AR-EXPL11 2011 Civilian Explorer Console Installation Instructions

AR-EXPL11 2011 Civilian Explorer Console Installation Instructions
Rev. 0511
AR-EXPL11 2011 Civilian Explorer
Console Installation Instructions
1: Carefully loosen factory console top and side plastic trim pieces.
2: Unsnap and remove the 2 front latching mechanism pieces.
3: Unscrew sensor from bottom of inner carpeted liner and remove inner liner leaving
sensor at the bottom of the well. (Secure sensor to bottom of well with supplied Velcro.)
4: Unscrew and remove the factory armrest.
5: Set Lund console over armrest well and secure with (2) factory screws in front &
(2) supplied 8-32 x 21/2” screws in the back.
Remove tab if needed for
Equipment clearance
Factory mounting screws
Supplied mounting screws
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement