Tutorialspoint Python Quick Guide

PYTHON QUICK GUIDE
http://www.tutorialspoint.com/python/python_quick_guide.htm
Copyright © tutorialspoint.com
PYTHON OVERVIEW:
Python is a high-level, interpreted, interactive and object oriented-scripting language.
Python is Interpreted
Python is Interactive
Python is Object-Oriented
Python is Beginner's Language
Python was developed by Guido van Rossum in the late eighties and early nineties at the National
Research Institute for Mathematics and Computer Science in the Netherlands.
Python's feature highlights include:
Easy-to-learn
Easy-to-read
Easy-to-maintain
A broad standard library
Interactive Mode
Portable
Extendable
Databases
GUI Programming
Scalable
GETTING PYTHON:
The most up-to-date and current source code, binaries, documentation, news, etc. is available at
the official website of Python:
Python Official Website : http://www.python.org/
You can download the Python documentation from the following site. The documentation is
available in HTML, PDF, and PostScript formats.
Python Documentation Website : www.python.org/doc/
FIRST PYTHON PROGRAM:
Interactive Mode Programming:
Invoking the interpreter without passing a script file as a parameter brings up the following
prompt:
root# python
Python 2.5 (r25:51908, Nov 6 2007, 16:54:01)
[GCC 4.1.2 20070925 (Red Hat 4.1.2-27)] on linux2
Type "help", "copyright", "credits" or "license" for more info.
>>>
Type the following text to the right of the Python prompt and press the Enter key:
>>> print "Hello, Python!";
This will produce following result:
Hello, Python!
PYTHON IDENTIFIERS:
A Python identifier is a name used to identify a variable, function, class, module, or other object.
An identifier starts with a letter A to Z or a to z or an underscore (_) followed by zero or more
letters, underscores, and digits (0 to 9).
Python does not allow punctuation characters such as @, $, and % within identifiers. Python is a
case sensitive programming language. Thus Manpower and manpower are two different
identifiers in Python.
Here are following identifier naming convention for Python:
Class names start with an uppercase letter and all other identifiers with a lowercase letter.
Starting an identifier with a single leading underscore indicates by convention that the
identifier is meant to be private.
Starting an identifier with two leading underscores indicates a strongly private identifier.
If the identifier also ends with two trailing underscores, the identifier is a language-defined
special name.
RESERVED WORDS:
The following list shows the reserved words in Python. These reserved words may not be used as
constant or variable or any other identifier names.
and
exec
not
assert
finally
or
break
for
pass
class
from
print
continue
global
raise
def
if
return
del
import
try
elif
in
while
else
is
with
except
lambda
yield
LINES AND INDENTATION:
One of the first caveats programmers encounter when learning Python is the fact that there are no
braces to indicate blocks of code for class and function definitions or flow control. Blocks of code
are denoted by line indentation, which is rigidly enforced.
The number of spaces in the indentation is variable, but all statements within the block must be
indented the same amount. Both blocks in this example are fine:
if True:
print "True"
else:
print "False"
However, the second block in this example will generate an error:
if True:
print "Answer"
print "True"
else:
print "Answer"
print "False"
MULTI-LINE STATEMENTS:
Statements in Python typically end with a new line. Python does, however, allow the use of the line
continuation character (\) to denote that the line should continue. For example:
total = item_one + \
item_two + \
item_three
Statements contained within the [], {}, or () brackets do not need to use the line continuation
character. For example:
days = ['Monday', 'Tuesday', 'Wednesday',
'Thursday', 'Friday']
QUOTATION IN PYTHON:
Python accepts single ('), double (") and triple (''' or """) quotes to denote string literals, as long as
the same type of quote starts and ends the string.
The triple quotes can be used to span the string across multiple lines. For example, all the
following are legal:
word = 'word'
sentence = "This is a sentence."
paragraph = """This is a paragraph. It is
made up of multiple lines and sentences."""
COMMENTS IN PYTHON:
A hash sign (#) that is not inside a string literal begins a comment. All characters after the # and
up to the physical line end are part of the comment, and the Python interpreter ignores them.
#!/usr/bin/python
# First comment
print "Hello, Python!";
# second comment
This will produce following result:
Hello, Python!
A comment may be on the same line after a statement or expression:
name = "Madisetti" # This is again comment
You can comment multiple lines as follows:
#
#
#
#
This is a comment.
This is a comment, too.
This is a comment, too.
I said that already.
USING BLANK LINES:
A line containing only whitespace, possibly with a comment, is known as a blank line, and Python
totally ignores it.
In an interactive interpreter session, you must enter an empty physical line to terminate a multiline
statement.
MULTIPLE STATEMENTS ON A SINGLE LINE:
The semicolon ( ; ) allows multiple statements on the single line given that neither statement starts
a new code block. Here is a sample snip using the semicolon:
import sys; x = 'foo'; sys.stdout.write(x + '\n')
MULTIPLE STATEMENT GROUPS AS SUITES:
Groups of individual statements making up a single code block are called suites in Python.
Compound or complex statements, such as if, while, def, and class, are those which require a
header line and a suite.
Header lines begin the statement (with the keyword) and terminate with a colon ( : ) and are
followed by one or more lines which make up the suite.
Example:
if expression :
suite
elif expression :
suite
else :
suite
PYTHON - VARIABLE TYPES:
Variables are nothing but reserved memory locations to store values. This means that when you
create a variable you reserve some space in memory.
Based on the data type of a variable, the interpreter allocates memory and decides what can be
stored in the reserved memory. Therefore, by assigning different data types to variables, you can
store integers, decimals, or characters in these variables.
ASSIGNING VALUES TO VARIABLES:
The operand to the left of the = operator is the name of the variable, and the operand to the right
of the = operator is the value stored in the variable. For example:
counter = 100
miles
= 1000.0
name
= "John"
# An integer assignment
# A floating point
# A string
print counter
print miles
print name
STANDARD DATA TYPES:
Python has five standard data types:
Numbers
String
List
Tuple
Dictionary
PYTHON NUMBERS:
Number objects are created when you assign a value to them. For example:
var1 = 1
var2 = 10
Python supports four different numerical types:
int (signed integers)
long (long integers [can also be represented in octal and hexadecimal])
float (floating point real values)
complex (complex numbers)
Here are some examples of numbers:
int
long
float
complex
10
51924361L
0.0
3.14j
100
-0x19323L
15.20
45.j
-786
0122L
-21.9
9.322e-36j
080
0xDEFABCECBDAECBFBAEL
32.3+e18
.876j
-0490
535633629843L
-90.
-.6545+0J
-0x260
-052318172735L
-32.54e100
3e+26J
0x69
-4721885298529L
70.2-E12
4.53e-7j
PYTHON STRINGS:
Strings in Python are identified as a contiguous set of characters in between quotation marks.
Example:
str = 'Hello World!'
print str
# Prints complete string
print
print
print
print
print
str[0]
str[2:5]
str[2:]
str * 2
str + "TEST"
#
#
#
#
#
Prints
Prints
Prints
Prints
Prints
first character of the string
characters starting from 3rd to 6th
string starting from 3rd character
string two times
concatenated string
PYTHON LISTS:
Lists are the most versatile of Python's compound data types. A list contains items separated by
commas and enclosed within square brackets ([]).
#!/usr/bin/python
list = [ 'abcd', 786 , 2.23, 'john', 70.2 ]
tinylist = [123, 'john']
print
print
print
print
print
print
list
# Prints complete list
list[0]
# Prints first element of the list
list[1:3]
# Prints elements starting from 2nd to 4th
list[2:]
# Prints elements starting from 3rd element
tinylist * 2 # Prints list two times
list + tinylist # Prints concatenated lists
PYTHON TUPLES:
A tuple is another sequence data type that is similar to the list. A tuple consists of a number of
values separated by commas. Unlike lists, however, tuples are enclosed within parentheses.
Tuples can be thought of as read-only lists.
tuple = ( 'abcd', 786 , 2.23, 'john', 70.2
tinytuple = (123, 'john')
print
print
print
print
print
print
)
tuple
# Prints complete list
tuple[0]
# Prints first element of the list
tuple[1:3]
# Prints elements starting from 2nd to 4th
tuple[2:]
# Prints elements starting from 3rd element
tinytuple * 2
# Prints list two times
tuple + tinytuple # Prints concatenated lists
PYTHON DICTIONARY:
Python 's dictionaries are hash table type. They work like associative arrays or hashes found in Perl
and consist of key-value pairs.
tinydict = {'name': 'john','code':6734, 'dept': 'sales'}
print dict['one']
# Prints value for 'one' key
print dict[2]
# Prints value for 2 key
print tinydict
# Prints complete dictionary
print tinydict.keys()
# Prints all the keys
print tinydict.values() # Prints all the values
PYTHON - BASIC OPERATORS:
Operator
Description
Example
+
Addition - Adds values on either side of the
operator
a + b will give 30
-
Subtraction - Subtracts right hand operand from
left hand operand
a - b will give -10
*
Multiplication - Multiplies values on either side of
the operator
a * b will give 200
/
Division - Divides left hand operand by right
hand operand
b / a will give 2
%
Modulus - Divides left hand operand by right
hand operand and returns remainder
b % a will give 0
**
Exponent - Performs exponential (power)
calculation on operators
a**b will give 10 to the power 20
//
Floor Division - The division of operands where
the result is the quotient in which the digits after
the decimal point are removed.
9//2 is equal to 4 and 9.0//2.0 is
equal to 4.0
==
Checks if the value of two operands are equal or
not, if yes then condition becomes true.
(a == b) is not true.
!=
Checks if the value of two operands are equal or
not, if values are not equal then condition
becomes true.
(a != b) is true.
<>
Checks if the value of two operands are equal or
not, if values are not equal then condition
becomes true.
(a <> b) is true. This is similar to
!= operator.
>
Checks if the value of left operand is greater
than the value of right operand, if yes then
condition becomes true.
(a > b) is not true.
<
Checks if the value of left operand is less than
the value of right operand, if yes then condition
becomes true.
(a < b) is true.
>=
Checks if the value of left operand is greater
than or equal to the value of right operand, if yes
then condition becomes true.
(a >= b) is not true.
<=
Checks if the value of left operand is less than or
equal to the value of right operand, if yes then
condition becomes true.
(a <= b) is true.
=
Simple assignment operator, Assigns values
from right side operands to left side operand
c = a + b will assigne value of a
+ b into c
+=
Add AND assignment operator, It adds right
operand to the left operand and assign the result
to left operand
c += a is equivalent to c = c + a
-=
Subtract AND assignment operator, It subtracts
right operand from the left operand and assign
the result to left operand
c -= a is equivalent to c = c - a
*=
Multiply AND assignment operator, It multiplies
right operand with the left operand and assign
the result to left operand
c *= a is equivalent to c = c * a
/=
Divide AND assignment operator, It divides left
operand with the right operand and assign the
result to left operand
c /= a is equivalent to c = c / a
%=
Modulus AND assignment operator, It takes
modulus using two operands and assign the
result to left operand
c %= a is equivalent to c = c %
a
**=
Exponent AND assignment operator, Performs
c **= a is equivalent to c = c **
exponential (power) calculation on operators
and assign value to the left operand
a
//=
Floor Dividion and assigns a value, Performs
floor division on operators and assign value to
the left operand
c //= a is equivalent to c = c // a
&
Binary AND Operator copies a bit to the result if it
exists in both operands.
(a & b) will give 12 which is 0000
1100
|
Binary OR Operator copies a bit if it exists in
eather operand.
(a | b) will give 61 which is 0011
1101
^
Binary XOR Operator copies the bit if it is set in
one operand but not both.
(a ^ b) will give 49 which is
0011 0001
~
Binary Ones Complement Operator is unary and
has the efect of 'flipping' bits.
(~a ) will give -61 which is 1100
0011 in 2's complement form
due to a signed binary number.
<<
Binary Left Shift Operator. The left operands
value is moved left by the number of bits
specified by the right operand.
a << 2 will give 240 which is
1111 0000
>>
Binary Right Shift Operator. The left operands
value is moved right by the number of bits
specified by the right operand.
a >> 2 will give 15 which is
0000 1111
and
Called Logical AND operator. If both the
operands are true then then condition becomes
true.
(a and b) is true.
or
Called Logical OR Operator. If any of the two
operands are non zero then then condition
becomes true.
(a or b) is true.
not
Called Logical NOT Operator. Use to reverses the
logical state of its operand. If a condition is true
then Logical NOT operator will make false.
not(a && b) is false.
in
Evaluates to true if it finds a variable in the
specified sequence and false otherwise.
x in y, here in results in a 1 if x
is a member of sequence y.
not in
Evaluates to true if it does not finds a variable in
the specified sequence and false otherwise.
x not in y, here not in results in
a 1 if x is not a member of
sequence y.
is
Evaluates to true if the variables on either side of
the operator point to the same object and false
otherwise.
x is y, here is results in 1 if id(x)
equals id(y).
is not
Evaluates to false if the variables on either side
of the operator point to the same object and true
otherwise.
x is not y, here is not results in
1 if id(x) is not equal to id(y).
PYTHON OPERATORS PRECEDENCE
The following table lists all operators from highest precedence to lowest.
Operator
Description
**
Exponentiation (raise to the power)
~+-
Ccomplement, unary plus and minus (method names for the
last two are +@ and -@)
* / % //
Multiply, divide, modulo and floor division
+-
Addition and subtraction
>> <<
Right and left bitwise shift
&
Bitwise 'AND'
^|
Bitwise exclusive `OR' and regular `OR'
<= < > >=
Comparison operators
<> == !=
Equality operators
= %= /= //= -= += |= &= >>=
<<= *= **=
Assignment operators
is is not
Identity operators
in not in
Membership operators
note or and
Logical operators
THE IF STATEMENT:
The syntax of the if statement is:
if expression:
statement(s)
THE ELSE STATEMENT:
The syntax of the if...else statement is:
if expression:
statement(s)
else:
statement(s)
THE ELIF STATEMENT
The syntax of the if...elif statement is:
if expression1:
statement(s)
elif expression2:
statement(s)
elif expression3:
statement(s)
else:
statement(s)
THE NESTED IF...ELIF...ELSE CONSTRUCT
The syntax of the nested if...elif...else construct may be:
if expression1:
statement(s)
if expression2:
statement(s)
elif expression3:
statement(s)
else
statement(s)
elif expression4:
statement(s)
else:
statement(s)
THE WHILE LOOP:
The syntax of the while look is:
while expression:
statement(s)
THE INFINITE LOOPS:
You must use caution when using while loops because of the possibility that this condition never
resolves to a false value. This results in a loop that never ends. Such a loop is called an infinite
loop.
An infinite loop might be useful in client/server programming where the server needs to run
continuously so that client programs can communicate with it as and when required.
SINGLE STATEMENT SUITES:
Similar to the if statement syntax, if your while clause consists only of a single statement, it may
be placed on the same line as the while header.
Here is an example of a one-line while clause:
while expression : statement
THE FOR LOOP:
The syntax of the loop look is:
for iterating_var in sequence:
statements(s)
ITERATING BY SEQUENCE INDEX:
An alternative way of iterating through each item is by index offset into the sequence itself:
fruits = ['banana', 'apple', 'mango']
for index in range(len(fruits)):
print 'Current fruit :', fruits[index]
print "Good bye!"
THE BREAK STATEMENT:
The break statement in Python terminates the current loop and resumes execution at the next
statement, just like the traditional break found in C.
The most common use for break is when some external condition is triggered requiring a hasty
exit from a loop. The break statement can be used in both while and for loops.
for letter in 'Python':
if letter == 'h':
# First Example
break
print 'Current Letter :', letter
var = 10
# Second Example
while var > 0:
print 'Current variable value :', var
var = var -1
if var == 5:
break
print "Good bye!"
THE CONTINUE STATEMENT:
The continue statement in Python returns the control to the beginning of the while loop. The
continue statement rejects all the remaining statements in the current iteration of the loop and
moves the control back to the top of the loop.
The continue statement can be used in both while and for loops.
for letter in 'Python':
# First Example
if letter == 'h':
continue
print 'Current Letter :', letter
var = 10
# Second Example
while var > 0:
print 'Current variable value :', var
var = var -1
if var == 5:
continue
print "Good bye!"
THE ELSE STATEMENT USED WITH LOOPS
Python supports to have an else statement associated with a loop statements.
If the else statement is used with a for loop, the else statement is executed when the loop
has exhausted iterating the list.
If the else statement is used with a while loop, the else statement is executed when the
condition becomes false.
THE PASS STATEMENT:
The pass statement in Python is used when a statement is required syntactically but you do not
want any command or code to execute.
The pass statement is a null operation; nothing happens when it executes. The pass is also useful
in places where your code will eventually go, but has not been written yet (e.g., in stubs for
example):
#!/usr/bin/python
for letter in 'Python':
if letter == 'h':
pass
print 'This is pass block'
print 'Current Letter :', letter
print "Good bye!"
DEFINING A FUNCTION
You can define functions to provide the required functionality. Here are simple rules to define a
function in Python:
Function blocks begin with the keyword def followed by the function name and parentheses (
( ) ).
Any input parameters or arguments should be placed within these parentheses. You can also
define parameters inside these parentheses.
The first statement of a function can be an optional statement - the documentation string of
the function or docstring.
The code block within every function starts with a colon (:) and is indented.
The statement return [expression] exits a function, optionally passing back an expression to
the caller. A return statement with no arguments is the same as return None.
Syntax:
def functionname( parameters ):
"function_docstring"
function_suite
return [expression]
By default, parameters have a positional behavior, and you need to inform them in the same order
that they were defined.
Example:
Here is the simplest form of a Python function. This function takes a string as input parameter and
prints it on standard screen.
def printme( str ):
"This prints a passed string into this function"
print str
return
CALLING A FUNCTION
Defining a function only gives it a name, specifies the parameters that are to be included in the
function, and structures the blocks of code.
Once the basic structure of a function is finalized, you can execute it by calling it from another
function or directly from the Python prompt.
Following is the example to call printme() function:
#!/usr/bin/python
# Function definition is here
def printme( str ):
"This prints a passed string into this function"
print str;
return;
# Now you can call printme function
printme("I'm first call to user defined function!");
printme("Again second call to the same function");
This would produce following result:
I'm first call to user defined function!
Again second call to the same function
PYTHON - MODULES:
A module allows you to logically organize your Python code. Grouping related code into a module
makes the code easier to understand and use.
A module is a Python object with arbitrarily named attributes that you can bind and reference.
Simply, a module is a file consisting of Python code. A module can define functions, classes, and
variables. A module can also include runnable code.
Example:
The Python code for a module named aname normally resides in a file named aname.py. Here's
an example of a simple module, hello.py
def print_func( par ):
print "Hello : ", par
return
THE IMPORT STATEMENT:
You can use any Python source file as a module by executing an import statement in some other
Python source file. import has the following syntax:
import module1[, module2[,... moduleN]
When the interpreter encounters an import statement, it imports the module if the module is
present in the search path. A search path is a list of directories that the interpreter searches before
importing a module.
Example:
To import the module hello.py, you need to put the following command at the top of the script:
#!/usr/bin/python
# Import module hello
import hello
# Now you can call defined function that module as follows
hello.print_func("Zara")
This would produce following result:
Hello : Zara
A module is loaded only once, regardless of the number of times it is imported. This prevents the
module execution from happening over and over again if multiple imports occur.
OPENING AND CLOSING FILES:
The open Function:
Before you can read or write a file, you have to open it using Python's built-in open() function. This
function creates a file object which would be utilized to call other support methods associated with
it.
Syntax:
file object = open(file_name [, access_mode][, buffering])
Here is paramters detail:
file_name: The file_name argument is a string value that contains the name of the file that
you want to access.
access_mode: The access_mode determines the mode in which the file has to be opened ie.
read, write append etc. A complete list of possible values is given below in the table. This is
optional parameter and the default file access mode is read (r)
buffering: If the buffering value is set to 0, no buffering will take place. If the buffering value
is 1, line buffering will be performed while accessing a file. If you specify the buffering value
as an integer greater than 1, then buffering action will be performed with the indicated
buffer size. This is optional paramter.
Here is a list of the different modes of opening a file:
Modes
Description
r
Opens a file for reading only. The file pointer is placed at the beginning of the file. This
is the default mode.
rb
Opens a file for reading only in binary format. The file pointer is placed at the
beginning of the file. This is the default mode.
r+
Opens a file for both reading and writing. The file pointer will be at the beginning of the
file.
rb+
Opens a file for both reading and writing in binary format. The file pointer will be at the
beginning of the file.
w
Opens a file for writing only. Overwrites the file if the file exists. If the file does not
exist, creates a new file for writing.
wb
Opens a file for writing only in binary format. Overwrites the file if the file exists. If the
file does not exist, creates a new file for writing.
w+
Opens a file for both writing and reading. Overwrites the existing file if the file exists. If
the file does not exist, creates a new file for reading and writing.
wb+
Opens a file for both writing and reading in binary format. Overwrites the existing file if
the file exists. If the file does not exist, creates a new file for reading and writing.
a
Opens a file for appending. The file pointer is at the end of the file if the file exists. That
is, the file is in the append mode. If the file does not exist, it creates a new file for
writing.
ab
Opens a file for appending in binary format. The file pointer is at the end of the file if
the file exists. That is, the file is in the append mode. If the file does not exist, it creates
a new file for writing.
a+
Opens a file for both appending and reading. The file pointer is at the end of the file if
the file exists. The file opens in the append mode. If the file does not exist, it creates a
new file for reading and writing.
ab+
Opens a file for both appending and reading in binary format. The file pointer is at the
end of the file if the file exists. The file opens in the append mode. If the file does not
exist, it creates a new file for reading and writing.
The file object atrributes:
Once a file is opened and you have one file object, you can get various information related to that
file.
Here is a list of all attributes related to file object:
Attribute
Description
file.closed
Returns true if file is closed, false otherwise.
file.mode
Returns access mode with which file was opened.
file.name
Returns name of the file.
file.softspace
Returns false if space explicitly required with print, true otherwise.
The close() Method:
The close() method of a file object flushes any unwritten information and closes the file object,
after which no more writing can be done.
fileObject.close();
READING AND WRITING FILES:
The write() Method:
Syntax:
fileObject.write(string);
The read() Method:
Syntax:
fileObject.read([count]);
FILE POSITIONS:
The tell() method tells you the current position within the file in other words, the next read or write
will occur at that many bytes from the beginning of the file:
The seek(offset[, from]) method changes the current file position. The offset argument indicates
the number of bytes to be moved. The from argument specifies the reference position from where
the bytes are to be moved.
If from is set to 0, it means use the beginning of the file as the reference position and 1 means use
the current position as the reference position and if it is set to 2 then the end of the file would be
taken as the reference position.
RENAMING AND DELETING FILES:
Syntax:
os.rename(current_file_name, new_file_name)
The remove() Method:
Syntax:
os.remove(file_name)
DIRECTORIES IN PYTHON:
The mkdir() Method:
You can use the mkdir() method of the os module to create directories in the current directory. You
need to supply an argument to this method, which contains the name of the directory to be
created.
Syntax:
os.mkdir("newdir")
The chdir() Method:
You can use the chdir() method to change the current directory. The chdir() method takes an
argument, which is the name of the directory that you want to make the current directory.
Syntax:
os.chdir("newdir")
The getcwd() Method:
The getcwd() method displays the current working directory.
Syntax:
os.getcwd()
The rmdir() Method:
The rmdir() method deletes the directory, which is passed as an argument in the method.
Before removing a directory, all the contents in it should be removed.
Syntax:
os.rmdir('dirname')
HANDLING AN EXCEPTION:
If you have some suspicious code that may raise an exception, you can defend your program by
placing the suspicious code in a try: block. After the try: block, include an except: statement,
followed by a block of code which handles the problem as elegantly as possible.
Syntax:
Here is simple syntax of try....except...else blocks:
try:
Do you operations here;
......................
except ExceptionI:
If there is ExceptionI, then execute this block.
except ExceptionII:
If there is ExceptionII, then execute this block.
......................
else:
If there is no exception then execute this block.
Here are few important points about the above mentioned syntax:
A single try statement can have multiple except statements. This is useful when the try block
contains statements that may throw different types of exceptions.
You can also provide a generic except clause, which handles any exception.
After the except clause(s), you can include an else-clause. The code in the else-block
executes if the code in the try: block does not raise an exception.
The else-block is a good place for code that does not need the try: block's protection.
THE EXCEPT CLAUSE WITH NO EXCEPTIONS:
You can also use the except statement with no exceptions defined as follows:
try:
Do you operations here;
......................
except:
If there is any exception, then execute this block.
......................
else:
If there is no exception then execute this block.
THE EXCEPT CLAUSE WITH MULTIPLE EXCEPTIONS:
You can also use the same except statement to handle multiple exceptions as follows:
try:
Do you operations here;
......................
except(Exception1[, Exception2[,...ExceptionN]]]):
If there is any exception from the given exception list,
then execute this block.
......................
else:
If there is no exception then execute this block.
STANDARD EXCEPTIONS:
Here is a list standard Exceptions available in Python: Standard Exceptions
THE TRY-FINALLY CLAUSE:
You can use a finally: block along with a try: block. The finally block is a place to put any code
that must execute, whether the try-block raised an exception or not. The syntax of the try-finally
statement is this:
try:
Do you operations here;
......................
Due to any exception, this may be skipped.
finally:
This would always be executed.
......................
ARGUMENT OF AN EXCEPTION:
An exception can have an argument, which is a value that gives additional information about the
problem. The contents of the argument vary by exception. You capture an exception's argument
by supplying a variable in the except clause as follows:
try:
Do you operations here;
......................
except ExceptionType, Argument:
You can print value of Argument here...
RAISING AN EXCEPTIONS:
You can raise exceptions in several ways by using the raise statement. The general syntax for the
raise statement.
Syntax:
raise [Exception [, args [, traceback]]]
USER-DEFINED EXCEPTIONS:
Python also allows you to create your own exceptions by deriving classes from the standard built-in
exceptions.
Here is an example related to RuntimeError. Here a class is created that is subclassed from
RuntimeError. This is useful when you need to display more specific information when an
exception is caught.
In the try block, the user-defined exception is raised and caught in the except block. The variable e
is used to create an instance of the class Networkerror.
class Networkerror(RuntimeError):
def __init__(self, arg):
self.args = arg
So once you defined above class, you can raise your exception as follows:
try:
raise Networkerror("Bad hostname")
except Networkerror,e:
print e.args
CREATING CLASSES:
The class statement creates a new class definition. The name of the class immediately follows the
keyword class followed by a colon as follows:
class ClassName:
'Optional class documentation string'
class_suite
The class has a documentation string which can be access via ClassName.__doc__.
The class_suite consists of all the component statements, defining class members, data
attributes, and functions.
CREATING INSTANCE OBJECTS:
To create instances of a class, you call the class using class name and pass in whatever arguments
its __init__ method accepts.
"This would create first object of Employee class"
emp1 = Employee("Zara", 2000)
"This would create second object of Employee class"
emp2 = Employee("Manni", 5000)
ACCESSING ATTRIBUTES:
You access the object's attributes using the dot operator with object. Class variable would be
accessed using class name as follows:
emp1.displayEmployee()
emp2.displayEmployee()
print "Total Employee %d" % Employee.empCount
BUILT-IN CLASS ATTRIBUTES:
Every Python class keeps following built-in attributes and they can be accessed using dot operator
like any other attribute:
__dict__ : Dictionary containing the class's namespace.
__doc__ : Class documentation string, or None if undefined.
__name__: Class name.
__module__: Module name in which the class is defined. This attribute is "__main__" in
interactive mode.
__bases__ : A possibly empty tuple containing the base classes, in the order of their
occurrence in the base class list.
DESTROYING OBJECTS (GARBAGE COLLECTION):
Python deletes unneeded objects (built-in types or class instances) automatically to free memory
space. The process by which Python periodically reclaims blocks of memory that no longer are in
use is termed garbage collection.
Python's garbage collector runs during program execution and is triggered when an object's
reference count reaches zero. An object's reference count changes as the number of aliases that
point to it changes:
An object's reference count increases when it's assigned a new name or placed in a container (list,
tuple, or dictionary). The object's reference count decreases when it's deleted with del, its
reference is reassigned, or its reference goes out of scope. When an object's reference count
reaches zero, Python collects it automatically.
CLASS INHERITANCE:
Instead of starting from scratch, you can create a class by deriving it from a preexisting class by
listing the parent class in parentheses after the new class name:
The child class inherits the attributes of its parent class, and you can use those attributes as if they
were defined in the child class. A child class can also override data members and methods from
the parent.
Syntax:
Derived classes are declared much like their parent class; however, a list of base classes to inherit
from are given after the class name:
class SubClassName (ParentClass1[, ParentClass2, ...]):
'Optional class documentation string'
class_suite
OVERRIDING METHODS:
You can always override your parent class methods. One reason for overriding parent's methods is
because you may want special or different functionality in your subclass.
class Parent:
# define parent class
def myMethod(self):
print 'Calling parent method'
class Child(Parent): # define child class
def myMethod(self):
print 'Calling child method'
c = Child()
c.myMethod()
# instance of child
# child calls overridden method
BASE OVERLOADING METHODS:
Following table lists some generic functionality that you can override in your own classes:
SN
Method, Description & Sample Call
1
__init__ ( self [,args...] )
Constructor (with any optional arguments)
Sample Call : obj = className(args)
2
__del__( self )
Destructor, deletes an object
Sample Call : dell obj
3
__repr__( self )
Evaluatable string representation
Sample Call : repr(obj)
4
__str__( self )
Printable string representation
Sample Call : str(obj)
5
__cmp__ ( self, x )
Object comparison
Sample Call : cmp(obj, x)
OVERLOADING OPERATORS:
Suppose you've created a Vector class to represent two-dimensional vectors. What happens when
you use the plus operator to add them? Most likely Python will yell at you.
You could, however, define the __add__ method in your class to perform vector addition, and then
the plus operator would behave as per expectation:
#!/usr/bin/python
class Vector:
def __init__(self, a, b):
self.a = a
self.b = b
def __str__(self):
return 'Vector (%d, %d)' % (self.a, self.b)
def __add__(self,other):
return Vector(self.a + other.a, self.b + other.b)
v1 = Vector(2,10)
v2 = Vector(5,-2)
print v1 + v2
DATA HIDING:
An object's attributes may or may not be visible outside the class definition. For these cases, you
can name attributes with a double underscore prefix, and those attributes will not be directly
visible to outsiders:
#!/usr/bin/python
class JustCounter:
__secretCount = 0
def count(self):
self.__secretCount += 1
print self.__secretCount
counter = JustCounter()
counter.count()
counter.count()
print counter.__secretCount
A regular expression is a special sequence of characters that helps you match or find other strings
or sets of strings, using a specialized syntax held in a pattern. Regular expressions are widely used
in UNIX world.
The module re provides full support for Perl-like regular expressions in Python. The re module
raises the exception re.error if an error occurs while compiling or using a regular expression.
We would cover two important functions which would be used to handle regular expressions. But a
small thing first: There are various characters which would have special meaning when they are
used in regular expression. To avoid any confusion while dealing with regular expressions we
would use Raw Strings as r'expression'.
THE MATCH FUNCTION
This function attempts to match RE pattern to string with optional flags.
Here is the syntax for this function:
re.match(pattern, string, flags=0)
Here is the description of the parameters:
Parameter
Description
pattern
This is the regular expression to be matched.
string
This is the string which would be searched to match the pattern
flags
You can specifiy different flags using exclusive OR (|). These are
modifiers which are listed in the table below.
The re.match function returns a match object on success, None on failure. We would use
group(num) or groups() function of match object to get matched expression.
Match Object Methods
Description
group(num=0)
This methods returns entire match (or specific subgroup num)
groups()
This method return all matching subgroups in a tuple (empty if
there weren't any)
THE SEARCH FUNCTION
This function search for first occurrence of RE pattern within string with optional flags.
Here is the syntax for this function:
re.string(pattern, string, flags=0)
Here is the description of the parameters:
Parameter
Description
pattern
This is the regular expression to be matched.
string
This is the string which would be searched to match the pattern
flags
You can specifiy different flags using exclusive OR (|). These are
modifiers which are listed in the table below.
The re.search function returns a match object on success, None on failure. We would use
group(num) or groups() function of match object to get matched expression.
Match Object Methods
Description
group(num=0)
This methods returns entire match (or specific subgroup num)
groups()
This method return all matching subgroups in a tuple (empty if
there weren't any)
MATCHING VS SEARCHING:
Python offers two different primitive operations based on regular expressions: match checks for a
match only at the beginning of the string, while search checks for a match anywhere in the string
(this is what Perl does by default).
SEARCH AND REPLACE:
Some of the most important re methods that use regular expressions is sub.
Syntax:
sub(pattern, repl, string, max=0)
This method replace all occurrences of the RE pattern in string with repl, substituting all
occurrences unless max provided. This method would return modified string.
REGULAR-EXPRESSION MODIFIERS - OPTION FLAGS
Regular expression literals may include an optional modifier to control various aspects of
matching. The modifier are specified as an optional flag. You can provide multiple modified using
exclusive OR (|), as shown previously and may be represented by one of these:
Modifier
Description
re.I
Performs case-insensitive matching.
re.L
Interprets words according to the current locale.This interpretation affects the
alphabetic group (\w and \W), as well as word boundary behavior (\b and \B).
re.M
Makes $ match the end of a line (not just the end of the string) and makes ^ match
the start of any line (not just the start of the string).
re.S
Makes a period (dot) match any character, including a newline.
re.U
Interprets letters according to the Unicode character set. This flag affects the
behavior of \w, \W, \b, \B.
re.X
Permits "cuter" regular expression syntax. It ignores whitespace (except inside a set
[] or when escaped by a backslash), and treats unescaped # as a comment marker.
REGULAR-EXPRESSION PATTERNS:
Except for control characters, (+ ? . * ^ $ ( ) [ ] { } | \), all characters match themselves. You
can escape a control character by preceding it with a backslash.
Following table lists the regular expression syntax that is available in Python.
Pattern
Description
^
Matches beginning of line.
$
Matches end of line.
.
Matches any single character except newline. Using m option allows it
to match newline as well.
[...]
Matches any single character in brackets.
[^...]
Matches any single character not in brackets
re*
Matches 0 or more occurrences of preceding expression.
re+
Matches 0 or 1 occurrence of preceding expression.
re{ n}
Matches exactly n number of occurrences of preceding expression.
re{ n,}
Matches n or more occurrences of preceding expression.
re{ n, m}
Matches at least n and at most m occurrences of preceding expression.
a| b
Matches either a or b.
(re)
Groups regular expressions and remembers matched text.
(?imx)
Temporarily toggles on i, m, or x options within a regular expression. If
in parentheses, only that area is affected.
(?-imx)
Temporarily toggles off i, m, or x options within a regular expression. If
in parentheses, only that area is affected.
(?: re)
Groups regular expressions without remembering matched text.
(?imx: re)
Temporarily toggles on i, m, or x options within parentheses.
(?-imx: re)
Temporarily toggles off i, m, or x options within parentheses.
(?#...)
Comment.
(?= re)
Specifies position using a pattern. Doesn't have a range.
(?! re)
Specifies position using pattern negation. Doesn't have a range.
(?> re)
Matches independent pattern without backtracking.
\w
Matches word characters.
\W
Matches nonword characters.
\s
Matches whitespace. Equivalent to [\t\n\r\f].
\S
Matches nonwhitespace.
\d
Matches digits. Equivalent to [0-9].
\D
Matches nondigits.
\A
Matches beginning of string.
\Z
Matches end of string. If a newline exists, it matches just before
newline.
\z
Matches end of string.
\G
Matches point where last match finished.
\b
Matches word boundaries when outside brackets. Matches backspace
(0x08) when inside brackets.
\B
Matches nonword boundaries.
\n, \t, etc.
Matches newlines, carriage returns, tabs, etc.
\1...\9
Matches nth grouped subexpression.
\10
Matches nth grouped subexpression if it matched already. Otherwise
refers to the octal representation of a character code.
REGULAR-EXPRESSION EXAMPLES:
Literal characters:
Example
Description
python
Match "python".
Character classes:
Example
Description
[Pp]ython
Match "Python" or "python"
rub[ye]
Match "ruby" or "rube"
[aeiou]
Match any one lowercase vowel
[0-9]
Match any digit; same as [0123456789]
[a-z]
Match any lowercase ASCII letter
[A-Z]
Match any uppercase ASCII letter
[a-zA-Z0-9]
Match any of the above
[^aeiou]
Match anything other than a lowercase vowel
[^0-9]
Match anything other than a digit
Special Character Classes:
Example
Description
.
Match any character except newline
\d
Match a digit: [0-9]
\D
Match a nondigit: [^0-9]
\s
Match a whitespace character: [ \t\r\n\f]
\S
Match nonwhitespace: [^ \t\r\n\f]
\w
Match a single word character: [A-Za-z0-9_]
\W
Match a nonword character: [^A-Za-z0-9_]
Repetition Cases:
Example
Description
ruby?
Match "rub" or "ruby": the y is optional
ruby*
Match "rub" plus 0 or more ys
ruby+
Match "rub" plus 1 or more ys
\d{3}
Match exactly 3 digits
\d{3,}
Match 3 or more digits
\d{3,5}
Match 3, 4, or 5 digits
Nongreedy repetition:
This matches the smallest number of repetitions:
Example
Description
<.*>
Greedy repetition: matches "<python>perl>"
<.*?>
Nongreedy: matches "<python>" in "<python>perl>"
Grouping with parentheses:
Example
Description
\D\d+
No group: + repeats \d
(\D\d)+
Grouped: + repeats \D\d pair
([Pp]ython(, )?)+
Match "Python", "Python, python, python", etc.
Backreferences:
This matches a previously matched group again:
Example
Description
([Pp])ython&\1ails
Match python&pails or Python&Pails
(['"])[^\1]*\1
Single or double-quoted string. \1 matches whatever the 1st group matched
. \2 matches whatever the 2nd group matched, etc.
Alternatives:
Example
Description
python|perl
Match "python" or "perl"
rub(y|le))
Match "ruby" or "ruble"
Python(!+|\?)
"Python" followed by one or more ! or one ?
Anchors:
This need to specify match position
Example
Description
^Python
Match "Python" at the start of a string or internal line
Python$
Match "Python" at the end of a string or line
\APython
Match "Python" at the start of a string
Python\Z
Match "Python" at the end of a string
\bPython\b
Match "Python" at a word boundary
\brub\B
\B is nonword boundary: match "rub" in "rube" and "ruby" but not alone
Python(?=!)
Match "Python", if followed by an exclamation point
Python(?!!)
Match "Python", if not followed by an exclamation point
Special syntax with parentheses:
Example
Description
R(?#comment)
Matches "R". All the rest is a comment
R(?i)uby
Case-insensitive while matching "uby"
R(?i:uby)
Same as above
rub(?:y|le))
Group only without creating \1 backreference
">