RV 10 Rotary Evaporators

RV 10 Rotary Evaporators
RV 10 Rotary Evaporators
RV 10 Rotary Evaporators
Overview of components
04
RV 10 basic, RV 10 digital
05
RV 10 control
06
Technical data
07
Accessories
Overview of featured glass accessories
08
Set of glassware, protective cover
09
Condensers
10
Vapor tubes, evaporation flasks,
additional accessories
11
Additional accessories, receiving flasks
12
Miscellaneous accessories
13
System accessories
Magnetic valves
14
Choke valve, filter, pressure regulating valve,
vacuum pump
15
Vacuum pump, chillers
16
RV 10 FLEX System
17
03
You can change states of aggregation.
Or the way you work with them.
With the new RV 10 range of rotary evaporators, IKA® has confirmed that there is always room
for improvement, even when it comes to one of the oldest of chemical processes: distillation.
The RV 10 Rotary Evaporators set new standards for safety, efficiency and ease of use. Great attention
is paid to the issue of safety, from the Basic version upwards. Every model features a lifting mechanism
that raises the evaporator piston out of the heating bath in case of power failure. The comprehensive
safety features also include interval operation, smooth start, end position recognition for the
evaporator piston, and a timer function. The digital version also provides a digital temperature display
and an RS 232 interface. For fully automated distillation, IKA® offers the control version complete with
integrated vacuum controller, USB interface and graphical display.
5 Year
warranty*
* 2 + 3 years after registering at
www.ika.com/register,
glassware and wearing parts excluded
9
1
45°
8
2
3
7
4
6
5
Overview of components
1 Vertical glassware (other options available)
6 Heating bath can be used separately Ergonomic carrying handles on heating bath
2 Various flask sizes
7 Can be moved by 150 mm to accommodate
different flasks
3 Vacuum connection plus Woulf bottle
Highly solvent-resistant PTFE seal
8 Motorised height-adjustable lift
Lift raised automatically in case of power outage
4 Adjustable safety stop
5 Two displays for optimal view
9 Choice of angle
6
RV 10 basic and RV 10 digital
05
The basic and digital system
RV 10 basic
The RV 10 basic rotary evaporator with integrated HB 10 heating bath is the base system of IKA®’s new rotary
evaporator line. The RV 10 basic is available with vertical glassware, either coated or uncoated.
– Analog heating bath with adjustable safety circuit, “stand alone“ operation is possible, pivoting safety hood as an accessory
– Safe and simple operation by means of ergonomically shaped control unit in the front
– Motorized lift (stroke 140 mm) with“safety stop“ function, if the power cuts out the evaporator
flask is automatically lifted out of the heating bath
– Adjustable end position recognition to protect the glass from breaking
– Speed range from 20 to 280 rpm
– Smooth start from 100 rpm
– Digital speed display
– Rotates clockwise and counterclockwise in interval operation for the drying process
– Timer function for time lapse control
– Water/oil heating bath with integrated carrying handles for safe handling
– Heats up quickly because of optimised bath volumes
– Push-off mechanism to loosen tightly fitting flasks
– Suitable for DIN EN 12697-3 (Asphalt test for
hot asphalt)
– 5 year warranty after registration
RV 10 basic
Model
Description
RV 10 basic V
with heating bath HB 10 basic and vertical glassware RV 10.1
Ident. No.
8022300
RV 10 basic V-C
with heating bath HB 10 basic and vertical glassware, coated RV 10.10
8022900
RV 10 digital
IKA®’s RV 10 digital is a combination of performance, reliability and versatility and offers users the precision of an
accurate digitally controlled heating bath. The perfectly coordinated data transfer between the heating bath and
the drive unit as well as the option of remote operation from a PC ensure results that can be reproduced any time.
Same properties as RV 10 basic, with the following additional functions:
– Digital water/oil heating bath with integrated carrying handles, “stand alone” operation is possible
– Temperature control of the heating bath by
a micro controller
– Digital temperature display
– Infrared interface for data transfer from the heating bath to the drive unit
– RS 232 interface for PC remote operation
with labworldsoft®
– Timer function shuts off heating bath at
completion of timer sequence
– 5 year warranty after registration
RV 10 digital
Model
Description
RV 10 digital V
with heating bath HB 10 digital and vertical glassware RV 10.1
8022500
RV 10 digital V-C
with heating bath HB 10 digital and vertical glassware, coated RV 10.10
8023100
RV 10 digital FLEX
with heating bath HB 10 digital, incl. Woulff bottle
8031500
! Required glassware for the FLEX package has to be ordered seperately. See pages 9 - 12.
Ident. No.
RV 10 control
06
The fully automated rotary evaporator
RV 10 control
The RV 10 control is the flagship of the new rotary evaporator series
by IKA®. It offers all the functions of the RV 10 digital. But the IKA®
RV 10 control goes one step further. Like the RV 10 digital, it can be precisely
controlled via the RS 232 interface for remote PC operation with IKA®‘s
labworldsoft® and is thus ideal for automatic operation - but that‘s not all; the
control functions also enable completely automatic distillation both for volumebased processes and full drying depending on the area of application.
The expandable solvent library also allows you to incorporate new processes.
Functions and benefits
Same properties as RV 10 digital, with the following additional functions:
– Integrated vacuum controller with central display for
automatic distilling and ramp programming
– Integrated solvent library, which can be extended by
the user
– Distillation specific parameters stored for standard
distillations
– Automatic transfer of measurements and distillation
type with one key press
– Programmable volume controlled distillation
– Color graphic display for safe and comfortable
operation
– Display of distillation curves
– Multiple languages
– Automatic ventilation at the end of each test
– Cooling water switched off automatically at the end
of the test
– Integrated cooling water monitoring
– Heating bath safety management; automatic heating
bath monitoring with distillation stop in case of
temperature errors
– Heating bath switched off automatically at the end
of the test
– USB interface
– 5 years warranty after registration
– New: Now RV 10.4002 Magnetic valve included in delivery
RV 10 control
Model
RV 10 control V
Description
with heating bath HB 10 control, vertical glassware RV 10.1
and RV 10.4002 Magnetic valve laboratory vacuum
RV 10 control V-C
with heating bath HB 10 control, vertical glassware, coated RV 10.10
and RV 10.4002 Magnetic valve laboratory vacuum
8023300
RV 10 control FLEX
with heating bath HB 10 control, incl. Woulff bottle
and RV 10.4002 Magnetic valve laboratory vacuum
8031600
! Required glassware for the FLEX package has to be ordered separately. See pages 9 - 12.
Ident. No.
8022700
Technical data
Direct comparison
RV 10 digital
RV 10 control
Packages with glassware
RV 10 basic V
RV 10 basic V-C
RV 10 basic
RV 10 digital V
RV 10 digital V-C
RV 10 control V
RV 10 control V-C
Cooler type
V=vertical
V-C=vertical coated
D=diagonal
D-C=diagonal coated
V=vertical
V-C=vertical coated
D=diagonal
D-C=diagonal coated
V=vertical
V-C=vertical coated
D=diagonal
D-C=diagonal coated
Cooling surface
1.200 cm2
1.200 cm²
1.200 cm²
Motor type
brushless DC drive motor
brushless DC drive motor
brushless DC drive motor
Motor rating input
50 W
50 W
50 W
Speed range
20 to 280 rpm
20 to 280 rpm
20 to 280 rpm
Speed display
digital
digital
digital
Clockwise and counter-clockwise interval operation
yes
yes
yes
Smooth start
yes
yes
yes
Head angle adjustable
0 to 45°
0 to 45°
0 to 45°
Stroke displacement
140 mm, motorised
140 mm, motorised
140 mm, motorised
Setting of lower end stop
60 mm, contact-free
60 mm, contact-free
60 mm, contact-free
Vacuum controller
accessories
accessories
integrated
Heating bath
HB 10 basic
HB 10 digital
HB 10 control
Temperature range
RT to 180 °C
RT to 180 °C
RT to 180 °C
Heating power
1.300 W
1.300 W
1.300 W
Controller
capillary tube controller
micro controller
micro controller
Temperature display
scale
digital
digital
Setting accuracy
scale
1K
1K
Control deviation
±5K
±1K
±1K
In-house vacuum (industrial vacuum source for many users)
1)
1)
RV 10.4002 Magnetic valve **
Laboratory vacuum pump (multiple connections)
1)
1)
RV 10.4002 Magnetic valve **
Diaphragm vacuum pump (one single connection)
1)
1)
RV 10.4002 Magnetic valve **
Dimensions without glassware (W x D x H)
530 x 410 x 570 mm
530 x 410 x 570 mm
530 x 410 x 570 mm
RV 10 diagonal (W x D x H)
890 x 410 x 670 mm
890 x 410 x 670 mm
890 x 410 x 670 mm
RV 10 vertical (W x D x H)
680 x 410 x 990 mm
680 x 410 x 990 mm
680 x 410 x 990 mm
Weight of evaporator incl.
heating bath without glass parts
20 kg
20 kg
21,5 kg
Permisable ambient temperature
5 to 40 °C
5 to 40 °C
5 to 40 °C
Protection class acc. to DIN EN 60529
IP 20
IP 20
IP 20
Package with vertical glassware, EU plug
8022300
8022500
8022700
Package with vertical coated glassware, EU plug
8022900
8023100
8023300
Package without glassware (FLEX)
--
8031500
8031600
Drive
Required accessories for an existing vacuum*
General data
Ident. No.
* Will be controlled by the vacuum controller of the RV 10 control rotary evaporator.
** Magnetic valve now included with delivery of every RV 10 control.
1)
No accessories required for vacuum pump connection (vacuum level must be controlled by external vacuum controller).
07
Overview
08
Featured glass accessories
Set
Setofofglassware
glassware
Page
Page 09
09
Seal
Page
13
Seal
Page 13
Evaporation flask
flasks
Page
11
Evaporation
Page 11
Powder
Powderflask
flasks
Page
Page11
11
Distilling
Distillingspider
spider
Page
Page12
12
Condenser
Condenser
Page10
10
Page
Receiving
Receivingflask
flasks
Page12
12
Page
Evaporation
cylinder
Evaporation
cylinder
Page
Page
1111
RV 10 Glassware accessories
Set of glassware, protective cover
RV 10.1 Set of glassware, vertical
General data
Condenser type
vertical
Cooling surface
1.200 cm2
Model
Ident. No.
RV 10.1 Set of glassware, vertical
3655300
RV 10.10 Set of glassware, vertical, coated
3755400
Compact vertical condenser for all standard
distillations. The solvent to be distilled can
be continuously fed in through the PTFE inlet
tube.
A 1.000 ml evaporator and 1.000 ml
receiving flask are included.
Also available with coating. Condenser and
receiving flask coated for shatter
protection.
! Glassware included in all packages,
except FLEX.
RV 10.2 Set of glassware, diagonal
General data
Condenser type
diagonal
Cooling surface
1.200 cm2
Model
Ident. No.
RV 10.2 Set of glassware, diagonal
3755300
RV 10.20 Set of glassware, diagonal, coated
3755500
Diagonal condenser for all standard
distillations. A 1.000 ml evaporator and
1.000 ml receiving flask are included.
Also available with coating. Condenser and
receiving flask coated for shatter protection
HB 10.1 Shield for heating bath
General data
Material
Model
HB 10.1 Shield for heating bath HB 10
Polycarbonate
Ident. No.
3641800
HB 10.2 Protective cover for
heating bath
General data
Material
Model
HB 10.2 Protective cover for heating bath HB 10
For optimal protection against splashes
of hot liquid.
Polycarbonate
Ident. No.
3641000
Essential accessory if it is not possible to work
in an extractor hood. Protects the user against
splashes of hot liquid and in the event of the
evaporator flask breaking.
09
RV 10 Glassware accessories
10
Condensers
RV 10.3 Vertical-intensive
condenser with manifold
Vertical-intensive condenser with double
jacket and manifold for particularly efficient
condensation. The solvent to be distilled can
be continuously fed in at the manifold using
the PTFE inlet tube.
Also available with coating for shatter protection.
General data
Condenser type
vertical-intensive
Cooling surface
1.400 cm2
Model
Ident. No.
RV 10.3 Vertical-intensive condenser
with manifold
RV 10.30 Vertical-intensive condenser
with manifold, coated
3741000
3741100
RV 10.4 Dry ice condenser
General data
Dry ice condenser for distilling low-boiling
point solvents. The solvent to be distilled can
be continuously fed in through the PTFE inlet
tube. Cooling by dry ice, no cooling water
required. Max. condensation thanks to low
temperatures. Also available with coating for
shatter protection.
Condenser type
Dry ice condenser
Cooling surface
620 cm2
Model
Ident. No.
RV 10.4 Dry ice condenser
3742000
RV 10.40 Dry ice condenser, coated
3742100
! Not
possible with autodistillation mode on
RV 10 control.
RV 10.5 Vertical condenser with
manifold and cut-off valve for reflux
distillation
The solvent to be distilled can be continuously
fed in through the PTFE inlet tube. Also available with coating for shatter protection.
RV 10.74 Vapor tube short.
! Requires
RV 10.6 Vertical-intensive condenser
with manifold and cut-off valve for
reflux distillation
The manifold features a condensate cover and
an outlet channel which prevent the condensate from coming into contact with the seal.
The solvent to be distilled can be continuously
fed in through the PTFE inlet tube. Also available with coating for shatter protection.
RV 10.74 Vapor tube short.
! Requires
General data
Condenser type
vertical
Cooling surface
1.200 cm2
Model
RV 10.5 Vertical condenser with manifold and cut-off
valve for reflux distillation
RV 10.50 Vertical condenser with manifold and cutoff valve for reflux distillation, coated
Ident. No.
3743000
3743100
General data
Condenser type
vertical-intensive
Cooling surface
1.400 cm2
Model
RV 10.6 Vertical-intensive condenser with manifold and
cut-off valve for reflux distillation
RV 10.60 Vertical-intensive condenser with manifold
and cut-off valve for reflux distillation, coated
Ident. No.
3744000
3744100
RV 10 Glassware accessories
Vapor tubes, evaporation flasks, additional accessories
RV 10.70 Vapor tube NS 29/32
General data
Material
borosilicate glass
Model
Ident. No.
RV 10.70 Vapor tube
For all glassware.
! Included with each RV 10 package.
3812200
RV 10.74 Vapor tube short NS 29/32
General data
Material
borosilicate glass
Model
For vertical condensers RV 10.5 and RV 10.6.
Ident. No.
RV 10.74 Vapor tube
3971700
Evaporation flask NS 29/32
General data
Volume ( in ml )
50, 100, 250, 500, 1.000, 2.000, 3.000
Material
Model
borosilicate glass
The flask, which is made of high quality
borosilicate glass, is available in seven
different sizes.
Ident. No.
RV 10.80 Evaporation flask, 50 ml
3740100
RV 10.81 Evaporation flask, 100 ml
3740200
RV 10.82 Evaporation flask, 250 ml
3740300
RV 10.83 Evaporation flask, 500 ml
3740400
RV 10.84 Evaporation flask, 1.000 ml
3740500
RV 10.85 Evaporation flask, 2.000 ml
3740600
RV 10.86 Evaporation flask, 3.000 ml
3740700
Powder flask NS 29/32
General data
Volume ( in ml )
Material
Model
500, 1.000, 2.000
borosilicate glass
Ident. No.
RV 10.300 Powder flask, 500 ml
3738200
RV 10.301 Powder flask, 1.000 ml
3738300
RV 10.302 Powder flask, 2.000 ml
3738400
The flask, which is made of high quality
borosilicate glass, is available in three
different sizes. The powder flask optimizes
powder drying applications by avoiding the
accumulation of powder on the walls of the
flask and makes full use of the clockwise and
counterclockwise interval rotation.
Evaporation cylinder NS 29/32
General data
Volume ( in ml )
Material
Model
500, 1.500
borosilicate glass
Ident. No.
RV 10.400 Evaporation cylinder, 500 ml
3738800
RV 10.401 Evaporation cylinder, 1.500 ml
3738900
The cylinder, which is made of high quality
borosilicate glass, is available in two different
sizes. Makes retrieval of viscous substances
easy.
11
RV 10 Glassware accessories
12
Additional accessories, receiving flasks
RV 10.500 Foam brake NS 29/32
General data
The rising foam produces bursts in the glass
ball extension. This stops foam from entering
the receiving flask.
Material
borosilicate glass
Model
Ident. No.
RV 10.500 Foam brake
3739200
! Note:
when using a 3 liter evaporation
flask, RV 10.3000 Extension plate is
required.
Distilling spider with distilling
sleeves NS 29/32
For simultaneous distillation in 6, 12 or 20
distilling sleeves, included with purchase.
Distilling spider with 5 flasks
NS 29/32
For simultaneous distillation in 5
evaporation flasks, included with purchase.
General data
Material
borosilicate glass
Model
Ident. No.
RV 10.600 Distilling spider with 6 distilling sleeves
3739400
RV 10.601 Distilling spider with 12 distilling sleeves
3739500
RV 10.602 Distilling spider with 20 distilling sleeves
3739600
RV 10.610 Distilling sleeve, 20 ml
3919400
General data
Material
borosilicate glass
Model
Ident. No.
RV 10.606 Distilling spider with 5 flasks, 50 ml
3740800
RV 10.607 Distilling spider with 5 flasks, 100 ml
3740900
RV 10.90 Evaporation flask, 50 ml
3741200
RV 10.91 Evaporation flask, 100 ml
3741300
Receiving flask KS 35/20
General data
The flask, which is made of high quality borosilicate glass, is available in six
different sizes, either coated or uncoated.
Volume ( in ml )
Material
100, 250, 500, 1.000, 2.000, 3.000
borosilicate glass uncoated / coated
Model
Ident. No.
RV 10.100 Receiving flask, 100 ml
3742200
RV 10.101 Receiving flask, 250 ml
3742300
RV 10.102 Receiving flask, 500 ml
3742400
RV 10.103 Receiving flask, 1.000 ml
3742500
RV 10.104 Receiving flask, 2.000 ml
3742600
RV 10.105 Receiving flask, 3.000 ml
3742700
RV 10.200 Receiving flask, coated 100 ml
3743200
RV 10.201 Receiving flask, coated 250 ml
3743300
RV 10.202 Receiving flask, coated 500 ml
3743400
RV 10.203 Receiving flask, coated, 1.000 ml
3743500
RV 10.204 Receiving flask, coated, 2.000 ml
3743600
RV 10.205 Receiving flask, coated, 3.000 ml
3743700
RV 10 Accessories
Miscellaneous accessories
RV 10.3000 Extension plate
General data
Dimensions (W x D x H)
Model
RV 10.3000 Extension plate
200 x 270 x 27 mm
Accessories required when using
RV 10.500 Foam brake.
Ident. No.
3859000
! Note:
Allows the heating bath to be moved
150 mm horizontally. Accessory required
when using the RV 10.500 Foam brake and
3 liter evaporation flask.
RV 10.8001 Seal
General data
Material
Model
RV 10.8001 Seal
PTFE, stainless steel
Ident. No.
3907000
New airtight lip-seal from a PTFE compound
with a built-in stainless steel spring.
13
RV 10 System accessories
Magnetic valves
14
RV 10 basic
RV 10 digital
RV 10 control
Required accessories for an existing vacuum
Magnetic valve in-house vacuum system
1)
1)
RV 10.4002
Magnetic valve laboratory vacuum
1)
1)
RV 10.4002
Pump control incl. magnetic valve
1)
1)
RV 10.4003
Choke water valve
–
–
RV 10.5001
Filter
–
–
RV 10.5002
Pressure regulating valve
RV 10.5003
RV 10.5003
RV 10.5003
LVS 105 T - 10 ef
LVS 105 T - 10 ef
MPC 105 T
for one rotary evaporator
KV 600
KV 600
KV 600
for two rotary evaporators
UC 006
UC 006
UC 006
Recommended accessories for tap water (faucet) connection
Supplementary vacuum system
Vacuum system
Additional chiller system
1)
no accessories required for vacuum pump connection (vacuum level must be controlled by external vacuum controller).
RV 10.4002 Magnetic valve
laboratory vacuum
For a single or multiple connection
benchtop diaphragm vacuum pump.
! Accessory
required for an existing vacuum.
New: now included with each RV 10
control system
General data
Power
24 V / 9 W
Model
Ident. No.
RV 10.4002 Magnetic valve laboratory vacuum
3880300
Accessory for
RV 10 control
RV 10.4003 Pump control
incl. magnetic valve
General data
Power magnetic valve
Power pump control
One rotary evaporator at one pump / tabletop
operation. Pump stops when the set vacuum
is reached and automatically switches back on
again.
Model
RV 10.4003 Pump control incl. magnetic valve
Accessory for
RV 10 control
! Accessory
required for an existing vacuum.
For non EU countries a plug adapter is required.
24 V / 6 W
100-240 V, 50 / 60 Hz
Ident. No.
3900200
RV 10 System accessories
Choke valve, filter, pressure regulating valve, vacuum pump
RV 10.5001 Choke water valve
General data
Power
24 V / 6 W
Connection diameter
10 mm
Model
Ident. No.
RV 10.5001 Choke water valve
To regulate the water flow. The integrated
magnetic valve closes/opens the water circuit
during automatic distillation.
3902700
Accessory for
! Accessory
recommended for tap water
connection.
RV 10 control
RV 10.5002 Filter
General data
Mesh thickness
100 µm
Connection diameter
10 mm
Pressure
max. 11 bar
Model
Ident. No.
RV 10.5002 Filter
3903800
To prevent contamination of the water pipes.
With removable filter for easy cleaning.
! Accessory
recommended for tap water
connection.
Accessory for
RV 10 control
RV 10.5003 Pressure regulating valve
General data
Connection diameter
10 mm
Pressure
max. input 25 bar, max. output 1 bar
Model
For adjusting the cooling water pressure when
connecting to a tap water system.
Ident. No.
3907100
RV10.5003 Pressure regulating valve
! Accessory
recommended for tap water
connection.
Accessory for
RV 10 basic
RV 10 digital
RV 10 control
LVS 105 T 10-ef
General data
Pumping speed 50/60 Hz
1,2 m³ / h
(DIN 28432 at speed of 1350 rpm)
20 l / min
Ultimate vacuum
< 2,0 mbar
Operating pressure
1 bar
Connectors for tube
ID 8 mm
Permissible ambient temperature
Voltage
90 - 240 V
Motor protection
IP 20
Power
830 W
Frequency
50/60 Hz
Weight
9 kg
Dimensions (W x D x H)
Ports
250 x 260 x 435 mm
RS 232 / SUB-D 9-pole
Model
Ident. No.
LVS 105 T 10-ef
4067800
Accessory for
RV 10 basic
+10...+40 °C
RV 10 digital
- Compact, dry-running, chemical resistant pump
systems, the ideal solution for many applications
in chemical laboratories and research
- Fully automatic pump system with built-in
solvent library
- Graphic display
- Close to 100% solvent recovery
- User-friendly operation
- Optimal stability
- Quick and easy maintenance
- Equipped with a speed regulated vacuum
controller and a chemical resistant diaphragm
pump. The pumping speed can be precisely
controlled, e.g. for gentle distillations
15
RV 10 System accessories
16
Vacuum pump, chillers
MPC 105 T
General data
- For dry, oil-free applications in the low vacuum
range
- Compact and space saving design
- Quiet running and long lifetime
- Easy to service and low operating costs
- Chemically resistant diaphragm pumps (MPC) are
resistant to aggressive solvents and acidic vapors diaphragms and gas contacting parts consist of PTFE
and PTFE compounds and the pumping and connection heads are carbon fiber reinforced with electrical
conductibility.
Pumping speed 50/60 Hz
0,8 m³ / h
(DIN 28432 at speed of 1350 rpm)
13 l / min
Ultimate vacuum
< 2,0 mbar
Operating pressure
1 bar
Connectors for tube
ID 8 mm
Permissible ambient temperature
+10...+40 °C
Voltage
115/230 V
Motor protection
IP 42
Power
68 W
Frequency
50/60 Hz
Weight
7,5 kg
Dimensions (W x D x H)
235 x 145 x 327 mm
Model
Ident. No.
MPC 105 T
4067700
Accessory for
RV 10 control
KV 600 digital
General data
V 600 digital is an actively cooled chiller with
K
an air-cooled refrigeration system, featuring a
user-friendly microprocessor controller with large
temperature display. The temperature accuracy
is ± 1 K.
Temperature range
-20 to 40 °C
Temperature display and setting
digital
Temperature sensor internal
PT 100
Refrigerant
R134a
Max. delivery capacity of pressure pump
12 l /min
Pump connection for hose
NW8/12
Bath volume
4l
Dimensions (W x D x H)
Power supply requirement
225 x 360 x 380 mm
208 - 240 V 1 50/60 Hz
Min. ambient temperature
5 °C
Max. ambient temperature
32 °C
Model
Ident. No.
KV 600 digital (230 V 50/60 Hz)
3410500
Accessory for
RV 10 basic
RV 10 digital
RV 10 control
UC 006 Unichiller
General data
- Chiller with air-cooled refrigerating unit and
circulation pump
- Evaporator (cooler), tank, housing and pressuresuction pump made of stainless steel
- Digital temperature adjustment and digital
temperature display
- Level indicator with sight glass
- Low-Cost-Controller: Modern and easy to use
microprocessor controller with a large temperature
display
- LED indicators for pump, cooling and heating
- Simple operation using only 3 keys
Operating temperature range
-20 to 40 °C
Temperature display
digital
Cooling power at 15°C
0,6 kW
Refrigerant
R134a
Pump connection for hose
NW8/12
Min. filling capacity
1,25 l
Overall dimensions (W x D x H)
277 x 490 x 414 mm
Net weight
37 kg
Power supply requirement
230 V 50/60 Hz
Min. ambient temperature
5 °C
Max. ambient temperature
40 °C
Model
Ident. No.
UC 006 Unichiller (230 V 50 Hz)
! F or connecting 2 rotary evaporators to
one chiller.
3919000
Accessory for
RV 10 basic
RV 10 digital
RV 10 control
RV 10 System
FLEX packages
FLEX-ability with the new IKA® RV 10 FLEX Packages
The IKA® FLEX Packages enable the customer who requires speciality glassware the FLEX-ability of customizing their glassware setup for their
specific application.
RV 10 FLEX
Package
Description
RV 10 digital FLEX
RV 10 digital drive, HB 10 digital heating bath, RV 10.70 vapor tube NS 29/32, clamps for glassware, Woulff bottle
Ident. No.
8031500
RV 10 control FLEX
RV 10 control drive, HB 10 control heating bath, RV 10.70 vapor tube NS 29/32, clamps for glassware, Woulff bottle,
RV 10.4002 Magnetic valve laboratory vacuum
8031600
Only three steps to configure your personalized rotary evaporator system:
Step 1
Choose your FLEX base model
+
Step 2
Select individual glassware:
- condenser
- evaporation flask
- receiving flask
! More information about IKA® Rotary Evaporators at www.ika.com/distilling.
=
Step 3
Configured RV 10 FLEX Package
with selected glassware
17
Thank you for reading this data sheet.
For pricing or for further information, please contact us at our UK Office, using the details
below.
UK Office
Keison Products,
P.O. Box 2124, Chelmsford, Essex, CM1 3UP, England.
Tel: +44 (0)1245 600560
Fax: +44 (0)1245 808399
Email: [email protected]
Please note - Product designs and specifications are subject to change without notice. The user is responsible for determining the
suitability of this product.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement