ZERTIFIKAT CERTIFICATE No.: 968/EL 563.03/12 Product tested Motion Controller Q-Series consting of Base, Power Supply, PLC CPU, Motion CPU and Safety Signal unit Type designation Manufacturer see certificate holder Q3xDB, Q61P, Q62P, Q63P, Q64PN, QxUD(E)(H)CPU, Q172D(S)CPU, Q173D(S)CPU, Q173DSXY Codes and standards EN 61800-5-2:2007 forming the basis of EN ISO 13849-1:2008 + AC:2009 testing IEC 61508 Parts 1-7:1998 / 2000 Intended application Certificate holder Mitsubishi Electric Corporation Nagoya Works 1-14 Yada-Minami 5-chome Higashi-ku Nagoya 461-8670 Japan EN 62061:2005 (Annex E) IEC 61131-2:2007 (in extracts) EN 60204-1:2006 + A1:2009 (in extracts) Safe motion control with the following safety functions: SLS, SSM, STO, SS1, SS2, SOS, SBC and digital dual channel safety I/Os. The motion controller complies with the requirements of the relevant standards (Cat. 3 / PL d acc. to EN ISO 13849-1, SIL CL 2 acc. to EN 61800-5-2 / EN 62061 / IEC 61508) and can be used in applications up to Cat. 3 / PL d acc. to EN ISO 13849-1 and SIL 2 acc. to EN 62061 / IEC 61508. This certificate is valid until 2017-03-20. The test report-no.: 968/EL 563.03/12 dated 2012-03-20 is an integral part of this certificate. This certificate is valid only for products which are identical with the product tested. It becomes invalid at any change of the codes and standards forming the basis of testing for the intended application. Köln, 2012-03-20 Certification Body for FS-Products Dipl.-Ing. Stephan Häb TÜV Rheinland Industrie Service GmbH, Am Grauen Stein, 51105 Köln / Germany Tel.: +49 221 806-1790, Fax: +49 221 806-1539, E-Mail: [email protected] Specific requirements The instructions of the associated Installation and Operating Manual shall be considered.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project