50281 2 ifs vr2100 series ds fin
IFS® Line / Fiber Transmission
Specifications
VR2100 Series
Video
Video Output:
1 volt pk-pk (AGC controlled)
Bandwidth:
5 Hz - 10 MHz
Differential Gain:
<5%
Phase:
<5°
IFS DualDifferential
Independent
AM Video
Tilt:
<1%
ReceiverSignal-to-Noise
with AGCRatio (SNR):
>55 dB at 10 dB Attn.
Wavelength
850 nm, Multimode
Receiver Sensitivity
1 μw (-30 dBm)
Transmitter Output
25 μw (-16 dBm)
Number Of Fibers
2
STANDARD FEATURES
OVERVIEW
Connectors
Optical:
ST
• AM Video
Power:
Terminal Block with
Screw Clamps
• NTSC, PAL, SECAM Compatible
AM video signals
in
one
module
on
two
independent
multimode
Video:
BNC (Gold Plated Center-Pin)
The IFS VR2100 Series dual video receiver detects two independent
• Automatic Resettable Fuses on all Power Lines
fiber optic cables. The module is ideal for smaller CCTV installations
ElectricaL
&
Mechanical
• Two Independent Receivers in One Module
and the rack mount version can be used to double the fixed video
Power:
• Can be Used to Double the Fixed Video Capacity of an R3
capacity of the
R3 rack for up to 28 independent video channels
Surface
Mount:
24 VAC
C.T. @ 200 mA
per card cage.
The receiver
utilizes automatic gain control
(AGC).
Card Cage
Rack:
From Rack
The receiver is compatible with the IFS VT1101M, VT1101M-AC,
• Full Range Automatic Gain Control (AGC)
Number of Rack Slots: 1
and VT1001 series
transmitters.
Plug-and-play designAutomatic
ensures
• Automatically
Maximizes
Current
Protection:
Resettable
Solid-State
CurrentContrast
Limiters
ease of installation
requiring
• No In-field Electrical or Optical Adjustments Required
Circuit
Board:no electrical or optical adjustments.
Meets IPC Standard
The receiver incorporates
power
and AGC status indicating LED’s
• Power and AGC Status Indicating LED’s to Monitor
Size (in./cm.)
(LxWxH)
Mount:
x 4.9 in
x 1.0 in., 10.7
x 12.5
x 2.5 cm
for monitoringSurface
proper system
operation. The module is7.0
available
System
Performance
Rack
Mount:
7.7
x
5.0
x
1.0
in.,
17.8
x
12.7
x 2.5 cm
either stand-alone or rack mount version.
• Full Color Compatibility
Shipping Weight:
< 2 lbs./0.9 kg
• Hot-Swappable Rack Modules
• Comprehensive Lifetime Warranty
Environmental
MTBF:
APPLICATION
EXAMPLES
Operating
Temp:
Storage Temp:
• CCTV (FixedRelative
Video) Humidity:
> 100,000 hours
-40° C to +74° C
-40° C to +85° C
0% to 95% (non-condensing)†
†May be extended to condensation conditions by adding suffix ‘–C’ to model number for conformal coating.
SYSTEM DESIGN
System Design
J
Video
(Coax)
VT1001
ifs
up to 2.5 miles
(4 km)
International
ifs
Fiber
Systems
Incorporated
203.426.1180
Video
Video
VR2100
(Coax)
International
Fiber
Systems
Incorporated
203.426.1180
2 Fibers
62.5/125μm MM
(Coax)
Video
(Coax)
n
interlogix.com
Description
Fibers Required
Optical Pwr. Budget
Max. Distance*
VR2100 Series
North America
T 855-286-8889
Latin America
T 561-998-6114
IFS Dual Independent AM Video Receiver with AGC
Ordering Information
Multimode 62.5/125µm**
Part Number
Description
Fibers Required
Optical Pwr. Budget
Max. Distance*
VR2100
Dual Video Receiver with AGC (850nm)
2
14 dB
2.5 miles (4 km)
VR2100 Series is compatible with:
VT1101M, VT1101-AC, AND VT1001
Series Transmitters
Accessories ♦
PS12VDC1.5A-U
Options
Add ‘-R3’ to Model Number for R3 Rack Mount - No Charge (Requires R3 Rack purchased separately)
12VDC, 1.5A Plug-in Power supply (110/220VAC) with Universal power plug adapter kit (Included)
*Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. **For 50/125 Fiber, subtract 4 dB from Optical Power Budget.
♦ All accessories are third party manufactured.
Specifications
Video
Video Output:
1 volt pk-pk (AGC controlled)
Bandwidth:
5 Hz - 10 MHz
Differential Gain:
<5%
Differential Phase:
<5°
Tilt:
<1%
Signal-to-Noise Ratio (SNR):
>55 dB at 10 dB Attn.
Wavelength
850 nm, Multimode
Receiver Sensitivity
1 µw (-30 dBm)
GE
Security
North America
T 888-GE-SECURITY
888-437-3287
F 503-691-7566
E [email protected]
Asia
T 852-2907-8108
F 852-2142-5063
Australia and New Zealand
T 613-9239-1200
F 613-9239-1299
25 µw (-16 dBm)
Europe
T 44-113-238-1668
F 44-113-253-8121
2
Latin America
T 305-593-4301
F 305-593-4300
Transmitter Output
Number Of Fibers
Connectors
Optical:
ST
Power:
Terminal Block with Screw Clamps
Video:
BNC (Gold Plated Center-Pin)
Electrical & Mechanical
Power:
Surface Mount:
24 VAC C.T. @ 200 mA
Rack:
From Rack
Number of Rack Slots
1
Current Protection:
Automatic Resettable Solid-State Current Limiters
Circuit Board:
Meets IPC Standard
gesecurity.com/ifs
Specifications subject to
change without notice
Agency Compliance
© 2008 General Electric Company
Complies
with
FDA Performance
All Rights
Reserved
Standard for Laser Products, Title 21,
Code of Federal Regulations, Subchapter J
Made in the USA
Complies with FDA Performance
Standard for Laser Products, Title 21,
Code of Federal Regulations, Subchapter J
Size (in./cm.) (LxWxH)
Surface Mount:
7.0 x 4.9 x 1.0 in., 10.7 x 12.5 x 2.5 cm
Rack Mount:
7.7 x 5.0 x 1.0 in., 17.8 x 12.7 x 2.5 cm
Shipping Weight:
< 2 lbs./0.9 kg
Environmental
MTBF:
> 100,000 hours
Operating Temp:
-40° C to +74° C
Storage Temp:
-40° C to +85° C
Relative Humidity:
0% to 95% (non-condensing)
Ordering Information
Part Number
D1010
interlogix.com
D1010WDMA✧
Multimode
D1010WDMB
62.5/125µm**
Specifications subject
to change without
notice.
D1020
© 2013 United Technologies Corporation
All rights
reserved.
D1030
Interlogix is part of UTC Building
& Industrial
Systems, ✧
Single Mode
D1030WDMA
a unit of United
Technologies Corporation.
9/125µm
D1030WDMB
Accessories♦
Options
De
RS
RS
RS
RS
RS
RS
RS
VR2100 Series
PS-12VDC 12 Volt DC Plu
PS-12VDC-230 12 Volt D
Add ‘-R3’ to Model Num
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement