Just The Facts Mini

Just The Facts Mini
A QUICK GUIDE to our COMPLETE LINE of
QUALITY REFRIGERATION PRODUCTS
Because energy savings is an ever-increasing concern, Master-Bilt strives to make our equipment as
efficient as possible. That’s why we initiated our
Energy Saver program to help you quickly identify
features that serve your efficiency needs.
Visit www.master-bilt.com/products/energy_saver.
htm for the latest on energy-saving features and
options.
TY
PA
YE
AR
OR
S & LAB
T
R
N
WAR RA
We’re confident in our equipment and we want
you to be also. That's why most Master-Bilt
self-contained cabinets are standard with a
three-year parts and labor warranty with an
additional two year compressor coverage.
Contact our service department at 800-684-8988
or [email protected] for more information.
1
Standard Textured Finish
Master-Bilt's textured finishes are designed to
increase visual appeal as well as help minimize
scratches and dents that occur over time. Most
standard Master-Bilt white or black cabinets
feature this finish.
Standard White
Optional Black
2
Fusion Plus™ Merchandisers.......................... 7
Glass Door Merchandisers............................ 10
Ice Cream & Gelato Cabinets....................... 16
Open Air Merchandisers............................... 25
Bakery & Deli Merchandisers........................ 29
Fusion™ Series............................................. 31
Master-Chill™ Series.................................... 47
Endura™ Specification Series........................ 53
Ice Merchandisers........................................ 65
Countertop Merchandisers........................... 66
Bilt2Spec™ Custom Walk-Ins........................ 67
Quick Ship Walk-ins...................................... 70
10-Bilt™ Walk-ins......................................... 73
Ready-Bilt™ Walk-ins.................................... 75
Refrigerated Warehouses.............................. 77
Kool Star® High Density Rail Walk-ins............ 79
Refrigeration Systems................................... 81
Master Controller Reverse Cycle Defrost....... 92
MBWA-1 Digital Alarm & Light System......... 97
Glass Sentry II Anti-Sweat Module................ 98
For the most up-to-date product information, visit
www.master-bilt.com/products.
3
CONTENTS
BLG/BMG Plus Merchandisers........................ 4
BLG/BMG PLUS MERCHANDISERS
BLG-HGP SERIES
Bottom Mounted
Full-Height Swing Glass Door
Freezer Merchandisers
BLG-48-HGP
MODEL
BLG-23-HGP
BLG-27-HGP
BLG-48-HGP
BLG-74-HGP
DIMENSIONS
(in.)
L
D*
H
27 321/4 79
30 321/4 79
52 321/4 79
78 321/4 79
VOLTS AMPS
115
7.5
115
7.5
115
12.3
115/
12.8
208-230**
UNIT
H.P.
1/2
1/2
3/4
1
CAP.
CU.
FT.
22.1
25.0
45.7
70.2
*Includes door handle & rear drainline cover.
**208-230/60/1 also requires neutral and safety ground wire.
Remote refrigeration options available.
4
Bottom Mounted
Full-Height Swing Glass Door
Refrigerator Merchandisers
BMG-74-HGP
MODEL
BMG-23-HGP
BMG-27-HGP
BMG-48-HGP
BMG-74-HGP
DIMENSIONS
(in.)
L
D*
H
27 321/4 79
30 321/4 79
52 321/4 79
78 321/4 79
VOLTS
115
115
115
115
AMPS
4.5
4.5
6.9
7.7
UNIT
H.P.
1/5
1/5
1/3
1/2
CAP.
CU.
FT.
22.1
25.0
45.7
70.2
*Includes door handle & rear drainline cover.
Remote refrigeration options available.
5
BLG/BMG PLUS MERCHANDISERS
BMG-HGP SERIES
BLG/BMG PLUS MERCHANDISERS
BMG-SLP SERIES
Bottom Mounted
Full-Height Slide Glass Door
Refrigerator Merchandisers
BMG-48-SLP
DIMENSIONS
CAP.
(in.)
UNIT CU.
MODEL
L
D*
H VOLTS AMPS H.P. FT.
BMG-48-SLP 52 31
79
115
6.9
1/3 45.7
BMG-74-SLP 78 31
79
115
7.7
1/2 70.2
*Includes rear drainline cover.
Remote refrigeration options available.
6
Bottom Mounted Swing Glass
Door Freezer Merchandisers
With Lighted Sign
MBGFP74-HG
MODEL
MBGFP23-HG
MBGFP27-HG
MBGFP48-HG
MBGFP74-HG
DIMENSIONS
(in.)
L
D*
H
27 321/4 79
30 321/4 79
52 321/4 79
78 321/4 79
UNIT
VOLTS AMPS H.P.
115
7.5 1/2
115
7.5 1/2
115
12.3 3/4
115/
12.8
1
208-230**
CAP.
CU.
FT.
22.1
25.0
45.7
70.2
*Includes door handle & rear drainline cover.
**208-230/60/1 also requires neutral and safety ground wire.
7
FUSION PLUS™ MERCHANDISERS
MBGFP-HG SERIES
FUSION PLUS™ MERCHANDISERS
MBGRP-HG SERIES
Bottom Mounted Swing Glass Door
Refrigerator Merchandisers
With Lighted Sign
MBGRP48-HG
MODEL
MBGRP23-HG
MBGRP27-HG
MBGRP48-HG
MBGRP74-HG
DIMENSIONS
CAP.
(in.)
UNIT CU.
L
D*
H VOLTS AMPS H.P. FT.
27 321/4 79 115
4.5
1/5 22.1
30 321/4 79 115
4.5
1/5 25.0
52 321/4 79 115
6.9
1/3 45.7
78 321/4 79 115
7.7
1/2 70.2
*Includes door handle & rear drainline cover.
8
Bottom Mounted Slide Glass Door
Refrigerator Merchandisers
With Lighted Sign
MBGRP48-SL
MODEL
MBGRP48-SL
MBGRP74-SL
DIMENSIONS
CAP.
(in.)
UNIT CU.
L D* H VOLTS AMPS H.P. FT.
52 31 79
115
6.9
1/3 45.7
78 31 79
115
7.7
1/2 70.2
*Includes rear drainline cover.
9
FUSION PLUS™ MERCHANDISERS
MBGRP-SL SERIES
GLASS DOOR MERCHANDISERS
BGR-15 SERIES
Bottom Mounted Glass Door
Refrigerator
BGR-15
MODEL
BGR-15
DIMENSIONS
CAP.
(in.)
UNIT CU.
L
D
H VOLTS AMPS H.P. FT.
5.7
1/5 11.5
25
24 751/2 115
10
With 32 basic modules in medium and low
temp and a choice of 24- or 30-inch wide
doors, TEM/TEL Series endless merchandisers
are designed to fit most any space requirement.
They can be used as stand-alone models or
combined for a continuous line up.
Endless merchandisers are available with
either a top-mount remote or self-contained
refrigeration system depending on the sales
space requirements.
Remote systems reduce heat and noise on
the sales floor and are usually preferred in areas
where roof installation is no problem.
Endless SC models offer a self-contained
refrigeration system for quick and easy installation in areas where space is limited and roof
access isn't practical.
11
GLASS DOOR MERCHANDISERS
Endless Advantages
GLASS DOOR MERCHANDISERS
No matter the choice, endless merchandisers
offer distinct advantages:
Standard LED
lighting uses
less energy and
lasts longer
than fluorescent
bulbs. Higher
quality LED
lighting also
increases visual
appeal for
products.
Standard 63" tall doors
provide a 61" vertical
product viewing area.
12
GLASS DOOR MERCHANDISERS
Five durable,
two-position
cantilever
shelves per door
for maximum
merchandising
flexibility. Each
shelf holds up to
135 lbs.
Bottom support
rails designed
to allow forklift
access from the
sides or back.
Trim pieces on
each end may
be provided in
black, white or
stainless steel.
13
GLASS DOOR MERCHANDISERS
TEM/TEL SERIES
Endless Merchandisers With Remote
Refrigeration Systems
TEL-4-24
Evaporator coils are top mounted inside the
cabinet and feature heavy-duty copper tubing as
well as a pre-mounted expansion valve. Electric
defrost is standard on low temp models.
Remote refrigeration
systems also include a
condensing unit with all
necessary components
supplied for installation
including a solenoid
valve.
14
Endless Merchandisers With
Self-Contained Refrigeration Systems
TEL-4-30SC
The condensing unit is
covered with a sound
dampening fiberglass
mat.
A standard 20" tall steel
shroud provided by
Master-Bilt covers all
components.
TEM/TEL-SC refrigeration systems are precharged with quick connect fittings and flexible
hoses for easy connection and installation.
A condensate vaporizer and condensate
pump are provided for simple elimination of
condensate. No plumbing is required.
15
GLASS DOOR MERCHANDISERS
TEM/TEL-SC SERIES
ICE CREAM & GELATO CABINETS
COLDIN-3™ SERIES
Display Freezers
MSF-43A
MSC-49A
DIMENSIONS
(in.)
MODEL
L
FLAT LID
MSF-31A
31
MSF-43A
43
MSF-52A
52
MSF-71A
71
CURVED LID
MSC-31A 31
MSC-41A 41
MSC-49A 49
MSC-66A 661/2
UNIT CAP.
VOLTS AMPS H.P. CU. FT.
D
H
27
27
27
27
33
33
33
33
115
115
115
115
2.0
3.5
3.5
6.0
1/3
1/3
1/3
2/3
6.0
9.0
11.5
16.5
273/8
273/8
273/8
273/8
331/2
331/2
331/2
331/2
115
115
115
115
2.3
1.9
1.9
5.5
1/3
3/8
3/8
3/4
6.0
8.5
10.5
15.3
16
Conventional Ice Cream
Storage/Dipping Cabinets
DC-8D
DIMENSIONS (in.)
MODEL
DC-2S
DC-4S
DC-4D
DC-6D
DC-8D
DC-10D
DC-12D
L
317/8
54
30 5/8
43
54
665/8
845/8
D
211/8
211/8
301/8
301/8
301/8
301/8
301/8
H VOLTS AMPS
341/8 115
5.7
341/8 115
5.7
341/8 115
5.7
341/8 115
5.7
341/8 115
7.3
341/8 115
7.3
341/8 115
7.5
CAPACITY
UNIT DISPLAY/
H.P. STORAGE**
1/4
3/1
1/4
6/4
1/4
5/2
1/4
8/5
1/3
11/8
1/3
14/11
1/3*
18/15
*Semi-hermetic compresssor.
**Capacity measured in 91/2" diameter, 3 gallon cans.
Stainless steel exterior option available.
17
ICE CREAM & GELATO CABINETS
DC SERIES
ICE CREAM & GELATO CABINETS
DD/DD-CG/DD-L SERIES
Deluxe Ice Cream Dipping/Display
Merchandisers
DD-46
DD-46L
DIMENSIONS
(in.)
MODEL
L
DD-26
261/2
DD-46
473/4
DD-66
69 1/4
DD-88
903/4
D
273/4
273/4
273/4
273/4
H VOLTS AMPS
*
115
7.4
*
115
7.5
*
115
9.7
*
115 11.5
CAPACITY
UNIT DISPLAY/
H.P. STORAGE**
1/3
4/0
1/2
8/4
1/2
12/8
3/4
16/12
*Height of standard and “L” low glass models: 50",
“CG” c urved glass models: 52"
**Capacity measured in 91/2" diameter, 3 gal. cans.
18
Low Curved Glass Deluxe Ice Cream
Dipping/Display Merchandisers
DD-46LCG
DIMENSIONS
(in.)
MODEL
L
D
H VOLTS AMPS
7.5
DD-46LCG 473/4 273/4 50 115
DD-66LCG 69 1/4 273/4 50 115
9.7
DD-88LCG 903/4 273/4 50 115 11.5
CAPACITY
UNIT DISPLAY/
H.P. STORAGE**
1/2
8/4
1/2
12/8
3/4
16/12
**Capacity measured in 91/2" diameter, 3 gal. cans.
19
ICE CREAM & GELATO CABINETS
DD-LCG SERIES
ICE CREAM & GELATO CABINETS
FIP-40/FIP-50 SERIES
Ice Cream And Novelty
Display Merchandisers
FIP-40
FIP-50
MODEL
FIP-40
FIP-50
DIMENSIONS
CAP.
(in.)
UNIT CU.
L
D
H
VOLTS AMPS H.P. FT.
40
31 503/16
115
7.5
3/4 11.8
60
31
50
115
13.4
3/4 18.1
20
Flavorail
Ice Cream Dipping Cabinets
FLR-80
Note: Standard Flavorail cabinets do not include
optional pumps and jars.
DIMENSIONS
(in.)
MODEL
FLR-60
FLR-80
L
43
54
D
301/8
301/8
H
381/4
381/4
CAPACITY
UNIT DISPLAY/
VOLTS AMPS H.P. STORAGE*
115
7.5 1/4
5/7
115
7.5 1/3
6/11
*Capacity measured in 91/2" diameter, 3 gallon cans.
Stainless steel exterior option available.
21
ICE CREAM & GELATO CABINETS
FLR SERIES
ICE CREAM & GELATO CABINETS
GT SERIES
Ice Cream And Novelty
Display Merchandisers
GT-60
DIMENSIONS
(in.)
L
D
H VOLTS AMPS
MODEL
GT-60
725/16 323/16 393/8 115
10.3
12.0
GT-80
9515/16 323/16 393/8 115
22
CAP.
UNIT CU.
H.P. FT.
3/4 17.4
3/4 25.5
ICE CREAM & GELATO CABINETS
IHC SERIES
Ice Cream Hardening And
Holding Cabinets
IHC-48
DIMENSIONS
(in.)
MODEL L
IHC-27 31
IHC-48 52
D
36
36
H*
82
82
UNIT
VOLTS** AMPS H.P.
208-230 7.4
1
208-230 11.5 11/2
CAPACITY
3 GAL.
CANS
20
43
*Height includes 6"-7" adjustable legs.
**IHC models operate on a minimum of 208 volts. A voltage boosting transformer (part no. 39-01087) must be
used when the supply voltage is less than 208 volts.
Remote refrigeration option available on
IHC-48 model.
23
ICE CREAM & GELATO CABINETS
GEL SERIES
Gelato Merchandisers
GEL-12
DIMENSIONS
(in.)
MODEL
L
GEL-6
465/16
GEL-9 6515/16
GEL-12 851/2
CAP.
UNIT 5 LITER
D
H VOLTS* AMPS** H.P. PANS†
441/2 533/8 208-230 9.0
1
24
441/2 533/8 208-230 13.1
***
36
441/2 533/8 208-230 13.8
***
48
*Note: 208-230/60/1 also requires neutral and safety
ground wire.
**Electric condensate evaporator pan requires a
dedicated 15 amp, 120 volt circuit.
***Refrigeration system contains two 1 HP compressors.
†Half of pans on top level, half on lower storage layer.
24
OPEN AIR MERCHANDISERS
HOAM SERIES
Horizontal Open Air
Merchandisers
HOAM72
DIMENSIONS
(in.)
MODEL
HOAM36
HOAM48
HOAM60
HOAM72
L
D
H
351/2
471/2
591/2
711/2
34
34
34
34
46
46
46
46
UNIT CAP.
VOLTS AMPS* H.P. CU. FT.
115
8.0
1/2
4.6
115
8.0
1/2
6.3
115
11.5 3/4
7.9
115
11.5 3/4
9.6
*Factory installed condensate evaporator pan requires a
dedicated 15 amp, 120 volt circuit.
Remote refrigeration options available.
25
OPEN AIR MERCHANDISERS
VOAM-60 SERIES
Vertical Open Air Merchandisers
60" Height
VOAM-C MODELS
WITH ROLL-DOWN
SECURITY COVERS
SIZE
REPLACE WITH
PICTURE
DOWN
VOAM36-60
VOAM36-60C
DIMENSIONS
(in.)
MODEL
VOAM36-60/-60C
VOAM48-60/-60C
VOAM60-60/-60C
VOAM72-60/-60C
L
D
H
351/2
471/2
591/2
711/2
34
34
34
34
60
60
60
60
CAP.
UNIT CU.
VOLTS AMPS* H.P. FT.
115
8.0
1/2 13.4
115
11.5 3/4 18.2
115
14.5
1 23.1
115
14.5
1 28.0
*Factory installed condensate evaporator pan requires a
dedicated 15 amp, 120 volt circuit.
Remote refrigeration options available.
26
Vertical Open Air Merchandisers
72" Height
VOAM-C MODELS
WITH ROLL-DOWN
SECURITY COVERS
SIZE
REPLACE WITH
PICTURE
DOWN
VOAM60-72
DIMENSIONS
(in.)
MODEL
VOAM36-72/-72C
VOAM48-72/-72C
VOAM60-72/-72C
VOAM72-72/-72C
OPEN AIR MERCHANDISERS
VOAM-72 SERIES
L
D
H
351/2
471/2
591/2
711/2
34
34
34
34
72
72
72
72
VOAM36-72C
CAP.
UNIT CU.
VOLTS AMPS* H.P. FT.
115
11.5 3/4 17.8
115
14.5
1 24.2
208-230 7.8
1 30.7
208-230 7.8
1 37.1
*Factory installed condensate evaporator pan requires a
dedicated 15 amp, 120 volt circuit. Note: 208-230/60/1
also requires neutral and safety ground wire.
Remote refrigeration options available.
27
OPEN AIR MERCHANDISERS
VOAM-79 SERIES
Vertical Open Air Merchandisers
79" Height
VOAM-C MODELS
WITH ROLL-DOWN
SECURITY COVERS
SIZE
REPLACE WITH
PICTURE
DOWN
VOAM48-79
VOAM36-79C
DIMENSIONS
(in.)
MODEL
VOAM36-79/-79C
VOAM48-79/-79C
VOAM60-79/-79C
VOAM72-79/-79C
L
351/2
471/2
591/2
711/2
D H
34
34
34
34
79
79
79
79
CAP.
UNIT CU.
VOLTS AMPS* H.P. FT.
115
11.5
3/4 20.8
115
14.5
1 28.3
208-230 7.8
1 35.9
208-230 7.8
1 43.4
*Factory installed condensate evaporator pan requires a
dedicated 15 amp, 120 volt circuit. Note: 208-230/60/1
also requires neutral and safety ground wire.
Remote refrigeration options available.
28
Curved Glass
Bakery & Deli Merchandisers
CGB-50
CGD-59
DIMENSIONS
(in.)
MODEL
L
D
H
BAKERY MERCHANDISERS
CGB-50 501/8 35 487/16
CGB-59 591/8 35 487/16
CGB-77 771/8 35 487/16
DISPLAY
UNIT AREA
VOLTS AMPS H.P. CU. FT.
DELI MERCHANDISERS
CGD-50 501/8 35 487/16
CGD-59 591/8 35 487/16
CGD-77 771/8 35 487/16
29
115
115
115
10.5 1/2
11.6 1/2
14.2 3/4
20.8
24.5
32.0
115
115
115
10.5 1/2
11.6 1/2
14.2 3/4
20.8
24.5
32.0
BAKERY & DELI MERCHANDISERS
CGB/CGD SERIES
BAKERY & DELI MERCHANDISERS
CGB-NR SERIES
Non-Refrigerated Curved Glass
Bakery Merchandisers
CGB-50NR
DIMENSIONS
(in.)
MODEL
L
CGB-50NR 501/8
CGB-59NR 591/8
CGB-77NR 771/8
D
35
35
35
H
487/16
487/16
487/16
30
DISPLAY
AREA
VOLTS AMPS CU. FT.
1.5
115
20.8
1.5
115
24.5
1.5
115
32.0
Bottom Mounted Solid Door
MBR/MBF-SH
Reach-Ins
MODELS WITH
HALF DOORS
MBF/MBR49-SH
MBF/MBR49-S
DIMENSIONS (in.)
MODEL
L
D
H*
REFRIGERATORS
MBR23-S/-SH 271/2 33 833/4
MBR49-S/-SH 551/4 33 833/4
MBR72-S/-SH 78 33 833/4
CAP.
UNIT CU.
VOLTS AMPS H.P. FT.
115
115
115
FREEZERS
MBF23-S/-SH 271/2 33 833/4
115
MBF49-S/-SH 551/4 33 833/4
115
MBF72-S/-SH 78 33 833/4 115/208230**
7.5 3/8 23.0
7.5 3/8 49.0
10.0 1/2 70.0
8.5
9.5
9.0
1/2 23.0
3/4 49.0
1.1 70.0
*Depth includes door handle, height includes casters.
**208-230/60/1 also requires neutral and safety
ground wire.
31
FUSION™ SERIES
MBF/MBR SERIES
FUSION™ SERIES
MBF/MBR SERIES
Bottom Mounted Solid Door
Reach-Ins
MBR49-G
DIMENSIONS (in.)
UNIT
MODEL
L
D
H* VOLTS AMPS H.P.
MBR23-G 273/8 327/8 833/4 115
5.0 3/8
MBR49-G 551/4 327/8 833/4 115
6.8 3/5
MBR72-G 78 327/8 833/4 115
7.6 3/5
CAP.
CU. FT.
23.0
49.0
70.0
*Depth includes door handle, height includes casters.
32
FUSION™ SERIES
MBGR SERIES
Bottom Mounted Glass Door
Refrigerators
MBGR26H
MBGR48S
MBGR70H
DIMENSIONS
(in.)
MODEL
L
D*
H VOLTS AMPS
SWINGING DOOR
115 3.9
MBGR26H 281/2 331/4 79
MBGR70H
78
33 791/2 115 11.9
SLIDING DOOR
MBGR48S 531/4 303/4 783/4 115 10.0
*Depth includes door handle.
33
UNIT CAP.
H.P. CU. FT.
1/3
3/5
24.0
72.0
1/2
48.0
FUSION™ SERIES
MBCTM SERIES
Countertop Merchandisers
(MBCTM7-B model)
MBCTM7-B
MBCTM4-F
DIMENSIONS (in.)
MODEL
L
D
REFRIGERATOR
MBCTM7-B 203/8 243/8
H
361/2
FREEZER
MBCTM4-F 235/8 24* 311/8**
UNIT CAP.
VOLTS AMPS H.P. CU. FT.
115
2.1
1/10
6.35
115
3.5
1/4
3.6
*Depth includes door handle. **Height includes legs.
34
FUSION™ SERIES
MBPT SERIES
Pizza Prep Units
MBPT67
DIMENSIONS
(in.)
MODEL
MBPT44
MBPT67
MBPT93
L
D*
H**
443/8 361/2 427/8
67 361/2 427/8
931/4 361/2 427/8
UNIT
VOLTS AMPS H.P.
115
6.5 3/8
115
6.5 3/8
115
7.5 1/2
*Depth includes cutting board.
**Height includes casters.
Overshelf and refrigerated drawer
options available, see page 39.
35
CAP.
CU. FT.
9.7
17.8
27.2
FUSION™ SERIES
MBSP SERIES
Sandwich/Salad Prep Units
MBSP72-18
DIMENSIONS
(in.)
MODEL
MBSP27-8
MBSP36-10
MBSP48-12
MBSP60-16
MBSP72-18
L
271/2
363/8
481/4
603/8
723/8
D
30
30
30
30
30
H* VOLTS AMPS
421/2 115 3.2
421/2 115 3.6
421/2 115 7.9
421/2 115 7.9
421/2 115 9.9
UNIT
H.P.
1/5
1/5
3/8
3/8
3/8
*Height includes casters.
Overshelf and refrigerated drawer
options available, see page 39.
36
CAP.
CU. FT.
6.8
9.4
12.7
16.0
19.6
FUSION™ SERIES
MBSMP SERIES
Mega Top Sandwich/Salad
Prep Units
MBSMP48-18
DIMENSIONS
(in.)
MODEL
MBSMP27-12
MBSMP36-15
MBSMP48-18
MBSMP60-24
MBSMP72-30
L
271/2
363/8
481/4
603/8
723/8
D*
351/4
351/4
351/4
351/4
351/4
H** VOLTS AMPS
441/8 115 3.2
441/8 115 3.6
441/8 115 7.9
441/8 115 7.9
441/8 115 9.9
UNIT
H.P.
1/5
1/5
3/8
3/8
3/8
*Depth includes cutting board.
**Height includes casters.
Overshelf and refrigerated drawer
options available, see page 39.
37
CAP.
CU. FT.
6.8
9.4
12.7
16.0
19.6
FUSION™ SERIES
MBU SERIES
Undercounter Refrigerators
& Freezers
MBUF/MBUR60
Applies to MBUR models with doors only.
DIMENSIONS (in.)
MODEL
L
REFRIGERATORS
MBUR27 271/2
MBUR36 363/8
MBUR48 481/4
MBUR60 603/8
MBUR72 723/8
FREEZERS
MBUF27 271/2
MBUF48 481/4
MBUF60 603/8
UNIT CAP.
AMPS H.P. CU. FT.
D
H*
VOLTS
30
30
30
30
30
357/8
357/8
357/8
357/8
357/8
115
115
115
115
115
3.2
3.6
7.9
7.9
8.1
1/5
1/5
3/8
3/8
3/8
7.0
9.4
13.0
16.5
20.0
30
30
30
357/8
357/8
357/8
115
115
115
8.3
8.9
8.9
3/8
1/2
1/2
7.0
13.0
16.5
*Height includes casters.
Overshelf options available on all models.
Refrigerated drawer options available on
MBUR models, see page 39.
38
MBSMP48-18
with double
cantilever
overshelves
and refrigerated drawers.
Add convenience to your prep table or
undercounter with stainless steel overshelves
or refrigerated drawers. Single and double
overshelves are available on prep units and
undercounters, while a wide variety of drawer
configurations are available on prep units and
undercounter refrigerators. For more on these
options, visit www.master-bilt.com/products/
fusion.htm.
39
FUSION™ SERIES
Overshelf &
Refrigerated Drawer
Options
FUSION™ SERIES
MBCB SERIES
Chef Bases
MBCB72
DIMENSIONS
(in.)
MODEL
L
MBCB36 36
MBCB48 48
MBCB53 53
MBCB60 60
MBCB72 72
MBCB84 84
MBCB96 961/16
D
31
31
31
31
31
31
31
H* VOLTS AMPS
251/2 115 3.3
251/2 115 3.3
251/2 115 3.3
251/2 115 3.3
251/2 115 3.3
251/2 115 6.0
251/2 115 6.0
*Height includes casters.
40
UNIT NO. OF
H.P. DRAWERS
1/5
2
1/5
2
1/5
2
1/5
2
1/5
4
3/8
4
3/8
4
Solid Door Backbar Refrigerators
MBBB79
DIMENSIONS
(in.)
MODEL
L
MBBB59 59
MBBB69 691/8
MBBB79 803/4
MBBB95 951/4
D
287/8
287/8
287/8
287/8
UNIT
H VOLTS AMPS H.P.
37 115
6.3 3/8
37 115
6.3 3/8
37 115
6.3 3/8
37 115
6.3 3/8
CAPACITY
12 OZ.
CANS/
12 OZ.
BOTTLES
1084/498
1299/594
1566/714
1875/858
Doors are field interchangeable from
solid to glass.
41
FUSION™ SERIES
MBBB SERIES
FUSION™ SERIES
MBBB-G SERIES
Glass Door Backbar Refrigerators
MBBB59-G
DIMENSIONS
(in.)
MODEL
L
MBBB59-G 59
MBBB69-G 691/8
MBBB79-G 803/4
MBBB95-G 951/4
D
281/4
281/4
281/4
281/4
UNIT
H VOLTS AMPS H.P.
37 115
6.3 3/8
37 115
6.3 3/8
37 115
6.3 3/8
37 115
6.3 3/8
CAPACITY
12 OZ.
CANS/
12 OZ.
BOTTLES
1084/498
1299/594
1566/714
1875/858
Doors are field interchangeable from
glass to solid.
42
FUSION™ SERIES
MBBB-N SERIES
Shallow Depth Solid Door
Backbar Refrigerators
MBBB60N
DIMENSIONS
(in.)
MODEL
L
MBBB48N 481/8
MBBB60N 601/8
MBBB72N 721/8
UNIT
D
H VOLTS AMPS H.P.
26 353/8 115
6.3 3/8
26 353/8 115
6.3 3/8
26 353/8 115
6.3 3/8
CAPACITY
12 OZ.
CANS/
12 OZ.
BOTTLES
714/336
966/468
1218/588
Doors are field interchangeable from
solid to glass.
43
FUSION™ SERIES
MBBB-NG SERIES
Shallow Depth Glass Door
Backbar Refrigerators
MBBB72NG
DIMENSIONS
(in.)
MODEL
L
MBBB48NG 481/8
MBBB60NG 601/8
MBBB72NG 721/8
UNIT
D
H VOLTS AMPS H.P.
26 353/8 115
6.3 3/8
26 353/8 115
6.3 3/8
26 353/8 115
6.3 3/8
CAPACITY
12 OZ.
CANS/
12 OZ.
BOTTLES
714/336
966/468
1218/588
Doors are field interchangeable from
glass to solid.
44
FUSION™ SERIES
MBBC SERIES
Horizontal Deep Well
Bottle Coolers
MBBC50
DIMENSIONS
(in.)
MODEL
L
MBBC50 50
MBBC65 641/2
MBBC80 801/2
MBBC95 95
D
261/2
261/2
261/2
261/2
H* VOLTS AMPS
331/2 115 6.1
331/2 115 6.1
331/2 115 6.1
331/2 115 6.1
45
UNIT
H.P.
3/8
3/8
3/8
3/8
CAPACITY
12 OZ.
CANS/
12 OZ.
BOTTLES
857/377
1191/539
1575/715
1893/877
FUSION™ SERIES
MBDD SERIES
Direct Draw Beer Coolers
MBDD59
MBDD24
(standard with casters)
DIMENSIONS (in.)
MODEL
L
MBDD24 233/8
MBDD59 59
MBDD69 691/8
MBDD79 803/4
D
303/4
291/8
291/8
291/8
MBDD95 951/4 291/8
UNIT NO. OF
H* VOLTS AMPS H.P. TOWERS
493/4 115
3.3 1/5 1 single tap
493/4 115
6.3 3/8 2 single tap
493/4 115
6.3 3/8 2 single tap
493/4 115
6.3 3/8 1 single,
1 double
tap
493/4 115
6.3 3/8 2 double
tap
*Height includes draft towers.
46
MASTER-CHILL™ SERIES
MASTER-CHILL
Undercounter Blast Chiller &
Blast Chiller/Freezer
MBC40-4A/
MBCF48/28-4A
DIMENSIONS (in.)
MODEL
L
D
H*
VOLTS/
UNIT
HZ/PH AMPS H.P.
BLAST CHILLER
MBC40-4A
293/8
2815/16 381/4 220/60/1
7.0
1/2
7.5
1
BLAST CHILLER/FREEZER
MBCF48/28-4A
293/8
2815/16 381/4 220/60/1
*Height includes legs.
LBS. OF PRODUCT
FROM 194°F - 37°F
MODEL
IN 90 MIN.
MBC40-4A
48
MBCF48/28-4A
48
47
LBS. OF PRODUCT
FROM 194°F - 0°F IN
240 MIN.
N/A
28
MASTER-CHILL™ SERIES
MASTER-CHILL
Reach-In Blast Chillers &
Blast Chiller/Freezers
MBC80-8A
MBCF115/55-16A
DIMENSIONS (in.)
MODEL
L
D
H*
VOLTS/
UNIT
HZ/PH AMPS H.P.
BLAST CHILLERS
MBC80-8A
311/2 331/8 745/8 220/60/3
7.5
21/2
MBC113-16A
4015/16 397/8
8.5
21/2
78
220/60/3
BLAST CHILLER/FREEZERS
MBCF99/59-8A
311/2 331/8 745/8 220/60/3 12.5
3
MBCF115/55-16A
4015/16 397/8
78
220/60/3 14.0
3
MBCF220/110-16A 4015/16 397/8
78
220/60/3 17.5 51/2
*Height includes legs.
MODEL
MBC80-8A
MBC113-16A
MBCF99/59-8A
MBCF115/55-16A
MBCF220/110-16A
LBS. OF PRODUCT
FROM 194°F - 37°F
IN 90 MIN.
80
113
99
LBS. OF PRODUCT
FROM 194°F - 0°F
IN 240 MIN.
N/A
N/A
59
114
55
220
110
48
Low Profile Blast Chiller/Freezer
MBCF35/22-5A
DIMENSIONS (in.) VOLTS/
UNIT
MODEL
L
D
H*
HZ/PH AMPS H.P.
MBCF35/22-5A 369/16 3013/16 327/16 220/60/1 7.5
1
*Height includes legs.
LBS. OF PRODUCT
LBS. OF PRODUCT
FROM 194°F - 37°F IN FROM 194°F - 0°F IN
MODEL
90 MIN.
240 MIN.
22
MBCF35/22-5A
35
49
MASTER-CHILL™ SERIES
MASTER-CHILL
MASTER-CHILL™ SERIES
Exclusive F.I.C. Technology
Master-Chill undercounter, reach-in and low
profile models feature patented Food Identification Controller (F.I.C.) technology. The F.I.C.
automatically adjusts blast chilling and freezing
cycles with its single multi-sensor probe. The
F.I.C. monitors temperatures in the core, beneath
and on the surface, preventing surface freezing
and degradation as well as preserving nutritional
values of the food.
50
Poor cooling techniques are a major cause of
foodborne illness. To avoid contamination, food
must be cooled through the danger zone of
140°F to 40°F in less than four hours. Master-Chill
MCR-33 models can blast through this range in
as little as 80 minutes depending on food density,
input temperature and refrigeration size. This rapid chilling also retains food quality, extends shelf
life and saves labor by reducing food preparation
time. A standard microprocessor control unit with
LED readouts provides continuous and accurate
temperature monitoring. The internal food temperature is detected by probes so you know for
sure when food is out of the danger zone.
Master-Chill
MCR-33 models
are equipped with
flush-mounted
walk-in style doors.
51
MASTER-CHILL™ SERIES
MASTER-CHILL
Roll-In & Pass-Thru Blast Chillers
MASTER-CHILL™ SERIES
Standard stainless steel
pan racks are capable of
holding 260 lbs. of food.
Full length
vertical fans
in Master-Chill
blast chillers
provide evenly
distributed
cooling. Probes
are supplied
for monitoring
internal food
temperatures.
52
Top Mounted Solid Door Reach-Ins
MNR/MNF522
DIMENSIONS (in.)
MODEL L
D
REFRIGERATORS
H*
VOLTS AMPS
UNIT CAP.
H.P. CU. FT.
MNR241 271/2 351/8 811/2
MNR522 55 351/8 811/2
MNR803 821/2 351/8 811/2
FREEZERS
115
115
115
4.9
8.0
9.1
1/4
1/3
1/2
24.0
51.9
79.9
MNF241 271/2 351/8 811/2
MNF522 55 351/8 811/2
MNF803 821/2 351/8 811/2
115
115
115
9.7
12.4
13.8
1/2
3/4
1
24.0
51.9
79.9
*Height includes casters.
Half door options available.
Remote refrigeration options available.
53
ENDURA™ SPECIFICATION SERIES
MNR/MNF SERIES
ENDURA™ SPECIFICATION SERIES
MNR SERIES
Top Mounted Glass Door
Reach-In Refrigerators
MNR522SSG
DIMENSIONS
(in.)
UNIT
MODEL
L
D
H*
VOLTS AMPS H.P.
MNR241SSG 271/2 351/2 811/2 115
8.6 1/3
MNR522SSG 55 351/2 811/2 115
10.7 1/2
MNR803SSG 821/2 351/2 811/2 115
8.3 3/4
*Height includes casters.
Half glass door options available.
54
CAP.
CU. FT.
24.0
51.9
79.9
ENDURA™ SPECIFICATION SERIES
MPR SERIES
Pass-Thru Refrigerators
MPR524
DIMENSIONS
(in.)
MODEL
L
D
H*
MPR242 271/2 381/4 811/2
MPR524 55 381/4 811/2
MPR806 821/2 381/4 811/2
VOLTS
115
115
115
AMPS
4.7
10.5
9.3
UNIT
H.P.
1/4
1/2
1/2
CAP.
CU. FT.
25.6
55.7
85.8
*Height includes casters.
Full glass and half door options available.
55
ENDURA™ SPECIFICATION SERIES
MWR SERIES
Roll-In Refrigerators
MWR722
DIMENSIONS
(in.)
MODEL
MWR331
MWR722
UNIT
L
D
H*
VOLTS AMPS H.P.
313/4 361/8 843/4 115
7.7 1/3
11.8 1/2
631/2 361/8 843/4 115
56
CAP.
CU. FT.
34.2
73.4
ENDURA™ SPECIFICATION SERIES
MPWR SERIES
Roll-Thru Refrigerators
MPWR332
DIMENSIONS
(in.)
MODEL
L
D
H*
MPWR332 313/4 393/8 843/4
MPWR724 631/2 393/8 843/4
UNIT CAP.
VOLTS* AMPS H.P. CU. FT.
115
7.7 1/3
115/
208-230 10.4 3/4
33.0
72.0
*MPWR724 operates on a minimum of 208 volts. A voltage boosting transformer (part no. 39-01087) must be
used when the supply voltage is less than 208 volts. 57
ENDURA™ SPECIFICATION SERIES
MNW SERIES
Heated Reach-Ins
MNW482
DIMENSIONS
(in.)
HEATER
CAP.
MODEL
L
D
H* VOLTS** AMPS WATTAGE CU. FT.
MNW211 271/2 351/8 811/2
115
12.5
1500
22.5
MNW482 55 351/8 811/2 208-230 13.7
3000
48.8
*Height includes casters.
**MNW482 operates on a minimum of 208 volts. A
voltage boosting transformer (part no. 39-01087) must be used when the supply voltage is less than 208 volts. 58
ENDURA™ SPECIFICATION SERIES
MPW SERIES
Heated Pass-Thrus
MPW554
DIMENSIONS
(in.)
MODEL
L
D
HEATER
CAP.
H* VOLTS** AMPS WATTAGE CU. FT.
MPW252 271/2 381/4 811/2
1500
25.6
MPW554
3000
55.7
55
115
12.5
115/
381/4 823/4 208-230 13.7
*Height includes casters or legs.
**MPW554 operates on a minimum of 208 volts. A
voltage boosting transformer (part no. 39-01087) must be used when the supply voltage is less than 208 volts.
Half solid door options available.
59
ENDURA™ SPECIFICATION SERIES
MPWW SERIES
Heated Roll-Thrus
MPWW332
DIMENSIONS
(in.)
MODEL
L
D
H*
MPWW332 313/4 391/4 843/4
HEATER
CAP.
VOLTS* AMPS WATTAGE CU. FT.
12.5
1500
36.4
115/
MPWW724 631/2 391/4 843/4 208-230 15.2
115
3000
78.1
*MPWW724 operates on a minimum of 208 volts. A voltage boosting transformer (part no. 39-01087) must be
used when the supply voltage is less than 208 volts. 60
Refrigerated Prep Units
MRR152 (shown with optional refrigerated drawers)
DIMENSIONS
(in.)
MODEL
MRR152
MRR192
MRR243
MRR283
MRR324
L
473/4
593/4
713/4
833/4
953/4
D*
38
38
38
38
38
UNIT
H** VOLTS AMPS H.P.
431/2 115
9.1 1/4
431/2 115
8.5 1/4
431/2 115
8.8 1/3
431/2 115
8.8 1/3
431/2 115
8.8 1/3
*Depth includes cutting board.
**Height includes casters.
61
CAP.
CU. FT.
15.0
19.0
24.0
28.0
32.0
ENDURA™ SPECIFICATION SERIES
MRR SERIES
ENDURA™ SPECIFICATION SERIES
OMC-A SERIES
Cold Wall Evaporator
Open Front Milk Coolers
OMC-122
DIMENSIONS
(in.)
MODEL
L*
D
H*
OMC-082-A 345/8 323/4 423/4
OMC-122-A 485/8 323/4 423/4
OMC-162-A 625/8 323/4 423/4
CAP.
UNIT CU.
VOLTS AMPS H.P. FT.
115
3.3
1/5
12.2
115
115
3.1
3.3
1/5
1/5
17.8
23.5
*Length includes door hinges. Height includes casters.
62
Cold Wall Evaporator
Dual Access Milk Coolers
DOMC-124-A
DIMENSIONS
(in.)
MODEL
L*
D
H* VOLTS AMPS
DOMC-084-A 345/8 331/2 423/4 115 3.3
DOMC-124-A 485/8 331/2 423/4 115 3.3
DOMC-164-A 625/8 331/2 423/4 115 3.4
UNIT
H.P.
1/5
1/5
1/5
*Length includes door hinges. Height includes casters.
63
CAP.
CU.
FT.
12.2
17.8
23.5
ENDURA™ SPECIFICATION SERIES
DOMC-A SERIES
ENDURA™ SPECIFICATION SERIES
HP6A-LX SERIES
Heater/Proofing Cabinet
HP6A-LX
DIMENSIONS
(in.)
MODEL
L
D
H*
HP6A-LX 263/4 321/4 713/4
MAX.
CABINET
HEATING STATIC
UNIT
LOAD
VOLTS WATTS (LB/KG)
115
1900
240/109
*Height includes casters.
3" LEDGE SPACING
(BOTTOM LOAD)
PAN CAPACITY
18 X 26
12 X 20
END LOAD
SIDE LOAD
17
34
41/2" LEDGE SPACING
(BOTTOM LOAD)
PAN CAPACITY
18 X 26
12 X 20
END LOAD
SIDE LOAD
12
24
64
ICE MERCHANDISERS
IM/IM-23GB SERIES
Outdoor And Indoor
Ice Merchandisers
IM-38
IM-45G
IM-23-HGP
DIMENSIONS
(in.)
L
D
H
CAP.
UNIT 8 LB.
VOLTS AMPS H.P. BAGS
MODEL
SOLID DOOR
IM-38
501/2 351/2 681/2 115
7.2
IM-60
73 351/2 681/2 115
7.2
SINGLE GLASS DOOR – INDOOR USE ONLY
IM-23-HGP 27
30
79
115
6.9
IM-45G
501/2 30 761/2 115
8.3
65
1/3
1/3
125
200
1/3
1/3
60
137
COUNTERTOP MERCHANDISERS
RCT SERIES
Refrigerated Countertop
Merchandisers
RCT-48 (Shown with optional stainless steel ends.
Counter/base not supplied as standard.)
DIMENSIONS
(in.)
MODEL L
D*
H*
RCT-36 36 341/8 369/16
RCT-48 48 341/8 369/16
DISPLAY
UNIT AREA
VOLTS AMPS H.P. CU. FT.
115
8.3
1/3
9.25
115
8.3
1/3
12.5
*Depth and height includes condensing unit compartment.
Optional self-serve, self closing front
doors available.
66
Bilt2Spec walk-ins are custom designed to meet
customer needs across a wide variety of applications including:
• Convenience stores
• Restaurants
• Institutional and corporate cafeterias
• Processing facilities
• Data storage facilities
• Scientific testing chambers and many others
Flexibility In Size
From a minimum 36 sq. ft. size to the more elaborate 10,000 sq. ft. warehouses, Bilt2Spec walk-ins
can be customized to provide the right amount
of temperature-controlled space. Basic modular
panel sizes, as well as many options, offer the right
flexibility to fulfill any design requirement.
67
BILT2SPEC™ CUSTOM WALK-INS
Flexibility In Application
BILT2SPEC™ CUSTOM WALK-INS
Flexibility In Options Using our wide range of options, you can, in
effect, make your walk-in an extension of your
business personality. Numerous interior and exterior finish options adapt to your decor or durability requirements. Choose from many refrigeration
system options to reliably and efficiently cool
your stored products. Many door accessories
and other add-on features are also available to
increase convenience and ease of use.
Stand-Out Standard Features
As with all Master-Bilt walk-ins, Bilt2Spec features:
• Four-inch thick foamed-in-place polyurethane
panels with cam-locking mechanisms
• Standard interior and exterior panel finish of 26 gauge acrylic-coated stucco galvanized steel
• When specified, An NSF-listed .080 textured
finish aluminum floor for slip-and-fall protection
Fully adjustable hinge
backing plates ensure a
proper fit of the door
during installation and
allow for any necessary
future adjustments
without removal of the
door or its frame.
68
BILT2SPEC™ CUSTOM WALK-INS
Master-Bilt’s standard V-Series walk-in entry door
offers superior design features like spring-loaded
cam-lift hinges, fully adjustable hinge backing
plates and a deadbolt-locking handle.
69
QUICK SHIP WALK-INS
A Quick Solution For Storage Needs
In a hurry for a walk-in structure? Master-Bilt’s
Quick Ship Program is the answer. Quick Ship
walk-ins are shipped within five working days after an order is received. Choose from hundreds
of basic freezer and cooler configurations ranging in size from 5'10" square up to 9'8" x 32'8".
Height options include 7'2", 7'6", 8'2" and 8'6".
Panels are 4" thick with 26 gauge acrylic-coated stucco galvanized steel or stucco white finish.
The floor finish, when required, is an NSF-listed
.080 textured aluminum. Standard V-Series doors
are 78" tall with choice of 24", 30" or 36" width.
Two-compartment combination walk-ins,
available in either 7'6" or 8'6" heights, are floorless in the cooler compartment and with floors
in the freezer compartment.
70
Quick Ship refrigeration system choices include
remote M-Series systems or PRS-2 packaged
systems with standard and heavy-duty options.
Remote systems consist of an M-Series condensing unit ranging from 1/2 to 6 HP and an E-Series
evaporator coil. Pre-wired condensing unit components are factory assembled on a galvanized
steel base. E-Series coils are ready to mount and
are available in off-cycle defrost for coolers &
electric defrost for freezers.
PRS-2 Series refrigeration systems consist of a
condensing unit and evaporator coil in the same
housing & are ready to mount in the ceiling. The
evaporator section mounts flush in a standard 4"
thick panel for maximum storage space. PRS-2
units help reduce labor costs because there’s no
piping or other components to field install. On
indoor models, a standard condensate evaporator pan eliminates the need for a drain line.
Remote refrigeration options
include an M-Series condensing unit (left) with matching
E-Series evaporator coil.
71
QUICK SHIP WALK-INS
Quick Ship Refrigeration Options
QUICK SHIP WALK-INS
Outdoor Quick
Ship walk-ins with
PRS-2 units are
equipped with a
weather hood and
membrane roof.
Other Options
Other Quick Ship options include:
• Door & frame kickplates (shipped loose)
• 4-foot fluorescent light fixtures - shipped
loose (less fluorescent bulbs)
• 4-foot LED light fixtures (shipped loose)
• Vinyl strip curtains for entry doors (shipped
loose)
• Exterior door ramps
Options include
exterior floor
ramps.
72
10-BILT™ WALK-INS
10-Day Shipment With More
Options
10-Bilt walk-ins include all the features of the
Quick Ship program plus additional sizes and
options. These coolers, freezers and combinations ship within 10 business days after order
receipt.
10-Bilt walk-ins are available in unlimited
standard Master-Bilt lengths. Single compartment walk-in widths range from 5'10" to 13'6"
in standard Master-Bilt widths and are 7'2", 7'6",
8'2" or 8'6" in height.
Combination units range in widths from
7'9" to 9'8" and in heights of 7'6 and 8'6". The
length is unlimited when using remote refrigeration systems (maximum single compartment
length for PRS-2 applications is 13'6").
73
10-BILT™ WALK-INS
As with Quick Ship models, refrigeration is
available in either pre-assembled remote MSeries systems or PRS-2 packaged systems with
standard-duty and heavy-duty options.
The expanded list of options for 10-Bilt
models includes:
• Door & frame kick-plates (factory-mounted)
• Third door hinge
• 4 foot fluorescent light fixtures – shipped
loose (less bulbs)
• 4 foot LED light fixtures (shipped loose)
• Vinyl strip curtains for entry doors (shipped
loose)
• Exterior and interior floor ramps
• 14" x 14" view windows for coolers & freezers
(freezer windows are heated)
• MBWA-1 alarm & light management system
• LED Light Fixture (in lieu of CFL fixture)
• Tamper-resistant screws for door hardware
• Heated and insulated receivers on remote
refrigeration units
• Pre-assembled kit for remote refrigeration
systems on qualifying models (expansion
valve and properly-sized orifice factory premounted)
• Factory-installed liquid line solenoid/temp
control kit for remote refrigeration systems
on qualifying models (pre-assembled kit
required)
74
Ready-Bilt walk-ins are completely pre-assembled
at the factory and ready to set in place at the
job site. Structures typically arrive on a gooseneck truck and, depending on size and customer
preference, lifted into place by crane, boom-lift
or forklift. No field assembly is necessary. The
refrigeration system(s) is already installed and the
entire walk-in is fully tested before shipping. All
you have to do is provide electricity for the single
source hook-up (one per refrigeration system).
Each Ready-Bilt walk-in is UL-listed as an entire
package, not just for individual components,
facilitating electrical inspections.
75
READY-BILT™ WALK-INS
Ready-Bilt: Factory
Pre-Assembled Walk-ins
READY-BILT™ WALK-INS
The Durable Construction
You Expect
Ready-Bilt™ models have the same standard features of all Master-Bilt walk-ins plus these:
• Bands of aluminum treadplate as finishing trim around top and bottom of the walk-in
• A weather-proof membrane roof to keep rain
from collecting against the adjacent building
• Pre-installed refrigeration system(s) using either
a remote M-Series system or a PRS-2 series
packaged system depending on application
• A heavy-duty door closure
• A door drip guard
Options include cantilever shelving, door kickplates, ramps, many interior and exterior finish
options and LED lighting.
Ready-Bilt models feature
a heavy-duty door with:
• A heavy-gauge, Z-shaped
structural inner frame
with a full length 1/4"
inch thick steel tapping
plate (shown at left)
• Inner heater wires lining
the perimeter (two wires
provided for freezer
doors)
• Choice of 26" x 78",
30"x 78" or 36"x 78"
sizes
76
Master-Bilt makes the construction of your
refrigerated warehouse an easy process. We
offer panels and refrigeration systems as well
as a wide range of options to customize your
project.
Foamed-In-Place Panel
Construction
Master-Bilt pour type foamed-in-place wall and
floor panels are offered in 4", 5" and 6" thicknesses of rigid urethane insulation with a 97%
closed cell content to prevent moisture absorption. We use the same cam-lock panel connectors as in our smaller walk-ins for fast, easy
assembly and leakage resistant panel-to-panel
seams.
77
REFRIGERATED WAREHOUSES
Warehouses Made Easier
REFRIGERATED WAREHOUSES
Door Construction
When an entry door is required in a refrigerated
warehouse, Master-Bilt’s heavy-duty model is
standard. Each door features a heavy-gauge, Zshaped structural inner frame with a full length
1/4" inch thick steel tapping plate. Inner heater
wires line the perimeter with two wires provided
for freezer doors. Spring-loaded, cam-lift hinges
and hydraulic closures provide effortless opening and closing while the wide surface magnetic gasket assures an airtight seal. Master-Bilt
warehouse doors also contain the same unique
field adjustable hinge backing plates found in all
walk-in entry doors.
Refrigeration
Master-Bilt offers remote refrigeration systems
ranging from 1/2 H.P. to 40 H.P. These systems are
either air or water cooled and come in six temperature ranges from +55° to -20°F. All units are
factory tested before shipping.
78
When your specifications call for a high density rail walk-in, Kool Star® by Master-Bilt is the
answer. Featuring polyurethane insulation, Kool
Star panels have a perimeter of high density
polyurethane for added protection around the
edges.
Kool Star offers maximum versatility and convenience for a variety of applications including:
• Convenience stores and other retail settings
• Restaurants
• Hotels
• Institutional kitchens
• Schools and universities
79
KOOL STAR® HIGH DENSITY RAIL WALK-INS
The High Density Solution
KOOL STAR® HIGH DENSITY RAIL WALK-INS
Complete System
All Kool Star walk-in panels come with either a
matching remote or packaged refrigeration system
for a complete answer to your cold storage or
retail needs. Refrigeration may also be provided
through dual or multi-compressor remote systems.
Flexible Sizing
Kool Star coolers, freezers and cooler/freezer
combinations aren't based on standard sizes and
can be built to any dimension to the nearest 1/2".
The only restrictions on size are an overall height
of not more than 10 feet. L-shapes and glass door
fronts are also available.
Kool Star
L-shaped
walk-ins and
glass door
fronts as well
as coolerfreezer combinations (left)
are available.
80
REFRIGERATION SYSTEMS
B-Series Condensing Units
Master-Bilt offers one of its most complete condensing units in the B-Series. These units are
factory assembled on a galvanized steel base
and are available from 3 H.P. to 40 H.P.
Accessories are pre-wired and mounted,
resulting in minimal field installation time. After
electrical hookup, connection and charging of
the lines, the unit is operational.
B-Series units are available in hermetic, semihermetic and scroll compressor models, with or
without matching evaporator coils.
81
REFRIGERATION SYSTEMS
M-Series High Ambient
Condensing Units
Designed to withstand the harshest conditions,
M-Series condensing units contain the most
efficient combination of condenser coil, fan and
fan motor available.
These units offer the widest variety of options
in package components and factory pre-assembly. Package options on the basic standard remote unit include a factory pre-charged system
with quick-connect liquid and suction line sets
up to 40 ft. M-Series units vary from 1/2 to 6 H.P.
with a wide selection of temperature ranges.
M-Series condensing units can be configured
with hermetic, semi-hermetic or scroll compressors with or without matching evaporator coils.
82
E-Series evaporator coils are ready to mount in
position and are available with air (off cycle)
defrost, electric defrost or optional reverse
cycle defrost when equipped with the Master
Controller Reverse Cycle Defrost system. Each
is also furnished standard with a properly sized
expansion valve and room thermostat. Energy
efficient EC motors are standard on single
phase coils.
Electric defrost models feature defrost
termination/fan delay controls and drain line
heaters.
83
REFRIGERATION SYSTEMS
E-Series Evaporator Coils
REFRIGERATION SYSTEMS
PRS-2 Series Packaged
Refrigeration Systems
Though typically offered in combination with
Quick Ship walk-ins, PRS-2 series packaged
refrigeration systems can also be used in custom
walk-ins. It's also possible to use multiple units
within a single walk-in.
The combination of a condensing unit and
evaporator coil together in one convenient package saves time and installation costs for walk-ins
located in c-stores, restaurants and many other
foodservice applications.
Designed to maximize storage space, the
evaporator section mounts flush in a standard 4"
thick walk-in ceiling or wall panel.
For more information about Quick Ship
walk-ins, see pp. 70-72.
A PRS-2 ceiling mount
packaged refrigeration
system with
cover removed.
Evaporator fans
Compressor
Evaporator coil
Electrical box
Condenser coil
84
Remoting all refrigerated equipment in an establishment, including reach-ins, walk-ins and ice
machines, to a single MRS system removes the
heat produced by multiple refrigeration units
from kitchens or stores and reduces air conditioning loads and energy bills. The MRS system,
typically roof-mounted, also reduces noise level,
service calls and extends the life of equipment.
Modular design sets the MRS series apart.
Each system is composed of individual modules
An MRS unit shown in optional stainless steel finish.
85
REFRIGERATION SYSTEMS
MRS Series Modular MultiCompressor Refrigeration Systems
REFRIGERATION SYSTEMS
MRS system layout example.
containing a condenser, compressor, generouslysized receiver and other appropriate components
all enclosed within a single galvanized steel
housing. This modularity maximizes configuration flexibility, simplifies service and provides for
future expandibility.
Factory pre-wired to an electrical panel for
one-point connection, MRS systems are designed
to be easily installed.
The modular condensers are rated at 110°F to
withstand high temperatures. Each module also
contains head pressure controls and crankcase
heaters for low ambient protection.
Other benefits include pre-piping to an internal pitch pocket to decrease roof water leakage
from the roof.
MRS systems can also be equipped with the
optional Master Controller Reverse Cycle Defrost
system (see pp. 92-96)
86
When your requirements call for two-compressor
unit, the DRS series is the answer. An economical
complement to the MRS series, DRS models share
many of the same quality construction features as
well as the same range of applications.
DRS systems feature:
• A multi-circuited condenser coil designed for
110°F ambient
• Scroll compressors for freezer applications up
to 5 HP
• Hermetic compressors for cooler applications
up to 3 HP
• Common base and frame assembly
• Standard galvanized finish with optional stainless steel finish
The Master Controller and reverse cycle defrost
are also options on the DRS series (see pp. 92-96).
Shown with optional
stainless steel finish.
87
REFRIGERATION SYSTEMS
DRS Series Dual Compressor Systems
REFRIGERATION SYSTEMS
PS Series Parallel Rack
Refrigeration Systems
Master-Bilt's PS series systems are designed to be
energy efficient and environmentally friendly. PS
series units, matched to an appropriate condenser, are modular and allow you to add or change
compressors as needed. The standard rack housing and frame is made of durable galvanized
steel with stainless steel as an option.
A few PS series features:
• Parallel units match refrigeration capacity to actual load. This amounts to at least 20%
energy savings over a single compressor unit.
• A wide range of compressors is available, including digital scrolls, to better match capacity
and budget needs
• A variety of electronic controllers is available
based upon application requirements such as
capability to interface with existing building
controls along with HACCP recording
88
Individual Single-Compressor System
Installations
• MULTIPLE roof curbs
• MULTIPLE roof penetrations
• MULTIPLE electrical connections
• MULTIPLE piping connections
One Remote Rack System Installation
• SINGLE roof curb
• SINGLE roof penetration
• SINGLE electrical connection
• SINGLE piping connection
89
REFRIGERATION SYSTEMS
Rack System Efficiency
REFRIGERATION SYSTEMS
GPS Series Glycol Parallel Rack
Refrigeration Systems
Master-Bilt’s GPS series parallel glycol rack
systems use the most efficient combination of
refrigeration system and glycol loop technology
to cool refrigeration equipment in foodservice
and retail environments.
Master-Bilt’s glycol parallel
rack system is a recipient of the
Kitchen Innovations 2013 Award
presented by the National
Restaurant Association
Restaurant, Hotel-Motel Show.
90
The Glycol Loop Process
Master-Bilt GPS series parallel rack systems
circulate glycol through a loop, typically
copper or ABS piping, to refrigeration equipment such as merchandisers, reach-ins and
walk-ins. Return lines carry heated glycol from
each piece of equipment back to the rack
system for re-cooling.
ENTER
BACK
91
REFRIGERATION SYSTEMS
GPS series glycol systems utilize electronic
floating head pressure technology to reduce
energy consumption by as much as 25% over
conventional mechanically controlled glycol
systems. State-of-the-art all-digital controls also
provide greater precision, diagnostics, data
logging and monitoring capability.
In addition, refrigerant charge and piping are
reduced for less chance of refrigerant leaks.
MASTER CONTROLLER REVERSE CYCLE DEFROST
Optional Master Controller
Reverse Cycle Defrost For Walk-ins
The Master Controller Reverse Cycle Defrost
(MCRCD) system is a custom-designed eletronic
controller for Master-Bilt walk-in cooler and
freezer refrigeration systems. The Master Controller board, mounted on an evaporator, controls an
electric expansion valve in response to evaporator superheat and return air temperature. Integrated reverse cycle defrost completely removes
frost build-up in coils and works much faster
than electric defrost heaters.
The MCRCD system also has built-in Demand
The Master Controller Reverse Cycle Defrost System
saves up to 27% more energy than traditional
mechanical systems.
92
Reverse Cycle Defrost
Eliminate inefficient defrost methods with this
patented (U.S. patent no. 7,073,344) process
from Master-Bilt.
Reverse cycle defrost, works by means of a reverse cycle valve added to the condensing unit.
The valve's function is to reverse the direction of refrigerant flow during defrost. When the
Master Controller’s demand defrost determines a
defrost is necessary, the reverse cycle valve is activated and the high temperature refrigerant flow
is reversed. The refrigerant flows back through
the evaporator coil heating it along its entire
length and completely eliminating frost build-up.
Reverse cycle technology offers several
significant advantages over the electric defrost
method:
• The process uses less energy than electric
defrost heaters. Reverse cycle reduces defrost energy usage by up to 80%.
• Reverse cycle eliminates not only the need for
defrost heaters, but also head pressure control
93
MASTER CONTROLLER REVERSE CYCLE DEFROST
Defrost which initiates reverse cycle defrosts only
as needed, allowing more energy savings.
MCRCD is part of a Master-Bilt refrigeration
system which also includes a remote condensing
unit or multi-compressor unit and one or more
evaporator coils.
MASTER CONTROLLER REVERSE CYCLE DEFROST
valves, check valves and expansion valves at
the condenser. It also eliminates the need for a
liquid receiver in many systems.
• Defrost time is also greatly shortened. The
average time using electric defrost heaters is
20-30 minutes. Reverse cycle can perform a
completely “clean” defrost in as little as 3 to 5
minutes in a freezer or 11/2 to 2 minutes in a
cooler.
Reverse Cycle Defrost reverses the direction of
refrigerant flow for a quick and “clean” defrost.
94
The Web2Walk-In software loaded on each
Master Controller allows you to remotely monitor and program all data and setpoints using
any device, including PC, Mac, smartphone, or
tablet, with a wireless internet or cabled (cat 5)
connection (internet connection not required
for controller operation). With Web2Walk-In,
95
MASTER CONTROLLER REVERSE CYCLE DEFROST
Web2Walk-In™
MASTER CONTROLLER REVERSE CYCLE DEFROST
Web2Walk-in provides
complete data access to
the MCRCD system from
practically anywhere.
there’s no need for a service tech to climb onto
a roof or enter the walk-in to monitor or adjust
the refrigeration system. Plus, constant access to
data allows users to improve refrigeration system
performance and avoid service issues.
Reverse Cycle Defrost & LEED
Reverse cycle defrost meets the U.S. Green
Building Council’s LEED prescriptive of “no
electrical defrosting” as outlined in "LEED 2009
for Retail: New Construction and Major Renovations.” Online at www.usgbc.org/ShowFile.
aspx?DocumentID=7956.
96
Now you can monitor your walk-in with electronic precision and ease using the optional
factory-installed MBWA-1 walk-in alarm/light
management system. Replace less accurate
mechanical thermometers, separate alarms and
light switches with this one convenient unit.
The MBWA-1 is designed to save energy with
its door open alarm and gives you the choice of
one of two other options: A light management
system or a panic alarm.
Other features
include:
• LED temperature
display
• High/Low temperature alarms
with delays
• Optional battery
back-up (battery
connector cable
and 9V battery
not included)
97
MBWA-1 DIGITAL ALARM & LIGHT SYSTEM
A "Thermo-Alarm-Light-DoorPanic" Solution For Your Walk-In
Cooler Or Freezer
GLASS SENTRY II ANTI-SWEAT CONTROL MODULE
Glass Sentry II Anti-Sweat
Control Module
The Glass Sentry II anti-sweat control module is
designed to save energy by turning off glass door
and frame heaters when no door heat is necessary. The module functions by energizing heaters
based on sensor readings of store temperature
and humidity.
The body of the
Glass Sentry II
device is mounted
to the walk-in
roof or a location
free from product
stacking and other items that may
cause damage.
98
CONTACT DIRECTORY
SALES & CUSTOMER SERVICE
Phone: 662-534-9061 • 800-647-1284
Email: [email protected]
WARRANTY PARTS & TECHNICAL SERVICE
Phone: 662-534-9061 • 800-684-8988
Email: [email protected]
NON-WARRANTY PARTS SALES – U.S.
Heritage Food Service Equipment
Phone: 800-458-5593
Email: [email protected]
3Wire
Phone: 877-857-7274
Email: [email protected]
Whaley Foodservice
Phone: 800-877-2662
Email: [email protected]
Parts Town
Phone: 800-438-8898
Email: [email protected]
WARRANTY & NON-WARRANTY PARTS SALES – CANADA
Heritage Food Service Parts of Canada
Phone: 877-556-3646
Email: [email protected]
As we are continuously improving our products to benefit
our customers, we reserve the right to change specifications without notice.
800-647-1284 • www.master-bilt.com
1086-10/15-web © ©2015 Master-Bilt Products, an unincorporated division of
Standex International Corporation. All rights reserved. Printed in U.S.A.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement