PA- 1000/ 2000
PA-1000/PA-2000
Professional Stereo Power Amplifiers
Show blue angle front shot
Features:
>2 / 4 / 8 Ohm stable operation
>Ultra light weight & reliable
>High damping factor provides superior cone control
>Variable speed ultra-quiet cooling fan
>Power ready, Signal Present, Clip & Protect LED indicators
>Stepped Front panel level controls
>Switched soft knee clip limiters
>Switchable stereo, parallel and bridge modes
>Soft start in-rush current limiting
>Input via 1/4’’TRS and XLR connectors
>Speaker outputs via Speakon® connectors & HD binding posts
Specifications:
Rated Power
+/- 5%
PA-1000
8 Ohms Stereo RMS
4 Ohms Stereo RMS
2 Ohms Stereo EIA
8 Ohms Bridged
4 Ohms Bridged
Input Sensitivity (limiter Off)
Input Impedance
Frequency Response
Voltage Gain
THD + N
S/N Ratio
Crosstalk
Damping Factor
1K @ 8 ohms
Amplifier Circuitry(SMPS)
Protection Circuitry
Warranty
Dimensions W x D x H
Racking Height (includes rack ears)
Shipping Weight
300W
500W
750W
PA-2000
600W
1000W
1500W
1000W
2000W
1500W
3000W
0.9-1.1V(+ 0/-1dBv)
20k ohms Balanced 10K ohms Unbalanced
20Hz – 20kHz (+ 0/- 1dB)
33 +/-0.5dB
37 +/- 0.5dB
<0.1%
>100dB
>70dB
>500
SMPS Class A/B
SMPS Class 2H
Short circuit, open circuit, thermal, ultrasonic, RF, reactive/mismatched loads
on/off muting, crowbar
3 Years
19”/483mm x 18.1”/460mm x 3.49”/88.8mm
2U
19lb/9kg
24lb/11kg
Specifications are subject to change without notice www.factorelectronics.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement