GB MANFROTTO photo catalogue2007
PROFESSIONAL PHOTO SUPPORTS
2006/07
INTRO
For 35 years, Manfrotto has been building the world’s widest range of tripods, heads and dedicated accessories to support professional and semi-professional still camera, from the traditional small, medium and large format to the latest digital camera. Every
product in our range is designed to provide a perfect combination of important features such as: load capacity, size, stability,
transportability, interchangeability and construction quality - guaranteeing unique, inimitable reliability and longevity. Carefully
combined characteristics offer you the greatest possible positioning freedom, matched with a sturdiness that ensures outstanding
performance no matter what system, type or camera format you use. From 3 or 4 section aluminum carbon fiber tripod legs to 3D,
geared or center ball heads in magnesium or aluminum, the range responds to all photo demands and is backed up by an even
greater range of accessories. How can we be so sure we can answer all demands? Because we always stay close to our exacting
professional users throughout the world, and are always ready to take up their suggestions, comments and desires to improve
our products and our service to you.
Manfrotto supports your creativity without compromise!
MANFROTTO & SUDHARAK OLWE, A PHOTO DOCUMENTARY.
We’re lucky enough to see amazing images from around the world as part of our everyday research and work,
but nothing could have prepared us for Sudharak Olwe’s incredibly compassionate, at times very uncomfortable but always powerfully thought-provoking photo DOCUMENTARY on the lives of Mumbai’s “Conservancy
Workers” - in other words, the street sweepers, refuse collectors and drain cleaners of one of the world’s most
populous cities.
We asked Sudharak if we could present some of his work in this catalog so more people would have a chance
to see the images, and we’re very grateful that he agreed. If you’re reading this catalog, we assume you’re at
the beginning of a personal cycle of consumption that will almost inevitably end, with everyone else’s, in the
huge amounts of waste that we produce day-in, day-out... while we’re thankful that you may be considering
purchasing our products, please “consume responsibly” and spare more than a thought for those whose job it
is to clean up after us all.
2 photo
INTRO
MANFROTTO,
SINCE 1972
A LONG HISTORY
SUPPORTING
PHOTOGRAPHY.
1960
Lino Manfrotto was a photo reporter. The photographer’s studio equipment was cumbersome, heavy and did not
facilitate the work of professionals. Thus Lino Manfrotto made his first products, including a light stand that was finally
sturdy enough.
1972
...he soon realized that his production capacity was insufficient to address orders from customers, and within just a few
short years a leading enterprise on a world level was developed.
1974
...the first Manfrotto tripod, the 028, was launched. Innovative, light and versatile, Manfrotto tripods and stands became
an important part of every photographic studio in the world. The competitors followed and copied, but were unable to
match Manfrotto’s innovation, quality, performance and service.
1975
...the first photo head which completed the product range for professional photographers was the mythic 029, that we
have just replaced, after 30 years of glorious life, with the 804RC4.
1986
The world of photography began to change asking for articles that met amateur photographers needs: the 058 tripod was
the answer of Manfrotto.
1997
The 390 is the first example of all-in-one tripod+head, and it goes back to 1997.
2002
The first electronic devices are the video remote controls.
2003
Neotec, the “quickest and simplest tripod in the world” still receives international awards.
Today
In recent years, the advent of digital technology has been profoundly changing the sector of photography and video and
is creating millions of new enthusiasts. Manfrotto has anticipated this trend and is capitalising on its own experience in
order to promote new solutions for photographers and videographers worldwide.
CONTENTS
Introduction
How to choose the right tripod
Pro tripods
Challenge tripods
Discover tripods
Attitude tripods
How to choose the right head
Geared heads
Three-way heads
Two-way heads
Ball heads
Vr heads
2_3
4_5
6_11
12_17
18_21
22_29
30_31
32_33
34_36
37
38_43
44_49
Monopods
Dollies and Spreaders
Accessories
Additional feet
Plates
Tripod Bags
Tripod Carrying Systems
How to lessons
Local heroes
Educational
Index
50_51
52
53_57
58
58_59
60_61
62_63
64_65
66_67
68_73
74_75
foto
photo00
3
TRIPODS
HOW
TO CHOOSE
THE RIGHT
TRIPOD
The best way to pick the ideal photo tripod is normally to
start from the head. Why? Because it’s the head that
photographers will find themselves using and adjusting
most often during a shoot. Selecting a compatible tripod
then starts from looking at its maximum load, which
must at least cover the combined weight of the
head and the camera equipment to be mounted on it.
The tripod need not be oversized - a bigger,
sturdier tripod will normally be heavier too, and the
heavier the tripod, the lower the chances of you carrying
it with you when you really need it... as they say, “the
best tripod is the one you take with you.”
To give you a rough guide, we’ve divided the complete
photo tripod range into four main families: PRO (our top
of the range photo tripods and studio column stands
that give new meanings to sturdiness and stability;
for loads up to 30kg, including large format view
cameras and very heavy tele lenses), CHALLENGE
(true all-round pro tripods equally at home in the studio
and on location, with load capacities up to 8kg, the 055
and other Challenge tripods are ideal for both SLR and
Medium Format equipment, offering a complete set of
features and higher, more comfortable extended
heights), DISCOVER (lightweight, small-sized tripods
with professional design, build quality and features load capacity up to 4kg. Includes our best-selling 190
series models) and ATTITUDE (compact, all-in-one
tripods with built-in heads for small film and digital
cameras up to 2.5kg).
KEY TO SYMBOLS
Closed
Lenght
4 photo
Minimum
Height
Maximum
Height
Maximum
Height
with
extended
center
column
Footprint
Diameter
• Maximum
Load
Capacity
Weight
• All stated
maximum load capacity
are measured centred on the
tripod/head mounting point.
Head
Height
Plate
Supplied
with the
Head
Suggested
Dolly
TRIPODS
PRO
CHALLENGE
DISCOVER
ATTITUDE
Do you have a professional vision?
The answer to all of your studio needs lies in this PRO range of tripods to
stabilize the extra loads associated
with large format cameras and lenses.
These tripods are seen in all studio
environments from fashion to commercial; from schools to cruise
ships. Rugged, tough and strong,
the PRO range will outlast many
generations of cameras and provide
decades of support.
Take the challenge!
The one-and-only professional’s
companion. Grounded in tradition
and simplicity yet featuring the latest
innovations, these tripods take your
mind off the science of photography
allowing you to focus on the art. They
are tough and light enough for all your
travel and location needs, while being
solid and flexible for studio work.
What do you like to discover?
Strong yet portable, these Manfrotto
tripods provide the professional edge
needed to get the shot, yet they are
slender and short enough to take on
your next trek. This type of tripod
has criss-crossed the world to
support Digital SLR’s that capture
the images found on the front pages
of your favorite magazines.
Have you got the attitude?
Designed for the first-time photographer, a stable support for their camera without the hassle. Small, portable,
compact and extremely affordable,
these tripods can be taken virtually
anywhere as they compliment the
size and weight of today’s digital
point-and-shoot cameras. How many
blurry shots do you have of a concert
or night scene? With these Manfrotto
tripods your cityscapes will come
out beautiful every time.
IF YOUR DECISION IS GUIDED FIRST AND FOREMOST BY HEIGHT RANGE, TRIPOD WEIGHT/SIZE AND STABILITY, THEN
CHOOSE YOUR TRIPOD FIRST, AND THEN SELECT THE HEAD THAT MATCHES THE TRIPOD.
Everybody’s dream is to own a tripod which weighs nearly
nothing and fits in your pocket but is able to support one ton of
equipment at 10 meters!
We need to make trade-offs. Below is a simple chart, which
shows the load, and relevant height that will provide a proper
support for your equipment.
heavy weight
(more stable)
lightweight
(easy to carry)
HIGH LOAD, OR COMPACT AND LIGHT?
PRO
CHALLENGE
DISCOVER
ATTITUDE
WHICH CAMERA?
The latest digital revolution has expanded the world of photographic cameras. Based on the camera’s weight, the chart shows
the tripods we suggest to use to achieve rock solid support.
Point and shoot analog digital camera
PRO
CHALLENGE
Advanced analog digital camera
Slr digital camera below 10 million pixels
DISCOVER
Slr analogue or digital camera above 10 million pixels
Medium format camera
ATTITUDE
Large format camera
WHAT HEIGHT RANGE?
Sometimes we choose a tripod only by its maximum height
without paying much attention to its minimum height. The chart
indicates the range of working heights offered by our line of
tripods.
good angle
medium angle
low angle
PRO
CHALLENGE
DISCOVER
ATTITUDE
photo 5
PRO TRIPODS
PRO
TRIPODS
The Manfrotto PRO tripod range has been specifically
designed to hold shooting equipment that is bulky and
heavy such as SLRs equipped with long tele lenses,
and medium format or large format cameras. To
provide the accuracy and capability needed to support
and put in position cameras weighing from 8 to 20 kilos
each tripod has a center column made of a “non-rollback”
three- faceted tube controlled by a gear mechanism;
legs made of a combination of extruded and electric
welded aluminum tubes; a reinforced die casting
aluminum top spider and an adjustable mid level
spreader system. Depending on the model, the leg
locking system can be the traditional turning locking
knob, the quick action levers or the time tested
automatic leg lock and release system used on the
Triaut. The tripods in this range differ in size and weight depending on the minimum/maximum height
needed and the load of equipment to support, but
each tripod meets all professional photographers’
requirements for indoor or outdoor assignments.
100cm
90cm
80cm
70cm
60cm
50cm
40cm
30cm
20cm
10cm
0cm
161MK2B
6 photo
058B
028B
475B
PRO TRIPODS
SUPER PRO TRIPOD 161MK2B
105cm
44cm
267cm
242cm
7.95kg
20kg
114/181B
The tallest tripod in the range. Capable of providing a stable platform for cameras up to 20kg at a maximum height of 2.67m! (On the other hand this giant is also
capable of a minimum height of 44cm!). The geared center column is self-locking. The legs are braced using telescopic struts for maximum rigidity and the ability to
have individually adjustable and lockable angles. Rubber feet with retractable spiked feet and level are standard equipment. Ideal for all large format cameras.
Diameter legs in mm: 40, 35, 30.
Suggested Heads
GEARED HEADS
THREE-WAY HEADS
BALL HEADS
pag. 32 400, 405
pag. 34 160, 229, 808RC4
pag. 38 468MG series, 488 series, 490, 490RC4
photo 7
PRO TRIPODS
TRIAUT TRIPOD 058B
94cm
44cm
217cm
191cm
6.15kg
12kg
127/127VS/181B
The 058B Triaut is one of the most exciting tripods in the whole Manfrotto range, featuring patented simultaneous release of all three legs or any individual leg. This
permits the legs to be extended, the tripod levelled (spirit level provided) and locked in seconds without ‘ fiddling’ with individual leg adjustments. Telescoping the legs
is achieved by activating the same release. Other important features of this very professional tripod are the ability to adjust all angles individually and secure them with
Manfrotto telescopic struts. Favoured for medium format up to large. Rubber feet with retractable spiked feet are standard. Includes carryig strap.
Diameter legs in mm: 30, 25, 20.
The 058B features a patented simultaneous or individual leg release system that permits the legs
to be extended, the tripod leveled (spirit level included) and locked in seconds without the need
for individual leg adjustment.
Suggested Heads
GEARED HEADS
THREE-WAY HEADS
BALL HEADS
8 photo
pag. 32 400, 405
pag. 34 160, 229, 808RC4
pag. 38 468MG series, 488 series, 490, 490RC4
PRO TRIPODS
TRIMAN TRIPOD 028B
82cm
77cm
227cm
179cm
4.15kg
PRO GEARED TRIPOD 475B
12kg
181B
Strong, sturdy and reliable, the Triman tripod is the ideal studio tripod. The
geared center column has a non roll-back feature and has a threaded 3/8”
mount on the bottom of the column to allow low angle shots.
Twin shank leg design, built-in spirit level and rubber feet with retractable
spikes are standard features.
The tripod uses a center column strut design for added stability. Includes a
mid level spreader and carrying strap. Ideal for cameras up to medium format.
Diameter legs in mm: 25, 20, 19 tandem.
Suggested Heads
GEARED HEADS
THREE-WAY HEADS
BALL HEADS
80cm
43cm
188cm
162cm
4.3kg
12kg
114/181B
All aluminum construction and unrivalled in stability, the 475B Pro Geared
Tripod incorporates a unique center brace structure system, reliable
quick-action leg locks, non-rollback three fac ted center column, spirit
level and rubber/metal spiked feet. The revolutionary center brace system
can be operated in a symmetric or asymmetric way. This allows you to
achieve two important results: fast positioning by locking the braces so
that all of the legs willspread to the same angle and open instantly, or
individual setting of the angle of each leg for the ultimate in tripod flexibility.
To avoid annoying delays in leveling the tripod, the telescopic center braces
have been designed with two “click stop” positions that allow you to easily
find the same spread angle on all three legs. The second improvement has
been made to the leg locking system.
Diameter legs in mm: 35, 30, 25.
pag. 32 400, 405
pag. 34 160, 229, 808RC4
pag. 38 468MG series, 488 series, 490, 490RC4
photo 9
PRO TRIPODS
CAMERA STUDIO STANDS
The Manfrotto range of studio stands offers professionals in the studio rock steady support for cameras of all formats. Each stand has a column in black anodized extruded
aluminum and is available with either a sliding or a geared horizontal cross arm that can be raised or lowered and moved precisely from side to side to achieve the exact
position for the perfect shot. The studio stands have a rigid steel base for stability and incorporate wheels to move them effortlessly around the studio; a break system
locks the stand in the required position. Manfrotto studio stands with their practical range of accessories are the cost effective solution to your camera support needs.
Arm
Base
Camera
Manfrotto Studio Stand Load Capacity
For safety reasons we have decided to provide two values of load capacity for
our Studio Stands, please refer to the drawing above.
Higher load value refer to the max load capacity used on the arm of the studio
stand when you operate inside the base semicircle (grey area).
Lower load value refer to the max load capacity used on the arm of the studio
stand when you operate outside the base semicircle (red area).
Studio Stand Mini Salon code 800 do not mount sliding horizontal arm so the
load capacity value refers only to a vertical use.
KEY TO SYMBOLS
Working Working Stand
Stand
base
height
height
height
minimum maximum dimension
Stand
weight
Maximum Maximum
load
load
capacity capacity
MINI SALON 800
92cm
162cm 85x54cm 162cm
23kg
8kg
Sturdy, compact, and surprisingly affordable, the versatile Mini Static can
handle cameras from 35mm to 4x5” formats. Ideal for I.D., passport work
and portraiture. Pneumatically damped black anodized aluminum column
extends from a minimum of 92cm to a height of 162cm. A 3/8” male thread on
column top allows direct mounting of head. Cast iron base has two pivoting
wheels for easy movement and individual locks.
Compatible accessories: 120, 131DB, 131DDB, 820, 828, 844.
800
806
816
809
MINI SALON 190 806
56cm
182cm 85x54cm 190cm
34kg
5kg-10kg
Designed for 35mm and medium format cameras, the Mini Salon 190 allows
working heights from 56cm to 182cm. Counter-balanced column is
black anodized aluminum and is mounted on a heavy cast iron base
with two pivoting wheels which lock firmly into place with individual
wheel locks. Features smooth operating counter balanced horizontal
gear driven crossarm, supplied complete with camera support platform.
The crossarm support casting features a built-in accessory tray 20x28cm.
Arm length: 80cm.
Horizontal arm length: 75cm.
Compatible accessories: 120, 131DB, 131DDB, 828, 840, 842, 844.
SALON 230 809
57cm
221cm 94x69cm 232cm
64kg 13kg-15kg
Just slightly lighter in construction, the Salon 230 has a 8cm diameter
black anodized aluminum column with a working height of 221cm provided
with an adjust-able counter-balanced sliding horizontal 80cm crossarm.
The camera support platform allows movement in a solid angle of 360°. Large
sized wheels in the heavy cast base and single pedal control facilitate
easy positioning and quick, rock steady locking. The crossarm support
casting features a built-in accessory tray 33x28cm. Supplied complete
with camera support platform and counter-balanced crossarm.
Arm length: 80cm
Horizontal arm length: 70cm.
Compatible accessories: 120, 131DB, 131DDB, 820, 822, 824, 826, 828, 834, 844.
10 photo
SUPER SALON 280 816
60cm
274cm 100x70cm 284cm
80kg 13kg-15kg
Our Top-of the-Line stand, the Super Salon 280 brings the ultimate in stability
to new heights in your studio. The rugged column in mounted on a heavy-duty
cast “T” base easy to move around because of its smooth-rolling wheels. They
can be locked into position with just one step on the single control pedal. The
Super Salon 280 has a 10cm diameter black anodized aluminum column and
a 100cm horizontal camera arm that travels 62cm. Arm has precise rack and
pinion drive, and is accurately counter-balanced to move smoothly up and
down. The camera support platform allows movement in a solid angle of 360°.
Supplied with counter-balanced crossarm, camera support platform and
accessory tray.
Arm length: 100cm
Horizontal arm length: 90cm.
Compatible accessories: 120, 131DB, 131DDB, 820, 822, 824, 826, 828, 834, 844.
SUPER SALON 230 816/1
60cm
224cm 100x70cm 230cm
80kg 20kg-25kg
Same as 816 but with 230cm height.
Arm length: 100cm
Horizontal arm length: 77cm.
Compatible accessories: 120, 131DB, 131DDB, 820, 822, 824, 826, 828, 834, 844.
Adds 45cm to crossarm. Mounts directly into arm and accepts any camera
platform.
For model 800, 809, 816 and 816/1.
LOW ANGLE ADAPTER ARM 822
Connection bracket between the horizontal arm and the column extension
which permits to increase or decrease the shooting point compared to the
horizontal arm.
For model 809, 816 and 816/1.
90° ADDITIONAL REVOLVING HEAD 824
With 3/8” threaded fitting.
For model 809 and 816.
ADDITIONAL CAMERA HOLDER 826
This optional camera holder allows to put a second camera on the horizontal
arm of your Studio Stand.
For model 809, 816 and 816/1.
HORIZONTAL BRACKET WITH
TWO CONNECTIONS 828
Allows two camera mounting positions.
For model 800, 806, 809, 816 and 816/1.
ADDITIONAL COUNTER-WEIGHT 834
2kg additional counter-weight. To be screwed to the counter-weight inside
the column.
For model 809, 816 and 816/1.
ADDITIONAL CAMERA MOUNT 840
This optional camera holder allows to put a second camera on the horizontal
arm of your Studio Stand.
For model 806.
90° CAMERA MOUNT 842
90° additional revolving head.
For model 806.
UTILITY TRAY 29X29CM 844
Optional accessory tray makes it easy to keep meters and extra film holders
at arms length.
For model 800, 806, 809, 816 and 816/1.
ADAPTER FROM 3/8” TO 1/4” 120
Converts tripod head screw from 3/8 “ to 1/4”.
For model 800, 806, 809, 816 and 816/1.
ACCESSORY ARM
FOR 4 HEADS 131DDB
ACCESSORY ARM 131DB
Similar to the 131DB with the addition of two positional head mounts on the
side arm allowing the possible mounting of four heads.
For model 800, 806, 809, 816 and 816/1.
Mounts on any column with 3/8” thread, this side arm allows positioning of
two heads on a 90° perpendicular angle.
For model 800, 806, 809, 816 and 816/1.
photo 11
ACCESSORIES CAMERA STANDS
45CM COLUMN EXTENSION 820
CHALLENGE TRIPODS
CHALLENGE
TRIPODS
The Manfrotto lightweight PRO tripod range adopts the
same construction as the lightweight series of tripods,
but has been resized to handle not only analog and digital
SLR cameras, but also heavier medium format shooting
equipment, spotting scopes and professional MINI DV
camcorders. To offer the necessary sturdiness and
stability, we have increased the diameter of the legs,
locking collars and top spider. With the introduction
of the Neotec tripod, as well as the innovation of the
MAGFIBER, this family of products is one of the most
advanced support systems available in the market.
60cm
50cm
40cm
30cm
20cm
10cm
0cm
055MF3
12 photo
055MF4
055PROB
055CLB
055DB
458B
CHALLENGE TRIPODS
MAGFIBER PRO TRIPOD
3 SECTION 055MF3
64cm
11cm
169cm
134.5cm
2kg
MAGFIBER PRO TRIPOD
4 SECTION 055MF4
7kg
127/127VS
Specifically designed for extreme outdoor assignments, this tripod uses the
same construction as the 055PROB but uses different materials for the legs and
all metal parts. Like the 055PROB, the 055MF3 has a three-faceted aluminum
center column, which can offset the pressure of the locking system and
the torsion caused while in the horizontal position. The legs are constructed
of 1.2mm carbon fiber tube combined with magnesium die-casting,
quick-action lever locking collars made of magnesium die-casting. Each leg
can be set independently in one of four angle settings using the dedicated
quick-action leg angle selector. The top spider is made of magnesium
die-casting, and includes the clamping system for the dual position center
column plus a built-in bubble level. To assure the best thermal resistance, all
parts have been assembled using a proven pressure clamping technology
that eliminates failure-prone glue joints for greater durability and in-the-field
serviceability. A hand-padded carrying strap, supplied with the tripod,
can also operate like a hook to hang weights from in order to increase the
stability of the tripod during shoots in extreme wind conditions. It is ideal
support for all SLR analog/digital camera equipment, medium format
cameras and spotting scopes modified for digiscoping applications.
PATENTED
Suggested Heads
GEARED HEADS
THREE-WAY HEADS
TWO-WAY HEADS
BALL HEADS
pag. 32
pag. 34
pag. 37
pag. 38
54cm
11cm
165cm
130.5cm
2kg
7kg
127/127VS
Same as the 055MF3 but more compact due to the 4-section legs. This tripod
can even fit in a backpack.
PATENTED
405, 410
808RC4
128LP, 128RC, 701RC2
468MG series, 488 series, 322RC2
photo 13
CHALLENGE TRIPODS
On models
055PROB-055MF3-055MF4:
dual positioning center column.
On models
055PROB-055MF3-055MF4:
redesigned low angle adapter
built-in the center column.
PRO TRIPOD 055PROB
65cm
11cm
176cm
135cm
2.4kg
7kg
127/127VS
Designed for the professional photographers, this is an extremely versatile tripod, ideal for small, medium format cameras, digital or conventional type. The tripod has
a special center column support that just as easily re-fits as a horizontal lateral arm, this allows the camera to be offset from leg position, and provides the simplest
way possible to shoot from directly overhead. The incredible flexibility of the leg angle setting (90°) has forced us to design a special low angle adapter that has been
incorporated in the center column. To complete the selection of accessories included a set of two leg warmers.
Diameter legs in mm: 30, 25, 20.
PATENTED
Suggested Heads
GEARED HEADS
THREE-WAY HEADS
TWO-WAY HEADS
BALL HEADS
14 photo
pag. 32
pag. 34
pag. 37
pag. 38
405, 410
808RC4
128LP, 128RC, 701RC2
468MG series, 488 series, 322RC2
CHALLENGE TRIPODS
On model 055CLB:
low angle adapter stores
on bottom of center column.
CLASSIC TRIPOD 055CLB
61cm
8cm
178cm
135cm
2.3kg
BASIC TRIPOD 055DB
7kg
127/127VS
The 055CLB Classic is one of the most versatile and popular tripods in the
Manfrotto range. This specific version is lightweight and portable enough to
take in the field, ideal for a medium format and SLR view cameras both digital
or traditional. Combined with a Manfrotto 3 way head it becomes one of the
most popular support for spotting scopes in the world.
Diameter legs in mm: 30, 25, 20.
Suggested Heads
GEARED HEADS
THREE-WAY HEADS
TWO-WAY HEADS
BALL HEADS
pag. 32
pag. 34
pag. 37
pag. 38
61cm
8cm
181cm
137cm
2.2kg
7kg
127/127VS
Lightweight, sturdy and portable, this basic tripod is one of the easiest of all
Manfrotto tripods to handle. This tripod has been designed for all 35mm and
medium format photographic cameras, digital or conventional type. Equipped
with a two way head can also be an ideal support for spotting scopes or
camcorders or digital video camcorders.
Diameter legs in mm: 30, 25, 20.
405, 410
808RC4
128LP, 128RC, 701RC2
468MG series, 488 series, 322RC2
photo 15
CHALLENGE TRIPODS
THE FASTEST TRIPOD
IN THE WORLD!
While designing the Neotec, our design team consciously
ignored how most tripods work, and thought instead
about how a tripod should work, from how easily and
quickly it should be set up to how effortlessly it should
close. At the heart of the Neotec lies an innovative
mechanism which, hidden safely inside the leg and
without any external levers or knobs, pushes outwards
on the tubing to lock the leg in place at any extension.
The mechanism exerts more locking power the heavier
the weight pushing down on it from above. The Neotec
offers stable and strong support that can take the strain
of constant use and safely bear the load of professional
camera equipment. We added new features like a built-in,
low-angle adapter and a convenient handle for more
comfortable carrying. We also incorporated the key
features that have made our professional tripods
so successful.
NEOTEC PRO PHOTO TRIPOD 458B
64cm
10cm
156cm
131cm
2.4kg
8kg
Awesomely fast and easy to use, the 458B has the innovative Neotec rapid opening and closing mechanism-just pull each leg downwards to open and automatically
lock it in any position, with no screws, knobs or levers to tighten or loosen. Then to fold it back up again, press the mechanism release button and push the leg closed.
Combined with the 458B’s high load capacity, great min-max height range and its full range of professional features, this makes it the ideal tripod for location work
under pressure. The 458B has a built in carrying handle; a two-section center column for low angle or normal shooting and four set leg angle positions. “Upside down”
leg construction also stops the worst of the mud you’re standing in from ending up inside the tripod.
PAT. PENDING
Suggested Heads
GEARED HEADS
THREE-WAY HEADS
TWO-WAY HEADS
BALL HEADS
16 photo
pag. 32
pag. 34
pag. 37
pag. 38
405, 410
808RC4
128LP, 128RC, 701RC2
468MG series, 488 series, 322RC2
CHALLENGE TRIPODS
Pull each leg downwards to open and automatically lock it in any position with
no screws, knobs or levers to tighten or loosen.
Press the mechanism release button and push the leg upwards. Release at
any intermediate point to lock the leg, or push it all the way up to close.
With its simple lines, uncluttered by protruding parts
that could get caught up in clothing or camera straps,
the 458B Neotec is not just a professional workhorse,
practical both during transportation and in use, it’s also
a sleek object of design in its own right, mixing the best
of Italian engineering with the best of Italian design.
www.manfrotto.com/neotec
photo 17
DISCOVER TRIPODS
DISCOVER
TRIPODS
The Manfrotto DISCOVER light weight tripod range
provides the best possible mix of performance and light
weight compactness for professional and semi-professional use. Our best-selling range, DISCOVER is also
home to our greatest innovations this year, with the introduction of a radically redesigned PRO top spider that
allows for easier than ever switching of the center
column between vertical and horizontal positions.
The choice between models in the DISCOVER will depend on the type of application the tripod will be used
for: photographers who are always “on the road” would
usually choose the very light MAGFIBER models (either
three-section for faster opening and greater rigidity or
four-section for more compact folded size).
The MAGFIBER tripods use carbon fiber leg tubes with a
special anti-torsion three-faceted profile, magnesium die
castings, quick lever leg locks and our classic vertical/
horizontal center column positioning system. The new
XPRO and XB are all-aluminum in construction, and
have been completely redesigned for better ergonomics
and control - features include an improved leg angle
lock/release system and a new, convenient vertical/horizontal column mechanism that means that, at last, you
don’t have to disassemble the head or the tripod center
column to switch between setups.
60cm
50cm
40cm
30cm
20cm
10cm
0cm
190MF3
18 photo
190MF4 190XPROB
190XB
DISCOVER TRIPODS
MAGFIBER TRIPOD 3 SECTION 190MF3
MAGFIBER TRIPOD 4 SECTION 190MF4
56cm
46cm
11cm
142cm
114.5cm
1.6kg
4kg
127/127VS
This tripod represents the top of the Manfrotto lightweight tripod range,
providing professional photographers a tripod that is very light, compact,
simple to use, yet high quality, strong and extremely versatile to position.
To reduce the weight of the tripod without any compromises on stability
and rigidity, the legs are made of unique, three-faceted carbon fiber tubes
of 1.2mm thickness combined with quick-action, magnesium and resin lever
locks. The top spider uses the patented design of the 190XPROB tripod,
which is able to achieve four angle leg settings and convert the center column
to a lateral arm. The center column used in this tripod comes from the latest
generation of aluminum and resin, which allows you to leave the head
mounted on the center column when switching between low angle and
normal shooting positions. All parts are assembled using a proven pressure
clamping technology that eliminates failure-prone glue joints for greater
durability and in-the-field serviceability. To make transportation easier,
the tripod is supplied with a padded carrying strap that can also operate
like a hook in order to hang weights from to increase the stability of the
tripod during shoots in extreme wind conditions. Ideal support for all
advanced and SLR analog/digital camera equipment and spotting scopes.
PATENTED
Suggested Heads
GEARED HEADS
THREE-WAY HEADS
TWO-WAY HEADS
BALLS HEADS
pag. 32
pag. 34
pag. 37
pag. 38
11cm
131cm
113.5cm
1.6kg
4kg
127/127VS
Same as the 190MF3 but more compact with four section legs. Ideal tripod
to fit in a backpack.
PATENTED
Dual positioning center column.
410
056, 460MG, 804RC2
128LP, 128RC, 390RC, 700RC2
222, 484, 484RC2, 486, 486RC2
photo 19
DISCOVER TRIPODS
Horizontal column feature allows the tripod to
reach extremely low positions. Center column
can be quickly and easily swung from vertical
to horizontal without any disassembly.
Eye-catching new design improves
ergonomics of the leg angle levers and the
horizontal column lock.
Built-in bubble spirit level makes camera
alignment quick and easy.
Leg angle presets allow the camera to reach
all intermediate heights from min-max
extension. Wider leg angles also increase
the tripod’s stability in bad weather conditions or on uneven terrain.
PRO TRIPOD 190XPROB
57cm
8,5cm
146cm
122cm
1,8kg
5kg
127/127VS
Newly redesigned, the 190XPROB makes the famous Manfrotto-patented horizontal center column feature even easier to use. Now, by extending the column to its
highest vertical position, it can be swung round to horizontal without removing the head or disassembling the column itself, so switching between framing and
positioning setups is more convenient than ever. The ergonomics of the leg angle release mechanism and the quick action leg locks themselves have also been greatly
improved.
Suggested Heads
GEARED HEADS
THREE-WAY HEADS
TWO-WAY HEADS
BALLS HEADS
20 photo
pag. 32
pag. 34
pag. 37
pag. 38
410
056, 460MG, 804RC2
128LP, 128RC, 390RC, 700RC2
222, 484, 484RC2, 486, 486RC2
DISCOVER TRIPODS
Quick action leg locks with
new improved design.
ALU TRIPOD 190XB
53,5cm
8cm
146cm
118,5cm
1,8kg
5kg
127/127VS
Built on the same ergonomically improved design as the 190XPROB but without the horizontal center column feature, the 190XB is lighter in weight and slightly more
compact.
Suggested Heads
GEARED HEADS
THREE-WAY HEADS
TWO-WAY HEADS
BALLS HEADS
pag. 32
pag. 34
pag. 37
pag. 38
410
056, 460MG, 804RC2
128LP, 128RC, 390RC, 700RC2
222, 484, 484RC2, 486, 486RC2
photo 21
ATTITUDE TRIPODS
ATTITUDE
TRIPODS
Our popular and successful DIGI range of all-in-one
tripods & heads for compact cameras now has
company- MODO is even more compact, even lighter
and much more beautifully designed. Learning from
our professional 322RC2 grip head, we put a
super-compact and ergonomic horizontal grip head
onto a lightweight set of full-featured quick-lever
lock legs to produce a hybrid photo/video tripod
ideal for family holidays as well as for more
demanding users with severe space limitations.
50cm
40cm
30cm
20cm
10cm
0cm
728B
22 photo
725B
718B
718SHB
715B
715SHB
785B
785SHB
ATTITUDE TRIPODS
DIGI TRIPOD WITH 3-WAY HEAD 728B
51.5cm
48.5cm 164.5cm
133cm
1.75kg
3.5kg
200PL
The 728B has a built-in smooth-moving 3 way head in cast aluminum suitable
for use with small video cameras as well as with photographic equipment.
The head has separate pan and tilt locks, a quick release camera plate
and with a short pan/tilt bar for more ergonomic use, particularly while
panning or tracking moving subjects. The leg pivot system uses a unique
single hinge design in aluminum which both keeps the cross section smaller
and allows the leg to fold shorter than conventional tripods.
Comes complete with a carrying bag with twin shoulder straps for backpack
style carrying.
Head movements: PAN 360° / TILT +90° -75° / LEVEL +90° -0°
DIGI TRIPOD WITH BALL HEAD 725B
50cm
47cm
164cm
132cm
1.41kg
3.5kg
The 725B iIncorporates a traditional quick release ball head with +90°/-90°
portrait orientation grooves and single repositionable “ratchet” locking lever.
It comes complete with a carrying bag with twin shoulder straps for
backpack style carrying.
Head movements: PAN 360° / TILT +90° -90°
photo 23
ATTITUDE TRIPODS
DIGI TRIPOD WITH 3-WAY HEAD 718SHB
40.5cm
39.6cm 123.2cm 104.6cm
1.2kg
2.5kg
785PL
The 718SHB is an extremely compact 4-section tripod with a short folded
length that will fit in your luggage with space left over. The 718SHB has a
built-in hybrid video/photo 3-Way head with a “dovetail” quick release camera
plate (can be locked in place one-handed), separate pan and tilt locks, and
a short pan/tilt bar for more ergonomic use while panning or tracking moving
subjects.
It comes complete with a carrying bag with twin shoulder straps for backpack
style carrying.
Head movements: PAN 360° / TILT +150° -80° / LEVEL +90° -0°
DIGI TRIPOD WITH 3-WAY HEAD 718B
49cm
47.6cm 166.3cm 139.5cm
1.4kg
2.5kg
785PL
Same as 718SHB, but with longer leg tubes for greater extended height.
709B
709BR
DIGI TABLE TRIPOD 709B
20cm
11cm
11cm
0.2kg
2kg
A tiny table-top tripod perfect for a number of applications. Fits in your pocket
or in its own belt-loop carrying pouch (available as an accessory) and sets up
in seconds to provide a stable shooting platform that can be used virtually
anywhere, indoors or out. The 709B comes complete with an integrated
Manfrotto Mini Ball Head providing 360° pan and ±90° tilt. Black finish.
SILVER BRIGHT DIGI TABLE TRIPOD 709BR
Same design, size and features as the 709B but in a stylish bright silver finish.
24 photo
ATTITUDE TRIPODS
DIGI MICRO TRIPOD WITH PERMANENT
FRICTION BALL HEAD 715SHB
DIGI MINI TRIPOD WITH PERMANENT
FRICTION BALL HEAD 715B
35cm
44cm
32.5cm 121.2cm 97.4cm
1kg
2.5kg
785PL
The most compact, full size tripod in the Manfrotto range - the 715SHB DIGI
MICRO is a four section tripod with an integral ball head with micro “dovetail”
quick release plate. The ball mechanism retracts into the main shoulder casting
for an even shorter folded length in transport. The leg pivot uses a unique
single hinge design in aluminum which both keeps the cross section
smaller and allows the leg to fold shorter than conventional tripods. The built-in
ball head allows you to adjust and set its friction so that it balances the weight
of your camera without needing locking and unlocking between positions.
All you have to do is point the camera and shoot. Adjustment is via a handle
found on the bottom of the column; set it for your camera and forget it!
If you prefer to lock the head for extra security, just turn the handle one more
time. Despite the reduced size, there’s been no compromise of stability.
Head movements: PAN 360° / TILT +90° -90°
PAT. PENDING
40.5cm
163cm
133cm
1.15kg
2.5kg
785PL
Same as 715SHB, but with longer leg tubes for greater extended height.
PAT. PENDING
TABLE TOP TRIPOD KIT 345
19cm
25cm
35.5cm
0.3kg
2kg
Small and portable, this table top tripod kit fits into any camera bag ready
to give quick support to a lightweight camera. Compromises: Mini Ball Head
482, Table Top Tripod 209, Extension 259B (Extension from 15.6cm to 25cm)
and Bag 345BAG (also sold as individual items).
photo 25
ATTITUDE TRIPODS
MODO,
THE TRIPOD YOU CAN TRUST,
MEMORIES GUARANTEED
Lightness, comfort, ease, versatility in only one tripod.
With the Modo you’ll never leave this tripod at home.
It’s extremely compact and lightweight to fit in any
bag. The rapid opening and closing allows the tripod
to be quickly set up providing an unlimited amount of
new occasions to use a tripod. Manfrotto introduces
Modo, the world’s first photo and video tripod designed
for everyday use. We’ve borrowed the professional
features from our best-selling tripods and incorporated
them into the Modo, to create an ultra-compact and
lightweight tripod that packs away into any bag or
backpack. Just like most digital cameras today which
feature video capturing, the new Modo ‘Hybrid’ Photo
& Video Head provides easy and comfortable
positioning of your camera to naturally shoot still or
motion images, and with the push of your thumb you can
instantly lock the camera for the perfect composition.
www.manfrotto.com/modo
26 photo
ATTITUDE TRIPODS
all-around
job
sport
enjoying
THE “ALL IN ONE” DIGITAL TRIPOD
The Modo offers you a new approach to photography and video by simply combining a photo head and a video head into one. The Modo Hybrid (Photo & Video)
Head easily switches between the two modes with the turn of a dial. In the photo
mode the head movement covers all positions to quickly shoot up, down, left,
right, vertically and horizontally. In the video mode the head becomes a traditional
video head with a pan-handle. The lock button is positioned in line with the hand
to easily compose, lock and shoot your images.
VIDEO
PH
TO
O
P
photo 27
ATTITUDE TRIPODS
MODO MAXI 785B
43.5cm
17.5cm 150.5cm
127cm
MODO MINI 785SHB
0.98kg
1kg
785PL
Modo Maxi offers the height you need, but folds up to a compact 43,5cm. The
785B is ideal for travelling, hiking, sports or even web photo/video applications.
36.5cm
15.5cm 114.5cm 96.5cm
0.87kg
1kg
785PL
Modo Mini is the perfect ‘take-along-anywhere’ tripod due to its ultra-compact
36,5 cm size, yet still stands tall at max height of 114cm), with column extended.
Convenient mobile phone
or MP3 pocket positioning.
Large ergonomic handle
to carry the bag by hand.
Two separate padded compartments
for the ultimate protection
of your tripod and camera gear.
Elastic mesh pockets for quick
and easy access to hold
accessories or a water bottle.
MODO BAG 785BAG
The 785BAG Modo Bag Backpack offers more than just stylish tripod protection - it is a camera bag and tripod case all in one. The Modo Bag has numerous
compartments to store your camera accessories, batteries, videotapes – even your wallet, passport, waterbottle and mobile phone. At the top is a special padded
compartment for your camera and of course, the main compartment holds the Modo. Additional padding lines the rear of the Modo Bag to protect your back from
the contents inside. Rounding out the 785BAG is a large, ergonomic handle to carry the bag by hand.
28 photo
ATTITUDE TRIPODS
FEATURES
1.
Hybrid joystick head for photo and video use-comfortable,
natural grip to easily position your camera.
5
2.
Ball Head-unlimited positioning to achieve any angle.
3.
6
Thumb lock button-to lock push down on the lever with your thumb,
release by pulling up with your index finger.
4.
Photo/Video selector button-when shooting stills, choose the
‘photo’ symbol and enjoy the freedom to move the head on any
axis. For video simply turn the dial to the ‘video’ symbol, and use
the grip bar as a pan-handle for tilt and pan movements.
4
2
3
5.
Small Dovetail Quick release plate-ultra compact quick release plate to match the same small size of your digital camera. For video
use, the plate comes equipped with an anti-twist alignment pin.
1
9
6.
Quick release plate button-With the quick push of this button you
can take your camera off the tripod. The button is specifically situated
to prevent accidental disengagement.
7
7.
3 leg angles + selector - Turn the dial to select normal leg
angles (25 deg), medium leg angles (45 degrees) or low-angle
(80 degrees) to achieve ground level shots.
8.
Column Lock-Hidden away between the tripod legs, but easy to find,
the lever quickly locks and unlocks the column to obtain higher
camera positioning or to remove the column for low angle positioning.
8
9.
2 section split column-the column unscrews and splits into 2 sections.
In combination with the low angle leg setting you can get your camera
all the way to the ground.
10
10.
Oval leg shape-a natural anti-rotation shape to ensure the legs don’t
turn. The elliptical shape also provide greater rigidity at the point
where the legs attach to the tripod.
11.
Quick flip leg locks-quick and easy to open and close the Modo.
12.
11
5-section telescopic legs-to allow the Modo to fold up to its
compact size, yet reach great heights when fully extended.
13.
Rubber feet-non-slip rubber feet offer protection on
delicate floors and surfaces while maintaining a
secure grip.
12
13
photo 29
HEADS
HOW
TO CHOOSE
THE RIGHT
HEAD
The head is the component that really gives you control over your camera so it’s worth choosing carefully.
Our range of photo heads comprises geared heads (a
Manfrotto invention designed primarily for studio use
and offering micro-precise framing, ultra-safe support
with greater load capacity); three-way heads (characterized by the fact that the movement on each axis is separately controlled by individual locks for more secure
support); ball heads (the fastest heads to adjust thanks
to their single lock/unlock mechanism which releases
the ball and socket joint to rotate on all axes); two-way
heads (a crossover from the video sector, popular with
users of long heavy lenses and sport optics and Vr heads (used to create single-row cylindrical or multi-row
spherical composite photographic images for immersive virtual environments or simply for panorama prints).
30 photo
Quick momement
Precise movement
FAST OR PRECISE?
The choice of a head is always an issue in view of the wide range
of products that we offer.
Using the parameters of speed and precision, the chart below
guides you among our four types of photographic heads.
Geared Heads
Three-way Heads
Ball Heads
Two-way Heads
VR Heads
WHICH CAMERA?
We have matched our head range with the different types of
cameras available in the photographic market to give you the
manufacturer’s point of view of which head would better support
your creativity.
Point and shoot analog digital camera
Advanced analog digital camera
Slr digital camera below 10 million pixels
Slr analogue or digital camera above 10 million pixels
Medium format camera
Large format camera
WHAT TYPE OF PHOTOS?
Some head designs offer great all-round performance, while
others are better-suited to respond to the needs of specific
subject matter and photographic styles. The following is a
quick guide to which head designs we recommend as
particularly suitable for common subject matters.
Macro
Portrait
Panorama landscape
Sport action
Night
Architectural
Cine
photo 31
HEADS
IF YOU SPECIALIZE IN ONE PARTICULAR TYPE OF PHOTOGRAPHY OR WANT VERSATILITY,
IF EXTREME SPEED OR EXTREME PRECISION IN CAMERA POSITIONING ARE VITAL,
CHOOSE YOUR HEAD FIRST:
GEARED HEADS
GEARED
HEADS
Manfrotto, the world’s leader in professional camera
supports, was the first company in its field to introduce
the three-way geared head mechanism. These heads
combine the speed of a ball head and the precision of
a three-way head. The result is a range of three models,
each one designed to support the three types of cameras available in the traditional and digital photographic
markets: small, medium and large formats. The 400
Geared Head, with its 10kg load capacity, can support
all large format cameras up to 20x25cm format. The
405, with a 7,5kg load capacity, has been developed to
work with all the medium format cameras up to 6x7cm,
equipped with digital or traditional backs. The smallest
of the range, the 410, is extremely compact and light
with its 5kg load capacity, and perfectly matches the
range of SLR cameras both analogue or digital available
in the market. All three models offer incredible speed,
stability and precision.
GEARED HEADS 400
16cm
2.6kg
10kg
Pan 360°
400PL-LOW
400PL-MED
400PL-HIG
Frontal Tilt
-90° +30°
Lateral Tilt
-7.5° +7.5°
This unique head offers precise geared movement in 3 directions. Fold away rotating handles for pan and tilt; and side to side leveling by a separated handle. In addition,
the tension holding the round quick release plate can be released to allow fine adjustment with complete safety. Designed to mount on either studio column stands
or larger tripods, this geared head for medium and large format cameras, provides the ultimate in fine adjustment and control to achieve the exact framing required.
Three 1/4” screws for camera attachment included.
32 photo
GEARED HEADS
PRO GEARED HEAD 405
16cm
1.6kg
7.5kg
410PL
Pan 360°
Frontal Tilt
-30° +90°
Lateral Tilt
-90° +30°
Speed and digital precision are paramount in the latest 405 Pro Digital Geared Head, the 405 provides ideal support and fast, pinpoint positioning for professional
medium format cameras with conventional or digital backs. The 405 Pro Digital Geared Head was designed specifically to meet the more exacting, time-sensitive
needs of busy professional digital photographers who shoot with medium format or 35mm camera/back with payloads up to 7.5kg. It utilizes large, easy-to-grip knobs
that provide smooth, positive, geared control through 360° pan and +90° -30° frontal and lateral tilt. In addition to its 3-D geared functions, the 405 also incorporates a
unique feature that allows you to instantly disengage the gears and rough position the camera by hand, then instantly reengage them for ultra-precise final alignment.
Camera attachment: 1/4” + 3/8” screw.
PATENTED
JUNIOR GEARED HEAD 410
13cm
1.22kg
5kg
410PL
Pan 360°
Frontal Tilt
-30° +90°
Lateral Tilt
-90° +30°
Extremely compact, this unique head offers gear movement in three directions, pan, tilt and side to side tilt.
The head incorporates a quick release camera plate system and is suitable for 35mm SLR and medium format cameras.
Camera attachment: 1/4” + 3/8” screw.
PATENTED
photo 33
THREE-WAY HEADS
THREE-WAY
HEADS
A tripod head is just as important as a tripod. It is
important to match the task of the tripod, head and
camera. For this reason, Manfrotto offers a wide range
of heads able to carry loads up to 12kg for use with point
and shoot cameras up to heavy large format cameras.
The Manfrotto range of Three Way Heads are precision
engineered to provide smooth and independent control of
pan, back and forward tilt plus side to side tilt movements.
In fact, the camera position can rapidly change from
landscape (horizontal) to portrait (vertical) or adjusted
to the appropriate angle that best suits the shot.
Large rubber grips on the pan and tilt handles provide
efficient control and the range includes models with
quick release camera plate systems which enable
cameras to be interchangeable quickly or to go from
tripod to hand held and back rapidly.
STANDARD 3-WAY HEAD WITH QUICK RELEASE PLATE 808RC4
15.6cm
1.42kg
8kg
410PL
Pan 360°
Tilt -30°+90° Tilt -90°+30°
The 808RC4 streamlines our range of 3-way heads by incorporating new elements while maintaining all the features you loved. There are two balance springs in the
vertical tilt (forward/backward) and horizontal tilt (left/right) movements. These springs enable you to more comfortably handle heavier camera loads (such as very long
lenses) with minimal effort. Both springs can be turned off in case normal head operation is required. The head is comprised of aluminum and designed in a manner
to support up to 8kg yet lightweight and small enough to pack in any camera kit. The standard quick release system is used to accommodate larger camera platforms
and incorporates dual axis bubble levels to achieve level shots.
3D PRO HEAD 229
16cm
1.9kg
12kg
030-14
Pan 360°
Tilt -25° +90° Tilt -90° +30°
Finely machined for greater positioning with smooth, certain action. Three built-in spirit levels for horizontal and vertical control.
The head has a quick release camera plate with secondary safety catch for added security. Camera attachment: 1/4” + 3/8” screw.
Optional Plates: 030-38, 030ARCH-14, 030ARCH-38, 030HAS, 030L, 130-14, 130-38.
34 photo
THREE-WAY HEADS
HEAVY-DUTY HEAD 160
14cm
2kg
10kg
030L
Pan 360°
Tilt -20° +90° Tilt -90° +30°
Ideal for large format cameras. Supplied with quick release camera plate. Over-sized locking controls and heavy-duty construction provide an extra measure of security.
Side movements allows full vertical positioning for fixed-back cameras. The head has a quick release camera plate with secondary safety catch for added security.
Camera attachment: 1/4” + 3/8” screw.
Optional Plates: 030-38, 030ARCH-14, 030ARCH-38, 030HAS, 030L, 130-14, 130-38.
BASIC PAN TILT HEAD WITH QUICK RELEASE PLATE 804RC2
12cm
0.79kg
4kg
200PL
Pan 360°
Tilt -30° +90° Tilt -90° +30°
3-way photo head constructed of ultra-durable and lightweight technical polymer, the 804RC2 easily withstands the daily rigors of the professional photographer.
A unique spring feature has been added to the 804RC2 to assist in the tilt motion of the head to compensate for heavier, off-center loads. Ergonomic and newly designed
handles fit comfortably in the hands, while the standard quick release plate fits snugly in the low-profile receiver.
Optional Plates: 200PL-38, 200PLARCH-14, 200PLARCH-38.
photo 35
THREE-WAY HEADS
3D MAGNESIUM HEAD 460MG
10.5cm
0.43kg
3kg
200PL-14
Pan 360°
Tilt -30°+90° Tilt -180°+30°
An innovative 3D Head unlike any other! Cast from lightweight magnesium, the head can be positioned in virtually any position to get the exact framing of the image.
The lock-system using spring-loaded conical joints allows greater flexibility than any other 3D head whether mounted on a tripod center column or lateral arm. The
rubber grip knobs provide finger tip control and won’t poke you in the eye like conventional handles do. The 460Mg is the ideal head in combination with the Carbon
Number One line for 35mm SLRs and medium format cameras.
Camera attachment: 1/4”
Optional Plates: 200PL-38, 200PLARCH-14, 200PLARCH-38.
3D JUNIOR HEAD 056
10cm
0.5kg
3kg
Pan 360°
Tilt -30°+180° Tilt -180°+30°
A self-adjusting conical bearing locking system allows 360° rotation on both the vertical and horizontal plane.
This is the ideal head for 35mm and light to medium format work.
Camera attachment: 1/4”
Optional Plates: 323, 394.
36 photo
TWO-WAY
HEADS
Alongside the photographic heads is an equaly broad
sweep of heads designed for video work. This section
presents only a few of the available models that,
although created with the needs of video cameramen
in mind, can also support still cameras with medium/
long tele lenses or scopes and binoculars.
JUNIOR HEAD BLACK 390RC2
10cm
0.7kg
5kg
200PL-14
Pan 360°
Frontal Tilt
-75°+90°
Lateral Tilt
-90°+90°
This 3-way aluminum head is designed to allow still photography or video
application. It is equipped with a quick-release 200PL camera plate system
and Teflon pads to ensure smooth pan and tilt movements with independent
locks. The pan-locking bar is padded with soft non-slip rubber.
Optional Plates: 200PL-38.
MICRO VIDEO HEAD 128LP
11cm
1kg
4kg
Pan 360°
MICRO VIDEO HEAD BLACK 128RC
Tilt -90°+90°
11.5cm
1kg
4kg
200PL-14
Pan 360°
Tilt -60°+90°
The micro video head is perfect for lightweight video cameras, and includes
an adjustable pan bar. It has smooth fluid movement, pan and tilt locks. The
adjustable pan bar can be positioned either on the left or right side.
Optional Plate Adapter: 323, 394, 577.
A lightweight fluid head with adjustable pan bar and quick release camera
plate with secondary security, ideal for cameras up to 4kg in weight. It has
smooth fluid movement, pan and tilt locks.
Optional Plates: 200PL-38.
MINI VIDEO HEAD BLACK 700RC2
VIDEO HEAD 701RC2
9.6cm
0.52kg
2.5kg
200PL-14
Pan 360°
Tilt -75°+90°
A compact and lightweight 2-movement video head designed principally to
support the latest digital video equipment but also suited to still photography
cameras with medium and long tele lenses. The 700RC2 has a fixed length
pan bar with soft handle and separate locking mechanisms for the 360° pan
and the +90°/-75° tilt. Smooth and constant movements on both axes are
assured by a fixed system of fluid cartridges.
Equipped with quick release 200PL-14 video plate system with VHS PIN and
a secondary safety catch. Head to tripod attachment is 3/8” female.
Optional Plates: 200PL-38.
10.1cm
0.8kg
4kg
200PL-14 Pan 360°
Tilt -60°+90°
Small and lightweight, this fluid video head is capable of accommodating
a payload of up to 4kg, and is ideal for set-ups such as a fully equipped
3 CCD mini DV camcorder or a spotting scope combined with a digital still
or video camera for digiscoping purposes. It is equipped with a fixed 1.5kg
counterbalance spring which combined with a camera plate attachment
made of a touch and go/sliding plate which can shift from +15mm to
-15mm from the 0 point to optimize the position of the counterbalance
spring and deliver a wide range of balancing positions.
Optional Plates: 200PL-38.
photo 37
THE 468MG IS THE
FIRST BALL HEAD IN
THE WORLD TO
INCORPORATE A
HYDRAULIC SYSTEM
TO LOCK THE BALL
MECHANISM
IN PLACE.
38 photo
BALL HEADS
HYDROSTATIC
BALL HEADS
The Hydrostat is the most advanced ball head of the
entire Manfrotto range. Designed to meet the demand
of professional photographers for a lightweight, but at
the same time heavy duty load capacity ball head. This
model has similar features to our standard range of ball
and socket heads, like independent pan and tilt locks,
360° pan and +90° / -90° tilt movement - but employs a
revolutionary friction and locking mechanism. Designed
for camera and lens loads of up to 16kilos, this head
has a magnesium die cast body, a 2” Teflon coated
aluminum ball which combined with specially designed
tension surfaces provides movement as smooth as silk.
A calibrated adjustable tension control allows you to
preset the ball tension to suit your camera weight and
give you fingertip control. The oversized lock knob hides
a “PAT PENDING” locking mechanism which uses the
fundamental criteria of the hydraulic laws - specifically
referring to the hydrostatic ones, which locks the
camera in such a secure position it gives the impression
it has become one solid part of the head and removing
completely any movement during the locking phase.
Completing this masterpiece, a graduated panoramic
base and a choice of six different “Hydrostat Ball Head”
versions featuring a variety of quick release plate fixings.
468MG
468MGRC0
468MGRC2
HYDROSTATIC BALL HEAD 468MG
13cm
0.65kg
16kg
Pan 360°
Tilt +90°-90°
468MGRC3
468MGRC4
468MGRC5
HYDROSTATIC BALL HEAD WITH RC0
RAPID CONNECT SYSTEM 468MGRC0
13.5cm
0.84kg
16kg
030-14
Pan 360°
Tilt +90°-90°
HYDROSTATIC BALL HEAD WITH RC2
RAPID CONNECT SYSTEM 468MGRC2
HYDROSTATIC BALL HEAD WITH RC3
RAPID CONNECT SYSTEM 468MGRC3
12cm
12cm
0.65kg
10kg
200PL-14
Pan 360°
Tilt +90°-90°
0.8kg
16kg
357PLV
Pan 360°
Tilt +90°-90°
HYDROSTATIC BALL HEAD WITH RC4
RAPID CONNECT SYSTEM 468MGRC4
HYDROSTATIC BALL HEAD WITH RC5
RAPID CONNECT SYSTEM 468MGRC5
12cm
12cm
0.73kg
16kg
410PL
Pan 360°
Tilt +90°-90°
0.74kg
12kg
501PL
Pan 360°
Tilt +90°-90°
photo 39
BALL HEADS
HORIZONTAL GRIP ACTION BALL HEAD 322RC2
10.3cm
0.7kg
5kg
200PL-14
Pan 360°
Tilt -90°+90° Tilt -3°+90°
Take the versatility of a ball head, add true ergonomic control and you get the 322RC2: a photographic head that allows you to unblock, move, position and lock your
camera with one hand in one position thanks to the revolutionary design of its grip handle, which incorporates the ball lock lever and can also mount the 322RS shutter
release accessory. A friction control wheel lets you regulate the power of the blocking mechanism to match the weight of your camera/lens. The 322RC2 is made from
magnesium for lightweight performance, and is designed to keep the weight of your kit as close as possible to the tripod’s center of gravity by way of its reduced height.
It is this fact, matched with the precision construction of the 322RC2 that gives the head its load capacity of 5kg. Complete with built-in bubble spirit level and quick
release camera plate (standard 1/4” screw, with secondary safety pin). Suitable for use with 35mm or medium format cameras.
Optional Plates: 200PL-38, 200PLARCH-14, 200PLARCH-38
PAT. PENDING
Center OF GRAVITY
In turn, aligning the camera close to the tripod center of gravity gives the
322RC2 an extraordinary 5kg load capacity.
Lateral tilt movement: -3°/+90°.
ERGONOMICS
Whether you’re left handed or right, whether you prefer a horizontal grip or
vertical, the 322RC2 is practical and ergonomic. Customise the location of the
camera plate to suit your ideal working position.
ADDITIONAL CAMERA PLATE ADAPTER FOR 322RC2 - 322RA
Camera plate adapter assembly for the 322RC2 can also be available as a separate accessory in case you want the camera to be as close as possible to the tripod’s
center of gravity, which provides a higher rate of stability.
40 photo
BALL HEADS
BACK VIEW
Double action switch 2.5mm stereo jack
ELECTRONIC SHUTTER RELEASE
KIT FOR 322RS
CABLE SHUTTER RELEASE
KIT 322RSM
The remote control electronic shutter release kit fits the 322RC2 grip action
ball head and puts control of your camera’s shutter down on the head itself,
so you can take photos the moment you’re in position, without having to move
your hand from the head grip up to the camera body. The 322RS can be fitted
to the head no matter which position you choose to use it in, for both right and
left handed photographers.
PAT. PENDING
The cable shutter release kit fits the 322RC2 Grip Action Ball Head and puts
control of your camera’s shutter down on the head itself, so you can take
photos the moment you’re in position, without having to move your hand from
the head grip up to the camera body. The 322RS can be fitted to the head no
matter which position you choose to use it in, for both right and left handed
photographers.
322RS fitted for left-handed use of the
322RC2 head in horizontal position.
Code
322RS fitted for left-handed use of
the 322RC2 head in vertical position.
322RS fitted for right-handed use of
the 322RC2 head in vertical position.
322RS fitted for right-handed use
of the 322RC2 head in horizontal
position.
Description
U5463
Bronica SQAI
U5453
Bronica SQAM, ETR md
U5453
Canon
U5FW41
Canon Elan 2, 2E, 7, 7E Rebel 200, XI Lite
522SCA
Canon EOS 300D, DIGITAL REBEL
U5FW46
Canon EOS 1, A2, A2E, AS, 1N, 620, T90
U5FW43
Canon EOS 1V, 3, D2000, D30
U5466
Canon EOS 1V, 3, D30, D60, 10D, 1D, 1D Mark II, 1Ds
U5459
Canon EOS A5, A2E, A2, 1, 1N, 620, T90
U5FW41
Contax 645, A1, N1
U5465
Hasselblad 503CW/CXi
U5452
Hasselblad ELM, ELX
U5456
Leica
U5467
Mamiya 645AF
U5FW45
Mamiya 645AF
U5454
Mamiya RZ67, RZ67 II, 645 Super, 645 Pro
U5458
Minolta 5000/I, 7000/I, 8000/I, 9000/I, 5Xi, 7Xi, 9Xi, 700si
U5FW42
Minolta 7 & 9
U5FW44
Nikon D1, D1x, N90/s, F5, F90x, F100
U5451
Nikon MD2/4/12/15, 8008/s, F4S
U5453
Olympus
U522SCA
Pentax *ist
U5FW47
Pentax 645N & all Pentax Autofocus SLR cameras except Z-1P
photo 41
BALL HEADS
482
484
484RC2
486
486RC2
488
488RC0
MICRO BALL HEAD 482
5.8cm
0.09kg
2kg
Pan 360°
Tilt +90°-90°
All-purpose ball head designed for use with compact, 35mm and small digital cameras. This head is ideal for the Table Top Tripod 209, car window clamp 243 and
monopods such as the 676B. It has a single indexed “ratchet” locking knob for 360pan ° and +90° -90° tilt movements. Camera attachment is via a 50mm platform
with 1/4” male thread. Head to tripod attachment is 1/4” and 3/8” female. All aluminum construction and black finish.
MINI BALL HEAD 484
7.5cm
0.25kg
4kg
Pan 360°
Tilt +90°-90°
Designed for use with compact, 35mm and small digital cameras. The strong die-cast construction, precision-machined aluminum housing and extremely hard
phenolic resin ball provide excellent smooth movements across all tilt positions. A single “ratchet” control lever securely locks both the +90°-90° ball and the 360° pan
movements. Camera attachment is via a 50mm platform with 1/4” male thread. Head to tripod attachment is 3/8” female.
MINI BALL HEAD WITH RC2 RAPID CONNECT SYSTEM 484RC2
9.5cm
0.32kg
4kg
200PL-14
Pan 360°
Tilt +90°-90°
This versatile head is fitted with a quick release 200PL camera plate system with a secondary safety catch. The head is perfect for 35mm SLR cameras with medium
lenses, and light medium format cameras. Head to tripod attachment is 3/8” female. Optional Plates: 200PL-38, 200PLARCH-14, 200PLARCH-38
COMPACT BALL HEAD 486
9.2cm
0.38kg
6kg
Pan 360°
Tilt +90°-90°
The Compact Ball Head is strong enough to take 35mm SLR cameras with medium lenses, and light medium format cameras. It has a single indexed “ratchet” locking
knob for 360° pan and +90° -90° tilt movements. Camera attachment is via a 50mm platform with 1/4” male thread. Head to tripod attachment is 3/8” female.
All aluminum construction and black finish.
COMPACT BALL HEAD WITH RC2 RAPID CONNECT SYSTEM 486RC2
10cm
0.46kg
6kg
200PL-14
Pan 360°
Tilt +90°-90°
Same as the 486 but equipped with a quick release 200PL camera plate system with a secondary safety catch. Camera plate has 1/4” male thread. Head to tripod
attachment is 3/8” female. Optional Plates: 200PL-38, 200PLARCH-14, 200PLARCH-38
MIDI BALL HEAD 488
11.2cm
0.56kg
8kg
Pan 360°
Tilt +90°-90°
With its solid aluminum construction and phenolic resin ball, this head is the ideal support for all traditional or digital small or medium format cameras. It features
separate fast action “ratchet” locks on 360° pan and +90 -90° tilt movements. You can position your camera anywhere in 180° sphere with confidence and ease.
Camera attachment is via a 50mm platform with 1/4” male thread. Head to tripod attachment is 3/8” female.
MIDI BALL HEAD WITH RCO RAPID CONNECT SYSTEM 488RC0
13.4cm
0.83kg
8kg
030-14
Pan 360°
Tilt +90°-90°
Same as the 488 but equipped with a quick release 030 camera plate system with a secondary safety catch and two spirit levels for precise leveling on both vertical or
horizontal axes. Camera attachment has 1/4” male thread. Head to tripod attachment is 3/8” female.
Optional Plates: 030ARCH-14, 030ARCH-38, 030HAS,130-14, 130-38, 030L.
42 photo
BALL HEADS
488RC2
488RC4
490
490RC4
222
MIDI BALL HEAD WITH RC2 RAPID CONNECT SYSTEM 488RC2
10.8cm
0.67kg
8kg
200PL-14
Pan 360°
Tilt +90°-90°
Same as the 488 but equipped with a quick release 200PL camera plate system with a secondary safety catch. Camera plate has 1/4” male thread. Head to tripod
attachment is 3/8” female.
Optional Plates: 200PL-38, 200PLARCH-14, 200PLARCH-38
MIDI BALL HEAD WITH RC4 RAPID CONNECT SYSTEM 488RC4
11.5cm
0.8kg
8kg
410PL
Pan 360°
Tilt +90°-90°
Same as the 488 but equipped with a quick release 410PL camera plate system with a secondary safety catch and two spirit levels for precise leveling on both vertical
or horizontal axes. Camera plate has 1/4” male thread. Head to tripod attachment is 3/8” female.
MAXI BALL HEAD 490
14cm
1.05kg
12kg
Pan 360°
Tilt +90°-90°
The top of Manfrotto’s range of center ball heads in die-cast aluminum with precision phenol resin ball. The 490’s features make it versatile and ideal for digital and
traditional photographic equipment from 35mm to 20x25cm format up to 12kg in weight. It features separate locks on 360° pan and +90 -90° tilt movements, with an
additional friction control on the ball movement to give just the right resistance and smoothness with minimum effort, even with varying weight of equipment on board.
The Maxi Ball Head attaches to the camera via a 50mm platform with an ingeniously combined 1/4” and 3/8” male thread. Head to tripod attachment is 3/8” female.
MAXI BALL HEAD WITH RC4 RAPID CONNECT SYSTEM 490RC4
13.7cm
1.12kg
12kg
410PL
Pan 360°
Tilt +90°-90°
Same as the 490 but equipped with a quick release 410PL camera plate system with a secondary safety catch and two spirit levels for precise leveling on both vertical
or horizontal axes. Camera plate has 1/4” male thread. Head to tripod attachment is 3/8” female.
GRIP ACTION BALL HEAD BLACK 222
21cm
0.78kg
2.5kg
200PL-14
Pan 360°
Tilt +90°-90°
Versatile, quick and easy to use. Just grip the handle and you can position your camera anywhere within a 180° sphere. Supplied with quick release camera plate with
secondary safety lock, built-in bubble level and tension adjustment. Made of cast aluminum. Ideal for 35mm cameras with short or medium focal length lenses.
Camera attachment: 1/4”
Optional Plates: 200PL-38, 200PLARCH-14, 200PLARCH-38
PATENTED
photo 43
VR HEADS
PANORAMIC, CUBIC &
SPHERICAL VR
PHOTOGRAPHY:
IT’S TIME TO BROADEN
YOUR HORIZONS!
Since the inception of photography over 150 years ago,
photographers have continuously sought better ways
to bring realism and a sense of intimacy to their viewers.
While panoramic photography has been with us for almost
80 years, recent imaging technologies and software have
taken the panorama to yet another level, allowing capture
of complete 360° x 360° cubic and spherical views of the
scenes we photograph, along with the ability to display
them in powerfully immerse environments. Cubic and
spherical panoramas expand upon the traditional flat or
cylindrical panorama. They allow for documentation of
the complete environment around you and provide a way
to virtually immerse your audience into your vision. They
even offer a new means of artistic expression. Natural
spaces and architectural projects can be accurately and
interactively visualized by audiences who may never
actually visit these locations in person. Virtual reality (VR)
panoramas and object movies provide superior means
to entertain, educate and inform, as well as to market
and sell commercial products. Manfrotto’s 303SPH
head allows photography of multi-row cubic, spherical
and cylindrical panoramas, along with VR object movie
sequences. It is the latest addition to Manfrotto’s celebrated family of pan heads, tripods and camera supports
that will change the way you photograph your world.
www.manfrotto.com/303SPH
44 photo
VR HEADS
OBJECT PANORAMA
Use the 300N base as a turntable to spin a 3D object through sequential constant angle movements in front of your camera until a 360° cycle has been completed.
Superimpose the images in the correct order using your chosen software to allow viewers to see the object from all angles.
SPHERICAL PANORAMA
Use the 303, 303PLUS or 303SPH head plus a 185° fisheye lens. Take two photos at 180° to each other, then stitch them together to create a 360°x360° spherical
panorama.
CYLINDRICAL PANORAMA
Use the 303, 303PLUS or 303SPH head to spin your camera around its nodal point through a longitudinal sequence of constant angle shots on the same level which
can be stitched together (basically... placed edge to edge) using your chosen software to create a single row “cylindrical” panorama.
MULTI-ROW / CUBIC PANORAMA
Use the 303SPH to spin your camera around its nodal point through both latitudinal and longitudinal sequences of constant angle shots which can then be stitched
together and composite to create a multi-row “cubic” 360°x360° panorama.
photo 45
VR HEADS
APPLICATION
“Multi-Row” cubic Panorama
MULTI ROW PAN HEAD 303SPH
32cm
2kg
4kg
357PLV
The 303SPH is a multi-row panoramic photography head. It has sliding plates
to locate the camera over the panoramic axis of rotation, plus a sliding
plate which rotates around the front/back tilt axis. This allows the camera
to be rotated on both horizontal and vertical axes around the camera/lens
nodal point, so multi-row panoramic photo sequences (cubic VR photos)
can be taken accurately and easily. Using the 303SPH ensures that software
used for photo stitching produces a precisely composed VR environment
with minimum post-production intervention or software correction. All plates
and rotation index guides on the 303SPH have clear markings to allow
easy repositioning of the camera once nodal point position has been identified
and noted down. The 303SPH’s vertical bracket can be unlocked and
rotated through 90° (then re-locked) so that the head takes up less space
in transport, and so that the sliding plate mechanisms are protected against
knocks and bumps. The 303SPH comes complete with an extra set of
sliding plates for use with cameras of different sizes.
303SPH Features:
• Three sliding plates for precise nodal point positioning on all planes/axes.
• Short plates included for more convenient use with compact cameras.
• Long plates included for use with larger SLR or medium format cameras.
• Camera attachment via 1/4” and 3/8” male screw.
• 3/8” female tripod fitting.
• Dual graduated scale to set the angle of rotation to any of the following:
90°, 60°, 45°, 36°, 30°, 24°, 20°, 15°, 10°, 5°
(respectively equivalent to 4, 6, 8, 10, 12, 15, 18, 24, 36 or 72 photos
to achieve a full 360° rotation) on upper part of 300N rotation unit.
• Graduated scale from 0° to 360° on lower part of 300N rotation unit.
• By removing vertical brackets, the 303SPH can also be used as an object turntable.
• Vertical bracket folds down and removes for compact size during transport.
46 photo
UPGRADE KIT: CONVERTS 302
INTO 303SPH HEAD 303SPHUK
The 303SPHUK upgrade kit is essentially a 303SPH head without the 300N
PAN ROTATION UNIT or the plate attachment that locks onto the 300N; by
using these components from the old model 302 head, photographers can use
their existing pan head as a basis to build a 303SPH-like product. Remember
however that the 300N rotation unit has been improved compared to that
supplied with the original 302 family.
VR HEADS
APPLICATION
Precision cylindric Panorama
PRECISION PAN HEAD 303PLUS
31.3cm
2.2kg
5kg
The 303PLUS advanced panoramic photography head is built around the 300N pan rotation unit, with sliding plates for nodal point positioning and an elbow bracket to
allow the camera to be mounted in either portrait or landscape orientation. It incorporates precise geared movements of the two sliding plates used to locate the camera
over the panoramic axis of rotation, adding greater accuracy to nodal point positioning. The micro-positioning plates provide extremely precise fingertip adjustment via a
gear drive system; a release button disengages the gear drive to facilitate rapid movement of the plates when required. The plates are also longer than those of the 303 head,
which helps to make this head suitable for use with larger traditional or digital SLR cameras equipped with standard or wide angle lenses, or for medium format cameras.
303PLUS Features:
• Double micro positioning sliding plates - 180mm long with 120mm of adjustment
for precise nodal point positioning.
• Convenient quick release elbow bracket with 1/4” and 3/8” male screw for camera
attachment.
• 3/8” female tripod fitting.
• Dual graduated scale to set the angle of rotation to any of the following: 90°, 60°, 45°,
36°, 30°, 24°, 20°, 15°, 10°, 5° (respectively equivalent to 4, 6, 8, 10, 12, 15, 18, 24, 36
or 72 photos to achieve a full 360° rotation) on upper part of 300N rotation unit.
• Graduated scale from 0° to 360° on lower part of 300N rotation unit.
• By removing vertical brackets, the 303PLUS can also be used as an object turntable.
photo 47
VR HEADS
APPLICATION
Cylindric Panorama
PAN HEAD 303
31.3cm
1.65kg
5kg
The 303 pan head permits the photographer to take sequential constant-angle shots around a single axis with his or her camera either in portrait or landscape position,
and with the nodal point of the camera/lens in line with the center of panoramic rotation to ensure that parallax effects do not cause problems during image stitching.
It is built around (and includes) the 300N panoramic unit, adding a system of sliding horizontal and vertical plates for accurate positioning of the camera nodal
point. The plates have engraved index rules to make subsequent repositioning easier. The included quick release elbow bracket lets the photographer use
the portrait orientation of the camera gaining vertical field. The system is suitable for most 35mm SLR still and digital stills cameras using wide-angle or
standard lenses.
303 Features:
• Double sliding plate with 80mm of adjustment for precise nodal point positioning.
• Convenient quick release elbow bracket with 1/4” and 3/8” male screw for camera
attachment.
• 3/8” female tripod fitting.
• Dual graduated scale to set the angle of rotation to any of the following: 90°, 60°, 45°,
36°, 30°, 24°, 20°, 15°, 10°, 5° (respectively equivalent to 4, 6, 8, 10, 12, 15, 18, 24, 36
or 72 photos to achieve a full 360° rotation) on upper part of 300N rotation unit.
• Graduated scale from 0° to 360° on lower part of 300N rotation unit.
• By removing vertical brackets, the 303 can also be used as an object turntable.
48 photo
APPLICATION
Cylindric Panorama
Object Panorama base
VR HEADS
APPLICATION
PAN ROTATION UNIT 300N
6.3cm
0.52kg
14kg
The 300N panoramic rotation unit allows the photographer to take sequential constant-angle shots around a single axis, an essential part of achieving accurate and
easy-to-stitch panoramic compositions. The set positions of the 300N give ample choice of rotation angle and so of number of photos needed to complete a 360° pan
and cover the most common requests of panoramic photographers depending on the camera/lens equipment used.
To make angle selection easier, a “click-stop” selector screw is included and attached to a safety cable to prevent it from being separated from the head and getting
lost. The 300N also comes complete with a secondary locking screw which stops unwanted or accidental rotation of the head when heavy or off-center equipment
makes it less balanced or when the head is used for non-horizontal rotation.
The 300N can also be used as a turntable base for object panoramas, or as a means of reading the angle of rotation of camera pan movements in a range of photography. A camera can be mounted on the panoramic unit by adding one of a range of quick release, sliding or fixed plates or a conventional geared, ball or 3-way head.
300N Features:
• Upper dual graduated scale to set the angle of rotation to any of the following: 90°, 60°, 45°, 36°, 30°, 24°, 20°, 15°, 10°, 5°
(respectively equivalent to 4, 6, 8, 10, 12, 15, 18, 24, 36 or 72 photos to achieve a full 360° rotation based on 35mm film frames or 24x36mm CCD).
• Lower graduated scale from 0° to 360°.
• 3/8” female tripod fitting; 3/8” male screw head or plate fitting.
HOT SHOE TWO AXIS BUBBLE LEVEL 337
BASIC PANORAMIC HEAD ADAPTER 627
The 337 is a double axis spirit level that mounts to the hot shoe of any standard
35mm SLR camera to help you achieve a finer degree of accuracy and
consistency in panoramic photo sequences.
Basic panoramic adapter that can be mounted on top of a head, monopod, or
tripod. The adapter camera platform has a graduated scale in millimeters to
set the camera position during different shooting sequences and a dual 1/4”
and 3/8” camera fixing screw. This accessory can be connected to a head,
monopod, or tripod by a 3/8” female attachment.
LEVELING BASE 338
BALL CAMERA LEVELER 438
4cm
5cm
0.53kg
15kg
The 338 is fitted between tripod and head and is used in combination with
tripods that don’t have built-in leveling mechanisms. Its three adjustment
dials enable the operator to make fine, finger tip adjustments up to +/- 5
degrees to ensure the camera is perfectly level. The dials also have locking
rings to ensure stability once the right position is reached.
A spirit level is built in for reference. The base has a 3/8” female tripod
fitting and a 3/8” male head fitting.
0.65kg
15kg
The 438 is fitted between tripod and head and provides easy, fast leveling
for tripods without built-in leveling mechanisms. Its range of movement is 10°.
photo 49
MONOPODS
MONO MODO 790B
MONOPODS
39cm
145.5cm
0.29kg
1kg
Modo Mono provides you the support when you can’t use a tripod. Simply
attach your camera directly to the top platform and begin shooting.
DIGI MONOPOD 676B
48cm
154cm
0.4kg
4.5kg
What’s even more compact, even lighter, even quicker to set up than a DIGI
tripod? A DIGI monopod! When you don’t need the total “hands-free” support
of a tripod, a monopod is a convenient shoulder to lean on. Four section,
lightweight monopod with rapid action extension locks for compact spotting
scopes. 1/4-20” fixing screw.
The monopod is an important part of every photographer’s
support equipment. Besides the tripod, the monopod is the
best way to hold a camera in situations where space is
limited, the quantity and weight of the equipment carried on
location needs to be kept to a minimum, or set-up speed is
needed. Correctly handled, the monopod supplies all the
camera support you are likely to need even for long lenses.
Just look at the press and sports photographers - they
would not bother with them if they did not get results!
MAGFIBER MONOPOD 5 SECTION 695
MAGFIBER MONOPOD 4 SECTION 694
46cm
53cm
160cm
0.59kg
5kg
Five section, lightweight carbon fiber and magnesium locking collars monopod.
Extremely compact with a minimum length for transportation of 46cm. And
four leg extensions allowing the monopod to be rapidly extended to a maximum
height of 160cm. The Monopod is equipped with rapid action extension locks, a
wrist strap and a camera platform with dual 1/4” and 3/8” camera fixing screw.
165cm
0.58kg
5kg
Four section, lightweight carbon fiber and magnesium locking collars
monopod. Ideal for sporting events, allowing the photographer to shoot over
the heads of everyone. The Monopod has rapid action extension locks, a wrist
strap and a camera platform with dual 1/4” and 3/8” camera fixing screw.
MONOPOD 679B
COMPACT MONOPOD 680B
48cm
51cm
154cm
0.83kg
10kg
Four section Monopod featuring sure rubber grip, wrist carrying strap, quick
action lever leg lock system with 45° run, large 60 mm camera/head platform
with plastic cover and dual 1/4” - 3/8” camera fixing screw.
154cm
0.4kg
4.5kg
Three section Monopod featuring sure rubber grip, wrist carrying strap, quick
action lever leg lock system with 45° run, large 60 mm camera/head platform
with plastic cover and dual 1/4” - 3/8” camera fixing screw.
PROFESSIONAL MONOPOD 681B
SELF-STANDING PRO MONOPOD 682B
67cm
74cm
172cm
1.1kg
12kg
All the features of the professional Monopod 681B with a handy addition of
three retractable legs. Dual 1/4” - 3/8” coaxial camera fixing screw.
161cm
0.78kg
12kg
Robust three section Monopod featuring sure rubber grip, wrist carrying strap,
quick action lever leg lock system with 45° run, large 60mm camera/head
platform with plastic cover and dual 1/4” - 3/8” camera fixing screw.
NEOTEC PRO PHOTO MONOPOD 685B
AUTOMATIC MONOPOD 334B
74.8cm
68cm
166cm
0.49kg
8kg
The automatic, 3 section, monopod provides immediate single handed final
height adjustment. Squeeze the trigger handle and the top section can be
raised or lowered, release and it locks in position. The lower two sections
have a twist lock action for additional height adjustment. The top plate
has a dual 1/4”-3/8” camera fixing screw.
PATENTED
790B
50 photo
676B
695
694
680B
170cm
0.8kg
8kg
The fastest monopod in the world! The 685B features the innovative Neotec
rapid opening and closing mechanism – just pull the leg downwards to open and
it automatically locks in any position, with no screws, knobs, or levers to tighten
or loosen. Then to fold it back up again simply release the safety latch and pull the
trigger and push the leg closed. A convenient rubber pedal attached to the bottom
section allows you to open the monopod without having use your other hand.
It’s ‘upside-down’ leg construction also prevents water or mud from entering the
monopod and a padded leg-warmer protects your hands from hot and cold weather.
679B
682B
681B
334B
685B
6cm
0.27kg
MONOPOD QUICK RELEASE
TILT TOP 234RC
2.5kg
Simple tilt head to allow a camera on a Monopod
to be turned 90° to provide either vertical or horizontal format.
MONOPOD SUPPORT 331
Fixed on the monopod, adds two points of support
making it stable on any surface regardless of the
inclination. Allows long exposures on automatic
release. Comes complete with the Mini Ball Head
482. Attachment - 3/8” female for monopod.
6cm
0.27kg
2.5kg
200PL-14
SHOULDER BRACE
FOR MONOPOD 361
Designed to fit to the top end of any make of
Monopod to give additional stability. Adjustable
length with pivoting shoulder support.
As 234 but with quick release camera plate system
and secondary safety lock.
UNIVERSAL FOLDING
BASE 678
0.42kg
14kg
LONG LENS MONOPOD
BRACKET 393
1kg
This unique accessory allows you to add a base
made of three foldable high strength steel legs
to the Monopods 679B, 680B, 681B. After using
them the legs can be folded and stored inside the
bottom section of the monopod ready in a few seconds when needed.
Specifically developed for use with very long
enses on Monopods. Key features: Friction base
which enables the bracket to pan on Monopod,
also can be used on a tripod. Two rubber hand
grips plus rubber protection to prevent damage
to lens when tilted to maximum. Variable center
height adjustment in three steps.
MONOPOD BELT POUCH
080
SPIKED FOOT
FOR MONOPOD 236
RUBBER/SPIKED FOOT
677SPN
Worn on a belt, this easy to use pouch offers support
for the base of a Monopod.
Converts 679B, 680B and 681B series monopods
rubber foot to a spiked foot.
Rubber foot for with retractable metal spike, for
monopod 681B.
RUBBER SPIKE
FOOT - STAINLESS STEEL
676SP2 - 695SP2 - 449SP2
SUCTION
CUP/RETRACTABLE
SPIKE FOOT
676SC2 - 695SC2 - 449SC2
SUCTION
CUP/RETRACTABLE
SPIKE FOOT
677SCN
A rubber suction cup foot with retractable stainless
steel spike. The suction cup increases the suitable
area of the foot of the monopod by almost 20 times,
giving much greater stability when needed.
The foot can be removed and replaced at will.
676SC2: for monopods 679B and 680B.
695SC2: for monopod 695.
449SC2: for monopod 694.
A rubber suction cup foot with retractable stainless
steel spike. The suction cup increases the suitable
area of the foot of the monopod by almost 20 times,
giving much greater stability when needed.
The foot can be removed and replaced at will.
For monopod 681B.
Reversible rubber/metal spiked foot supplied with
a dedicated fixing tool. The spike is made of a
special hard anodized aluminum alloy extremely
resistant to corrosion.
676SP2: for monopods 679B and 680B.
695SP2: for monopod 695.
449SP2: for monopods 676B and 694.
photo 51
MONOPOD ACCESSORIES
MONOPOD TILT TOP 234
ACCESSORIES
ACCESSORIES
DOLLIES
AND SPREADERS
Manfrotto dollies and spreaders maintain a tripod at a
secure spread. Dollies provide instant manoeuvrability
around the studio or on location and all have fast action
foot controlled braking systems.
VIDEO DOLLY 114
8cm
112cm
Heavy duty, super sturdy dollies are designed for use with large still and video
tripods. They feature large 127mm individually braked wheels with cable guards.
Folds for transporting.
Designed for Manfrotto’s Tripods: 161MK2B, 058B, 475B.
BASIC DOLLY 127
PORTABLE DOLLY 127VS
2.4cm
3.4cm
110cm
78 to 114cm
Designed for light and medium weight tripods. The 76mm wheels have
a sure-lock feature that raises the wheels free of the ground so that the
dolly rests on separate feet.
Designed for Manfrotto’s Tripods: 055PROB, 055CLB, 055DB, 055MF3,
055MF4, 458B, 190XPROB, 190XB.
Everything that the 127 has with the addition of variable spread to the legs.
Suitable for standard and spiked feet.
Designed for Manfrotto’s Tripods: 055PROB, 055CLB, 055DB, 055MF3,
055MF4, 458B, 190XPROB, 190XB.
TRIPOD SPREADER 165
FOLDING AUTODOLLY 181B
0.65kg
80 to 130cm
Universal tripod spreader with variable diameter width controls from 80cm
to 130cm.
Designed to work with most Manfrotto tripods.
52 photo
4.5kg
127cm
Single lever braking system controls all three 80mm wheels. Includes 3/8”
attachment which allows you to fix a head for low angle shooting.
It folds legs for transporting and storage.
Designed for Manfrotto’s Tripods: 161MK2B, 058B, 028B, 475B.
ACCESSORIES
SHORT COLUMN 055CCSB
SHORT COLUMN 190CCSB
To improve the positioning flexibility of our tripods,
a shorter center column is now available as an
accessory which can be ordered separately.
If you need to work with legs set at the third angle
of inclination (about 60°) but still require the
possibility to move the camera up and down to
achieve perfect adjustment for the shot, this
shorter column replaces the one supplied with
the tripod.
The lengths are:
- 17.5 cm for the 055CCSB.
- 16.5 cm for the 190CCSB.
190CCSB for tripods series 190.
055CCSB for tripods series 055.
LOW ANGLE ADAPTER
FOR 190XB 190LAA
LOW ANGLE ADAPTER
FOR 055DB & 055CLB
055LAA
Low angle adapter to store at the bottom of the
center column when the tripod legs angle is set to
43°, 73° and 90°.
TWO SECTION CENTER
COLUMN FOR 190 RANGE
190TSB
TWO SECTION CENTER
COLUMN FOR 055 RANGE
055TSB
This new center column design allows to leave
the head mounted on the center column when
switching between low angle and normal shooting
position. The top section can be detached without
any tools, by hand-unscrewing the knob at the
bottom of the column.
190TSB: supplied as a standard with the 190MF3
and 190MF4.
055TSB: compatible with all 055 range of tripods,
supplied as a standard with the 055PROB, 055MF3,
055MF4 and 458B.
PAT. PENDING
LEV. CENTER COLUMN 555B
LEV. CENTER COLUMN 556B
TABLE CENTER POST 131TC
Geared column with clamp for table thickness
from 18-38mm, for supporting a camera adjustable
between 5cm and 66cm.
Head not included.
Our innovative system means you can quickly
level your photo or video head without needing
to make time-consuming adjustments to the length
and angle of each single tripod leg. One of the most
common problems in still photography and, above
all, video has been resolved by Manfrotto, thanks
to the use of a 50mm diameter leveling half ball
mounted at the top of a tripodcenter column so
as to make the angle of the top plate independent
of the rest of the tripod. Locking and unlocking
of the half ball is via a turning grip on the bottom
of the center column, which can be removed
during fitting of the column to your existing tripod.
The half ball-mounted plate has a male 3/8”
screw for attachment to a photo or video head,
and a bubble spirit level for added ease of use.
LEVELING
CENTER COLUMN ANGLE
BRACKET 553
Working with the center column in the horizontal
position on Manfrotto tripod models 055, 190
and NEOTEC tripod family has always caused a
slight difficulty, in that the head remains at 90° to
the ground making it more difficult to position the
camera correctly for shooting. Now this simple but
had the most stable platform possible for filming,
and that we could use ever-lighter materials, from
aluminum to carbon fiber, to keep equipment weight
to the bare minimum.
555B for tripods series 055.
556B for tripod series 190.
PAT. PENDING
ACCESSORY ARM 131DB
Mounts on any column with 3/8” thread, this side
arm allows positioning of two heads on a 90°
perpendicular angle.
Length: 600mm
AIR CUSHIONED TABLE
CENTER POST 385
In view of the increasing demand for shop display
systems for still & video cameras, we have produced
a center column equipped with a standard 58mm
disc and three grub screws as used on our 190
and 055 tripods. This also means the column can
be combined with any head from our range. The
bottom of the column has an 80mm disc which
can be screwed directly to countertop/table or,
alternatively, bolted to the included second disc
on the underside of the countertop. Specifications:
Column diameter: 30mm / 26mm Minimum Height
36cm Maximum Height 62cm Weight 1.1kg Load
capacity 10kg. Available only in black finish.
ACCESSORY ARM FOR
4 HEADS 131DDB
Similar to the 131DB with the addition of two
positional head mounts on the side arm allowing
the possible mounting of four heads.
Length: 600mm
ADAPTOR FROM 3/8”
TO 1/4” 120
Converts tripod head screw from 3/8 “ to 1/4”.
Diameter: 60mm
photo 53
ACCESSORIES
MONITOR/PROJECTOR
HOLDER 183
CAMERA BRACKET 233B
1kg
1kg
20kg
Made of sturdy aluminum, this 25x35cm platform
can support up to 20kg. It is ideal as a projector
or monitor stand.
ELBOW BRACKET 340
0.32kg
As for the 355 but designed to be mounted to a
wall. Comes complete with the Monopod Tilt Head
234.
TABLE SUPPORT 355
This simple table mounting support is supplied
with three holes for fixing or clamping.
Comes complete with the Monopod Tilt Head 234.
JUNIOR ELBOW
BRACKET 341
0.32kg
The Junior Elbow Bracket enables you to rapidly
change from a horizontal to a vertical shooting
axis, without having to reposition the tripod.
Its adjustable stop prevents accidental camera
rotation. Great for small & medium sized cameras
equipped with telephoto lenses. Its new design
allows you to use this handy accessory on all heads
equipped with the 200PL type of camera plate.
LONG LENS CAMERA
SUPPORT 359
0.69kg
A very useful addition to any photographers
complement of attachments. Complete with Super
Clamp 035C and Mini Ball Head 482.
Fully adjustable between 40cm and 60cm with a
simple telescopic locking device.
54 photo
Folding down to a portable 30cm, this Danish
designed base holds most projectors easily on
a tripod. Tapped on the bottom for 3/8” screws.
Camera flash bracket with telescopic column from
30cm to 45cm.
The “Elbow Bracket” enables one to rapidly change
from a horizontal to a vertical shooting position,
without having to reposition the tripod and to keep
an axis of vision which is vertical to the tripod itself,
thus avoiding the threat of tilting. Compatible with
the following heads: 029, 229 and 488RC0.
Comes complete with 1/4” to 3/8” screws.
WALL SUPPORT 356
FOLDING BASE
FOR PROJECTOR 246
ACCESSORIES
ANTI THEFT PLATE 030AT
045kg
For heads with hexagonal plates. Key lock system
for camera release and 200cm steel cable.
LEG WARMERS 380
Set of 3 Manfrotto Patented Leg Warmers, which
have a zip system so they can be easily fitted and
will not slip down in use. Offer good grip. Protect
the legs and insulate your hands when using the
tripod in cold weather.
For tripods series 055. Length 355mm.
LEG WARMERS 381
For tripods series 190. Length 250mm.
TELEPHOTO LENS
SUPPORT 293
Support for medium telephoto lens. The length of
the bracket is adjustable to take different length
lenses and different diameters by tilting the Tilt
Head 234RC (included). Length from head to lens
support adjustable from 200 to 295mm.
Attachments: 4x3/8” female and 3x1/4” female.
ACCESSORY LONG PLATE
430
Allows two camera mounting positions. Supplied
with 2x1/4” and 2x3/8” camera fixing screws.
Dimension: 280x80x10mm
MACRO BRACKET FLASH
SUPPORT 330B
0.35kg
1kg
Allows two flash heads to be mounted with a
camera onto a tripod head.
Attachments: 3/8” & 1/4” female threads & 1/4”
camera fixing screw.
MICRO
POSITIONING PLATE 454
0.45kg
8kg
Ideal for macro photography to make precise
positioning movements to achieve the perfect
framed shot, for QTVR and other precise copy/
repro work, the new sliding plate has finger-tip
control for hairsbreadth positioning but with a
simple lock-release lever for fast set-up. Two plates
can be interlocked at 90 degrees for full lateral/
forward/ /back movement (over 120mm).
In extruded aluminum, the plate has 1/4” and 3/8”
holes and screws for tripod and camera mounting.
Dimension: 180x57,5x6mm
TOOL KIT WMANTOOL
Set of tools (2) to adjust the locking collars of most
of Manfrotto’s tripods, stands and Monopods.
The kit comprises a PHILLIPS screwdriver TYPE 2
and a hexagonal tubular SOCKET N. 8.
photo 55
ACCESSORIES
CAMERA MOUNTING
STUD 037
SMALL ADAPTOR
088LBP
JOINT FOR ARMS
120DF
Reversible stud with 3/8” and 1/4”
designed for mounting cameras
flush on 035C Super Clamp.
Converts 1/4” screw to 3/8”.
Adapter 3/8” F-1/4” F allows using
accessory arms 131DB and 131DDB
as column extensions.
Diameter: 60mm
DOUBLE BALL TILT
HEAD 155RC
CAMERA MOUNTING
ADAPTOR 208
CAMERA MOUNTING
ADAPTOR
HEXAGONAL PIN
208HEX
15cm
0.6kg
5kg
200PL-14
Not strictly a tripod head, but an
extremely versatile camera support
for compact and 35mm cameras
used in conjunction with Super
Clamp 035C. Supplied with quick
release camera plate and secondary
safety lock.
PUMP CUP WITH
FLAT BASE 241FB
Allows use of 3/8” camera mounting
plate in to 16mm socket. Compatible with 035C Super Clamp and
484RC2 or 486RC2 Ball Head for
example.
Its main feature is the hexagonal
pin, which, compared to the 208’s
round one, gives more grip when used
to hold heavy cameras mounted on
photo or video heads in combination
with accessories like the super
clamp 035C.
FLASH SHOE 143S
Flash shoe.
PUMP CUP 241
1.2kg
Suction cup for small fixtures and
lightweight equipment. Ø: 150mm.
CAMERA SUCTION
MOUNT 241V
METZ FLASH SCREW
248
NIKON FLASH
ADAPTOR 262
Converts Nikon flash mount to
universal flash bracket.
0.62kg
1.5kg
A special long 1/4” camera screw
used in conjunction with the hexagonal 030 camera plate which allows
you to fit the Metz flash bracket.
Suction Cap for lightweight photographic and video equipment, such
as 35mm. SLR, digital cameras
and lightweight video cameras. The
60mm diameter disc with a 3/8” W
male thread is built in the pump cup
and enables you to mount most of
Manfrotto’s heads.
Attaches to most non-porous surfaces.
Ideal camera support in automobile
or next to a window.
SURVEY ADAPTOR
273
SURVEY PLATE
ADAPTOR 324
Converts tripod head screw from
3/8” threads to 5/8”.
This adaptor is made of two pieces:
a 5/8” bushing with a 3/8” female
attachment to connect it to a tripod
and a removable plate 124mm
diameter with a 5/8” male thread
that should stay connected to the
equipment. With the 324 it is possible to transform any Manfrotto
tripod into a tripod compatible with
the standard attachment interface
system used in the survey and
measuring industry.
56 photo
3kg
SURVEY PLATE
ADAPTOR
ACCESSORY PLATE
358
Spare plate code for 324.
ACCESSORIES
SUPER CLAMP 035C
BINOCULAR SUPER
CLAMP 035BN
0.25kg
This universal clamp can be securely mounted on
any tube from 13 to 45mm. Attachment is 5/8”
hexagonal socket. Equipped with ratchet handle.
CAR WINDOW POD 243
Used for attaching either 482 or 234 heads to a
window or narrow sill. Attachment screw is 3/8”.
Ball head not provided.
PHOTO CLAMP 296
Can be fixed to surfaces up to 60mm thick. Has
2x3/8” male threads for mounting ball head and
camera.
0.25kg
Designed to securely hold binoculars.
VARIABLE FRICTION ARM
WITH QUICK RELEASE
PLATE 244RC
MAGIC ARM WITH QUICK
RELEASE PLATE 143RC
1.09kg
1.11kg
4kg
200PL-14
Articulated arm with large locking knob. Variable
friction and locking of arm obtained by adjusting
the knob. Supplied with quick release camera
plate with secondary safety lock based on the
200PL-14 camera plate mechanism. Ideal for
mounting a photographic or video camera exactly
at the angle you need it. Fits any 5/8” female
socket, works especially well with 035C Super
Clamp.
4kg
200PL-14
Your extra arm in the studio. One lever locks three
pivot points. Supplied with a quick release camera
plate with secondary safety lock based on the
200PL-14 system. Ideal for mounting a camera
or a camcorder exactly at the angle you need it.
Fits any 5/8” female sockets, works especially
well with 035C Super Clamp.
COLUMN CLAMP 349
Versatile clamp designed to work in conjunction
with removable tripod columns of between 25 to
28mm diameter such as the 055 and 190 series
tripods. The Column Clamp can be securely fixed
to solid surfaces or bars up to 55 mm width. The
column with head is inserted into the clamp and
locked in position at the required height. The ideal
accessory for nature photography or support for
binoculars and scopes.
photo 57
ACCESSORIES
SPECIAL ADDITIONAL FEET
A complete line of foot conversions to adapt our tripods
and monopods to all type of terrains in order to give
them the maximum stability possible.
RUBBER
SPIKED FOOT
STAINLESS STEEL
055SPK2
190SPK2N
440SPK2
441SPK2
439SPK2
SUCTION CUP/
RETRACTABLE
SPIKE FEET
055SCK2
190SCK2N
440SCK2
441SCK2
439SCK2
Reversible rubber/metal spiked feet
(set of 3) supplied with a dedicated
fixing tool. The spike is made of a
special hard anodized aluminum
alloy extremely resistant to corrosion.
A rubber section cup feet (set of 3)
with retractable stainless steel spike.
The suction cup increases the suitable area of foot of the monopod by
almost 20 times, giving much greater
stability when needed. The foot can
be removed and replaced at will.
055SPK2 for tripods:
055CLB and, 055PROB.
055DB,
190SPK2N for tripods: 190XB and
190XPROB
440SPK2 for tripods: 725B, 728B,
190MF3 and 055MF4.
055SCK2 for tripods:
055CLB and, 055PROB.
055DB,
190SCK2N for tripods: 190XB and
190XPROB.
441SPK2 for tripod: 055MF3.
440SCK2 for tripods: 725B, 728B,
190MF3 and 055MF4.
439SPK2 for tripod: 190MF4.
441SCK2 for tripod: 055MF3.
RETRACTABLE
SPIKED FOOT
ADAPTER 055SPK
Rubber feet (set of 3) for with
retractable metal spike.
For tripod: 055MF4.
SNOW SHOES 230
Attach to tripod feet or monopods to
provide stability in snow, mud or soft
ground (set of 3).
For tripods: 190XB, 190XPROB,
190MF3, 190MF4, 055DB, 055CLB,
055PROB, 055MF3, 055MF4, 458B,
028B, 475B, 058B and 161MK2B.
Diameter: 138mm
439SCK2 for tripod: 190MF4.
PLATES
PLATE ADAPTORS
SLIDING PLATE
ADAPTOR 577
HEXAGONAL PLATE
ADAPTOR 625
RECTANGULAR
PLATE ADAPTOR 323
“DOVE TAIL” PLATE
ADAPTOR 384
Supplied with 1/4” and 3/8” camera
fixing screws.
Fixing 1/4” and 3/8” thread.
501PL sliding plate included.
Supplied with 1/4” and 3/8” camera
fixing screws. Fixing 1/4” and 3/8”
tread. 030 hexagonal plate included.
Equipped with 2 built-in spirit levels.
Supplied with 1/4” camera fixing
screws. Fixing 1/4” and 3/8” tread.
200PL rectangular pate included.
Supplied with 1/4” and 3/8” camera
fixing screws.
Fixing 1/4” and 3/8” thread.
384PL and 384PLARCH plates
included.
PLATE ADAPTOR
394
SLIDING PLATE
ADAPTOR 357
Supplied with 1/4” and 3/8” camera
fixing screws. Fixing 1/4” and 3/8”
thread. 410PL plate included.
Equipped with 2 built-in spirit levels.
Supplied with 1/4” and 3/8” camera
fixing screws.
Fixing 1/4” and 3/8” thread.
357PLV sliding plate included.
Dimension: 140x44x6mm
58 photo
ACCESSORIES
HEXAGONAL PLATES
HEXAGONAL PLATE
030
ARCH HEXAGONAL
PLATE 030ARCH
HEXAGONAL PLATE
030HAS
HEXAGONAL PLATE
130
030-14 with 1/4” screw.
030-38 with 3/8” screw.
Provides alignment for 90° shots with
35mm SLR camera.
030ARCH-14 with 1/4” screw.
030ARCH-38 with 3/8” screw.
For Hasselblad cameras.
Supplied with both 1/4” and 3/8”
screw.
130-14 with 1/4” screw.
130-38 with 3/8” screw.
RECTANGULAR PLATES
RECTANGULAR
PLATE 200PL
200PL-14 with 1/4” screw.
200PL-38 with 3/8” screw.
ARCH
RECTANGULAR
PLATE 200PLARCH
UNIVERSAL “ANTI TWIST”
SPOTTING SCOPE PLATE 200USS
Provides alignment for 90° shots with
35mm SLR camera.
200PLARCH-14 with 1/4” screw.
200PLARCH-38 with 3/8” screw.
This adapter plate has been specifically designed to eliminate unwanted
rotation of the spotting scope during viewing. Its universal design means it
can be used to mount all makes of spotting scope, no matter what their foot
shape (square, rectangular, trapezium), on any Manfrotto two-way head with
rapid RC2 connector system. The adapter is made from machine-tooled
aluminum with a black anodized finish. In addition to the standard 1/4” screw,
it has two grub set screws to lock the spotting scope securely in position.
“DOVE TAIL” PLATE
384PL
“DOVE TAIL” ARCH.
PLATE 384PLARCH
ACCESSORY PLATE
410PL
384PL-14 with 1/4” screw.
384PL-38 with 3/8” screw.
For 384 adapter.
Provides alignment for 90° shots
with 35mm SLR camera
384PLARCH-14 with 14” screw.
384PLARCH-38 with 3/8” screw.
Supplied with 1/4” and 3/8” camera
fixing screws.
PLATE 501PL
SLIDING PLATE
357PLV
PLATE 785PL
SPECIAL PLATES
LARGE PLATE 030L
Large 10x10cm plate with 1/4” and
3/8” screw.
ACCESSORY PLATE
400PL
400PL-LOW = 13mm H.
400PL-MED = 23mm H.
400PL-HIG = 42mm H.
Supplied with 1/4” and 3/8” camera
fixing screws.
Dimension: 86x38x11mm
Supplied with 2x1/4” and 2x3/8”
camera fixing screws.
Dimension: 140x44x6mm
Supplied with 1/4” camera fixing
screw.
photo 59
ACCESSORIES
TRIPOD BAGS
End opening allows for faster “quiver”- style
extraction and insertion of the tripod.
Adjustable carrying handle for better balance during
transportation heavy heads mounted on the tripod
(on models MBAG120P, MBAG100P, MBAG90P).
High quality, durable
ballistic nylon
A tripod is a wonderful thing. Carrying one never has
been... until now. At Manfrotto, we know more than
most about the subject, so it was in our own interests
as much as it was in yours to develop a complete range
of carrying and transportation solutions designed
around the one piece of photo or video kit that most bag
manufacturers conveniently choose to ignore... our own
beloved tripod. With our new carrying systems, we’ve
worked from the inside out to invent new contoured bag
shapes that fit your kit and offer convenient ways of
setting up and breaking down faster, a “space pad”
that lets you shoulder carry your tripod without risking
bangs and bruises, an open backpack that keeps
your hands free, your tripod protected and weight to a
minimum. Whether you want a handle or strap that
doesn’t even have to be removed from your tripod
when you set up a shoot, or whether you need a
protective shell to get your kit safely through baggage
hall hell, we’re pleased to say we’ve got the solution.
With innovative technical features, prime materials
and first class construction methods, the quality of
all our bags and carrying solutions is up to the high
standards you expect from Manfrotto.
Central handle
(on models MBAG120P).
End handle (on models MBAG120P,
MBAG100P, MAGB90P, MBAGB80).
Easy-grip zip opening
Padded end protects
tripod head
Shoulder strap
Padded Tripod Bag
(models MBAG120P, MBAG100P,
MAGB90P, MBAG80P).
60 photo
Internal pocket holds
video head pan bar
(on models MBAG120P,
MBAG100P, MAGB90P).
ACCESSORIES
PADDED TRIPOD BAG 120CM MBAG120P
The largest bag in the range, the MBAG120P is padded to protect your equipment and has the following features:
• Asymmetric tapered shape allows you to store the tripod with the head attached.
Tripod legs fit comfortably in the narrower end (diameter 20cm) and extra space is allowed for the larger volume of the head at the wider end (diameter 23cm).
• Zip extends down the length of the bag, but also fully opens the top end of the bag.
• Thermoform padding holds the tripod in place in the bag and protects it, especially the head, during transport.
• Inner pocket holds accessories (such as video head pan bars).
• Innovative design and style; ballistic nylon, zips and other materials used are of top quality.
• Can be hand-carried horizontally by the side handle, vertically by the end handle (also useful for storage), or shoulder-carried using the included strap.
PADDED TRIPOD BAG 100CM MBAG100P
Same design of MBAG120P different size and without the double positioning carrying handle.
PADDED TRIPOD BAG 90CM MBAG90P
Same design of MBAG120P different size and without the double positioning carrying handle.
PADDED TRIPOD BAG 80CM MBAG80P
Basically the same as MBAG120P, but smaller, and without the side handle or inner accessory pocket. The MBAG80P is also narrower that the other padded bags.
The narrow end measures 13cm diameter, the wide end measures 15cm.
UNPADDED TRIPOD BAG 80CM MBAG80
The MBAG80 is an unpadded tripod bag.
• Slightly tapered to provide a better fit for your tripod with attached head. The wider end of the bag accommodates the head without requiring all levers to be removed.
• Zip extends down the length of the bag, but also fully opens the top end of the bag.
• Logo end cap is padded to offer protection to the tripod head, the rest of the bag is unpadded.
• Shoulder strap included (the MBAG80 doesn’t have either end or side handle).
• Innovative design and style; ballistic nylon, zips and other materials used are of top quality.
UNPADDED TRIPOD BAG 70CM MBAG70
Same as MBAG80, but slightly smaller.
MINI AIR BAG MBAGD
A
D
A
A
D
A
A
TRIPOD WITHOUT HEAD
D
A
701RC2
D
D
700RC2
D
A
B
390RC2
D
D
A
B
D
128RC/128LP
B
D
TWO WAYS HEAD MODEL
B
D
808RC
B
D
804RC
490/490RC4
A
488RC2/488RC4
D
A
C
D
488/488RCO
A
B
D
486/486RC2
D
A
B
D
484/484RC2
C
B
482
D
058B
B
468MG
055PROB/055MF3
B
D
460MG
D
410
229
B
C
405
222
B
D
028B
400
160
B
055DB/055CLB/055MF4
Photo Tripod Model
322RC2
056
Photo Head Model
The smallest and simplest model in the range, the MBAGD is an unpadded rucksack-style bag for small tripods.
It has a bungee cord top opening and adjustable straps. In resistant nylon with printed Manfrotto logo.
C
A MBAG 120P
D
D
D
D
B MBAG 100P
D
D
D
D
B
A
C MBAG 90P
A
D MBAG 80, MBAG 80P
A
161MK2B
190XB/190MF4
E
E
D
D
E
E
E
E
E
E
E
E
E
E
MBAG 70P
190XPROB
E
D
D
D
E
E
E
E
E
E
E
E
E
F
MBAG D
458B
D
C
D
D
D
D
D
D
D
D
D
D
D
D
G 345BAG
B
B
A
B
475B
B
B
B
B
D
B
D
B
B
B
B
B
C
709B/709BR
G
714B
F
714SHB
F
718B
F
718SHB
F
724B
F
728B
F
photo 61
ACCESSORIES
LONG STRAP 102
The 102 strap is a basic but convenient way to carry your kit. It has a spring clip
that fastens quickly to the steel ring at the shoulder of the tripod, and a closed
loop that goes around the feet of the tripod and tightens to grip them securely.
Features an adapter for compatibility with all Manfrotto tripods and rubberised
fabric for comfort and to avoid the tripod slipping on your shoulder.
LONG STRAP 440STRAP
Same as 102, but made with a narrower black rubberised fabric (40mm width
instead of 50mm).
SHORT STRAP 402
The 402 is a simple loop strap, with a single spring clip that attaches quickly to
the steel ring at the shoulder of your tripod. Features an adapter for compatibility
with all Manfrotto tripods.
Strap is in grey rubberised fabric for comfort and to avoid the tripod slipping on
your shoulder.
SHORT STRAP 441STRAP
Same as 402, but made with a narrower black rubberised fabric (40mm width
instead of 50mm).
APRON SUPPORT 166
Three compartments hang below the column supported by straps above the
leg locks.
Fits most Manfrotto tripods.
62 photo
ACCESSORIES
QUICK ACTION STRAP 401N
A quick and easy accessory for carrying your tripod when walking, hiking, cycling or just getting from shoot to shoot. Use the shorter straps to fasten the padded 401N to
one of the legs of your tripod, bind the remaining legs together using the longer adjustable quick release straps, sliding the tripod over your shoulder and you’re ready to
go, with your hands free to grab those vital last minute items. The padding helps hold the tripod in place and protects your back from bruises and chaffing. The 401N even
stays attached to your tripod when shooting (all you need to do is release the longer quick release straps so you can manoeuvre and position all three legs), so you’re always
ready to capture the images you want, but also always ready to move off again to the next location.
The strap stays attached to
your tripod when shooting
Straps can be removed and custom-positioned
to better match the size of your tripod
BUCKET BACKPACK 540BB
Faster to use than a traditional back pack; more convenient than having to carry your tripod in your hand or under your arm - the bucket back pack is especially useful on
longer journeys or on wilder terrain, where you still need to know that you can release the tripod, set up and shoot in seconds. It’s designed to hold any of our tripods with
any video head attached: the head is placed in the lower “bucket” where its weight is better supported and less likely to swing off balance and hurt you, the legs extend up
your back and are firmly tied in position. For birdwatchers, aeroplane enthusiasts and other users of spotting scopes, the bucket backpack will also let you transport your
whole kit, with scope attached - as shown, the scope is cradled in the lower part of the back pack, and the tripod legs extend up your back.
HAND A LONG 458HL
Hand carrying strap system for 190 and 055 range of tripods, made of two adjustable straps, one to set the hooks distance when mounted on the 055 or 190 models and
the second to bind together their legs to avoid their opening during the transportation.
photo 63
EDUCATIONAL
HOW TO
LESSONS
Together with WebPhotoSchool - seasoned professionals
of the photographic tutorial - we’ve prepared a series
of “real life” photoshoot situations to help new and
experienced photographers alike to get the most from
their Manfrotto equipment. Focused 100% on improving
your images, these tutorials are an invaluable way either
to gain the competitive edge in a crowded photographic
market, or just make your hobby more rewarding.
All lessons are available free of charge on our website
www.manfrotto.com/howtolessons
HOW TO USE A TRIPOD: THE BASICS
A ‘good’ tripod is a fundamental part of any photographer’s kit, and is well worth its weight
in gold - especially since tripods are getting lighter all the time. A quality tripod can provide
you with the sharpest possible pictures from your expensive camera and lenses, and allow
you get those shots you’ve only dreamed of - giving you time to think more carefully about
composition. In fact it will probably improve your hit rate more than any other piece of equipment you use.
SHOOTING GLAMOUR IN THE STUDIO
Glamour photography often uses the same lighting setups as traditional portraits. However,
modifying this standard approach can add more life, more interest to your shot: we’ll show
you a couple of simple modifications you can make to a portrait lighting setup to enhance the
appeal of your images
COBRA ON THE WATER
In the auto advertising industry, floating a car is commonplace and requires a lot of planning,
manpower and hard work. This lesson will show you how to do the same thing on a much
smaller, simpler scale. The techniques we will present in this lesson can easily be applied to
numerous different subjects
64 photo
There are many things to consider when you leave the studio to shoot portraits outside:
weather, time of day, and the background to name a few. In this lesson we will show you
how to get the same control you have in the studio when you’re on location.
A DIFFERENT VIEW ON JEWELLERY PHOTOGRAPHY
Setting up the camera from a new angle, using different props and backgrounds for increased
impact and using controlled lighting to highlight the features of your products are some of the
tricks we will cover in this lesson.
A CLOSE UP LOOK AT MACRO PHOTOGRAPHY
The aim of close-up and macro photography is almost always to get pin-sharp, detailed photos of the subject. But the effect can be ruined by hand-holding the camera - using a tripod
will allow you both to get close to your subject and to keep the camera perfectly still to avoid
micro-blur.
TRIPODS AND TELEPHOTOS
To get a sharp image when hand-holding the camera, a useful rule of thumb is that the minimum shutter speed should be set to one over the focal length of the lens. So if you have
a 250mm lens for wildlife or sports photography, the minimum shutter speed you can hand
hold the camera is 1/250 of a second, and even then you need a steady hand. New tripods
and heads help you get sharp images without sacrificing the framing freedom of hand-held
shots.
SHOOTING COASTAL PANORAMAS
Capturing that stunning sunset or expansive vista can be a challenge: often, the view in front
of your camera is too broad to fit into a single photo frame. This lesson will show you how to
shoot multiple shots of a horizon from one point, then “stitch” them together into one panoramic image.
photo 65
EDUCATIONAL
SHOOTING PORTRAIT ON THE BEACH
EDUCATIONAL
LOCAL
HEROES
Speaking to our distributors and retailers around the
world, we realised we had a vast untapped resource
- all the professional and amateur photographers who
had years of experience using Manfrotto equipment to
get astounding results and breathtaking images, and
who had been helping other photographers to also get
the most out of their gear through courses, tutorials,
photoblogs and friendly advice. Local heroes is our
way of saying thank you to some of those generous
photographers by presenting their work to you - some
of the names you’ll have heard of before, others will
hopefully be new to you, all are very precious to us!
www.manfrotto.com/localheroes
Ph. Milko Marchetti
66 photo
Ph. Guido Sterkendries
EDUCATIONAL
Ph. Jae-Hyun Seok
Ph. Bill and Linda Lane
Ph. Maxim Poluboyarinov
Ph. Scoot Highton
photo 67
EDUCATIONAL
IN SEARCH
OF DIGNITY
AND JUSTICE:
THE UNTOLD
STORY
OF MUMBAI’S
CONSERVANCY
WORKERS
68 photo
photo 69
EDUCATIONAL
EDUCATIONAL
PHOTO DOCUMENTARY
About 3000 conservancy workers, also known as sweeper, are employed by the Greater Bombay Municipal
Corporation. These workers pick up the city’s garbage,
sweep the streets, clean the gutters, load and unload
garbage trucks and work on dumping grounds.
All 30,000 of them are Davits, belonging to the lowest
rung of the Indian caste system. They have little or no
education. Without exception, all of them despise their
work. Most of them are alcoholics and live in poverty,
in dismal housing. They are perpetually in debt despite
earning what by Indian standards is a decent wage of
US $ 152 per month. The workers abuse their wives
and children. When the husbands die usually at a young
age, the job passes to the widows. The despair continues.
Two years ago, quite by accident I descended into the
“living hell” – a phrase which quite accurately describes
the life of these workers. What I saw shook me to the
core of my being. That, thousands of men and women
were living and working in such dehumanizing conditions filled me with rage and shame.
I wanted to know everything about these workers. I
wanted to know them not just as workers but also as
brothers and fellow human beings. I wanted to know
their names and what they thought about themselves,
their work, their families, and their employers. I also
wanted to know how they felt about the citizens of
Mumbai. And, at a very personal and important level, I
wanted to know what they thought about me – one of
their own who had escaped their living hell.
70 photo
photo 71
EDUCATIONAL
EDUCATIONAL
When they gave me permission “to shoot them”, their generosity moved me to tears. I explained in detail what I would have to
do in order to tell their stories and told them again and again to reconsider. They said that they did not hope much less expect
anything to change for themselves. But if what I was doing could bring about even the smallest change in the lives of their children, they would be “eternally grateful” to me.
My rage and shame,
their faith and trust – these are
the forces that have impelled
over the past one year to
“search for dignity and justice”,
to tell the “untold story
of conservancy workers”.
At this stage, I must point out
that since I have to work for a living,
I have not been able to devote
full time to this commitment.
Nonetheless, I would like to share some images of this story with you. I share them with humility as there is much still that I do not
understand. And there is much more that I want to do.
One of the most important things that I want to do concerns the very role of the photographer himself/herself. I feel strongly that
it is not enough for me to bear witness and to document reality. I must also initiate a process of reflection and action. Especially
among two key groups.
The first group is the Corporation which employs the workers. I want to dialogue through my images with the corporation in an
attempt to work out what the Corporation can do to make working and living conditions more humane and just?
I also want to direct the call for reflection and change towards the public at large. I want the citizens to “see” the workers and to
acknowledge their presence and contribution. I want to create images that drive home the point that without this workforce life in
the city would be a life of ill health, disease and even death.
72 photo
SUDHARAK OLWE
photo 73
EDUCATIONAL
THIS IS WHAT I WANT
TO CONCENTRATE IN
THE NEXT PHASE OF MY
WORK. ONLY THEN WILL
I BE TRUE TO MY VISION
OF PHOTOGRAPHY,
WHICH IS TO GIVE A CALL
TO ACTION, TO URGE
FELLOW HUMAN BEINGS
THROUGH MY PICTURES
TO CHANGE THE PICTURE.
INDEX
9
Art. N°
Description
Page
028B
TRIMAN TRIPOD
200PL
RECTANGULAR PLATE
030
HEXAGONAL PLATE
59
200PLARCH
ARCH. RECTANGULAR PLATE
59
030ARCH
ARCH HEXAGONAL PLATE
59
200USS
UNIVERSAL “ANTI TWIST” SPOTTING SCOPE PLATE
59
030AT
ANTI THEFT PLATE
55
208
CAMERA MOUNTING ADAPTOR
56
030HAS
HEXAGONAL PLATE
59
208HEX
CAMERA MOUNTING ADAPTOR HEXAGONAL PIN
56
030L
LARGE PLATE
59
222
GRIP ACTION BALL HEAD BLACK
43
035C
SUPER CLAMP
57
229
3D PRO HEAD
34
035BN
BINOCULAR SUPER CLAMP
57
230
SNOW SHOES
58
037
CAMERA MOUNTING STUD
56
233B
CAMERA BRACKET
54
055CCSB
ALU SHORT COLUMN
53
234
MONOPOD TILT TOP
51
055CLB
055 CLASSIC
15
234RC
MONOPOD QUICK RELEASE TILT TOP
51
055DB
055 BASIC
15
236
SPIKED FOOT FOR MONOPOD
51
055LAA
LOW ANGLE ADAPTER FOR 055 RANGE
53
241
PUMP CUP
56
055MF3
MAGFIBER PRO TRIPOD 3 SECTION
13
241FB
PUMP CAP WITH FLAT BASE
56
055MF4
MAGFIBER PRO TRIPOD 4 SECTION
13
241V
CAMERA SUCTION MOUNT
56
055PROB
055 PRO
14
243
CAR WINDOW POD
57
055SCK2
SUCTION CUP/RETRACTABLE SPIKE FEET
58
244RC
VARIABLE FRICTION ARM WITH QUICK RELEASE PLATE
57
055SPK
RETRACTABLE SPIKED FOOT ADAPTOR
58
246
FOLDING BASE FOR PROJECTOR
54
055SPK2
RUBBER/SPIKED FOOT STAINLESS STEEL
58
248
METZ FLASH SCREW
56
055TSB
TWO SECTION CENTER COLUMN FOR 055 RANGE
53
262
NIKON FLASH ADAPTOR
56
056
3D JUNIOR HEAD
36
273
SURVEY ADAPTOR
56
058
TRIAUT TRIPOD
8
293
TELEPHOTO LENS SUPPORT
55
080
MONOPOD BELT POUCH
51
296
PHOTO CLAMP
57
088LBP
SMALL ADAPTOR
56
300N
PAN ROTATION UNIT
49
102
LONG STRAP
62
303
PAN HEAD
48
114
VIDEO DOLLY
52
303PLUS
PRECISION PAN HEAD
47
120
ADAPTER FROM 3/8” TO 1/4”
11
303SPH
MULTI ROW PAN HEAD
46
120DF
JOINT FOR ARMS
56
303SPHUK
UPGRADE KIT: CONVERTS 302 INTO 303SPH HEAD
46
127
BASIC DOLLY
52
322RA
ADDITIONAL CAMERA PLATE FOR 322RC2
40
127VS
PORTABLE DOLLY
52
322RC2
HORIZONTAL GRIP ACTION BALL HEAD
40
128LP
MICRO VIDEO HEAD
37
322RS
ELECTRONIC SHUTTER RELEASE KIT
41
128RC
MICRO VIDEO HEAD BLACK
37
322RSM
CABLE SHUTTER RELEASE KIT
41
130
HEXAGONAL PLATE
59
323
RECTANGULAR PLATE ADAPTOR
58
131DB
ACCESSORY ARM
11
324
SURVEY PLATE ADAPTOR
56
131DDB
ACCESSORY ARM FOR 4 HEADS
11
330B
MACRO BRACKET FLASH SUPPORT
55
131TC
TABLE CENTER POST
53
331
MONOPOD SUPPORT
51
143RC
MAGIC ARM WITH QUICK RELEASE PLATE
57
334B
AUTOMATIC MONOPOD
50
143S
FLASH SHOE
56
337
HOT SHOE TWO AXIS BUBBLE LEVEL
49
155RC
DOUBLE BALL TILT HEAD
56
338
LEVELING BASE
49
160
HEAVY-DUTY HEAD
35
340
ELBOW BRACKET
54
161MK2B
SUPER PRO TRIPOD
7
341
JUNIOR ELBOW BRACKET
54
165
TRIPOD SPREADER
52
345
TABLE TOP TRIPOD KIT
25
166
APRON SUPPORT
62
349
COLUMN CLAMP
57
181B
FOLDING AUTO DOLLY
52
355
TABLE SUPPORT
54
183
MONITOR/PROJECTOR HOLDER
54
356
WALL SUPPORT
54
190CCSB
SHORT COLUMN
53
357
SLIDING PLATE ADAPTOR
58
190XB
190 CLASSIC
21
357PLV
SLIDING PLATE
59
190LAA
LOW ANGLE ADAPTER FOR 190 RANGE
53
358
SURVEY PLATE ADAPTOR ACCESSORY PLATE
56
190MF3
MAGFIBER TRIPOD 3 SECTION
19
359
LONG LENS CAMERA SUPPORT
54
190MF4
MAGFIBER TRIPOD 4 SECTION
19
361
SHOULDER BRACE FOR MONOPOD
51
190XPROB
190 PRO
20
380
LEG WARMERS
55
59
190SCK2N
SUCTION CUP/RETRACTABLE SPIKE FEET
58
381
LEG WARMERS
55
190SPK2N
RUBBER/SPIKED FOOT STAINLESS STEEL
58
384
DOVE TAIL PLATE ADAPTOR
58
190TSB
TWO SECTION CENTER COLUMN FOR 190 RANGE
53
384PL
DOVE TAIL PLATE
59
74 photo
Description
Page
Art. N°
Description
Page
384PLARCH
DOVE TAIL ARCH. PLATE
59
676B
DIGI MONOPOD
50
385
AIR CUSHIONED TABLE CENTER POST
53
676SC2
SUCTION CUP/RETRACTABLE SPIKE FOOT
51
390RC2
JUNIOR HEAD BLACK
37
676SP2
RUBBER/SPIKE FOOT STAINLESS STEEL
51
393
LONG LENS MONOPOD BRACKET
51
677SCN
SUCTION CUP/RETRACTABLE SPIKE FOOT
51
394
PLATE ADAPTOR
58
677SPN
RUBBER/SPIKE FOOT
51
400
GEARED HEAD
32
678
UNIVERSAL FOLDING BASE
51
400PL
ACCESSORY PLATE
59
679B
MONOPOD
50
401N
QUICK ACTION STRAP
63
680B
COMPACT MONOPD
50
402
SHORT STRAP
62
681B
PROFESSIONAL MONOPOD
50
405
PRO GEARED HEAD
33
682B
SELF-STANDING PRO MONOPOD
50
410
JUNIOR GEARED HEAD
33
685
NEOTEC PRO PHOTO MONOPOD
50
410PL
ACCESSORY PLATE
59
694
MAGFIBER MONOPOD 4 SECTION
50
430
ACCESSORY LONG PLATE
55
695
MAGFIBER MONOPOD 5 SECTION
50
438
BALL CAMERA LEVELLER
49
695SC2
SUCTION CUP/RETRACTABLE SPIKE FOOT
51
439SCK2
SUCTION CUP/RETRACTABLE SPIKE FEET
58
695SP2
RUBBER/SPIKED FOOT STAINLESS STEEL
51
439SPK2
RUBBER SPIKE FOOT STAINLESS STEEL
58
700RC2
MINI VIDEO HEAD BLACK
37
440SCK2
SUCTION CUP/RETRACTABLE SPIKE FEET
58
701RC2
VIDEO HEAD
37
440SPK2
RUBBER/SPIKED FOOT STAINLESS STEEL
58
709B
DIGI TRIPOD BLACK
24
440STRAP
LONG STRAP
62
709BR
SILVER BRIGHT DIGI TABLE TRIPOD
24
441SCK2
SUCTION CUP/RETRACTABLE SPIKE FEET
58
715B
DIGI MINI TRIPOD WITH PERMANENT FRICTION BALL HEAD
25
441SPK2
RUBBER SPIKE FOOT STAINLESS STEEL
58
715SHB
DIGI MICRO TRIPOD WITH PERMANENT FRICTION BALL HEAD
25
441STRAP
SHORT STRAP
62
718B
DIGI TRIPOD WITH 3-WAY HEAD
24
449SC2
SUCTION CUP/RETRACTABLE SPIKE FEET
51
718SHB
DIGI TRIPOD WITH 3-WAY HEAD
24
449SP2
RUBBER SPIKE FOOT STAINLESS STEEL
51
725B
DIGI TRIPOD WITH BALL HEAD
23
454
MICRO POSITIONING PLATE
55
728B
DIGI TRIPOD WITH 3-WAY HEAD
23
458B
NEOTEC PRO PHOTO TRIPOD
16
785B
MODO MAXI TRIPOD
28
458HL
HAND A LONG
63
785BAG
MODO BAG
28
460MG
3D MAGNESIUM HEAD
36
785PL
PLATE
59
468MG
HYDROSTATIC BALL HEAD
39
785SHB
MODO MINI TRIPOD
28
50
468MGRC0
HYDROSTATIC BALL HEAD WITH RC0 RAPID CONNECT SYSTEM
39
790B
MODO MONOPOD
468MGRC2
HYDROSTATIC BALL HEAD WITH RC2 RAPID CONNECT SYSTEM
39
800
MINI SALON
10
468MGRC3
HYDROSTATIC BALL HEAD WITH RC3 RAPID CONNECT SYSTEM
39
804RC2
BASIC PAN TILT HEAD WITH QUICK RELEASE PLATE
35
468MGRC4
HYDROSTATIC BALL HEAD WITH RC4 RAPID CONNECT SYSTEM
39
806
MINI SALON 190
10
468MGRC5
HYDROSTATIC BALL HEAD WITH RC5 RAPID CONNECT SYSTEM
39
808RC4
STANDARD 3-WAY HEAD WITH QUICK RELEASE PLATE
34
475B
PRO GEARED TRIPOD
9
809
SALON 230
10
482
MICRO BALL HEAD
42
816
SUPER SALON 280
10
484
MINI BALL HEAD
42
816/1
SUPER SALON 230
10
484RC2
MINI BALL HEAD WITH RC2 RAPID CONNECT SYSTEM
42
820
45CM COLUMN EXTENSION
11
486
COMPACT BALL HEAD
42
822
LOW ANGLE ADAPTER ARM
11
486RC2
COMPACT BALL HEAD WITH RC2 RAPID CONNECT SYSTEM
42
824
90° ADDITIONAL REVOLVING HEAD
11
488
MIDI BALL HEAD
42
826
HORIZONTAL BRACKET WITH TWO CONNECTIONS
11
488RC0
MIDI BALL HEAD WITH RC0 RAPID CONNECT SYSTEM
42
828
HORIZONTAL BRACKET WITH TWO CONNECTIONS
11
488RC2
MIDI BALL HEAD WITH RC2 RAPID CONNECT SYSTEM
43
834
ADDITIONAL COUNTER-WEIGHT
11
488RC4
MIDI BALL HEAD WITH RC4 RAPID CONNECT SYSTEM
43
840
ADDITIONAL CAMERA MOUNT
11
490
MAXI BALL HEAD
43
842
90° CAMERA MOUNT
11
490RC4
MAXI BALL HEAD WITH RC4 RAPID CONNECT SYSTEM
43
844
UTILITY TRAY 29X29 CM
11
501PL
PLATE
59
MBAGD
MINI AIR BAG
61
540BB
BUCKET BACKPACK
63
MBAG70
UNPADDED TRIPOD BAG 70CM
61
553
LEVELING CENTER COLUMN ANGLE BRACKET
53
MBAG80
UNPADDED TRIPOD BAG 80CM
61
555B
LEVELING CENTER COLUMN
53
MBAG80P
PADDED TRIPOD BAG 80CM
61
556B
LEVELING CENTER COLUMN
53
MBAG90P
PADDED TRIPOD BAG 90CM
61
577
SLIDING PLATE ADAPTOR
58
MBAG100P
PADDED TRIPOD BAG 100CM
61
625
HEXAGONAL PLATE ADAPTOR
58
MBAG120P
PADDED TRIPOD BAG 120CM
61
627
BASIC PANORAMIC HEAD ADAPTER
49
WMANTOOL TOOL KIT
55
photo 75
INDEX
Art. N°
Lino Manfrotto + Co., S.p.A.
Via Sasso Rosso 19
I-36061 Bassano del Grappa (VI) Italia
Tel +39 0424 555 855
Fax +39 0424 808 999
www.manfrotto.com
Product photography: Roberto Bigano/Multistudio
Concept: Claim adv
© Gruppo Manfrotto 2006
Whilst every effort has been made to ensure that the information contained within this catalog is correct, Gruppo Manfrotto srl accepts no liability for errors or omissions. Technical specifications and data are provided for
guidance only. All rights are strictly reserved. Products shown in this catalog are protected by international patents, while copyng this publication (in whole or in part) without written consent from Gruppo Manfrotto srl is strictly
forbidden and punishable by law. Because we constantly aim to improve our products, we reserve the right to amend or alter at any time and without prior notice the specifications of any item detailed in this publication.
LNORD06,G - ISSUE NUMBER N°2 - 10/06
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising