DGTPKF datasheet
 DGTPKF: MICROCONTROLLER FOR INDUSTRIAL DOSAGE SYSTEMS WITH EXTENDED KEYBOARD
High performing microcontroller, for table or panel mounting; through simple programming of the parameters, it offers the possibility to manage single product dosage systems in loading or in unloading, or multiproduct dosages and mixtures.
MAIN FEATURES
●
●
●
●
●
●
●
●
●
●
DGTPKF: weight indicator/transmitter for industrial applications ●
●
●
●
DOSAGE CONFIGURATION
●
●
20­key numeric/fundtional waterproof keyboard: quick entry of the setpoints and the tare value. Highly efficient red LED display with 6 20­mm digits and 12 LEDs for showing active functions. Case for panel mounting. Front panel dimensions: 170x170mm. Drill template: 165x165mm. Fitted with bracket for use on table or wall mounting. A/D 24­bit sigma­delta conversion, up to 200 conv./sec. autoselect. Management of a weighing system from 1 to 4 channels (cells) with digital equalization. Connectable with up to 16 analogue load cells with 350 Ohm input resistance. Up to 1.000.000 displayable divisions with internal resolution up to 3.000.000 points. Calibration, Set­Up parameters, configurable from keyboard or from PC with DINI TOOLS. Up to 8 signal linearization points with DINITOOLS (3 from keypad). Time/Date Memory back­up for saving dosage data in case it’s accidentally turned off. Printing the dosage and consumption data. From 12 Vdc to 24 Vdc power supply. Fitted with 12 V switching power adapter. I/O SECTION
Available dosage functions: ●
●
●
Single product dosage in loading functioning ●
1 RS232/C bidirectional port configurable for connection to PC or external units. 1 RS232/C bidirectional port configurable for connection to printer. Six 150 mA 48 Vac / 150 mA 60 Vdc (NO) photomosfet outputs configurable according to the selected dosage function. 4 inputs (optoisolator photocouplers) configurable as: 12÷24 Vdc, 5 mA min ­ 20 mA max with functions dependent on the selected dosage function. OPTIONS AND ACCESSORIES
●
●
Single product dosage in unloading functioning Multi­product dosage functioning Printer for panel mounting Kit for panel installation Options only
at
of order
X system, with relative label of whole
barriers, connected to mechanical
ATEX CONFORMITY
connection cable, 5V power supply.
and printout formatting. NET
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement