PLTC PVC
V = 316 Stainless Steel
4-949 = 3x18 AWG, BU, BN, GN/YE, ITC/PLTC PVC
4-162 = 3x18 AWG, BU, BN, GN/YE, ITC-Exposed Run/Direct Burial/PLTC PVC
4.6-124 = 3x18 AWG, BK, RD, GN/YE, ITC/PLTC PVC
4.61-124 = 3x18 AWG, RD, BK, GN/YE, ITC/PLTC PVC
eurofast Receptacle with Leads Part Number Key, 2-Wire Analog or HART Control Circuits
Part Number Keys are to assist in IDENTIFICATION ONLY. Consult factory for catalog items not identified.
P - F K
V
4 - 0.5 - /14.5/NPT
P = Process Receptacle
Designator for Receptacle
Thread Type
Gender
/14.5/NPT = 1/2-14NPT Threads
K = Female Connector
/14.75/NPT = 3/4-14NPT Threads
/M20 = M20x1.5 Threads
S = Male Connector
Length in Meters
Housing Style
(Blank) = Front Mount
P = Back Panel Mount
Number of Wires
Housing Material
4=3
(Blank) = Nickel Plated Brass
V = 316 Stainless Steel
4D = 4 Including Drain
4.4 = 4
4.6D = 4 Including Drain
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K14
TURCK
Process Wiring Products
eurofast ® Drop Cordsets, 2-Wire Analog or HART Control Circuits
• Straight Female Connectors
• IEC IP 68 Protection
• 250 V, 4 A
(use as ITC limited to 150 V)
FM tested to the cable
sealing requirements of
NEC Article 501-5(E)(2)
Housing Style
Part Number
Cable
P-RKG 4T-949-*
ITC/PLTC PVC Plum
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF50949-*M†
P-RKG 4T-162-*
ITC-Exposed Run/Direct
Burial/PLTC PVC Plum
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF51162-*M†
P-RKG ..
P-RKG 4.6T-124-*
P-RKG 4.61T-124-*
P-RKG 4T-950-*
P-RKG 4T-330-*
Application
Analog or HART
control circuits in
Class I, Division 2
hazardous
locations** or
unclassified
locations.
ITC/PLTC PVC Plum
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF51124-*M†
ITC/PLTC PVC Blue
3x18 AWG
105°C
7.2 mm OD
Cable #RF50950-*M†
ITC-Exposed Run/Direct
Burial/PLTC PVC Blue
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF51330-*M†
Pinout
1. BU
2. BN
3. Drain
4. GN/YE
1. BK
2. RD
3. Drain
4. GN/YE
1. RD
2. BK
3. Drain
4. GN/YE
Intrinsically Safe
Analog or HART
control circuits in
Class I, Division 1
hazardous
locations.
1. BU
2. BN
3. Drain
4. GN/YE
* Length in meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.
Standard coupling nut material is nickel plated brass "P-RKG.."; "P-RKGV.." indicates 316 stainless steel.
†
See pages K236 - K244 for reelfast ® cable information.
** Use with lokfast eurofast guards (Part Number: LOCK-EURO-G) in Class I, Division 2 applications.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
K15
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
eurofast ® Drop Cordsets, 2-Wire Analog or HART Control Circuits
• Right Angle Female Connectors
• IEC IP 68 Protection
• 250 V, 4 A
(use as ITC limited to 150 V)
FM tested to the cable
sealing requirements of
NEC Article 501-5(E)(2)
Housing Style
Part Number
Cable
P-WKE 4T-949-*
ITC/PLTC PVC Plum
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF50949-*M†
P-WKE 4T-162-*
ITC-Exposed Run/Direct
Burial/PLTC PVC Plum
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF51162-*M†
P-WKE ..
P-WKE 4.6T-124-*
P-WKE 4.61T-124-*
P-WKE 4T-950-*
P-WKE 4T-330-*
Application
Analog or HART
control circuits in
Class I, Division 2
hazardous
locations** or
unclassified
locations.
ITC/PLTC PVC Plum
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF51124-*M†
ITC/PLTC PVC Blue
3x18 AWG
105°C
7.2 mm OD
Cable #RF50950-*M†
ITC-Exposed Run/Direct
Burial/PLTC PVC Blue
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF51330-*M†
Pinout
1. BU
2. BN
3. Drain
4. GN/YE
1. BK
2. RD
3. Drain
4. GN/YE
1. RD
2. BK
3. Drain
4. GN/YE
Intrinsically Safe
Analog or HART
control circuits in
Class I, Division 1
hazardous locations.
1. BU
2. BN
3. Drain
4. GN/YE
* Length in meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.
Standard coupling nut material is nickel plated brass "P-WKE.."; "P-WKEV.." indicates 316 stainless steel.
†
See pages K236 - K244 for reelfast ® cable information.
** Use with lokfast eurofast guards (Part Number: LOCK-EURO) in Class I, Division 2 applications.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K16
TURCK
Process Wiring Products
eurofast ® Drop Cordsets, 2-Wire Analog or HART Control Circuits
• Straight Male Connectors
• IEC IP 68 Protection
• 250 V, 4 A
(use as ITC limited to 150 V)
FM tested to the cable
sealing requirements of
NEC Article 501-5(E)(2)
Housing Style
Part Number
P-RSG ..
Cable
P-RSG 4T-949-*
ITC/PLTC PVC Plum
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF50949-*M†
P-RSG 4T-162-*
ITC-Exposed Run/Direct
Burial/PLTC PVC Plum
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF51162-*M†
P-RSG 4.6T-124-*
P-RSG 4.61T-124-*
P-RSG 4T-950-*
P-RSG 4T-330-*
Application
Analog or HART
control circuits in
Class I, Division 2
hazardous
locations** or
unclassified
locations.
ITC/PLTC PVC Plum
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF51124-*M†
ITC/PLTC PVC Blue
3x18 AWG
105°C
7.2 mm OD
Cable #RF50950-*M†
ITC-Exposed Run/Direct
Burial/PLTC PVC Blue
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF51330-*M†
Pinout
1. BU
2. BN
3. Drain
4. GN/YE
1. BK
2. RD
3. Drain
4. GN/YE
1. RD
2. BK
3. Drain
4. GN/YE
Intrinsically Safe
Analog or HART
control circuits in
Class I, Division 1
hazardous
locations.
1. BU
2. BN
3. Drain
4. GN/YE
* Length in meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.
Standard coupling nut material is nickel plated brass "P-RSG.."; "P-RSGV.." indicates 316 stainless steel.
†
See pages K236 - K244 for reelfast ® cable information.
** Use with lokfast eurofast guards (Part Number: LOCK-EURO-G) in Class I, Division 2 applications.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
K17
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
eurofast ® Drop Cordsets, 2-Wire Analog or HART Control Circuits
• Right Angle Male Connectors
• IEC IP 68 Protection
• 250 V, 4 A
(use as ITC limited to 150 V)
FM tested to the cable
sealing requirements of
NEC Article 501-5(E)(2)
Housing Style
Part Number
P-WSE ..
Cable
P-WSE 4T-949-*
ITC/PLTC PVC Plum
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF50949-*M†
P-WSE 4T-162-*
ITC-Exposed Run/Direct
Burial/PLTC PVC Plum
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF51162-*M†
P-WSE 4.6T-124-*
P-WSE 4.61T-124-*
P-WSE 4T-950-*
P-WSE 4T-330-*
Application
Analog or HART
control circuits in
Class I, Division 2
hazardous
locations** or
unclassified
locations.
ITC/PLTC PVC Plum
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF51124-*M†
ITC/PLTC PVC Blue
3x18 AWG
105°C
7.2 mm OD
Cable #RF50950-*M†
ITC-Exposed Run/Direct
Burial/PLTC PVC Blue
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF51330-*M†
Pinout
1. BU
2. BN
3. Drain
4. GN/YE
1. BK
2. RD
3. Drain
4. GN/YE
1. RD
2. BK
3. Drain
4. GN/YE
Intrinsically Safe
Analog or HART
control circuits in
Class I, Division 1
hazardous locations.
1. BU
2. BN
3. Drain
4. GN/YE
* Length in meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.
Standard coupling nut material is nickel plated brass "P-WSE.."; "P-WSEV.." indicates 316 stainless steel.
†
See pages K236 - K244 for reelfast ® cable information.
** Use with lokfast eurofast guards (Part Number: LOCK-EURO) in Class I, Division 2 applications.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K18
TURCK
Process Wiring Products
eurofast ® Drop Cordsets, 2-Wire Analog or HART Control Circuits
• Straight Connectors
• IEC IP 68 Protection
• 250 V, 4 A
(use as ITC limited to 150 V, 3 A)
FM tested to the cable
sealing requirements of
NEC Article 501-5(E)(2)
Housing Style
Part Number
Cable
Application
Pinout
P-RKR ..
Female
P-RKR 4A-993-*
ITC/PLTC ARMOR PVC Plum
3x22 AWG, 1 STP with GND
Foil/Drain (24)
105°C
11.2 mm OD
Cable #RF50993-*M†
P-RSR ..
Analog or HART
control circuits in
Extreme Conditions
or Class I, Division
2 hazardous
locations** or
unclassified
locations
1. BU
2. BN
3. Drain
4. GN/YE
Male
P-RSR 4A-993-*
* Length in meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.
Standard coupling nut material is nickel plated brass.
†
See pages K236 - K244 for reelfast ® cable information.
** Use with lokfast eurofast guards (Part Number: LOCK-EURO-R) in Class I, Division 2 applications.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
K19
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
eurofast ® Receptacles with Cable, 2-Wire Analog or HART Control Circuits
1
P-FK .. 14.5/NPT
2
Page K21
P-FS .. 14.5/NPT
3
P-FK .. 14.75/NPT
4
Page K23
P-FS .. 14.75/NPT
5
P-FK .. M20
Page K22
Page K24
6
Page K25
P-FS .. M20
Page K26
Note: Recommended panel cutout size and panel thickness.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K20
TURCK
Process Wiring Products
eurofast ® Receptacles with Cable, 2-Wire Analog or HART Control Circuits
• Female Receptacles
• IEC IP 68 Protection
• 250 V, 4 A
(use as ITC limited to 150 V)
Housing Style
Part Number
Cable
P-FK 4-949-*/14.5/NPT
ITC/PLTC PVC Plum
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF50949-*M†
P-FK 4-162-*/14.5/NPT
ITC-Exposed Run/Direct
Burial/PLTC PVC Plum
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF51162-*M†
1
P-FK 4.6-124-*/14.5/NPT
P-FK 4.61-124-*/14.5/NPT
ITC/PLTC PVC Plum
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF51124-*M†
P-FK 4-950-*/14.5/NPT
ITC/PLTC PVC Blue
3x18 AWG
105°C
7.2 mm OD
Cable #RF50950-*M†
P-FK 4-330-*/14.5/NPT
ITC-Exposed Run/Direct
Burial/PLTC PVC Blue
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF51330-*M†
Application
Analog or HART
control circuits in
Class I, Division 2
hazardous
locations or
unclassified
locations.
1/2-14NPT Threads.
Pinout
1. BU
2. BN
3. Drain
4. GN/YE
1. BK
2. RD
3. Drain
4. GN/YE
1. RD
2. BK
3. Drain
4. GN/YE
Intrinsically Safe
Analog or HART
control circuits in
Class I, Division 1
hazardous
locations.
1/2-14NPT Threads.
1. BU
2. BN
3. Drain
4. GN/YE
See page K20 for dimensional drawings.
* Length in meters. Standard cable length is 0.5 meters. Consult factory for other lengths.
Standard housing material is nickel plated brass "P-FK.."; "P-FKV.." indicates 316 stainless steel.
Receptacles recommend 13/16" (21.0 mm) hole for panel mounting.
†
See pages K236 - K244 for reelfast ® cable information.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
K21
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
eurofast ® Receptacles with Cable, 2-Wire Analog or HART Control Circuits
• Male Receptacles
• IEC IP 68 Protection
• 250 V, 4 A
(use as ITC limited to 150 V)
Housing Style
Part Number
Cable
P-FS 4-949-*/14.5/NPT
ITC/PLTC PVC Plum
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF50949-*M†
P-FS 4-162-*/14.5/NPT
ITC-Exposed Run/Direct
Burial/PLTC PVC Plum
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF51162-*M†
2
P-FS 4.6-124-*/14.5/NPT
P-FS 4.61-124-*/14.5/NPT
ITC/PLTC PVC Plum
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF51124-*M†
P-FS 4-950-*/14.5/NPT
ITC/PLTC PVC Blue
3x18 AWG
105°C
7.2 mm OD
Cable #RF50950-*M
P-FS 4-330-*/14.5/NPT
ITC-Exposed Run/Direct
Burial/PLTC PVC Blue
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF51330-*M†
Application
Pinout
1. BU
2. BN
3. Drain
4. GN/YE
Analog or HART
control circuits in
Class I, Division 2
hazardous locations
or unclassified
locations.
1/2-14NPT Threads. 1. BK
2. RD
3. Drain
4. GN/YE
1. RD
2. BK
3. Drain
4. GN/YE
Intrinsically Safe
Analog or HART
control circuits in
Class I, Division 1
hazardous
locations.
1/2-14NPT Threads.
1. BU
2. BN
3. Drain
4. GN/YE
See page K20 for dimensional drawings.
* Length in meters. Standard cable length is 0.5 meters. Consult factory for other lengths.
Standard housing material is nickel plated brass "P-FS.."; "P-FSV.." indicates 316 stainless steel.
Receptacles recommend 13/16" (21.0 mm) hole for panel mounting.
†
See pages K236 - K244 for reelfast ® cable information.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K22
TURCK
Process Wiring Products
eurofast ® Receptacles with Cable, 2-Wire Analog or HART Control Circuits
• Female Receptacles
• IEC IP 68 Protection
• 250 V, 4 A
(use as ITC limited to 150 V)
Housing Style
Part Number
Cable
P-FK 4-949-*/14.75/NPT
ITC/PLTC PVC Plum
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF50949-*M†
P-FK 4-162-*/14.75/NPT
ITC-Exposed Run/Direct
Burial/PLTC PVC Plum
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF51162-*M†
3
P-FK 4.6-124-*/14.75/NPT
P-FK 4.61-124-*/14.75/NPT
ITC/PLTC PVC Plum
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF51124-*M†
P-FK 4-950-*/14.75/NPT
ITC/PLTC PVC Blue
3x18 AWG
105°C
7.2 mm OD
Cable #RF50950-*M†
P-FK 4-330-*/14.75/NPT
ITC-Exposed Run/Direct
Burial/PLTC PVC Blue
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF51330-*M†
Application
Pinout
1. BU
2. BN
3. Drain
4. GN/YE
Analog or HART
control circuits in
Class I, Division 2
hazardous locations
or unclassified
locations.
3/4-14NPT Threads. 1. BK
2. RD
3. Drain
4. GN/YE
1. RD
2. BK
3. Drain
4. GN/YE
Intrinsically Safe
Analog or HART
control circuits in
Class I, Division 1
hazardous
locations.
3/4-14NPT Threads.
1. BU
2. BN
3. Drain
4. GN/YE
See page K20 for dimensional drawings.
* Length in meters. Standard cable length is 0.5 meters. Consult factory for other lengths.
Standard housing material is nickel plated brass "P-FK.."; "P-FKV.." indicates 316 stainless steel.
Receptacles recommend 1-1/16" (27.0 mm) hole for panel mounting.
†
See pages K236 - K244 for reelfast ® cable information.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
K23
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
eurofast ® Receptacles with Cable, 2-Wire Analog or HART Control Circuits
• Male Receptacles
• IEC IP 68 Protection
• 250 V, 4 A
(use as ITC limited to 150 V)
Housing Style
Part Number
Cable
P-FS 4-949-*/14.75/NPT
ITC/PLTC PVC Plum
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF50949-*M†
P-FS 4-162-*/14.75/NPT
ITC-Exposed Run/Direct
Burial/PLTC PVC Plum
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF51162-*M†
4
P-FS 4.6-124-*/14.75/NPT
P-FS 4.61-124-*/14.75/NPT
P-FS 4-950-*/14.75/NPT
P-FS 4-330-*/14.75/NPT
Application
Pinout
1. BU
2. BN
3. Drain
4. GN/YE
Analog or HART
control circuits in
Class I, Division 2
hazardous locations
or unclassified
locations.
3/4-14NPT Threads. 1. BK
2. RD
ITC/PLTC PVC Plum
3. Drain
3x18 AWG, 1 STP with GND
4. GN/YE
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF51124-*M†
1. RD
2. BK
3. Drain
4. GN/YE
ITC/PLTC PVC Blue
3x18 AWG
105°C
7.2 mm OD
Cable #RF50950-*M†
Intrinsically Safe
Analog or HART
control circuits in
ITC-Exposed Run/Direct
Class I, Division 1
Burial/PLTC PVC Blue
hazardous
3x18 AWG, 1 STP with GND
locations.
Foil/Drain (20)
3/4-14NPT Threads.
105°C
7.2 mm OD
Cable #RF51330-*M†
1. BU
2. BN
3. Drain
4. GN/YE
See page K20 for dimensional drawings.
* Length in meters. Standard cable length is 0.5 meters. Consult factory for other lengths.
Standard housing material is nickel plated brass "P-FS.."; "P-FSV.." indicates 316 stainless steel.
Receptacles recommend 1-1/16" (27.0 mm) hole for panel mounting.
†
See pages K236 - K244 for reelfast ® cable information.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K24
TURCK
Process Wiring Products
eurofast ® Receptacles with Cable, 2-Wire Analog or HART Control Circuits
• Female Receptacles
• IEC IP 68 Protection
• 250 V, 4 A
(use as ITC limited to 150 V)
Housing Style
Part Number
Cable
P-FK 4-949-*/M20
ITC/PLTC PVC Plum
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF50949-*M†
P-FK 4-162-*/M20
ITC-Exposed Run/Direct
Burial/PLTC PVC Plum
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF51162-*M†
5
P-FK 4.6-124-*/M20
P-FK 4.61-124-*/M20
ITC/PLTC PVC Plum
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF51124-*M†
P-FK 4-950-*/M20
ITC/PLTC PVC Blue
3x18 AWG
105°C
7.2 mm OD
Cable #RF50950-*M†
P-FK 4-330-*/M20
ITC-Exposed Run/Direct
Burial/PLTC PVC Blue
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF51330-*M†
Application
Analog or HART
control circuits in
Class I, Division 2
hazardous
locations or
unclassified
locations.
M20 Threads.
Pinout
1. BU
2. BN
3. Drain
4. GN/YE
1. BK
2. RD
3. Drain
4. GN/YE
1. RD
2. BK
3. Drain
4. GN/YE
Intrinsically Safe
Analog or HART
control circuits in
Class I, Division 1
hazardous
locations.
M20 Threads.
1. BU
2. BN
3. Drain
4. GN/YE
See page K20 for dimensional drawings.
* Length in meters. Standard cable length is 0.5 meters. Consult factory for other lengths.
Standard housing material is nickel plated brass "P-FK.."; "P-FKV.." indicates 316 stainless steel.
Receptacles recommend 13/16" (21.0 mm) hole for panel mounting.
†
See pages K236 - K244 for reelfast ® cable information.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
K25
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
eurofast ® Receptacles with Cable, 2-Wire Analog or HART Control Circuits
• Male Receptacles
• IEC IP 68 Protection
• 250 V, 4 A
(use as ITC limited to 150 V)
Housing Style
Part Number
Cable
P-FS 4-949-*/M20
ITC/PLTC PVC Plum
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF50949-*M†
P-FS 4-162-*/M20
ITC-Exposed Run/Direct
Burial/PLTC PVC Plum
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF51162-*M†
6
P-FS 4.6-124-*/M20
P-FS 4.61-124-*/M20
ITC/PLTC PVC Plum
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF51124-*M†
P-FS 4-950-*/M20
ITC/PLTC PVC Blue
3x18 AWG
105°C
7.2 mm OD
Cable #RF50950-*M†
P-FS 4-330-*/M20
ITC-Exposed Run/Direct
Burial/PLTC PVC Blue
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF51330-*M†
Application
Analog or HART
control circuits in
Class I, Division 2
hazardous
locations or
unclassified
locations.
M20 Threads.
Pinout
1. BU
2. BN
3. Drain
4. GN/YE
1. BK
2. RD
3. Drain
4. GN/YE
1. RD
2. BK
3. Drain
4. GN/YE
Intrinsically Safe
Analog or HART
control circuits in
Class I, Division 1
hazardous
locations.
M20 Threads.
1. BU
2. BN
3. Drain
4. GN/YE
See page K20 for dimensional drawings.
* Length in meters. Standard cable length is 0.5 meters. Consult factory for other lengths.
Standard coupling nut material is nickel plated brass "P-FS.."; "P-FSV.." indicates 316 stainless steel.
Receptacles recommend 13/16" (21.0 mm) hole for panel mounting.
†
See pages K236 - K244 for reelfast ® cable information.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K26
TURCK
Process Wiring Products
eurofast ® Receptacles with Leads, 2-Wire Analog or HART Control Circuits
1
P-FK ..
2
Page K29
P-FS ..
Page K30
3
P-FKP ..
4
Page K29
P-FK ../14.5/NPT
Page K31
5
P-FS ../14.5/NPT
K27
Page K32
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
eurofast ® Receptacles with Leads, 2-Wire Analog or HART Control Circuits
6
P-FK ../14.75/NPT
7
Page K31
P-FS ../14.75/NPT
8
P-FK ../M20
Page K32
9
Page K31
P-FS ../M20
Page K32
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K28
TURCK
Process Wiring Products
eurofast ® Receptacles with Leads, 2-Wire Analog or HART Control Circuits
• Female Receptacles
• NEMA 1, 3, 4, 6P and IEC IP 68
Protection
Housing Style
Part Number
Lead Specs
Features
Pinout
P-FK 4-*
UL, CSA
3x18 AWG
105°C
250 V, 4 A
PG 9 Threads, Front Panel Mount
1. BU
2. BN
3. N/C
4. GN/YE
P-FK 4D-*
UL, CSA
4x18 AWG
105°C
250 V, 4 A
PG 9 Threads, Front Panel Mount,
Drain Wire
1. BU
2. BN
3. GY
4. GN/YE
P-FKP 4-*
UL, CSA
3x18 AWG
105°C
250 V, 4 A
Back Panel Mount
1. BU
2. BN
3. N/C
4. GN/YE
P-FKP 4D-*
UL, CSA
4x18 AWG
105°C
250 V, 4 A
Back Panel Mount, Drain Wire
1. BU
2. BN
3. GY
4. GN/YE
1
3
See page K27 for dimensional drawings.
* Length in meters. Standard lead length is 0.5 meters. Consult factory for other lengths.
Housing material listed is nickel plated brass "P-FK(P).."; "P-FK(P)V.." indicates 316 stainless steel.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
K29
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
eurofast ® Receptacles with Leads, 2-Wire Analog or HART Control Circuits
• Male Receptacles
• NEMA 1, 3, 4, 6P and IEC IP 68
Protection
Housing Style
Part Number
Lead Specs
Features
Pinout
P-FS 4-*
UL, CSA
3x18 AWG
105°C
250 V, 4 A
PG 9 Threads, Front Panel Mount
1. BU
2. BN
3. N/C
4. GN/YE
P-FS 4D-*
UL, CSA
4x18 AWG
105°C
250 V, 4 A
PG 9 Threads, Front Panel Mount,
Drain Wire
1. BU
2. BN
3. GY
4. GN/YE
2
See page K27 for dimensional drawings.
* Length in meters. Standard lead length is 0.5 meters. Consult factory for other lengths.
Housing material listed is nickel plated brass "P-FS.."; "P-FSV.." indicates 316 stainless steel.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K30
TURCK
Process Wiring Products
eurofast ® Receptacles with Leads, 2-Wire Analog or HART Control Circuits
• Female Receptacles
• NEMA 1, 3, 4, 6P and IEC IP 68
Protection
Housing Style
Part Number
Features
Pinout
P-FK 4-*/14.5/NPT
1/2-14NPT Threads
1. BU
2. BN
3. N/C
4. GN/YE
P-FK 4D-*/14.5/NPT
UL, CSA
4x18 AWG
105°C
250 V, 4 A
1/2-14NPT Threads,
Drain Wire
1. BU
2. BN
3. GY
4. GN/YE
P-FK 4.4-*/14.5/NPT
UL, CSA
4x18 AWG
105°C
250 V, 4 A
1/2-14NPT Threads
1. BU
2. BN
3. WH
4. BK
P-FK 4.6D-*/14.5/NPT
UL, CSA
4x18 AWG
105°C
250 V, 4 A
1/2-14NPT Threads
1. BK
2. RD
3. GY
4. GN/YE
P-FK 4-*/14.75/NPT
UL, CSA
3x18 AWG
105°C
250 V, 4 A
3/4-14NPT Threads
1. BU
2. BN
3. N/C
4. GN/YE
P-FK 4D-*/14.75/NPT
UL, CSA
4x18 AWG
105°C
250 V, 4 A
3/4-14NPT Threads,
Drain Wire
1. BU
2. BN
3. GY
4. GN/YE
P-FK 4-*/M20
UL, CSA
3x18 AWG
105°C
250 V, 4 A
M20 Threads
1. BU
2. BN
3. N/C
4. GN/YE
P-FK 4D-*/M20
UL, CSA
4x18 AWG
105°C
250 V, 4 A
M20 Threads,
Drain Wire
1. BU
2. BN
3. GY
4. GN/YE
4
6
8
Lead Specs
UL, CSA
3x18 AWG
105°C
250 V, 4 A
See pages K27 - K28 for dimensional drawings.
* Length in meters. Standard lead length is 0.5 meters. Consult factory for other lengths.
Housing material listed is nickel plated brass "P-FK.."; "P-FKV.." indicates 316 stainless steel.
Receptacles recommend 13/16" (21.0 mm) hole for panel mounting. 1/2-14NPT and M20, 1-1/16" (27.0 mm) for 3/4-14NPT.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
K31
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
eurofast ® Receptacles with Leads, 2-Wire Analog or HART Control Circuits
• Male Receptacles
• NEMA 1, 3, 4, 6P and IEC IP 68
Protection
Housing Style
Part Number
Features
Pinout
P-FS 4-*/14.5/NPT
1/2-14NPT Threads
1. BU
2. BN
3. N/C
4. GN/YE
P-FS 4D-*/14.5/NPT
UL, CSA
4x18 AWG
105°C
250 V, 4 A
1/2-14NPT Threads,
Drain Wire
1. BU
2. BN
3. GY
4. GN/YE
P-FS 4.4-*/14.5/NPT
UL, CSA
4x18 AWG
105°C
250 V, 4 A
1/2-14NPT Threads
1. BU
2. BN
3. WH
4. BK
P-FS 4.6D-*/14.5/NPT
UL, CSA
4x18 AWG
105°C
250 V, 4 A
1/2-14NPT Threads
1. BK
2. RD
3. GY
4. GN/YE
P-FS 4-*/14.75/NPT
UL, CSA
3x18 AWG
105°C
250 V, 4 A
3/4-14NPT Threads
1. BU
2. BN
3. N/C
4. GN/YE
P-FS 4D-*/14.75/NPT
UL, CSA
4x18 AWG
105°C
250 V, 4 A
3/4-14NPT Threads,
Drain Wire
1. BU
2. BN
3. GY
4. GN/YE
P-FS 4-*/M20
UL, CSA
3x18 AWG
105°C
250 V, 4 A
M20 Threads
1. BU
2. BN
3. N/C
4. GN/YE
P-FS 4D-*/M20
UL, CSA
4x18 AWG
105°C
250 V, 4 A
M20 Threads,
Drain Wire
1. BU
2. BN
3. GY
4. GN/YE
5
7
9
Lead Specs
UL, CSA
3x18 AWG
105°C
250 V, 4 A
See pages K27 - K28 for dimensional drawings.
* Length in meters. Standard lead length is 0.5 meters. Consult factory for other lengths.
Housing material listed is nickel plated brass "P-FS.."; "P-FSV.." indicates 316 stainless steel.
Receptacles recommend 13/16" (21.0 mm) hole for panel mounting. 1/2-14NPT and M20, 1-1/16" (27.0 mm) for 3/4-14NPT.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K32
TURCK
Process Wiring Products
multibox ® eurofast ® Nylon Junction Boxes w/Integral Home Run Cable
• Consolidation of 2-wire Analog or HART Control Circuits in Hazardous Locations or
Unclassified Locations
FM approved for installation in hazardous locations when installed per TURCK Control
Drawing QCF-00147 (www.turck.com/fmcd) using specified accessory equipment.
"/C" versions CSA certified for installation in hazardous locations when installed per TURCK
Control Drawing Ni-2.404(www.turck.com/fmcd) using certified accessory equipment.
4-port, 1 Analog Signal Per Port, Common Ground and Shield
Application
4-port glass-filled nylon junction
box, eurofast port connectors,
integral home-run cable
Specifications
Home-run cable with 4/22
AWG shielded twisted pairs,
each with 22 AWG drain†,
plus overall shield with 22
AWG drain and 18 AWG
overall ground, 10.0 mm OD
Pinout
Wire Color
WH/BK
BK/WH
WH/GN
GN/WH
WH/RD
RD/WH
WH/OG
OG/WH
Drain
GN/YE
Port, Pin
Port 1, Pin 1
Port 1, Pin 2
Port 2, Pin 1
Port 2, Pin 2
Port 3, Pin 1
Port 3, Pin 2
Port 4, Pin 1
Port 4, Pin 2
Ports 1-4, Pin 3
Ports 1-4, Pin 4
Nickel Plated Brass
Stainless Steel
P-4MB12-4-960-*
P-4MBV12-4-960-*
P-4MB12-4-415-*/C
P-4MBV12-4-415-*/C
8-port, 1 Analog Signal Per Port, Common Ground and Shield
Application
8-port glass-filled nylon junction
box, eurofast port connectors,
integral home-run cable
Specifications
Home-run cable with 8/22
AWG shielded twisted pairs,
each with 22 AWG drain†,
plus overall shield with 22
AWG drain and 18 AWG
overall ground, 12.0 mm OD
Pinout
Port, Pin
Port 1, Pin 1
Port 1, Pin 2
Port 2, Pin 1
Port 2, Pin 2
Port 3, Pin 1
Port 3, Pin 2
Port 4, Pin 1
Port 4, Pin 2
Port 5, Pin 1
Port 5, Pin 2
Port 6, Pin 1
Port 6, Pin 2
Port 7, Pin 1
Port 7, Pin 2
Port 8, Pin 1
Port 8, Pin 2
Ports 1-8, Pin 3
Ports 1-8, Pin 4
Wire Color
WH/BK
BK/WH
WH/GN
GN/WH
WH/RD
RD/WH
WH/OG
OG/WH
WH/BU
BU/WH
WH/BN
BN/WH
WH/YE
YE/WH
WH/VT
VT/WH
Drain
GN/YE
Nickel Plated Brass
Stainless Steel
P-8MB12-4-959-*
P-8MBV12-4-959-*
P-8MB12-4-416-*/C
P-8MBV12-4-416-*/C
* Length in meters.
†
Each circuit has dedicated drain wire not connected in the junction box.
Pinouts
Female
4-pin
K33
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
Specifications
Housing:
Connectors
Temperature:
Contacts:
Protection:
Cable:
Glass filled nylon.
Nickel plated brass or 316 stainless steel housings (see table), Nylon contact carriers.
-30° to +80°C (-22° to +176°F).
Gold plated brass.
IP 68.
Standard Version: Plum PVC jacket, UL ITC/PLTC/AWM, CSA CMX-Outdoor/CMG/AWM FT4, 300 V, 105°C.
"/C" Versions:
Plum PUR jacket, UL ITC/PLTC, CSA CIC/CMX-Outdoor-CM, 300 V, 105°C, FT1.
Electrical Rating: Standard Version: 100 V, 4 A per conductor (use as ITC is limited to 3 A for 22 AWG conductors).
Dimensions
4-Port
4-Port
8-Port
8-Port
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K34
TURCK
Process Wiring Products
multibox ® eurofast ® Nylon Junction Boxes w/Integral Home Run Cable
• Consolidation of 2-wire Analog or HART Control Circuits in Hazardous Locations or
Unclassified Locations
• Blue Jacket Color May Be Used as Identification of Intrinsically Safe Circuits
FM approved for installation in hazardous locations when installed per TURCK Control
Drawing QCF-00147 (www.turck.com/fmcd) using specified accessory equipment.
"/C" versions CSA certified for installation in hazardous locations when installed per TURCK
Control Drawing Ni-2.404(www.turck.com/fmcd) using certified accessory equipment.
4-port, 1 Analog Signal Per Port, Common Ground and Shield
Application
4-port glass-filled nylon junction
box, eurofast port connectors,
integral home-run cable
Specifications
Home-run cable with 4/22
AWG shielded twisted pairs,
each with 22 AWG drain†,
plus overall shield with 22
AWG drain and 18 AWG
overall ground, 10.0 mm OD
Pinout
Wire Color
WH/BK
BK/WH
WH/GN
GN/WH
WH/RD
RD/WH
WH/OG
OG/WH
Drain
GN/YE
Port, Pin
Port 1, Pin 1
Port 1, Pin 2
Port 2, Pin 1
Port 2, Pin 2
Port 3, Pin 1
Port 3, Pin 2
Port 4, Pin 1
Port 4, Pin 2
Ports 1-4, Pin 3
Ports 1-4, Pin 4
Nickel Plated Brass
Stainless Steel
P-4MB12-4-978-*
P-4MBV12-4-978-*
P-4MB12-4-978-*/C
P-4MBV12-4-978-*/C
8-port, 1 Analog Signal Per Port, Common Ground and Shield
Application
8-port glass-filled nylon junction
box, eurofast port connectors,
integral home-run cable
Specifications
Home-run cable with 8/22
AWG shielded twisted pairs,
each with 22 AWG drain†,
plus overall shield with 22
AWG drain and 18 AWG
overall ground, 12.0 mm OD
Pinout
Wire Color
WH/BK
BK/WH
WH/GN
GN/WH
WH/RD
RD/WH
WH/OG
OG/WH
WH/BU
BU/WH
WH/BN
BN/WH
WH/YE
YE/WH
WH/VT
VT/WH
Drain
GN/YE
Port, Pin
Port 1, Pin 1
Port 1, Pin 2
Port 2, Pin 1
Port 2, Pin 2
Port 3, Pin 1
Port 3, Pin 2
Port 4, Pin 1
Port 4, Pin 2
Port 5, Pin 1
Port 5, Pin 2
Port 6, Pin 1
Port 6, Pin 2
Port 7, Pin 1
Port 7, Pin 2
Port 8, Pin 1
Port 8, Pin 2
Ports 1-8, Pin 3
Ports 1-8, Pin 4
Nickel Plated Brass
Stainless Steel
P-8MB12-4-977-*
P-8MBV12-4-977-*
P-8MB12-4-977-*/C
P-8MBV12-4-977-*/C
* Length in meters.
†
Each circuit has dedicated drain wire not connected in the junction box.
Pinouts
Female
4-Pin
K35
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
Specifications
Housing:
Connectors
Temperature:
Contacts:
Protection:
Cable:
Electrical Rating:
Glass filled nylon.
Nickel plated brass or 316 stainless steel housings (see table), Nylon contact carriers.
-30° to +80°C (-22° to +176°F).
Gold plated brass.
IP 68.
Blue PVC jacket, UL UTC/PLTC/AWM, CSA CMX-Outdoor/CMG/AWM FT4, 300 V, 105°C.
Standard Version: 100 V, 4 A per conductor (use as ITC is limited to 3 A for 22 AWG conductors).
"/C" Versions:
30 V, 600 mA
Dimensions
4-Port
4-Port
8-Port
8-Port
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K36
TURCK
Process Wiring Products
multibox ® eurofast ® Metal Junction Boxes w/Integral Home Run Cable
• Consolidation of 2-wire Analog or HART Control Circuits in Hazardous Locations** or
Unclassified Locations.
FM approved for installation in hazardous locations when installed per TURCK Control
Drawing QCF-00147 (www.turck.com/fmcd) using specified accessory equipment.
"/C" versions CSA certified for installation in hazardous locations when installed per TURCK
Control Drawing Ni-2.404(www.turck.com/fmcd) using certified accessory equipment.
4-port, 1 Analog Signal Per Port, Common Ground and Shield
Application
4-port cast aluminum
junction box, eurofast
port connectors, integral
home-run cable
Specifications
Home-run cable with 4/22
AWG shielded twisted pairs,
each with 22 AWG drain†,
plus overall shield with 22
AWG drain and 18 AWG
overall ground, 10.0 mm OD
Pinout
Port, Pin
Port 1, Pin 1
Port 1, Pin 2
Port 2, Pin 1
Port 2, Pin 2
Port 3, Pin 1
Port 3, Pin 2
Port 4, Pin 1
Port 4, Pin 2
Ports 1-4, Pin 3
Ports 1-4, Pin 4
Nickel Plated Brass
Wire Color
WH/BK
BK/WH
WH/GN
GN/WH
WH/RD
RD/WH
WH/OG
OG/WH
Drain
GN/YE
Stainless Steel
P-VBM 40-960-*
P-VBMV 40-960-*
P-VBM 40-415-*/C
P-VBMV 40-415-*/C
8-port, 1 Analog Signal Per Port, Common Ground and Shield
Application
8-port cast aluminum
junction box, eurofast
port connectors, integral
home-run cable
Specifications
Home-run cable with 8/22
AWG shielded twisted pairs,
each with 22 AWG drain†,
plus overall shield with 22
AWG drain and 18 AWG
overall ground, 12.0 mm OD
Pinout
Port, Pin
Port 1, Pin 1
Port 1, Pin 2
Port 2, Pin 1
Port 2, Pin 2
Port 3, Pin 1
Port 3, Pin 2
Port 4, Pin 1
Port 4, Pin 2
Port 5, Pin 1
Port 5, Pin 2
Wire Color
WH/BK
BK/WH
WH/GN
GN/WH
WH/RD
RD/WH
WH/OG
OG/WH
WH/BU
BU/WH
Port, Pin
Port 6, Pin 1
Port 6, Pin 2
Port 7, Pin 1
Port 7, Pin 2
Port 8, Pin 1
Port 8, Pin 2
Ports 1-8, Pin 3
Ports 1-8, Pin 4
Nickel Plated Brass
Wire Color
WH/BN
BN/WH
WH/YE
YE/WH
WH/VT
VT/WH
Drain
GN/YE
Stainless Steel
P-VBM 80-959-*
P-VBMV 80-959-*
P-VBM 80-416-*/C
P-VBMV 80-416-*/C
* Length in meters.
** Use with lokfast LOCK-EURO-G or LOCK-EURO-FW for port connectors in Class I, Division 2 applications.
†
Each circuit has an additional dedicated drain wire not connected in the junction box.
4-Port
K37
8-Port
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
Specifications
Housing:
Connectors
Temperature:
Contacts:
Protection:
Cable:
Die-cast aluminum alloy.
Nickel plated brass or 316 stainless steel housings (see table), oil resistant PUR contact carrier.
-30° to +80°C (-22° to +176°F).
Gold plated brass.
IP 68.
Standard Version: Plum PVC jacket, UL ITC/PLTC/AWM, CSA CMX-Outdoor/CMG/AWM FT4, 300 V, 105°C.
"/C" Versions:
Plum PUR jacket, UL ITC/PLTC, CSA CIC/CMX-Outdoor-CM, 300 V, 105°C, FT1.
Electrical Rating: Standard Version: 250 V, 4 A per conductor (use as ITC is limited to 150 V, 3 A for 22 AWG conductors).
"/C" Versions:
30 V, 600 mA
Dimensions
4-Port
8-Port
Notes:
1. Clearance hole for 1/4-20 mounting screws (2 not included).
Pinouts
Female
4-Pin
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K38
TURCK
Process Wiring Products
multibox ® eurofast ® Nylon Junction Boxes
• Consolidation of 2-wire Analog or HART Control Circuits in Hazardous Locations or
Unclassified Locations.
FM approved for installation in hazardous locations when installed per TURCK Control
Drawing QCF-00147 (www.turck.com/fmcd) using specified accessory equipment.
"/C" versions CSA certified for installation in hazardous locations when installed per TURCK
Control Drawing Ni-2.404(www.turck.com/fmcd) using certified accessory equipment.
4-port, 1 Analog Signal Per Port, Common Ground and Shield
Application
4-port glass-filled nylon
junction box, eurofast
port connectors,
multifast ® home-run
connector
Specifications
Pinout
12-pin multifast connector
Home-Run
1
2
3
4
5
6
Port, Pin
Port 1, Pin 1
Port 1, Pin 2
Port 2, Pin 1
Port 2, Pin 2
Port 3, Pin 1
Port 3, Pin 2
Port, Pin
Port 4, Pin 1
Port 4, Pin 2
NC
NC
Ports 1-4, Pin 3
Ports 1-4, Pin 4
Nickel Plated Brass
Home-Run
7
8
9
10
11
12
Stainless Steel
P-4MB12-4-CS12
P-4MBV12-4-CSV12
P-4MB12-4-CS12/C
P-4MBV12-4-CSV12/C
See pages K85 - K92 for mating home-run cordsets.
8-port, 1 Analog Signal Per Port, Common Ground and Shield
Application
8-port glass-filled
nylon junction box,
eurofast port
connectors, multifast
home-run connector
Specifications
Pinout
19-pin multifast connector
Port, Pin
Port 1, Pin 1
Port 1, Pin 2
Port 2, Pin 1
Port 2, Pin 2
Port 3, Pin 1
Ports 1-8, Pin 3
Port 3, Pin 2
Port 4, Pin 1
Port 4, Pin 2
Home-Run
1
2
3
4
5
6
7
8
9
Port, Pin
Port 5, Pin 1
Port 5, Pin 2
Ports 1-8, Pin 4
Port 6, Pin 1
Port 6, Pin 2
Port 7, Pin 1
Port 7, Pin 2
Port 8, Pin 1
Port 8, Pin 2
NC
Nickel Plated Brass
Home-Run
10
11
12
13
14
15
16
17
18
19
Stainless Steel
P-8MB12-4-CS19
P-8MBV12-4-CSV19
P-8MB12-4-CS19/C
P-8MBV12-4-CSV19/C
See pages K85 - K92 for mating home-run cordsets.
Wiring Diagrams
4-Port
K39
8-Port
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
Specifications
Housing:
Connectors
Glass filled nylon.
Nickel plated brass or 316 stainless steel housings (see table).
Nylon contact carriers.
Temperature:
-30° to +80°C (-22° to +176°F).
Contacts:
Gold plated brass.
Protection:
IP 67.
Electrical Rating: Standard Version: 100 V, 4 A per conductor.
"/C" Versions:
30 V, 600 mA
Dimensions
4-Port
8-Port
Pinouts
Female
4-Pin eurofast ®
Male
12-Pin multifast ®
19-Pin multifast ®
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K40
TURCK
Process Wiring Products
multibox ® eurofast ® Metal Junction Boxes
• Consolidation of 2-wire Analog or HART Control Circuits in Hazardous Locations or
Unclassified Locations
FM approved for installation in hazardous locations when installed per TURCK Control
Drawing QCF-00147 (www.turck.com/fmcd) using specified accessory equipment.
"/C" versions CSA certified for installation in hazardous locations when installed per TURCK
Control Drawing Ni-2.404(www.turck.com/fmcd) using certified accessory equipment.
4-port, Common Ground and Shield
Application
4-port cast aluminum
junction box, eurofast
port connectors,
multifast ® home-run
connector, 1 analog
signal per port
Specifications
12-pin multifast connector
Pinout
Home-Run
1
2
3
4
5
6
Pin, Port
Port 1, Pin 1
Port 1, Pin 2
Port 2, Pin 1
Port 2, Pin 2
Port 3, Pin 1
Port 3, Pin 2
Port, Pin
Port 4, Pin 1
Port 4, Pin 2
NC
NC
Ports 1-4, Pin 3
Ports 1-4, Pin 4
Nickel Plated Brass
Home-Run
7
8
9
10
11
12
Stainless Steel
P-VBM 40-CS12
P-VBMV 40-CSV12
P-VBM 40-CS12/C
P-VBMV 40-CSV12/C
See pages K85 - K92 for mating home-run cordsets.
8-port, Common Ground and Shield
Application
8-port cast aluminum
junction box, eurofast
port connectors,
multifast home-run
connector, 1 analog
signal per port
Specifications
19-pin multifast connector
Pinout
Port, Pin
Port 1, Pin 1
Port 1, Pin 2
Port 2, Pin 1
Port 2, Pin 2
Port 3, Pin 1
Ports 1-8, Pin 3
Port 3, Pin 2
Port 4, Pin 1
Port 4, Pin 2
Home-Run
1
2
3
4
5
6
7
8
9
Port, Pin
Port 5, Pin 1
Port 5, Pin 2
Ports 1-8, Pin 4
Port 6, Pin 1
Port 6, Pin 2
Port 7, Pin 1
Port 7, Pin 2
Port 8, Pin 1
Port 8, Pin 2
NC
Nickel Plated Brass
Home-Run
10
11
12
13
14
15
16
17
18
19
Stainless Steel
P-VBM 80-CS19
P-VBMV 80-CSV19
P-VBM 80-CS19/C
P-VBMV 80-CSV19/C
See pages K85 - K92 for mating home-run cordsets.
Wiring Diagrams
4-Port Diagram, 1 Analog Signal Per Port
K41
8-Port Diagram, 1 Analog Signal Per Port
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
Specifications
Housing:
Connectors
Temperature:
Contacts:
Protection:
Electrical Rating:
Die-cast aluminum alloy.
Nickel plated brass or 316 stainless steel housings (see table), oil resistant PUR contact carrier.
-30° to +80°C (-22° to +176°F).
Gold plated brass.
IP 67.
Standard Version: 12-pin: 250 V, 4 A per conductor.
Standard Version: 12-pin: 250 V, 4 A per conductor.
"/C" Versions:
30 V, 600 mA
Dimensions
8-Port
4-Port
Notes:
1. Clearance hole for 1/4-20 mounting screws (2 not included).
Pinouts
Female
4-Pin eurofast ®
Male
12-Pin multifast ®
19-Pin multifast
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K42
TURCK
Process Wiring Products
minifast ® Cordset Part Number Key, 2-Wire Analog or HART Control Circuits
Part Number Keys are to assist in IDENTIFICATION ONLY. Consult factory for catalog items not identified.
P - R S V
R K V
40 - 949 - 2M
P = Process Cordset
minifast
R = Straight
Length in Meters
W = Right Angle
Gender
Number of Wires / AWG / Color Codes / Cable Type
K = Female Connector and Threads
30-026 = 2x18 AWG, BU, BN, ITC/PLTC PVC
S = Male Connector and Threads
40-330 = 3x18 AWG, BU, BN, GN/YE, ITC-Exposed Run/Direct
Burial/PLTC PVC
Y = Male Connector, Female Threads
40-949 = 3x18 AWG, BU, BN, GN/YE, ITC/PLTC PVC
Coupling Nut Options
40-950 = 3x18 AWG, BU, BN, GN/YE, ITC/PLTC PVC
M = Nickel Plated Brass
40-162 = 3x18 AWG, BU, BN, GN/YE, ITC-Exposed Run/Direct
Burial/PLTC PVC
V = 316 Stainless Steel
45-098 = 3x16 AWG, WH, BK, GN, ITC/PLTC PVC
45-327 = 3x16 AWG, WH, BK, GN, ITC/PLTC PVC
Insertion Point of Extension Cable and 2nd Prefix*
46-124 = 3x18 AWG, BK, RD, GN/YE, ITC/PLTC PVC
* Male Connector Listed 1st, Female Connector 2nd
461-124 = 3x18 AWG, RD, BK, GN/YE, ITC/PLTC PVC
Example: P-RSV RKV 40-949-2M
Single Ended Example:
40A-947 = 3x18 AWG, BU, BN, GN/YE, ITC/PLTC Armor
P - R S V
40- 949 - 2M
RSV ..
Extension Example:
P - R S V
R K V
40- 949 - 2M
RSV .. - RKV ..
K43
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
minifast ® Cordset Extensions
Other Extension Examples:
P - R S V
W K V
40- 949
- 2M
P - W S V
R K V
40- 949
- 2M
P - W S V
W K V
40- 949
- 2M
RSV .. - WKV ..
WSV .. - RKV ..
WSV .. - WKV ..
Note: Hybrid connector extensions also available. Consult factory.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K44
TURCK
Process Wiring Products
minifast ® Receptacle with Cable Part Number Key, 2-Wire Analog or HART Control Circuits
Part Number Keys are to assist in IDENTIFICATION ONLY. Consult factory for catalog items not identified.
P - R K F
V
40 - 949 - 2 - /14.5/NPT
P = Process Receptacle
Designator for Receptacle
Thread Type
Gender
/14.5/NPT = 1/2-14NPT Threads
K = Female Connector
/14.75/NPT = 3/4-14NPT Threads
S = Male Connector
/M20 = M20x1.5 Threads
X = Female Connector, Male Threads
Length in Meters
Housing Style
(Blank) = Front Mount
P = Back Panel Mount
Number of Wires / AWG / Color Codes / Cable Type
30-026 = 2x18 AWG, BU, BN, ITC/PLTC PVC
Housing Material
40-949 = 3x18 AWG, BU, BN, GN/YE, ITC/PLTC PVC
(Blank) = Nickel Plated Brass
40-162 = 3x18 AWG, BU, BN, GN/YE, ITC-Exposed Run/Direct Burial/PLTC PVC
V = 316 Stainless Steel
45-098 = 3x16 AWG, WH, BK, GN, ITC/PLTC PVC
46-124 = 3x18 AWG, BK, RD, GN/YE, ITC/PLTC PVC
461-124 = 3x18 AWG, RD, BK, GN/YE, ITC/PLTC PVC
40-330 = 3x18 AWG, BU, BN, GN/YE, ITC-Exposed Run/Direct Burial/ PLTC PVC
40-950 = 3x18 AWG, BU, BN, GN/YE, ITC/PLTC PVC
K45
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
minifast ® Receptacle with Leads Part Number Key, 2-Wire Analog or HART Control Circuits
Part Number Keys are to assist in IDENTIFICATION ONLY. Consult factory for catalog items not identified.
P - R K F
V
40 - 0.5 - /14.5/NPT
P = Process Receptacle
Designator for Receptacle
Thread Type
Gender
(Blank) = 1/2-14NPSM
K = Female Connector
/14.5/NPT = 1/2-14NPT Threads
S = Male Connector
/14.75/NPT = 3/4-14NPT Threads
X = Female Connector, Male Threads
/M20 = M20x1.5 Threads
Housing Style
Length in Meters
(Blank) = Front Mount
P = Back Panel Mount
Number of Wires
Housing Material
(Blank) = Nickel Plated Brass
V = 316 Stainless Steel
30 = 2
30D = 3 including drain
321 = 3
40 = 3
40D = 4 including drain
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K46
TURCK
Process Wiring Products
minifast ® Drop Cordsets, 2-Wire Analog or HART Control Circuits
• Straight Female Connectors
• IEC IP 67 Protection
• 300 V, 9 A
(use as ITC limited to 150 V, 5 A)
FM tested to the cable
sealing requirements of
NEC Article 501-5(E)(2)
Housing Style
Part Number
Cable
P-RKM 30-026-*M
ITC/PLTC PVC Plum
2x18 AWG, 1 STP
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF51026-*M†
P-RKM 40-949-*M
ITC/PLTC PVC Plum
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF50949-*M†
P-RKM 40-162-*M
ITC-Exposed Run/Direct
Burial/PLTC PVC Plum
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF51162-*M†
P-RKM 45-098-*M
ITC/PLTC PVC Plum
3x16 AWG, 1 STP with GND
Foil/Drain (18)
105°C
7.6 mm OD
Cable #RF51098-*M†
P-RKM ..
Application
Pinout
1. BU
2. BN
3. Drain
Analog or HART control
circuits in Class I,
Division 2 hazardous
locations** or
unclassified locations.
1. BU
2. BN
3. Drain
4. GN/YE
1. WH
2. BK
3. Drain
4. GN
* Length in meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.
Standard coupling nut material is nickel plated brass "P-RKM.."; "P-RKV.." indicates 316 stainless steel.
†
See pages K236 - K244 for reelfast ® cable information.
** Use with lokfast minifast guards (Part Number: LOCK-MINI) in Class I, Division 2 applications.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
K47
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
minifast ® Drop Cordsets, 2-Wire Analog or HART Control Circuits
• Straight Female Connectors
• IEC IP 67 Protection
• 300 V, 9 A
(use as ITC limited to 150 V, 5 A)
FM tested to the cable
sealing requirements of
NEC Article 501-5(E)(2)
Housing Style
Part Number
P-RKM 40-950-*M
Cable
ITC/PLTC PVC Blue
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF50950-*M†
P-RKM 40-330-*M
ITC-Exposed Run/Direct
Burial/PLTC PVC Blue
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF51330-*M†
P-RKM 45-327-*M
ITC/PLTC PVC Blue
3x16 AWG, 1 STP with GND
Foil/Drain (18)
105°C
7.6 mm OD
Cable #RF51327-*M†
P-RKM..
P-RKM 46-124-*M
P-RKM 461-124-*M
P-RKM..
P-RKM 40A-947-*M
ITC/PLTC PVC Plum
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF51124-*M†
Application
Intrinsically Safe
Analog or HART
control circuits in
Class I, Division 1
hazardous
locations.
Pinout
1. BU
2. BN
3. Drain
4. GN/YE
1. WH
2. BK
3. Drain
4. GN
Analog or HART
control circuits in
Class I, Division 2
hazardous
locations** or
unclassified
locations.
ITC/PLTC Armor Plum
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
13.5 mm OD
Cable #RF50947-*M†
1. BK
2. RD
3. Drain
4. GN/YE
1. RD
2. BK
3. Drain
4. GN/YE
1. BU
2. BN
3. Drain
4. GN/YE
* Length in meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.
Standard coupling nut material is nickel plated brass "P-RKM.."; "P-RKV.." indicates 316 stainless steel.
†
See pages K236 - K244 for reelfast ® cable information.
** Use with lokfast minifast guards (Part Number: LOCK-MINI) in Class I, Division 2 applications.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K48
TURCK
Process Wiring Products
minifast ® Drop Cordsets, 2-Wire Analog or HART Control Circuits
• Right Angle Female Connectors
• IEC IP 67 Protection
• 300 V, 9 A
(use as ITC limited to 150 V, 5 A)
FM tested to the cable
sealing requirements of
NEC Article 501-5(E)(2)
Housing Style
Part Number
Cable
P-WKM 30-026-*M
ITC/PLTC PVC Plum
2x18 AWG, 1 STP
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF51026-*M†
P-WKM 40-949-*M
ITC/PLTC PVC Plum
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF50949-*M†
P-WKM 40-162-*M
ITC-Exposed Run/Direct
Burial/PLTC PVC Plum
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF51162-*M†
P-WKM 45-098-*M
ITC/PLTC PVC Plum
3x16 AWG, 1 STP with GND
Foil/Drain (18)
105°C
7.6 mm OD
Cable #RF51098-*M†
P-WKM ..
Application
Pinout
1. BU
2. BN
3. Drain
Analog or HART
control circuits in
Class I, Division 2
hazardous locations**
or unclassified
locations.
1. BU
2. BN
3. Drain
4. GN/YE
1. WH
2. BK
3. Drain
4. GN
* Length in meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.
Standard coupling nut material is nickel plated brass "P-WKM.."; "P-WKV.." indicates 316 stainless steel.
†
See pages K236 - K244 for reelfast ® cable information.
** Use with lokfast minifast guards (Part Number: LOCK-MINI-ANGLE) in Class I, Division 2 applications.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
K49
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
minifast ® Drop Cordsets, 2-Wire Analog or HART Control Circuits
• Right Angle Female Connectors
• IEC IP 67 Protection
• 300 V, 9 A
(use as ITC limited to 150 V, 5 A)
FM tested to the cable
sealing requirements of
NEC Article 501-5(E)(2)
Housing Style
Part Number
P-WKM 40-950-*M
Cable
ITC/PLTC PVC Blue
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF50950-*M†
P-WKM 40-330-*M
ITC-Exposed Run/Direct
Burial/PLTC PVC Plum
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF51162-*M†
P-WKM 45-327-*M
ITC/PLTC PVC Blue
3x16 AWG, 1 STP with GND
Foil/Drain (18)
105°C
7.6 mm OD
Cable #RF51327-*M†
P-WKM..
P-WKM 46-124-*M
P-WKM 461-124-*M
ITC/PLTC PVC Plum
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF51124-*M†
Application
Intrinsically Safe
Analog or HART
control circuits in
Class I, Division 1
hazardous locations.
Analog or HART
control circuits in
Class I, Division 2
hazardous
locations** or
unclassified locations.
Pinout
1. BU
2. BN
3. Drain
4. GN/YE
1. WH
2. BK
3. Drain
4. GN
1. BK
2. RD
3. Drain
4. GN/YE
1. RD
2. BK
3. Drain
4. GN/YE
* Length in meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.
Standard coupling nut material is nickel plated brass "P-WKM.."; "P-WKV.." indicates 316 stainless steel.
†
See pages K236 - K244 for reelfast ® cable information.
** Use with lokfast minifast guards (Part Number: LOCK-MINI-ANGLE) in Class I, Division 2 applications.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K50
TURCK
Process Wiring Products
minifast ® Drop Cordsets, 2-Wire Analog or HART Control Circuits
• Straight Male Connectors
• IEC IP 67 Protection
• 300 V, 9 A
(use as ITC limited to 150 V, 5 A)
FM tested to the cable
sealing requirements of
NEC Article 501-5(E)(2)
Housing Style
Part Number
Cable
P-RSM 30-026-*M
ITC/PLTC PVC Plum
2x18 AWG, 1 STP
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF51026-*M†
P-RSM 40-949-*M
ITC/PLTC PVC Plum
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF50949-*M†
P-RSM 40-162-*M
ITC-Exposed Run/Direct
Burial/PLTC PVC Plum
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF51162-*M†
P-RSM 45-098-*M
ITC/PLTC PVC Plum
3x16 AWG, 1 STP with GND
Foil/Drain (18)
105°C
7.6 mm OD
Cable #RF51098-*M†
P-RSM ..
Application
Pinout
1. BU
2. BN
3. Drain
Analog or HART
control circuits in
Class I, Division 2
hazardous locations**
or unclassified
locations.
1. BU
2. BN
3. Drain
4. GN/YE
1. WH
2. BK
3. Drain
4. GN
* Length in meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.
Standard coupling nut material is nickel plated brass "P-RSM.."; "P-RSV.." indicates 316 stainless steel.
†
See pages K236 - K244 for reelfast ® cable information.
** Use with lokfast minifast guards (Part Number: LOCK-MINI) in Class I, Division 2 applications.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
K51
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
minifast ® Drop Cordsets, 2-Wire Analog or HART Control Circuits
• Straight Male Connectors
• IEC IP 67 Protection
• 300 V, 9 A
(use as ITC limited to 150 V, 5 A)
FM tested to the cable
sealing requirements of
NEC Article 501-5(E)(2)
Housing Style
Part Number
P-RSM 40-330-*M
Cable
ITC-Exposed Run/Direct
Burial/PLTC PVC Plum
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF51162-*M†
P-RSM 40-950-*M
ITC/PLTC PVC Blue
3x18 AWG 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF50950-*M†
P-RSM 45-327-*M
ITC/PLTC PVC Blue
3x16 AWG, 1 STP with GND
Foil/Drain (18)
105°C
7.6 mm OD
Cable #RF51327-*M†
P-RSM..
P-RSM 46-124-*M
P-RSM 461-124-*M
P-RSM..
P-RSM 40A-947-*M
ITC/PLTC PVC Plum
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF51124-*M†
ITC/PLTC Armor Plum
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
13.5 mm OD
Cable #RF50947-*M†
Application
Intrinsically Safe
Analog or HART
control circuits in
Class I, Division 1
hazardous
locations.
Analog or HART
control circuits in
Class I, Division 2
hazardous
locations** or
unclassified
locations.
Pinout
1. BU
2. BN
3. Drain
4. GN/YE
1. WH
2. BK
3. Drain
4. GN
1. BK
2. RD
3. Drain
4. GN/YE
1. RD
2. BK
3. Drain
4. GN/YE
Analog or HART
control circuits in
Class I, Division 2
hazardous
locations** or
unclassified
locations.
1. BU
2. BN
3. Drain
4. GN/YE
* Length in meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.
Standard coupling nut material is nickel plated brass "P-RSM.."; "P-RSV.." indicates 316 stainless steel.
†
See pages K236 - K244 for reelfast ® cable information.
** Use with lokfast minifast guards (Part Number: LOCK-MINI) in Class I, Division 2 applications.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K52
TURCK
Process Wiring Products
minifast ® Drop Cordsets, 2-Wire Analog or HART Control Circuits
• Right Angle Male Connectors
• IEC IP 67 Protection
• 300 V, 9 A
(use as ITC limited to 150 V, 5 A)
FM tested to the cable
sealing requirements of
NEC Article 501-5(E)(2)
Housing Style
Part Number
Cable
P-WSM 30-026-*M
ITC/PLTC PVC Plum
2x18 AWG, 1 STP
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF51026-*M†
P-WSM 40-949-*M
ITC/PLTC PVC Plum
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF50949-*M†
P-WSM 40-162-*M
ITC-Exposed Run/Direct
Burial/PLTC PVC Plum
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF51162-*M†
P-WSM 45-098-*M
ITC/PLTC PVC Plum
3x16 AWG, 1 STP with GND
Foil/Drain (18)
105°C
7.6 mm OD
Cable #RF51098-*M†
P-WSM ..
Application
Pinout
1. BN
2. BU
3. Drain
Analog or HART
control circuits in
Class I, Division 2
hazardous locations**
or unclassified
locations.
1. BU
2. BN
3. Drain
4. GN/YE
1. WH
2. BK
3. Drain
4. GN
* Length in meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.
Standard coupling nut material is nickel plated brass "P-WSM.."; "P-WSV.." indicates 316 stainless steel.
†
See pages K236 - K244 for reelfast ® cable information.
** Use with lokfast minifast guards (Part Number: LOCK-MINI-ANGLE) in Class I, Division 2 applications.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
K53
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
minifast ® Drop Cordsets, 2-Wire Analog or HART Control Circuits
• Right Angle Male Connectors
• IEC IP 67 Protection
• 300 V, 9 A
(use as ITC limited to 150 V, 5 A)
FM tested to the cable
sealing requirements of
NEC Article 501-5(E)(2)
Housing Style
Part Number
P-WSM 40-330-*M
Cable
ITC-Exposed Run/Direct
Burial/PLTC PVC Plum
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF51162-*M†
P-WSM 40-950-*M
ITC/PLTC PVC Blue
3x18 AWG 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF50950-*M†
P-WSM 45-327-*M
ITC/PLTC PVC Blue
3x16 AWG, 1 STP with GND
Foil/Drain (18)
105°C
7.6 mm OD
Cable #RF51327-*M†
P-WSM..
P-WSM 46-124-*M
P-WSM 461-124-*M
ITC/PLTC PVC Plum
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF51124-*M†
Application
Intrinsically Safe
Analog or HART
control circuits in
Class I, Division 1
hazardous locations.
Analog or HART
control circuits in
Class I, Division 2
hazardous locations**
or unclassified
locations.
Pinout
1. BU
2. BN
3. Drain
4. GN/YE
1. WH
2. BK
3. Drain
4. GN
1. BK
2. RD
3. Drain
4. GN/YE
1. RD
2. BK
3. Drain
4. GN/YE
* Length in meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.
Standard coupling nut material is nickel plated brass "P-WSM.."; "P-WSV.." indicates 316 stainless steel.
†
See pages K236 - K244 for reelfast ® cable information.
** Use with lokfast minifast guards (Part Number: LOCK-MINI-ANGLE) in Class I, Division 2 applications.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K54
TURCK
Process Wiring Products
minifast ® Receptacles with Cable, 2-Wire Analog or HART Control Circuits
1
P-RKF .. 14.5/NPT
2
Page K56
P-RSF .. 14.5/NPT
Page K57
3
P-RKF .. 14.75/NPT
4
Page K58
P-RSF .. 14.75/NPT
5
P-RKF .. M20
K55
Page K59
6
Page K60
P-RSF .. M20
Page K61
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
minifast ® Receptacles with Cable, 2-Wire Analog or HART Control Circuits
• Female Receptacles
• IEC IP 67 Protection
• 300 V, 9 A
(use as ITC limited to 150 V, 5 A)
Housing Style
Part Number
Cable
P-RKF 30-026-*/14.5/NPT
ITC/PLTC PVC Plum
2x18 AWG, 1 STP
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF51026-*M†
P-RKF 40-949-*/14.5/NPT
ITC/PLTC PVC Plum
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF50949-*M†
P-RKF 40-162-*/14.5/NPT
ITC-Exposed Run/Direct
Burial/PLTC PVC Plum
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF51162-*M†
P-RKF 45-098-*/14.5/NPT
ITC/PLTC PVC Plum
3x16 AWG, 1 STP with GND
Foil/Drain (18)
105°C
7.6 mm OD
Cable #RF51098-*M†
1
Application
1. BU
2. BN
3. Drain
Analog or HART
control circuits
in Class I,
Division 2
hazardous
locations or
unclassified
locations.
1/2-14NPT
Conduit Entry
Thread.
P-RKF 40-950-*/14.5/NPT
P-RKF 40-330-*/14.5/NPT
ITC/PLTC PVC Blue
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF50950-*M†
1. BU
2. BN
3. Drain
4. GN/YE
1. WH
2. BK
3. Drain
4. GN
1. BK
2. RD
3. Drain
4. GN/YE
ITC/PLTC PVC Plum
P-RKF 46-124-*/14.5/NPT
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
P-RKF 461-124-*/14.5/NPT Cable #RF51124-*M†
ITC-Exposed Run/Direct
Burial/PLTC PVC Blue
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF51330-*M†
Pinout
1. RD
2. BK
3. Drain
4. GN/YE
Intrinsically Safe
Analog or HART
control circuits
in Class I,
Division 1
hazardous
locations.
1/2-14NPT
Conduit Entry
Thread.
1. BU
2. BN
3. Drain
4. GN/YE
See page K55 for dimensional drawings.
* Length in meters. Standard lead length is 0.5 meters. Consult factory for other lengths.
Standard coupling nut material is nickel plated brass "P-RKF.."; "P-RKFV.." indicates 316 stainless steel.
Receptacles recommend 13/16" (21.0 mm) hole for panel mounting.
†
See pages K236 - K244 for reelfast ® cable information.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K56
TURCK
Process Wiring Products
minifast ® Receptacles with Cable, 2-Wire Analog or HART Control Circuits
• Male Receptacles
• IEC IP 67 Protection
• 300 V, 9 A
(use as ITC limited to 150 V, 5 A)
Housing Style
Part Number
Cable
P-RSF 30-026-*/14.5/NPT
ITC/PLTC PVC Plum
2x18 AWG, 1 STP
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF51026-*M†
P-RSF 40-949-*/14.5/NPT
ITC/PLTC PVC Plum
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF50949-*M†
P-RSF 40-162-*/14.5/NPT
ITC-Exposed Run/Direct
Burial/PLTC PVC Plum
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF51162-*M†
P-RSF 45-098-*/14.5/NPT
ITC/PLTC PVC Plum
3x16 AWG, 1 STP with GND
Foil/Drain (18)
105°C
7.6 mm OD
Cable #RF51098-*M†
2
P-RSF 46-124-*/14.5/NPT
P-RSF 461-124-*/14.5/NPT
P-RSF 40-330-*/14.5/NPT
P-RSF 40-950-*/14.5/NPT
Application
1. BU
2. BN
3. Drain
Analog or HART
control circuits
in Class I,
Division 2
hazardous
locations** or
unclassified
locations.
1/2-14NPT
Conduit Entry
Thread.
ITC/PLTC PVC Blue
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF50950-*M†
1. BU
2. BN
3. Drain
4. GN/YE
1. WH
2. BK
3. Drain
4. GN
1. BK
2. RD
3. Drain
4. GN/YE
ITC/PLTC PVC Plum
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF51124-*M†
ITC-Exposed Run/Direct
Burial/PLTC PVC Blue
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF51330-*M†
Pinout
1. RD
2. BK
3. Drain
4. GN/YE
Intrinsically Safe
Analog or HART
control circuits
in Class I,
Division 1
hazardous
locations.
1/2-14NPT
Conduit Entry
Thread.
1. BU
2. BN
3. Drain
4. GN/YE
See page K55 for dimensional drawings.
* Length in meters. Standard cable length is 0.5 meters. Consult factory for other lengths.
Standard coupling nut material is nickel plated brass "P-RSF.."; "P-RSFV.." indicates 316 stainless steel.
Receptacles recommend 13/16" (21.0 mm) hole for panel mounting.
†
See pages K236 - K244 for reelfast ® cable information.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
K57
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
minifast ® Receptacles with Cable, 2-Wire Analog or HART Control Circuits
• Female Receptacles
• IEC IP 67 Protection
• 300 V, 9 A
(use as ITC limited to 150 V, 5 A)
Housing Style
Part Number
Cable
P-RKF 30-026-*/14.75/NPT
ITC/PLTC PVC Plum
2x18 AWG, 1 STP
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF51026-*M†
P-RKF 40-949-*/14.75/NPT
ITC/PLTC PVC Plum
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF50949-*M†
P-RKF 40-162-*/14.75/NPT
ITC-Exposed Run/Direct
Burial/PLTC PVC Plum
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF51162-*M†
P-RKF 45-098-*/14.75/NPT
ITC/PLTC PVC Plum
3x16 AWG, 1 STP with GND
Foil/Drain (18)
105°C
7.6 mm OD
Cable #RF51098-*M†
3
P-RKF 46-124-*/14.75/NPT
P-RKF 461-124-*/14.75/NPT
P-RKF 40-330-*/14.75/NPT
P-RKF 40-950-*/14.75/NPT
Application
1. BU
2. BN
3. Drain
Analog or HART
control circuits
in Class I,
Division 2
hazardous
locations or
unclassified
locations.
3/4-14NPT
Conduit Entry
Thread.
ITC/PLTC PVC Blue
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF50950-*M†
1. BU
2. BN
3. Drain
4. GN/YE
1. WH
2. BK
3. Drain
4. GN
1. BK
2. RD
3. Drain
4. GN/YE
ITC/PLTC PVC Plum
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF51124-*M†
ITC-Exposed Run/Direct
Burial/PLTC PVC Blue
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF51330-*M†
Pinout
1. RD
2. BK
3. Drain
4. GN/YE
Intrinsically
Safe Analog or
HART control
circuits in Class
I, Division 1
hazardous
locations.
3/4-14NPT
Conduit Entry
Thread.
1. BU
2. BN
3. Drain
4. GN/YE
See page K55 for dimensional drawings.
* Length in meters. Standard cable length is 0.5 meters. Consult factory for other lengths.
Standard coupling nut material is nickel plated brass "P-RKF.."; "P-RKFV.." indicates 316 stainless steel.
Receptacles recommend 1-1/16" (27.0 mm) hole for panel mounting.
†
See pages K236 - K244 for reelfast ® cable information.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K58
TURCK
Process Wiring Products
minifast ® Receptacles with Cable, 2-Wire Analog or HART Control Circuits
• Male Receptacles
• IEC IP 67 Protection
• 300 V, 9 A
(use as ITC limited to 150 V, 5 A)
Housing Style
Part Number
Cable
P-RSF 30-026-*/14.75/NPT
ITC/PLTC PVC Plum
2x18 AWG, 1 STP
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF51026-*M†
P-RSF 40-949-*/14.75/NPT
ITC/PLTC PVC Plum
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF50949-*M†
P-RSF 40-162-*/14.75/NPT
ITC-Exposed Run/Direct
Burial/PLTC PVC Plum
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF51162-*M†
P-RSF 45-098-*/14.75/NPT
ITC/PLTC PVC Plum
3x16 AWG, 1 STP with GND
Foil/Drain (18)
105°C
7.6 mm OD
Cable #RF51098-*M†
4
P-RSF 46-124-*/14.75/NPT
P-RSF 461-124-*/14.75/NPT
P-RSF 40-330-*/14.75/NPT
P-RSF 40-950-*/14.75/NPT
Application
1. BU
2. BN
3. Drain
Analog or HART
control circuits
in Class I,
Division 2
hazardous
locations or
unclassified
locations.
3/4-14NPT
Conduit Entry
Thread.
ITC/PLTC PVC Blue
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF50950-*M†
1. BU
2. BN
3. Drain
4. GN/YE
1. WH
2. BK
3. Drain
4. GN
1. BK
2. RD
3. Drain
4. GN/YE
ITC/PLTC PVC Plum
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF51124-*M†
ITC-Exposed Run/Direct
Burial/PLTC PVC Blue
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF51330-*M†
Pinout
1. RD
2. BK
3. Drain
4. GN/YE
Intrinsically Safe
Analog or HART
control circuits
in Class I,
Division 1
hazardous
locations.
3/4-14NPT
Conduit Entry
Thread.
1. BU
2. BN
3. Drain
4. GN/YE
See page K55 for dimensional drawings.
* Length in meters. Standard cable length is 0.5 meters. Consult factory for other lengths.
Standard coupling nut material is nickel plated brass "P-RSF.."; "P-RSFV.." indicates 316 stainless steel.
Receptacles recommend 1-1/16" (27.0 mm) hole for panel mounting.
†
See pages K236 - K244 for reelfast ® cable information.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
K59
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
minifast ® Receptacles with Cable, 2-Wire Analog or HART Control Circuits
• Female Receptacles
• IEC IP 67 Protection
• 300 V, 9 A
(use as ITC limited to 150 V, 5 A)
Housing Style
Part Number
Cable
Application
Pinout
P-RKF 30-026-*/M20
ITC/PLTC PVC Plum
2x18 AWG, 1 STP
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF51026-*M†
P-RKF 40-949-*/M20
ITC/PLTC PVC Plum
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF50949-*M†
P-RKF 40-162-*/M20
ITC-Exposed Run/Direct
Burial/PLTC PVC Plum
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF51162-*M†
P-RKF 45-098-*/M20
ITC/PLTC PVC Plum
3x16 AWG, 1 STP with GND
Foil/Drain (18)
105°C
7.6 mm OD
Cable #RF51098-*M†
P-RKF 46-124-*/M20
ITC/PLTC PVC Plum
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF51124-*M†
1. BK
2. RD
3. Drain
4. GN/YE
P-RKF 461-124-*/M20
ITC/PLTC PVC Plum
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF51124-*M†
1. RD
2. BK
3. Drain
4. GN/YE
P-RKF 40-330-*/M20
ITC-Exposed Run/Direct
Burial/PLTC PVC Blue
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF51330-*M†
5
P-RKF 40-950-*/M20
ITC/PLTC PVC Blue
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF50950-*M†
1. BU
2. BN
3. Drain
1. BU
2. BN
3. Drain
4. GN/YE
Analog or HART
control circuits in
Class I, Division 2
hazardous locations
or unclassified
locations.
M20 Conduit Entry
Thread.
Intrinsically Safe
Analog or HART
control circuits in
Class I, Division 1
hazardous locations.
M20 Conduit Entry
Thread.
1. WH
2. BK
3. Drain
4. GN
1. BU
2. BN
3. Drain
4. GN/YE
See page K55 for dimensional drawings.
* Length in meters. Standard cable length is 0.5 meters. Consult factory for other lengths.
Standard coupling nut material is nickel plated brass "P-RKF.."; "P-RKFV.." indicates 316 stainless steel.
Receptacles recommend 13/16" (21.0 mm) hole for panel mounting.
†
See pages K236 - K244 for reelfast ® cable information.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K60
TURCK
Process Wiring Products
minifast ® Receptacles with Cable, 2-Wire Analog or HART Control Circuits
• Male Receptacles
• IEC IP 67 Protection
• 300 V, 9 A
(use as ITC limited to 150 V, 5 A)
Housing Style
Part Number
Cable
Application
Pinout
P-RSF 30-026-*/M20
ITC/PLTC PVC Plum
2x18 AWG, 1 STP
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF51026-*M†
P-RSF 40-949-*/M20
ITC/PLTC PVC Plum
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF50949-*M†
P-RSF 40-162-*/M20
ITC-Exposed Run/Direct
Burial/PLTC PVC Plum
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF51162-*M†
P-RSF 45-098-*/M20
ITC/PLTC PVC Plum
3x16 AWG, 1 STP with GND
Foil/Drain (18)
105°C
7.6 mm OD
Cable #RF51098-*M†
P-RSF 46-124-*/M20
ITC/PLTC PVC Plum
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF51124-*M†
1. BK
2. RD
3. Drain
4. GN/YE
P-RSF 461-124-*/M20
ITC/PLTC PVC Plum
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF51124-*M†
1. RD
2. BK
3. Drain
4. GN/YE
P-RSF 40-330-*/M20
ITC-Exposed Run/Direct
Burial/PLTC PVC Blue
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF51330-*M†
6
P-RSF 40-950-*/M20
ITC/PLTC PVC Blue
3x18 AWG, 1 STP with GND
Foil/Drain (20)
105°C
7.2 mm OD
Cable #RF50950-*M†
1. BU
2. BN
3. Drain
1. BU
2. BN
3. Drain
4. GN/YE
Analog or HART
control circuits in
Class I, Division 2
hazardous locations
or unclassified
locations.
M20 Conduit Entry
Thread.
Intrinsically Safe
Analog or HART
control circuits in
Class I, Division 1
hazardous locations.
M20 Conduit Entry
Thread.
1. WH
2. BK
3. Drain
4. GN
1. BU
2. BN
3. Drain
4. GN/YE
See page K55 for dimensional drawings.
* Length in meters. Standard cable length is 0.5 meters. Consult factory for other lengths.
Standard coupling nut material is nickel plated brass "P-RSF.."; "P-RSFV.." indicates 316 stainless steel.
Receptacles recommend 13/16" (21.0 mm) hole for panel mounting.
†
See pages K236 - K244 for reelfast ® cable information.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
K61
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
Notes:
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K62
TURCK
Process Wiring Products
minifast ® Receptacles with Leads, 2-Wire Analog or HART Control Circuits
1
P-RKF ..
2
Page K65
P-RSF ..
Page K66
3
P-RKF .. 14.5/NPT
4
Page K67
P-RSF .. 14.5/NPT
Page K68
5
P-RKF .. 14.75/NPT
6
Page K69
P-RSF .. 14.75/NPT
7
P-RKF .. M20
K63
Page K70
8
Page K71
P-RSF .. M20
Page K72
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
minifast ® Explosionproof Receptacles with Leads, 2-Wire Analog or HART Control Circuits
9
P-RKFV .. EX-*/14.5/NPT
10
Page K73
P-RSFV .. EX-*/14.5/NPT
11
P-RKFV .. EX-*/14.75/NPT
Page K74
12
Page K75
P-RSFV .. EX-*/14.75/NPT
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
Page K76
www.turck.com
www.barr-thorp.com
K64
TURCK
Process Wiring Products
minifast ® Receptacles with Leads, 2-Wire Analog or HART Control Circuits
• Female Receptacles
• NEMA 1, 3, 4, 6P and IEC IP 67
Protection
Housing Style
Part Number
P-RKF 30-*
1
P-RKF 30D-*
P-RKF 321-*
Lead Specs
UL, CSA
2x18 AWG
105°C
600 V, 9A
UL, CSA
3x18 AWG
105°C
600 V, 9A
Features
Pinout
1/2-14NPSM
1. BU
2. BN
3. N/C
1/2-14NPSM Threads, Drain Wire
1. BU
2. BN
3. GY
1/2-14NPSM Threads
1. GN/YE
2. BN
3. BU
P-RKF 40-*
UL, CSA
3x18 AWG
105°C
600 V, 9A
1/2-14NPSM Threads
1. BU
2. BN
3. N/C
4. GN/YE
P-RKF 40D-*
UL, CSA
4x18 AWG
105°C
600 V, 9A
1/2-14NPSM Threads, Drain Wire
1. BU
2. BN
3. GY
4. GN/YE
See page K63 for dimensional drawings.
* Length in meters. Standard lead length is 0.3 meters. Consult factory for other lengths.
Standard housing material is nickel plated brass "P-RKF.."; "P-RKFV.." indicates 316 stainless steel.
Receptacles recommend 13/16" (21.0 mm) hole for panel mounting.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
K65
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
minifast ® Receptacles with Leads, 2-Wire Analog or HART Control Circuits
• Male Receptacles
• NEMA 1, 3, 4, 6P and IEC IP 67
Protection
Housing Style
Part Number
P-RSF 30-*
2
P-RSF 30D-*
P-RSF 321-*
Lead Specs
UL, CSA
2x18 AWG
105°C
600 V, 9A
UL, CSA
3x18 AWG
105°C
600 V, 9A
Features
Pinout
1/2-14NPSM
1. BU
2. BN
3. N/C
1/2-14NPSM Threads, Drain Wire
1. BU
2. BN
3. GY
1/2-14NPSM Threads
1. GN/YE
2. BN
3. BU
P-RSF 40-*
UL, CSA
3x18 AWG
105°C
600 V, 9A
1/2-14NPSM Threads
1. BU
2. BN
3. N/C
4. GN/YE
P-RSF 40D-*
UL, CSA
4x18 AWG
105°C
600 V, 9A
1/2-14NPSM Threads, Drain Wire
1. BU
2. BN
3. GY
4. GN/YE
See page K63 for dimensional drawings.
* Length in meters. Standard lead length is 0.3 meters. Consult factory for other lengths.
Standard housing material is nickel plated brass "P-RSF.."; "P-RSFV.." indicates 316 stainless steel.
Receptacles recommend 13/16" (21.0 mm) hole for panel mounting.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K66
TURCK
Process Wiring Products
minifast ® Receptacles with Leads, 2-Wire Analog or HART Control Circuits
• Female Receptacles
• NEMA 1, 3, 4, 6P and IEC IP 67
Protection
Housing Style
Part Number
P-RKF 30-*/14.5/NPT
3
P-RKF 30D-*/14.5/NPT
P-RKF 321-*/14.5/NPT
Lead Specs
UL, CSA
2x18 AWG
105°C
600 V, 9A
UL, CSA
3x18 AWG
105°C
600 V, 9A
Features
Pinout
1/2-14NPT Threads
1. BU
2. BN
3. N/C
1/2-14NPT Threads, Drain Wire
1. BU
2. BN
3. GY
1/2-14NPT Threads
1. GN/YE
2. BN
3. BU
P-RKF 40-*/14.5/NPT
UL, CSA
3x18 AWG
105°C
600 V, 9A
1/2-14NPT Threads
1. BU
2. BN
3. N/C
4. GN/YE
P-RKF 40D-*/14.5/NPT
UL, CSA
4x18 AWG
105°C
600 V, 9A
1/2-14NPT Threads, Drain Wire
1. BU
2. BN
3. GY
4. GN/YE
See page K63 for dimensional drawings.
* Length in meters. Standard lead length is 0.3 meters. Consult factory for other lengths.
Standard housing material is nickel plated brass "P-RKF.."; "P-RKFV.." indicates 316 stainless steel.
Receptacles recommend 13/16" (21.0 mm) hole for panel mounting.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
K67
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
minifast ® Receptacles with Leads, 2-Wire Analog or HART Control Circuits
• Male Receptacles
• NEMA 1, 3, 4, 6P and IEC IP 67
Protection
Housing Style
Part Number
P-RSF 30-*/14.5/NPT
4
P-RSF 30D-*/14.5/NPT
P-RSF 321-*/14.5/NPT
Lead Specs
UL, CSA
2x18 AWG
105°C
600 V, 9A
UL, CSA
3x18 AWG
105°C
600 V, 9A
Features
Pinout
1/2-14NPT Threads
1. BU
2. BN
3. N/C
1/2-14NPT Threads, Drain Wire
1. BU
2. BN
3. GY
1/2-14NPT Threads
1. GN/YE
2. BN
3. BU
P-RSF 40-*/14.5/NPT
UL, CSA
3x18 AWG
105°C
600 V, 9A
1/2-14NPT Threads
1. BU
2. BN
3. N/C
4. GN/YE
P-RSF 40D-*/14.5/NPT
UL, CSA
4x18 AWG
105°C
600 V, 9A
1/2-14NPT Threads, Drain Wire
1. BU
2. BN
3. GY
4. GN/YE
See page K63 for dimensional drawings.
* Length in meters. Standard lead length is 0.3 meters. Consult factory for other lengths.
Standard housing material is nickel plated brass "P-RSF.."; "P-RSFV.." indicates 316 stainless steel.
Receptacles recommend 13/16" (21.0 mm) hole for panel mounting.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K68
TURCK
Process Wiring Products
minifast ® Receptacles with Leads, 2-Wire Analog or HART Control Circuits
• Female Receptacles
• NEMA 1, 3, 4, 6P and IEC IP 67
Protection
Housing Style
Part Number
P-RKF 30-*/14.75/NPT
5
P-RKF 30D-*/14.75/NPT
P-RKF 321-*/14.75/NPT
Lead Specs
UL, CSA
2x18 AWG
105°C
600 V, 9A
UL, CSA
3x18 AWG
105°C
600 V, 9A
Features
Pinout
3/4-14NPT Threads
1. BU
2. BN
3. N/C
3/4-14NPT Threads, Drain Wire
1. BU
2. BN
3. GY
3/4-14NPT Threads
1. GN/YE
2. BN
3. BU
P-RKF 40-*/14.75/NPT
UL, CSA
3x18 AWG
105°C
600 V, 9A
3/4-14NPT Threads
1. BU
2. BN
3. N/C
4. GN/YE
P-RKF 40D-*/14.75/NPT
UL, CSA
4x18 AWG
105°C
600 V, 9A
3/4-14NPT Threads, Drain Wire
1. BU
2. BN
3. GY
4. GN/YE
See page K63 for dimensional drawings.
* Length in meters. Standard lead length is 0.3 meters. Consult factory for other lengths.
Standard housing material is nickel plated brass "P-RKF.."; "P-RKFV.." indicates 316 stainless steel.
Receptacles recommend 1-1/16" (27.0 mm) hole for panel mounting.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
K69
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
minifast ® Receptacles with Leads, 2-Wire Analog or HART Control Circuits
• Male Receptacles
• NEMA 1, 3, 4, 6P and IEC IP 67
Protection
Housing Style
Part Number
P-RSF 30-*/14.75/NPT
6
P-RSF 30D-*/14.75/NPT
P-RSF 321-*/14.75/NPT
Lead Specs
UL, CSA
2x18 AWG
105°C
600 V, 9A
UL, CSA
3x18 AWG
105°C
600 V, 9A
Features
Pinout
3/4-14NPT Threads
1. BU
2. BN
3. N/C
3/4-14NPT Threads, Drain Wire
1. BU
2. BN
3. GY
3/4-14NPT Threads
1. GN/YE
2. BN
3. BU
P-RSF 40-*/14.75/NPT
UL, CSA
3x18 AWG
105°C
600 V, 9A
3/4-14NPT Threads
1. BU
2. BN
3. N/C
4. GN/YE
P-RSF 40D-*/14.75/NPT
UL, CSA
4x18 AWG
105°C
600 V, 9A
3/4-14NPT Threads, Drain Wire
1. BU
2. BN
3. GY
4. GN/YE
See page K63 for dimensional drawings.
* Length in meters. Standard lead length is 0.3 meters. Consult factory for other lengths.
Standard housing material is nickel plated brass "P-RSF.."; "P-RSFV.." indicates 316 stainless steel.
Receptacles recommend 1-1/16" (27.0 mm) hole for panel mounting.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K70
TURCK
Process Wiring Products
minifast ® Receptacles with Leads, 2-Wire Analog or HART Control Circuits
• Female Receptacles
• NEMA 1, 3, 4, 6P and IEC IP 67
Protection
Housing Style
Part Number
P-RKF 30-*/M20
7
P-RKF 30D-*/M20
P-RKF 321-*/M20
Lead Specs
UL, CSA
2x18 AWG
105°C
600 V, 9A
UL, CSA
3x18 AWG
105°C
600 V, 9A
Features
Pinout
M20 Threads
1. BU
2. BN
3. N/C
M20 Threads, Drain Wire
1. BU
2. BN
3. GY
M20 Threads
1. GN/YE
2. BN
3. BU
P-RKF 40-*/M20
UL, CSA
3x18 AWG
105°C
600 V, 9A
M20 Threads
1. BU
2. BN
3. N/C
4. GN/YE
P-RKF 40D-*/M20
UL, CSA
4x18 AWG
105°C
600 V, 9A
M20 Threads, Drain Wire
1. BU
2. BN
3. GY
4. GN/YE
See page K63 for dimensional drawings.
* Length in meters. Standard lead length is 0.3 meters. Consult factory for other lengths.
Standard housing material is nickel plated brass "P-RKF.."; "P-RKFV.." indicates 316 stainless steel.
Receptacles recommend 13/16" (21.0 mm) hole for panel mounting.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
K71
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
minifast ® Receptacles with Leads, 2-Wire Analog or HART Control Circuits
• Male Receptacles
• NEMA 1, 3, 4, 6P and IEC IP 67
Protection
Housing Style
Part Number
P-RSF 30-*/M20
8
P-RSF 30D-*/M20
P-RSF 321-*/M20
Lead Specs
UL, CSA
2x18 AWG
105°C
600 V, 9A
UL, CSA
3x18 AWG
105°C
600 V, 9A
Features
Pinout
M20 Threads
1. BU
2. BN
3. N/C
M20 Threads, Drain Wire
1. BU
2. BN
3. GY
M20 Threads
1. GN/YE
2. BN
3. BU
P-RSF 40-*/M20
UL, CSA
3x18 AWG
105°C
600 V, 9A
M20 Threads
1. BU
2. BN
3. N/C
4. GN/YE
P-RSF 40D-*/M20
UL, CSA
4x18 AWG
105°C
600 V, 9A
M20 Threads, Drain Wire
1. BU
2. BN
3. GY
4. GN/YE
See page K63 for dimensional drawings.
* Length in meters. Standard lead length is 0.3 meters. Consult factory for other lengths.
Standard housing material is nickel plated brass "P-RSF.."; "P-RSFV.." indicates 316 stainless steel.
Receptacles recommend 13/16" (21.0 mm) hole for panel mounting.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K72
TURCK
Process Wiring Products
minifast ® Explosionproof Receptacles with Leads, 2-Wire Analog or HART Control Circuits
• Female Receptacles
• NEMA 1, 3, 4, 6P and IEC IP 67
Protection
Housing Style
Part Number
Lead Specs
Features
Pinout
P-RKFV 30 EX-*/14.5/NPT
UL, CSA
2x18 AWG
105°C
600 V, 9 A
Explosionproof Receptacle,
1/2-14NPT Threads
1. BU
2. BN
3. N/C
P-RKFV 30D EX-*/14.5/NPT
UL, CSA
3x18 AWG
105°C
600 V, 9 A
Explosionproof Receptacle,
1/2-14NPT Threads, Drain Wire
1. BU
2. BN
3. GY
P-RKFV 40 EX-*/14.5/NPT
UL, CSA
3x18 AWG
105°C
600 V, 9 A
Explosionproof Receptacle,
1/2-14NPT Threads
1. BU
2. BN
3. N/C
4. GN/YE
P-RKFV 40D EX-*/14.5/NPT
UL, CSA
4x18 AWG
105°C
600 V, 9 A
Explosionproof Receptacle,
1/2-14NPT Threads, Drain Wire
1. BU
2. BN
3. GY
4. GN/YE
9
See page K64 for dimensional drawings.
* Length in meters. Standard lead length is 0.3 meters. Consult factory for other lengths.
Standard housing material is 316 stainless steel.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
K73
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
minifast ® Explosionproof Receptacles with Leads, 2-Wire Analog or HART Control Circuits
• Male Receptacles
• NEMA 1, 3, 4, 6P and IEC IP 67
Protection
Housing Style
Part Number
Lead Specs
Features
Pinout
P-RSFV 30 EX-*/14.5/NPT
UL, CSA
2x18 AWG
105°C
600 V, 9 A
Explosionproof Receptacle,
1/2-14NPT Threads
1. BU
2. BN
3. N/C
P-RSFV 30D EX-*/14.5/NPT
UL, CSA
3x18 AWG
105°C
600 V, 9 A
Explosionproof Receptacle,
1/2-14NPT Threads, Drain Wire
1. BU
2. BN
3. GY
P-RSFV 40 EX-*/14.5/NPT
UL, CSA
3x18 AWG
105°C
600 V, 9 A
Explosionproof Receptacle,
1/2-14NPT Threads
1. BU
2. BN
3. N/C
4. GN/YE
P-RSFV 40D EX-*/14.5/NPT
UL, CSA
4x18 AWG
105°C
600 V, 9 A
Explosionproof Receptacle,
1/2-14NPT Threads, Drain Wire
1. BU
2. BN
3. GY
4. GN/YE
10
See page K64 for dimensional drawings.
* Length in meters. Standard lead length is 0.3 meters. Consult factory for other lengths.
Standard housing material is 316 stainless steel.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K74
TURCK
Process Wiring Products
minifast ® Explosionproof Receptacles with Leads, 2-Wire Analog or HART Control Circuits
• Female Receptacles
• NEMA 1, 3, 4, 6P and IEC IP 67
Protection
Housing Style
Part Number
Lead Specs
Features
Pinout
P-RKFV 30 EX-*/14.75/NPT
UL, CSA
2x18 AWG
105°C
600 V, 9 A
Explosionproof Receptacle,
3/4-14NPT Threads
1. BU
2. BN
3. N/C
P-RKFV 30D EX-*/14.75/NPT
UL, CSA
3x18 AWG
105°C
600 V, 9 A
Explosionproof Receptacle,
3/4-14NPT Threads, Drain Wire
1. BU
2. BN
3. GY
P-RKFV 40 EX-*/14.75/NPT
UL, CSA
3x18 AWG
105°C
600 V, 9 A
Explosionproof Receptacle,
3/4-14NPT Threads
1. BU
2. BN
3. N/C
4. GN/YE
P-RKFV 40D EX-*/14.75/NPT
UL, CSA
4x18 AWG
105°C
600 V, 9 A
Explosionproof Receptacle,
3/4-14NPT Threads, Drain Wire
1. BU
2. BN
3. GY
4. GN/YE
11
See page K64 for dimensional drawings.
* Length in meters. Standard lead length is 0.3 meters. Consult factory for other lengths.
Standard housing material is 316 stainless steel.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
K75
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
minifast ® Explosionproof Receptacles with Leads, 2-Wire Analog or HART Control Circuits
• Male Receptacles
• NEMA 1, 3, 4, 6P and IEC IP 67
Protection
Housing Style
Part Number
Lead Specs
Features
Pinout
P-RSFV 30 EX-*/14.75/NPT
UL, CSA
2x18 AWG
105°C
600 V, 9 A
Explosionproof Receptacle,
3/4-14NPT Threads
1. BU
2. BN
3. N/C
P-RSFV 30D EX-*/14.75/NPT
UL, CSA
3x18 AWG
105°C
600 V, 9 A
Explosionproof Receptacle,
3/4-14NPT Threads, Drain Wire
1. BU
2. BN
3. GY
P-RSFV 40 EX-*/14.75/NPT
UL, CSA
3x18 AWG
105°C
600 V, 9 A
Explosionproof Receptacle,
3/4-14NPT Threads
1. BU
2. BN
3. N/C
4. GN/YE
P-RSFV 40D EX-*/14.75/NPT
UL, CSA
4x18 AWG
105°C
600 V, 9 A
Explosionproof Receptacle,
3/4-14NPT Threads, Drain Wire
1. BU
2. BN
3. GY
4. GN/YE
12
See page K64 for dimensional drawings.
* Length in meters. Standard lead length is 0.3 meters. Consult factory for other lengths.
Standard housing material is 316 stainless steel.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K76
TURCK
Process Wiring Products
minifast ® "Y" Fittings, 2-Wire Analog or HART Control Circuits
• 600 V
• Installs in Standard Conduit Entries
• 9 A Per Conductor
• Stainless Steel Housing
1/2-14NPT
Specifications
Wiring Housing
Dia. Material
3/4-14NPT
J1
J2
P1
P2
P1
J2
J1
J2
Female
Female
Male
Male
Male
Female
Female
Female
4/18 AWG leads
per connector
1
SS
P-2RKFV-40EX-*/14.5/NPT
P-2RSFV-40EX-*/14.5/NPT
P-RSFV RKFV-40EX-*/14.5/NPT
P-2RKFV-40EX-*/14.75/NPT
3/18 AWG leads
per connector
2
SS
P-2RKFV-40BEX-*/14.5/NPT P-2RSFV-40BEX-*/14.5/NPT
P-RSFV RKFV-40BEX-*/14.5/NPT
P-2RKFV-40BEX-*/14.75/NPT
* Length in meters.
SS = Stainless steel
Dimensions
Wiring Diagrams
1
K77
2
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
Specifications
Housing:
Contact Carrier:
Electrical Ratings:
Temperature:
Contacts:
Protection:
Leads:
316 stainless steel (SS), passivated.
PUR black.
600 V, 9 A per conductor.
-30° to +105°C (-22° to +221°F).
Gold plated brass.
IP 67 (only when all receptacles are mated or covered with plugs).
High flex stranding, PVC, insulated, 600 V, UL recognized, CSA certified.
3/4-14NPT
M20x1.5
P1
P2
P1
J2
J1
J2
P1
P2
P1
J2
Male
Male
Male
Female
Female
Female
Male
Male
Male
Female
P-2RSFV-40EX-*/14.75/NPT
P-RSFV RKFV-40EX-*/14.75/NPT
P-2RKFV-40EX-*/M20
P-2RSFV-40EX-*/M20
P-RSFV RKFV-40EX-*/M20
P-2RSFV-40BEX-*/14.75/NPT
P-RSFV RKFV-40BEX-*/14.75/NPT
P-2RKFV-40BEX-*/M20
P-2RSFV-40BEX-*/M20
P-RSFV RKFV-40BEX-*/M20
Dimensions
Pinouts
Female
Male
4-Pin
4-Pin
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K78
TURCK
Process Wiring Products
multibox ® minifast ® Metal Junction Boxes w/Integral Home Run Cable
• Consolidation of 2-wire Analog or HART Control Circuits in Hazardous Locations** or
Unclassified Locations
FM approved for installation in hazardous locations when installed per TURCK Control
Drawing QCF-00147 (www.turck.com/fmcd) using specified accessory equipment.
"/C" versions CSA certified for installation in hazardous locations when installed per TURCK
Control Drawing Ni-2.404(www.turck.com/fmcd) using certified accessory equipment.
4-port, 1 Analog Signal Per Port, Common Ground and Shield
Application
4-port cast
aluminum junction
box, minifast port
connectors, integral
home-run cable
Specifications
Pinout
Home-run cable with 4/22
AWG shielded twisted pairs,
each with 22 AWG drain†,
plus overall shield with 22
AWG drain and 18 AWG
overall ground, 10.0 mm OD
Port, Pin
Port 1, Pin 1
Port 1, Pin 2
Port 2, Pin 1
Port 2, Pin 2
Port 3, Pin 1
Wire Color
WH/BK
BK/WH
WH/GN
GN/WH
WH/RD
Port, Pin
Port 3, Pin 2
Port 4, Pin 1
Port 4, Pin 2
Ports 1-4, Pin 3
Ports 1-4, Pin 4
Nickel Plated Brass
Wire Color
RD/WH
WH/OG
OG/WH
Drain
GN/YE
Stainless Steel
P-4 RKF 40-960-*
P-4 RKFV 40-960-*
P-4 RKF 40-415-*/C
P-4 RKFV 40-415-*/C
8-port, 1 Analog Signal Per Port, Common Ground and Shield
Application
8-port cast
aluminum junction
box, minifast port
connectors, integral
home-run cable
Specifications
Pinout
Home-run cable with 8/22
AWG shielded twisted pairs,
each with 22 AWG drain†,
plus overall shield with 22
AWG drain and 18 AWG
overall ground, 12.0 mm OD
Port, Pin
Port 1, Pin 1
Port 1, Pin 2
Port 2, Pin 1
Port 2, Pin 2
Port 3, Pin 1
Port 3, Pin 2
Port 4, Pin 1
Port 4, Pin 2
Port 5, Pin 1
Wire Color
WH/BK
BK/WH
WH/GN
GN/WH
WH/RD
RD/WH
WH/OG
OG/WH
WH/BU
Port, Pin
Port 5, Pin 2
Port 6, Pin 1
Port 6, Pin 2
Port 7, Pin 1
Port 7, Pin 2
Port 8, Pin 1
Port 8, Pin 2
Ports 1-8, Pin 3
Ports 1-8, Pin 4
Nickel Plated Brass
Wire Color
BU/WH
WH/BN
BN/WH
WH/YE
YE/WH
WH/VT
VT/WH
Drain
GN/YE
Stainless Steel
P-8 RKF 40-959-*
P-8 RKFV 40-959-*
P-8 RKF 40-416-*/C
P-8 RKFV 40-416-*/C
* Length in meters.
** Use with lokfast LOCK-MINI or LOCK-MINI-FW for port connectors in Class I, Division 2 applications and for mating home run cable use
"L" and "T" versions.
†
Each circuit has dedicated drain wire not connected in the junction box.
Wiring Diagrams
4-Port
K79
8-Port
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
Specifications
Housing:
Connectors
Temperature:
Contacts:
Cable:
Die-cast aluminum alloy.
Nickel plated brass or 316 stainless steel housings (see table), oil resistant PUR contact carrier.
-30° to +80°C (-22° to +176°F).
Gold plated brass.
Standard Version: Plum PVC jacket, UL ITC/PLTC/AWM, CSA CMX-Outdoor/CMG/AWM FT4, 300 V, 105°C.
"/C" Versions:
Plum PUR jacket, UL ITC/PLTC, CSA CIC/CMX-Outdoor-CM, 300 V, 105°C, FT1.
Protection:
IP 67.
Electrical Rating: Standard Version: 300 V, 4 A per conductor (use as ITC is limited to 150 V, 3 A for 22 AWG conductors).
"/C" Versions:
30 V, 600 mA
Dimensions
4-Port
8-Port
Notes:
1. Clearance hole for 1/4-20 mounting screws (2 not included).
Pinouts
Female
4-Pin
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K80
TURCK
Process Wiring Products
multibox ® minifast ® Metal Junction Boxes w/Integral Home Run Cable
• Consolidation of 2-wire Analog or HART Control Circuits in Hazardous Locations or
Unclassified Locations
• Blue Jacket Color may be used as Identification of Intrinsically Safe Circuits.
FM approved for installation in hazardous locations when installed per TURCK Control
Drawing QCF-00147 (www.turck.com/fmcd) using specified accessory equipment.
"/C" versions CSA certified for installation in hazardous locations when installed per TURCK
Control Drawing Ni-2.404(www.turck.com/fmcd) using certified accessory equipment.
4-port, 1 Analog Signal Per Port, Common Ground and Shield
Application
4-port cast aluminum
junction box, minifast
port connectors, integral
home-run cable
Specifications
Home-run cable with 4/22
AWG shielded twisted
pairs, each with 22 AWG
drain†, plus overall shield
with 22 AWG drain and
18 AWG overall ground,
12.0 mm OD
Pinout
Port, Pin
Port 1, Pin 1
Port 1, Pin 2
Port 2, Pin 1
Port 2, Pin 2
Port 3, Pin 1
Wire Color
WH/BK
BK/WH
WH/GN
GN/WH
WH/RD
Port, Pin
Port 3, Pin 2
Port 4, Pin 1
Port 4, Pin 2
Ports 1-4, Pin 3
Ports 1-4, Pin 4
Nickel Plated Brass
Wire Color
RD/WH
WH/OG
OG/WH
Drain
GN/YE
Stainless Steel
P-4 RKF 40-978-*
P-4 RKFV 40-978-*
P-4 RKF 40-978-*/C
P-4 RKFV 40-978-*/C
8-port, 1 Analog Signal Per Port, Common Ground and Shield
Application
8-port cast aluminum
junction box, minifast
port connectors, integral
home-run cable
Specifications
Home-run cable with 8/22
AWG shielded twisted
pairs, each with 22 AWG
drain†, plus overall shield
with 22 AWG drain and
18 AWG overall ground,
12.0 mm OD
Pinout
Port, Pin
Port 1, Pin 1
Port 1, Pin 2
Port 2, Pin 1
Port 2, Pin 2
Port 3, Pin 1
Port 3, Pin 2
Port 4, Pin 1
Port 4, Pin 2
Port 5, Pin 1
Wire Color
WH/BK
BK/WH
WH/GN
GN/WH
WH/RD
RD/WH
WH/OG
OG/WH
WH/BU
Port, Pin
Port 5, Pin 2
Port 6, Pin 1
Port 6, Pin 2
Port 7, Pin 1
Port 7, Pin 2
Port 8, Pin 1
Port 8, Pin 2
Ports 1-8, Pin 3
Ports 1-8, Pin 4
Nickel Plated Brass
Wire Color
BU/WH
WH/BN
BN/WH
WH/YE
YE/WH
WH/VT
VT/WH
Drain
GN/YE
Stainless Steel
P-8 RKF 40-977-*
P-8 RKFV 40-977-*
P-8 RKF 40-977-*/C
P-8 RKFV 40-977-*/C
* Length in meters.
†
Each circuit has dedicated drain wire not connected in the junction box.
Wiring Diagrams
4-Port Diagram
K81
8-Port Diagram
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
Specifications
Housing:
Connectors
Temperature:
Contacts:
Cable:
Protection:
Electrical Rating:
Die-cast aluminum alloy.
Nickel plated brass or 316 stainless steel housings (see table), oil resistant PUR contact carrier.
-30° to +80°C (-22° to +176°F).
Gold plated brass.
Blue PVC jacket, UL ITC/PLTC/AWM, CSA CMX-Outdoor/CMG/AWM FT4, 300 V, 105°C.
IP 67.
Standard Version: 300 V, 4 A per conductor (use as ITC is limited to 150 V, 3 A for 22 AWG conductors).
"/C" Versions:
30 V, 600 mA
Dimensions
4-Port
8-Port
Notes:
1. Clearance hole for 1/4-20 mounting screws (2 not included).
Pinouts
Female
4-Pin
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K82
TURCK
Process Wiring Products
multibox ® minifast ® Metal Junction Boxes
• Consolidation of 2-wire Analog or HART Control Circuits in Hazardous Locations* or
Unclassified Locations
FM approved for installation in hazardous locations when installed per TURCK Control
Drawing QCF-00147 (www.turck.com/fmcd) using specified accessory equipment.
"/C" versions CSA certified for installation in hazardous locations when installed per TURCK
Control Drawing Ni-2.404(www.turck.com/fmcd) using certified accessory equipment.
4-port, Common Ground and Shield
Application
Specifications
4-port cast aluminum
junction box, minifast
port connectors,
multifast ® home-run
connector, 1 analog
signal per port
12-pin multifast connector,
9 conductors plus drain
Pinout
Port, Pin
Port 1, Pin 1
Port 1, Pin 2
Port 2, Pin 1
Port 2, Pin 2
Port 3, Pin 1
Port 3, Pin 2
Home Run
1
2
3
4
5
6
Nickel Plated Brass
Port, Pin
Port 4, Pin 1
Port 4, Pin 2
NC
NC
Ports 1-4, Pin 3
Ports 1-4, Pin 4
Home Run
7
8
9
10
11
12
Stainless Steel
P-4 RKF 40-CS12
P-4 RKFV 40-CSV12
P-4 RKF 40-CS12/C
P-4 RKFV 40-CSV12/C
See pages K85 - K92 for mating home run cordsets.
8-port, Common Ground and Shield
Application
8-port cast aluminum
junction box, minifast
port connectors,
multifast home-run
connector, 1 analog
signal per port
Specifications
19-pin multifast connector,
17 conductors plus drain
Pinout
Port, Pin
Port 1, Pin 1
Port 1, Pin 2
Port 2, Pin 1
Port 2, Pin 2
Port 3, Pin 1
Ports 1-8, Pin 3
Port 3, Pin 2
Port 4, Pin 1
Port 4, Pin 2
Home Run
1
2
3
4
5
6
7
8
9
Nickel Plated Brass
Port, Pin
Port 5, Pin 1
Port 5, Pin 2
Ports 1-8, Pin 4
Port 6, Pin 1
Port 6, Pin 2
Port 7, Pin 1
Port 7, Pin 2
Port 8, Pin 1
Port 8, Pin 2
NC
Home Run
10
11
12
13
14
15
16
17
18
19
Stainless Steel
P-8 RKF 40-CS19
P-8 RKFV 40-CSV19
P-8 RKF 40-CS19/C
P-8 RKFV 40-CSV19/C
* Use with lokfast LOCK-MINI or LOCK-MINI-FW for port connectors in Class I, Division 2 applications and for mating Home-Run cable use
"L" and "T" versions.
See pages K85 - K92 for mating home run cordsets.
Wiring Diagrams
4-Port Diagram, 1 Analog Signal Per Port
K83
8-Port Diagram, 1 Analog Signal Per Port
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
Specifications
Housing:
Connectors
Temperature:
Contacts:
Protection:
Electrical Rating:
Die-cast aluminum alloy.
Nickel plated brass or 316 stainless steel housings (see table), oil resistant PUR contact carrier.
-30° to +80°C (-22° to +176°F).
Gold plated brass.
IP 67.
Standard Version: 12-pin: 300 V, 4 A per conductor.
19-pin: 150 V, 5 A per conductor.
"/C" Versions:
30 V, 600 mA
Dimensions
4-Port
8-Port
Notes:
1. Clearance hole for 1/4-20 mounting screws (2 not included).
Pinouts
Female
4-Pin minifast ®
Male
12-Pin multifast ®
19-Pin multifast
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K84
TURCK
Process Wiring Products
multifast ® Home Run Cordsets, 2-Wire Analog or HART Control Circuits
• Straight Female Connectors
• NEMA 1, 3, 4, 6P and IEC IP 67
Protection
Housing Style
P-CKM ..
Part Number
Cable
P-CKM 12-960-*
ITC/PLTC PVC Plum
8x22 AWG, 4 STP with GND
Foil/Drain (22)
105°C
250 V, 4 A
10 mm OD
Cable #RF50960-*M†
P-CKM 12-229-*
ITC-Exposed Run/Direct
Burial/PLTC PVC Plum
8x22 AWG, 4 STP with GND
Foil/Drain (22)
105°C
250 V, 4 A
9.6 mm OD
Cable #RF51229-*M†
P-CKM 12-415-*
CSA CIC/CMX-Outdoor-CM
UL ITC/PLTC PUR Plum
8x22 AWG, 4 STP with GND
Foil/Drain (22)
105°C
250 V, 4 A
9.6 mm OD
Cable #RF5145-*M†
**P-CKML .. (for Class I, Division 2
P-CKM 19-959-*
applications)
ITC/PLTC PVC Plum
16x22 AWG, 8 STP with GND
Foil/Drain (22)
105°C
150 V, 2 A
12 mm OD
Cable #RF50959-*M†
P-CKM 19-230-*
ITC-Exposed Run/Direct
Burial/PLTC PVC Plum
16x22 AWG, 8 STP with GND
Foil/Drain (22)
105°C
150 V, 2 A
12.7 mm OD
Cable #RF51230-*M†
P-CKM 19-416-*
CSA CIC/CMX-Outdoor-CM
UL ITC/PLTC PUR Plum
16x22 AWG, 8 STP with GND
Foil/Drain (22)
105°C
150 V, 2 A
12.5 mm OD
Cable #RF5146-*M†
Application
Pinout
1. WH/BK
2. BK/WH
3. WH/GN
4. GN/WH
5. WH/RD
6. RD/WH
7. WH/OG
8. OG/WH
9. N/C
10. N/C
11. Drain
12. GN/YE
1. WH/BK
2. BK/WH
3. WH/GN
4. GN/WH
5. WH/RD
6. Drain
7. RD/WH
8. WH/OG
9. OG/WH
10. WH/BU
11. BU/WH
12. GN/YE
13. WH/BN
14. BN/WH
15. WH/YE
16. YE/WH
17. WH/VT
18. VT/WH
19. N/C
Analog or HART
control circuits in
Class I, Division 2
hazardous
locations** or
unclassified
locations.
* Length in meters. Standard cable length is 5 meters. Consult factory for other lengths.
Standard coupling nut material is nickel plated brass "P-CKM(L).."; "P-CKM(T)V.." indicates 316 stainless steel.
†
See pages K236 - K244 for reelfast ® cable information.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
K85
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
multifast ® Home Run Cordsets, 2-Wire Analog or HART Control Circuits
• Straight Male Connectors
• NEMA 1, 3, 4, 6P and IEC IP 67
Protection
Housing Style
Part Number
P-CSM 12-960-*
P-CSM 12-229-*
ITC-Exposed Run/Direct
Burial/PLTC PVC Plum
8x22 AWG, 4 STP with GND
Foil/Drain (22)
105°C
250 V, 4 A
9.6 mm OD
Cable #RF51229-*M†
P-CSM 12-415-*
CSA CIC/CMX-Outdoor-CM
UL ITC/PLTC PUR Plum
8x22 AWG, 4 STP with GND
Foil/Drain (22)
105°C
250 V, 4 A
9.6 mm OD
Cable #RF5145-*M†
P-CSM ..
**P-CSML .. (for Class I,
Division 2 applications)
Cable
ITC/PLTC PVC Plum
8x22 AWG, 4 STP with GND
Foil/Drain (22)
105°C
250 V, 4 A
10 mm OD
Cable #RF50960-*M†
P-CSM 19-959-*
ITC/PLTC PVC Plum
16x22 AWG, 8 STP with GND
Foil/Drain (22)
105°C
150 V, 2 A
12 mm OD
Cable #RF50959-*M†
P-CSM 19-230-*
ITC-Exposed Run/Direct
Burial/PLTC PVC Plum
16x22 AWG, 8 STP with GND
Foil/Drain (22)
105°C
150 V, 2 A
12.7 mm OD
Cable #RF51230-*M†
P-CSM 19-416-*
CSA CIC/CMX-Outdoor-CM
UL ITC/PLTC PUR Plum
16x22 AWG, 8 STP with GND
Foil/Drain (22)
105°C
150 V, 2 A
12.5 mm OD
Cable #RF5146-*M†
Application
Pinout
1. WH/BK
2. BK/WH
3. WH/GN
4. GN/WH
5. WH/RD
6. RD/WH
7. WH/OG
8. OG/WH
9. N/C
10. N/C
11. Drain
12. GN/YE
1. WH/BK
2. BK/WH
3. WH/GN
4. GN/WH
5. WH/RD
6. Drain
7. RD/WH
8. WH/OG
9. OG/WH
10. WH/BU
11. BU/WH
12. GN/YE
13. WH/BN
14. BN/WH
15. WH/YE
16. YE/WH
17. WH/VT
18. VT/WH
19. N/C
Analog or HART
control circuits in
Class I, Division 2
hazardous
locations** or
unclassified
locations.
* Length in meters. Standard cable length is 5 meters. Consult factory for other lengths.
Standard coupling nut material is nickel plated brass "P-CSM(L).."; "P-CSM(T)V.." indicates 316 stainless steel.
†
See pages K236 - K244 for reelfast ® cable information.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K86
TURCK
Process Wiring Products
multifast ® Home Run Cordsets, 2-Wire Analog or HART Control Circuits
• Right Angle Female Connectors
• NEMA 1, 3, 4, 6P and IEC IP 67
Protection
Housing Style
Part Number
Cable
P-CKWM 12-960-*
ITC/PLTC PVC Plum
8x22 AWG, 4 STP with GND
Foil/Drain (22)
105°C
250 V, 4 A
10 mm OD
Cable #RF50960-*M†
P-CKWM 12-229-*
ITC-Exposed Run/Direct
Burial/PLTC PVC Plum
8x22 AWG, 4 STP with GND
Foil/Drain (22)
105°C
250 V, 4 A
9.6 mm OD
Cable #RF51229-*M†
P-CKWM 12-415-*
CSA CIC/CMX-Outdoor-CM
UL ITC/PLTC PUR Plum
8x22 AWG, 4 STP with GND
Foil/Drain (22)
105°C
250 V, 4 A
9.6 mm OD
Cable #RF5145-*M†
P-CKWM ..
**P-CKWML .. (for Class I, Division
P-CKWM 19-959-*
2 applications)
ITC/PLTC PVC Plum
16x22 AWG, 8 STP with GND
Foil/Drain (22)
105°C
150 V, 2 A
12 mm OD
Cable #RF50959-*M†
P-CKWM 19-230-*
ITC-Exposed Run/Direct
Burial/PLTC PVC Plum
16x22 AWG, 8 STP with GND
Foil/Drain (22)
105°C
150 V, 2 A
12.7 mm OD
Cable #RF51230-*M†
P-CKWM 19-416-*
CSA CIC/CMX-Outdoor-CM
UL ITC/PLTC PUR Plum
16x22 AWG, 8 STP with GND
Foil/Drain (22)
105°C
150 V, 2 A
12.5 mm OD
Cable #RF5146-*M†
Application
Pinout
1. WH/BK
2. BK/WH
3. WH/GN
4. GN/WH
5. WH/RD
6. RD/WH
7. WH/OG
8. OG/WH
9. N/C
10. N/C
11. Drain
12. GN/YE
1. WH/BK
2. BK/WH
3. WH/GN
4. GN/WH
5. WH/RD
6. Drain
7. RD/WH
8. WH/OG
9. OG/WH
10. WH/BU
11. BU/WH
12. GN/YE
13. WH/BN
14. BN/WH
15. WH/YE
16. YE/WH
17. WH/VT
18. VT/WH
19. N/C
Analog or HART
control circuits in
Class I, Division 2
hazardous
locations** or
unclassified
locations.
* Length in meters. Standard cable length is 5 meters. Consult factory for other lengths.
Standard coupling nut material is nickel plated brass "P-CKWM(L).."; "P-CKWM(T)V.." indicates 316 stainless steel.
†
See pages K236 - K244 for reelfast ® cable information.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
K87
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
multifast ® Home Run Cordsets, 2-Wire Analog or HART Control Circuits
• Right Angle Male Connectors
• NEMA 1, 3, 4, 6P and IEC IP 67
Protection
Housing Style
Part Number
P-CSWM ..
Cable
P-CSWM 12-960-*
ITC/PLTC PVC Plum
8x22 AWG, 4 STP with GND
Foil/Drain (22)
105°C
250 V, 4 A
10mm OD
Cable #RF50960-*M†
P-CSWM 12-229-*
ITC-Exposed Run/Direct
Burial/PLTC PVC Plum
8x22 AWG, 4 STP with GND
Foil/Drain (22)
105°C
250 V, 4 A
9.6mm OD
Cable #RF51229-*M†
P-CSWM 12-415-*
CSA CIC/CMX-Outdoor-CM
UL ITC/PLTC PUR Plum
8x22 AWG, 4 STP with GND
Foil/Drain (22)
105°C
250 V, 4 A
9.6 mm OD
Cable #RF5145-*M†
**P-CSWML .. (for Class I, Division
P-CSWM 19-959-*
2 applications)
ITC/PLTC PVC Plum
16x22 AWG, 8 STP with GND
Foil/Drain (22)
105°C
150 V, 2 A
12mm OD
Cable #RF50959-*M†
P-CSWM 19-230-*
ITC-Exposed Run/Direct
Burial/PLTC PVC Plum
16x22 AWG, 8 STP with GND
Foil/Drain (22)
105°C
150 V, 2 A
12.7mm OD
Cable #RF51230-*M†
P-CSWM 19-416-*
CSA CIC/CMX-Outdoor-CM
UL ITC/PLTC PUR Plum
16x22 AWG, 8 STP with GND
Foil/Drain (22)
105°C
150 V, 2 A
12.5 mm OD
Cable #RF5146-*M†
Application
Pinout
1. WH/BK
2. BK/WH
3. WH/GN
4. GN/WH
5. WH/RD
6. RD/WH
7. WH/OG
8. OG/WH
9. N/C
10. N/C
11. Drain
12. GN/YE
1. WH/BK
2. BK/WH
3. WH/GN
4. GN/WH
5. WH/RD
6. Drain
7. RD/WH
8. WH/OG
9. OG/WH
10. WH/BU
11. BU/WH
12. GN/YE
13. WH/BN
14. BN/WH
15. WH/YE
16. YE/WH
17. WH/VT
18. VT/WH
19. N/C
Analog or HART
control circuits in
Class I, Division 2
hazardous
locations** or
unclassified
locations.
* Length in meters. Standard cable length is 5 meters. Consult factory for other lengths.
Standard coupling nut material is nickel plated brass "P-CSWM(L).."; "P-CSWM(T)V.." indicates 316 stainless steel.
†
See pages K236 - K244 for reelfast ® cable information.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K88
TURCK
Process Wiring Products
multifast ® Home Run Cordsets, 2-Wire Analog or HART Control Circuits
• Straight Female Connectors
• IEC IP 67 Protection
Housing Style
P-CKM ..
Part Number
P-CKM 12-978-*
P-CKM 19-977-*
Cable
ITC/PLTC PVC Blue
8x22 AWG, 4 STP with GND
Foil/Drain (22)
105°C
10 mm OD
250 V, 4 A
Cable #RF50978-*M†
ITC/PLTC PVC Plum
16x22 AWG, 8 STP with GND
Foil/Drain (22)
105°C
12 mm OD
150 V, 2 A
Cable #RF50977-*M†
Application
Multiple 2-wire
Intrinsically Safe
analog or HART
control circuits in
Class I, Division 1
hazardous
locations.
Pinout
1. WH/BK
2. BK/WH
3. WH/GN
4. GN/WH
5. WH/RD
6. RD/WH
7. WH/OG
8. OG/WH
9. N/C
10. N/C
11. Drain
12. GN/YE
1. WH/BK
2. BK/WH
3. WH/GN
4. GN/WH
5. WH/RD
6. Drain
7. RD/WH
8. WH/OG
9. OG/WH
10. WH/BU
11. BU/WH
12. GN/YE
13. WH/BN
14. BN/WH
15. WH/YE
16. YE/WH
17. WH/VT
18. VT/WH
19. N/C
* Length in meters. Standard cable length is 5 meters. Consult factory for other lengths.
Standard coupling nut material is nickel plated brass "P-CKWM.."; "P-CKWMV.." indicates 316 stainless steel.
†
See pages K236 - K244 for reelfast ® cable information.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
K89
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
multifast ® Home Run Cordsets, 2-Wire Analog or HART Control Circuits
• Straight Male Connectors
• IEC IP 67 Protection
Housing Style
P-CSM ..
Part Number
P-CSM 12-978-*
P-CSM 19-977-*
Cable
ITC/PLTC PVC Blue
8x22 AWG, 4 STP with GND
Foil/Drain (22)
105°C
10 mm OD
250 V, 4 A
Cable #RF50978-*M†
ITC/PLTC PVC Plum
16x22 AWG, 8 STP with GND
Foil/Drain (22)
105°C
12 mm OD
150 V, 2 A
Cable #RF50977-*M†
Application
Multiple 2-wire
Intrinsically Safe
Analog or HART
control circuits in
Class I, Division 1
hazardous
locations.
Pinout
1. WH/BK
2. BK/WH
3. WH/GN
4. GN/WH
5. WH/RD
6. RD/WH
7. WH/OG
8. OG/WH
9. N/C
10. N/C
11. Drain
12. GN/YE
1. WH/BK
2. BK/WH
3. WH/GN
4. GN/WH
5. WH/RD
6. Drain
7. RD/WH
8. WH/OG
9. OG/WH
10. WH/BU
11. BU/WH
12. GN/YE
13. WH/BN
14. BN/WH
15. WH/YE
16. YE/WH
17. WH/VT
18. VT/WH
19. N/C
* Length in meters. Standard cable length is 5 meters. Consult factory for other lengths.
Standard coupling nut material is nickel plated brass "P-CSWM.."; "P-CSWMV.." indicates 316 stainless steel.
†
See pages K236 - K244 for reelfast ® cable information.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K90
TURCK
Process Wiring Products
multifast ® Home Run Cordsets, 2-Wire Analog or HART Control Circuits
• Right Angle Female Connectors
• IEC IP 67 Protection
Housing Style
P-CKWM ..
Part Number
P-CKWM 12-978-*
P-CKWM 19-977-*
Cable
ITC/PLTC PVC Blue
8x22 AWG, 4 STP with GND
Foil/Drain (22)
105°C
10 mm OD
250 V, 4 A
Cable #RF50978-*M†
ITC/PLTC PVC Plum
16x22 AWG, 8 STP with GND
Foil/Drain (22)
105°C
12 mm OD
150 V, 2 A
Cable #RF50977-*M†
Application
Multiple 2-wire
Intrinsically Safe
Analog or HART
control circuits in
Class I, Division 1
hazardous
locations.
Pinout
1. WH/BK
2. BK/WH
3. WH/GN
4. GN/WH
5. WH/RD
6. RD/WH
7. WH/OG
8. OG/WH
9. N/C
10. N/C
11. Drain
12. GN/YE
1. WH/BK
2. BK/WH
3. WH/GN
4. GN/WH
5. WH/RD
6. Drain
7. RD/WH
8. WH/OG
9. OG/WH
10. WH/BU
11. BU/WH
12. GN/YE
13. WH/BN
14. BN/WH
15. WH/YE
16. YE/WH
17. WH/VT
18. VT/WH
19. N/C
* Length in meters. Standard cable length is 5 meters. Consult factory for other lengths.
Standard coupling nut material is nickel plated brass "P-CKWM.."; "P-CKWMV.." indicates 316 stainless steel.
†
See pages K236 - K244 for reelfast ® cable information.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
K91
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
multifast ® Home Run Cordsets, 2-Wire Analog or HART Control Circuits
• Right Angle Male Connectors
• IEC IP 67 Protection
Housing Style
Part Number
P-CSWM ..
P-CSWM 12-978-*
P-CSWM 19-977-*
Cable
ITC/PLTC PVC Blue
8x22 AWG, 4 STP with GND
Foil/Drain (22)
105°C
10 mm OD
250 V, 4 A
Cable #RF50978-*M†
ITC/PLTC PVC Plum
16x22 AWG, 8 STP with GND
Foil/Drain (22)
105°C
12 mm OD
150 V, 2 A
Cable #RF50977-*M†
Application
Multiple 2-wire
Intrinsically Safe
Analog or HART
control circuits in
Class I, Division 1
hazardous
locations.
Pinout
1. WH/BK
2. BK/WH
3. WH/GN
4. GN/WH
5. WH/RD
6. RD/WH
7. WH/OG
8. OG/WH
9. N/C
10. N/C
11. Drain
12. GN/YE
1. WH/BK
2. BK/WH
3. WH/GN
4. GN/WH
5. WH/RD
6. Drain
7. RD/WH
8. WH/OG
9. OG/WH
10. WH/BU
11. BU/WH
12. GN/YE
13. WH/BN
14. BN/WH
15. WH/YE
16. YE/WH
17. WH/VT
18. VT/WH
19. N/C
* Length in meters. Standard cable length is 5 meters. Consult factory for other lengths.
Standard coupling nut material is nickel plated brass "P-CSWM.."; "P-CSWMV.." indicates 316 stainless steel.
†
See pages K236 - K244 for reelfast ® cable information.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K92
TURCK
Process Wiring Products
multifast ® Home Run Receptacles with Cable, 2-Wire Analog or HART Control Circuits
• Female Receptacles
• NEMA 1, 3, 4, 6P and IEC IP 67
Protection
Housing Style
Part Number
P-CKFL 12-960-*
P-CKFL ..
P-CKFL 12-229-*
Cable
Application
ITC/PLTC PVC Plum
8x22 AWG, 4 STP with GND
Foil/Drain (22)
105°C
250 V, 4 A
10 mm OD
Cable #RF50960-*M†
ITC-Exposed Run/Direct
Burial/PLTC PVC Plum
8x22 AWG, 4 STP with GND
Foil/Drain (22)
105°C
250 V, 4 A
9.6 mm OD
Cable #RF51229-*M†
P-CKFL 19-959-*
ITC/PLTC PVC Plum
16x22 AWG, 8 STP with GND
Foil/Drain (22)
105°C
150 V, 2 A
12mm OD
Cable #RF50959-*M†
P-CKFL 19-230-*
ITC-Exposed Run/Direct
Burial/PLTC PVC Plum
16x22 AWG, 8 STP with GND
Foil/Drain (22)
105°C
150 V, 2 A
12.7 mm OD
Cable #RF51230-*M†
Analog or HART
control circuits in
Class I, Division 2
hazardous
locations** or
unclassified
locations.
Pinout
1. WH/BK
2. BK/WH
3. WH/GN
4. GN/WH
5. WH/RD
6. RD/WH
7. WH/OG
8. OG/WH
9. N/C
10. N/C
11. Drain
12. GN/YE
1. WH/BK
2. BK/WH
3. WH/GN
4. GN/WH
5. WH/RD
6. Drain
7. RD/WH
8. WH/OG
9. OG/WH
10. WH/BU
11. BU/WH
12. GN/YE
13. WH/BN
14. BN/WH
15. WH/YE
16. YE/WH
17. WH/VT
18. VT/WH
19. N/C
* Length in meters. Standard cable length is 0.5 meters. Consult factory for other lengths.
Standard housing material is nickel plated brass "P-CKFL.."; "P-CKFLV.." indicates 316 stainless steel.
** Use with "T" or "L" cordsets for Class I, Division 2 applications.
†
See pages K236 - K244 for reelfast ® cable information.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
Dimensions
K93
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
multifast ® Home Run Receptacles with Cable, 2-Wire Analog or HART Control Circuits
• Male Receptacles
• NEMA 1, 3, 4, 6P and IEC IP 67
Protection
Housing Style
Part Number
P-CSFL 12-960-*
P-CSFL ..
P-CSFL 12-229-*
Cable
Application
ITC/PLTC PVC Plum
8x22 AWG, 4 STP with GND
Foil/Drain (22)
105°C
250 V, 4 A
10 mm OD
Cable #RF50960-*M†
ITC-Exposed Run/Direct
Burial/PLTC PVC Plum
8x22 AWG, 4 STP with GND
Foil/Drain (22)
105°C
250 V, 4 A
9.6 mm OD
Cable #RF51229-*M†
P-CSFL 19-959-*
ITC/PLTC PVC Plum
16x22 AWG, 8 STP with GND
Foil/Drain (22)
105°C
150 V, 2 A
12 mm OD
Cable #RF50959-*M†
P-CSFL 19-230-*
ITC-Exposed Run/Direct
Burial/PLTC PVC Plum
16x22 AWG, 8 STP with GND
Foil/Drain (22)
105°C
150 V, 2 A
12.7 mm OD
Cable #RF51230-*M†
Analog or HART
control circuits in
Class I, Division 2
hazardous
locations** or
unclassified
locations.
Pinout
1. WH/BK
2. BK/WH
3. WH/GN
4. GN/WH
5. WH/RD
6. RD/WH
7. WH/OG
8. OG/WH
9. N/C
10. N/C
11. Drain
12. GN/YE
1. WH/BK
2. BK/WH
3. WH/GN
4. GN/WH
5. WH/RD
6. Drain
7. RD/WH
8. WH/OG
9. OG/WH
10. WH/BU
11. BU/WH
12. GN/YE
13. WH/BN
14. BN/WH
15. WH/YE
16. YE/WH
17. WH/VT
18. VT/WH
19. N/C
* Length in meters. Standard cable length is 0.5 meters. Consult factory for other lengths.
Standard housing material is nickel plated brass "P-CSFL.."; "P-CSFLV.." indicates 316 stainless steel.
** Use with "T" or "L" cordsets for Class I, Division 2 applications.
†
See pages K236 - K244 for reelfast ® cable information.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
Dimensions
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K94
TURCK
Process Wiring Products
multifast ® Home Run Receptacles with Leads, 2-Wire Analog or HART Control Circuits
• Female Receptacles
• IEC IP 67 Protection
Housing Style
P-CKFL ..
Part Number
P-CKFL 12-*
P-CKFL 19-*
Lead Specs
Features
UL, CSA
10x22 AWG
105°C
300 V, 6 A
UL, CSA
18x22 AWG
105°C
150 V, 2 A
Multiple 2-wire analog or
HART control circuits in
hazardous locations or
unclassified locations.
Pinout
1. WH/BK
2. BK/WH
3. WH/GN
4. GN/WH
5. WH/RD
6. RD/WH
7. WH/OG
8. OG/WH
9. N/C
10. N/C
11. GY
12. GN/YE
1. WH/BK
2. BK/WH
3. WH/GN
4. GN/WH
5. WH/RD
6. GY
7. RD/WH
8. WH/OG
9. OG/WH
10. WH/BU
11. BU/WH
12. GN/YE
13. WH/BN
14. BN/WH
15. WH/YE
16. YE/WH
17. WH/VT
18. VT/WH
19. N/C
* Length in meters. Standard lead length is 1 meter. Consult factory for other lengths.
Standard housing material is nickel plated brass "P-CKFL.."; "P-CKFLV.." indicates 316 stainless steel.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
Dimensions
K95
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
multifast ® Home Run Receptacles with Leads, 2-Wire Analog or HART Control Circuits
• Male Receptacles
• IEC IP 67 Protection
Housing Style
Part Number
P-CSFL ..
P-CSFL 12-*
P-CSFL 19-*
Lead Specs
Features
UL, CSA
10x22 AWG
105°C
300 V, 6 A
UL, CSA
18x22 AWG
105°C
150 V, 2 A
Multiple 2-wire analog or
HART control circuits in
hazardous locations or
unclassified locations.
Pinout
1. WH/BK
2. BK/WH
3. WH/GN
4. GN/WH
5. WH/RD
6. RD/WH
7. WH/OG
8. OG/WH
9. N/C
10. N/C
11. GY
12. GN/YE
1. WH/BK
2. BK/WH
3. WH/GN
4. GN/WH
5. WH/RD
6. GY
7. RD/WH
8. WH/OG
9. OG/WH
10. WH/BU
11. BU/WH
12. GN/YE
13. WH/BN
14. BN/WH
15. WH/YE
16. YE/WH
17. WH/VT
18. VT/WH
19. N/C
* Length in meters. Standard lead length is 1 meter. Consult factory for other lengths.
Standard housing material is nickel plated brass "P-CSFL.."; "P-CSFLV.." indicates 316 stainless steel.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
Dimensions
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K96
TURCK
Process Wiring Products
Additional Analog or Discrete Control Circuits Selection Guide
M12 eurofast ® Thread
Drop Cordsets
Receptacles with Cable
Receptacles with Leads
Junction Boxes
Pages
K101 - K104
K105 - K108
K109 - K112
K113 - K116
7/8", 1, & 1-1/8"
minifast ® Thread
Drop
Cordsets
Receptacles
with Cable
Receptacles
with Leads
Explosionproof
Receptacles
"Y" Fitting
Receptacles
Junction Boxes
Pages
K121 - K128
K129 - K142
K144 - K160
K161 - K168
K169 - K170
K171 - K172
M23 multifast ® Thread
Home Run Cordsets
Pages
K173 - K174
K97
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
eurofast ® Cordset Part Number Key, Additional Analog or Discrete Control Circuits
Part Number Keys are to assist in IDENTIFICATION ONLY. Consult factory for catalog items not identified.
P - R K G V
5.1 T - 108 - 2 - R S G V
5.1T
P = Process Cordset
eurofast
R = Straight
Insertion Point of Extension Cable and 2nd Prefix*
W = Right Angle
* Female Connector Listed 1st, Male Connector 2nd
Gender
Example: P-RKGV 5.1T-108-2-RSGV 5.1T
K = Female Connector
S = Male Connector
Length in Meters
Plug Body Style
E = Large Plug Body, Right Angle
Number of Wires / AWG / Color Codes / Cable Type
G = Large, Robust Plug Body
5.1T-108 = 4x18 AWG, BU, BN, GN/YE, BK, ITC/PLTC PVC
Coupling Nut Options
4.4T-698 = 4x22 AWG, BU, BN, WH, BK, ITC/PLTC PVC
5.3T-095 = 3x18 AWG, BN, WH, BU, BK, ITC/PLTC PUR
(Blank) = Nickle Plated Brass
V = 316 Stainless Steel
T = T Barb Fitting
A = Armored Cable
Single Ended Example:
P - R K G V
5.1 T - 108 - 2
RKGV ..
Extension Example:
P - R K G
5.1 T - 108 - 2 - R S G
5.1 T
RKG .. - RSG ..
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K98
TURCK
Process Wiring Products
eurofast ® Cordset Part Number Key, Additional Analog or Discrete Control Circuits
Other Extension Examples:
P - R K G
5.1 T - 108 - 2 - W S E
5.1 T
P - W K E
5.1 T - 108 - 2 - R S G
5.1 T
P - W K E
5.1 T - 108 - 2 - W S E
5.1 T
RKG .. - WSE ..
WKE .. - RSG ..
WKE .. - WSE ..
Note: Hybrid connector extensions also available. Consult factory.
K99
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
eurofast ® Receptacle w/Cable Part Number Key, Additional Analog or Discrete Control Circuits
Part Number Keys are to assist in IDENTIFICATION ONLY. Consult factory for catalog items not identified.
P - F K
V
5.1-108 - 2 - /14.5/NPT
P = Process Receptacle
Designator for Receptacle
Thread Type
Gender
/14.5/NPT = 1/2-14NPT Threads
K = Female Connector
/14.75/NPT = 3/4-14NPT Threads
S = Male Connector
/M20 = M20x1.5 Threads
Housing Style
Length in Meters
(Blank) = Front Mount
Number of Wires / AWG / Color Codes / Cable Type
Housing Material
5.1-108 = 4x18 AWG, BU, BN, GN/YE, BK, ITC/PLTC PVC
(Blank) = Nickel Plated Brass
4.4-698 = 4x22 AWG, BU, BN, WH, BK, ITC/PLTC PVC
V = 316 Stainless Steel
5.3-095 = 3x18 AWG, BN, WH, BU, BK, ITC/PLTC PUR
eurofast Receptacle with Leads Part Number Key, Additional Analog or Discrete Control Circuits
Part Number Keys are to assist in IDENTIFICATION ONLY. Consult factory for catalog items not identified.
P - F K
V
4 - 0.5 - /14.5/NPT
P = Process Receptacle
Designator for Receptacle
Thread Type
Gender
/14.5/NPT = 1/2-14NPT Threads
K = Female Connector
/14.75/NPT = 3/4-14NPT Threads
/M20 = M20x1.5 Threads
S = Male Connector
Length in Meters
Housing Style
(Blank) = Front Mount
P = Back Panel Mount
Number of Wires
Housing Material
4.4 = 4
(Blank) = Nickel Plated Brass
V = 316 Stainless Steel
5.1 = 4
5.3 = 4
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K100
TURCK
Process Wiring Products
eurofast ® Drop Cordsets, Additional Analog or Discrete Control Circuits
• Straight Female Connectors
• IEC IP 68 Protection
• 250 V, 4 A (Use as ITC Limited to
150 V, 3 A for 22 AWG Conductors)
Housing Style
P-RKG ..
Part Number
Cable
Features
Pinout
P-RKG 4.4T-698-*
ITC/PLTC PVC Grey
4x22 AWG
105 C
5.2 mm OD
Cable #RF50698-*M†
4-wire RTD control circuits
in Class I, Division 2
hazardous locations** or
unclassified locations.
1. BU
2. BN
3. WH
4. BK
P-RKG 5.1T-108-*
ITC/PLTC PVC Plum
4x18 AWG, 1 Triad with GND
Foil/Drain (20)
105°C
8.1 mm OD
Cable #RF51108-*M†
Discrete or Analog 3-wire
circuits in Class I, Division
2 hazardous locations** or
unclassified locations.
1. BU
2. BN
3. Drain
4. BK
5. GN/YE
P-RKG 5.3T-095-*
ITC/PLTC PUR Black
4x22 AWG
Foil/Drain (22)
105 C
6.8 mm OD
Cable #RF51095-*M†
4-wire RTD control circuits
in Class I, Division 2
hazardous locations** or
unclassified locations.
1. BN
2. WH
3. BU
4. BK
5. Drain
* Length in meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.
Standard coupling nut material is nickel plated brass “P-RKG ..”; “P-RKGV ..” indicates 316 stainless steel.
** Use with lokfast eurofast guards (part number: LOCK-EURO-G) in Class I, Division 2 applications.
†
See pages K236 - K244 for reelfast ® cable information.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
K101
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
eurofast ® Drop Cordsets, Additional Analog or Discrete Control Circuits
• Straight Male Connectors
• IEC IP 68 Protection
• 250 V, 4 A (Use as ITC Limited to
150 V, 3 A for 22 AWG Conductors)
Housing Style
P-RSG ..
Part Number
Cable
Features
Pinout
P-RSG 4.4T-698-*
ITC/PLTC PVC Grey
4x22 AWG
105 C
5.2 mm OD
Cable #RF50698-*M†
4-wire RTD control circuits
in Class I, Division 2
hazardous locations** or
unclassified locations.
1. BU
2. BN
3. WH
4. BK
P-RSG 5.1T-108-*
ITC/PLTC PVC Plum
4x18 AWG, 1 Triad with GND
Foil/Drain (20)
105°C
8.1 mm OD
Cable #RF51108-*M†
Discrete or Analog 3-wire
circuits in Class I, Division
2 hazardous locations** or
unclassified locations.
1. BU
2. BN
3. Drain
4. BK
5. GN/YE
P-RSG 5.3T-095-*
ITC/PLTC PUR Black
4x22 AWG
Foil/Drain (22)
105 C
6.8 mm OD
Cable #RF51095-*M†
4-wire RTD control circuits
in Class I, Division 2
hazardous locations** or
unclassified locations.
1. BN
2. WH
3. BU
4. BK
5. Drain
* Length in meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.
Standard coupling nut material is nickel plated brass “P-RSG ..”; “P-RSGV ..” indicates 316 stainless steel.
** Use with lokfast eurofast guards (part number: LOCK-EURO-G) in Class I, Division 2 applications.
†
See pages K236 - K244 for reelfast ® cable information.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K102
TURCK
Process Wiring Products
eurofast ® Drop Cordsets, Additional Analog or Discrete Control Circuits
• Right Angle Female Connectors
• IEC IP 68 Protection
• 250 V, 4 A (Use as ITC Limited to
150 V, 3 A for 22 AWG Conductors)
Housing Style
P-WKE ..
Part Number
Cable
Features
Pinout
P-WKE 4.4T-698-*
ITC/PLTC PVC Grey
4x22 AWG
105 C
5.2 mm OD
Cable #RF50698-*M†
4-wire RTD control
circuits in Class I,
Division 2 hazardous
locations** or
unclassified locations.
1. BU
2. BN
3. WH
4. BK
P-WKE 5.1T-108-*
ITC/PLTC PVC Plum
4x18 AWG, 1 Triad with GND
Foil/Drain (20)
105°C
8.1 mm OD
Cable #RF51108-*M†
Discrete or Analog
3-wire circuits in Class I,
Division 2 hazardous
locations** or
unclassified locations.
1. BU
2. BN
3. Drain
4. BK
5. GN/YE
P-WKE 5.3T-095-*
ITC/PLTC PUR Black
4x22 AWG
Foil/Drain (22)
105 C
6.8 mm OD
Cable #RF51095-*M†
4-wire RTD control
circuits in Class I,
Division 2 hazardous
locations** or
unclassified locations.
1. BN
2. WH
3. BU
4. BK
5. Drain
* Length in meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.
Standard coupling nut material is nickel plated brass “P-WKE ..”; “P-WKEV ..” indicates 316 stainless steel.
†
See pages K236 - K244 for reelfast ® cable information.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
K103
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
eurofast ® Drop Cordsets, Additional Analog or Discrete Control Circuits
• Right Angle Male Connectors
• IEC IP 68 Protection
• 250 V, 4 A (Use as ITC Limited to
150 V, 3 A for 22 AWG Conductors)
Housing Style
Part Number
P-WSE ..
Cable
Features
Pinout
P-WSE 4.4T-698-*
ITC/PLTC PVC Grey
4x22 AWG
105 C
5.2 mm OD
Cable #RF50698-*M†
4-wire RTD control
circuits in Class I,
Division 2 hazardous
locations** or
unclassified locations.
1. BU
2. BN
3. WH
4. BK
P-WSE 5.1T-108-*
ITC/PLTC PVC Plum
4x18 AWG, 1 Triad with GND
Foil/Drain (20)
105°C
8.1 mm OD
Cable #RF51108-*M†
Discrete or Analog 3-wire
circuits in Class I,
Division 2 hazardous
locations** or
unclassified locations.
1. BU
2. BN
3. Drain
4. BK
5. GN/YE
P-WSE 5.3T-095-*
ITC/PLTC PUR Black
4x22 AWG
Foil/Drain (22)
105 C
6.8 mm OD
Cable #RF51095-*M†
4-wire RTD control
circuits in Class I,
Division 2 hazardous
locations** or
unclassified locations.
1. BN
2. WH
3. BU
4. BK
5. Drain
* Length in meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.
Standard coupling nut material is nickel plated brass “P-WSE ..”; “P-WSEV ..” indicates 316 stainless steel.
†
See pages K236 - K244 for reelfast ® cable information.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K104
TURCK
Process Wiring Products
eurofast ® Receptacles with Cable, Additional Analog or Discrete Control Circuits
1
P-FK .. 14.5/NPT
2
Pages K106 - K108
P-FS .. 14.5/NPT
3
P-FK .. 14.75/NPT
4
Pages K106 - K108
P-FS .. 14.75/NPT
5
P-FK .. M20
K105
Pages K106 - K108
Pages K106 - K108
6
Pages K106 - K108
P-FS .. M20
Pages K106 - K108
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
eurofast ® Receptacles with Cable, Additional Analog or Discrete Control Circuits
• Male and Female Receptacles
• IEC IP 68 Protection
• 250 V, 4 A
(Use as ITC Limited to 150 V)
Housing Style
Part Number
Cable
Application
Pinout
1
P-FK 5.1-108-*/14.5/NPT
Discrete or Analog
3-wire circuits in
Class I, Division 2
hazardous
locations or
unclassified
locations.
1/2-14NPT Threads.
2
P-FS 5.1-108-*/14.5/NPT
3
P-FK 5.1-108-*/14.75/NPT
4
P-FS 5.1-108-*/14.75/NPT
ITC/PLTC PVC Plum
4x18 AWG, 1 Shielded Triad
with GND
Foil/Drain (20)
105°C
8.1 mm OD
Cable #RF51108-*M†
Discrete or Analog
3-wire circuits in
Class I, Division 2
hazardous
locations or
unclassified
locations.
3/4-14NPT Threads.
1. BU
2. BN
3. Drain
4. BK
5. GN/YE
5
P-FK 5.1-108-*/M20
6
P-FS 5.1-108-*/M20
Discrete or Analog
3-wire circuits in
Class I, Division 2
hazardous
locations or
unclassified
locations.
M20 Threads.
See page K105 for dimensional drawings.
* Length in meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.
Standard housing material is nickel plated brass “P-FK(S)..”; “P-FK(S)V..” indicates 316 stainless steel.
Receptacles recommend 13/16" (21.0 mm) hole for panel mounting. 1/2-14NPT and M20. 1-1/16" (27.0 mm) for 3/4-14NPT.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
†
See pages K236 - K244 for reelfast ® cable information.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K106
TURCK
Process Wiring Products
eurofast ® Receptacles with Cable, Additional Analog or Discrete Control Circuits
• Male and Female Receptacles
• IEC IP 68 Protection
• 250 V, 4 A
(Use as ITC Limited to 150 V)
Housing Style
Part Number
Cable
Application
Pinout
1
P-FK 4.4-698-*/14.5/NPT
4-wire RTD control
circuits in Class I,
Division 2
hazardous
locations or
unclassified
locations.
1/2-14NPT Threads.
2
P-FS 4.4-698-*/14.5/NPT
3
P-FK 4.4-698-*/14.75/NPT
ITC/PLTC PVC Grey
4x22 AWG
105 C
5.2 mm OD
Cable #RF50698-*M†
4
P-FS 4.4-698-*/14.75/NPT
4-wire RTD control
circuits in Class I,
Division 2
hazardous
locations or
unclassified
locations.
3/4-14NPT Threads.
1. BU
2. BN
3. WH
4. BK
5
P-FK 4.4-698-*/M20
6
P-FS 4.4-698-*/M20
4-wire RTD control
circuits in Class I,
Division 2
hazardous
locations or
unclassified
locations.
M20 Threads.
See page K105 for dimensional drawings.
* Length in meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.
Standard housing material is nickel plated brass “P-FK(S)..”; “P-FK(S)V..” indicates 316 stainless steel.
Receptacles recommend 13/16" (21.0 mm) hole for panel mounting. 1/2-14NPT and M20. 1-1/16" (27.0 mm) for 3/4-14NPT.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
†
See pages K236 - K244 for reelfast ® cable information.
K107
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
eurofast ® Receptacles with Cable, Additional Analog or Discrete Control Circuits
• Male and Female Receptacles
• IEC IP 68 Protection
• 250 V, 4 A
(Use as ITC Limited to 150 V)
Housing Style
Part Number
Cable
Application
Pinout
1
P-FK 5.3-095-*/14.5/NPT
4-wire RTD control
circuits in Class I,
Division 2
hazardous
locations or
unclassified
locations.
1/2-14NPT Threads.
2
P-FS 5.3-095-*/14.5/NPT
3
P-FK 5.3-095-*/14.75/NPT
ITC/PLTC PUR Black
4x22 AWG
Foil/Drain (22)
105 C
6.8 mm OD
Cable #RF51095-*M†
4
P-FS 5.3-095-*/14.75/NPT
4-wire RTD control
circuits in Class I,
Division 2
hazardous
locations or
unclassified
locations.
3/4-14NPT Threads.
1. BU
2. WH
3. BU
4. BK
5. Drain
5
P-FK 5.3-095-*/M20
6
P-FS 5.3-095-*/M20
4-wire RTD control
circuits in Class I,
Division 2
hazardous
locations or
unclassified
locations.
M20 Threads.
See page K105 for dimensional drawings.
* Length in meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.
Standard housing material is nickel plated brass “P-FK(S)..”; “P-FK(S)V..” indicates 316 stainless steel.
Receptacles recommend 13/16" (21.0 mm) hole for panel mounting. 1/2-14NPT and M20. 1-1/16" (27.0 mm) for 3/4-14NPT.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
†
See pages K236 - K244 for reelfast ® cable information.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K108
TURCK
Process Wiring Products
eurofast ® Receptacles with Leads, Additional Analog or Discrete Control Circuits
1
P-FK .. 14.5/NPT
2
Pages K110 - K112
P-FS .. 14.5/NPT
3
P-FK .. 14.75/NPT
4
Pages K110 - K112
P-FS .. 14.75/NPT
5
P-FK .. M20
K109
Pages K110 - K112
Pages K110 - K112
6
Pages K110 - K112
P-FS .. M20
Pages K110 - K112
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
eurofast ® Receptacles with Leads, Additional Analog or Discrete Control Circuits
• Male and Female Receptacles
• IEC IP 68 Protection
• 250 V, 4 A
Housing Style
Part Number
Cable
Application
Pinout
1
P-FK 5.1-*/14.5/NPT
1/2-14NPT Threads
2
P-FS 5.1-*/14.5/NPT
3
P-FK 5.1-*/14.75/NPT
UL, CSA
4x18 AWG
105 C
4
3/4-14NPT Threads
1. BU
2. BN
3. N/C
4. BK
5. GN/YE
P-FS 5.1-*/14.75/NPT
5
P-FK 5.1-*/M20
M20 Threads
6
P-FS 5.1-*/M20
See page K109 for dimensional drawings.
* Length in meters. Standard lead length is 0.5 meters. Consult factory for other lengths.
Standard housing material is nickel plated brass “P-FK(S)..”; “P-FK(S)V..” indicates 316 stainless steel.
Receptacles recommend 13/16" (21.0 mm) hole for panel mounting. 1/2-14NPT and M20. 1-1/16" (27.0 mm) for 3/4-14NPT.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K110
TURCK
Process Wiring Products
eurofast ® Receptacles with Leads, Additional Analog or Discrete Control Circuits
• Male and Female Receptacles
• IEC IP 68 Protection
• 250 V, 4 A
Housing Style
Part Number
Cable
Application
Pinout
1
P-FK 4.4-*/14.5/NPT
1/2-14NPT Threads
2
P-FS 4.4-*/14.5/NPT
3
P-FK 4.4-*/14.75/NPT
UL, CSA
4x22 AWG
105°C
4
3/4-14NPT Threads
1. BU
2. BN
3. WH
4. BK
P-FS 4.4-*/14.75/NPT
5
P-FK 4.4-*/M20
M20 Threads
6
P-FS 4.4-*/M20
See page K109 for dimensional drawings.
* Length in meters. Standard lead length is 0.5 meters. Consult factory for other lengths.
Standard housing material is nickel plated brass “P-FK(S)..”; “P-FK(S)V..” indicates 316 stainless steel.
Receptacles recommend 13/16" (21.0 mm) hole for panel mounting. 1/2-14NPT and M20. 1-1/16" (27.0 mm) for 3/4-14NPT.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
K111
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
eurofast ® Receptacles with Leads, Additional Analog or Discrete Control Circuits
• Male and Female Receptacles
• IEC IP 68 Protection
• 250 V, 4 A
Housing Style
Part Number
Cable
Application
Pinout
1
P-FK 5.3-*/14.5/NPT
1/2-14NPT Threads
2
P-FS 5.3-*/14.5/NPT
3
P-FK 5.3-*/14.75/NPT
UL, CSA
4x22 AWG
105 C
4
3/4-14NPT Threads
1. BU
2. WH
3. BU
4. BK
5. N/C
P-FS 5.3-*/14.75/NPT
5
P-FK 5.3-*/M20
M20 Threads
6
P-FS 5.3-*/M20
See page K109 for dimensional drawings.
* Length in meters. Standard lead length is 0.5 meters. Consult factory for other lengths.
Standard housing material is nickel plated brass “P-FK(S)..”; “P-FK(S)V..” indicates 316 stainless steel.
Receptacles recommend 13/16" (21.0 mm) hole for panel mounting. 1/2-14NPT and M20. 1-1/16" (27.0 mm) for 3/4-14NPT.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K112
TURCK
Process Wiring Products
multibox ® eurofast ® Metal Junction Boxes w/Integral Home Run Cable
• Consolidation of Analog or Discrete Circuits in Hazardous Locations or Unclassified Locations
• Blue Jacket Color may be used as Identification of Intrinsically Safe Circuits
FM approved for installation in hazardous locations when installed per TURCK Control
Drawing QCF-00147 (www.turck.com/fmcd) using specified accessory equipment.
"/C" versions CSA certified for installation in hazardous locations when installed per TURCK
Control Drawing Ni-2.404(www.turck.com/fmcd) using certified accessory equipment.
4-port, 1 Analog Signal Per Port, Common Ground and Shield
Application
4-port cast
aluminum junction
box, eurofast port
connectors, integral
home-run cable
Specifications
Home-run cable with 4/22
AWG shielded twisted pairs,
each with 22 AWG drain†,
plus overall shield with 22
AWG drain and 18 AWG
overall ground, 10.0 mm OD
Pinout
Port, Pin
Port 1, Pin 1
Port 1, Pin 2
Port 2, Pin 1
Port 2, Pin 2
Port 3, Pin 1
Wire Color
WH/BK
BK/WH
WH/GN
GN/WH
WH/RD
Port, Pin
Port 3, Pin 2
Port 4, Pin 1
Port 4, Pin 2
Ports 1-4, Pin 3
Ports 1-4, Pin 4
Nickel Plated Brass
Wire Color
RD/WH
WH/OG
OG/WH
Drain
GN/YE
Stainless Steel
P-VBM 40-978-*
P-VBMV 40-978-*
P-VBM 40-978-*/C
P-VBMV 40-978-*/C
8-port, 1 Analog Signal Per Port, Common Ground and Shield
Application
8-port cast
aluminum junction
box, eurofast port
connectors, integral
home-run cable
Specifications
Home-run cable with 8/22
AWG shielded twisted pairs,
each with 22 AWG drain†,
plus overall shield with 22
AWG drain and 18 AWG
overall ground, 12.0 mm OD
Pinout
Port, Pin
Port 1, Pin 1
Port 1, Pin 2
Port 2, Pin 1
Port 2, Pin 2
Port 3, Pin 1
Port 3, Pin 2
Port 4, Pin 1
Port 4, Pin 2
Port 5, Pin 1
Port 5, Pin 2
Wire Color
WH/BK
BK/WH
WH/GN
GN/WH
WH/RD
RD/WH
WH/OG
OG/WH
WH/BU
BU/WH
Port, Pin
Port 6, Pin 1
Port 6, Pin 2
Port 7, Pin 1
Port 7, Pin 2
Port 8, Pin 1
Port 8, Pin 2
Ports 1-8, Pin 3
Ports 1-8, Pin 4
Nickel Plated Brass
Wire Color
WH/BN
BN/WH
WH/YE
YE/WH
WH/VT
VT/WH
Drain
GN/YE
Stainless Steel
P-VBM 80-977-*
P-VBMV 80-977-*
P-VBM 80-977-*/C
P-VBMV 80-977-*/C
* Length in meters.
†
Each circuit has dedicated drain wire not connected in the junction box.
Wiring Diagrams
4-Port
K113
8-Port
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
Specifications
Housing:
Connectors
Temperature:
Contacts:
Protection:
Cable:
Electrical Rating:
Die-cast aluminum alloy.
Nickel plated brass or 316 stainless steel housings (see table), oil resistant PUR contact carrier.
-30° to +80°C (-22° to +176°F).
Gold plated brass.
IP 68.
Blue PVC jacket, UL ITC/PLTC/AWM, CSA CMX-Outdoor/CMG/AWM FT4, 300 V, 105°C.
Standard Version: 250 V, 4 A per conductor (use as ITC is limited to 150 V, 3 A for 22 AWG conductors).
"/C" Versions:
30 V, 600 mA
Dimensions
4-Port
8-Port
Notes:
1. Clearance hole for 1/4-20 mounting screws (2 not included).
Pinouts
Female
4-Pin
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K114
TURCK
Process Wiring Products
multibox ® eurofast ® Metal Junction Boxes
• Consolidation of Analog or Discrete Circuits in Hazardous Locations** or Unclassified
Locations
FM approved for installation in hazardous locations when installed per TURCK Control
Drawing QCF-00147 (www.turck.com/fmcd) using specified accessory equipment.
"/C" versions CSA certified for installation in hazardous locations when installed per TURCK
Control Drawing Ni-2.404(www.turck.com/fmcd) using certified accessory equipment.
8-port, Common Ground and Shield
Application
8-port cast aluminum
junction box, eurofast
port connectors,
multifast home-run
connector, 1 discrete
signal per port
Specifications
12-pin multifast connector
Pinout
Port, Pin
V+
NC
VPort 1, Pin 4
Port 2, Pin 4
Port 3, Pin 4
Home-Run
1
2
3
4
5
6
Port, Pin
Port 4, Pin 4
Port 5, Pin 4
Port 6, Pin 4
Port 7, Pin 4
Port 8, Pin 4
Ports 1-8, Pin 5
Nickel Plated Brass
Home-Run
7
8
9
10
11
12
Stainless Steel
P-VBM 84-CS12
P-VBMV 84-CSV12
P-VBM 84-CS12/C
P-VBMV 84-CSV12/C
** Use with lokfast LOCK-EURO-G for port connectors in Class I, Division 2 applications and for mating Home-Run cable use "L" and "T" versions
See page K173 for mating home run cable.
Wiring Diagram
8-Port Diagram, 1 Discrete Signal Per Port
K115
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
Specifications
Housing:
Connectors
Temperature:
Contacts:
Protection:
Electrical Rating:
Die-cast aluminum alloy.
Nickel plated brass or 316 stainless steel housings (see table), oil resistant PUR contact carrier.
-30° to +80°C (-22° to +176°F).
Gold plated brass.
IP 67.
Standard Version: 150 V, 4 A per conductor.
"/C" Versions:
30 V, 600 mA
Dimensions
4-Port
Notes:
1. Clearance hole for 1/4-20 mounting screws (2 not included).
Pinouts
Female
Male
4-Pin eurofast ®
12-Pin multifast ®
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K116
TURCK
Process Wiring Products
minifast ® Cordset Part Number Key, Additional Analog or Discrete Control Circuits
Part Number Keys are to assist in IDENTIFICATION ONLY. Consult factory for catalog items not identified.
P - R S V
R K V
51 - 108 - 2
P = Process Cordset
Length in Meters
minifast
Number of Wires / AWG / Color Codes / Cable Type
R = Straight
51-108 = 4x18 AWG, AWG, BU, BN, GN/YE, BK, ITC/PLTC PVC
W = Right Angle
55-099 = 4x16 AWG, WH, BK, GN, RD, ITC/PLTC PVC
55-328 = 4x16 AWG, WH, BK, GN, RD, ITC/PLTC PVC
Gender
60-025 = 5x16 AWG, BU, BN, GN/YE, WH, BK, ITC/PLTC PVC
K = Female Connector, plus Threads
63-233 = 6x16 AWG, WH, RD, GN, OG, BK, BU, ITC-Exposed
Run/Direct Burial/PLTC PVC
S = Male Connector, plus Threads
Y = Male Connector, Female Threads
71-219 = 6x16 AWG, WH, BK, RD, OG, BU, GN, ITC/PLTC PVC
Coupling Nut Options
321-088 = 3x18 AWG, GN/YE, BN, BU, ITC/PLTC PVC
(Blank) = Nickel Plated Brass
33-187 = 3x18 AWG, GN, BK, WH, ITC/PLTC PVC
V = 316 Stainless Steel
442A-041 = 4x18 AWG, BK, WH, RD, GN, PVC Armor
71-329 = 6x16 AWG, WH, BK, RD, OG, BU, GN, ITC/PLTC PVC
52-972 = 5x18 AWG, BK, WH, GY, BN, BU, ITC/PLTC PVC
Insertion Point of Extension Cable and 2nd Prefix*
63-030 = 6x16 AWG, WH, RD, GN, OG, BK, BU, ITC/PLTC PVC
* Male Connector Listed 1st, Female Connector 2nd
66-318 = 5x18 AWG, BU, BN, GN/YE, WH, BK, ITC/PLTC PVC
Example: P-RSV RKV 51-108-2
Single Ended Example:
P - R S V
51- 108
- 2M
RSV ..
Extension Example:
P - R S V
R K V
51- 108
- 2M
RSV .. - RKV ..
K117
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
minifast ® Cordset Part Number Key, Additional Analog or Discrete Control Circuits
Other Extension Examples:
P - R S V
W K V
51 - 108 - 2M
P - W S V
R K V
51 - 108 - 2M
P - W S V
W K V
51 - 108 - 2M
RSV .. - WKV ..
WSV .. - RKV ..
WSV .. - WKV ..
Note: Hybrid connector extensions also available. Consult factory.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K118
TURCK
Process Wiring Products
minifast ® Receptacles with Cable Part Number Key, Additional Analog or Discrete Control Circuits
Part Number Keys are to assist in IDENTIFICATION ONLY. Consult factory for catalog items not identified.
P - R K F
P = Process Receptacle
V
51 - 108 - 2 - /14.5/NPT
Thread Type
/14.5/NPT = 1/2-14NPT Threads
Designator for Receptacle
/14.75/NPT = 3/4-14NPT Threads
/M20 = M20x1.5 Threads
Gender
Length in Meters
K = Female Connector
S = Male Connector
X = Female Connector, Male Threads
Number of Wires / AWG / Color Codes / Cable Type
51-108 = 4x18 AWG, AWG, BU, BN, GN/YE, BK, ITC/PLTC PVC
Housing Style
55-099 = 4x16 AWG, WH, BK, GN, RD, ITC/PLTC PVC
(Blank) = Front Mount
55-328 = 4x16 AWG, WH, BK, GN, RD, ITC/PLTC PVC
P = Back Panel Mount
60-025 = 5x16 AWG, BU, BN, GN/YE, WH, BK, ITC/PLTC PVC
Housing Material
63-233 = 6x16 AWG, WH, RD, GN, OG, BK, BU, ITC-Exposed Run/Direct
Burial/PLTC PVC
(Blank) = Nickel Plated Brass
71-219 = 6x16 AWG, WH, BK, RD, OG, BU, GN, ITC/PLTC PVC
V = 316 Stainless Steel
71-329 = 6x16 AWG, WH, BK, RD, OG, BU, GN, ITC/PLTC PVC
321-088 = 3x18 AWG, GN/YE, BN, BU, ITC/PLTC PVC
33-187 = 3x18 AWG, GN, BK, WH, ITC/PLTC PVC
442A-041 = 4x18 AWG, BK, WH, RD, GN, PVC Armor
52-972 = 5x18 AWG, BK, WH, GY, BN, BU, ITC/PLTC PVC
63-030 = 6x16 AWG, WH, RD, GN, OG, BK, BU, ITC/PLTC PVC
66-318 = 5x18 AWG, BU, BN, GN/YE, WH, BK, ITC/PLTC PVC
K119
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
minifast ® Receptacles with Leads Part Number Key, Additional Analog or Discrete Control Circuits
Part Number Keys are to assist in IDENTIFICATION ONLY. Consult factory for catalog items not identified.
P - R K F
V
44 - 0.2 - /14.5/NPT
P = Process Receptacle
Thread Type
(Blank) = 1/2-14NPSM Threads
Designator for Receptacle
/14.5/NPT = 1/2-14NPT Threads
/14.75/NPT = 3/4-14NPT Threads
/M20 = M20x1.5 Threads
Gender
K = Female Connector
Length in Meters
S = Male Connector
X = Female Connector, Male Threads
Number of Wires
Housing Style
44 = 4
(Blank) = Front Mount
442 = 4
P = Back Panel Mount
45 = 3
52 = 5
Housing Material
56 = 5
(Blank) = Nickel Plated Brass
60 = 5
V = 316 Stainless Steel
60D = 6 including drain
63 = 6
70 = 7
80 = 8
100 = 10
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K120
TURCK
Process Wiring Products
minifast ® Drop Cordsets, Additional Analog or Discrete Control Circuits
• Straight Female Connectors
• IEC IP 67 Protection
• 300 V, 9 A
(use as ITC limited to 150 V, 5 A)
FM tested to the cable
sealing requirements of
NEC Article 501-5(E)(2)
Housing Style
Part Number
P-RKM ..
Cable
Application
Pinouts
P-RKM 321-880-*M
ITC/PLTC PVC Yellow
3x18 AWG
105°C
7.2 mm OD
Cable #RF50880-*M†
P-RKM 33-187-*M
ITC/PLTC PVC Grey
3x18 AWG
105°C
7.2 mm OD
Cable #RF51187-*M†
P-RKM 442A-041-*M
ITC/PLTC ARMOR PVC Yellow
4x18 AWG
105°C
13.5 mm OD
Cable #RF51041-*M†
P-RKM 51-108-*M
ITC/PLTC PVC Plum
4x18 AWG, 1 Shielded Triad
with GND
Foil/Drain (20)
105°C
8.1 mm OD
Cable #RF51108-*M†
Discrete or Analog
3-wire circuits in
Class I, Division 2
hazardous
locations** or
unclassified locations.
1. BU
2. BN
3. GN/YE
4. Drain
5. BK
P-RKM 52-972-*M
ITC/PLTC PVC Grey
5x18 AWG
105°C
7.2 mm OD
Cable #RF50972-*M†
Discrete I/O Devices
in Class I, Division 2
Hazardous
Locations** or
Unclassified
Locations.
1. BK
2. WH
3. GY
4. BN
5. BU
P-RKM 55-099-*M
ITC/PLTC PVC Plum
4x16 AWG, 1 Shielded Triad
with GND
Foil/Drain (18)
105°C
10.4 mm OD
Cable #RF51099-*M†
P-RKM 55-328-*M
ITC/PLTC PVC Blue
4x16 AWG, 1 Triad with GND
Foil/Drain (18)
105°C
10.4 mm OD
Cable #RF51328-*M†
P-RKM 442A-041 ..
1. GN/YE
2. BN
3. BU
Discrete I/O devices
1. GN
in Class I, Division 2
2. BK
hazardous
3. WH
locations** or
unclassified locations.
1. BK
2. WH
3. RD
4. GN
1. WH
2. BK
3. GN
4. RD
5. Drain
Discrete or Analog
3-wire circuits in
Class I, Division 2
hazardous
locations** or
1. WH
unclassified locations. 2. BK
3. GN
4. RD
5. Drain
* Length in meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.
Standard coupling nut material is nickel plated brass "P-RKM.."; "P-RKV.." indicates 316 stainless steel.
†
See pages K236 - K244 for reelfast ® cable information.
** Use with lokfast minifast guards (Part Number: LOCK-MINI) in Class I, Division 2 applications.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
K121
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
minifast ® Drop Cordsets, Additional Analog or Discrete Control Circuits
• Straight Female Connectors
• IEC IP 67 Protection
• 300 V, 9 A
(use as ITC limited to 150 V, 5 A)
FM tested to the cable
sealing requirements of
NEC Article 501-5(E)(2)
Housing Style
Part Number
Application
Instruments with
separate power or
signal circuits in Class I,
Division 2 hazardous
locations** or
unclassified locations.
Pinouts
P-RKM 60-025-*M
P-RKM 63-030-*M
ITC/PLTC PVC Yellow
6x16 AWG
105°C
9.6 mm OD
Cable #RF51030-*M†
1. WH
2. RD
3. GN
4. OG
5. BK
6. BU
P-RKM 63-233-*M
ITC-Exposed Run/Direct
Burial/PLTC PVC Plum
6x16 AWG
105°C
11.2 mm OD
Cable #RF51233-*M†
1. WH
2. RD
3. GN
4. OG
5. BK
6. BU
P-RKM 66-318-*M
ITC/PLTC PVC Plum
5x18 AWG, 2 STP with GND
Foil/Drain (20)
105°C
7.9 mm OD
Cable #RF51318-*M†
P-RKM 71-219-*M
ITC/PLTC PVC Plum
6x16 AWG
Foil Drain (18)
105°C
9.6 mm OD
Cable #RF51219-*M†
P-RKM 71-329-*M
ITC/PLTC PVC Blue
6x16 AWG
Foil Drain (18)
105°C
9.6 mm OD
Cable #RF51329-*M†
P-RKM ..
P-RKM ..
Cable
ITC/PLTC PVC Plum
5x16 AWG, 1 STP plus 1 Triad
Foil/Drain (18)
105°C
12.5 mm OD
Cable #RF51025-*M†
Discrete I/O devices in
Class I, Division 2
hazardous locations**
or unclassified
locations.
1. BU
2. BN
3. GN/YE
4. WH
5. BK
6. Drain
1. BU
2. BN
3. GN/YE
4. WH
5. BK
6. Drain
1. WH
2. BK
3. Drain
4. RD
5. OG
6. BU
7. GN
* Length in meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.
Standard coupling nut material is nickel plated brass "P-RKM.."; "P-RKV.." indicates 316 stainless steel.
†
See pages K236 - K244 for reelfast ® cable information.
** Use with lokfast minifast guards (Part Number: LOCK-MINI + LOCK-MINI-B&C) in Class I, Division 2 applications.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K122
TURCK
Process Wiring Products
minifast ® Drop Cordsets, Additional Analog or Discrete Control Circuits
• Straight Male Connectors
• IEC IP 67 Protection
• 300 V, 9 A
(use as ITC limited to 150 V, 5 A)
FM tested to the cable
sealing requirements of
NEC Article 501-5(E)(2)
Housing Style
Part Number
P-RSM ..
Cable
Application
Pinouts
P-RSM 321-880-*M
ITC/PLTC PVC Yellow
3x18 AWG
105°C
7.2 mm OD
Cable #RF50880-*M†
P-RSM 33-187-*M
ITC/PLTC PVC Grey
3x18 AWG
105°C
7.2 mm OD
Cable #RF51187-*M†
P-RSM 442A-041-*M
ITC/PLTC ARMOR PVC Yellow
4x18 AWG
105°C
13.5 mm OD
Cable #RF51041-*M†
P-RSM 51-108-*M
ITC/PLTC PVC Plum
4x18 AWG, 1 Shielded Triad
with GND
Foil/Drain (20)
105°C
8.1 mm OD
Cable #RF51108-*M†
Discrete or Analog
3-wire circuits in
Class I, Division 2
hazardous
locations** or
unclassified
locations.
P-RSM 52-972-*M
ITC/PLTC PVC Grey
5x18 AWG
105°C
7.2 mm OD
Cable #RF50972-*M†
P-RSM 55-099-*M
ITC/PLTC PVC Plum
4x16 AWG, 1 Shielded Triad
with GND
Foil/Drain (18)
105°C
10.4 mm OD
Cable #RF51099-*M†
1. BK
2. WH
3. GY
Discrete I/O Devices 4. BN
in Class I, Division 2 5. BU
Hazardous
Locations** or
Unclassified
Locations.
P-RSM 442A-041 ..
P-RSM 55-328-*M
ITC/PLTC PVC Blue
4x16 AWG, 1 Triad with GND
Foil/Drain (18)
105°C
10.4 mm OD
Cable #RF51328-*M†
1. GN/YE
2. BN
3. BU
Discrete I/O devices
in Class I, Division 2
hazardous
locations** or
unclassified
locations.
1. GN/YE
2. BN
3. BU
1. BK
2. WH
3. RD
4. GN
Discrete or Analog
3-wire circuits in
Class I, Division 2
hazardous
locations** or
unclassified
locations.
1. BU
2. BN
3. GN/YE
4. Drain
5. BK
1. WH
2. BK
3. GN
4. RD
5. Drain
* Length in meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.
Standard coupling nut material is nickel plated brass "P-RSM.."; "P-RSV.." indicates 316 stainless steel.
†
See pages K236 - K244 for reelfast ® cable information.
** Use with lokfast minifast guards (Part Number: LOCK-MINI) in Class I, Division 2 applications.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
K123
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
minifast ® Drop Cordsets, Additional Analog or Discrete Control Circuits
• Straight Male Connectors
• IEC IP 67 Protection
• 300 V, 9 A
(use as ITC limited to 150 V, 5 A)
FM tested to the cable
sealing requirements of
NEC Article 501-5(E)(2)
Housing Style
Part Number
Application
Instruments with
separate power or
signal circuits in Class I,
Division 2 hazardous
locations** or
unclassified locations.
Pinouts
P-RSM 60-025-*M
P-RSM 63-030-*M
ITC/PLTC PVC Yellow
6x16 AWG
105°C
9.6 mm OD
Cable #RF51030-*M†
1. WH
2. RD
3. GN
4. OG
5. BK
6. BU
P-RSM 63-233-*M
ITC-Exposed Run/Direct
Burial/PLTC PVC Plum
6x16 AWG
105°C
11.2 mm OD
Cable #RF51233-*M†
1. WH
2. RD
3. GN
4. OG
5. BK
6. BU
P-RSM 66-318-*M
ITC/PLTC PVC Plum
5x18 AWG, 2 STP with GND
Foil/Drain (20)
105°C
7.9 mm OD
Cable #RF51318-*M†
P-RSM 71-219-*M
ITC/PLTC PVC Plum
6x16 AWG
Foil Drain (18)
105°C
9.6 mm OD
Cable #RF51219-*M†
P-RSM 71-329-*M
ITC/PLTC PVC Blue
6x16 AWG
Foil Drain (18)
105°C
9.6 mm OD
Cable #RF51329-*M†
P-RSM ..
P-RSM ..
Cable
ITC/PLTC PVC Plum
5x16 AWG, 1 STP plus 1 Triad
Foil/Drain (18)
105°C
12.5 mm OD
Cable #RF51025-*M†
Discrete I/O Devices in
Class I, Division 2
Hazardous Locations**
or Unclassified
Locations.
1. BU
2. BN
3. GN/YE
4. WH
5. BK
6. Drain
1. BU
2. BN
3. GN/YE
4. WH
5. BK
6. Drain
1. WH
2. BK
3. Drain
4. RD
5. OG
6. BU
7. GN
* Length in meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.
Standard coupling nut material is nickel plated brass "P-RSM.."; "P-RSV.." indicates 316 stainless steel.
†
See pages K236 - K244 for reelfast ® cable information.
** Use with lokfast minifast guards (Part Number: LOCK-MINI + LOCK-MINI-B&C) in Class I, Division 2 applications.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K124
TURCK
Process Wiring Products
minifast ® Drop Cordsets, Additional Analog or Discrete Control Circuits
• Right Angle Female Connectors
• IEC IP 67 Protection
• 300 V, 9 A
(use as ITC limited to 150 V, 5 A)
FM tested to the cable
sealing requirements of
NEC Article 501-5(E)(2)
Housing Style
Part Number
Cable
Application
Pinouts
P-WKM 321-880-*M
ITC/PLTC PVC Yellow
3x18 AWG
105°C
7.2 mm OD
Cable #RF50880-*M†
P-WKM 33-187-*M
ITC/PLTC PVC Grey
3x18 AWG
105°C
7.2 mm OD
Cable #RF51187-*M†
P-WKM 51-108-*M
ITC/PLTC PVC Plum
4x18 AWG, 1 Shielded Triad
with GND
Foil/Drain (20)
105°C
8.1 mm OD
Cable #RF51108-*M†
Discrete or Analog
3-wire circuits in Class
I, Division 2 hazardous
locations** or
unclassified locations.
1. BU
2. BN
3. GN/YE
4. Drain
5. BK
P-WKM 52-972-*M
ITC/PLTC PVC Grey
5x18 AWG
105°C
7.2 mm OD
Cable #RF50972-*M†
Discrete I/O Devices in
Class I, Division 2
Hazardous Locations**
or Unclassified
Locations.
1. BK
2. WH
3. GY
4. BN
5. BU
P-WKM 55-099-*M
ITC/PLTC PVC Plum
4x16 AWG, 1 Shielded Triad
with GND
Foil/Drain (18)
105°C
10.4 mm OD
Cable #RF51099-*M†
Discrete or Analog
3-wire circuits in Class
I, Division 2 hazardous
locations** or
unclassified locations.
1. WH
2. BK
3. GN
4. RD
5. Drain
P-WKM ..
P-WKM 55-328-*M
ITC/PLTC PVC Blue
4x16 AWG, 1 Triad with GND
Foil/Drain (18)
105°C
10.4 mm OD
Cable #RF51328-*M†
Discrete I/O devices in
Class I, Division 2
hazardous locations**
or unclassified
locations.
1. GN/YE
2. BN
3. BU
1. GN
2. BK
3. WH
* Length in meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.
Standard coupling nut material is nickel plated brass "P-WKM.."; "P-WKV.." indicates 316 stainless steel.
†
See pages K236 - K244 for reelfast ® cable information.
** Use with lokfast minifast guards (Part Number: LOCK-MINI-ANGLE) in Class I, Division 2 applications.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
K125
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
minifast ® Drop Cordsets, Additional Analog or Discrete Control Circuits
• Right Angle Female Connectors
• IEC IP 67 Protection
• 300 V, 9 A
(use as ITC limited to 150 V, 5 A)
FM tested to the cable
sealing requirements of
NEC Article 501-5(E)(2)
Housing Style
Part Number
Cable
Application
Instruments with
separate power or signal
circuits in Class I,
Division 2 hazardous
locations** or
unclassified locations.
Pinouts
P-WKM 60-025-*M
ITC/PLTC PVC Plum
5x16 AWG, 1 STP plus 1 Triad
Foil/Drain (18)
105°C
12.5 mm OD
Cable #RF51025-*M†
P-WKM 63-030-*M
ITC/PLTC PVC Yellow
6x16 AWG
105°C
9.6 mm OD
Cable #RF51030-*M†
1. WH
2. RD
3. GN
4. OG
5. BK
6. BU
P-WKM 63-233-*M
ITC-Exposed Run/Direct
Burial/PLTC PVC Plum
6x16 AWG
105°C
11.2 mm OD
Cable #RF51233-*M†
1. WH
2. RD
3. GN
4. OG
5. BK
6. BU
P-WKM 66-318-*M
ITC/PLTC PVC Plum
5x18 AWG, 2 STP with GND
Foil/Drain (20)
105°C
7.9 mm OD
Cable #RF51318-*M†
P-WKM 71-219-*M
ITC/PLTC PVC Plum
6x16 AWG
Foil Drain (18)
105°C
9.6 mm OD
Cable #RF51219-*M†
P-WKM 71-329-*M
ITC/PLTC PVC Blue
6x16 AWG
Foil Drain (18)
105°C
9.6 mm OD
Cable #RF51329-*M†
P-WKM ..
P-WKM ..
Discrete I/O devices in
Class I, Division 2
hazardous locations** or
unclassified locations.
1. BU
2. BN
3. GN/YE
4. WH
5. BK
6. Drain
1. BU
2. BN
3. GN/YE
4. WH
5. BK
6. Drain
1. WH
2. BK
3. Drain
4. RD
5. OG
6. BU
7. GN
* Length in meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.
Standard coupling nut material is nickel plated brass "P-WKM.."; "P-WKV.." indicates 316 stainless steel.
†
See pages K236 - K244 for reelfast ® cable information.
** Use with lokfast minifast guards (Part Number: LOCK-MINI-ANGLE + LOCK-MINI-B&C-ANGLE) in Class I, Division 2 applications.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K126
TURCK
Process Wiring Products
minifast ® Drop Cordsets, Additional Analog or Discrete Control Circuits
• Right Angle Male Connectors
• IEC IP 67 Protection
• 300 V, 9 A
(use as ITC limited to 150 V, 5 A)
FM tested to the cable
sealing requirements of
NEC Article 501-5(E)(2)
Housing Style
P-WSM ..
Part Number
Cable
Application
Pinouts
P-WSM 321-880-*M
ITC/PLTC PVC Yellow
3x18 AWG
105°C
7.2 mm OD
Cable #RF50880-*M†
P-WSM 33-187-*M
ITC/PLTC PVC Grey
3x18 AWG
105°C
7.2 mm OD
Cable #RF51187-*M†
P-WSM 51-108-*M
ITC/PLTC PVC Plum
4x18 AWG, 1 Shielded Triad
with GND
Foil/Drain (20)
105°C
8.1 mm OD
Cable #RF51108-*M†
Discrete or Analog
3-wire circuits in
Class I, Division 2
hazardous locations**
or unclassified
locations.
1. BU
2. BN
3. GN/YE
4. Drain
5. BK
P-WSM 52-972-*M
ITC/PLTC PVC Grey
5x18 AWG
105°C
7.2 mm OD
Cable #RF50972-*M†
Discrete I/O Devices
in Class I, Division 2
Hazardous
Locations** or
Unclassified
Locations.
1. BK
2. WH
3. GY
4. BN
5. BU
P-WSM 55-099-*M
ITC/PLTC PVC Plum
4x16 AWG, 1 Shielded Triad
with GND
Foil/Drain (18)
105°C
10.4 mm OD
Cable #RF51099-*M†
Discrete or Analog
3-wire circuits in
Class I, Division 2
hazardous locations**
or unclassified
locations.
1. WH
2. BK
3. GN
4. RD
5. Drain
P-WSM 55-328-*M
ITC/PLTC PVC Blue
4x16 AWG, 1 Triad with GND
Foil/Drain (18)
105°C
10.4 mm OD
Cable #RF51328-*M†
1. GN/YE
2. BN
Discrete I/O devices in
3. BU
Class I, Division 2
hazardous locations**
or unclassified
1. GN
locations.
2. BK
3. WH
* Length in meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.
Standard coupling nut material is nickel plated brass "P-WSM.."; "P-WSV.." indicates 316 stainless steel.
†
See pages K236 - K244 for reelfast ® cable information.
** Use with lokfast minifast guards (Part Number: LOCK-MINI-ANGLE) in Class I, Division 2 applications.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
K127
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
minifast ® Drop Cordsets, Additional Analog or Discrete Control Circuits
• Right Angle Male Connectors
• IEC IP 67 Protection
• 300 V, 9 A
(use as ITC limited to 150 V, 5 A)
FM tested to the cable
sealing requirements of
NEC Article 501-5(E)(2)
Housing Style
Part Number
Cable
Application
Instruments with
separate power or
signal circuits in
Class I, Division 2
hazardous
locations** or
unclassified
locations.
Pinouts
P-WSM 60-025-*M
ITC/PLTC PVC Plum
5x16 AWG, 1 STP
Foil/Drain (18)
105°C
12.5 mm OD
Cable #RF51025-*M†
P-WSM 63-030-*M
ITC/PLTC PVC Yellow
6x16 AWG
105°C
9.6 mm OD
Cable #RF51030-*M†
1. WH
2. RD
3. GN
4. OG
5. BK
6. BU
P-WSM 63-233-*M
ITC-Exposed Run/Direct
Burial/PLTC PVC Plum
6x16 AWG
105°C
11.2 mm OD
Cable #RF51233-*M†
1. WH
2. RD
3. GN
4. OG
5. BK
6. BU
P-WSM 66-318-*M
ITC/PLTC PVC Plum
5x18 AWG, 2 STP with GND
Foil/Drain (20)
105°C
7.9 mm OD
Cable #RF51318-*M†
P-WSM 71-219-*M
ITC/PLTC PVC Plum
6x16 AWG
Foil Drain (18)
105°C
9.6 mm OD
Cable #RF51219-*M†
P-WSM 71-329-*M
ITC/PLTC PVC Blue
6x16 AWG
Foil Drain (18)
105°C
9.6 mm OD
Cable #RF51329-*M†
P-WSM ..
P-WSM ..
Discrete I/O Devices
in Class I, Division 2
Hazardous
Locations** or
Unclassified
Locations.
1. BU
2. BN
3. GN/YE
4. WH
5. BK
6. Drain
1. BU
2. BN
3. GN/YE
4. WH
5. BK
6. Drain
1. WH
2. BK
3. Drain
4. RD
5. OG
6. BU
7. GN
* Length in meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.
Standard coupling nut material is nickel plated brass "P-WSM.."; "P-WSV.." indicates 316 stainless steel.
†
See pages K236 - K244 for reelfast ® cable information.
** Use with lokfast minifast guards (Part Number: LOCK-MINI-ANGLE + LOCK-MINI-B&C-ANGLE) in Class I, Division 2 applications.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K128
TURCK
Process Wiring Products
minifast ® Receptacles with Cable, Additional Analog or Discrete Control Circuits
1
P-RKF .. 14.5/NPT
2
Pages K131 - K132
P-RSF .. 14.5/NPT
3
P-RKF .. 14.75/NPT
4
Pages K136 - K136
P-RSF .. 14.75/NPT
5
P-RKF .. M20
K129
Pages K133 - K134
Pages K137 - K138
6
Pages K139 - K140
P-RSF .. M20
Pages K141 - K142
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
minifast ® Receptacles with Cable, Additional Analog or Discrete Control Circuits
7
"B" Style P-RKF .. 14.5/NPT
8
Page K132
"B" Style P-RSF .. 14.5/NPT
9
"B" Style P-RKF .. 14.75/NPT
10
Page K136
"B" Style P-RSF .. 14.75/NPT
11
"B" Style P-RKF .. M20
Page K134
Page K138
12
Page K140
"B" Style P-RSF .. M20
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
Page K142
www.turck.com
www.barr-thorp.com
K130
TURCK
Process Wiring Products
minifast ® Receptacles with Cable, Additional Analog or Discrete Control Circuits
• Female Receptacles
• IEC IP 67 Protection
• 300 V, 9 A
(use as ITC limited to 150 V, 5 A)
Housing Style
Part Number
P-RKF 321-880-*/14.5/NPT
P-RKF 33-187-*/14.5/NPT
Cable
ITC/PLTC PVC Yellow
3x18 AWG
105°C
7.2 mm OD
Cable #RF50880-*M†
ITC/PLTC PVC Grey
3x18 AWG
105°C
7.2 mm OD
Application
Discrete I/O devices
in Class I, Division 2
hazardous
locations** or
unclassified
locations.
1/2-14NPT Conduit
Entry Thread.
Pinouts
1. GN/YE
2. BN
3. BU
1. GN
2. BK
3. WH
Cable #RF51187-*M†
1
P-RKF 51-108-*/14.5/NPT
P-RKF 52-972-*/14.5/NPT
ITC/PLTC PVC Plum
4x18 AWG, 1 Shielded Triad
with GND
Foil/Drain (20)
105°C
8.1 mm OD
Cable #RF51108-*M†
ITC/PLTC PVC Grey
5x18 AWG
105°C
7.2 mm OD
Cable #RF50972-*M†
P-RKF 55-099-*/14.5/NPT
ITC/PLTC PVC Plum
4x16 AWG, 1 Shielded Triad
with GND
Foil/Drain (18)
105°C
10.4 mm OD
Cable #RF51099-*M†
P-RKF 55-328-*/14.5/NPT
ITC/PLTC PVC Blue
4x16 AWG, 1 Triad with GND
Foil/Drain (18)
105°C
10.4 mm OD
Cable #RF51328-*M†
Discrete or analog
3-wire circuits in
Class I, Division 2
hazardous locations
or unclassified
locations.
1/2-14NPT Conduit
Entry Thread.
1. BU
2. BN
3. GN/YE
4. Drain
5. BK
Discrete I/O Devices
in Class I, Division 2
Hazardous
Locations** or
Unclassified
Locations.
1. BK
2. WH
3. GY
4. BN
5. BU
Discrete or analog
3-wire circuits in
Class I, Division 2
hazardous locations
or unclassified
locations.
1/2-14NPT Conduit
Entry Thread.
1. WH
2. BK
3. GN
4. RD
5. Drain
1. WH
2. BK
3. GN
4. RD
5. Drain
See page K129 for dimensional drawings.
* Length in meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.
Standard housing material is nickel plated brass "P-RKM.."; "P-RKV.." indicates 316 stainless steel.
Receptacles recommend 13/16" (21.0 mm) hole for panel mounting.
†
See pages K236 - K244 for reelfast ® cable information.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
K131
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
minifast ® Receptacles with Cable, Additional Analog or Discrete Control Circuits
• Female Receptacles
• IEC IP 67 Protection
• 300 V, 9 A
(use as ITC limited to 150 V, 5 A)
Housing Style
Part Number
Cable
Application
Pinout
P-RKF 60-025-*/14.5/NPT
Instruments with
separate power
and signal circuits
ITC/PLTC PVC Plum
in Class I, Division
5x16 AWG, 1 STP plus 1 Triad
2 hazardous
Foil/Drain (18)
locations or
105°C
unclassified
12.5 mm OD
locations.
Cable #RF51025-*M†
1/2-14NPT
Conduit Entry
Thread.
1. BU
2. BN
3. GN/YE
4. WH
5. BK
6. Drain
P-RKF 63-030-*/14.5/NPT
ITC/PLTC PVC Yellow
6x16 AWG
105°C
9.6 mm OD
Cable #RF51030-*M†
1. WH
2. RD
3. GN
4. OG
5. BK
6. BU
P-RKF 63-233-*/14.5/NPT
ITC-Exposed Run/Direct
Burial/PLTC PVC Plum
6x16 AWG
105°C
11.2 mm OD
Cable #RF51233-*M†
1. WH
2. RD
3. GN
4. OG
5. BK
6. BU
1
P-RKF 66-318-*/14.5/NPT
ITC/PLTC PVC Plum
5x18 AWG, 2 STP with GND
Foil/Drain (20)
105°C
7.9 mm OD
Cable #RF51318-*M†
P-RKF 71-219-*/14.5/NPT
ITC/PLTC PVC Plum
6x16 AWG
Foil/Drain (18)
105°C
9.6 mm OD
Cable #RF51219-*M†
P-RKF 71-329-*/14.5/NPT
ITC/PLTC PVC Blue
6x16 AWG
Foil Drain (18)
105°C
9.6 mm OD
Cable #RF51329-*M†
7
Discrete I/O
devices in Class I,
Division 2
hazardous
locations or
unclassified
locations.
1/2-14NPT
Conduit Entry
Thread.
1. BU
2. BN
3. GN/YE
4. WH
5. BK
6. Drain
1. WH
2. BK
3. Drain
4. RD
5. OG
6. BU
7. GN
See page K129 - K130 for dimensional drawings.
* Length in meters. Standard cable length is 0.5 meters. Consult factory for other lengths.
Standard housing material is nickel plated brass "P-RKF.."; "P-RKFV.." indicates 316 stainless steel.
Receptacles recommend 13/16" (21.0 mm) hole for panel mounting; 7-pin recommends 7/8" (22.0 mm).
†
See pages K236 - K244 for reelfast ® cable information.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K132
TURCK
Process Wiring Products
minifast ® Receptacles with Cable, Additional Analog or Discrete Control Circuits
• Male Receptacles
• IEC IP 67 Protection
• 300 V, 9 A
(use as ITC limited to 150 V, 5 A)
Housing Style
Part Number
2
Cable
P-RSF 321-880-*/14.5/NPT
ITC/PLTC PVC Yellow
3x18 AWG
105°C
7.2 mm OD
Cable #RF50880-*M†
P-RSF 33-187-*/14.5/NPT
ITC/PLTC PVC Grey
3x18 AWG
105°C
7.2 mm OD
Cable #RF51187-*M†
Application
Discrete I/O
devices in Class I,
Division 2
hazardous
locations or
unclassified
locations.
1/2-14NPT
Conduit Entry
Thread.
Pinout
1. GN/YE
2. BN
3. BU
1. GN
2. BK
3. WH
P-RSF 51-108-*/14.5/NPT
ITC/PLTC PVC Plum
4x18 AWG, 1 Shielded Triad
with GND
Foil/Drain (20)
105°C
8.1 mm OD
Cable #RF51108-*M†
Discrete or analog
3-wire circuits in
Class I, Division 2
hazardous
locations or
unclassified
locations.
1/2-14NPT
Conduit Entry
Thread.
1. BU
2. BN
3. GN/YE
4. Drain
5. BK
P-RSF 52-972-*/14.5/NPT
ITC/PLTC PVC Grey
5x18 AWG
105°C
7.2 mm OD
Cable #RF50972-*M†
Discrete I/O
Devices in Class I,
Division 2
Hazardous
Locations or
Unclassified
Locations.
1. BK
2. WH
3. GY
4. BN
5. BU
P-RSF 55-099-*/14.5/NPT
ITC/PLTC PVC Plum
4x16 AWG, 1 Shielded Triad
with GND
Foil/Drain (18)
105°C
10.4 mm OD
Cable #RF51099-*M†
Discrete or analog
3-wire circuits in
Class I, Division 2
hazardous
locations or
unclassified
locations.
1/2-14NPT
Conduit Entry
Thread.
1. WH
2. BK
3. GN
4. RD
5. Drain
P-RSF 55-328-*/14.5/NPT
ITC/PLTC PVC Blue
4x16 AWG, 1 Triad with GND
Foil/Drain (18)
105°C
10.4 mm OD
Cable #RF51328-*M†
See page K129 for dimensional drawings.
* Length in meters. Standard cable length is 0.5 meters. Consult factory for other lengths.
Standard housing material is nickel plated brass "P-RSF.."; "P-RSFV.." indicates 316 stainless steel.
Receptacles recommend 13/16" (21.0 mm) hole for panel mounting.
†
See pages K236 - K244 for reelfast ® cable information.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
K133
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
minifast ® Receptacles with Cable, Additional Analog or Discrete Control Circuits
• Male Receptacles
• IEC IP 67 Protection
• 300 V, 9 A
(use as ITC limited to 150 V, 5 A)
Housing Style
Part Number
2
8
Cable
Application
Pinout
P-RSF 60-025-*/14.5/NPT
Instruments with
separate power and
ITC/PLTC PVC Plum
signal circuits in
5x16 AWG, 1 STP plus 1 Triad
Class I, Division 2
Foil/Drain (18)
hazardous locations
105°C
or unclassified
12.5 mm OD
locations.
Cable #RF51025-*M†
1/2-14NPT Conduit
Entry Thread.
1. BU
2. BN
3. GN/YE
4. WH
5. BK
6. Drain
P-RSF 63-030-*/14.5/NPT
ITC/PLTC PVC Yellow
6x16 AWG
105°C
9.6 mm OD
Cable #RF51030-*M†
1. WH
2. RD
3. GN
4. OG
5. BK
6. BU
P-RSF 63-233-*/14.5/NPT
ITC-Exposed Run/Direct
Burial/PLTC PVC Plum
6x16 AWG
105°C
11.2 mm OD
Cable #RF51233-*M†
1. WH
2. RD
3. GN
4. OG
5. BK
6. BU
P-RSF 66-318-*/14.5/NPT
ITC/PLTC PVC Plum
5x18 AWG, 2 STP with GND
Foil/Drain (20)
105°C
7.9 mm OD
Cable #RF51318-*M†
P-RSF 71-219-*/14.5/NPT
ITC/PLTC PVC Plum
6x16 AWG
Foil/Drain (18)
105°C
9.6 mm OD
Cable #RF51219-*M†
P-RSF 71-329-*/14.5/NPT
ITC/PLTC PVC Blue
6x16 AWG
Foil Drain (18)
105°C
9.6 mm OD
Cable #RF51329-*M†
Discrete I/O devices
in Class I, Division 2
hazardous locations
or unclassified
locations.
1/2-14NPT Conduit
Entry Thread.
1. BU
2. BN
3. GN/YE
4. WH
5. BK
6. Drain
1. WH
2. BK
3. Drain
4. RD
5. OG
6. BU
7. GN
See page K129 - K130 for dimensional drawings.
* Length in meters. Standard cable length is 0.5 meters. Consult factory for other lengths.
Standard housing material is nickel plated brass "P-RSF.."; "P-RSFV.." indicates 316 stainless steel.
Receptacles recommend 13/16" (21.0 mm) hole for panel mounting; 7-pin recommends 7/8" (22.0 mm).
†
See pages K236 - K244 for reelfast ® cable information.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K134
TURCK
Process Wiring Products
minifast ® Receptacles with Cable, Additional Analog or Discrete Control Circuits
• Female Receptacles
• IEC IP 67 Protection
• 300 V, 9 A
(use as ITC limited to 150 V, 5 A)
Housing Style
Part Number
3
Cable
Application
Pinout
P-RKF 321-880-*/14.75/NPT
ITC/PLTC PVC Yellow
3x18 AWG
105°C
7.2 mm OD
Cable #RF50880-*M†
P-RKF 33-187-*/14.75/NPT
ITC/PLTC PVC Grey
3x18 AWG
105°C
7.2 mm OD
Cable #RF51187-*M†
P-RKF 51-108-*/14.75/NPT
ITC/PLTC PVC Plum
4x18 AWG, 1 Shielded Triad
with GND
Foil/Drain (20)
105°C
8.1 mm OD
Cable #RF51108-*M†
Discrete or analog
3-wire circuits in
Class I, Division 2
hazardous
locations or
unclassified
locations.
3/4-14NPT Conduit
Entry Thread.
1. BU
2. BN
3. GN/YE
4. Drain
5. BK
P-RKF 52-972-*/14.75/NPT
ITC/PLTC PVC Grey
5x18 AWG
105°C
7.2 mm OD
Cable #RF50972-*M†
Discrete I/O
Devices in Class I,
Division 2
Hazardous
Locations or
Unclassified
Locations.
1. BK
2. WH
3. GY
4. BN
5. BU
P-RKF 55-099-*/14.75/NPT
ITC/PLTC PVC Plum
4x16 AWG, 1 Shielded Triad
with GND
Foil/Drain (18)
105°C
10.4 mm OD
Cable #RF51099-*M†
Discrete or analog
3-wire circuits in
Class I, Division 2
hazardous
locations or
unclassified
locations.
3/4-14NPT Conduit
Entry Thread.
1. WH
2. BK
3. GN
4. RD
5. Drain
P-RKF 55-328-*/14.75/NPT
ITC/PLTC PVC Blue
4x16 AWG, 1 Triad with GND
Foil/Drain (18)
105°C
10.4 mm OD
Cable #RF51328-*M†
Discrete I/O
devices in Class I,
Division 2
hazardous
locations or
unclassified
locations.
3/4-14NPT Conduit
Entry Thread.
1. GN/YE
2. BN
3. BU
1. GN
2. BK
3. WH
See page K129 for dimensional drawings.
* Length in meters. Standard cable length is 0.5 meters. Consult factory for other lengths.
Standard housing material is nickel plated brass "P-RKF.."; "P-RKFV.." indicates 316 stainless steel.
Receptacles recommend 1-1/16" (27.0 mm) hole for panel mounting.
†
See pages K236 - K244 for reelfast ® cable information.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
K135
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
minifast ® Receptacles with Cable, Additional Analog or Discrete Control Circuits
• Female Receptacles
• IEC IP 67 Protection
• 300 V, 9 A
(use as ITC limited to 150 V, 5 A)
Housing Style
Part Number
Cable
Application
Pinout
P-RKF 60-025-*/14.75/NPT
Instruments with
separate power and
signal circuits in
ITC/PLTC PVC Plum
5x16 AWG, 1 STP plus 1 Triad Class I, Division 2
hazardous
Foil/Drain (18)
locations or
105°C
unclassified
12.5 mm OD
locations.
Cable #RF51025-*M†
3/4-14NPT Conduit
Entry Thread.
1. BU
2. BN
3. GN/YE
4. WH
5. BK
6. Drain
P-RKF 63-030-*/14.75/NPT
ITC/PLTC PVC Yellow
6x16 AWG
105°C
9.6 mm OD
Cable #RF51030-*M†
1. WH
2. RD
3. GN
4. OG
5. BK
6. BU
P-RKF 63-233-*/14.75/NPT
ITC-Exposed Run/Direct
Burial/PLTC PVC Plum
6x16 AWG
105°C
11.2 mm OD
Cable #RF51233-*M†
1. WH
2. RD
3. GN
4. OG
5. BK
6. BU
P-RKF 66-318-*/14.75/NPT
ITC/PLTC PVC Plum
5x18 AWG, 2 STP with GND
Foil/Drain (20)
105°C
7.9 mm OD
Cable #RF51318-*M†
P-RKF 71-219-*/14.75/NPT
ITC/PLTC PVC Plum
6x16 AWG
Foil/Drain (18)
105°C
9.6 mm OD
Cable #RF51219-*M†
P-RKF 71-329-*/14.75/NPT
ITC/PLTC PVC Blue
6x16 AWG
Foil Drain (18)
105°C
9.6 mm OD
Cable #RF51329-*M†
3
9
Discrete I/O
devices in Class I,
Division 2
hazardous
locations or
unclassified
locations.
3/4-14NPT Conduit
Entry Thread.
1. BU
2. BN
3. GN/YE
4. WH
5. BK
6. Drain
1. WH
2. BK
3. Drain
4. RD
5. OG
6. BU
7. GN
See page K129 - K130 for dimensional drawings.
* Length in meters. Standard cable length is 0.5 meters. Consult factory for other lengths.
Standard housing material is nickel plated brass "P-RKF.."; "P-RKFV.." indicates 316 stainless steel.
Receptacles recommend 1-1/16" (27.0 mm) hole for panel mounting; 7-pin recommends 1-1/16" (27.0 mm).
†
See pages K236 - K244 for reelfast ® cable information.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K136
TURCK
Process Wiring Products
minifast ® Receptacles with Cable, Additional Analog or Discrete Control Circuits
• Male Receptacles
• IEC IP 67 Protection
• 300 V, 9 A
(use as ITC limited to 150 V, 5 A)
Housing Style
Part Number
Cable
Application
Pinout
P-RSF 321-880-*/14.75/NPT
ITC/PLTC PVC Yellow
3x18 AWG
105°C
7.2 mm OD
Cable #RF50880-*M†
P-RSF 33-187-*/14.75/NPT
ITC/PLTC PVC Grey
3x18 AWG
105°C
7.2 mm OD
Cable #RF51187-*M†
P-RSF 51-108-*/14.75/NPT
ITC/PLTC PVC Plum
4x18 AWG, 1 Shielded Triad
with GND
Foil/Drain (20)
105°C
8.1 mm OD
Cable #RF51108-*M†
Discrete or analog
3-wire circuits in
Class I, Division 2
hazardous
locations or
unclassified
locations.
3/4-14NPT Conduit
Entry Thread.
1. BU
2. BN
3. GN/YE
4. Drain
5. BK
P-RSF 52-972-*/14.75/NPT
ITC/PLTC PVC Grey
5x18 AWG
105°C
7.2 mm OD
Cable #RF50972-*M†
Discrete I/O
Devices in Class I,
Division 2
Hazardous
Locations** or
Unclassified
Locations.
1. BK
2. WH
3. GY
4. BN
5. BU
P-RSF 55-099-*/14.75/NPT
ITC/PLTC PVC Plum
4x16 AWG, 1 Shielded Triad
with GND
Foil/Drain (18)
105°C
10.4 mm OD
Cable #RF51099-*M†
Discrete or analog
3-wire circuits in
Class I, Division 2
hazardous
locations or
unclassified
locations.
3/4-14NPT Conduit
Entry Thread.
1. WH
2. BK
3. GN
4. RD
5. Drain
4
P-RSF 55-328-*/14.75/NPT
ITC/PLTC PVC Blue
4x16 AWG, 1 Triad with GND
Foil/Drain (18)
105°C
10.4 mm OD
Cable #RF51328-*M†
Discrete I/O
devices in Class I,
Division 2
hazardous
locations** or
unclassified
locations.
3/4-14NPT Conduit
Entry Thread.
1. GN/YE
2. BN
3. BU
1. GN
2. BK
3. WH
See page K129 for dimensional drawings.
* Length in meters. Standard cable length is 0.5 meters. Consult factory for other lengths.
Standard housing material is nickel plated brass "P-RSF.."; "P-RSFV.." indicates 316 stainless steel.
Receptacles recommend 1-1/16" (27.0 mm) hole for panel mounting.
†
See pages K236 - K244 for reelfast ® cable information.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
K137
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
minifast ® Receptacles with Cable, Additional Analog or Discrete Control Circuits
• Male Receptacles
• IEC IP 67 Protection
• 300 V, 9 A
(use as ITC limited to 150 V, 5 A)
Housing Style
Part Number
Application
Pinout
P-RSF 60-025-*/14.75/NPT
Instruments with
separate power and
signal circuits in
ITC/PLTC PVC Plum
5x16 AWG, 1 STP plus 1 Triad Class I, Division 2
hazardous
Foil/Drain (18)
locations or
105°C
unclassified
12.5 mm OD
locations.
Cable #RF51025-*M†
3/4-14NPT Conduit
Entry Thread.
1. BU
2. BN
3. GN/YE
4. WH
5. BK
6. Drain
P-RSF 63-030-*/14.75/NPT
ITC/PLTC PVC Yellow
6x16 AWG
105°C
9.6 mm OD
Cable #RF51030-*M†
1. WH
2. RD
3. GN
4. OG
5. BK
6. BU
P-RSF 63-233-*/14.75/NPT
ITC-Exposed Run/Direct
Burial/PLTC PVC Plum
6x16 AWG
105°C
11.2 mm OD
Cable #RF51233-*M†
1. WH
2. RD
3. GN
4. OG
5. BK
6. BU
P-RSF 66-318-*/14.75/NPT
ITC/PLTC PVC Plum
5x18 AWG, 2 STP with GND
Foil/Drain (20)
105°C
7.9 mm OD
Cable #RF51318-*M†
P-RSF 71-219-*/14.75/NPT
ITC/PLTC PVC Plum
6x16 AWG
Foil/Drain (18)
105°C
9.6 mm OD
Cable #RF51219-*M†
P-RSF 71-329-*/14.75/NPT
ITC/PLTC PVC Blue
6x16 AWG
Foil Drain (18)
105°C
9.6 mm OD
Cable #RF51329-*M†
4
10
Cable
Discrete I/O
devices in Class I,
Division 2
hazardous
locations or
unclassified
locations.
3/4-14NPT Conduit
Entry Thread.
1. BU
2. BN
3. GN/YE
4. WH
5. BK
6. Drain
1. WH
2. BK
3. Drain
4. RD
5. OG
6. BU
7. GN
See page K129 - K130 for dimensional drawings.
* Length in meters. Standard cable length is 0.5 meters. Consult factory for other lengths.
Standard housing material is nickel plated brass "P-RSF.."; "P-RSFV.." indicates 316 stainless steel.
Receptacles recommend 1-1/16" (27.0 mm) hole for panel mounting; 7-pin recommends 1-1/16" (27.0 mm).
†
See pages K236 - K244 for reelfast ® cable information.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K138
TURCK
Process Wiring Products
minifast ® Receptacles with Cable, Additional Analog or Discrete Control Circuits
• Female Receptacles
• IEC IP 67 Protection
• 300 V, 9 A
(use as ITC limited to 150 V, 5 A)
Housing Style
Part Number
Cable
Application
Pinout
P-RKF 321-880-*/M20
ITC/PLTC PVC Yellow
3x18 AWG
105°C
7.2 mm OD
Cable #RF50880-*M†
P-RKF 33-187-*/M20
ITC/PLTC PVC Grey
3x18 AWG
105°C
7.2 mm OD
Cable #RF51187-*M†
P-RKF 51-108-*/M20
ITC/PLTC PVC Plum
4x18 AWG, 1 Shielded Triad
with GND
Foil/Drain (20)
105°C
8.1 mm OD
Cable #RF51108-*M†
Discrete or
analog 3-wire
circuits in Class I,
Division 2
hazardous
locations or
unclassified
locations.
M20 Conduit
Entry Thread.
1. BU
2. BN
3. GN/YE
4. Drain
5. BK
P-RKF 52-972-*/M20
ITC/PLTC PVC Grey
5x18 AWG
105°C
7.2 mm OD
Cable #RF50972-*M†
Discrete I/O
Devices in Class I,
Division 2
Hazardous
Locations or
Unclassified
Locations.
1. BK
2. WH
3. GY
4. BN
5. BU
P-RKF 55-099-*/M20
ITC/PLTC PVC Plum
4x16 AWG, 1 Shielded Triad
with GND
Foil/Drain (18)
105°C
10.4 mm OD
Cable #RF51099-*M†
Discrete or
analog 3-wire
circuits in Class I,
Division 2
hazardous
locations or
unclassified
locations.
M20 Conduit
Entry Thread.
1. WH
2. BK
3. GN
4. RD
5. Drain
5
P-RKF 55-328-*/M20
ITC/PLTC PVC Blue
4x16 AWG, 1 Triad with GND
Foil/Drain (18)
105°C
10.4 mm OD
Cable #RF51328-*M†
Discrete I/O
devices in Class I,
Division 2
hazardous
locations or
unclassified
locations.
M20 Conduit
Entry Thread.
1. GN/YE
2. BN
3. BU
1. GN
2. BK
3. WH
See page K129 for dimensional drawings.
* Length in meters. Standard cable length is 0.5 meters. Consult factory for other lengths.
Standard housing material is nickel plated brass "P-RKF.."; "P-RKFV.." indicates 316 stainless steel.
Receptacles recommend 1-1/16" (27.0 mm) hole for panel mounting.
†
See pages K236 - K244 for reelfast ® cable information.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
K139
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
minifast ® Receptacles with Cable, Additional Analog or Discrete Control Circuits
• Female Receptacles
• IEC IP 67 Protection
• 300 V, 9 A
(use as ITC limited to 150 V, 5 A)
Housing Style
Part Number
Cable
Application
Pinout
P-RKF 60-025-*/M20
Instruments with
separate power
and signal circuits
ITC/PLTC PVC Plum
5x16 AWG, 1 STP plus 1 Triad in Class I, Division
2 hazardous
Foil/Drain (18)
locations or
105°C
unclassified
12.5 mm OD
locations.
Cable #RF51025-*M†
M20 Conduit Entry
Thread.
1. BU
2. BN
3. GN/YE
4. WH
5. BK
6. Drain
P-RKF 63-030-*/M20
ITC/PLTC PVC Yellow
6x16 AWG
105°C
9.6 mm OD
Cable #RF51030-*M†
1. WH
2. RD
3. GN
4. OG
5. BK
6. BU
P-RKF 63-233-*/M20
ITC-Exposed Run/Direct
Burial/PLTC PVC Plum
6x16 AWG
105°C
11.2 mm OD
Cable #RF51233-*M†
1. WH
2. RD
3. GN
4. OG
5. BK
6. BU
P-RKF 66-318-*/M20
ITC/PLTC PVC Plum
5x18 AWG, 2 STP with GND
Foil/Drain (20)
105°C
7.9 mm OD
Cable #RF51318-*M†
P-RKF 71-219-*/M20
ITC/PLTC PVC Plum
6x16 AWG
Foil/Drain (18)
105°C
9.6 mm OD
Cable #RF51219-*M†
P-RKF 71-329-*/M20
ITC/PLTC PVC Blue
6x16 AWG
Foil Drain (18)
105°C
9.6 mm OD
Cable #RF51329-*M†
5
11
Discrete I/O
devices in Class I,
Division 2
hazardous
locations or
unclassified
locations. M20
Conduit Entry
Thread.
1. BU
2. BN
3. GN/YE
4. WH
5. BK
6. Drain
1. WH
2. BK
3. Drain
4. RD
5. OG
6. BU
7. GN
See page K129 - K130 for dimensional drawings.
* Length in meters. Standard cable length is 0.5 meters. Consult factory for other lengths.
Standard housing material is nickel plated brass "P-RKF.."; "P-RKFV.." indicates 316 stainless steel.
Receptacles recommend 13/16" (21.0 mm) hole for panel mounting.
†
See pages K236 - K244 for reelfast ® cable information.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K140
TURCK
Process Wiring Products
minifast ® Receptacles with Cable, Additional Analog or Discrete Control Circuits
• Male Receptacles
• IEC IP 67 Protection
• 300 V, 9 A
(use as ITC limited to 150 V, 5 A)
Housing Style
6
Part Number
Cable
Application
Pinout
P-RSF 321-880-*/M20
ITC/PLTC PVC Yellow
3x18 AWG
105°C
7.2 mm OD
Cable #RF50880-*M†
P-RSF 33-187-*/M20
ITC/PLTC PVC Grey
3x18 AWG
105°C
7.2 mm OD
Cable #RF51187-*M†
P-RSF 51-108-*/M20
ITC/PLTC PVC Plum
4x18 AWG, 1 Shielded Triad
with GND
Foil/Drain (20)
105°C
8.1 mm OD
Cable #RF51108-*M†
Discrete or analog
3-wire circuits in
Class I, Division 2
hazardous
locations or
unclassified
locations.
M20 Conduit Entry
Thread.
1. BU
2. BN
3. GN/YE
4. Drain
5. BK
P-RSF 52-972-*/M20
ITC/PLTC PVC Grey
5x18 AWG
105°C
7.2 mm OD
Cable #RF50972-*M†
Discrete I/O
Devices in Class I,
Division 2
Hazardous
Locations** or
Unclassified
Locations.
1. BK
2. WH
3. GY
4. BN
5. BU
P-RSF 55-099-*/M20
ITC/PLTC PVC Plum
4x16 AWG, 1 Shielded Triad
with GND
Foil/Drain (18)
105°C
10.4 mm OD
Cable #RF51099-*M†
Discrete or analog
3-wire circuits in
Class I, Division 2
hazardous
locations or
unclassified
locations.
M20 Conduit Entry
Thread.
1. WH
2. BK
3. GN
4. RD
5. Drain
P-RSF 55-328-*/M20
ITC/PLTC PVC Blue
4x16 AWG, 1 Triad with GND
Foil/Drain (18)
105°C
10.4 mm OD
Cable #RF51328-*M†
Discrete I/O
devices in Class I,
Division 2
hazardous
locations** or
unclassified
locations.
1. GN/YE
2. BN
3. BU
1. GN
2. BK
3. WH
See page K129 for dimensional drawings.
* Length in meters. Standard cable length is 0.5 meters. Consult factory for other lengths.
Standard housing material is nickel plated brass "P-RSF.."; "P-RSFV.." indicates 316 stainless steel.
Receptacles recommend 13/16" (21.0 mm) hole for panel mounting.
†
See pages K236 - K244 for reelfast ® cable information.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
K141
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
minifast ® Receptacles with Cable, Additional Analog or Discrete Control Circuits
• Male Receptacles
• IEC IP 67 Protection
• 300 V, 9 A
(use as ITC limited to 150 V, 5 A)
Housing Style
Part Number
6
12
Cable
Application
Pinout
P-RSF 60-025-*/M20
Instruments with
separate power
and signal circuits
ITC/PLTC PVC Plum
5x16 AWG, 1 STP plus 1 Triad in Class I, Division
2 hazardous
Foil/Drain (18)
locations or
105°C
unclassified
12.5 mm OD
locations.
Cable #RF51025-*M†
M20 Conduit Entry
Thread.
1. BU
2. BN
3. GN/YE
4. WH
5. BK
6. Drain
P-RSF 63-030-*/M20
ITC/PLTC PVC Yellow
6x16 AWG
105°C
9.6 mm OD
Cable #RF51030-*M†
1. WH
2. RD
3. GN
4. OG
5. BK
6. BU
P-RSF 63-233-*/M20
ITC-Exposed Run/Direct
Burial/PLTC PVC Plum
6x16 AWG
105°C
11.2 mm OD
Cable #RF51233-*M†
1. WH
2. RD
3. GN
4. OG
5. BK
6. BU
P-RSF 66-318-*/M20
ITC/PLTC PVC Plum
5x18 AWG, 2 STP with GND
Foil/Drain (20)
105°C
7.9 mm OD
Cable #RF51318-*M†
P-RSF 71-219-*/M20
ITC/PLTC PVC Plum
6x16 AWG
Foil/Drain (18)
105°C
9.6 mm OD
Cable #RF51219-*M†
P-RSF 71-329-*/M20
ITC/PLTC PVC Blue
6x16 AWG
Foil Drain (18)
105°C
9.6 mm OD
Cable #RF51329-*M†
Discrete I/O
devices in Class I,
Division 2
hazardous
locations or
unclassified
locations.
M20 Conduit Entry
Thread.
1. BU
2. BN
3. GN/YE
4. WH
5. BK
6. Drain
1. WH
2. BK
3. Drain
4. RD
5. OG
6. BU
7. GN
See page K129 - K130 for dimensional drawings.
* Length in meters. Standard cable length is 0.5 meters. Consult factory for other lengths.
Standard housing material is nickel plated brass "P-RSF.."; "P-RSFV.." indicates 316 stainless steel.
Receptacles recommend 13/16" (21.0 mm) hole for panel mounting.
†
See pages K236 - K244 for reelfast ® cable information.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K142
TURCK
Process Wiring Products
Notes:
K143
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
minifast ® Receptacles with Leads, Additional Analog or Discrete Control Circuits
1
P-RKF ..
2
Page K147
P-RSF ..
Page K148
3
"A" P-RKF .. 14.5/NPT
4
Page K149
"A" P-RSF .. 14.5/NPT
5
"B" P-RKF .. 14.5/NPT
6
Page K150
"B" P-RSF .. 14.5/NPT
7
"C" P-RKF .. 14.5/NPT
Page K151
Page K152
8
Page K150
"C" P-RSF .. 14.5/NPT
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
Page K152
www.turck.com
www.barr-thorp.com
K144
TURCK
Process Wiring Products
minifast ® Receptacles with Leads, Additional Analog or Discrete Control Circuits
9
"A" P-RKF .. 14.75/NPT
10
Page K153
"A" P-RSF .. 14.75/NPT
11
"B" P-RKF .. 14.75/NPT
12
Page K154
"B" P-RSF .. 14.75/NPT
13
"C" P-RKF .. 14.75/NPT
K145
Page K156
14
Page K154
"C" P-RSF .. 14.75/NPT
15
"A" P-RKF .. M20
Page K155
Page K156
16
Page K157
"A" P-RSF .. M20
Page K159
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
minifast ® Receptacles with Leads, Additional Analog or Discrete Control Circuits
17
"B" P-RKF .. M20
18
Page K158
"B" P-RSF .. M20
19
"C" P-RKF .. M20
20
Page K158
"C" P-RSF .. M20
21
"A" P-RKF .. EX-14.5/NPT
Page K160
22
Pages K161 - K162
"A" P-RSF .. EX-14.5/NPT
23
"A" P-RKF .. EX-14.75/NPT
Page K160
Pages K163 - K164
24
Pages K165 - K166
"A" P-RSF .. EX-14.75/NPT
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
Pages K167 - K168
www.turck.com
www.barr-thorp.com
K146
TURCK
Process Wiring Products
minifast ® Receptacles with Leads, Additional Analog or Discrete Control Circuits
• Female Receptacles
• NEMA 1, 3, 4, 6P and IEC IP 67
Protection
Housing Style
Part Number
1
Lead Specs
P-RKF 442-*
UL, CSA
4x18 AWG
105°C
600 V, 9 A
P-RKF 45-*
UL, CSA
3x16 AWG
105°C
600 V, 9 A
P-RKF 52-*
UL, CSA
5x18 AWG
105°C
600 V, 9 A
P-RKF 60D-*
Features
1. BK
2. WH
3. RD
4. GN
1. WH
2. BK
3. N/C
4. GN
1/2-14NPSM Threads
1. BK
2. WH
3. GY
4. BN
5. BU
1/2-14NPSM Threads, Drain Wire
1. BU
2. BN
3. GN/YE
4. WH
5. BK
6. GY
1/2-14NPSM Threads
1. WH
2. RD
3. GN
4. OG
5. BK
6. BU
UL, CSA
6x16 AWG
105°C
600 V, 9 A
P-RKF 63-*
Pinout
See page K144 for dimensional drawings.
* Length in meters. Standard lead length is 0.3 meters. Consult factory for other lengths.
Standard housing material is nickel plated brass "P-RKF.."; "P-RKFV.." indicates 316 stainless steel.
Receptacles recommend 13/16" (21.0 mm) hole for panel mounting.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
K147
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
minifast ® Receptacles with Leads, Additional Analog or Discrete Control Circuits
• Male Receptacles
• NEMA 1, 3, 4, 6P and IEC IP 67
Protection
Housing Style
Part Number
2
Lead Specs
P-RSF 442-*
UL, CSA
4x18 AWG
105°C
600 V, 9 A
P-RSF 45-*
UL, CSA
3x16 AWG
105°C
600 V, 9 A
P-RSF 52-*
UL, CSA
5x18 AWG
105°C
600 V, 9 A
P-RSF 60D-*
Features
1. BK
2. WH
3. RD
4. GN
1. WH
2. BK
3. N/C
4. GN
1/2-14NPSM Threads
1. BK
2. WH
3. GY
4. BN
5. BU
1/2-14NPSM Threads, Drain Wire
1. BU
2. BN
3. GN/YE
4. WH
5. BK
6. GY
1/2-14NPSM Threads
1. WH
2. RD
3. GN
4. OG
5. BK
6. BU
UL, CSA
6x16 AWG
105°C
600 V, 9 A
P-RSF 63-*
Pinout
See page K144 for dimensional drawings.
* Length in meters. Standard lead length is 0.3 meters. Consult factory for other lengths.
Standard housing material is nickel plated brass "P-RSF.."; "P-RSFV.." indicates 316 stainless steel.
Receptacles recommend 13/16" (21.0 mm) hole for panel mounting.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K148
TURCK
Process Wiring Products
minifast ® Receptacles with Leads, Additional Analog or Discrete Control Circuits
• Female Receptacles
• NEMA 1, 3, 4, 6P and IEC IP 67
Protection
Housing Style
Part Number
P-RKF 44-*/14.5/NPT
P-RKF 442-*/14.5/NPT
Lead Specs
Features
Pinout
1. BU
2. BN
3. WH
4. BK
UL, CSA
4x18 AWG
105°C
600 V, 9 A
1. BK
2. WH
3. RD
4. GN
P-RKF 45-*/14.5/NPT
UL, CSA
3x16 AWG
105°C
600 V, 9 A
P-RKF 52-*/14.5/NPT
UL, CSA
5x18 AWG
105°C
600 V, 9 A
P-RKF 56-*/14.5/NPT
UL, CSA
5x18 AWG
105°C
600 V, 9 A
1. BK
2. BU
3. GN/YE
4. BN
5. WH
P-RKF 60-*/14.5/NPT
UL, CSA
5x16 AWG
105°C
600 V, 9 A
1. BU
2. BN
3. GN/YE
4. WH
5. BK
6. N/C
3
P-RKF 60D-*/14.5/NPT
1. WH
2. BK
3. N/C
4. GN
1/2-14NPT Threads, Drain Wire
1. BU
2. BN
3. GN/YE
4. WH
5. BK
6. GY
1/2-14NPT Threads
1. WH
2. RD
3. GN
4. OG
5. BK
6. BU
UL, CSA
6x16 AWG
105°C
600 V, 9 A
P-RKF 63-*/14.5/NPT
1. BK
2. WH
3. GY
4. BN
5. BU
1/2-14NPT Threads
See page K144 for dimensional drawings.
* Length in meters. Standard lead length is 0.3 meters. Consult factory for other lengths.
Standard housing material is nickel plated brass "P-RKF.."; "P-RKFV.." indicates 316 stainless steel.
Receptacles recommend 13/16" (21.0 mm) hole for panel mounting.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
K149
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
minifast ® Receptacles with Leads, Additional Analog or Discrete Control Circuits
• Female Receptacles
• NEMA 1, 3, 4, 6P and IEC IP 67
Protection
Housing Style
Part Number
5
P-RKF 70-*/14.5/NPT
P-RKF 80-*/14.5/NPT
Lead Specs
Features
UL, CSA
7x18 AWG
105°C
600 V, 8 A
UL, CSA
8x18 AWG
105°C
600 V, 8 A
1. BK
2. WH
3. BU
4. RD
5. YE
6. BN
7. GY
8. GN
1/2-14NPT Threads
7
P-RKF 100-*/14.5/NPT
Pinout
1. BU
2. BN
3. GY
4. WH
5. BK
6. GY
7. GN/YE
UL, CSA
10x18 AWG
105°C
600 V, 8 A
1. WH/BK
2. BK/WH
3. WH/GN
4. GN/WH
5. WH/RD
6. RD/WH
7. GY
8. GN/YE
9. WH/OG
10. OG/WH
See page K144 for dimensional drawings.
* Length in meters. Standard lead length is 0.3 meters. Consult factory for other lengths.
Standard housing material is nickel plated brass "P-RKF.."; "P-RKFV.." indicates 316 stainless steel.
Receptacles recommend 13/16" (21.0 mm) hole for panel mounting.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K150
TURCK
Process Wiring Products
minifast ® Receptacles with Leads, Additional Analog or Discrete Control Circuits
• Male Receptacles
• NEMA 1, 3, 4, 6P and IEC IP 67
Protection
Housing Style
Part Number
P-RSF 44-*/14.5/NPT
P-RSF 442-*/14.5/NPT
4
Lead Specs
Features
Pinout
1. BU
2. BN
3. WH
4. BK
UL, CSA
4x18 AWG
105°C
600 V, 9 A
1. BK
2. WH
3. RD
4. GN
P-RSF 45-*/14.5/NPT
UL, CSA
3x16 AWG
105°C
600 V, 9 A
P-RSF 52-*/14.5/NPT
UL, CSA
5x18 AWG
105°C
600 V, 9 A
P-RSF 56-*/14.5/NPT
UL, CSA
5x18 AWG
105°C
600 V, 9 A
1. BK
2. BU
3. GN/YE
4. BN
5. WH
P-RSF 60-*/14.5/NPT
UL, CSA
5x16 AWG
105°C
600 V, 9 A
1. BU
2. BN
3. GN/YE
4. WH
5. BK
6. N/C
P-RSF 60D-*/14.5/NPT
1. WH
2. BK
3. N/C
4. GN
1/2-14NPT Threads, Drain Wire
1. BU
2. BN
3. GN/YE
4. WH
5. BK
6. GY
1/2-14NPT Threads
1. WH
2. RD
3. GN
4. OG
5. BK
6. BU
UL, CSA
6x16 AWG
105°C
600 V, 9 A
P-RSF 63-*/14.5/NPT
1. BK
2. WH
3. GY
4. BN
5. BU
1/2-14NPT Threads
See page K144 for dimensional drawings.
* Length in meters. Standard lead length is 0.3 meters. Consult factory for other lengths.
Standard housing material is nickel plated brass "P-RSF.."; "P-RSFV.." indicates 316 stainless steel.
Receptacles recommend 13/16" (21.0 mm) hole for panel mounting.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
K151
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
minifast ® Receptacles with Leads, Additional Analog or Discrete Control Circuits
• Male Receptacles
• NEMA 1, 3, 4, 6P and IEC IP 67
Protection
Housing Style
Part Number
6
P-RSF 70-*/14.5/NPT
P-RSF 80-*/14.5/NPT
Lead Specs
Features
UL, CSA
7x18 AWG
105°C
600 V, 8 A
UL, CSA
8x18 AWG
105°C
600 V, 8 A
1. BK
2. WH
3. BU
4. RD
5. YE
6. BN
7. GY
8. GN
1/2-14NPT Threads
8
P-RSF 100-*/14.5/NPT
Pinout
1. BU
2. BN
3. GY
4. WH
5. BK
6. GY
7. GN/YE
UL, CSA
10x18 AWG
105°C
600 V, 8 A
1. WH/BK
2. BK/WH
3. WH/GN
4. GN/WH
5. WH/RD
6. RD/WH
7. GY
8. GN/YE
9. WH/OG
10. OG/WH
See page K144 for dimensional drawings.
* Length in meters. Standard lead length is 0.3 meters. Consult factory for other lengths.
Standard housing material is nickel plated brass "P-RSF.."; "P-RSFV.." indicates 316 stainless steel.
Receptacles recommend 13/16" (21.0 mm) hole for panel mounting.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K152
TURCK
Process Wiring Products
minifast ® Receptacles with Leads, Additional Analog or Discrete Control Circuits
• Female Receptacles
• NEMA 1, 3, 4, 6P and IEC IP 67
Protection
Housing Style
Part Number
P-RKF 44-*/14.75/NPT
P-RKF 442-*/14.75/NPT
P-RKF 45-*/14.75/NPT
9
P-RKF 52-*/14.75/NPT
Lead Specs
Features
Pinout
1. BU
2. BN
3. WH
4. BK
UL, CSA
4x18 AWG
105°C
600 V, 9 A
UL, CSA
3x16 AWG
105°C
600 V, 9 A
1. BK
2. WH
3. RD
4. GN
1. WH
2. BK
3. N/C
4. GN
3/4-14NPT Threads
1. BK
2. WH
3. GY
4. BN
5. BU
UL, CSA
5x18 AWG
105°C
600 V, 9 A
1. BK
2. BU
3. GN/YE
4. BN
5. WH
P-RKF 56-*/14.75/NPT
P-RKF 60-*/14.75/NPT
UL, CSA
5x16 AWG
105°C
600 V, 9 A
3/4-14NPT Threads, Drain Wire
1. BU
2. BN
3. GN/YE
4. WH
5. BK
6. GY
P-RKF 60D-*/14.75/NPT
UL, CSA
6x16 AWG
105°C
600 V, 9 A
P-RKF 63-*/14.75/NPT
1. BU
2. BN
3. GN/YE
4. WH
5. BK
6. N/C
3/4-14NPT Threads
1. WH
2. RD
3. GN
4. OG
5. BK
6. BU
See page K145 for dimensional drawings.
* Length in meters. Standard lead length is 0.3 meters. Consult factory for other lengths.
Standard housing material is nickel plated brass "P-RKF.."; "P-RKFV.." indicates 316 stainless steel.
Receptacles recommend 1-1/16" (27.0 mm) hole for panel mounting.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
K153
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
minifast ® Receptacles with Leads, Additional Analog or Discrete Control Circuits
• Female Receptacles
• NEMA 1, 3, 4, 6P and IEC IP 67
Protection
Housing Style
11
Part Number
P-RKF 70-*/14.75/NPT
P-RKF 80-*/14.75/NPT
Lead Specs
Features
UL, CSA
7x18 AWG
105°C
600 V, 8 A
UL, CSA
8x18 AWG
105°C
600 V, 8 A
1. BK
2. WH
3. BU
4. RD
5. YE
6. BN
7. GY
8. GN
3/4-14NPT Threads
13
P-RKF 100-*/14.75/NPT
Pinout
1. BU
2. BN
3. GY
4. WH
5. BK
6. GY
7. GN/YE
UL, CSA
10x18 AWG
105°C
600 V, 8 A
1. WH/BK
2. BK/WH
3. WH/GN
4. GN/WH
5. WH/RD
6. RD/WH
7. GY
8. GN/YE
9. WH/OG
10. OG/WH
See page K145 for dimensional drawings.
* Length in meters. Standard lead length is 0.3 meters. Consult factory for other lengths.
Standard housing material is nickel plated brass "P-RKF.."; "P-RKFV.." indicates 316 stainless steel.
Receptacles recommend 1-1/16" (27.0 mm) hole for panel mounting.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K154
TURCK
Process Wiring Products
minifast ® Receptacles with Leads, Additional Analog or Discrete Control Circuits
• Male Receptacles
• NEMA 1, 3, 4, 6P and IEC IP 67
Protection
Housing Style
Part Number
P-RSF 44-*/14.75/NPT
P-RSF 442-*/14.75/NPT
P-RSF 45-*/14.75/NPT
10
Lead Specs
Features
Pinout
1. BU
2. BN
3. WH
4. BK
UL, CSA
4x18 AWG
105°C
600 V, 9 A
1. BK
2. WH
3. RD
4. GN
UL, CSA
3x16 AWG
105°C
600 V, 9 A
1. WH
2. BK
3. N/C
4. GN
1. BK
2. WH
3. GY
4. BN
5. BU
3/4-14NPT Threads
P-RSF 52-*/14.75/NPT
UL, CSA
5x18 AWG
105°C
600 V, 9 A
1. BK
2. BU
3. GN/YE
4. BN
5. WH
P-RSF 56-*/14.75/NPT
P-RSF 60-*/14.75/NPT
1. BU
2. BN
3. GN/YE
4. WH
5. BK
6. N/C
UL, CSA
5x16 AWG
105°C
600 V, 9 A
P-RSF 60D-*/14.75/NPT
3/4-14NPT Threads, Drain Wire
1. BU
2. BN
3. GN/YE
4. WH
5. BK
6. GY
3/4-14NPT Threads
1. WH
2. RD
3. GN
4. OG
5. BK
6. BU
UL, CSA
6x16 AWG
105°C
600 V, 8 A
P-RSF 63-*/14.75/NPT
See page K145 for dimensional drawings.
* Length in meters. Standard lead length is 0.3 meters. Consult factory for other lengths.
Standard housing material is nickel plated brass "P-RSF.."; "P-RSFV.." indicates 316 stainless steel.
Receptacles recommend 1-1/16" (27.0 mm) hole for panel mounting.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
K155
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
minifast ® Receptacles with Leads, Additional Analog or Discrete Control Circuits
• Male Receptacles
• NEMA 1, 3, 4, 6P and IEC IP 67
Protection
Housing Style
Part Number
12
P-RSF 70-*/14.75/NPT
P-RSF 80-*/14.75/NPT
Lead Specs
Features
UL, CSA
7x18 AWG
105°C
600 V, 8 A
UL, CSA
8x18 AWG
105°C
600 V, 8 A
1. BK
2. WH
3. BU
4. RD
5. YE
6. BN
7. GY
8. GN
3/4-14NPT Threads
14
P-RSF 100-*/14.75/NPT
Pinout
1. BU
2. BN
3. GY
4. WH
5. BK
6. GY
7. GN/YE
UL, CSA
10x18 AWG
105°C
600 V, 8 A
1. WH/BK
2. BK/WH
3. WH/GN
4. GN/WH
5. WH/RD
6. RD/WH
7. GY
8. GN/YE
9. WH/OG
10. OG/WH
See page K145 for dimensional drawings.
* Length in meters. Standard lead length is 0.3 meters. Consult factory for other lengths.
Standard housing material is nickel plated brass "P-RSF.."; "P-RSFV.." indicates 316 stainless steel.
Receptacles recommend 1-1/16" (27.0 mm) hole for panel mounting.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K156
TURCK
Process Wiring Products
minifast ® Receptacles with Leads, Additional Analog or Discrete Control Circuits
• Female Receptacles
• NEMA 1, 3, 4, 6P and IEC IP 67
Protection
Housing Style
Part Number
P-RKF 44-*/M20
P-RKF 442-*/M20
15
Lead Specs
Features
Pinout
1. BU
2. BN
3. WH
4. BK
UL, CSA
4x18 AWG
105°C
600 V, 9 A
1. BK
2. WH
3. RD
4. GN
P-RKF 45-*/M20
UL, CSA
3x16 AWG
105°C
600 V, 9 A
P-RKF 52-*/M20
UL, CSA
5x18 AWG
105°C
600 V, 9 A
P-RKF 56-*/M20
UL, CSA
5x18 AWG
105°C
600 V, 9 A
1. BK
2. BU
3. GN/YE
4. BN
5. WH
P-RKF 60-*/M20
UL, CSA
5x16 AWG
105°C
600 V, 9 A
1. BU
2. BN
3. GN/YE
4. WH
5. BK
6. N/C
P-RKF 60D-*/M20
1. WH
2. BK
3. N/C
4. GN
M20 Threads
M20 Threads, Drain Wire
1. BU
2. BN
3. GN/YE
4. WH
5. BK
6. GY
M20 Threads
1. WH
2. RD
3. GN
4. OG
5. BK
6. BU
UL, CSA
6x16 AWG
105°C
600 V, 9 A
P-RKF 63-*/M20
1. BK
2. WH
3. GY
4. BN
5. BU
See page K145 for dimensional drawings.
* Length in meters. Standard lead length is 0.3 meters. Consult factory for other lengths.
Standard housing material is nickel plated brass "P-RKF.."; "P-RKFV.." indicates 316 stainless steel.
Receptacles recommend 13/16" (21.0 mm) hole for panel mounting.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
K157
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
minifast ® Receptacles with Leads, Additional Analog or Discrete Control Circuits
• Female Receptacles
• NEMA 1, 3, 4, 6P and IEC IP 67
Protection
Housing Style
Part Number
17
P-RKF 70-*/M20
P-RKF 80-*/M20
Lead Specs
Features
UL, CSA
7x18 AWG
105°C
600 V, 8 A
UL, CSA
8x18 AWG
105°C
600 V, 8 A
1. BK
2. WH
3. BU
4. RD
5. YE
6. BN
7. GY
8. GN
M20 Threads
19
P-RKF 100-*/M20
Pinout
1. BU
2. BN
3. GY
4. WH
5. BK
6. GY
7. GN/YE
UL, CSA
10x18 AWG
105°C
600 V, 8 A
1. WH/BK
2. BK/WH
3. WH/GN
4. GN/WH
5. WH/RD
6. RD/WH
7. GY
8. GN/YE
9. WH/OG
10. OG/WH
See page K146 for dimensional drawings.
* Length in meters. Standard lead length is 0.3 meters. Consult factory for other lengths.
Standard housing material is nickel plated brass "P-RKF.."; "P-RKFV.." indicates 316 stainless steel.
Receptacles recommend 13/16" (21.0 mm) hole for panel mounting.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K158
TURCK
Process Wiring Products
minifast ® Receptacles with Leads, Additional Analog or Discrete Control Circuits
• Male Receptacles
• NEMA 1, 3, 4, 6P and IEC IP 67
Protection
Housing Style
Part Number
P-RSF 44-*/M20
P-RSF 442-*/M20
16
Lead Specs
Features
Pinout
1. BU
2. BN
3. WH
4. BK
UL, CSA
4x18 AWG
105°C
600 V, 9 A
1. BK
2. WH
3. RD
4. GN
P-RSF 45-*/M20
UL, CSA
3x16 AWG
105°C
600 V, 9 A
P-RSF 52-*/M20
UL, CSA
5x18 AWG
105°C
600 V, 9 A
P-RSF 56-*/M20
UL, CSA
5x18 AWG
105°C
600 V, 9 A
1. BK
2. BU
3. GN/YE
4. BN
5. WH
P-RSF 60-*/M20
UL, CSA
5x16 AWG
105°C
600 V, 9 A
1. BU
2. BN
3. GN/YE
4. WH
5. BK
6. N/C
P-RSF 60D-*/M20
1. WH
2. BK
3. N/C
4. GN
M20 Threads
M20 Threads, Drain Wire
1. BU
2. BN
3. GN/YE
4. WH
5. BK
6. GY
M20 Threads
1. WH
2. RD
3. GN
4. OG
5. BK
6. BU
UL, CSA
6x16 AWG
105°C
600 V, 9 A
P-RSF 63-*/M20
1. BK
2. WH
3. GY
4. BN
5. BU
See page K145 for dimensional drawings.
* Length in meters. Standard lead length is 0.3 meters. Consult factory for other lengths.
Standard housing material is nickel plated brass "P-RSF.."; "P-RSFV.." indicates 316 stainless steel.
Receptacles recommend 13/16" (21.0 mm) hole for panel mounting.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
K159
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
minifast ® Receptacles with Leads, Additional Analog or Discrete Control Circuits
• Male Receptacles
• NEMA 1, 3, 4, 6P and IEC IP 67
Protection
Housing Style
18
Part Number
P-RSF 70-*/M20
P-RSF 80-*/M20
Lead Specs
Features
UL, CSA
7x18 AWG
105°C
600 V, 8 A
UL, CSA
8x18 AWG
105°C
600 V, 8 A
1. BK
2. WH
3. BU
4. RD
5. YE
6. BN
7. GY
8. GN
M20 Threads
20
P-RSF 100-*/M20
Pinout
1. BU
2. BN
3. GY
4. WH
5. BK
6. GY
7. GN/YE
UL, CSA
10x18 AWG
105°C
600 V, 8 A
1. WH/BK
2. BK/WH
3. WH/GN
4. GN/WH
5. WH/RD
6. RD/WH
7. GY
8. GN/YE
9. WH/OG
10. OG/WH
See page K146 for dimensional drawings.
* Length in meters. Standard lead length is 0.3 meters. Consult factory for other lengths.
Standard housing material is nickel plated brass "P-RSF.."; "P-RSFV.." indicates 316 stainless steel.
Receptacles recommend 13/16" (21.0 mm) hole for panel mounting.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K160
TURCK
Process Wiring Products
minifast ® Explosionproof Feed-Thru Recept w/Leads, Add. Analog or Discrete Control Circuits
• Female Receptacles
• NEMA 1, 3, 4, 6P and IEC IP 67 Protection
• For installation of explosionproof devices in
Division 2 or feeding intrinsically safe circuits
into or out of explosionproof enclosures
Housing Style
21
Part Number
Lead Specs
Features
Pinout
P-RKFV 44 EX-*/14.5/NPT
UL, CSA
4x18 AWG
105°C
600 V, 9 A
1. BU
2. BN
3. WH
4. BK
P-RKFV 45 EX-*/14.5/NPT
UL, CSA
3x16 AWG
105°C
600 V, 9 A
1. WH
2. BK
3. N/C
4. GN
P-RKFV 52 EX-*/14.5/NPT
UL, CSA
5x18 AWG
105°C
600 V, 9 A
1. BK
2. WH
3. GY
4. BN
5. BU
P-RKFV 55 EX-*/14.5/NPT
UL, CSA
4x16 AWG
105°C
600 V, 9 A
1. WH
2. BK
3. GN
4. RD
5. N/C
P-RKFV 56 EX-*/14.5/NPT
UL, CSA
5x18 AWG
105°C
600 V, 9 A
1. BK
2. BU
3. GN/YE
4. BN
5. WH
Explosionproof Receptacle,
1/2-14NPT Threads
See page K146 for dimensional drawings.
* Length in meters. Standard lead length is 0.3 meters. Consult factory for other lengths.
Standard housing material is 316 stainless steel.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
K161
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
minifast ® Explosionproof Feed-Thru Recept w/Leads, Add. Analog or Discrete Control Circuits
• Female Receptacles
• NEMA 1, 3, 4, 6P and IEC IP 67 Protection
• For installation of explosionproof devices in
Division 2 or feeding intrinsically safe circuits
into or out of explosionproof enclosures
Housing Style
21
Part Number
Lead Specs
Features
Pinout
Explosionproof Receptacle,
1/2-14NPT Threads
1. BU
2. BN
3. GN/YE
4. WH
5. BK
6. N/C
Explosionproof Receptacle,
1/2-14NPT Threads, Drain Wire
1. BU
2. BN
3. GN/YE
4. WH
5. BK
6. GY
P-RKFV 60 EX-*/14.5/NPT
UL, CSA
5x16 AWG
105°C
600 V, 9 A
P-RKFV 60D EX-*/14.5/NPT
UL, CSA
6x16 AWG
105°C
600 V, 9 A
P-RKFV 63 EX-*/14.5/NPT
UL, CSA
6x16 AWG
105°C
600 V, 9 A
1. WH
2. RD
3. GN
4. OG
5. BK
6. BU
P-RKFV 65 EX-*/14.5/NPT
UL, CSA
5x16 AWG
105°C
600 V, 9 A
1. BK
2. BU
3. GN/YE
4. BN
5. WH
6. N/C
P-RKFV 66 EX-*/14.5/NPT
UL, CSA
5x18 AWG
105°C
600 V, 9 A
Explosionproof Receptacle,
1/2-14NPT Threads
1. BU
2. BN
3. GN/YE
4. WH
5. BK
6. N/C
See page K146 for dimensional drawings.
* Length in meters. Standard lead length is 0.3 meters. Consult factory for other lengths.
Standard housing material is 316 stainless steel.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K162
TURCK
Process Wiring Products
minifast ® Explosionproof Feed-Thru Recept w/Leads, Add. Analog or Discrete Control Circuits
• Male Receptacles
• NEMA 1, 3, 4, 6P and IEC IP 67 Protection
• For installation of explosionproof devices in
Division 2 or feeding intrinsically safe circuits
into or out of explosionproof enclosures
Housing Style
22
Part Number
Lead Specs
Features
Pinout
P-RSFV 44 EX-*/14.5/NPT
UL, CSA
4x18 AWG
105°C
600 V, 9 A
1. BU
2. BN
3. WH
4. BK
P-RSFV 45 EX-*/14.5/NPT
UL, CSA
3x16 AWG
105°C
600 V, 9 A
1. WH
2. BK
3. N/C
4. GN
P-RSFV 52 EX-*/14.5/NPT
UL, CSA
5x18 AWG
105°C
600 V, 9 A
1. BK
2. WH
3. GY
4. BN
5. BU
P-RSFV 55 EX-*/14.5/NPT
UL, CSA
4x16 AWG
105°C
600 V, 9 A
1. WH
2. BK
3. GN
4. RD
5. N/C
P-RSFV 56 EX-*/14.5/NPT
UL, CSA
5x18 AWG
105°C
600 V, 9 A
1. BK
2. BU
3. GN/YE
4. BN
5. WH
Explosionproof Receptacle,
1/2-14NPT Threads
See page K146 for dimensional drawings.
* Length in meters. Standard lead length is 0.3 meters. Consult factory for other lengths.
Standard housing material is 316 stainless steel.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
K163
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
minifast ® Explosionproof Feed-Thru Recept w/Leads, Add. Analog or Discrete Control Circuits
• Male Receptacles
• NEMA 1, 3, 4, 6P and IEC IP 67 Protection
• For installation of explosionproof devices in
Division 2 or feeding intrinsically safe circuits
into or out of explosionproof enclosures
Housing Style
22
Part Number
Lead Specs
Features
Pinout
Explosionproof Receptacle,
1/2-14NPT Threads
1. BU
2. BN
3. GN/YE
4. WH
5. BK
6. N/C
Explosionproof Receptacle,
1/2-14NPT Threads, Drain Wire
1. BU
2. BN
3. GN/YE
4. WH
5. BK
6. GY
P-RSFV 60 EX-*/14.5/NPT
UL, CSA
5x16 AWG
105°C
600 V, 9 A
P-RSFV 60D EX-*/14.5/NPT
UL, CSA
6x16 AWG
105°C
600 V, 9 A
P-RSFV 63 EX-*/14.5/NPT
UL, CSA
6x16 AWG
105°C
600 V, 9 A
1. WH
2. RD
3. GN
4. OG
5. BK
6. BU
P-RSFV 65 EX-*/14.5/NPT
UL, CSA
5x16 AWG
105°C
600 V, 9 A
1. BK
2. BU
3. GN/YE
4. BN
5. WH
6. N/C
P-RSFV 66 EX-*/14.5/NPT
UL, CSA
5x18 AWG
105°C
600 V, 9 A
Explosionproof Receptacle,
1/2-14NPT Threads
1. BU
2. BN
3. GN/YE
4. WH
5. BK
6. N/C
See page K146 for dimensional drawings.
* Length in meters. Standard lead length is 0.3 meters. Consult factory for other lengths.
Standard housing material is 316 stainless steel.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K164
TURCK
Process Wiring Products
minifast ® Explosionproof Feed-Thru Recept w/Leads, Add. Analog or Discrete Control Circuits
• Female Receptacles
• NEMA 1, 3, 4, 6P and IEC IP 67 Protection
• For installation of explosionproof devices in
Division 2 or feeding intrinsically safe circuits
into or out of explosionproof enclosures
Housing Style
23
Part Number
Lead Specs
Features
Pinout
P-RKFV 44 EX-*/14.75/NPT
UL, CSA
4x18 AWG
105°C
600 V, 9 A
1. BU
2. BN
3. WH
4. BK
P-RKFV 45 EX-*/14.75/NPT
UL, CSA
3x16 AWG
105°C
600 V, 9 A
1. WH
2. BK
3. N/C
4. GN
P-RKFV 52 EX-*/14.75/NPT
UL, CSA
5x18 AWG
105°C
600 V, 9 A
1. BK
2. WH
3. GY
4. BN
5. BU
P-RKFV 55 EX-*/14.75/NPT
UL, CSA
4x16 AWG
105°C
600 V, 9 A
1. WH
2. BK
3. GN
4. RD
5. N/C
P-RKFV 56 EX-*/14.75/NPT
UL, CSA
5x18 AWG
105°C
600 V, 9 A
1. BK
2. BU
3. GN/YE
4. BN
5. WH
Explosionproof Receptacle,
3/4-14NPT Threads
See page K146 for dimensional drawings.
* Length in meters. Standard lead length is 0.3 meters. Consult factory for other lengths.
Standard housing material is 316 stainless steel.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
K165
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
minifast ® Explosionproof Feed-Thru Recept w/Leads, Add. Analog or Discrete Control Circuits
• Female Receptacles
• NEMA 1, 3, 4, 6P and IEC IP 67 Protection
• For installation of explosionproof devices in
Division 2 or feeding intrinsically safe circuits
into or out of explosionproof enclosures
Housing Style
23
Part Number
Lead Specs
Features
Pinout
Explosionproof Receptacle,
3/4-14NPT Threads
1. BU
2. BN
3. GN/YE
4. WH
5. BK
6. N/C
Explosionproof Receptacle,
3/4-14NPT Threads, Drain Wire
1. BU
2. BN
3. GN/YE
4. WH
5. BK
6. GY
P-RKFV 60 EX-*/14.75/NPT
UL, CSA
5x16 AWG
105°C
600 V, 9 A
P-RKFV 60D EX-*/14.75/NPT
UL, CSA
6x16 AWG
105°C
600 V, 9 A
P-RKFV 63 EX-*/14.75/NPT
UL, CSA
6x16 AWG
105°C
600 V, 9 A
1. WH
2. RD
3. GN
4. OG
5. BK
6. BU
P-RKFV 65 EX-*/14.75/NPT
UL, CSA
5x16 AWG
105°C
600 V, 9 A
1. BK
2. BU
3. GN/YE
4. BN
5. WH
6. N/C
P-RKFV 66 EX-*/14.75/NPT
UL, CSA
5x18 AWG
105°C
600 V, 9 A
Explosionproof Receptacle,
3/4-14NPT Threads
1. BU
2. BN
3. GN/YE
4. WH
5. BK
6. N/C
See page K146 for dimensional drawings.
* Length in meters. Standard lead length is 0.3 meters. Consult factory for other lengths.
Standard housing material is 316 stainless steel.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K166
TURCK
Process Wiring Products
minifast ® Explosionproof Feed-Thru Recept w/Leads, Add. Analog or Discrete Control Circuits
• Male Receptacles
• NEMA 1, 3, 4, 6P and IEC IP 67 Protection
• For installation of explosionproof devices in
Division 2 or feeding intrinsically safe circuits
into or out of explosionproof enclosures
Housing Style
24
Part Number
Lead Specs
Features
Pinout
P-RSFV 44 EX-*/14.75/NPT
UL, CSA
4x18 AWG
105°C
600 V, 9 A
1. BU
2. BN
3. WH
4. BK
P-RSFV 45 EX-*/14.75/NPT
UL, CSA
3x16 AWG
105°C
600 V, 9 A
1. WH
2. BK
3. N/C
4. GN
P-RSFV 52 EX-*/14.75/NPT
UL, CSA
5x18 AWG
105°C
600 V, 9 A
1. BK
2. WH
3. GY
4. BN
5. BU
P-RSFV 55 EX-*/14.75/NPT
UL, CSA
4x16 AWG
105°C
600 V, 9 A
1. WH
2. BK
3. GN
4. RD
5. N/C
P-RSFV 56 EX-*/14.75/NPT
UL, CSA
5x18 AWG
105°C
600 V, 9 A
1. BK
2. BU
3. GN/YE
4. BN
5. WH
Explosionproof Receptacle,
3/4-14NPT Threads
See page K146 for dimensional drawings.
* Length in meters. Standard lead length is 0.3 meters. Consult factory for other lengths.
Standard housing material is 316 stainless steel.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
K167
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
minifast ® Explosionproof Feed-Thru Recept w/Leads, Add. Analog or Discrete Control Circuits
• Male Receptacles
• NEMA 1, 3, 4, 6P and IEC IP 67 Protection
• For installation of explosionproof devices in
Division 2 or feeding intrinsically safe circuits
into or out of explosionproof enclosures
Housing Style
Part Number
Lead Specs
Features
Pinout
Explosionproof Receptacle,
3/4-14NPT Threads
1. BU
2. BN
3. GN/YE
4. WH
5. BK
6. N/C
Explosionproof Receptacle,
3/4-14NPT Threads, Drain Wire
1. BU
2. BN
3. GN/YE
4. WH
5. BK
6. GY
P-RSFV 60 EX-*/14.75/NPT
UL, CSA
5x16 AWG
105°C
600 V, 9 A
P-RSFV 60D EX-*/14.75/NPT
UL, CSA
6x16 AWG
105°C
600 V, 9 A
P-RSFV 63 EX-*/14.75/NPT
UL, CSA
6x16 AWG
105°C
600 V, 9 A
1. WH
2. RD
3. GN
4. OG
5. BK
6. BU
P-RSFV 65 EX-*/14.75/NPT
UL, CSA
5x16 AWG
105°C
600 V, 9 A
1. BK
2. BU
3. GN/YE
4. BN
5. WH
6. N/C
P-RSFV 66 EX-*/14.75/NPT
UL, CSA
5x18 AWG
105°C
600 V, 9 A
24
Explosionproof Receptacle,
3/4-14NPT Threads
1. BU
2. BN
3. GN/YE
4. WH
5. BK
6. N/C
See page K146 for dimensional drawings.
* Length in meters. Standard lead length is 0.3 meters. Consult factory for other lengths.
Standard housing material is 316 stainless steel.
Note: See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd for guidance on installation in hazardous locations.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K168
TURCK
Process Wiring Products
minifast ® "Y" Fittings, Additional Analog or Discrete Circuits
• 600 V
• Installs in Standard Conduit Entries
• 9 A Per Conductor
• Stainless Steel Housing
1/2-14NPT
Specifications
4/18 AWG leads
per connector
Wiring Housing
Dia. Material
1
SS
3/4-14NPT
J1
J2
P1
P2
P1
J2
J1
J2
Female
Female
Male
Male
Male
Female
Female
Female
P-2RKFV-44EX-*/14.5/NPT
P-2RSFV-44EX-*/14.5/NPT
P-RSFV RKFV-44EX-*/14.5/NPT
P-2RKFV-44EX-*/14.75/NPT
* Length in meters.
SS = Stainless steel
Dimensions
Wiring Diagram
1
K169
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
Specifications
Housing:
Contact Carrier:
Electrical Ratings:
Temperature:
Contacts:
Protection:
Leads:
316 stainless steel (SS), passivated.
PUR black.
600 V, 9 A per conductor.
-30° to +105°C (-22° to +221°F).
Gold plated brass.
IP 67 (only when all receptacles are mated or covered with plugs).
High flex stranding, PVC, insulated, 600 V, UL recognized, CSA certified.
3/4-14NPT
M20x1.5
P1
P2
P1
J2
J1
J2
P1
P2
P1
J2
Male
Male
Male
Female
Female
Female
Male
Male
Male
Female
P-2RSFV-44EX-*/14.75/NPT
P-RSFV RKFV-44EX-*/14.75/NPT
P-2RKFV-44EX-*/M20
P-2RSFV-44EX-*/M20
P-RSFV RKFV-44EX-*/M20
Dimensions
Pinouts
Female
Male
4-Pin
4-Pin
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K170
TURCK
Process Wiring Products
multibox ® minifast ® Metal Junction Boxes
• Consolidation of Analog or Discrete Circuits in Hazardous Locations or Unclassified
Locations
FM approved for installation in hazardous locations when installed per TURCK Control
Drawing QCF-00147 (www.turck.com/fmcd) using specified accessory equipment.
"/C" versions CSA certified for installation in hazardous locations when installed per TURCK
Control Drawing Ni-2.404(www.turck.com/fmcd) using certified accessory equipment.
4-port, Common Ground and Shield
Application
4-port cast aluminum
junction box, minifast
port connectors,
multifast ® home-run
connector, 4-wire
discrete signal per port
4-port cast aluminum
junction box, minifast
port connectors,
multifast home-run
connector, 2 analog
signals per port
Specifications
19-pin multifast connector,
19 conductors
19-pin multifast connector,
16 conductors plus drain
Pinout
Nickel Plated Brass
Port, Pin
Port 1, Pin 1
Port 1, Pin 2
Port 1, Pin 4
Port 1, Pin 5
Port 2, Pin 1
NC
Port 2, Pin 2
Port 2, Pin 4
Port 2, Pin 5
Port 3, Pin 1
Home-Run
1
2
3
4
5
6
7
8
9
10
Port, Pin
Port 3, Pin 2
Ports 1-8, Pin 3
Port 3, Pin 4
Port 3, Pin 5
Port 4, Pin 1
Port 4, Pin 2
Port 4, Pin 4
Port 4, Pin 5
NC
Home-Run
11
12
13
14
15
16
17
18
19
Port, Pin
Port 1, Pin 1
Port 1, Pin 2
Port 1, Pin 4
Port 1, Pin 5
Port 2, Pin 1
Shield
Port 2, Pin 2
Port 2, Pin 4
Port 2, Pin 5
Port 3, Pin 1
Home-Run
1
2
3
4
5
6
7
8
9
10
Port, Pin
Port 3, Pin 2
Ground
Port 3, Pin 4
Port 3, Pin 5
Port 4, Pin 1
Port 4, Pin 2
Port 4, Pin 4
Port 4, Pin 5
NC
Home-Run
11
12
13
14
15
16
17
18
19
Stainless Steel
P-4 RKF 56-CS19
P-4 RKFV 56-CSV19
P-4 RKF 56-CS19/C
P-4 RKFV 56-CSV19/C
P-4 RKF 66-CS19
P-4 RKFV 66-CSV19
P-4 RKF 66-CS19/C
P-4 RKFV 66-CSV19/C
See pages K85 and K89 for mating home run cordsets.
Wiring Diagrams
4-Wire Discrete
K171
2 Analog Signals Per Port
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
Specifications
Housing:
Connectors
Temperature:
Contacts:
Protection:
Electrical Rating:
Die-cast aluminum alloy.
Nickel plated brass or 316 stainless steel housings (see table), oil resistant PUR contact carrier.
-30° to +80°C (-22° to +176°F).
Gold plated brass.
IP 67.
Standard Version: 150 V, 4 A per conductor.
"/C" Versions:
30 V, 600 mA
Dimensions
4-Port
Notes:
1. Clearance hole for 1/4-20 mounting screws (2 not included)
Pinouts
Female
6-Pin minifast ®
5-Pin minifast
Male
19-Pin multifast
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K172
TURCK
Process Wiring Products
multifast ® Home Run Cordsets, Additional Analog or Discrete Control Circuits
• Female Connectors
• IEC IP 67 Protection
Housing Style
Part Number
Cable
Features
Pinout
P-CKM ..
P-CKML .. (for Class I, Division 2
applications)
P-CKM 12-088-*
ITC/PLTC PVC Yellow
11x18 AWG
Foil/Drain (20)
105°C
10 mm OD
300 V, 6 A
Cable #RF51088-*M†
P-CKWM ..
P-CKWML .. (for Class I, Division 2
applications)
Discrete control circuits in
Class I, Division 2
hazardous locations or
unclassified locations.
1. BN
2. N/C
3. BU
4. WH
5. GN
6. YE
7. GY
8. PK
9. RD
10. BK
11. VT
12. GN/YE
P-CKWM 12-088-*
* Length in meters. Standard cable lengths are 2, 4, 6, 8, and 10 meters. Consult factory for other lengths.
Standard coupling nut material is nickel plated brass "CKM(L).."/"CKWM(L).."; "CKM(L)V.."/"CKWM(L)V" indicates 316 stainless steel.
†
See pages K236 - K244 for reelfast ® cable information.
K173
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
multifast ® Home Run Cordsets, Additional Analog or Discrete Control Circuits
• Male Connectors
• IEC IP 67 Protection
Housing Style
Part Number
Cable
Features
Pinout
P-CSM ..
P-CSML .. (for Class I, Division 2
applications)
P-CSM 12-088-*
ITC/PLTC PVC Yellow
11x18 AWG
Foil/Drain (20)
105°C
10 mm OD
300 V, 6 A
Cable #RF51088-*M†
P-CSWM ..
P-CSWML .. (for Class I, Division 2
applications)
Discrete control
circuits in Class I,
Division 2
hazardous
locations or
unclassified
locations.
1. BN
2. N/C
3. BU
4. WH
5. GN
6. YE
7. GY
8. PK
9. RD
10. BK
11. VT
12. GN/YE
P-CSWM 12-088-*
* Length in meters. Standard cable lengths are 2, 4, 6, 8, and 10 meters. Consult factory for other lengths.
Standard coupling nut material is nickel plated brass "CSM(L).."/"CSWM(L).."; "CSM(L)V.."/"CSWM(L)V" indicates 316 stainless steel.
†
See pages K236 - K244 for reelfast ® cable information.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K174
TURCK
Process Wiring Products
Notes:
K175
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
NAMUR Circuits Selection Guide
M12 eurofast ® Thread
Drop Cordsets
2-Branch Molded Junctions
Junction Boxes
Pages
D179 - D182
D183 - D186
D187 - D190
M23 multifast ® Thread
Cordsets
Pages
D191 - D193
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K176
TURCK
Process Wiring Products
eurofast ® NAMUR Cordset Part Number Key, Class I, Division 1 Hazardous Locations
Part Number Keys are to assist in IDENTIFICATION ONLY. Consult factory for catalog items not identified.
R K
4.21 T - 2 - RS 4.21T
eurofast
Varieties
R = Straight
(Blank) = PVC Jacket
W = Right Angle
/S.. = Consult Factory, Special
/S90 = PUR Jacket
Gender
K = Female Connector
Insertion Point of Extension Cable and 2nd Prefix*
S = Male Connector
* Female Connector Listed 1st, Male Connector 2nd
Example: RK 4.21T-2-RS 4.21T
Body Plug Style
(Blank) = Standard Plug Body
Length in Meters
C = Medium Plug Body
Coupling Nut Options
(Blank) = Nickel Plated Brass
T = T Barb Fitting
V = 316 Stainless Steel
Number of Wires / AWG / Color Codes
4.21 = 2x20 AWG, BU, BN
4.41 = 4x22 AWG, BN, WH, BU, BK
5 = 5x22 AWG, GN, WH, OG, BK, RD
6 = 5x24 AWG, OG, RD, YE, BK, BU
Single Ended Example:
R K
4.21 T - 2
RK ..
Extension Example:
R K
4.21 T - 2 - RS
4.21 T
RK .. - RS ..
K177
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
eurofast ® NAMUR Cordset Extensions
Other Extension Examples:
W K
4.21 T - 2 - RS
4.21 T
R K
4.21 T - 2 - WS
4.21 T
W K
4.21 T - 2 - WS
4.21 T
WK .. - RS ..
RK .. - WS ..
WK .. - WS ..
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K178
TURCK
Process Wiring Products
2, 4, 5 and 6-Wire eurofast ® Drop Cordsets, NAMUR
• Straight Female Connectors
• For Use With NAMUR Sensors
• NEMA 1, 3, 4, 6P and IEC IP 68
Protection
Housing Style
Part Number
RK ..
Cable
Features
Pinout
AWM PVC NAMUR Blue
2x20 AWG
105°C
5.2 mm OD
Cable #RF20003-*M†
flexlife ®
RK 4.21T-*/S90
AWM PUR NAMUR Blue
2x20 AWG
105°C
5.2 mm OD
Cable #RF50657-*M†
Cut/Abrasion Immune
RK 4.41T-*
AWM PVC NAMUR Blue
4x22 AWG
105°C
5.2 mm OD
Cable #RF50598-*M†
flexlife
1. BN
2. WH
3. BU
4. BK
RKCN 5T-*
PLTC PVC NAMUR Blue
5x22 AWG
105°C
6.8 mm OD
Cable #RF50767-*M†
flexlife, 22 AWG, Over 2
million cycles, for VBN
40-H1141 multibox
1. GN
2. WH
3. OG
4. BK
5. RD
RKC 6T-*/S90/CS10476
AWM PUR NAMUR Blue
5x24 AWG Foil/Drain
105°C
60 VAC/75 VDC, 2 A
5.7 mm OD
Cable #RF50928-*M†
Cut/Abrasion Immune
1. OR
2. RD
3. YE
4. BK
5. BU
6. Drain
RK 4.21T-*
RKC ..
1. BN
2. BU
3. N/C
4. N/C
* Length in meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.
Standard coupling nut material is nickel plated brass "RK©)"; "RK(C)V.." indicates 316 stainless steel.
†
See pages K236 - K244 for reelfast ® cable information.
K179
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
2, 4, 5 and 6-Wire eurofast ® Drop Cordsets, NAMUR
• Straight Male Connectors
• For Use With NAMUR Sensors
• NEMA 1, 3, 4, 6P and IEC IP 68
Protection
Housing Style
RS ..
Part Number
Cable
Features
Pinout
AWM PVC NAMUR Blue
2x20 AWG
105°C
5.2 mm OD
Cable #RF20003-*M†
flexlife ®
RS 4.21T-*/S90
AWM PUR NAMUR Blue
2x20 AWG
105°C
5.2 mm OD
Cable #RF50657-*M†
Cut/Abrasion Immune
RS 4.41T-*
AWM PVC NAMUR Blue
4x22 AWG
105°C
5.2 mm OD
Cable #RF50598-*M†
flexlife
1. BN
2. WH
3. BU
4. BK
RSCN 5T-*
PLTC PVC NAMUR Blue
5x22 AWG
105°C
6.8 mm OD
Cable #RF50767-*M†
flexlife, 22 AWG, Over 2
million cycles, for VBN
40-H1141 multibox
1. GN
2. WH
3. OG
4. BK
5. RD
RSC 6T-*/S90/CS10476
AWM PUR NAMUR Blue
5x24 AWG Foil/Drain
105°C
60 VAC/75 VDC, 2 A
5.7 mm OD
Cable #RF50928-*M†
Cut/Abrasion Immune
1. OG
2. RD
3. YE
4. BK
5. BU
6. Drain
RS 4.21T-*
RSC ..
1. BN
2. BU
3. N/C
4. N/C
* Length in meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.
Standard coupling nut material is nickel plated brass "RS©)"; "RS(C)V.." indicates 316 stainless steel.
†
See pages K236 - K244 for reelfast ® cable information.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K180
TURCK
Process Wiring Products
2, 4, 5 and 6-Wire eurofast ® Drop Cordsets, NAMUR
• Right Angle Female Connectors
• For Use With NAMUR Sensors
• NEMA 1, 3, 4, 6P and IEC IP 68
Protection
Housing Style
Part Number
Cable
Features
Pinout
AWM PVC NAMUR Blue
2x20 AWG
105°C
5.2 mm OD
Cable #RF20003-*M†
flexlife ®
WK 4.21T-*/S90
AWM PUR NAMUR Blue
2x20 AWG
105°C
5.2 mm OD
Cable #RF50657-*M†
Cut/Abrasion Immune
WK 4.41T-*
AWM PVC NAMUR Blue
4x22 AWG
105°C
5.2 mm OD
Cable #RF50598-*M†
flexlife
1. BN
2. WH
3. BU
4. BK
WKCN 5T-*
PLTC PVC NAMUR Blue
5x22 AWG
105°C
6.8 mm OD
Cable #RF50767-*M†
flexlife, 22 AWG, Over 2
million cycles, for VBN
40-H1141 multibox
1. GN
2. WH
3. OG
4. BK
5. RD
WKC 6T-*/S90/CS10476
AWM PUR NAMUR Blue
5x24 AWG Foil/Drain
105°C
60 VAC/75 VDC, 2 A
5.7 mm OD
Cable #RF50928-*M†
Cut/Abrasion Immune
1. OG
2. RD
3. YE
4. BK
5. BU
6. Drain
WK ..
WK 4.21T-*
WKC ..
1. BN
2. BU
3. N/C
4. N/C
* Length in meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.
Standard coupling nut material is nickel plated brass "WK©)"; "WK(C)V.." indicates 316 stainless steel.
†
See pages K236 - K244 for reelfast ® cable information.
K181
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
2, 4, 5 and 6-Wire eurofast ® Drop Cordsets, NAMUR
• Right Angle Male Connectors
• For Use With NAMUR Sensors
• NEMA 1, 3, 4, 6P and IEC IP 67
Protection
Housing Style
Part Number
Cable
Features
Pinout
AWM PVC NAMUR Blue
2x20 AWG
105°C
5.2 mm OD
Cable #RF20003-*M†
flexlife ®
WS 4.21T-*/S90
AWM PUR NAMUR Blue
2x20 AWG
105°C
5.2 mm OD
Cable #RF50657-*M†
Cut/Abrasion Immune
WS 4.41T-*
AWM PVC NAMUR Blue
4x22 AWG
105°C
5.2 mm OD
Cable #RF50598-*M†
flexlife
1. BN
2. WH
3. BU
4. BK
WSCN 5T-*
PLTC PVC NAMUR Blue
5x22 AWG
105°C
6.8 mm OD
Cable #RF50767-*M†
flexlife, 22 AWG, Over 2
million cycles, for VBN
40-H1141 multibox
1. GN
2. WH
3. OG
4. BK
5. RD
WSC 6T-*/S90/CS10476
AWM PUR NAMUR Blue
5x24 AWG Foil/Drain
105°C
60 VAC/75 VDC, 2 A
5.7 mm OD
Cable #RF50928-*M†
Cut/Abrasion Immune
1. OG
2. RD
3. YE
4. BK
5. BU
6. Drain
WS ..
WS 4.21T-*
WSC ..
1. BN
2. BU
3. N/C
4. N/C
* Length in meters. Standard cable lengths are 2, 4, 5, 6, 8 and 10 meters. Consult factory for other lengths.
Standard coupling nut material is nickel plated brass "WS©)"; "WS(C)V.." indicates 316 stainless steel.
†
See pages K236 - K244 for reelfast ® cable information.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K182
TURCK
Process Wiring Products
eurofast ® 2 - Branch Molded Junctions, NAMUR Wiring
• Combine Two NAMUR Sensors
into One Cable
• Tough Polyurethane Construction
• For use with NAMUR Junction
Boxes
Application
Specifications
Wiring
Housing
Part Number
Combine 2 NAMUR
sensors into one
cable
250 V
4A
VB2-FSM 4.41/2FKM 4.21
Combine 2 NAMUR
sensors into one
cable
250 V
4A
RS 4.41T = Blue PVC
5.2 mm OD, 4/22 AWG
VB2-RS 4.41T-*/2FKM 4.21
Combine 2 NAMUR
sensors into one
cable
250 V
4A
RK 4.21T = Blue PVC
5.2 mm OD, 2/20 AWG
Combine 2 NAMUR
sensors into one
cable
250 V
4A
Blue PVC, 5.2 mm OD
RK 4.21T – 2/20 AWG
RS 4.41T – 4/22 AWG
NAMUR
VB2-FSM 4.41/2RK 4.21T-*/*
VB2-RS 4.41T-*/2RK 4.21T-*/*
* Length in meters.
NAMUR Diagram
K183
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
Junction Body:
Connector:
Contacts:
Coupling Nuts:
Cable:
Temperature:
Protection:
Oil resistant yellow polyurethane.
Oil resistant polyurethane body material, Nylon or PUR contact carrier, spacings to VDE 0110 Group C.
Gold plated brass.
Nickel plated brass.
See table.
-40° to +105°C (-40° to +221°F).
NEMA 1,3,4,6P and IEC IP 68.
Cable Length: Trunk - nominal 1 meter. Branches - nominal 0.3 meters. Other lengths available by request - consult factory.
Connector Options: (for legs with cable)
Stainless steel coupling nut add “V” to part number (RS to RSV, RK to RKV).
Nylon coupling nut add “K” to part number (RS to RSK, RK to RKK).
Right angle connectors, change part number (RS to WS, RK to WK).
Notes: Mounting holes accept #8 screw.
VB2-FSM 4.41/2FKM 4.21
VB2-RS 4.41T-*/2RK 4.21T-*/*
VB2-FSM 4.41/2RK 4.21T-*/*
VB2-RS 4.41T-*/2FKM 4.21
Pinouts
Female
Male
4-Pin eurofast ®
4-Pin eurofast
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K184
TURCK
Process Wiring Products
eurofast ® 2 - Branch Molded Junctions, NAMUR Wiring
• Combine Two NAMUR Sensors
into One Cable
• eurofast Connection Features
Anti-Vibration Coupling Nut
(main leg only)
Application
Specifications
Combine 2 NAMUR
sensors into one cable.
Connects directly to
eurofast junction box.
250 V
4A
2/20 AWG
Blue PVC
5.2 mm OD
Wiring
Housing
NAMUR
Part Number
VBRS 4.41-2RK 4.21T-*/*
* Length in meters.
To add mounting hole; add /S857 to the end of the part number.
NAMUR Diagram
K185
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
Connector:
Contacts:
Coupling Nuts:
Cable:
Conductors:
Temperature:
Protection:
Accessories:
Oil resistant yellow polyurethane Nylon or PUR contact carrier, spacings to VDE 0110 Group C.
Gold plated brass, machined from solid stock.
Nickel plated brass.
See table.
High flex stranding, PVC insulation.
-40° to +105°C (-40° to +221°F).
NEMA 1, 3, 4, 6P and IEC IP 67.
KS 5/10 labels included.
Cable Length: Branches - nominal 0.3 meters. Other lengths available by request - consult factory.
VBRS 4.41-2RK 4.21T-*/*
Pinouts
Female
Male
4-Pin eurofast ®
4-Pin eurofast
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K186
TURCK
Process Wiring Products
multibox ® eurofast ® Junction Boxes, NAMUR, 1 Circuit Per Port
• 4 Port
• Rugged Plastic Housing with
• Quick Disconnect or Integral Home Run Cable
• For use with NAMUR Sensors
Flush Connectors
1 Circuit Per Port, Common Positive, 100 VDC
Application
Specifications
4-port J-box
1 circuit per port
Integral cable
4 A/port, 9 A total
Blue PVC cable, PLTC
5/22 AWG
4-port J-box
1 circuit per port
eurofast connector
4 A/port, 4 A total
5-pin eurofast connector
5 conductors
Mates with RKCN 5T-*
Pinout
Part Number
Function
+V
Color
GN
Function
J1/Pin 2
J2/Pin 2
J3/Pin 2
J4/Pin 2
Color
WH
OG
BK
RD
Function
+V
Pin / Color
1/GN
Function
J1/Pin 2
J2/Pin 2
J3/Pin 2
J4/Pin 2
Pin / Color
2/WH
3/OG
4/BK
5/RD
VB 40N-*
VB 40N-H1151
1 Circuit Per Port, Isolated Circuits, 100 VDC
Application
Specifications
Pinout
4-port J-box
1 circuit per port
Integral cable
4 A/port, 9 A total
Blue PVC cable, PLTC
9/22 AWG
4-port J-box
1 circuit per port
multifast ® connector
4 A/port, 8 A total
12-pin multifast connector
9 conductors
Mates with CKNWM 12-9-*
Part Number
Function
J1/Pin 1
J1/Pin 2
J2/Pin 1
J2/Pin 2
Color
WH
BK
GN
RD
Brown not used
Function
J3/Pin 1
J3/Pin 2
J4/Pin 1
J4/Pin 2
Color
OG
BU
YE
VT
Function
J1/Pin 1
J1/Pin 2
J2/Pin 1
J2/Pin 2
Pin / Color
2/WH
3/BK
4/GN
5/RD
Pin 1/Bn not used
Function
J3/Pin 1
J3/Pin 2
J4/Pin 1
J4/Pin 2
Pin / Color
6/OG
7/BU
8/YE
9/VT
VB 4X1N-*
VB 4X1N-CS12
Functional Wiring Diagrams
K187
Common Positive
Integral Cable
Common Positive
eurofast Connector
Isolated Circuit
Integral Cable
Isolated Circuit
multifast Connector
VB 40N-*
VB 40N-H1151
VB 4X1N-*
VB 4X1N-CS12
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
Specifications
Housing:
Connectors:
Contacts:
Thread Inserts:
Cable:
Temperature:
Protection:
Accessories:
Nylon.
eurofast ®: Nylon or PUR, spacings to VDE 0110 Group C.
Gold plated brass, machined from solid stock.
Nickel plated brass.
See table.
-30° to +80°C (-22° to +176°F).
NEMA 1, 3, 4, 6P and IEC IP 67.
(2) VZ 3 closure caps and one VZ 1 label kit (8 labels) included.
Cable Length:
Standard length for junction boxes and multifast ® series quick disconnect cordsets is nominal 5 meters.
Other lengths available by request. Consult factory.
Dimensions
VB 40N-*
VB 4X1N-*
VB 4X1N-CS12
VB 40N-H1151
Notes:
1. Removable labels included (Part number VZ 1).
2. Clearance hole for #8 screw (3 places).
3. Housings with integral cable: 23.0 mm thickness. Housings with quick disconnect: 33.0 mm thickness.
Pinout Diagram
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K188
TURCK
Process Wiring Products
multibox ® eurofast ® Junction Boxes, NAMUR, 2 Circuits Per Port
• 4 Ports
• Rugged Plastic Housing with
• Quick Disconnect or Integral Home Run Cable
• For use with NAMUR Sensors
Flush Connectors
2 Circuits Per Port, Common Positive, 100 VDC
Application
Specifications
Pinout
Part Number
4-port J-box
2 circuits per port
Integral cable
4 A/port, 9 A total
Blue PVC cable, PLTC
9/22 AWG
Function
V+
J1/Pin 2
J1/Pin 4
J2/Pin 2
J2/Pin 4
Color
BN
WH
BK
GN
RD
Function
J3/Pin 2
J3/Pin 4
J4/Pin 2
J4/Pin 4
Color
OG
BU
YE
VT
4-port J-box
2 circuits per port
multifast ® connector
4 A/port, 8 A total
12-pin multifast connector
9 conductors
Mates with CKNWM 12-9-*
Function
V+
J1/Pin 2
J1/Pin 4
J2/Pin 2
J2/Pin 4
Pin / Color
1/BN
2/WH
3/BK
4/GN
5/RD
Function
J3/Pin 2
J3/Pin 4
J4/Pin 2
J4/Pin 4
Pin / Color
6/OG
7/BU
8/YE
9/VT
VB 40.5N-*
VB 40.5N-CS12
2 Circuits Per Port, Isolated Circuits, 100 VDC
Application
4-port J-box
2 circuits per port
Integral cable
4-port J-box
2 circuits per port
multifast connector
Specifications
Pinout
Part Number
4 A/port, 9 A total
Blue PVC cable, PLTC
16/22 AWG
Function
J1/Pin 1
J1/Pin 2
J1/Pin 3
J1/Pin 4
J2/Pin 1
J2/Pin 2
J2/Pin 3
J2/Pin 4
Color
WH
BK
GN
RD
OG
BU
BN
YE
Function
J3/Pin 1
J3/Pin 2
J3/Pin 3
J3/Pin 4
J4/Pin 1
J4/Pin 2
J4/Pin 3
J4/Pin 4
Color
VT
GY
PK
TN
WH/BK
WH/GN
WH/RD
WH/BU
4 A/port, 8 A total
16-pin multifast connector
16 conductors
Mates with
CKNWM 16-16-*
Function
J1/Pin 1
J1/Pin 2
J1/Pin 3
J1/Pin 4
J2/Pin 1
J2/Pin 2
J2/Pin 3
J2/Pin 4
Pin / Color
1/WH
2/BK
3/GN
4/RD
5/OG
6/BU
7/BN
8/YE
Function
J3/Pin 1
J3/Pin 2
J3/Pin 3
J3/Pin 4
J4/Pin 1
J4/Pin 2
J4/Pin 3
J4/Pin 4
Pin / Color
9/VT
10/GY
11/PK
12/TN
13/WH/BK
14/WH/GN
15/WH/RD
16/WH/BU
VB 4X1.5N-*
VB 4X1.5N-CS16
Functional Wiring Diagrams
K189
Common Positive
Integral Cable
Common Positive
multifast Connector
Isolated Circuit
Integral Cable
Isolated Circuit
multifast Connector
VB 40.5N-*
VB 40.5N-CS12
VB 4X1.5N-*
VB 4X1.5N-CS16
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
Specifications
Housing:
Connectors:
Contacts:
Thread Inserts:
Cable:
Temperature:
Protection:
Accessories:
Nylon.
eurofast ®: Nylon or PUR, spacings to VDE 0110 Group C.
Gold plated brass, machined from solid stock.
Nickel plated brass.
See table.
-30° to +80°C (-22° to +176°F).
NEMA 1, 3, 4, 6P and IEC IP 67.
(2) VZ 3 closure caps and one VZ 1 label kit (8 labels) included.
Cable Length:
Standard length for junction boxes and multifast ® series quick disconnect cordsets is nominal 5 meters.
Other lengths available by request. Consult factory.
Dimensions
VB 40.5N-*
VB 4X1.5N-*
VB 40.5N-CS12
VB 4X1.5N-CS16
Notes:
1. Removable labels included (Part number VZ 1).
2. Clearance hole for #8 screw (3 places).
3. Housings with integral cable: 23.0 mm thickness. Housings with quick disconnect: 33.0 mm thickness.
Pinout Diagram
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K190
TURCK
Process Wiring Products
12 and 16-Pin multifast ® Cordsets-NAMUR
• Straight Male and Female
Connectors
• IEC IP 67 Protection
• 300 V, 3 A
Housing Style
Part Number
Cable
Features
CKNM 12-9-*
CKNM.. CSNM..
PLTC PVC Blue
9x22 AWG
105°C
6.9 mm OD
Cable #RF50741-*M†
CSNM 12-9-*
Pinout
1. BN
2. WH
3. BK
4. GN
5. RD
6. OG
7. BU
8. YE
9. VT
10. N/C
11. N/C
12. N/C
1. WH
2. BK
3. GN
4. RD
5. OG
6. BU
7. BN
8. YE
9. VT
10. GY
11. PK
12. TN
13. WH/BK
14. WH/GN
15. WH/RD
16. WH/BU
For use with
junction boxes and
for multi-conductor
applications
CKNM 16-16-*
PLTC PVC Blue
16x22 AWG
105°C
8.3 mm OD
Cable #RF50744-*M†
CSNM 16-16-*
* Length in meters.
Standard cable length is 5 meters. Consult factory for other lengths.
Standard coupling nut material is nickel plated brass “CK(S)NM..”; “CK(S)NMV..” indicates 316 stainless steel.
†
See pages K236 - K244 for reelfast ® cable information.
K191
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
12 and 16-Pin multifast ® Cordsets-NAMUR
• Right Angle Male and Female
Connectors
• IEC IP 67 Protection
• 300 V, 3 A
Housing Style
Part Number
Cable
Features
Pinout
CKNWM 12-9-*
PLTC PVC Blue
9x22 AWG
105°C
6.9 mm OD
Cable #RF50741-*M†
CKNWM.. CSNWM..
CSNWM 12-9-*
1. BN
2. WH
3. BK
4. GN
5. RD
6. OG
7. BU
8. YE
9. VT
10. N/C
11. N/C
12. N/C
1. WH
2. BK
3. GN
4. RD
5. OG
6. BU
7. BN
8. YE
9. VT
10. GY
11. PK
12. TN
13. WH/BK
14. WH/GN
15. WH/RD
16. WH/BU
For use with
junction boxes and
for multi-conductor
applications
CKNWM 16-16-*
PLTC PVC Blue
16x22 AWG
105°C
8.3 mm OD
Cable #RF50744-*M†
CSNWM 16-16-*
* Length in meters.
Standard cable length is 5 meters. Consult factory for other lengths.
Standard coupling nut material is nickel plated brass “CK(S)NWM..”; “CK(S)NWMV..” indicates 316 stainless steel.
†
See pages K236 - K244 for reelfast ® cable information.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K192
TURCK
Process Wiring Products
12 and 16-Pin multifast ® Cordsets-NAMUR
• Straight and Right Angle Male
Connectors
• IEC IP 67 Protection
• 300 V, 3 A
Housing Style
Part Number
CSSNM..
Cable
Features
CSSNM 12-9-*
PLTC PVC Blue
9x22 AWG
105°C
6.9 mm OD
Cable #RF50741-*M†
CSSNWM 12-9-*
Pinout
1. BN
2. WH
3. BK
4. GN
5. RD
6. OG
7. BU
8. YE
9. VT
10. N/C
11. N/C
12. N/C
1. WH
2. BK
3. GN
4. RD
5. OG
6. BU
7. BN
8. YE
9. VT
10. GY
11. PK
12. TN
13. WH/BK
14. WH/GN
15. WH/RD
16. WH/BU
For use with
junction boxes and
for multi-conductor
applications
CSSNWM..
CSSNM 16-16-*
PLTC PVC Blue
16x22 AWG
105°C
8.3 mm OD
Cable #RF50744-*M†
CSSNWM 16-16-*
* Length in meters.
Standard cable length is 5 meters. Consult factory for other lengths.
Standard coupling nut material is nickel plated brass “CSSNM..”; “CSSNMV/CSSNWMV..” indicates 316 stainless steel.
†
See pages K236 - K244 for reelfast ® cable information.
K193
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
Cables and Cordsets for Extreme Applications
TURCK extremelife connectors are approved by DNV and ABS for use in marine shipboard
environments. TURCK also has an entire line of junction boxes for wiring consolidation. From
off-the-shelf junctions for 4-20 mA transmitters, to custom boxes for any application, TURCK
reduces costs by making wiring faster, easier and more reliable.
•
ABS Approved
•
Certified petr IEEE-45
•
UL listed for Marine Applications to STD UL 1309
•
Meets IEC 332-3 Category A Flame Test
•
CSA listed to C22.2 No. 245
•
Jacket Material Provides Impact Protection to -50°C (-58°F)
•
Available in Multiple Configurations
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K194
TURCK
Process Wiring Products
extremelife ® cables are heavy duty for extreme temperature environments and provide excellent resistance to extreme cold
temperatures and oilfield drilling muds. TURCK offers multiple single and twisted pair conductor options. extremelife
cables are available in two jacket types, extremelife-25 and extremelife-55.
The following characteristics are specific to each cable.
Characteristics
extremelife-25
Cable Gage Range
16 to 22
UL Rating
UL1309
CSA Rating
CSA 22.2 No. 245
ABS Approval No.
IEEE Approvals
03-HS400763-PDA
IEEE 45-1998 and IEEE 1580-2001
Flexible Stranding
Standard Insulation
Yes
T75 and T90 UL and CSA, T75 IEEE
XLPE Insulation
110X for increased electrical properties required for network applications
Flame Retardancy
IEEE 1202/FT4 and IEC 332-3 Category A
Cold Bend Pass Temperature
-40°C (-40°F)
-55°C (-67°F)
Cold Impact Pass Temperature
Good
-50°C (-58°F)
Cut through and Abrasion Resistance
Good
Excellent
Moisture and Oil Resistance
Installation Handling
Oilfield Drilling Mud Resistance
Braided Armor
Sunlight Resistance
K195
extremelife-55
Excellent
Good
Excellent
Available with or without
Yes
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
extremelife ® cables have been extensively tested in various drilling muds/fluids.
Samples of five different drilling fluids were used to evaluate how extremelife cables
handle harsh environments. Cable samples were placed in the muds and put in a
test oven at +65.6°C (+150°F). Shrink/swell and tensile strength/elongation were
monitored throughout a 28 day aging test.
The extremelife cables, with their exclusive jacket materials, were compared with
the industry standard neoprene cables. All tested cables passed the tensile strength
and elongation tests. The extremelife cables proved to be much more stable in size
through the tests when compared to the neoprene jacketed cables.
Drilling Mud Types Used:
•
Water based
•
Synthetic based (two types)
•
Diesel based
•
Mineral oil based
extremelife Cables:
•
Standard cables are stocked for quick delivery, and custom designs ship within 6 to 10 weeks.
•
Multiple designs and custom configurations can be built using 16 to 22 AWG wires.
•
Bronze armor styles combined with stable tinned-copper armor.
•
Cost effective cables, since extremelife can be made with 22 AWG conductors and
tinned-copper armor.
•
Assorted conductor sizes and insulation materials allow usage in network applications.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K196
TURCK
Process Wiring Products
minifast ® extremelife ® Extension Cordset Part Number Key - Control Cable
Part Number Keys are to assist in IDENTIFICATION ONLY. Consult Factory for catalog items not identified.
P - R S V
R K V
40-180 - 4M
Process Cordset
minifast
R = Straight
W = Right Angle
Length in Meters
Gender
Number of Wires / AWG / Conductor Colors
K = Female Connector, Female Threads
S = Male Connector, Male Threads
Y = Male Connector, Female Threads
40-180
40-181
40-188
56-964
70-182
80-073
80-158
100-183
3/18 AWG BN, BU, GN/YE
3/18 AWG BN, BU, GN/YE
3/18 AWG BN, BU, GN/YE
5/18 AWG BK, BU, GN/YE, BN, WH
5/18 AWG BU, BN, WH, BK, GN/YE
8/18 AWG BK, WH, BU, RD, YE, BN, GY, GN
8/18 AWG BK, WH, BU, RD, YE, BN, GY, GN
9/18 AWG WH/BK, BK/WH, WH/GN, GN/WH,
WH/RD, RD/WH, N/C, GN/YE, WH/OG, OG/WH
100-189 9/18 AWG WH/BK, BK/WH, WH/GN, GN/WH,
WH/RD, RD/WH, N/C, GN/YE, WH/OG, OG/WH
Coupling Nut Material
(Blank) = Nylon
M = Nickel Plated Brass
V = 316 Stainless Steel
Insertion Point of Extension Cable 2nd Prefix*
* Male Connector Listed 1st, Female Connector 2nd
Example: P-RSV RKV 40-180-4M
Extension Examples:
P - R S V
R K V
40-180 - 4M
P - W S V
RSV .. - RKV ..
P - R S V
W K V
40-180 - 4M
WSV .. - RKV ..
40-180 - 4M
P - W S V
RSV .. - WKV ..
K197
R K V
W K V
40-180 - 4M
WSV .. - WKV ..
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
4 and 5-Wire minifast ® extremelife ® Control Cordsets
• Straight Female Connectors
• NEMA 1, 3, 4, 6P and
IEC IP 67 Protection
Housing
Part Number
Cable
Features
P-RKV 40-180-*M
PVC Black
3x18 AWG, 1 STP with GND
Foil/Drain
90°C
300 V, 9 A
8.4 mm OD
Cable #RF51180-*M†
extremelife-25
UL 1309 approved
2-wire Analog
P-RKV 40-181-*M
PVC Black, Braided Armor
3x18 AWG, 1 STP with GND
Foil/Drain
90°C
300 V, 9 A
12.5 mm OD
Cable #RF51181-*M†
extremelife-25
Braided Armor
Cable
UL 1309 approved
2-wire Analog
P-RKV 40-188-*M
TPE Black
3x18 AWG, 1 STP with GND
Foil/Drain
90°C
300 V, 9 A
8.4 mm OD
Cable #RF51188-*M†
extremelife-55
UL 1309 approved
2-wire Analog
P-RKV 56-964-*M
PVC Blue
5x18 AWG,
Foil/Drain
90°C
300 V, 9 A
10.4 mm OD
Cable #RF50964-*M†
extremelife-25
UL 1309 approved
5-wire shielded
Pinouts
1. BU
2. BN
3. Drain
4. GN/YE
1. BK
2. BU
3. GN/YE
4. BN
5. WH
* Length in meters. Standard cable lengths are 2, 4, 6, 8 and 10 meters. Consult factory for other lengths.
Standard coupling nut material is 316 stainless steel "P-RKV .."; "P-RKM .." indicates nickel plated brass.
†
See pages K236 - K244 for reelfast ® cable information.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K198
TURCK
Process Wiring Products
7, 8, and 9-Wire minifast ® extremelife ® Control Cordsets
• Straight Female Connectors
• NEMA 1, 3, 4, 6P and
IEC IP 67 Protection
Housing
Part Number
Cable
Features
P-RKV 70-182-*M
PVC Black
5x18 AWG, 2 STP with GND
90°C
300 V, 9 A
10.4 mm OD
Cable #RF51182-*M†
extremelife-25
UL 1309 approved
2-wire Analog x 2
P-RKV 80-073-*M
PVC Blue, Braided Armor
8x18 AWG, 4 STP
90°C
300 V, 9 A
17.8 mm OD
Cable #RF51073-*M†
extremelife-25
Braided Armor
Cable
UL 1309 approved
2-wire Analog x 4
P-RKV 80-158-*M
TPE Black
8x18 AWG, 4 STP
90°C
300 V, 9 A
15.1 mm OD
Cable #RF51158-*M†
extremelife-55
UL 1309 approved
2-wire Analog x 4
P-RKV 100-183-*M
PVC Black
9x18 AWG, 4 STP with GND
90 C
300 V, 7 A
13.2 mm OD
Cable #RF51183-*M†
extremelife-25
UL 1309 approved
2-wire Analog x 4
P-RKV 100-189-*M
TPE Black
9x18 AWG, 4 STP with GND
90°C
300 V, 7 A
15.1 mm OD
Cable #RF51189-*M†
extremelife-55
UL 1309 approved
2-wire Analog x 4
Pinout
1. BU
2. BN
3. Drain
4. WH
5. BK
6. Drain
7. GN/YE
1. BK
2. WH
3. BU
4. RD
5. YE
6. BN
7. GY
8. GN
1. WH/BK
2. BK/WH
3. WH/GN
4. GN/WH
5. WH/RD
6. RD/WH
7. N/C
8. GN/YE
9. WH/OG
10. OG/WH
* Length in meters. Standard cable lengths are 2, 4, 6, 8 and 10 meters. Consult factory for other lengths.
Standard coupling nut material is 316 stainless steel "P-RKV .."; "P-RKM .." indicates nickel plated brass.
†
See pages K236 - K244 for reelfast ® cable information.
K199
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
4 and 5-Wire minifast ® extremelife ® Control Cordsets
• Right Angle Female Connectors
• NEMA 1, 3, 4, 6P and
IEC IP 67 Protection
Housing
Part Number
Cable
Features
P-WKV 40-180-*M
PVC Black
3x18 AWG, 1 STP with GND
Foil/Drain
90°C
300 V, 9 A
8.4 mm OD
Cable #RF51180-*M†
extremelife-25
UL 1309 approved
2-wire Analog
P-WKV 40-181-*M
PVC Black, Braided Armor
3x18 AWG, 1 STP with GND
Foil/Drain
90°C
300 V, 9 A
12.5 mm OD
Cable #RF51181-*M†
extremelife-25
Braided Armor
Cable
UL 1309 approved
2-wire Analog
P-WKV 40-188-*M
TPE Black
3x18 AWG, 1 STP with GND
Foil/Drain
90°C
300 V, 9 A
8.4 mm OD
Cable #RF51188-*M†
extremelife-55
UL 1309 approved
2-wire Analog
P-WKV 56-964-*M
PVC Blue
5x18 AWG,
Foil/Drain
90°C
300 V, 9 A
10.4 mm OD
Cable #RF50964-*M†
extremelife-25
UL 1309 approved
5-wire shielded
Pinouts
1. BU
2. BN
3. Drain
4. GN/YE
1. BK
2. BU
3. GN/YE
4. BN
5. WH
* Length in meters. Standard cable lengths are 2, 4, 6, 8 and 10 meters. Consult factory for other lengths.
Standard coupling nut material is 316 stainless steel "P-WKV .."; "P-WKM .." indicates nickel plated brass.
†
See pages K236 - K244 for reelfast ® cable information.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K200
TURCK
Process Wiring Products
7, 8, and 9-Wire minifast ® extremelife ® Control Cordsets
• Right Angle Female Connectors
• NEMA 1, 3, 4, 6P and
IEC IP 67 Protection
Housing
Part Number
Cable
Features
P-WKV 70-182-*M
PVC Black
5x18 AWG, 2 STP with GND
90°C
300 V, 9 A
10.4 mm OD
Cable #RF51182-*M†
extremelife-25
UL 1309 approved
2-wire Analog x 2
P-WKV 80-073-*M
PVC Blue, Braided Armor
8x18 AWG, 4 STP
90°C
300 V, 9 A
17.8 mm OD
Cable #RF51073-*M†
extremelife-25
Braided Armor
Cable
UL 1309 approved
2-wire Analog x 4
P-WKV 80-158-*M
TPE Black
8x18 AWG, 4 STP
90°C
300 V, 9 A
15.1 mm OD
Cable #RF51158-*M†
extremelife-55
UL 1309 approved
2-wire Analog x 4
P-WKV 100-183-*M
PVC Black
9x18 AWG, 4 STP with GND
90°C
300 V, 7 A
13.2 mm OD
Cable #RF51183-*M†
extremelife-25
UL 1309 approved
2-wire Analog x 4
P-WKV 100-189-*M
TPE Black
9x18 AWG, 4 STP with GND
90°C
300 V, 7 A
15.1 mm OD
Cable #RF51189-*M†
extremelife-55
UL 1309 approved
2-wire Analog x 4
Pinouts
1. BU
2. BN
3. Drain
4. WH
5. BK
6. Drain
7. GN/YE
1. BK
2. WH
3. BU
4. RD
5. YE
6. BN
7. GY
8. GN
1. WH/BK
2. BK/WH
3. WH/GN
4. GN/WH
5. WH/RD
6. RD/WH
7. N/C
8. GN/YE
9. WH/OG
10. OG/WH
* Length in meters. Standard cable lengths are 2, 4, 6, 8 and 10 meters. Consult factory for other lengths.
Standard coupling nut material is 316 stainless steel "P-WKV .."; "P-WKM .." indicates nickel plated brass.
†
See pages K236 - K244 for reelfast ® cable information.
K201
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
4 and 5-Wire minifast ® extremelife ® Control Cordsets
• Straight Male Connectors
• NEMA 1, 3, 4, 6P and
IEC IP 67 Protection
Housing
Part Number
Cable
Features
P-RSV 40-180-*M
PVC Black
3x18 AWG, 1 STP with GND
Foil/Drain
90°C
300 V, 9 A
8.4 mm OD
Cable #RF51180-*M†
extremelife-25
UL 1309 approved
2-wire Analog
P-RSV 40-181-*M
PVC Black, Braided Armor
3x18 AWG, 1 STP with GND
Foil/Drain
90°C
300 V, 9 A
12.5 mm OD
Cable #RF51181-*M†
extremelife-25
Braided Armor
Cable
UL 1309 approved
2-wire Analog
P-RSV 40-188-*M
TPE Black
3x18 AWG, 1 STP with GND
Foil/Drain
90°C
300 V, 9 A
8.4 mm OD
Cable #RF51188-*M†
extremelife-55
UL 1309 approved
2-wire Analog
P-RSV 56-964-*M
PVC Blue
5x18 AWG,
Foil/Drain
90°C
300 V, 9 A
10.4 mm OD
Cable #RF50964-*M†
extremelife-25
UL 1309 approved
5-wire shielded
Pinouts
1. BU
2. BN
3. Drain
4. GN/YE
1. BK
2. BU
3. GN/YE
4. BN
5. WH
* Length in meters. Standard cable lengths are 2, 4, 6, 8 and 10 meters. Consult factory for other lengths.
Standard coupling nut material is 316 stainless steel "P-RSV .."; "P-RSM .." indicates nickel plated brass.
†
See pages K236 - K244 for reelfast ® cable information.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K202
TURCK
Process Wiring Products
7, 8, and 9-Wire minifast ® extremelife ® Control Cordsets
• Straight Male Connectors
• NEMA 1, 3, 4, 6P and
IEC IP 67 Protection
Housing
Part Number
Cable
Features
P-RSV 70-182-*M
PVC Black
5x18 AWG, 2 STP with GND
90°C
300 V, 9 A
10.4 mm OD
Cable #RF51182-*M†
extremelife-25
UL 1309 approved
2-wire Analog x 2
P-RSV 80-073-*M
PVC Blue, Braided Armor
8x18 AWG, 4 STP
90°C
300 V, 9 A
17.8 mm OD
Cable #RF51073-*M†
extremelife-25
Braided Armor
Cable
UL 1309 approved
2-wire Analog x 4
P-RSV 80-158-*M
TPE Black
8x18 AWG, 4 STP
90°C
300 V, 9 A
15.1 mm OD
Cable #RF51158-*M†
extremelife-55
UL 1309 approved
2-wire Analog x 4
P-RSV 100-183-*M
PVC Black
9x18 AWG, 4 STP with GND
90°C
300 V, 7 A
13.2 mm OD
Cable #RF51183-*M†
extremelife-25
UL 1309 approved
2-wire Analog x 4
P-RSV 100-189-*M
TPE Black
9x18 AWG, 4 STP with GND
90°C
300 V, 7 A
15.1 mm OD
Cable #RF51189-*M†
extremelife-55
UL 1309 approved
2-wire Analog x 4
Pinouts
1. BU
2. BN
3. Drain
4. WH
5. BK
6. Drain
7. GN/YE
1. BK
2. WH
3. BU
4. RD
5. YE
6. BN
7. GY
8. GN
1. WH/BK
2. BK/WH
3. WH/GN
4. GN/WH
5. WH/RD
6. RD/WH
7. N/C
8. GN/YE
9. WH/OG
10. OG/WH
* Length in meters. Standard cable lengths are 2, 4, 6, 8 and 10 meters. Consult factory for other lengths.
Standard coupling nut material is 316 stainless steel "P-RSV .."; "P-RSM .." indicates nickel plated brass.
†
See pages K236 - K244 for reelfast ® cable information.
K203
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
4 and 5-Wire minifast ® extremelife ® Control Cordsets
• Right Angle Male Connectors
• NEMA 1, 3, 4, 6P and
IEC IP 67 Protection
Housing
Part Number
Cable
Features
P-WSV 40-180-*M
PVC Black
3x18 AWG, 1 STP with GND
Foil/Drain
90°C
300 V, 9 A
8.4 mm OD
Cable #RF51180-*M†
extremelife-25
UL 1309 approved
2-wire Analog
P-WSV 40-181-*M
PVC Black, Braided Armor
3x18 AWG, 1 STP with GND
Foil/Drain
90°C
300 V, 9 A
12.5 mm OD
Cable #RF51181-*M†
extremelife-25
Braided Armor
Cable
UL 1309 approved
2-wire Analog
P-WSV 40-188-*M
TPE Black
3x18 AWG, 1 STP with GND
Foil/Drain
90°C
300 V, 9 A
8.4 mm OD
Cable #RF51188-*M†
extremelife-55
UL 1309 approved
2-wire Analog
P-WSV 56-964-*M
PVC Blue
5x18 AWG,
Foil/Drain
90°C
300 V, 9 A
10.4 mm OD
Cable #RF50964-*M†
extremelife-25
UL 1309 approved
5-wire shielded
Pinouts
1. BU
2. BN
3. Drain
4. GN/YE
1. BK
2. BU
3. GN/YE
4. BN
5. WH
* Length in meters. Standard cable lengths are 2, 4, 6, 8 and 10 meters. Consult factory for other lengths.
Standard coupling nut material is 316 stainless steel "P-WSV .."; "P-WSM .." indicates nickel plated brass.
†
See pages K236 - K244 for reelfast ® cable information.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K204
TURCK
Process Wiring Products
7, 8 and 9-Wire minifast ® extremelife ® Control Cordsets
• Right Angle Male Connectors
• NEMA 1, 3, 4, 6P and
IEC IP 67 Protection
Housing
Part Number
Cable
Features
P-WSV 70-182-*M
PVC Black
5x18 AWG, 2 STP with GND
90°C
300 V, 9 A
10.4 mm OD
Cable #RF51182-*M†
extremelife-25
UL 1309 approved
2-wire Analog x 2
P-WSV 80-073-*M
PVC Blue, Braided Armor
8x18 AWG, 4 STP
90°C
300 V, 9 A
17.8 mm OD
Cable #RF51073-*M†
extremelife-25
Braided Armor
Cable
UL 1309 approved
2-wire Analog x 4
P-WSV 80-158-*M
TPE Black
8x18 AWG, 4 STP
90°C
300 V, 9 A
15.1 mm OD
Cable #RF51158-*M†
extremelife-55
UL 1309 approved
2-wire Analog x 4
P-WSV 100-183-*M
PVC Black
9x18 AWG, 4 STP with GND
90°C
300 V, 7 A
13.2 mm OD
Cable #RF51183-*M†
extremelife™-25
UL 1309 approved
2-wire Analog x 4
P-WSV 100-189-*M
TPE Black
9x18 AWG, 4 STP with GND
90°C
300 V, 7 A
15.1 mm OD
Cable #RF51189-*M†
extremelife-55
UL 1309 approved
2-wire Analog x 4
Pinouts
1. BU
2. BN
3. Drain
4. WH
5. BK
6. Drain
7. GN/YE
1. BK
2. WH
3. BU
4. RD
5. YE
6. BN
7. GY
8. GN
1. WH/BK
2. BK/WH
3. WH/GN
4. GN/WH
5. WH/RD
6. RD/WH
7. N/C
8. GN/YE
9. WH/OG
10. OG/WH
* Length in meters. Standard cable lengths are 2, 4, 6, 8 and 10 meters. Consult factory for other lengths.
Standard coupling nut material is 316 stainless steel "P-WSV .."; "P-WSM .." indicates nickel plated brass.
†
See pages K236 - K244 for reelfast ® cable information.
K205
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
Process Wiring Accessories Selection Guide
7/8", 1, & 1-1/8" minifast ®
Thread
lokfast ®
Guard
Conduit
Adapters
Conduit Adapter
Ground Ring
Field
Wireables
Closure
Caps
Pages
K207
K209
K213
K215
K229
M12 eurofast ® Thread
lokfast
Guard
Conduit
Adapters
Conduit Adapter
Ground Ring
Field
Wireables
Closure
Caps
Pages
K207
K211
K213
K219
K232
M23 multifast ® Thread
Conduit Adapters
Field Wireables
Accessories
Pages
K212
K223
K234
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K206
TURCK
Process Wiring Products
minifast ® lokfast ® Guards
Part Number
Application
LOCK-MINI
Nylon locking guard for straight minifast standard body connectors
(RKM, RKV, RSM and RSV) in Class I, Division 2 installations*
LOCK-MINI (10/BAG)
LOCK-MINI-ANGLE
Nylon locking guard for right angle minifast standard body connectors
(WKM, WKV, WSM and WSV) in Class I, Division 2 installations*
LOCK-MINI-ANGLE (10/BAG)
lokfast Closed
LOCK-MINI-FW
Nylon locking guard for straight minifast field wireable connectors
(BS 41..., and B 41...) in Class I, Division 2 installations*
LOCK-MINI-FW (10/BAG)
LOCK-MINI-B&C
Nylon locking guard for straight minifast "B" Style and "C" Style connectors
(RKM, RKV, RSM and RSV) in Class I, Division 2 installations*
LOCK-MINI-B&C (10/BAG)
LOCK-MINI-B&C-ANGLE
LOCK-MINI-B&C-ANGLE (10/BAG)
Nylon locking guard for right angle minifast "B" Style and "C" Style
connectors (WKM, WKV, WSM and WSV) in Class I, Division 2 installations*
lokfast Open
eurofast ® lokfast Guards
Part Number
LOCK-EURO-G
LOCK-EURO-G (10/BAG)
LOCK-EURO-R
LOCK-EURO-R (10/BAG)
LOCK-EURO-FW
LOCK-EURO-FW (10/BAG)
Application
Nylon locking guard for straight eurofast G-body connectors
(RKG, RKGV, RSG and RSGV) in Class I, Division 2 installations*
Nylon locking guard for straight eurofast R-body connectors
(RKR, RKRV, RSR and RSRV) in Class I, Division 2 installations*
lokfast Open
Nylon locking guard for straight eurofast field wireable connectors
(B81.., BS81.. and BM81..) in Class I, Division 2 installations*
lokfast Closed
* See TURCK Control Drawing QCF-00147 (FM) or Ni-2.404 (CSA) at www.turck.com/fmcd/ for guidance on installation in hazardous locations.
K207
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
lokfast ® Guards for use with AIM Stations
Part Number
Application
LOCK-FP-T
Nylon locking guard kit for use with models FDNP-L0808G-TT, FDNP-XSG16-TT
in Class I, Division 2 installations*
LOCK-FL-T
Nylon locking guard kit for use with models FDNL-L1600-T, FDNL-CPG88-TT
in Class I, Division 2 installations*
LOCK-FQ-T
Nylon locking guard kit for use with models FDNQ-XSG08-T, FDNQ-S0800-T
in Class I, Division 2 installations*
LOCK-4MB12
Nylon locking guard kit for use with models 4MB12-4P2-CS12, 4MB12-5P3-5
in Class I, Division 2 installations*
LOCK-8MB12
Nylon locking guard kit for use with models 8MB12-4P2-CS12, 8MB12-5P3-5
in Class I, Division 2 installations*
LOCK-FP-E
Nylon locking guard kit for use with model FENP-XSG16
in Class I, Division 2 installations*
LOCK-FP-C
Nylon locking guard kit for use with model FLDP-IOM 88-0001
in Class I, Division 2 installations*
LOCK-FL-E
Nylon locking guard kit for use with model FDNL-S1600-E
in Class I, Division 2 installations*
LOCK-FL-C
Nylon locking guard kit for use with model FDNL-L1600-C
in Class I, Division 2 installations*
LOCK-FQ-E
Nylon locking guard kit for use with model FDNQ-CSG44-E
in Class I, Division 2 installations*
LOCK-FQ-C
Nylon locking guard kit for use with model FDNQ-S0400-C
in Class I, Division 2 installations*
LOCK-FP-REP
Nylon locking guard kit for use with models FDN-DN1, REP-DN, FDN-MSTR
in Class I, Division 2 installations*
Guards for lokfast Bus Ports
Guards for lokfast Aux Power Ports
Guards for lokfast I/O Ports
* lokfast kit includes guards for Bus / I/O / Aux Power depending on module kits.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K208
TURCK
Process Wiring Products
minifast ® Conduit Adapters, 1 Port
• Attaches to Standard Crouse-Hinds 3/4" Form 8, Mark 9 Conduit
Bodies for Transition to 3 and 5-Wire minifast Connectors
• Gasket and 8-32 x 1/2 Mounting Screws
• IP 67 Protection
(only when all receptacles are mated or covered with plugs)
• Terminal Strips Accept Up to 12 AWG Wires
Drawing
Part Number
Specs
Wiring Diagrams
Attaches to standard
conduit body for transition
to 3-wire minifast connector
CA-1/RKF 30
CA-1/RKF 40
Application
Nylon Housing
80°C
250 V, 9 A
Attaches to standard
conduit body for transition
to 4-wire minifast connector
Attaches to standard
conduit body for transition
to 5-wire minifast connector
CA-1/RKF 50
Standard receptacle housing material is nickel plated brass.."RKF"; "RKFV" indicates 316 stainless steel.
Example: CA-1/RKFV 50.
Pinouts
Female
3-Pin
K209
4-Pin
5-Pin
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
minifast ® Conduit Adapters, 2 Port
• Attaches to Standard Crouse-Hinds 3/4" Form 8, Mark 9 Conduit Bodies for
Transition to 3-5 Wire minifast Connectors
• Gasket and 8-32 x 1/2 Mounting Screws
• IP 67 Protection (only when all receptacles are mated or covered with plugs)
• Terminal Strips Accept Up to 12 AWG Wires
Drawing
Part Number
Specs
Application
Wiring Diagrams
Attaches to standard conduit body
for transition to 3-wire minifast
connector.
CA-2/RKF 30
Attaches to standard conduit body
for transition to 3-wire minifast
connector, parallel wired.
CA-2/RKF 30/S651
Attaches to standard conduit body
for transition to 4-wire minifast
connector.
CA-2/RKF 40
Nylon Housing
80°C
250 V, 9 A
CA-2/RKF 40/S651
Attaches to standard conduit body
for transition to 4-wire minifast
connector, parallel wired.
CA-2/RKF 50
Attaches to standard conduit body
for transition to 5-wire minifast
connector.
CA-2/RKF 50/S651
Attaches to standard conduit body
for transition to 5-wire minifast
connector, parallel wired.
Standard receptacle housing material is nickel plated brass.."RKF"; "RKFV" indicates 316 stainless steel.
Example: CA-2/RKFV 50.
For pinouts see bottom of page K222.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K210
TURCK
Process Wiring Products
eurofast ® Conduit Adapters
• Attaches to Standard Crouse-Hinds 3/4" Form 8 Conduit
Bodies for Transition to 5-Wire eurofast ® Connectors
• Gasket and 8-32 x 1/2 Mounting Screws Included
• IP 67 Protection
(only when all receptacles are mated or covered with plugs)
• Terminal Strips Accept Up to 12 AWG Wires
Drawing
Part Number
Specs
Application
Pinout
Wiring Diagrams
CA-1/FK 4.5
Nylon housing
80°C
250 V, 4 A
Attaches to standard
conduit body for
transition to 5-wire
eurofast connector
CA-2/FK 4.5
Standard receptacle housing material is nickel plated brass "CA-1(2)/FK 4.5"; "CA-1(2)/FKV 4.5" indicates stainless steel.
K211
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
multifast ® Conduit Adapters, 1 Port
• Attaches to Standard Crouse-Hinds 3/4" Form 8, Mark 9 Conduit Bodies for
Transition to 12 and 19-Pin multifast Connectors
• Gasket and 8-32 x 1/2 Mounting Screws Included
• IP 67 Protection (only when all receptacles are mated or covered with plugs)
• Terminal Strips Accept Up to 14 AWG Wires
Drawing
Part Number
CA-1/CK 12
Specs
Application
Nylon housing
Nickel plated
brass receptacle
housing
80°C
300 V, 4 A
CA-1/CKV 12
Nylon housing
Stainless steel
receptacle
housing
80°C
300 V, 4 A
CA-1/CK 19
Nylon housing
Nickel plated
brass receptacle
housing
80°C
150 V, 4 A
CA-1/CKV 19
Nylon housing
Stainless steel
receptacle
housing
80°C
150 V, 4 A
Wiring Diagrams
Attaches to standard conduit
body for transition to 12-pin
multifast connector.
Attaches to standard conduit
body for transition to 19-pin
multifast connector.
Pinouts
Female
12-Pin
19-Pin
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K212
TURCK
Process Wiring Products
minifast ® eurofast ® Conduit Adapter Ground Rings
Drawing
Part Number
Specs
Application
CA GROUND RING - MINI FEMALE
Nickel plated brass plating
Stainless steel
Ground + Set screw material
Grounding of coupling nuts
of armored cordsets
CA GROUND RING - EURO FEMALE
K213
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
Notes:
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K214
TURCK
Process Wiring Products
3, 4 and 5-Pin minifast ® Field Wireable Connectors
• Straight Female Connectors
• NEMA 1, 3, 4, 6P and IEC IP 67
Protection
Drawing Number
K215
Part Number
Housing Specs.
Application
B 4131-0/9
Glass filled nylon
PG 9 cable gland,
accepts 6-8 mm cable diameter
Screw terminals,
accepts up to 16 AWG conductors
85°C
250 V, 12 A
Mates with all 3-pin
cordsets and
receptacles
B 4131-0/13.5
Glass filled nylon
PG 13.5 cable gland,
accepts 10-12 mm cable diameter
Screw terminals,
accepts up to 16 AWG conductors
85°C
250 V, 12 A
Mates with all 3-pin
cordsets and
receptacles
B 4141-0/9
Glass filled nylon
PG 9 cable gland,
accepts 6-8 mm cable diameter
Screw terminals,
accepts up to 16 AWG conductors
85°C
250 V, 9 A
Mates with all 4-pin
cordsets and
receptacles
B 4141-0/13.5
Glass filled nylon
PG 13.5 cable gland,
accepts 10-12 mm cable diameter
Screw terminals,
accepts up to 16 AWG conductors
85°C
250 V, 9 A
Mates with all 4-pin
cordsets and
receptacles
B 4151-0/9
Glass filled nylon
PG 9 cable gland,
accepts 6-8 mm cable diameter
Screw terminals,
accepts up to 16 AWG conductors
85°C
250 V, 9 A
Mates with all 5-pin
cordsets and
receptacles
B 4151-0/13.5
Glass filled nylon
PG 13.5 cable gland,
accepts 10-12 mm cable diameter
Screw terminals,
accepts up to 16 AWG conductors
85°C
250 V, 9 A
Mates with all 5-pin
cordsets and
receptacles
B 4151-0/16
Glass filled nylon
PG 16 cable gland,
accepts 12-14 mm cable diameter
Screw terminals,
accepts up to 16 AWG conductors
85°C
250 V, 9 A
Mates with all 5-pin
cordsets and
receptacles
Pinout
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
3, 4 and 5-Pin minifast ® Field Wireable Connectors
• Right Angle Female Connectors
• NEMA 1, 3, 4, 6P and IEC IP 67
Protection
Drawing Number
Part Number
Housing Specs.
Application
Pinout
B 4231-0/9
Glass filled nylon
PG 9 cable gland,
accepts 6-8 mm cable diameter
Screw terminals,
accepts up to 16 AWG conductors
85°C
250 V, 12 A
Mates with all 3-pin
cordsets and
receptacles
B 4241-0/9
Glass filled nylon
PG 9 cable gland,
accepts 6-8 mm cable diameter
Screw terminals,
accepts up to 16 AWG conductors
85°C
250 V, 9 A
Mates with all 4-pin
cordsets and
receptacles
B 4251-0/9
Glass filled nylon
PG 9 cable gland,
accepts 6-8 mm cable diameter
Screw terminals,
accepts up to 16 AWG conductors
85°C
250 V, 9 A
Mates with all 5-pin
cordsets and
receptacles
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K216
TURCK
Process Wiring Products
3, 4 and 5-Pin minifast ® Field Wireable Connectors
• Straight Male Connectors
• NEMA 1, 3, 4, 6P and IEC IP 67
Protection
Drawing Number
K217
Part Number
Housing Specs.
Application
BS 4131-0/9
Glass filled nylon
PG 9 cable gland,
accepts 6-8 mm cable diameter
Screw terminals,
accepts up to 16 AWG conductors
85° C
250 V, 12 A
Mates with all 3-pin
cordsets and
receptacles
BS 4131-0/13.5
Glass filled nylon
PG 13.5 cable gland,
accepts 10-12 mm cable diameter
Screw terminals,
accepts up to 16 AWG conductors
85°C
250 V, 12 A
Mates with all 3-pin
cordsets and
receptacles
BS 4141-0/9
Glass filled nylon
PG 9 cable gland,
accepts 6-8 mm cable diameter
Screw terminals,
accepts up to 16 AWG conductors
85°C
250 V, 9 A
Mates with all 4-pin
cordsets and
receptacles
BS 4141-0/13.5
Glass filled nylon
PG 13.5 cable gland,
accepts 10-12 mm cable diameter
Screw terminals,
accepts up to 16 AWG conductors
85°C
250 V, 9 A
Mates with all 4-pin
cordsets and
receptacles
BS 4151-0/9
Glass filled nylon
PG 9 cable gland,
accepts 6-8 mm cable diameter
Screw terminals,
accepts up to 16 AWG conductors
85°C
250 V, 9 A
Mates with all 5-pin
cordsets and
receptacles
BS 4151-0/13.5
Glass filled nylon
PG 13.5 cable gland,
accepts 10-12 mm cable diameter
Screw terminals,
accepts up to 16 AWG conductors
85°C
250 V, 9 A
Mates with all 5-pin
cordsets and
receptacles
BS 4151-0/16
Glass filled nylon
PG 16 cable gland,
accepts 12-14 mm cable diameter
Screw terminals,
accepts up to 16 AWG conductors
85°C
250 V, 9 A
Mates with all 5-pin
cordsets and
receptacles
Pinout
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
3, 4 and 5-Pin minifast ® Field Wireable Connectors
• Right Angle Male Connectors
• NEMA 1, 3, 4, 6P and IEC IP 67
Protection
Drawing Number
Part Number
Housing Specs.
Application
Pinout
BS 4231-0/9
Glass filled nylon
PG 9 cable gland,
accepts 6-8 mm cable diameter
Screw terminals,
accepts up to 16 AWG conductors
85°C
250 V, 12 A
Mates with all 3-pin
cordsets and
receptacles
BS 4241-0/9
Glass filled nylon
PG 9 cable gland,
accepts 6-8 mm cable diameter
Screw terminals,
accepts up to 16 AWG conductors
85°C
250 V, 9 A
Mates with all 4-pin
cordsets and
receptacles
BS 4251-0/9
Glass filled nylon
PG 9 cable gland,
accepts 6-8 mm cable diameter
Screw terminals,
accepts up to 16 AWG conductors
85°C
250 V, 9 A
Mates with all 5-pin
cordsets and
receptacles
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K218
TURCK
Process Wiring Products
4, 5 and 8-Wire eurofast ® Field Wireable Connectors, Standard and Reverse Key
• Straight Female Connectors
• IEC IP 67 Protection
Drawing
K219
Part Number
Housing Specs.
Application
B 8141-0
PBT, Black
PG 7 cable gland
accepts 4-6 mm cable diameter
Screw terminals
accepts up to 18 AWG conductors
85°C
250 V, 4 A
Mates with standard
key 4-pin cordsets
and receptacles
B 8141-0/PG 9
PBT, Black
PG 9 cable gland
accepts 6-8 mm cable diameter
Screw terminals
85°C
250 V, 4 A
Mates with standard
key 4-pin cordsets
and receptacles
B 8151-0/PG 9
PBT, Black
PG 9 cable gland
accepts 4-8 mm cable diameter
Screw terminals
accepts up to 18 AWG conductors
85°C
125 V, 4 A
Mates with standard
key 5-pin cordsets
and receptacles
BM 8151-0
PBT, Black
PG 9 cable gland
accepts 4-8 mm cable diameter
Screw terminals
Metal coupling nut
85°C
125 V, 4 A
Mates with standard
key 5-pin cordsets
and receptacles
BWS 8141-0
PBT, Black
PG 9 cable gland
accepts 4-8 mm cable diameter
Screw terminals
Metal coupling nut
85°C
250 V, 4 A
Mates with reverse
key 4-pin cordsets
and receptacles
BWS 8151-0
PBT, Black
PG 9 cable gland
accepts 4-8 mm cable diameter
Screw terminals
accepts up to 18 AWG conductors
85°C
125 V, 4 A
Mates with reverse
key 5-pin cordsets
and receptacles
B 8181-0
Nylon, Black
PG 9 cable gland
accepts 4-8 mm cable diameter
Screw terminals
accepts up to 18 AWG conductors
85°C
60 VAC/75 VDC, 2 A
Mates with standard
key 8-pin cordsets
and receptacles
Pinout
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
4 and 5-Wire eurofast ® Field Wireable Connectors, Standard and Reverse Key
• Right Angle Female Connectors
• IEC IP 67 Protection
Drawing
Part Number
Housing Specs.
Application
Pinout
B 8241-0
PBT, Black
PG 7 cable gland
accepts 4-6 mm cable diameter
Screw terminals
accepts up to 18 AWG conductors
85°C
250 V, 4 A
Mates with standard
key 4-pin cordsets
and receptacles
B 8241-0/PG 9
PBT, Black
PG 9 cable gland
accepts 6-8 mm cable diameter
Screw terminals
85°C
250 V, 4 A
Mates with standard
key 4-pin cordsets
and receptacles
B 8251-0/PG 9
PBT, Black
PG 9 cable gland
accepts 4-8 mm cable diameter
Screw terminals
accepts up to 18 AWG conductors
85°C
125 V, 4 A
Mates with standard
key 5-pin cordsets
and receptacles
BWS 8251-0/PG 9
PBT, Black
PG 9 cable gland
accepts 4-8 mm cable diameter
Screw terminals
accepts up to 18 AWG conductors
85°C
125 V, 4 A
Mates with reverse
key 5-pin cordsets
and receptacles
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K220
TURCK
Process Wiring Products
4, 5 and 8-Wire eurofast ® Field Wireable Connectors, Standard and Reverse Key
• Straight Male Connectors
• IEC IP 67 Protection
Drawing
K221
Part Number
Housing Specs.
Application
BS 8141-0
PBT, Black
PG 7 cable gland
accepts 4-6 mm cable diameter
Screw terminals
accepts up to 18 AWG conductors
85°C
250 V, 4 A
Mates with standard
key 4-pin cordsets
and receptacles
BS 8141-0/PG 9
PBT, Black
PG 9 cable gland
accepts 6-8 mm cable diameter
Screw terminals
85°C
250 V, 4 A
Mates with standard
key 4-pin cordsets
and receptacles
BS 8151-0/PG 9
PBT, Black
PG 9 cable gland,
accepts 4-8 mm cable diameter
Screw terminals
accepts up to 18 AWG conductors
85°C
125 V, 4 A
Mates with standard
key 5-pin cordsets
and receptacles
BSWS 8141-0
PBT, Black
PG 9 cable gland
accepts 4-8 mm cable diameter
Screw terminals
accepts up to 18 AWG conductors
85°C
250 V, 4 A
Mates with reverse
key 4-pin cordsets
and receptacles
BSWS 8151-0
PBT, Black
PG 9 cable gland
accepts 4-8 mm cable diameter
Screw terminals
accepts up to 18 AWG conductors
85°C
125 V, 4 A
Mates with reverse
key 5-pin cordsets
and receptacles
BS 8181-0
Nylon, Black
PG 9 cable gland
accepts 4-8 mm cable diameter
Screw terminals
accepts up to 18 AWG conductors
85°C
60 VAC/75 VDC, 2 A
Mates with standard
key 8-pin cordsets
and receptacles
Pinout
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
4, 5 and 8-Wire eurofast ® Field Wireable Connectors, Standard and Reverse Key
• Right Angle Male Connectors
• IEC IP 67 Protection
Drawing
Part Number
Housing Specs.
Application
Pinout
BS 8241-0
PBT, Black
PG 7 cable gland
accepts 4-6 mm cable diameter
Screw terminals
accepts up to 18 AWG conductors
85°C
250 V, 4 A
Mates with standard
key 4-pin cordsets
and receptacles
BS 8241-0/PG 9
PBT, Black
PG 9 cable gland
accepts 6-8 mm cable diameter
Screw terminals
85°C
250 V, 4 A
Mates with standard
key 4-pin cordsets
and receptacles
BS 8251-0/PG 9
PBT, Black
PG 9 cable gland
accepts 4-8 mm cable diameter
Screw terminals
accepts up to 18 AWG conductors
85°C
125 V, 4 A
Mates with standard
key 5-pin cordsets
and receptacles
BSWS 8241-0
PBT, Black
PG 9 cable gland
accepts 4-8 mm cable diameter
Screw terminals
accepts up to 18 AWG conductors
85°C
250 V, 4 A
Mates with reverse
key 4-pin cordsets
and receptacles
BSWS 8251-0
PBT, Black
PG 9 cable gland
accepts 4-8 mm cable diameter
Screw terminals
accepts up to 18 AWG conductors
85°C
125 V, 4 A
Mates with reverse
key 5-pin cordsets
and receptacles
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K222
TURCK
Process Wiring Products
12, 16 and 19-Pin multifast ® Field Wireable In-line Connectors
• Female Contact Holder & Thread
• For Use with Custom Wiring &
Junction Boxes
• Convert Hard Wiring into Quick
Disconnect
Housing Style
K223
Part Number
Cable
Features
CK 12-0
Nickel plated brass
PG 11 cable gland,
Accepts 4-10 mm cable diameter
Accepts up to 12x18 AWG conductors
125°C
300 V, 8 A
Field wireable 12-pin in-line
connector, for use with
minifast ®, eurofast ® (single
input per port) and microfast®
junctions boxes
CK 16-0
Nickel plated brass
PG 13.5 cable gland,
Accepts 5-12 mm cable diameter
Accepts up to 16x18 AWG conductors
125°C
150 V, 8 A
Field wireable 16-pin in-line
connector, for use with
eurofast (isolated power
supply) junctions boxes
CK 19-0
Nickel plated brass
PG 13.5 cable gland,
Accepts 5-12 mm cable diameter
Accepts up to 19x18 AWG conductors
125°C
150 V, 8 A
Field wireable 19-pin in-line
connector, for use with
eurofast (two Signals per port)
junctions boxes
CK 125-0
Nickel plated brass
IAC,
Accepts 3-10 mm cable diameter
Accepts up to 12x18 AWG conductors
125°C
150 V, 8 A
Field wireable 12-pin in-line
connector
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Pinouts
www.turck.com
Process
Automation
12, 16 and 19-Pin multifast ® Field Wireable In-line Connectors
• Male Contact Holder & Thread
• For Use with Custom Wiring &
Junction Boxes
• Convert Hard Wiring into Quick
Disconnect
Housing Style
Part Number
Cable
Features
Pinouts
CSS 12-0
Nickel plated brass
PG 13.5 cable gland,
Accepts 5-12 mm cable diameter
Accepts up to 12x18 AWG
conductor
125°C
300 V, 8 A
Field wireable 12-pin in-line
connector, for use with
minifast®, eurofast® (single input per
port) and microfast® junctions boxes
CSS 16-0
Nickel plated brass
PG 13.5 cable gland,
Accepts 5-12 mm cable diameter
Accepts up to 16x18 AWG
conductor
125°C
150 V, 8 A
Field wireable 16-pin in-line
connector, for use with
eurofast (isolated power supply)
junctions boxes
CSS 19-0
Nickel plated brass
PG 13.5 cable gland,
Accepts 5-12 mm cable diameter
Accepts up to 19x18 AWG
conductor
125°C
150 V, 8 A
Field wireable 19-pin in-line
connector, for use with
eurofast (two signals per port)
junctions boxes
CSS 125-0
Nickel plated brass
IAC,
Accepts 3-10 mm cable diameter
Accepts up to 12x18 AWG
conductors
125°C
150 V, 8 A
Field wireable 12-pin in-line
connector
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K224
TURCK
Process Wiring Products
12, 16 and 19-Pin multifast ® Field Wireable In-line Connectors
• Male Contact Holder, Female Thread
• For Use with Custom Wiring &
Junction Boxes
• Convert Hard Wiring into Quick
Disconnect
• IEC IP 65 Protection
Housing Style
K225
Part Number
Cable
Features
CS 12-0
Nickel plated brass
PG 11 cable gland,
Accepts 4-10 mm cable diameter
Accepts up to 12x18 AWG
conductor
125° C
300 V, 8 A
Field wireable 12-pin in-line
connector, for use with
minifast ®, eurofast ® (single input per
port) and microfast ® junctions boxes
CS 16-0
Nickel plated brass
PG 13.5 cable gland,
Accepts 5-12 mm cable diameter
Accepts up to 16x18 AWG
conductor
125° C
150 V, 8 A
Field wireable 16-pin in-line
connector, for use with
eurofast® (isolated power supply)
junctions boxes
CS 19-0
Nickel plated brass
PG 13.5 cable gland,
Accepts 5-12 mm cable diameter
Accepts up to 19x18 AWG
conductor
125° C
150 V, 8 A
Field wireable 19-pin in-line
connector, for use with
eurofast (two Signals per port)
junctions boxes
CS 125-0
Nickel plated brass
IAC,
Accepts 3-10 mm cable diameter
Accepts up to 12x18 AWG
conductors
125° C
150 V, 8 A
Field wireable 12-pin in-line
connector
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
Pinouts
www.turck.com
Process
Automation
12, 16 and 19-Pin multifast ® Field Wireable, Front Mount
• Female and Male Connectors
• For Use with Custom Wiring &
Junction Boxes
• Convert Hard Wiring into Quick
Disconnect
• IEC IP 65 Protection
Housing Style
Part Number
Cable
Features
Pinout
CKF 12-0
Nickel plated brass
Accepts up to 12x18 AWG
conductor
125° C
300 V, 8 A
Field wireable 12-pin receptacle, for
use with minifast ®, eurofast ® (single
input per port) and microfast ®
junctions boxes
CKF 16-0
Nickel plated brass
Accepts up to 16x18 AWG
conductor
125° C
150 V, 8 A
Field wireable 16-pin receptacle, for
use with eurofast (isolated power
supply) junctions boxes
CKF 19-0
Nickel plated brass
Accepts up to 19x18 AWG
conductor
125° C
150 V, 8 A
Field wireable 19-pin receptacle, for
use with eurofast (two signals per
port) junctions boxes
CSF 12-0
Nickel plated brass
Accepts up to 12x18 AWG
conductor
125° C
300 V, 8 A
Field wireable 12-pin receptacle, for
use with minifast, eurofast (single
input per port) and microfast
junctions boxes
CSF 16-0
Nickel plated brass
Accepts up to 16x18 AWG
conductor
125° C
150 V, 8 A
Field wireable 16-pin receptacle, for
use with eurofast (isolated power
supply) junctions boxes
CSF 19-0
Nickel plated brass
Accepts up to 19x18 AWG
conductor
125° C
150 V
8A
Field wireable 19-pin receptacle, for
use with eurofast (two signals per
port) junctions boxes
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K226
TURCK
Process Wiring Products
12, 16 and 19-Pin multifast ® Field Wireable Receptacles, Front Mount, Long Threads
• Female and Male Connectors
• For Use with Custom Wiring &
Junction Boxes
• Convert Hard Wiring into Quick
Disconnect
• IEC IP 65 Protection
Housing Style
K227
Part Number
Cable
Features
CKFL 12-0
Nickel plated brass
Accepts up to 12x18 AWG
conductor
125°C
300 V, 8 A
Field wireable 12-pin receptacle,
for use with minifast ®, eurofast ®
(single input per port) and
microfast ® junctions boxes
CKFL 16-0
Nickel plated brass
Accepts up to 16x18 AWG
conductor
125° C
150 V, 8 A
Field wireable 16-pin receptacle,
for use with eurofast (isolated
power supply) junctions boxes
CKFL 19-0
Nickel plated brass
Accepts up to 19x18 AWG
conductor
125°C
150 V, 8 A
Field wireable 19-pin receptacle,
for use with eurofast (two signals
per port) junctions boxes
CSFL 12-0
Nickel plated brass
Accepts up to 12x18 AWG
conductor
125° C
300 V, 8 A
Field wireable 12-pin receptacle,
for use with minifast, eurofast
(single input per port) and
microfast junctions boxes
CSFL 16-0
Nickel plated brass
Accepts up to 16x18 AWG
conductor
125°C
150 V, 8 A
Field wireable 16-pin receptacle,
for use with eurofast (isolated
power supply) junctions boxes
CSFL 19-0
Nickel plated brass
Accepts up to 19x18 AWG
conductor
125°C
150 V, 8 A
Field wireable 19-pin receptacle,
for use with eurofast (two Signals
per port) junctions boxes
Pinouts
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
12, 16 and 19-Pin multifast ® Field Wireable Receptacles, Rear Mount
• Female Contact Holder & Thread
• For Use with Custom Wiring &
Junction Boxes
• Convert Hard Wiring into Quick
Disconnect
• IEC IP 65 Protection
Housing Style
Part Number
Cable
Features
Pinouts
CKFD 12-0
Nickel plated brass
Accepts up to 12x18 AWG
conductor
125°C
300 V, 8 A
Field wireable 12-pin receptacle,
for use with minifast ®, eurofast ®
(single input per port) and
microfast junctions boxes
CKFD 16-0
Nickel plated brass
Accepts up to 16x18 AWG
conductor
125°C
150 V, 8 A
Field wireable 16-pin receptacle,
for use with eurofast (isolated
power supply) junctions boxes
CKFD 19-0
Nickel plated brass
Accepts up to 19x18 AWG
conductor
125°C
150 V, 8 A
Field wireable 19-pin receptacle,
for use with eurofast (two signals
per port) junctions boxes
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K228
TURCK
Process Wiring Products
minifast ® Closure Caps, Standard
• 7/8-16UN Thread
• Nickel Plated Brass and
Stainless Steel
• Male and Female Caps
Housing
Part Number
Specs
Application
RKM-CC
Nickel plated brass
7/8-16UN threads
6" stainless steel lanyard
RKMV-CC
Stainless steel
7/8-16UN threads
6" stainless steel lanyard
RSM-CC
Nickel plated brass
7/8-16UN threads
6" stainless steel lanyard
RSMV-CC
Stainless steel
7/8-16UN threads
6" stainless steel lanyard
RKF-CC
Nickel plated brass
7/8-16UN threads
6" stainless steel lanyard
RKFV-CC
Stainless steel
7/8-16UN threads
6" stainless steel lanyard
RSF-CC
Nickel plated brass
7/8-16UN threads
6" stainless steel lanyard
RSFV-CC
Stainless steel
7/8-16UN threads
6" stainless steel lanyard
RKF-MC
Nickel plated brass
7/8-16UN threads
BUNA-N gasket
RKFV-MC
Stainless steel
7/8-16UN threads
BUNA-N gasket
RSF-MC
Nickel plated brass
7/8-16UN threads
BUNA-N gasket and O-ring
RSFV-MC
Stainless steel
7/8-16UN threads
BUNA-N gasket and O-ring
Closure cap, mates to male cordsets
Closure cap, mates to female cordsets
Closure cap, mates to male
receptacles
Closure cap, mates to female
receptacles
Closure cap, mates to male
receptacles
Closure cap, mates to female
receptacles
Note: Add "/S1599" to the end of Part Number for closure caps assembled on cordsets.
K229
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
minifast ® Closure Caps, "B" Style
• 1-16UN Threads
• Nickel Plated Brass and
Stainless Steel
• Male and Female Caps
Housing
Part Number
Specs
RKMB-CC
Nickel plated brass
1-16UN threads
6" stainless steel lanyard
RKMBV-CC
Stainless steel
1-16UN threads
6" stainless steel lanyard
RSMB-CC
Nickel plated brass
1-16UN threads
6" stainless steel lanyard
RSMBV-CC
Stainless steel
1-16UN threads
6" stainless steel lanyard
RKFB-CC
Nickel plated brass
1-16UN threads
6" stainless steel lanyard
RKFBV-CC
Stainless steel
1-16UN threads
6" stainless steel lanyard
RSFB-CC
Nickel plated brass
1-16UN threads
6" stainless steel lanyard
RSFBV-CC
Stainless steel
1-16UN threads
6" stainless steel lanyard
RKFB-MC
Nickel plated brass
1-16UN threads
BUNA-N gasket and O-ring
RKFBV-MC
Stainless steel
1-16UN threads
BUNA-N gasket and O-ring
RSFB-MC
Nickel plated brass
1-16UN threads
BUNA-N gasket and O-ring
RSFBV-MC
Stainless steel
1-16UN threads
BUNA-N gasket and O-ring
Application
Closure cap, mates to male cordsets
Closure cap, mates to female cordsets
Closure cap, mates to male
receptacles
Closure cap, mates to female
receptacles
Closure cap, mates to male
receptacles
Closure cap, mates to female
receptacles
Note: Add "/S1599" to the end of Part Number for closure caps assembled on cordsets.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K230
TURCK
Process Wiring Products
minifast ® Closure Caps, "C" Style
• 11/8-16UN Threads
• Nickel Plated Brass and
Stainless Steel
• Male and Female Caps
Housing
Part Number
Specs
RKMC-CC
Nickel plated brass
11/8-16UN threads
6" stainless steel lanyard
RKMCV-CC
Stainless steel
11/8-16UN threads
6" stainless steel lanyard
RSMC-CC
Nickel plated brass
11/8-16UN threads
6" stainless steel lanyard
RSMCV-CC
Stainless steel
11/8-16UN threads
6" stainless steel lanyard
RKFC-CC
Nickel plated brass
11/8-16UN threads
6" stainless steel lanyard
Application
Closure cap, mates to male cordsets
Closure cap, mates to female cordsets
RKFCV-CC
Stainless steel
11/8-16UN threads
6" stainless steel lanyard
RSFC-CC
Nickel plated brass
11/8-16UN threads
6" stainless steel lanyard
Closure cap, mates to male
receptacles
Closure cap, mates to female
receptacles
RSFCV-CC
Stainless steel
11/8-16UN threads
6" stainless steel lanyard
RKFC-MC
Nickel plated brass
11/8-16UN threads
BUNA-N gasket and O-ring
RKFCV-MC
Stainless steel
11/8-16UN threads
BUNA-N gasket and O-ring
RSFC-MC
Nickel plated brass
11/8-16UN threads
BUNA-N gasket and O-ring
RSFCV-MC
Stainless steel
11/8-16UN threads
BUNA-N gasket and O-ring
Closure cap, mates to male
receptacles
Closure cap, mates to female
receptacles
Note: Add "/S1599" to the end of Part Number for closure caps assembled on cordsets.
K231
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
eurofast ® Closure Caps
Drawing
Part Number
RK-CC
Cable
Features
Nickel plated brass
M12x1 threads
6" lanyard
Mates to male cordsets
RKV-CC
Stainless steel
M12x1 threads
6" lanyard
Mates to male cordsets
RS-CC
Nickel plated brass
M12x1 threads
6" lanyard
Mates to female cordsets
RSV-CC
Stainless steel
M12x1 threads
6" lanyard
FK-CC
Nickel plated brass
M12x1 threads
Mates to male receptacles
6" lanyard with eyelet
FKV-CC
FS-CC
Mates to female cordsets
Stainless steel
Mates to male receptacles
M12x1 threads
6" lanyard with eyelet
Nickel plated brass
M12x1 threads
Mates to female receptacles
6" lanyard with eyelet
FSV-CC
Stainless steel
Mates to female receptacles
M12x1 threads
6" lanyard with eyelet
FKK-CC
Plastic
Mates to male receptacles
M12x1 threads
3" lanyard with eyelet
FSK-CC
Plastic
M12x1 threads
Mates to female receptacles
3" lanyard with eyelet
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K232
TURCK
Process Wiring Products
eurofast ® Closure Caps
Drawing
Part Number
Features
RKK-CC
Plastic
M12x1 threads
Mates to male cordsets
RSK-CC
Plastic
M12x1 threads
Mates to female cordsets
RK-MC
Nickel plated brass
M12x1 threads
No lanyard
Mates to male receptacles
RKV-MC
Stainless steel
M12x1 threads
No lanyard
Mates to male receptacles
RS-MC
Nickel plated brass
M12x1 threads
No lanyard
Mates to female receptacles
RSV-MC
Stainless steel
M12x1 threads
No lanyard
Mates to female receptacles
VZ3-RED (8/BAG)
VZ3 (8/BAG)
K233
Cable
Red Nylon
Mates to VB2 series junction boxes and
female receptacles
Nylon
Mates to VB2 series junction boxes and
female receptacles
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
multifast ® Accessories
• Field Wireable Assembly Tools
• Closure Caps
Housing Style
Part Number
Cable
Features
CK-TOOL
N/A
Tool to aid assembly of all M23 multifast
field wireables with female threads
CKF-TOOL
N/A
Tool to aid assembly of all M23 multifast
field wireables with male threads
CS-CC
Nickel plated brass
Neoprene gasket
CK-CC
Nickel plated brass
Neoprene gasket
Closure caps for multifast cordset
connectors
Closure caps for multifast receptacles (CSF
and CKF) and CSS cordset connectors
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K234
TURCK
Process Wiring Products
Notes:
K235
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
Bulk Wiring Control Cable
•
Spooled in 30, 100, or 200 meter lengths in self-feeding packages
•
2-Wire Analog or HART, Additional Analog or Discrete, NAMUR and extremelife ® cables to choose from
•
ITC, PLC, Exposed Run/Direct Burial, Marine Shipboard and more
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K236
TURCK
Process Wiring Products
2-Wire Analog or HART Control Circuit reelfast ® Cable Selection Guide
Diagram A
JACKET
OVERALL FOIL SHIELD
DRAIN WIRE
BROWN
BLUE
Diagram B
OVERALL FOIL SHIELD
JACKET (color may vary)
DRAIN WIRE
BROWN*
BLUE*
FOIL SHIELD
YELLOW/GREEN
(DEVICE GROUND)
Diagram C
Interlocking Aluminum ARMOR
JACKET
FOIL SHIELD
DRAIN WIRE
(Outside foil shield
on RF50993-*M)
BLUE
BROWN
GREEN/YELLOW
(DEVICE GROUND)
INNER JACKET
(Color may vary. See page F2)
Diagram D
JACKET (color may vary)
FOIL SHIELD
DRAIN WIRE
ORANGE & WHITE
GREEN/YELLOW
(DEVICE GROUND)
RED & WHITE
GREEN & WHITE
BLACK & WHITE*
OVERALL FOIL SHIELD
Up to 8 STP. See page F2 for details.
*
Conductor colors may vary. See table on page K240 for details.
STP = Shielded Twisted Pair
Note: See page K240 for corresponding bulk cable specifications.
K237
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
MS
HA
Tem
( ° C p.
)
e
CSA
RF51026-30M
RF51026-100M
RF51026-200M
RF51098-30M
RF51098-100M
RF51098-200M
RF51327-30M
RF51327-100M
RF51327-200M
RF51330-30M
RF51330-100M
RF51330-200M
RF50947-30M
RF50947-100M
RF50947-200M
RF50949-30M
RF50949-100M
RF50949-200M
RF51162-30M
RF51162-100M
RF51162-200M
RF51124-30M
RF51124-100M
RF51124-200M
RF50950-30M
RF50950-100M
RF50950-200M
RF50993-30M
RF50993-100M
RF50993-200M
5
17
34
1 pair = (BU, BN), Drain (20)
STP Foil/Drain
*
*
ITC/PLTC
105°
-25°
7
22
44
1 pair = (WH, BK), GN, Drain (18)
STP Foil/Drain
*
*
ITC/PLTC
105°
-25°
7
22
44
1 pair = (WH, BK), GN, Drain (18)
STP Foil/Drain
*
*
ITC/PLTC
105°
-25°
6
19
38
1 pair = (BU, BN), GN/YE, Drain (20)
STP Foil/Drain
*
*
ITC-Exposed
Run/Direct
Burial/PLTC
105°
-25°
14
47
94
1 pair = (BU, BN), GN/YE, Drain (20)
STP Foil/Drain
*
*
ITC/PLTC
105°
-25°
6
19
38
1 pair = (BU, BN), GN/YE, Drain (20)
STP Foil/Drain
*
*
ITC/PLTC
105°
-25°
6
19
38
1 pair = (BU, BN), GN/YE, Drain (20)
STP Foil/Drain
*
*
ITC-Exposed
Run/Direct
Burial/PLTC
105°
-25°
6
19
38
1 pair = (RD, BK), GN/YE, Drain (20)
STP Foil/Drain
*
*
ITC/PLTC
105°
-25°
6
19
38
1 pair = (BU, BN), GN/YE, Drain (20)
Foil/Drain
*
*
ITC/PLTC
105°
-25°
11
34
68
1 pair = (BU, BN), GN/YE, Drain (24)
STP Foil/Drain
*
*
ITC/PLTC
105°
-25°
Conductor Colors
Typ
UL
Shi
eld
Shi
p
(lbs Wt.
)
Jacket
Characteristics
ID
Nu
mb
er
AW
G
Dia
gra
m
No
. of
Co
nd.
2-Wire Analog or HART Control Circuit reelfast ® Cable Selection Guide
A
2
PVC Plum
18 300 V
7.2 mm OD
B
3
PVC Plum
16 300 V
7.6 mm OD
B
3
PVC Blue
16 300 V
7.6 mm OD
B
3
PVC Blue
18 300 V
7.2 mm OD
C
3
PVC ARMOR Plum
18 300 V
13.5 mm OD
B
3
PVC Plum
18 300 V
7.2 mm OD
B
3
PVC Plum
18 300 V
7.2 mm OD
B
3
PVC Plum
18 300 V
7.2 mm OD
B
3
PVC BU
18 300 V
7.2 mm OD
C
3
22
D
9
PVC Plum
18
300 V
22
10 mm OD
RF51229-30M
RF51229-100M
RF51229-200M
9
30
60
4 pair/22 AWG = (WH/BK, BK/WH),
(WH/GN, GN/WH), (WH/RD, RD/WH),
(WH/OG, OG/WH), 18 AWG=GN/YE,
Drains (5x22)
STP Foil/Drain
*
*
ITC-Exposed
Run/Direct
Burial/PLTC
105°
-25°
D
9
PVC Plum
18
300 V
22
10 mm OD
RF50960-30M
RF50960-100M
RF50960-200M
9
30
60
4 pair/22 AWG = (WH/BK, BK/WH),
(WH/GN, GN/WH), (WH/RD, RD/WH),
(WH/OG, OG/WH), 18 AWG = GN/YE,
Drains (5x22)
STP Foil/Drain
*
*
ITC/PLTC
105°
-25°
17
PVC Plum
18
300 V
22
12 mm OD
RF50959-30M
RF50959-100M
RF50959-200M
14
45
90
8 pair/22 AWG = (WH/BK, BK/WH),
(WH/GN, GN/WH), (WH/RD, RD/WH),
(WH/OG, OG/WH), (WH/BU, BU/WH),
(WH/BN, BN/WH), (WH/YE, YE/WH),
(WH/VT, VT/WH), 18 AWG = GN/YE,
Drains (9x22)
STP Foil/Drain
*
*
ITC/PLTC
105°
-25°
D
17
PVC Plum
18
300 V
22
12.7 mm OD
RF51230-30M
RF51230-100M
RF51230-200M
17
55
110
8 pair/22 AWG = (WH/BK, BK/WH),
(WH/GN, GN/WH), (WH/RD, RD/WH),
(WH/OG, OG/WH), (WH/BU, BU/WH),
(WH/BN, BN/WH), (WH/YE, YE/WH),
(WH/VT, VT/WH), 18 AWG = GN/YE,
Drains (9x22)
STP Foil/Drain
*
*
ITC-Exposed
Run/Direct
Burial/PLTC
105°
-25°
D
8
PVC BU
22 300 V
10 mm OD
RF50978-30M
RF50978-100M
RF50978-200M
9
30
60
4 Pair = (WH/BK, BK/WH), (WH/GN,
GN/WH), (WH/RD, RD/WH), (WH/OG,
OG/WH), GN/YE, Drain (22)
4 STP
Foil/Drain
*
*
ITC/PLTC
105°
-25°
16
PVC BU
22 300 V
12 mm OD
RF50977-30M
RF50977-100M
RF50977-200M
14
45
90
8 Pair = (WH/BK, BK/WH), (WH/GN,
GN/WH), (WH/RD, RD/WH), (WH/OG,
OG/WH), (WH/BU, BU/WH), (WH/BN,
BN/WH), (WH/YE, YE/WH), (WH/VT,
VT/WH), GN/YE, Drain (22)
8 STP
Foil/Drain
*
*
ITC/PLTC
105°
-25°
D
D
PVC ARMOR Plum
11.2 mm OD
STP = Shielded Twisted Pair.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K238
TURCK
Process Wiring Products
Additional Analog or Discrete Control Circuit reelfast ® Cable Selection Guide
Diagram B
Diagram A
FOIL SHIELD
JACKET (color may vary)
JACKET
FOIL SHIELD
DRAIN WIRE
BROWN
WHITE
BLACK
BLUE
DRAIN WIRE
GREEN/YELLOW
(DEVICE GROUND)
BLACK*
BROWN*
BLUE*
OVERALL FOIL SHIELD
YELLOW/GREEN
(DEVICE GROUND)
OVERALL FOIL SHIELD
Diagram D
Diagram C
JACKET (color may vary)
OVERALL FOIL SHIELD
JACKET
Interlocking Aluminum ARMOR
WHITE*
GREEN
BLACK
DRAIN WIRE
BLUE
RED
ORANGE
GREEN*
BLACK
RED
WHITE
Diagram E
JACKET
FOIL SHIELD
BROWN
BLUE
DRAIN WIRE
BLACK
OVERALL FOIL SHIELD
*
GREEN/YELLOW
(DEVICE GROUND)
WHITE
DRAIN WIRE
Conductor colors may vary. See table on page K240 for details.
STP = Shielded Twisted Pair
Note: See page K240 for corresponding bulk cable specifications.
K239
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
PVC GY
18 300 V
7.2 mm OD
A
4
PVC Plum
16 300 V
10.4 mm OD
A
4
PVC BU
16 300 V
10.4 mm OD
A
4
PVC Plum
18 300 V
8.1 mm OD
D
4
ARMOR PVC YE
18 600 V
13.5 mm OD
4
PVC GY
22 300 V
5.2 mm OD
C
4
PUR BK
22 300 V
6.9 mm OD
B
5
PVC Plum
16 300 V
12.5 mm OD
5
PVC GY
18 300 V
7.2 mm OD
E
5
PVC Plum
18 300 V
7.9 mm OD
C
6
PVC BU
16 300 V
9.6 mm OD
6
PVC YE
16 600 V
9.6 mm OD
6
PVC Plum
16 300 V
11.2 mm OD
C
6
PVC Plum
16 300 V
9.6 mm OD
C
11
PVC YE
18 300 V
10 mm OD
p.
Tem
MS
HA
e
Shi
eld
6
18
35
BN, BU, GN/YE
*
*
ITC/PLTC
105°
-25°
6
18
36
BK, WH, GN
*
*
ITC/PLTC
105°
-25°
10
32
64
Triad = (WH, RD, BK), GN, Triad
Foil/Drain
Drain (18)
*
*
ITC/PLTC
105°
-25°
10
32
64
Triad = (WH, RD, BK), GN, Triad
Foil/Drain
Drain (18)
*
*
ITC/PLTC
105°
-25°
7
21
42
Triad = (BU, BN, BK),
GN/YE, Drain (20)
Triad
Foil/Drain
*
*
ITC/PLTC
105°
-25°
11
36
71
BK, WH, RD, GN
*
*
UL 1569 MC,
ITC/PLTC
105°
-25°
3
9
18
BN, WH, BU, BK
*
*
ITC/PLTC
105°
-25°
4
14
28
BN, WH, BU, BK,
Drain (22)
Foil/Drain
*
*
ITC/PLTC
105°
-60°
15
49
98
1 pair = (WH, BK), BU, BN, STP
Foil/Drain
GN/YE, Drain (18)
*
*
ITC/PLTC
105°
-25°
7
21
42
BK, WH, GY, BN, BU
*
*
ITC/PLTC
105°
-25°
8
26
53
2 pair = (BK, WH), (BU,
BN), GN/YE, Drain (20)
STP
Foil/Drain
*
*
ITC-Exposed
Run/Direct
Burial/PLTC
105°
-25°
11
36
72
WH, RD, GN, OG, BK, BU, Foil/Drain
Drain (18)
*
*
ITC/PLTC
105°
-25°
11
34
68
BK, WH, RD, OG, BU, GN
*
*
ITC/PLTC
105°
-25°
13
45
90
WH, RD, GN, OG, BK, BU
*
*
ITC-Exposed
Run/Direct
Burial/PLTC
105°
-25°
11
36
72
WH, RD, GN, OG, BK, BU, Foil/Drain
Drain (18)
*
*
ITC/PLTC
105°
-25°
13
42
84
GN, YE, GY, PK, RD, BK,
VT, BU, WH, BN, GN/YE,
Drain (20)
*
*
ITC/PLTC
105°
-25°
Conductor Colors
Foil/Drain
Typ
CSA
3
RF50880-30M
RF50880-100M
RF50880-200M
RF51187-30M
RF51187-100M
RF51187-200M
RF51099-30M
RF51099-100M
RF51099-200M
RF51328-30M
RF51328-100M
RF51328-200M
RF51108-30M
RF51108-100M
RF51108-200M
RF51041-30M
RF51041-100M
RF51041-200M
RF50698-30M
RF50698-100M
RF50698-200M
RF51095-30M
RF51095-100M
RF51095-200M
RF51025-30M
RF51025-100M
RF51025-200M
RF50972-30M
RF50972-100M
RF50972-200M
RF51318-30M
RF51318-100M
RF51318-200M
RF50329-30M
RF50329-100M
RF50329-200M
RF51030-30M
RF51030-100M
RF51030-200M
RF51233-30M
RF51233-100M
RF51233-200M
RF51219-30M
RF51219-100M
RF51219-200M
RF51088-30M
RF51088-100M
RF51088-200M
UL
3
PVC YE
18 300 V
7.2 mm OD
Shi
p
(lbs Wt.
)
Jacket
Characteristics
ID
Nu
mb
er
Photo/Diagram
No
.o
Co f
nd.
AW
G
Additional Analog or Discrete Control Circuit reelfast ® Cable Selection Guide
STP = Shielded Twisted Pair.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K240
TURCK
Process Wiring Products
K241
PUR BU
20 300 V
5.2 mm OD
4
PVC BU
22 300 V
5.2 mm OD
5
PVC BU
22 300 V
6.8 mm OD
5
PUR BU
24 300 V
5.7 mm OD
9
PVC BU
22 300 V
6.9 mm OD
16
PVC BU
22 300 V
8.3 mm OD
RF50744-30M
RF50744-100M
RF50744-200M
MS
HA
Tem
( ° C p.
)
e
Shi
eld
3
10
19
BN, BU
*
*
AWM 2517
3
8
16
BN, BU
*
*
AWM 21002
3
9
18
BN, WH, BU, BK
*
*
AWM 2517
*
105°
-50°
5
15
29
WH, BK, GN, RD, OG
*
*
PLTC
*
105°
-30°
4
11
20
BU, OG, RD, YE, BK,
Drain (24)
*
*
AWM 21002
105°
-60°
5
13
26
WH, BK, GN, RD, OG,
BU, BN, YE, VT
*
*
PLTC
105°
-25°
8
25
50
WH, BK, GN, RD, OG,
BU, BN, YE, VT, GY, PK,
TN, WH/BK, WH/GN,
WH/RD, WH/BU
*
*
PLTC
105°
-25°
Conductor Colors
Foil/Drain
Typ
CSA
2
RF20003-30M
RF20003-100M
RF20003-200M
RF50657-30M
RF50657-100M
RF50657-200M
RF50598-30M
RF50598-100M
RF50598-200M
RF50767-30M
RF50767-100M
RF50767-200M
RF50928-30M
RF50928-100M
RF50928-200M
RF50741-30M
RF50741-100M
RF50741-200M
UL
2
PVC BU
20 300 V
5.15 mm OD
Shi
p
(lbs Wt.
)
Jacket
Characteristics
ID
Nu
mb
er
No
.o
Co f
nd.
AW
G
Pho
to
Intrinsically Safe NAMUR Circuit reelfast ® Cable Selection Guide
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
*
105°
-50°
105°
-60°
www.turck.com
Process
Automation
Notes:
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K242
TURCK
Process Wiring Products
Control extremelife ® reelfast ® Cable Selection Guide
• UL 1309 Approved
• ABS Approved
• Marine Shipboard
Diagram A
JACKET
Diagram B
JACKET
FOIL SHIELD
BRAIDED ARMOR*
FOIL SHIELD
DRAIN WIRE
DRAIN WIRE
BROWN
BLUE
YELLOW/GREEN
DEVICE GROUND
BROWN
BLUE
YELLOW/GREEN
INNER JACKET
OVERALL FOIL SHIELD
*AVAILABLE ON SOME CABLE TYPES
Diagram C
Diagram D
JACKET
JACKET
FOIL SHIELD
BROWN
WHITE
GREEN/YELLOW
DRAIN WIRE
BLACK
BLUE
FOIL SHIELD
DRAIN WIRE
{Up to 4 STP
See page F8 for
conductor colors.
DEVICE GROUND
OVERALL FOIL SHIELD
Diagram E
JACKET
BRAIDED ARMOR
FOIL SHIELD
DRAIN WIRE
RED & BLUE
BLACK & WHITE
YELLOW & BROWN
GREEN & GREY
INNER JACKET
STP = Shielded Twisted Pair
Note: See page K244 for corresponding bulk cable specifications.
K243
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
A
B
A
3
3
3
RF51180-30M
RF51180-100M
RF51180-200M
7
21
42
18
PVC, ARMOR, BK
300 V
12.5 mm OD
extremelife-25
RF51181-30M
RF51181-100M
RF51181-200M
17
57
114
1 pair = (BU, BN), GN/YE, Drain (20)
STP
Foil/Drain
*
*
18
TPE BK
300 V
8.4 mm OD
extremelife-55
RF51188-30M
RF51188-100M
RF51188-200M
6
20
40
1 pair = (BU, BN), GN/YE, Drain (20)
STP
Foil/Drain
*
*
RF50964-30M
RF50964-100M
RF50964-200M
10
33
66
BN, WH, BK, BU, GN/YE, Drain (20)
Foil/Drain
*
*
1 pair = (BU, BN), GN/YE, Drain (20)
STP
Foil/Drain
*
p. (
Tem
e
C)
18
PVC BK
300 V
8.4 mm OD
extremelife™-25
Typ
CSA
UL
Conductor Colors
Shi
eld
ID
Nu
mb
er
Shi
pW
t. (
lbs
)
ics
rist
Jac
ke
Ch t
ara
cte
Dia
gra
m
No
. of
Co
nd.
AW
G
Control extremelife ® reelfast ® Cable Selection Guide
105°
-40°
*
A
105°
-40°
B
105°
-55°
C
5
18
PVC BU
300 V
10.4 mm OD
extremelife-25
D
5
18
PVC BK
300 V
10.4 mm OD
extremelife-25
RF51182-30M
RF51182-100M
RF51182-200M
10
32
64
2 pair = (BN, BU), (BK, WH), GN/YE,
Drain (2 x 20)
STP
Foil/Drain
*
*
18
PVC, ARMOR, BU
300 V
17.8 mm OD
extremelife-25
RF51073-30M
RF51073-100M
RF51073-200M
31
103
206
4 pair = (BK, WH), (BU, RD), (YE, BN),
(GY, GN), Drains (4 x 20)
STP
Foil/Drain
*
*
18
TPE BK
300 V
15.1 mm OD
extremelife-55
RF51158-30M
RF51158-100M
RF51158-200M
18
60
120
4 pair = (BK, WH), (BU, RD), (YE, BN),
(GY, GN), Drains (5 x 20)
STP
Foil/Drain
*
*
B
105°
-55°
18
PVC BK
300 V
13.2 mm OD
extremelife-25
RF51183-30M
RF51183-100M
RF51183-200M
16
52
104
4 pair = (WH/BK, BK/WH), (WH/GN,
GN/WH), (WH/RD, RD/WH), (WH/OG,
OG/WH), GN/YE, Drains (4 x 20)
STP
Foil/Drain
*
*
A
105°
-40°
18
TPE BK
300 V
15.1 mm OD
extremelife-55
RF51189-30M
RF51189-100M
RF51189-200M
19
60
120
4 pair = (WH/BK, BK/WH), (WH/GN,
GN/WH), (WH/RD, RD/WH),
(WH/OG, OG/WH), GN/YE, Drains (4 x 20)
STP
Foil/Drain
*
*
B
105°
-55°
E
D
D
D
8
8
9
9
105°
-40°
A
105°
-40°
105°
-40°
STP = Shielded Twisted Pair
Type A - All extremelife-25 Cables
Type B - All extremelife-55 Cables
•
Marine Shipboard
•
Marine Shipboard
•
UL1309
•
UL1309
•
IEEE 1202/FT4
•
ITC
•
IEEE 45-1998
•
ABS App.No. 03-HS400-763-PDA
•
IEEE 1580-2001
•
IEC 332-3
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K244
TURCK
Process Wiring Products
TURCK Standards
Notes:
One or more of the following standards may apply to products or components of products in this catalog. This section is
intended to provide a reference to the applicable standards only. Original or facsimiles of the original standards documents
should be used for interpretation. It is the responsibility of the user to determine the suitability of use of the products
represented in this catalog.
ANSI/B93.55M
Generally defines the geometry and connection scheme of “mini” type connectors used in fluid power (valve) applications.
It defines the numerical marking of the pins and the conductor size and colors for 3 and 5 pin versions. This specification
was the basis for the so-called “automotive” standard conductor colors that are widely used on sensors.
CENELEC EN 50 044
Identifies connections for inductive proximity switches. The specification defines conductor colors for proximity switches
with 2, 3, or 4 conductors. It also defines numerical marking of the terminals, whether quick disconnect, or not. TURCK
sensors and recommended cordsets that apply within the scope of the standard comply with CENELEC EN 50 044. The
conventions defined in this standard have been widely adopted in industry to include photoelectric controls and other
related sensing devices.
CSA
The Canadian equivalent of UL in Canada. It is a government-run organization that tests and certifies that products conform
to their own set of safety-related specifications.
DIN 43650
Defines the geometry and other characteristics of the “square” connectors most frequently used on hydraulic and pneumatic
solenoid valves and other devices in the fluid power industry.
MSHA
The Mine Safety and Health Administration - a US Government agency that ensures and regulates safety for mines and mine
workers. The MSHA approval is required for products used in underground mines, including electrical equipment, power
cords, and instrumentation components.
The MSHA standards require special fire-resistant properties and characteristics that prevent the propagation of flames.
NRTL
Nationally Recognized Test Laboratory - An independent laboratory authorized by the US Government to perform product
safety evaluations. Test laboratories must meet government laboratory standards, and are audited annually by OSHA to
maintain this credential. UL standards are adopted by the US government and OSHA as being “Safety Standards”, and
these accredited labs then use the UL standards to perform product evaluations.
The Canadian Standards Association, (CSA) is authorized as a NRTL to perform product evaluations and tests to the UL
Standards. The certification mark “CSA NRTL/C” is then applied to products that satisfy all construction and performance
criteria for both US and Canada. This certification mark is generally accepted by local building, safety, and quality agencies
as meeting safety, construction, and performance criteria in both the US and Canada.
K245
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
Shielded Cordsets
Whenever wire is used to transmit electrical data, it is possible for the wire to absorb external noise, possibly changing the
characteristics of the electrical signal, or to give off noise that could cause changes in other electrical components that are
near. Shielding is the act of placing conductive material between the potential noise emitters and receivers.
Electrical noise is usually classified as electro-magnetic interference (EMI) or radio frequency interference (RFI).
TURCK offers a number of shielding options:
1. Foil shield with drain, drain not connected
3. Foil and braid shield with shield tied to coupling nut
2. Foil shield with drain, drain connected to a pin
4. Aluminum armored cable with armor tied to coupling nut
For a shield to be effective, it must be tied to a ground at some point. It is usually preferred to not tie the shield to ground
at more than one point to avoid ground loops. A shield not tied to a ground will reflect some noise and is better than no
shield at all, but will be much more effective if tied to a ground.
High frequency noise, RFI, is handled well with a foil shield. The wavelength of RFI is usually small and can pass through
the 'holes' in a braided shield. EMI is usually larger wavelengths and needs a braided shield to increase the mass of shielding
material to be effective.
Aluminum armored cables provide the ultimate in noise immunity as they are basically flexible conduit.
Select the shielded cordset that best meets your needs. If it is easier to tie the shield to ground inside the panel, the
foil/drain with the drain not connected inside the cordset is a good choice. If you can connect the drain via a pin inside the
device being connected, the foil/drain with the drain connected to a pin is a good choice. Any environments with EMI
noise from things like large motors or welding equipment will benefit from a braided shield tied to the coupling nut.
TURCK shielded cordsets with the shield tied to the coupling nut offer complete shielding for the entire length of the
cordset. A metal sleeve inside the molded body connects the braid/foil shield of the cable to the metal coupling nut with no
loss of shielding potential.
TURCK armored cordsets are the ultimate in shielded connectors. A TURCK patented process allows the interlocked
aluminum armor to be connected directly to the coupling nut offering the same protection as running conductors inside
metal conduit.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K246
TURCK
Process Wiring Products
IP Protection Class
Dust Protection
2_
Objects 12.5mm
3_
Objects 2.5mm
4_
Objects 1.0mm
5_
Dust
Protected
6_
Dust Tight
IP 10
IP 20
IP 30
IP 40
IP 50
IP 60
_1
Dripping Water
IP 11
IP 21
IP 31
IP 41
IP 51
IP 61
_2
Dripping Water on
15 slant
IP 12
IP 22
IP 32
IP 42
IP 52
IP 62
IP 23
IP 33
IP 43
IP 53
IP 63
_4
Splashing Water
IP 34
IP 44
IP 54
IP 64
_4K
Splashing Water
High Pressure
IP 34K
IP 44K
IP 54K
IP 64K
_5
Jet Water
IP 55
IP 65
_6
Intense Jet Water
IP 56
IP 66
_6K
Intense Jet Water
High Pressure
IP 56K
IP 66K
IP
_0
Unprotected
Water Protection
_3
Spraying Water
0_
Unprotected
IP 00
1_
Objects 50mm
_7
Temporary immersion
IP 67
_8
Continuous
immersion as
specified by
manufacturer
IP 68
_9K
Water at high
pressure/Steam jet
cleaning
K247
IP 69K
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
IP 67 Protection
First ID Number
Protection from penetration of…
0
Unprotected
1
Solid Foreign Particles Ø50 mm
2
Solid Foreign Particles Ø12.5 mm
No full penetration of sphere with Ø12.5 mm
3
Solid Foreign Particles Ø2.5 mm
No penetration of rod with Ø2.5 mm
4
Solid Foreign Particles Ø1.0 mm
No penetration of wire with Ø1.0 mm
5
Dust
Dust may only penetrate in such quantity that
function and safety are not impacted
6
Dust
No penetration of dust
Second ID Number
Protection from penetration of…
0
Unprotected
1
Dripping water
Vertically falling drips may not cause any damage
2
Dripping water when the enclosure is in a slanted
position of up to 15°
Vertically falling drips may not cause any damage
3
Spraying water
4
Splashing water
Water splashing against the enclosure from every
direction may not cause any damage
4K
Splashing water with increased pressure
Water splashing against the enclosure from every
direction and with increased pressure may not
cause any damage
5
Jet water
Water which is hosed against the enclosure from
every direction may not cause damage
6
Intense jet water
Water which is hosed against the enclosure with
high intensity may not cause any damage
6K
Intense jet water with increased pressure
Water which is hosed against the enclosure with
high intensity and increased pressure may not cause
any damage
Temporary immersion in water
Water may not enter the enclosure in such quantity
as to cause damage when the enclosure is held
under water for a set period of time using
predetermined pressure (1 m for 30 min)
Continuous immersion in water
Water may not enter the enclosure in such quantity
as to cause damage when the enclosure is held
under water for a set period of time using
predetermined pressure (TURCK standard is 6’ of
water, and other chemicals, for a period of 24
hours)
Water at high-pressure/steam jet cleaning
Water which is directed against the enclosure from
every direction with extremely high pressure may
not cause any damage
(14 to 16 l/min at 8,000 to 10,000 kPa)
7
8
9K
Requirements
N/A
No full penetration of sphere with Ø50 mm
Requirements
N/A
Spraying water, which is sprayed in a perpendicular
angle of up to 60° may not cause any damage
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K248
TURCK
Process Wiring Products
NEMA Standards
NEMA
NEMA 1
NEMA 2
NEMA
12
NEMA
13
NEMA 3
NEMA
3R
NEMA 4
NEMA
4X
NEMA 6
NEMA
6P
Rating Type
Protection against:
Test
Number
Incidental Contact
6.2
Falling Dirt
6.2
Rust
6.8
Circulating Dust, Lint, Fibers
(nonhazardous)
6.5.1.2(2)
Windblown Dust
6.5.1.1(2)
Falling Liquids/Light Splashing
6.3.2.2
Rain
6.4.2.1
Rain
6.4.2.2
Snow and Sleet
6.6.2.2
Hose Down and Splashing
Water
6.7
Occasional Prolonged
Submersion
6.11(2)
Oil and Coolant Drip
6.3.2.2
Oil and Coolant, Spray/Splash
6.12
Corrosive Agents
6.9
K249
Indoor
Outdoor
Indoor/Outdoor
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
NEMA
6.2 Rod Entry Test - a ½" diameter rod may not enter the enclosure and a 1/8" rod cannot enter within 4" of live
components
6.3 Drip Test - 20 drops per minute for 30 minutes with no water entering enclosure 6.3.2.2 Evaluation, no water shall
enter enclosure
6.4 Rain Test - All exposed surfaces are sprayed with 5 psi of water for 60 minutes at a rate of 18" per hour rise in a straight
sided pan 6.4.2.1 Evaluation, No water shall have reached live parts, insulation, or mechanisms 6.4.2.2 Evaluation, No
water shall have entered enclosure
6.5.1.1 (2) Outdoor Dust Test (alternate method) - Stream of water at 45 gallons per minute from a 1" diameter nozzle,
from all directions at a distance from 10' to 12'. Test time is a minimum of 5 minutes. No water shall enter enclosure.
6.5.1.2 (2) Indoor Dust Test (alternate method) - Atomized water at 30 psi is sprayed from all directions from a distance
of 12" to 15" at a rate of 3 gallons per hour. No water shall enter enclosure.
6.6 External Icing Test - The enclosure is sprayed with water between 0°C and 3°C in a room at 2°C. The spray is between
1 and 2 gallons per hour per square foot. Spray for 1 hour. The room temp is then dropped to between -7°C and -3°C with
the spray still going. Ice needs to build up on a test bar at a rate of 1/4 inch per hour. Spray continues until 3/4 inch of ice
is on the enclosure. Room temperature is maintained for at least 3 hours. 6.6.2.2 Evaluation, enclosure is undamaged after
ice has melted.
6.7 Hose down Test - Stream of water at 65 gallons per minute from a 1" diameter nozzle from all angles at a distance of
10' to 12'. Test time is 48 seconds times (height + width + depth of enclosure in feet) or a minimum of 5 seconds. No
water shall enter enclosure.
6.8 Rust Resistance Test - only applicable to enclosures incorporating external ferrous parts
6.9 Corrosion Protection - Test per UL 508, 6.9 or 6.10.
6.11 (2) Air Pressure Test (alternate method) - Enclosure is submerged in water at a pressure equal to a depth of 6' for 24
hours. No water shall enter enclosure.
6.12 Oil Exclusion Test - Stream of test liquid at 2 gallons per minute from a 3/8" nozzle for 30 minutes. Water with 0.1%
wetting agent is directed from all angles from a distance of 12" to 18". No test liquid shall enter the enclosure.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K250
TURCK
Process Wiring Products
Conversion Chart
AWG to Metric
AWG
Diameter
mm
Section
mm 2
8
10
12
14
16
18
20
22
24
26
28
30
3.26
2.59
2.05
1.63
1.29
1.024
0.813
0.643
0.511
0.405
0.32
0.255
10
6
4
2.5
1.5
0.75
0.5
0.34
0.25
0.14
0.05
0.05
Thread Conversion Chart
Cable Length Tolerance Chart
PG to Metric
K251
All Lengths
PG
Diameter (mm)
Strip Length
Diameter (mm)
7
9
11
16
12
16
20
25
0-7 mm
8-29 mm
30-49 mm
50-69 mm
70-100 mm
Over 100 mm
±0.5 mm
±1.0 mm
±2.0 mm
±3.0 mm
±4.0 mm
±5.0 mm
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
Installing Cable Products in Accordance with the National Electrical Code (NEC)
The NEC is a set of guidelines for installation of electrical devices, including cables, meant to reduce the risk of electrical
shock, fire, etc. The NEC is simply a code and local laws may or may not require installation based on the NEC. Check
local laws for applicability.
The NEC generally does not cover cables installed inside a machine. Any cables installed in an exposed manner, on the
outside of a machine or from one machine to something else, must be an approved type and installed in accordance with
the appropriate NEC articles.
UL (Underwriters Laboratory) and CSA (Canadian Standards Association) are the primary sources in North America for
approving cables to specific standards. While a cable installed within a piece of machinery does not fall under the NEC,
most people want to install an approved cable. TURCK cables have both UL and CSA approvals. Many of these approvals
are the UL AWM (Appliance Wiring) approvals and are acceptable for use in a UL approved device. A UL Listed cable may
be installed outside a machine per the NEC standards. UL Listed cables available from TURCK include NEC designations for
hard duty cables (SOOW, SJOOW, STOOW, SEOW), armored cables (MC), and tray-rated cables (PLTC, ITC).
Hard duty cables designations are:
S - Service Grade (600V)
SJ - Service Grade Junior (300V)
ST - Service Grade Thermoplastic (600V)
SE - Service Grade Thermoplastic Elastomer (600V)
O - Oil resistant jacket material
OO - Oil resistant jacket and conductor insulation
W - Weather proof
TURCK armored cables are available in 3 different configurations. Type MC cables, type MC cables with ITC/PLTC
approvals and simply ITC/PLTC approved. Armored cables with ITC/PLTC approvals may be installed in an exposed run
without being offered additional mechanical protection.
Tray-rated cables from TURCK include Instrument Tray Cable (ITC) and/or Power Limited Tray Cable (PLTC).
TURCK NEC type approved cables are dual listed with other UL type approvals. For example, the RKM 126-*M cordset has
a 12 conductor 16 AWG cable with UL AWM 600V approval and ITC/PLTC approval.
Please refer to the NEC and local laws for specific installation requirements based on your environment.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K252
TURCK
Process Wiring Products
Cable Applications
Proper management of cabling systems can mean the difference between a dependable and smooth operating installation
and costly reoccurring down time. The suggestions outlined below illustrate some of the common sources of problems and
provide simple and effective solutions.
Proper Bend Radius for Fixed and Moving Applications
Providing sufficient bend radius will allow the cable to absorb the energy of bending over a greater portion of its length,
increasing its effective working life. Small increases in the radius of the bend can produce substantial increases in cable life.
Fixed Applications:
Minimum bend radius 5x cable diameter
Moving Applications:
Minimum bend radius 10x cable diameter
Eliminating Stress Points in Cable Dress
Installing cables to allow for adequate stress loops and freedom of motion increase the life of the cables. TURCK cordsets
incorporate molded strain reliefs that will assist in preventing stress.
Tie Down Loops
Correct
K253
Strain Relief
Incorrect
Correct
Incorrect
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
Cable Bundling Techniques
When bundling several cables together, always keep the bundle loose enough to move within itself. Tightly tied bundles
create both compression and tension stresses when the bundle is moved.
Correct
Incorrect
Cabling for Motion Applications
Where cabling is subjected to linear, angular or rotational motion between two points, always allow adequate cable length
to absorb the energy imparted by the motion. Use of coiled cords, mechanical support mechanisms, or large, well
supported cable loops will maximize cable life.
Coil Cord
"C" Track
Cable Loop
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K254
TURCK
Process Wiring Products
Tying Cables with Cable Ties
When tying cable with self locking cable ties, always leave the ties loose enough for the cables to slide freely under the tie.
Over tightening will create stress concentrations that can cause the conductors to fail prematurely. Never tighten the tie to
the point where the cable jacket becomes deformed or pinched.
Correct
K255
Incorrect
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
Process
Automation
Installation Instructions for TURCK’s minifast ® and eurofast ® Connectivity Products
Follow these simple steps to ensure that your TURCK connectivity products are installed for best performance and safety.
Step One:
Many instruments are available with a TURCK receptacle pre-installed. If a receptacle is already installed, proceed to Step
Two. If field installation of a receptacle is necessary, feed the receptacle leads through the instrument's conduit entry and
thread the receptacle into the entry threads. Receptacles with NPT threads should be tightened per the requirements for
NPT conduit fittings. Receptacles with straight threads (M20 or NPSM) should be tightened to deflect the O-ring just
sufficiently to effect a good seal. The receptacle leads should then be connected to the terminals of the instrument. Consult
the instrument manual for terminal identification and preferred method of connection. Also, please refer to the product
catalog or online at www.turck.com for the pin-out of the receptacle.
Step Two:
minifast connectors are designed to industry standards SAE H1738 and ANSI/B93.55M. The environmental seal for mated
connectors is formed by the 'cork and bottle' design of the pin and socket carriers in which each connection chamber is
individually sealed. The connection must be properly secured to achieve this seal, as well as to ensure a good electrical
performance.
The keyed cordset should be aligned with the key on the instrument receptacle. The cordset should then be pushed into
the receptacle and the coupling nut turned until hand tight. The cordset should then be pushed firmly into the receptacle a
second time and the coupling nut hand tightened again. This generally allows an additional 1/8 - 1/4 turn and ensures that
a tight, weather-proof connection is made. No tools should be used in tightening the connections, as damage to the
contacts could occur if the connection is over-tightened.
eurofast connectors are designed to industry standard SAE H1738.
The environmental seal for mated connectors is formed by an
O-ring seal. The connection must be properly secured to achieve
this seal, as well as to ensure a good electrical performance.
The keyed cordset should be aligned with the key on the
instrument receptacle. The cordset should then be pushed into
the receptacle and the couple nut turned until hand tight. While
rotating the coupling nut, the installer may notice a 'ratcheting' sensation. This is an anti-vibration feature designed to
maintain the connection in high-vibration environments. No tools should be used in tightening the connection, as damage
to the contacts could occur if the connection is over-tightened.
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K256
TURCK
Process Wiring Products
Installation Instructions for TURCK’s minifast ® and eurofast ® Connectivity Products
Step Three:
Most TURCK process wiring products are designed and approved for use in hazardous locations. If the installation is in a
hazardous location, there may be additional actions necessary, such as locking the connection with a lokfast™ guard (as
shown in the figure below), using an approved energy limiting source of power, or ensuring that the instrument has the
appropriate approval. FM approved control drawings detail the requirements for compliant installation of TURCK products.
The appropriate control drawing number will be identified in the product markings and may be viewed or downloaded
from www.turck.com/fmcd. Consult the instrument manual to ensure the instrument has the appropriate approval and to
determine if the approval imposes any additional constraints.
K257
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.barr-thorp.com
www.turck.com
TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123
www.turck.com
www.barr-thorp.com
K258
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement