RELEASE NOTES Vulcan Software, Release 2014 v2 TRIMBLE MEP

RELEASE NOTES Vulcan Software, Release 2014 v2 TRIMBLE MEP
Vulcan Software, Release 2014 v2
Trimble is pleased to offer Release 2014 v2 of the Vulcan software. This document provides
enhancement/modification information pertaining to this release. The 2014 v2 release includes the following:
One Vulcan Installation DVD
Let’s Get Started sheet
Update Information
The Let’s Get Started document provides abbreviated steps required to install this update. While this
document provides some information, it is not all-inclusive.
The Update Installation Instructions document is available under the Vulcan Documentation link on the
installation DVD. Trimble recommends that you print, review, and follow the instructions to ensure that the
software program runs properly after installation.
Trimble also highly recommends that you review the ReadMe document, which is available on the Vulcan
installation DVD. This document contains additional helpful information pertaining to this release.
When importing from Trimble® DuctDesigner 3D®, the Burn/Don’t burn option for round fitting collars
now works as expected.
Labels will now print liner thickness with 2 decimal places.
The software will now place the proper connectors on a rectangular body with a tap (instead of swapping
For round offset fittings #318 and #320, a dimensional offset value has been added to the labels.
Taps will now be included in the shipping list as expected.
When entering the exiting end of drop cheek elbows larger than the entering end, the exiting end
connector now updates properly.
Under some circumstances, an invalid error message displayed when entering flex connector fittings. This
message has been removed from the system.
Trimble® Tracking for Vulcan
The Trimble Tracking for Vulcan software now includes compatibility with Android™ mobile devices.
This document is for informational purposes only and is not a legally binding agreement or offer.
Trimble makes no warranties and assumes no obligations or liabilities hereunder.
© 7/16/14, Trimble Navigation Limited. All rights reserved. Trimble, the Globe & Triangle logo are trademarks of Trimble Navigation
Limited, registered in the United States and in other countries.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF