null  User manual
Contents
Before Using Your DVD Player
DVD Player
Getting Started
DV-S535
Instruction Manual
Basic Playback
Advanced Playback
Thank you for purchasing the ONKYO DVD Player.
Please read this manual thoroughly before making
connections and turning on the power.
Following the instructions in this manual will enable
you to obtain optimum performance and listening
enjoyment from your new DVD Player.
Please retain this manual for future reference.
Function Setup
Others
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
2
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
WARNING
AVIS
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of uninsulated
“dangerous voltage” within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
Important Safeguards
1.
Read Instructions – All the safety and operating instructions
should be read before the appliance is operated.
2.
Retain Instructions – The safety and operating instructions
should be retained for future reference.
3.
Heed Warnings – All warnings on the appliance and in the
operating instructions should be adhered to.
4.
Follow Instructions – All operating and use instructions should
be followed.
5.
Cleaning – Unplug the appliance from the wall outlet before
cleaning. The appliance should be cleaned only as
recommended by the manufacturer.
6.
Attachments – Do not use attachments not recommended by
the appliance manufacturer as they may cause hazards.
7.
Water and Moisture – Do not use the appliance near water –for
example, near a bath tub, wash bowl, kitchen sink, or laundry
tub; in a wet basement; or near a swimming pool; and the like.
8.
Accessories – Do not place the appliance on an unstable cart,
stand, tripod, bracket, or table. The appliance may fall, causing
serious injury to a child or adult, and serious damage to the
appliance. Use only with a cart, stand, tripod, bracket, or table
recommended by the
manufacturer, or sold with the
PORTABLE CART WARNING
appliance. Any mounting of the
appliance should follow the
manufacturer’s instructions, and
should use a mounting accessory
recommended by the
manufacturer.
9.
An appliance and cart combination
should be moved with care. Quick
stops, excessive force, and uneven
surfaces may cause the appliance
and cart combination to overturn.
S3125A
10. Ventilation – Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the appliance and
to protect it from overheating, and these openings must not be
blocked or covered. The openings should never be blocked by
placing the appliance on a bed, sofa, rug, or other similar
surface. The appliance should not be placed in a built-in
installation such as a bookcase or rack unless proper ventilation
is provided. There should be free space of at least 20 cm (8 in.)
and an opening behind the appliance.
11. Power Sources – The appliance should be operated only from
the type of power source indicated on the marking label. If you
are not sure of the type of power supply to your home, consult
your appliance dealer or local power company.
12. Grounding or Polarization – The appliance may be equipped
with a polarized alternating current line plug (a plug having one
blade wider than the other). This plug will fit into the power outlet
only one way. This is a safety feature. If you are unable to insert
the plug fully into the outlet, try reversing the plug. If the plug
should still fail to fit, contact your electrician to replace your
obsolete outlet. Do not defeat the safety purpose of the
polarized plug.
2
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
13. Power-Cord Protection – Power-supply cords should be routed
so that they are not likely to be walked on or pinched by items
placed upon or against them, paying particular attention to
cords at plugs, convenience receptacles, and the point where
they exit from the appliance.
14. Lightning – For added protection for the appliance during a
lightning storm, or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet and disconnect the
antenna or cable system. This will prevent damage to the
appliance due to lightning and power-line surges.
15. Overloading – Do not overload wall outlets, extension cords, or
integral convenience receptacles as this can result in a risk of
fire or electric shock.
16. Object and Liquid Entry – Never push objects of any kind into
the appliance through openings as they may touch dangerous
voltage points or short-out parts that could result in a fire or
electric shock. Never spill liquid of any kind on the appliance.
17. Servicing – Do not attempt to service the appliance yourself as
opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified service
personnel.
18. Damage Requiring Service – Unplug the appliance form the
wall outlet and refer servicing to qualified service personnel
under the following conditions:
A. When the power-supply cord or plug is damaged,
B. If liquid has been spilled, or objects have fallen into the
appliance,
C. If the appliance has been exposed to rain or water,
D. If the appliance does not operate normally by following the
operating instructions. Adjust only those controls that are
covered by the operating instructions as an improper
adjustment of other controls may result in damage and will
often require extensive work by a qualified technician to
restore the appliance to its normal operation,
E. If the appliance has been dropped or damaged in any way,
and
F. When the appliance exhibits a distinct change in
performance – this indicates a need for service.
19. Replacement Parts – When replacement parts are required, be
sure the service technician has used replacement parts
specified by the manufacturer or have the same characteristics
as the original part. Unauthorized substitutions may result in
fire, electric shock, or other hazards.
20. Safety Check – Upon completion of any service or repairs to
the appliance, ask the service technician to perform safety
checks to determine that the appliance is in proper operation
condition.
21. Wall or Ceiling Mounting – The appliance should be mounted
to a wall or ceiling only as recommended by the manufacturer.
22. Heat – The appliance should be situated away from heat
sources such as radiators, heat registers, stoves, or other
appliances (including amplifiers) that produce heat.
Precautions
This unit contains a semiconductor laser system and is classified
as a “CLASS 1 LASER PRODUCT.” So, to use this model properly,
read this Instruction Manual carefully. In case of any trouble, please
contact the store where you purchased the unit. To prevent being
exposed to the laser beam, do not try to open the enclosure.
The label on the right is
applied on the rear
panel except for USA
and Canadian models.
“CLASS 1 LASER
PRODUCT ”
CAUTION:
VISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK
FAILED OR DEFEATED. DO NOT STARE INTO BEAM.
1. This unit is a CLASS 1 LASER PRODUCT and employs a laser
inside the cabinet.
CAUTION:
2. To prevent the laser from being exposed, do not remove the cover.
Refer servicing to qualified personnel.
THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR
ADJUSTMENTS OR PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
For U.S. model
For Canadian model
The laser is covered by a housing which prevents exposure during
operation or maintenance. However, this product is classified as a
Laser Product by CDRH (Center for Devices and Radiological
Health) which is a department of the Food and Drug Administration.
According to their regulations 21 CFR section 1002.30, all
manufactures who sell Laser Products must maintain records of
written communications between the manufacturer, dealers and
customers concerning radiation safety. If you have any complaints
about instructions or explanations affecting the use of this product,
please feel free to write to the address on the back page of this
manual. When you write us, please include the model number and
serial number of your unit.
This class B digital apparatus complies with Canadian ICES-003.
In compliance with Federal Regulations, the certification,
identification and the period of manufacture are indicated on the rear
panel.
Sur les modeles dont la fiche est polarisee:
FCC INFORMATION FOR USER
For models having a power cord with a polarized plug:
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE
BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
Modele pour les Canadien
Cet appareil numérique de la classe B est conforme à la norme
NMB-003 du Canada.
ATTENTION: POUR EVITER LES CHOCS ELECTRIQUES,
INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA
BORNE CORRESPONDANTE DE LA PRISE ET POUSSER
JUSQU’AU FOND.
CAUTION:
The user changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
3
Precautions
1. Regional Restriction Codes (Region Number)
Regional restriction codes are built into DVD players and DVD
videos for each sales region. If the regional code of the DVD Player
does not match one of the regional codes on the DVD video,
playback is not possible.
The regional number can be found on the rear panel of the DVD
Player. (e.g. 1 for Region 1)
2. About This Manual
This manual explains the basic procedures for operating the DVD
Player. Some DVD videos do not support the full potential of the
DVD technology. Your DVD Player may therefore not respond to all
operating commands. Refer to instruction notes on discs.
A“
” mark may appear on the TV screen during operation. It
means that the operation is not permitted by the DVD player or the
disc.
3. Warranty Claim
You can find the serial number on the rear panel of the unit. In case
of warranty claim, please report this number.
4. Recording Copyright
Recording of copyrighted material for other than personal use is
illegal without permission of the copyright holder.
5. Power
WARNING
BEFORE PLUGGING IN THE UNIT FOR THE FIRST TIME, READ
THE FOLLOWING SECTION CAREFULLY.
The voltage of the available power supply differs according to
country or region. Be sure that the power supply voltage of the
area where the unit will be used meets the required voltage (e.g.,
AC120V, 60Hz or AC100-240V, 50/60Hz) written on the rear panel.
6. Do not touch the unit with wet hands
Do not handle the unit or power cord when your hands are wet or
damp. If water or any other liquid enters the case, take the unit to
an authorized service center for inspection.
7. Location of the unit
• Place the unit in a well-ventilated location.
Take special care to provide plenty of ventilation on all sides of
the unit especially when it is placed in an audio rack. If ventilation
is blocked, the unit may overheat and malfunction.
• Do not expose the unit to direct sunlight or heating units as the
unit's internal temperature may rise and shorten the life of the
pickup.
• Avoid damp and dusty places and places directly affected by
vibrations from the speakers. In particular, avoid placing the unit
on or above one of the speakers.
• Be sure the unit is placed in a horizontal position. Never place it
on its side or on a slanted surface as it may malfunction.
• When you place the unit near a TV, radio, or VCR, the playback
picture may become poor and the sound may be distorted. In
this case, place the unit away from the TV, radio, or VCR.
8. Care
From time to time you should wipe the front and rear panels and
the cabinet with a soft cloth. For heavier dirt, dampen a soft cloth in
a weak solution of mild detergent and water, wring it out dry, and
wipe off the dirt. Following this, dry immediately with a clean cloth.
Do not use rough material, thinners, alcohol or other chemical
solvents or cloths since these could damage the finish or remove
the panel lettering.
4
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
9. Notes on Handling
• When shipping the unit, use the original shipping carton and
packing materials. For maximum protection, repack the unit as
it was originally packed at the factory.
• Do not use volatile liquids, such as insect spray, near the unit.
Do not leave rubber or plastic products in contact with the unit
for a long time. They will leave marks on the finish.
• The top and rear panels of the unit may become warm after a
long period of use. This is not a malfunction.
• When the unit is not in use, be sure to remove the disc and turn
off the power.
• If you do not use the unit for a long period, the unit may not
function properly in the future. Turn on and use the unit
occasionally.
10. To Obtain a Clear Picture
The unit is a high technology, precision device. If the optical pickup lens and disc drive parts are dirty or worn down, the picture
quality becomes poor. To obtain a clear picture, we recommend
regular inspection and maintenance (cleaning or par ts
replacement) every 1,000 hours of use depending on the operating
environment. For details, contact your nearest dealer.
11. Notes on Moisture Condensation
Moisture condensation damages the unit.
Please read the following carefully.
• What is moisture condensation?
Moisture condensation occurs, for example, when you pour a
cold drink into a glass on a warm day. Drops of water form on
the outside of the glass. In the same way, moisture may condense
on the optical pick-up lens inside the unit, one of the most crucial
internal parts of the unit.
• Moisture condensation occurs in the following cases.
– When you bring the unit directly from a cold place to a warm
place.
– When you use the unit in a room where you just turned on the
heater, or a place where the cold wind from the air conditioner
directly hits the unit.
– In summer, when you use the unit in a hot and humid place
just after you move the unit from an air conditioned room.
– When you use the unit in a humid place.
• Do not use the unit when moisture condensation may occur.
If you use the unit in such a situation, it may damage discs and
internal parts. Remove the disc, connect the power cord of the
unit to the wall outlet, turn on the unit, and leave it for two or
three hours. After a few hours, the unit will have warmed up and
evaporated any moisture. Keep the unit connected to the wall
outlet and moisture condensation will seldom occur.
Table of Contents
Important Safeguards/Precautions/Table of Contents ....................................... 2–5
Getting Started
Features/Supplied Accessories ............................................................................. 6
Preparing the Remote Controller .......................................................................... 7
Connecting to a TV ............................................................................................... 8
Connecting to an Amplifier (To Enjoy the Sound Advantage of the DVD Player) .. 9
Connecting the Power/Turning on the DVD Player .............................................. 10
Notes on Discs .................................................................................................... 11
Basic Playback
Playing DVD Videos/VIDEO CDs/Audio CDs ...................................................... 12
Locating a Specific Title/Chapter/Track/Location ................................................ 16
Advanced Playback
Playing Repeatedly ............................................................................................. 19
Playing in a Favorite Order .................................................................................. 20
Playing in Random Order .................................................................................... 21
Zooming a Picture ............................................................................................... 22
Selecting the Camera Angle ............................................................................... 23
Turning on/off Subtitles/Selecting the Subtitle Language .................................... 24
Selecting the Audio Language and Sound System as a set ............................... 25
Using Information on the On-Screen Display and the DVD Player’s Display ...... 26
Function Setup
Customizing the Function Settings ..................................................................... 28
Table of Languages ............................................................................................. 36
Others
Troubleshooting ................................................................................................... 37
Specifications ...................................................................................................... 38
Index to Parts and Controls ................................................................................. 39
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
5
Getting Started
Features/Supplied Accessories
Features
DTS*1/Dolby Digital*2/MPEG2/PCM Digital Audio Outputs
Advanced 96-kHz/24-Bit D/A Converters
Video CD Capability
27-MHz/10-bit Video D/A Conversion
3-Mode “Zoom-In” Function
Audiophile-Grade Audio Performance
RGB Video Output Scart Connector
Composite Outputs
High Resolution On-screen Display
Full-Function Remote Control Supplied
*1 “DTS” and “DTS Digital Surround” are
trademarks of Digital Theater Systems, Inc.
*2 Manufactured under license from Dolby
Laboratories.
“Dolby”, “Pro Logic” and the double-D symbol
are trademarks of Dolby Laboratories.
Confidential Unpublished Works. ©1992-1997
Dolby Laboratories, Inc. All rights reserved.
Supplied Accessories
Make sure your box contains everything listed below.
If any pieces are missing, contact your nearest ONKYO dealer.
The number of accessories is indicated in brackets.
Remote controller (RC-419DV) [1]
Batteries (size AA/UM-3) [2]
SCART cable [1]
6
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
Audio/video connection cable [1]
Preparing the Remote Controller
Inserting the Batteries
1 Open the battery compartment cover.
Using the Remote Controller
Point the remote controller toward the remote control
sensor.
STANDBY indicator
(as remote control reception indicator)
STANDBY/ON
The STANDBY indicator lights up each time the
DVD Player receives a signal from the remote
controller. For the other functions of this indicator,
see page 10.
STANDBY
Remote control sensor
2 Insert the two R6 (size AA) batteries.
Be sure to match the + and – ends of the batteries
with the diagram inside the battery compartment.
30˚
30˚
Ab
ou
t5
– +
m
+
3 Close the battery compartment cover.
Notes
Notes
• Do not mix new batteries with old batteries or different kinds of
batteries.
• To avoid corrosion, remove the batteries if the remote controller is
not to be used for a long time.
• Remove dead batteries immediately to avoid damage from
corrosion. If the remote controller does not operate smoothly,
replace both batteries at the same time.
• The life of the batteries supplied is about six months but this will
vary depending on usage.
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
• Place the unit away from strong light such as direct sunlight or
inverted fluorescent light which can prevent proper operation of the
remote controller.
• Using another remote controller of the same type in the same room
or using the unit near equipment which uses infrared rays may
cause operational interference.
• Do not put any object such as a book on the remote controller. The
buttons of the remote controller may be pressed by mistake and
drain the batteries.
• Make sure the audio rack doors do not have colored glass. Placing
the unit behind such doors may prevent proper remote controller
operation.
• If there is any obstacle between the remote controller and the
remote control sensor, the remote controller will not operate.
7
Connecting to a TV
Before connecting
• Refer also to the instruction manual of the TV.
• When you connect the DVD Player to the TV, be sure to turn off the
power and unplug both units from the wall outlet before making any
connections.
• Connect the DVD Player to the TV directly. If you connect the DVD
Player to a VCR, TV/VCR combination, or video selector, the playback
picture may be distorted as DVD videos are copy protected.
• Note that one audio/video connection cable and one S video
connection cable are supplied. To use the audio/video cable for only the
audio connection, leave the yellow plug disconnected.
Incomplete
• Connect the plugs securely.
Insert completely
Connecting to a TV With Component Video Inputs
TV
To component video inputs
If the TV or monitor has component video inputs, make this
connection. Connecting to these inputs allows you to enjoy
higher quality picture playback compared to the
connections explained in “Connecting to a TV Without
Component Video Inputs” below.
Y
PB
PR
Notes
L (White)
R (Red)
• Actual labels for component video inputs may vary depending on
the TV manufacturer (ex. Y/CB/CR, Y/B-Y/R-Y, etc.).
• In some TVs, the color levels of the playback picture may be
reduced slightly or the tint may change. In such a case, adjust the
TV for optimum performance.
To audio
inputs
Component video connection cable
Stereo audio connection cable
(White)
(Red)
: Signal flow
DIRECT
COMPONENT
VIDEO OUTPUT
Y
PB
S VIDEO
TV
VIDEO
DO NOT connect the
power cord at this time.
DIGITAL
OUTPUT
ANALOG OUTPUT
VIDEO OUTPUT
( ACOUSTIC
CONTROL )
L
COAXIAL OPTICAL
MONO
L (DIRECT)
R
R
PR
(White)
(Red)
If the TV or monitor has an S video input, make the S video
connection. The S video connection will provide higher
quality picture playback.
: Signal flow
(Yellow)
Connecting to a TV Without Component Video
Inputs
If the TV audio input is monaural,
leave the red plug disconnected.
If you make the S video connection,
leave the yellow plug disconnected.
S video connection cable
Stereo audio/video
connection cable
TV
To audio inputs
L (White)
R (Red)
To video input (Yellow)
To S video input
8
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
Connecting to an Amplifier
(To Enjoy the Sound Advantage of the DVD Player)
Although you can reproduce the DVD Player’s sound from the TV speakers with the connections on the opposite page,
connecting with an amplifier and subwoofer provide you high quality dynamic sounds.
To reproduce Dolby Digital surround, MPEG1 audio, MPEG2 audio*, and DTS surround sound, you need to connect to an
amplifier with a Dolby Digital, MPEG1 audio, MPEG2 audio*, and DTS decoder respectively.
Before connecting
• Refer to the instruction manual of the amplifier.
• When you connect the DVD Player to the amplifier, be sure to turn off
the power and unplug both units from the wall outlet before making any
connections. Otherwise, the speakers may be damaged.
• Note that one audio/video connection cable is supplied. To use this
cable for the analog connection, leave the yellow plug disconnected.
Incomplete
• Connect the plugs securely.
Insert completely
Making a digital connection with the amplifier
If the amplifier has a Dolby Digital/DTS/
MPEG1/MPEG2*/Dolby Pro Logic decoder
An amplifier with a Dolby Digital/DTS/MPEG1/
MPEG2* decoder or 2 channel digital stereo
After completing the steps on page 10, set “Audio Out Select”
to “Bitstream” using the menu explained in “Customizing the
Function Settings” starting from page 28. See page 32 for direct
information.
To digital
coaxial input
Warning
To digital
optical input
DO NOT set “Audio Out Select” to “Bitstream” if the amplifier does not
have any of the decoders described above. If you do so, high volume
sound may be output and damage your hearing as well as the
speakers.
Coaxial connection
cable (not supplied)
If the amplifier doesn’t have any of the
above decoders (2 channel digital stereo
type amplifier)
DO NOT connect to
the AC-3 RF input
(e.g. of a Dolby Digital
receiver) which is
reserved only for video
disc players.
After completing the steps on page 10, set “Audio Out Select”
to “PCM” using the menu explained in “Customizing the
Function Settings” starting from page 28 . See page 32 for direct
information.
Make either connection
depending on the
amplifier’s input type.
Optical fiber
connection cable
(not supplied)
Note
• DO NOT set “Audio Out Select” to “Bitstream.” See “Warning” above.
• If “Audio Out Select” is set to “Analog 2ch,” PCM sounds may not be
reproduced depending on the sound format.
ANALOG OUTPUT
VIDEO OUTPUT
DIRECT
COMPONENT
VIDEO OUTPUT
Y
PB
S VIDEO
: Signal flow
VIDEO
TV
( ACOUSTIC
CONTROL )
DO NOT connect the power cord
at this time.
DIGITAL
OUTPUT
L
COAXIAL OPTICAL
MONO
L (DIRECT)
R
R
PR
Active
Subwoofer
(for powerful bass
sound)
(White)
(Red)
Making the analog connection with the amplifier
: Signal flow
If your amplifier has no digital audio input, you can make the
analog connection. If the amplifier has a Dolby Pro Logic
decoder, you can reproduce the Dolby Pro Logic surround
sound.
L (White)
Make sure that “Audio Out Select” is set to “Analog 2ch” (the
factory setting) to reproduce the Dolby Pro Logic surround sounds
with the analog connection. For details on the “Audio Out Select”
setting, see page 32.
R (Red)
Note
Stereo audio connection cable
An amplifier with no digital connection
* Not applicable for USA and Canadian models
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
9
Connecting the Power/
Turning on the DVD Player
Before connecting
1
• Make sure that all the connections on pages 8
and 9 are complete (the connection to a TV is
required).
• Turning on the DVD Player may cause a
momentary power surge, which might interfere
with other electrical equipment such as
computers. To prevent the interference, use a
wall outlet on a different circuit.
To a wall outlet
Connect the power
cord to a wall outlet.
CURSOR
OPEN/CLOSE
STOP
PLAY
ENTER
ACOUSTIC CONTROL
STANDBY/ON
MENU RETURN SETUP
POWER
ON
DIMMER
PAUSE
OFF
STANDBY
CURSOR
Thank you for your purchase of Our DVD-Video Player.
Please make a selection
for On-Screen Language and your TV shape and
press ENTER button on your remote control.
STANDBY/ON
POWER
ENTER
FIRST SETUP
On-Screen Language ENG
4:3LB
TV Shape
ON
STANDBY indicator
(lights up when in
standby mode)
The remote controller can also
be used to operate step 3.
POWER DISPLAY DIMMER
OFF
STANDBY
2
MENU RETURN SETUP
Press the POWER switch to
switch on the main power.
The DVD Player enters standby mode.
The STANDBY indicator lights up.
OPEN/
CLOSE
Notes
• The buttons on the remote controller don’t operate if the
POWER switch is set to OFF.
• To switch off the main power, press the POWER switch again.
SEARCH
1
2
3
4
5
6
+10
7
8
9
0
MENU
TOP MENU
3
The DVD Player turns on. The STANDBY indicator goes off.
ENTER
RETURN
AUDIO
SETUP
SUBTITLE
ANGLE SUBTITLE ON/OFF
STOP
PLAY
FR
FF
REPEAT
A-B
MEMORY
CLEAR
Press STANDBY/ON on the DVD Player
or POWER on the remote controller.
PAUSE/STEP
DOWN
UP
SLOW
RANDOM
ZOOM
The first time you turn on the DVD Player, the First Setup screen
appears.
With the First Setup screen, select the On-Screen Language and TV Shape
according to the aspect ratio of the TV screen (see pages 30 and 31)
following the steps below.
1
2
3
4
5
Press / to select “On-Screen Language,” then press ENTER (the
center of the cursor).
Select a language with / , then press ENTER.
Press to select “TV Shape,” then press ENTER.
Press / to select the aspect ratio of the TV screen, then press
ENTER.
Finally press SETUP.
All your selections are set and the First Setup screen disappears.
Notes
REMOTE CONTROLLER
10
RC-419DV
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
• To turn off the DVD Player, press STANDBY/ON on the DVD Player, or POWER on
the remote controller. The DVD Player enters standby mode. Be sure to set the
volume to minimum before turning off the DVD Player for the next use to avoid
sudden loud sound reproduction.
• You can change the above settings later with “Customizing the Function Settings” on
page 28.
Notes on Discs
This section shows you how to handle, clean, and store discs.
Playable Discs
Cleaning Discs
This DVD Player can playback the following discs.
Maximum
playback time
Approx. 4 hours
(single sided disc)
Approx. 8 hours
(double sided disc)
Approx. 80 minutes
(single sided disc)
Approx. 160 minutes
(double sided disc)
Contents
Disc
size
Audio
+
Video
(moving
pictures)
12 cm
VIDEO
CDs
Audio +
Video
(moving
pictures)
12 cm
Approx. 74 minutes
8 cm
Approx. 20 minutes
Audio
CDs
12 cm
Approx. 74 minutes
Audio
Disc mark
DVD
videos
8 cm
8 cm (CD
Approx. 20 minutes
single)
• You cannot playback discs other than those listed above.
• You cannot play discs such as CD-R, CD-RW, CD-ROM,
DVD-RAM, DVD-RW, etc., even if the marks in the above
table are labeled on those discs.
• This DVD Player uses the PAL*/NTSC color system, and
cannot playback DVD videos recorded in any other color
system (SECAM, etc.).
• Avoid using heart-shaped or octagonal discs. Playing
irregularly shaped discs may damage the internal
mechanism of the DVD Player.
• Do not use discs that have residue from adhesive tape,
rental discs that have peeling labels, or discs that have
custom labels or stickers. Otherwise, you may not be able
to eject the discs or the DVD Player may become
inoperative.
• Fingerprints and dust on the disc cause picture and sound
deterioration. Wipe the disc from the center outwards with a
soft cloth. Always keep the disc clean.
• If you cannot wipe off the dust with a soft cloth, wipe the disc
lightly with a slightly moistened soft cloth and finish with a
dry cloth.
• Do not use any type of solvent such as thinner, benzine,
commercially available cleaners or antistatic spray for vinyl
LPs. It may damage the disc.
Storing Discs
• Do not store discs in a place subject to direct sunlight or
near heat sources.
• Do not store discs in places subject to moisture and dust
such as a bathroom or near a humidifier.
• Store discs vertically in a case. Stacking or placing objects
on discs outside of their case may cause warping.
About VIDEO CDs
This DVD Player supports VIDEO CDs equipped with the PBC
(Version 2.0) function. (PBC is the abbreviation of Playback Control.)
You can enjoy two playback variations depending on the type of disc.
• VIDEO CD not equipped with PBC function (Version 1.1)
Sound and movies can be played on this DVD Player in the
same way as an audio CD.
• VIDEO CD equipped with PBC function (Version 2.0)
In addition to operation of the VIDEO CD not equipped with the
PBC function, you can enjoy playback with interactive software
and search function using the menu displayed on the TV screen
(Menu Playback). Some of the functions described in this
Instruction Manual may not work with some discs.
* Not applicable for USA and Canadian models
Notes on Copyright
Handling Discs
• Do not touch the playback side of the disc.
Playback side
• Do not attach paper or tape to discs.
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
It is forbidden by law to copy, broadcast, show, broadcast on
cable, play in public, and rent copyrighted material without
permission.
DVD videos are copy protected, and any recordings made from
these discs will be distorted.
This product incorporates copyright protection technology that is
protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation
and other rights owners. Use of this copyright protection
technology must be authorized by Macrovision Corporation, and
is intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
11
Basic Playback
Playing DVD Videos / VIDEO CDs / Audio CDs
Before playing
• DVD Videos, VIDEO CDs, and audio CDs can be played with the DVD Player (see “Playable
Discs” on page 11). Do not play anything else.
• When playing DVD videos or VIDEO CDs, turn on the TV and set the TV to the DVD Player’s input.
• If the audio system is connected to the DVD Player, turn on the audio system and set it to the DVD
Player’s input.
About the
DVD
VCD
CD
DVD
DVD
,
VCD
, and
CD
marks in the pages related to disc operation
If the DVD Player is connected to the TV or
amplifier through the analog audio jacks, do
not play DTS-encoded discs. Excessive
noise may be output from the analog stereo
jacks, which may damage the connected
equipment.
To reproduce DTS surround sounds, digital
connection to an amplifier with a DTS
decoder is needed.
means “The function or title is related to DVD operation.”
means “The function or title is related to VIDEO CD operation.”
means “The function or title is related to audio CD operation.”
VCD
Warning
CD
Basic Playback
1
Press r.
The disc tray opens.
2
If the DVD Player is in standby mode
when the button is pressed
The DVD Player turns on and the disc tray
opens. In this case, it takes several seconds
until the disc tray opens.
Place the disc on
the disc tray.
Put the disc in the tray with the label
side facing up.
There are two different disc sizes.
Place the disc in the correct guide on
the disc tray.
CURSOR
OPEN/CLOSE
STOP
PLAY
ENTER
ACOUSTIC CONTROL
STANDBY/ON
MENU RETURN SETUP
POWER
ON
DIMMER
PAUSE
OFF
STANDBY
This disc indicator lights while
the disc is in the DVD Player.
3
DVD
If any menu appears on the TV screen
Press s.
VCD
The disc tray closes and playback starts.
If you press r to close the tray after step 2,
playback may automatically start depending on the
disc.
See “Operating the menu appearing on the TV screen” on
page 15.
DVD
If the sound is not reproduced
VCD
• See “Warning” above.
• Recheck the connections and settings on pages 8 and 9.
• See “Tips to select the most suitable audio format” on page
15.
CD
CAUTION
The type of the inserted disc lights.
For the other information that appears in the display, see
pages 26 and 27.
12
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
Keep your fingers well clear of the disc tray as it is closing.
Neglecting to do so may cause serious personal injury.
DVD
DVD
If the screen on the right
appears – Screen Saver
Tip to obtain a higher quality picture
Occasionally, some picture noise not usually visible during a
normal broadcast may appear on the TV screen while playing a
DVD video because the high resolution pictures on these discs
include a lot of information. While the amount of noise depends
on the TV you use, you should generally adjust the TV to reduce
sharpness when viewing DVD videos.
If you pause a picture for a long time,
the screen saver operates.
To resume normal display, press s.
(You can set this function to Off
using the menu explained in
“Customizing the Function Settings”
starting from page 28. See page 33
for direct information.)
DVD
To play NTSC discs (Multisystem TV is needed)*
Set “PAL/Auto” to “Auto” using the menu explained in
“Customizing the Function Settings” starting from page 28. See
page 31 for direct information.
* Not applicable for USA and Canadian models
To remove the disc
DVD
VCD
POWER DISPLAY DIMMER
CD
Press r to open the disc tray.
SEARCH
Remove the disc after the disc tray opens completely.
After removing the disc, be sure to press the button again to close
the tray.
To pause playback (still mode)
OPEN/
CLOSE
DVD
VCD
1
2
3
4
5
6
+10
7
8
9
0
1
CD
MENU
TOP MENU
Press g during playback.
To start playback, press s.
DVD
To play frame by frame
VCD
Press the button repeatedly during pause. Each time you press the
button the picture advances one frame.
To resume normal playback, press s.
ENTER
RETURN
Note
AUDIO
SETUP
SUBTITLE
ANGLE SUBTITLE ON/OFF
The sound is muted during still mode and frame by frame playback.
To stop playback
DVD
VCD
CD
Press e.
When you press s to restart playback, playback starts from the
location where you stopped playback because the location index is
stored in memory.
STOP
PLAY
FR
FF
REPEAT
A-B
MEMORY
CLEAR
PAUSE/STEP
DOWN
UP
3
SLOW
RANDOM
ZOOM
Note
The location where playback resumes may vary depending on the disc or the
scene where you stopped.
Resuming playback from the beginning
Press e again after stopping playback to clear the location index memory,
then press s to start playback.
DVD
VCD
Playback starts from the beginning of the current title.
To start playback from the beginning of the DVD video, open and
close the disc tray (press r twice) then press s to start playback.
Playback starts from the beginning of the disc.
CD
Note
The location index memory will also be cleared when:
• The power cord is unplugged,
• The DVD Player has entered standby mode,
• The disc tray is opened, and
• The parental lock setting is changed (see page 34) or a disc menu
language is selected (see page 30).
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
REMOTE CONTROLLER
RC-419DV
Notes
• Do not move the DVD Player during playback. Doing so
may damage the disc.
• Use the r button on the remote controller or DVD Player
to open and close the disc tray. Do not touch the disc tray
while it is moving. Doing so may cause the DVD Player to
malfunction.
• Do not press down on the disc tray or put any objects
other than playable discs on the disc tray. Doing so may
cause the DVD Player to malfunction.
• In many instances, a menu screen appears when
playback of a movie is complete. Prolonged display of an
on-screen menu may damage your television set,
permanently etching that image onto its screen. To avoid
this, be sure to press e once the movie is complete.
13
Playing DVD Videos / VIDEO CDs / Audio CDs
To play in fast reverse or fast forward
DVD
VCD
CD
POWER DISPLAY DIMMER
OPEN/
CLOSE
Press d (Fast Reverse) or f (Fast Forward) during playback.
DVD
The playback speed becomes two times the normal speed.
Each press of the same button changes the playback speed as follows:
Two times
the normal speed
×2
Eight times
the normal speed
×8
→
←
TV screen
30 times
the normal speed
SEARCH
1
2
3
4
5
6
7
8
9
+10
× 30
→
←
0
MENU
TOP MENU
Notes
• No sound is reproduced and no subtitles appear during fast forward or reverse
playback.
• The ×2, ×8, and ×30 speeds are only approximate speeds. These speeds may
vary slightly from disc to disc.
Each time you press the same button, the playback speed alternates
with the other as follows:
VCD
CD
To check the marks on the
right while playing a CD,
turn on the TV and set the When d
TV to the DVD Player’s
is pressed
input.
TV screen
FR1
Note
No sound is reproduced
and no subtitles appear
When f
while playing back a
is pressed
VIDEO CD, whereas the
sound is reproduced while
playing back an audio CD.
FF1
ENTER
RETURN
AUDIO
SETUP
SUBTITLE
ANGLE SUBTITLE ON/OFF
STOP
PLAY
FR
FF
REPEAT
A-B
MEMORY
CLEAR
PAUSE/STEP
FR2
→
←
DOWN
UP
SLOW
FF2
→
←
RANDOM
ZOOM
To resume normal playback, press s.
REMOTE CONTROLLER
DVD
To play in slow-motion
RC-419DV
VCD
Press
(reverse slow-motion)* or
(forward slow-motion) during
playback.
Each press of the same button changes the slow-motion speed as follows:
1/2
the normal speed
1/4
the normal speed
1/2
1/4
1/8
→
←
TV screen
1/8
the normal speed
→
←
Note
The sound is muted during slow-motion playback.
* This button operates only
for DVD discs.
To resume normal playback, press s.
Enjoying powerful bass sound
CURSOR
OPEN/CLOSE
STOP
ENTER
ACOUSTIC CONTROL
STANDBY/ON
MENU RETURN SETUP
POWER
ON
DIMMER
PAUSE
OFF
STANDBY
ACOUSTIC CONTROL button/indicator
→
→
Each press of the button changes the mode as follows:
Bass Cut (Lit in green) → Bass Boost (Lit in orange)
Off (Not lit)
14
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
When using the TV speakers
PLAY
The audio connection on page 8 is required.
To boost bass sound, select the Bass Boost mode as shown
on the left.
When using an active subwoofer
Connecting an active subwoofer as shown on page 9
provides better bass sound than boosting bass sound from
the TV speakers. When reproducing the sound from the
subwoofer, select the Bass Cut mode as shown on the left.
DVD
VCD
Operating the menu appearing on the TV screen
About disc menu
DVD
A DVD video may include more than one language and more than one sound
system. In many instances, such DVD videos let you choose the language (e.g. disc
menu language/audio language/subtitle language), sound system, and so on using
the menu.
Depending on the disc, the name of the disc menu varies and the disc menu may be
included in the main menu.
About title menu
DVD
/
/ /
/ENTER
OPEN/
CLOSE
POWER DISPLAY DIMMER
Remote controller
operation
SEARCH
Press the appropriate button.
1
2
3
4
5
6
7
8
9
+10
VCD
DVD Player operation
A DVD video or VIDEO CD with the PBC (Playback Control) function (see “About
VIDEO CDs” on page 11) may let you locate a title/chapter (see page 16) using the
menu.
Depending on the disc, the name of the title menu varies and the title menu may be
included in the main menu.
0
MENU
Press the appropriate mark on
CURSOR.
To confirm, press the center of
CURSOR (ENTER).
TOP MENU
ENTER
If any menu appears on the TV screen, press / / / to select the
item or setting, then press ENTER to confirm.
The operation varies depending on the disc. Follow the disc instructions.
To display the disc menu again
RETURN
SETUP
AUDIO
SUBTITLE
ON/OFF
ANGLE SUBTITLE
STOP
PLAY
FR
FF
REPEAT
A-B
MEMORY
CLEAR
PAUSE/STEP
DOWN
UP
SLOW
RANDOM
ZOOM
Press MENU.
CURSOR
OPEN/CLOSE
STOP
PLAY
ACOUSTIC CONTROL
STANDBY/ON
MENU RETURN SETUP
POWER
ON
DIMMER
To display the title menu again
Press TOP MENU.
ENTER
REMOTE CONTROLLER
RC-419DV
If the button doesn‘t work
Try the other one. Some discs do not
include a menu.
PAUSE
OFF
STANDBY
DVD
Tips to select the most suitable audio format
If a DVD video includes more than one sound system, you may need to
select the sound system with the above explained disc menu.
The following are tips on how to select the most suitable sound
system. See also pages 8 and 9 and the amplifier’s manual.
Various sound formats and sound effects
Minimum speaker configuration for
DTS/Dolby Digital/MPEG2* surround sounds
Center Speaker
When you make the digital connection to the amplifier
Does the amplifier have a DTS decoder?
→ Select “DTS” or “ .”
Does the amplifier have a Dolby Digital decoder?
6CH,” “
5.1CH,” or
→ Select “Dolby Digital,” “
.”
“
Does the amplifier have an MPEG2 decoder?*
D I G I T A L
→ Select “MPEG2” or “
.”
Is the DVD Player connected to an amplifier with a
Dolby Pro Logic Surround decoder?
→ Select “Dolby Pro Logic surround” or
.”
“
Is the amplifier a 2 channel stereo type?
→ Select “Stereo.”
When you make the analog connection to the amplifier/
When you reproduce the sound from the TV speakers
Is the DVD Player connected to an amplifier with a
Dolby Pro Logic Surround decoder?
→ Select “Dolby Pro Logic surround” or
.”
“
Is the amplifier a 2 channel stereo type?
→ Select “Stereo.”
Do you reproduce the sound only from the TV
speakers?
→ Select “Stereo.”
Notes
• Dolby Digital, PCM, MPEG2* sounds are converted to analog and
can be reproduced as stereo sounds.
• DTS sounds are not reproduced with the analog connection.
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
Left front
speaker
Right front
speaker
Left surround
speaker
Right surround
speaker
The 5.1-channel digital surround format of DOLBY DIGITAL/DTS/
MPEG2* enables you to individually play five full-range (20Hz-20kHz)
channels (left and right front, center, two surround channels) plus an
LFE (Low Frequency Effect) channel for the low-range effect sound. It
will create a realistic sound as heard in theaters and concert halls.
DOLBY DIGITAL Surround
DVD videos that have the
system.
D I G I T A L
mark are recorded using this
DTS Surround
DVD videos and audio CDs that have the
using this system.
mark are recorded
MPEG2*
DVD videos that have the
mark are recorded using
this system. MPEG2 may have 8 channels. In this case, left and right
center speakers in addition to the above speaker configuration are
used.
DOLBY PRO LOGIC Surround
This surround format consists of 4 channels (left and right front,
center, and monaural surround channel) and emphasizes the center
channel. This format is very effective for panning music, conversation,
and three-dimensional sound movement output from three front
channels. It also simulates the atmosphere and surround effects of
the sound reflected from the side and rear walls of the theater.
DVD videos that have the
this system.
mark are recorded using
* Not applicable for USA and Canadian models
15
Locating a Specific Title / Chapter /
Track / Location
The structure of the disc content
VIDEO CD/Audio CD
VIDEO CDs and Audio CDs are divided into tracks.
DVD video
Normally, DVD videos are divided into titles,
and the titles are subdivided into chapters.
Title 1
Track 1
Title 2
Track 2
Track 3
Track 4
Track 5
Chapter 1 Chapter 2 Chapter 1 Chapter 2 Chapter 3
DVD
DVD
Locating a title using the title menu
Locating a specific title and chapter by
entering the numbers
If a DVD video contains a title menu, you can locate a
specific title using the title menu function.
1
TOP MENU
If a DVD video contains the numbers corresponding to the
titles and chapters, you can locate a specific chapter in a
specific title directly by entering the numbers.
Press TOP MENU. (Depending on
the DVD video, press MENU.)
The title menu appears on the TV screen.
1
Press SEARCH.
SEARCH
Make sure that the number next to “Title:”
is highlighted. (You can shift the highlight
using / .)
Example of a title menu.
TITLE 1
TITLE 2
e.g.
1
T i t l e:
Chapter :
TITLE 3
2
2
Press / / /
you want.
1
TITLE 4
to select the title
Press the number button(s) to enter
the title number for the desired title.
1
2
3
4
5
6
+10
7
8
9
0
e.g. To select title 2
2
ENTER
3
If the titles in the title
menu are assigned a
number, you can also
directly locate a specific
title using the number
buttons.
2
3
4
5
6
+10
7
8
9
0
1
1
T i t l e: 12
Chapter :
1
To select title 12
1
2
If you do not need to change the chapter
number appearing below the title number,
skip steps 3 and 4, and go to step 5.
Press ENTER.
ENTER
The DVD Player starts playback from
chapter 1 of the selected title.
T i t l e:
2
Chapter :
3
Press to highlight the number
next to “Chapter:.”
ENTER
Notes
• The instructions above describe basic procedures which may vary
depending on the contents of the DVD video. If different
instructions appear on the TV screen, follow those instructions.
• If you display the title menu during playback and press TOP MENU
again without selecting any title, the DVD Player usually resumes
playback from the point where you first pressed TOP MENU.
(There may be exceptional cases depending on the disc.)
• This method of locating a title is available only on a disc that
contains a title menu.
• The name of the button in the instruction notes of discs varies
depending on the disc.
16
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
2
T i t l e:
Chapter :
4
1
Press the number button(s) to enter
the chapter number for the desired
chapter.
1
2
3
4
5
6
+10
7
8
9
0
e.g. To select chapter 25
2
5
Title: 2
25
Chapter :
POWER DISPLAY DIMMER
OPEN/
CLOSE
SEARCH
Number buttons
1
2
3
4
5
6
7
8
9
SEARCH
+10
0
MENU
TOP MENU
TOP MENU
MENU
/ / /
ENTER
/
ENTER
RETURN
AUDIO
STOP
s
SETUP
SUBTITLE
ANGLE SUBTITLE ON/OFF
PLAY
FR
FF
REPEAT
A-B
MEMORY
CLEAR
PAUSE/STEP
DOWN
UP
SLOW
RANDOM
ZOOM
CLEAR
REMOTE CONTROLLER
VCD
5
Locating a specific track directly
Press s.
PLAY
The DVD Player starts playback from the
selected chapter in the selected title.
You can locate the desired track by entering the number.
1
Notes
• To enter a number between 10 and 99, you can also use
ten button) as follows:
+10
+10
5
RC-419DV
CD
+10
(plus
Press the number button(s) to enter
the track number for the desired
track.
1
2
3
4
5
6
+10
7
8
9
0
e.g. To select track 25
2
Title: 2
25
Chapter :
• This location method is available only on a disc that contains the
numbers corresponding to the titles and chapters.
• To cancel the entered title and chapter numbers, press CLEAR
before pressing s. The title and chapter numbers in step 1 will be
displayed.
• To close the Title/Chapter display, press SEARCH several times
(the number of times you press SEARCH varies depending on the
disc).
5
Track : 2 5
2
Press s.
PLAY
The DVD Player starts playback from the
selected track.
Notes
• To enter a number between 10 and 99, you can also use
ten button) as follows:
+10
+10
+10
(plus
5
Track : 2 5
• To cancel the entered track number, press CLEAR before pressing
s. The current track number will be displayed.
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
17
Locating a Specific Title /
Chapter / Track / Location
POWER DISPLAY DIMMER
OPEN/
CLOSE
SEARCH
Number buttons
1
2
3
4
5
6
7
8
9
SEARCH
+10
0
MENU
TOP MENU
CURSOR
OPEN/CLOSE
STOP
PLAY
ENTER
ENTER
RETURN
SETUP
ACOUSTIC CONTROL
STANDBY/ON
MENU RETURN SETUP
POWER
ON
DIMMER
PAUSE
AUDIO
OFF
SUBTITLE
ANGLE SUBTITLE ON/OFF
STANDBY
STOP
s
q w
PLAY
FR
FF
REPEAT
A-B
MEMORY
CLEAR
PAUSE/STEP
DOWN
RANDOM
REMOTE CONTROLLER
DVD
VCD
DVD
CD
Locating a specific chapter or track
consecutively
You can locate consecutive chapters or tracks.
Remote controller
DOWN
UP
Press q or w (repeatedly) to
select the chapter or track you wish
to start playing
VCD
ZOOM
RC-419DV
Locating a specific location by
entering the time
You can locate a specific location by entering its
corresponding time (hours, minutes, and seconds).
1
Press SEARCH twice.
SEARCH
You may need to press the button more
than twice (depending on the disc) until
the following display appears.
Press q repeatedly to select the
former chapters or tracks in reverse order.
DVD Player
q/w
CD
Press q once to start playback from
the beginning of the current chapter or
track.
Press w repeatedly to select the next
chapter or track in order.
UP
SLOW
Time - : - - : - -
2
Press the number buttons to enter
the location’s time.
1
2
3
4
5
6
+10
7
8
9
0
e.g.
1
5
2
Hours
3
Minutes
0
Seconds
Time 1:25:30
3
PLAY
Press s.
The DVD Player starts playback from the
entered location.
Notes
• Some titles may not display chapter numbers.
• When you set “Title Stop” to “Off” (see page 35), you can locate
consecutive chapters in another title. If you go back to the
preceding title by pressing q, the DVD Player locates the first
chapter of the title. When “Title Stop” is set to “On,” you can locate
consecutive chapters only within the current title.
• If you select the chapter or track during pause (while in still mode),
you need to press s to start playback.
18
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
Notes
• You can also use +10 (plus ten button) to add ten to the hours,
minutes, or seconds.
• Some discs may not respond to this procedure.
• Some scenes may not be located precisely.
• This method for accessing specific locations is available only
within the current title of the DVD video or within the current track
of the VIDEO CD/audio CD.
Advanced Playback
POWER DISPLAY DIMMER
Playing Repeatedly
OPEN/
CLOSE
SEARCH
2
3
4
5
6
7
8
9
1
+10
0
MENU
TOP MENU
ENTER
RETURN
AUDIO
STOP
A-B
REPEAT
You can play a specific title, chapter, track, or segment
repeatedly (Title repeat, chapter/track repeat, A-B repeat).
DVD
VCD
Repeating a Title, Chapter, or Track
You can play the same title, chapter, or track repeatedly
(Title, chapter/track repeat).
1
Select the title, chapter, or track
you want to repeat. (See pages 16
to 18.)
SUBTITLE
ANGLE SUBTITLE ON/OFF
PLAY
FR
FF
REPEAT
A-B
MEMORY
CLEAR
PAUSE/STEP
DOWN
UP
SLOW
RANDOM
ZOOM
CLEAR
DVD
CD
SETUP
VCD
CD
Repeating a Specific Segment
You can play a specific segment repeatedly (A-B repeat).
1
A-B
Press A-B at the beginning of the
segment (point A) you want to play
repeatedly.
A–
2
REPEAT
Press REPEAT.
Each time you press REPEAT, the repeat
mode changes as follows.
DVD
Chapter Repeat
Title Repeat
Repeat Off
VCD
A-B
Press A-B again at the end of the
segment (point B).
Repeats the same
chapter.
A–B
Repeats the same
title.
The DVD Player automatically returns to
point A and starts repeat playback of the
selected segment (A-B).
Resumes normal
playback.
To resume normal playback
CD
Track Repeat
2
Repeats the same
track.
All Repeat
Repeats the entire
disc.
Repeat Off
Resumes normal
playback.
To resume normal playback
CLEAR
Press CLEAR.
Notes
• Some discs may not permit A-B repeat operation.
• You can play a specific segment only within the current title or
track.
• You cannot set the A-B repeat function for segments that include
multiple camera angles.
• There may be a slight difference between point A and the location
where playback actually resumes depending on the disc.
CLEAR
Press CLEAR.
Note
Some discs may not permit repeat operation.
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
19
POWER DISPLAY DIMMER
Playing in a Favorite Order
Title : 2
Chapter : 12
DISPLAY
SEARCH
2
3
4
5
6
7
8
9
1
Number
buttons
+10
0
MENU
Title : 2
Chapter : 25
OPEN/
CLOSE
TOP MENU
2
Title : 1
Chapter : 1
ENTER
RETURN
SETUP
RETURN
AUDIO
STOP
3
You can combine your favorite titles, chapters, or tracks and play
them in any order. You can program up to 28 selections into the
memory (Memory playback).
DVD
VCD
REPEAT
1
SUBTITLE
ANGLE SUBTITLE ON/OFF
PLAY
FR
FF
REPEAT
A-B
MEMORY
CLEAR
PAUSE/STEP
DOWN
UP
SLOW
RANDOM
ZOOM
CLEAR
CD
Setting Titles, Chapters, or Tracks in a Favorite Order
The DVD Player automatically plays titles, chapters, or tracks in the order you program.
1
MEMORY
VCD
Insert a disc and press MEMORY
while the disc is stopped.
1
2
3
4
5
6
+10
The following display appears.
7
8
9
0
CD
Press the number button(s) to
select the track number, then press
ENTER to confirm.
Repeat this step to select the next track.
MEMORY
1
2
3
4
5
6
7
T
––
––
––
––
––
––
––
C
––
––
––
––
––
––
––
8
9
10
11
12
13
14
T
––
––
––
––
––
––
––
C
––
––
––
––
––
––
––
15
16
17
18
19
20
21
T
––
––
––
––
––
––
––
C
––
––
––
––
––
––
––
22
23
24
25
26
27
28
DVD
T
––
––
––
––
––
––
––
C
––
––
––
––
––
––
––
ENTER
VCD
CD
T: Track number
C:Ignored even if a
number is entered.
T: Title number
C: Chapter number
3
PLAY
While the MEMORY display is
displayed, press s.
The DVD Player starts memory playback.
2
DVD
2
3
4
5
6
+10
7
8
9
0
1
1 Press the number button(s) to
enter the title number.
2 Press to highlight “--” below C.
3 Press the number button(s) to
enter the chapter number.
4 Press ENTER to confirm.
To change or cancel the entered program
While the MEMORY display is displayed, press / to
highlight the item. To select another title/chapter or track
follow step 2. To cancel, press CLEAR.
To select another chapter in the same title
Press the number button(s) for another chapter.
ENTER
To select another title
Press to highlight the next “--” below T, then
repeat the above steps.
1
2
3
4
5
6
+10
7
8
9
0
e.g. To play chapter 25 in title 2, chapter 12 in
title 2, all the chapters in title 1, and
chapter 2 in title 4.
Title number
Memory 1
ENTER
Chapter number
2
5
ENTER
1
2
ENTER
2
Memory 2
Memory 3
1
Memory 4
4
MEMORY
1
2
3
4
5
6
7
20
T
02
02
01
04
––
––
––
C
25
12
––
02
––
––
––
8
9
10
11
12
13
14
T
––
––
––
––
––
––
––
C
––
––
––
––
––
––
––
15
16
17
18
19
20
21
T
––
––
––
––
––
––
––
C
––
––
––
––
––
––
––
22
23
24
25
26
27
28
T
––
––
––
––
––
––
––
C
––
––
––
––
––
––
––
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
Press CLEAR.
To program during playback
If you press MEMORY during playback, the display to accept
your programming appears. To display the MEMORY display,
press DISPLAY, then follow steps 2 and 3.
Notes
ENTER
2
To resume normal playback
ENTER
• You can also use +10 (plus ten button) to add ten to the number.
• Some discs may not permit memory playback operation.
• If you press REPEAT during memory playback, the DVD Player
repeats the current memory playback.
• Although you can select title, chapter, and track numbers not
included on the disc, those numbers are ignored.
• If you press MEMORY or RETURN while the MEMORY display is
displayed, the MEMORY display disappears.
• The programmed selections will be cleared when you turn off the
DVD Player.
OPEN/
CLOSE
POWER DISPLAY DIMMER
Playing in Random Order
SEARCH
Number
buttons
1
2
3
4
5
6
7
8
9
SEARCH
+10
0
MENU
TITLE
Title
: 1: 1
CHAPTER
Chapter
: 3: 3
TOP MENU
ENTER
Title : 2
Chapter : 2
Title : 3
Chapter : 1
s
RETURN
SETUP
AUDIO
SUBTITLE
ON/OFF
ANGLE SUBTITLE
STOP
PLAY
FR
FF
REPEAT
A-B
MEMORY
CLEAR
PAUSE/STEP
DOWN
UP
w
You can play titles, chapters within a title, or tracks in random
order (Random playback).
DVD
VCD
CD
The DVD Player automatically selects the titles in a DVD video,
or tracks in a VIDEO CD/audio CD, and plays them randomly.
DVD
RANDOM
Press RANDOM twice while the
disc is stopped.
RANDOM
Playing Chapters in Random Order
The DVD Player automatically selects the chapters in a title
and plays them randomly.
1
Press SEARCH, then press the
appropriate number button(s) for
the title which contains the
chapters you want to play in
random order.
SEARCH
Random off
Title Random
VCD
e.g. To play the chapters in title 2 in random
order
→
→
Chapter Random → Title Random
CD
Press RANDOM once while the disc
is stopped.
2
1
4
5
6
+10
7
8
9
0
2
RANDOM
2
Title : 2
Chapter: 1
Press RANDOM while the disc is
stopped.
Chapter Random
Title : 2
Chapter: 1
Track Random ↔ Random off
Track Random
Track : 1
If you press RANDOM during playback,
the DVD Player automatically starts
random playback after finishing the
current title or track.
SEARCH
3
Then, press RANDOM repeatedly to
alternate the mode as follows:
PLAY
ZOOM
CLEAR
Then, press RANDOM repeatedly to
change the random play mode as follows:
2
RANDOM
DVD
Playing Titles or Tracks in Random Order
1
SLOW
If you press RANDOM during playback,
the DVD Player automatically starts
random playback after finishing the
current chapter.
3
PLAY
Within 5 seconds, press s.
The DVD Player starts random playback.
Within 5 seconds, press s.
The DVD Player starts random playback.
To resume normal playback
To resume normal playback
CLEAR
Press CLEAR.
CLEAR
Press CLEAR.
Notes
Notes
• Some discs may not permit random playback operation.
• You cannot use the random playback function together with the
memory playback function.
• If you press w during random playback, the DVD Player goes to
another title or track and continues random playback.
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
• You can also use +10 (plus ten button) to add ten to the number.
• Some discs may not permit random playback operation.
• You cannot use the random playback function together with the
memory playback function.
• If you press w during random playback, the DVD Player goes to
another chapter and continues random playback.
21
OPEN/
CLOSE
POWER DISPLAY DIMMER
Zooming a Picture
SEARCH
2
3
4
5
6
7
8
9
1
+10
0
MENU
/
TOP MENU
/ /
RETURN
You can magnify areas within a picture.
ENTER
RETURN
SETUP
AUDIO
SUBTITLE
ON/OFF
ANGLE SUBTITLE
STOP
PLAY
FR
FF
REPEAT
A-B
MEMORY
CLEAR
PAUSE/STEP
DOWN
UP
SLOW
RANDOM
ZOOM
ZOOM
CLEAR
DVD
Zooming a Picture and Shifting the Zoom Point
You can zoom in on a picture. You can also shift the zoom point.
ZOOM
Press ZOOM during normal, slow,
or still playback.
If you press ZOOM repeatedly, the
magnification level increases.
Zoom 1
↓
Zoom 2
↓
Zoom 3
RETURN
To reduce the magnification level
Press RETURN.
To shift the zoom point
ENTER
CLEAR
Press / / / .
When the zoom point reaches an edge of the
picture, the color of “Zoom” changes.
To restore the original zoom point (center
of the picture)
Press CLEAR.
Notes
• Some discs may not permit zoom operation.
• During some scenes, the buttons may not work as described
above.
• Zooming does not work on subtitles or menu screens included on
DVD videos.
• During zoom playback, / / / does not work on menu screens
included on DVD videos. If you want to view the menus, cancel
zoom playback.
• The magnification level varies depending on the picture size you
select. (See pages 28 and 31.)
22
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
To resume normal playback
ZOOM
Press ZOOM repeatedly until "Zoom"
disappears.
OPEN/
CLOSE
POWER DISPLAY DIMMER
Selecting the Camera Angle
SEARCH
2
3
4
5
6
7
8
9
1
2
+10
0
MENU
TOP MENU
ENTER
Angle : 1
Angle : 2
Angle : 3
1, 2
You can select a preferred camera angle to watch a scene.
RETURN
SETUP
AUDIO
SUBTITLE
ON/OFF
ANGLE SUBTITLE
STOP
PLAY
FR
FF
REPEAT
A-B
MEMORY
CLEAR
PAUSE/STEP
DOWN
UP
SLOW
RANDOM
ZOOM
CLEAR
DVD
Changing the Camera Angle
If the scene was recorded from multiple angles, you can easily change the camera angle of the scene you are watching.
1
ANGLE
Press ANGLE while playing a scene
recorded with multiple angles.
While playing a scene recorded with
multiple angles, the angle icon ( )
appears in the DVD display
and on the TV screen.
Press ANGLE while the angle icon is
displayed.
Angle: 1
Angle icon
Current angle
number
2
ANGLE
Press ANGLE or while the angle
number is displayed on the TV
screen.
Each time you press ANGLE or
camera angle changes.
, the
Angle: 1
To turn off the angle number display
CLEAR
Press CLEAR.
To disable the angle icon display on the TV
Set “On-Screen Displays” to “Off” using the setting menu (see
pages 28 and 33).
Monitor the DVD display to check that the scene has multiple
angles. The angle indicator ( ) flashes in the DVD Player’s
display.
Notes
• You can change the camera angle during still playback. The
camera angle changes to the new setting when you resume
normal playback.
• If you pause a picture immediately after changing the camera
angle, the resumed playback picture may not use the new camera
angle.
ENTER
Angle: 2
Angle: 3
: Cycles backwards
You can also change the camera angle
directly by pressing the number buttons
corresponding to the angle number.
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
23
Turning on/off Subtitles
Selecting the Subtitle Language
POWER DISPLAY DIMMER
OPEN/
CLOSE
SEARCH
2
3
4
5
6
7
8
9
1
/
+10
0
MENU
TOP MENU
ENTER
RETURN
AUDIO
STOP
Good evening!
Bon soir!
¡Buenas tardes!
You can display subtitles on the TV screen and select a subtitle language
from those included on the DVD video.
SETUP
SUBTITLE
ANGLE SUBTITLE ON/OFF
PLAY
FR
FF
REPEAT
A-B
MEMORY
CLEAR
PAUSE/STEP
DOWN
UP
RANDOM
ZOOM
CLEAR
DVD
Turning subtitles on/off
Selecting a Subtitle Language
Press SUBTITLE ON/OFF during
playback.
Each press of the button turns subtitles on
or off.
(The current subtitle setting is displayed for
about 3 seconds.)
SUBTITLE
SLOW
DVD
SUBTITLE
ON/OFF
SUBTITLE
ON/OFF
You can select a subtitle language from those included on the
DVD video.
1
Press SUBTITLE during playback.
SUBTITLE
The current subtitle setting is displayed for
about 3 seconds.
Subtitle: 1 ENG On
Displayed for about 3 seconds
Subtitle : 1 ENG On
Language
The abbreviation of the language appears
instead of the language name. See the list
of languages and their abbreviations on
page 36.
Subtitles
Good evening!
2
SUBTITLE
Subtitle : 1 ENG Off
Press SUBTITLE or while the
subtitle setting is displayed on the
TV screen.
Each time you press SUBTITLE or , the
subtitle language changes to the next
language included on the DVD video.
e.g.
Subtitle : 1 ENG On
ENTER
Subtitle : 2 FRE On
Notes
Subtitle : 3 SPA On
• Some DVD videos are set to display subtitles automatically, and
you cannot turn them off even if you set the subtitle function to off.
• During some scenes, the subtitles may not appear immediately
after you select “On.”
• Some DVD videos will allow you to make subtitle selections and
turn subtitles on or off only by using the disc menu.
: Cycles backwards
To turn off the subtitle setting display
CLEAR
Press CLEAR.
Notes
• When you turn on the DVD Player or replace a disc, the DVD
Player returns to the automatic setting in the setting menu (see
pages 28 and 30).
When you select a subtitle language which is not included on the
disc, the DVD Player plays the prior language programmed on the
disc.
• During some scenes, the subtitles may not appear immediately
after you change the subtitle language by pressing / .
24
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
Selecting the Audio Language and
Sound System as a set
OPEN/
CLOSE
POWER DISPLAY DIMMER
SEARCH
2
3
4
5
6
7
8
9
1
+10
0
MENU
TOP MENU
MENU
Good morning!
Bon jour!
/
¡Buenos días!
/ /
AUDIO
You can select a preferred audio language and sound system.
ENTER
RETURN
SETUP
AUDIO
SUBTITLE
ON/OFF
ANGLE SUBTITLE
STOP
PLAY
FR
FF
REPEAT
A-B
MEMORY
CLEAR
PAUSE/STEP
DOWN
UP
SLOW
RANDOM
ZOOM
CLEAR
DVD
Selecting a Playback Audio Setting
You can select the preferred audio language and sound
system as a set from those included on the DVD video.
This function lets you temporarily change the audio language
which you selected as the automatic setting in the setting
menu (see pages 28 and 30), and choose the sound system if
the DVD video is recorded in more than one sound format.
1
AUDIO
Notes
• Some discs allow you to change audio selections only by using the
disc menu. If this is the case, press MENU and choose the
appropriate language from the selections in the disc menu.
• Some discs may have only one audio language and sound
recording system set and you cannot change this selection.
• When you turn on the DVD Player or replace a disc, the DVD
Player returns to the automatic setting in the setting menu (see
page 28).
Press AUDIO during playback.
To turn off the audio setting display
The current audio setting is displayed for
about 3 seconds.
CLEAR
Press CLEAR.
Audio language
Sound system
Audio channel
Audio: 1 ENG PCM 2CH
Audio OUT Select : Bitstream
See “Notes” in
Step 2.
The abbreviation of the language appears.
Refer to the list of languages on page 36.
2
AUDIO
Press AUDIO or while the audio
setting is displayed on the TV
screen.
Each time you press AUDIO or , the
language and audio recording system set
changes.
e.g.
A u d i o : 1 ENG
5.1CH
VCD
Selecting Sound Channels on VIDEO
CDs
ENTER
A u d i o : 2 ENG PCM 2CH
A u d i o : 3 FRE
A VIDEO CD may have left and right sound channels which
contain sounds or languages on each channel. You can switch
these two channels to hear a preferred sound or language.
5.1CH
AUDIO
: Cycles backwards
Notes
L. R
Both the left and right
channels are heard.
The left channel is heard.
L
→
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
→
→
• Dolby Digital 5.1 Channel sound may be
displayed as “
6CH.”
• You can change the “Audio Out Select”
setting temporarily by pressing / .
Before changing the setting, read through the
explanation on “Audio Out Select” on page 32
and carefully select the setting.
During playback, press AUDIO
(repeatedly) to select the sound
channel.
R
The right channel is heard.
25
Using Information on the On-Screen
Display and the DVD Player’s Display
You can view information about a disc and its
operational status on the TV screen and the DVD Player’s
display.
CURSOR
OPEN/CLOSE
STOP
PLAY
ENTER
ACOUSTIC CONTROL
STANDBY/ON
MENU RETURN SETUP
POWER
ON
DIMMER
PAUSE
OFF
STANDBY
Note
Some DVD videos may not display the chapter number or elapsed
time.
DVD
VCD
Display
CD
Checking the Total Number of the Titles/Tracks, Current Title/Chapter/Track,
Remaining and Elapsed Time, etc.
When the disc is inserted in the DVD Player
The following information appears in the DVD Player’s display for about five seconds.
DVD video*
e.g.
Total number of titles
DISPLAY
VIDEO CD/Audio CD
e.g.
* Playback may
automatically start
depending on the DVD
video. In this case, the
information on the left
doesn’t appear.
Total number
of tracks
Total playing
time of the disc
Press DISPLAY while the disc is stopped.
Each time you press DISPLAY, the on-screen
display on the TV screen changes as follows.
Each time you press DISPLAY, the DVD Player’s
display changes as follows.
DVD video
e.g.
DVD video
e.g.
Current title number Current chapter number
Stop
Current title number Current chapter number
Operational status
Title : 2
Chapter : 1
Remaining time of
the current title
Same as above
Turns off
Elapsed time of
the current title
VIDEO CD/Audio CD
VIDEO CD/Audio CD
e.g.
e.g.
Current track number
Track : 1
Stop
Operational status
Total 0:46:30
Total playing time of
the disc
Turns off
26
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
Current track
number
Same as above
Total playing time of
the disc
Elapsed time of
the disc
OPEN/
CLOSE
POWER DISPLAY DIMMER
DISPLAY
SEARCH
2
3
4
5
6
7
8
9
1
+10
0
MENU
TOP MENU
Dimming the DVD Player’s Display
ENTER
RETURN
Press DIMMER.
To resume the original brightness, press the button again.
DISPLAY
AUDIO
SETUP
SUBTITLE
ANGLE SUBTITLE ON/OFF
STOP
PLAY
FR
FF
REPEAT
A-B
MEMORY
CLEAR
PAUSE/STEP
DOWN
UP
SLOW
RANDOM
ZOOM
Press DISPLAY during playback.
Each time you press DISPLAY, the on-screen display on
the TV screen changes as follows.
Each time you press DISPLAY, the DVD
Player’s display changes as follows.
DVD video
e.g.
Current title number
Current chapter number
Operational status
Playback mode
Elapsed time and remaining
time of the current title
Play
Elapsed Remain
Elapsed
time and remaining
Title : 3 0:10:15 0:50:45
Chapter : 2 0:03:08 0:10:24
time of the current chapter
DVD video
e.g.
Chapter Repeat
Audio : 1 ENG j 2CH
Subtitle : 12 ENG Off
Angle : 1
Remaining time of
the current title
Current title Current chapter
number
number
Current audio setting
Current subtitle setting
Current angle setting
Elapsed time of
the current title
The abbreviation of the language (e.g. ENG) appears
instead of the language name. See the list of languages
and their abbreviations on page 36.
Same as above
Bit Rate : 0
10 6.0 Mbps
Data transfer rate (Mbit/s):
The amount of picture, sound and subtitle data in the DVD
video transferred per second.
The larger the value is, the faster data is processed, but
this does not necessarily ensure better picture quality.
Same as above
Turns off.
VIDEO CD/Audio CD
e.g.
Current track number
Playback mode
VIDEO CD/Audio CD
e.g.
Remaining time of
the current track
Operational status
Elapsed time and remaining
time of the current track
Play
Elapsed Remain
Track : 3 0:01:20 0:02:00
0:05:12 0:43:00
Disc
Track Repeat
Elapsed time and remaining
time of the disc
Current track
number
Elapsed time of the
current track
Turns off.
Same as above
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
27
Function Setup
POWER DISPLAY DIMMER
Customizing the Function Settings
SEARCH
2
3
4
5
6
7
8
9
1
+10
0
MENU
2-6
ENTER
RETURN
AUDIO
1, 7
Before operating
SETUP can function even during normal playback. However, if an operation is inaccessible, a
message will appear. In this case, try again after playback is stopped.
VCD
TOP MENU
SETUP
RETURN
When you insert a DVD Video, VIDEO CD, or audio CD, the various functions
of the DVD Player will be set (reset) according to the setting menu.
You can customize this setting menu according to your preference.
DVD
OPEN/
CLOSE
SUBTITLE
ANGLE SUBTITLE ON/OFF
STOP
PLAY
FR
FF
PAUSE/STEP
DOWN
UP
SLOW
REPEAT
A-B
MEMORY
CLEAR
RANDOM
ZOOM
CD
Setting Steps
1
SETUP
Press SETUP.
The following setting menu appears.
4
Press / to change the setting,
the press ENTER.
ENTER
LANGUAGE
On-Screen Language
Disc Menu Language
Audio Language
Subtitle Language
e.g. When you change the “TV Shape” setting
to “16:9Widescreen.”
Category
symbol
ENG
ENG
ENG
--ENTER
2
ENTER
Press / to select a category
symbol for the setting you want to
change.
Further steps may be needed
depending on the item or setting.
Follow the steps described in the
explanation of each item starting
from page 30.
6
• To change the setting of other
items in the same category, repeat
steps 3 to 5.
• To change the setting of an item
in a different category, repeat
steps 2 to 5.
Setting sound output
Setting displays
Setting operational
options
4:3 LetterBox
4:3 Normal
16:9Widescreen
5
Setting languages
Setting playback picture
conditions
PICTURE
TV Shape 4:3LB
Black Level NRML
PAL/Auto * Auto
7
SETUP
To close the setting menu, press
SETUP.
To return to the previously displayed menu
RETURN
3
Press RETURN.
Press / to select the item you
want to change, then press ENTER.
ENTER
e.g. When you select “PICTURE” as the
category in step 2, then select “TV Shape”
as the item in this step.
When operating with the DVD Player
CURSOR
OPEN/CLOSE
STOP
PLAY
ENTER
ENTER
PICTURE
TV Shape 4:3LB
Black Level NRML
PAL/Auto * Auto
ACOUSTIC CONTROL
MENU RETURN SETUP
4:3 LetterBox
4:3 Normal
16:9Widescreen
DIMMER
PAUSE
2-6
1, 7
RETURN
28
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
* Not applicable for USA and Canadian models
Reference Table of the Setting Menu
Category
Symbol Menu item
Related to
Details
Page
To select a preferred language for on-screen displays
30
On-Screen Language
DVD
Disc Menu Language
DVD
To select a preferred language for disc menus
30
Audio Language
DVD
To select a preferred language for the sound track
30
Subtitle Language
DVD
To select a preferred language for subtitles
30
TV Shape
DVD
To select a picture size according to the aspect ratio of
your TV
31
Black Level
DVD
VCD
To select the black level of playback picture
31
PAL/Auto*
DVD
VCD
To select the video system of a disc
31
Audio Out Select
DVD
VCD
To select a sound signal conversion method according to
your purpose and preference
32
Dynamic Range Control
DVD
To turn on or off a function that makes faint sounds
easier to hear even if you lower the volume during late
night playback
33
Karaoke Vocal
DVD
To turn on or off the vocal output during KARAOKE disc
playback
33
Extended Audio Feature
DVD
To turn on or off narration for visually impaired persons
33
On-Screen Displays
DVD
VCD
CD
To turn on or off the operational status display (Onscreen display) on the TV screen
33
OSD Background Color
DVD
VCD
CD
To select the background color for on-screen displays
33
Extended Subtitle Features
DVD
To turn on or off special subtitles for hearing impaired
persons
33
Screen Saver
DVD
To turn on or off the screen saver
33
Pause/Still
DVD
To select the resolution of still pictures (Field/Frame)
34
Parental Lock
DVD
To turn on or off the parental lock function
34
Title Stop
DVD
To turn on or off a feature that automatically stops
playback after a title has finished
35
PBC
VCD
To use the menu screen when playing a PBC-controllable
VIDEO CD
35
VCD
CD
CD
* Not applicable for USA and Canadian models
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
29
Customizing the Function Settings
Explanation of Each Item in the Language Category
Note
LANGUAGE
On-Screen Language
Disc Menu Language
Audio Language
Subtitle Language
On-Screen Language
To know the factory setting for each item, see the on-screen
illustration on the left.
ENG
ENG
ENG
---
DVD
VCD
Select an on-screen language from the following:
(Asian models) (Other models)
• English
• English
• Chinese
• French
• Malaysian
• Spanish
Disc Menu Language
Subtitle Language
CD
Select a subtitle language or no subtitle setting from the
following:
(Asian models) (Other models)
• English
• English
• Chinese
• French
• Malaysian
• Spanish
DVD
(All models)
• No Subtitles:
• Others
Select a disc menu language from the following:
(Asian models) (Other models)
• English
• English
• Chinese
• French
• Malaysian
• Spanish
• Some DVD videos may be set to display subtitles in a different
language than you selected.
• Some DVD videos allow you to change subtitle selections only by
using the disc menu. If this is the case, press MENU and choose the
appropriate subtitle language from the selection on the disc menu.
Choosing Another Language
Note
Some DVD videos may not include your pre-selected language. In this
case, the DVD Player automatically displays disc menus consistent
with the disc’s initial language setting.
(All models)
• Others
→ Continue to “Choosing Another
Language” in the right column of this
page.
Note
Some DVD videos may be played in a different language than you
selected because an initial language may be programmed on the disc.
30
After pressing ENTER in step 4 of “Setting Steps” on page 28:
1
Obtain the abbreviation of the preferred language from the
Table of Languages on page 36.
2
Select the first character of e.g. (USA and Canadian models)
When you select “Others” in
the abbreviation by pressing
“Disc Menu Language.”
/ .
3
Press / to move the
cursor to the next column,
then select the second
character of the abbreviation
by pressing / .
DVD
Select an audio language from the following:
(Asian models) (Other models)
• English
• English
• Chinese
• French
• Malaysian
• Spanish
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
Select this when you disable
subtitles.
→ Continue to “Choosing Another
Language” below.
Notes
(All models)
• Others
→ Continue to “Choosing Another
Language” in the right column of this
page.
Audio Language
DVD
4
Press ENTER.
LANGUAGE
On-Screen Language
Disc Menu Language
Audio Language
Subtitle Language
ENG
PA
ENG
---
English
French
Spanish
Others
Code
P A
Explanation of Each Item in the Picture Category
Note
To know the factory setting for each item, see the on-screen
illustration on the left.
PICTURE
TV Shape 4:3LB
Black Level NRML
Auto
PAL/Auto
*
TV Shape
• 4:3 Letterbox:
DVD
Select when a 4:3 TV is connected.
Displays widescreen
images with masking
bars above and below
the picture.
• 4:3 Normal:
Select when a 4:3 TV is connected.
Displays pictures
cropped to fill your TV
screen. Either or both
sides of the picture are
cut off.
PAL/Auto*
• PAL:
DVD
VCD
Select to play PAL discs.
Connect a PAL TV to view pictures.
• Auto: The DVD Player automatically detects PAL
and NTSC video systems of discs.
Connecting a multisystem TV (PAL/NTSC
compatible) is needed to view pictures.
Note
A playback picture may be distorted temporarily when the
detected signal changes between PAL and NTSC on the
disc.
• 16:9 Widescreen: Select when a 16:9 wide TV is
connected.
Notes
• The displayable picture size is preset on each DVD video. Therefore,
the playback picture of some DVD videos may not conform to the
picture size you select.
• When you play a DVD video recorded in the 4:3 picture size only, the
playback picture always appears in the 4:3 picture size regardless of
the TV shape setting.
• If you select “16:9Widescreen” and you own a 4:3 TV set, the DVD
playback picture will be horizontally distorted during playback.
Images will appear to be horizontally compressed. Make sure the TV
Shape conforms to the actual TV in use.
Black Level
DVD
VCD
Set according to your preference and the TV’s capability.
(USA, Canadian, and Asian models)
• Enhanced: Expanded black level
• Normal:
Standard black level
(Other models)
• Normal:
Standard black level
• Light:
Brighter than in “Normal”
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
* Not applicable for USA and Canadian models
31
Customizing the Function Settings
Explanation of Each Item in the Audio Category
Note
To know the factory setting for each item, see the on-screen
illustration on the left.
Audio Out Select
DVD
VCD
CD
• PCM:
Select when you make the digital
connection with the 2 channel digital
stereo.
The output sound format can be changed by changing
the setting of “Audio Out Select” –– the sound signal
conversion method.
This setting is related to the equipment connected to
the DVD Player’s DIGITAL OUTPUT connectors/
ANALOG OUTPUT jacks (see pages 8 and 9). For
details, see “Output Sound Conversion Table” below.
• Bitstream:
Select when you make the digital
connection with an amplifier with a
Dolby Digital/DTS/MPEG1/MPEG2*/
Dolby Pro Logic decoder.
The Dolby Digital, MPEG1, and
MPEG2* sound signals are
converted into PCM 2ch format and
output from the DIGITAL OUTPUT
connectors.
Warning
DO NOT set “Audio Out Select” to “Bitstream”
if the amplifier does not have one of the
decoders described above. If you do so, high
volume sound may be output and damage
your hearing as well as the speakers.
• Analog 2ch:
Select when you make only the
analog connection.
This setting must be made to
reproduce Dolby Pro Logic surround
sound with the analog connection.
Output Sound Conversion Table
DIGITAL OUT
ANALOG OUT
Digital output signals from the DIGITAL OUTPUT
COAXIAL/OPTICAL connectors
kHz/bit when converting Digital Signals to
Analog Signals for Analog jacks
“Audio Out Select” setting
Discs
Sound systems
Bitstream
Analog 2ch
PCM
Bitstream
48 kHz/16 bit
Same kHz/bit as the source
48 kHz/16 bit
DOLBY DIGITAL
48 kHz/16 bit
48 kHz/20 bit
Linear
48 kHz/24 bit
DVD
PCM
48 kHz/16 bit
48 kHz/16 bit
96 kHz/16 bit
No signal is
videos
output.
96 kHz/20bit
96 kHz/24 bit
No signal
Bitstream
DTS
48 kHz/16 bit
Bitstream (7.1ch) Bitstream (2ch)
MPEG2*
MPEG1
44.1 kHz/16 bit
VIDEO CDs
Same kHz/bit as the source
Linear PCM 44.1 kHz/16 bit
Audio CDs
Bitstream
DTS
“Audio Out Select” setting
Bitstream
48 kHz/20 bit
48 kHz/16 bit
Analog 2ch
48 kHz/20 bit
48 kHz/16 bit
48 kHz/20 bit
48 kHz/20 bit
48 kHz/24 bit
48 kHz/16 bit
96 kHz/16 bit
96 kHz/20 bit
48 kHz/20 bit
96 kHz/24 bit
(No signal is output.)
(No signal is output.)
PCM
48 kHz/20 bit
48 kHz/16 bit
48 kHz/20 bit
48 kHz/16 bit
48 kHz/20 bit
48 kHz/16 bit
44.1 kHz/16 bit
44.1 kHz/16 bit
(Noise is output.)
* Not applicable for USA and Canadian models
32
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
Explanation of Each Item in the Display Category
DISPLAY
On-Screen Displays
OSD Background Color
Extended Subtitle Features
Screen Saver
Dynamic Range Control
• Off:
• On:
DVD
Note
To know the factory setting for each item, see the above on-screen
illustration.
Full dynamic range is maintained.
Dynamic range is reduced.
On-Screen displays
Notes
• This function works only with playback of Dolby Digital recorded
discs.
• The level of Dynamic Range Reduction may differ depending on the
DVD video.
Karaoke Vocal
On
Blue
Off
On
DVD
VCD
CD
• Off:
Operational modes are not displayed on the
TV screen.
• On:
Operational modes are displayed on the TV
screen (e.g. “PLAY”, ).
DVD
The vocal output feature is used during playback of
Dolby Digital (multichannel) recorded DVD KARAOKE
discs. This feature allows you to turn off vocal audio
tracks, or restore them for background accompaniment.
• Off:
The primary vocal is not output.
• On:
The primary vocal is output if it is recorded on
the disc.
OSD Background Color
DVD
VCD
CD
• Blue: Blue background.
• Gray: Gray background.
Extended Subtitle Features
DVD
Note
The amplifier with a Dolby Digital decoder must be connected to the
DVD Player.
Extended Audio Feature
DVD
Some DVD videos contain a narration track for visually
impaired persons. The DVD player automatically plays
the narration track by setting this item to “On.”
• Off:
The narration track is not played.
• On:
The narration track is played automatically.
Some DVD videos contain special subtitles, an
enhancement of closed captions for hearing impaired
persons. The DVD Player automatically displays these
special subtitles by setting this item to “On.”
• Off:
The extended subtitles are not displayed.
• On:
Screen Saver
• Off:
• On:
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
The extended subtitles are displayed
automatically.
DVD
The screen saver is disabled.
The screen saver is enabled.
33
Customizing the Function Settings
Explanation of Each Item in the Operation Category
Note
OPERATION
Pause/Still
Parental Lock
Title Stop
PBC
To know the factory setting for each item, see the on-screen
illustration on the left.
Auto
Off
Off
On
Pause/Still
• Auto:
• Frame:
DVD
After pressing ENTER in step 4
of “Setting Steps” on page 28,
Select for normal use.
The image can be paused without
shaking.
1
The resolution of the still pictures is
improved so that you can make a
motionless picture clearer when you
pause it.
Parental Lock
Press the number buttons to
create a personal 4-digit
security code, then press
ENTER.
OPERATION
Pause/Still
Parental Lock
Title Stop
PBC
Auto
Off
Off
On
Off
On
OPERATION
Pause/Still
Parental Lock
Title Stop
PBC
Auto
Off
Off
On
Off
On
(To reenter the security code,
before pressing ENTER, press
CLEAR then enter the security
code.)
• When you select
“Parental Lock On”
Continue to the next step.
DVD
DVD videos equipped with the parental lock function are
rated according to their content. The content allowed by
a parental lock level and the way a DVD video can be
controlled may vary from disc to disc. For example,
some discs allow you to edit out violent scenes
unsuitable for children and replace them with more
suitable scenes, or lock out playback of the disc
altogether.
Off:
Select to disable the parental lock feature.
Then, carry out “Further Steps” in the right
column of this page.
On:
Further Steps
Select to activate the parental lock feature or
change the settings.
Then, carry out “Further Steps” in the right
column of this page.
Security Code
• When you select
“Parental Lock Off”
The parental lock is
disabled.
2
3
Press / to select the
country whose standards
were used to rate the DVD
video.
e.g. USA and Canadian models
Press / to select the
parental lock level, then
press ENTER.
e.g. USA and Canadian models
Locked
Viewable
Note
DVD videos may or may not respond to the parental lock settings. This
is not a defect in the DVD Player. Make sure this function works with
your DVD videos.
Level8
Level7
Level6
Level5
Level4
Level3
Level2
Level1
Viewable
Level8
Level7
Level6
Level5
Level4
Level3
Level2
Level1
The parental lock is activated.
You cannot play DVD videos rated higher than the level
you select unless you cancel the parental lock function.
For example, when you select level 7, discs rated higher
than level 7 are locked out and cannot be played.
To change the parental lock level
Follow the above procedure.
34
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
To change your 4-digit security code
After selecting “On” or “Off” and pressing ENTER in step 4 of
“Setting Steps” on page 28:
1
Press STOP four times, then press ENTER.
STOP
STOP
STOP
STOP
ENTER
The 4-digit security code is cleared.
2
Press the number buttons to create a new 4-digit security
code.
3
Press ENTER.
Title Stop
DVD
• Off:
The DVD Player continues playback after
playback of a title is complete.
• On:
The DVD Player stops playback after playback
of a title is complete.
PBC
VCD
PBC is the abbreviation for Playback Control (see
“About VIDEO CDs” on page 11.)
• Off:
Select to play a PBC-featured VIDEO CD
without using the menu screen.
• On:
Select to view the menu screen when playing
a PBC-featured VIDEO CD.
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
35
Table of Languages
Table of Languages and Their Abbreviations
Abbreviation Language
of the
Language
–––
CHI (ZH)
DUT (NL)
ENG (EN)
FRE (FR)
GER (DE)
ITA (IT)
JPN (JA)
KOR (KO)
MAY (MS)
SPA (ES)
AA
AB
AF
AM
AR
AS
AY
AZ
BA
BE
BG
BH
BI
BN
BO
BR
CA
CO
CS
CY
DA
DZ
EL
36
No alternate
language
Chinese
Dutch
English
French
German
Italian
Japanese
Korean
Malay
Spanish
Afar
Abkhazian
Afrikaans
Amharic
Arabic
Assamese
Aymara
Azerbaijani
Bashkir
Belorussian
Bulgarian
Bihari
Bislama
Bengali,Bangla
Tibetan
Breton
Catalan
Corsican
Czech
Welsh
Danish
Bhutani
Greek
Abbreviation Language
of the
Language
EO
ET
EU
FA
FI
FJ
FO
FY
GA
GD
GL
GN
GU
HA
HI
HR
HU
HY
IA
IE
IK
IN
IS
IW
JI
JW
KA
KK
KL
KM
KN
KS
KU
KY
LA
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
Esperanto
Estonian
Basque
Persian
Finnish
Fiji
Faroese
Frisian
Irish
Scottish,Gaelic
Galician
Guarani
Gujarati
Hausa
Hindi
Croatian
Hungarian
Armenian
Interlingua
Interlingue
Inupiak
Indonesian
Icelandic
Hebrew
Yiddish
Javanese
Georgian
Kazakh
Greenlandic
Cambodian
Kannada
Kashmiri
Kurdish
Kirghiz
Latin
Abbreviation Language
of the
Language
LN
LO
LT
LV
MG
MI
MK
ML
MN
MO
MR
MT
MY
NA
NE
NO
OC
OM
OR
PA
PL
PS
PT
QU
RM
RN
RO
RU
RW
SA
SD
SG
SH
SI
SK
Lingala
Laotian
Lithuanian
Latvian,Lettish
Malagasy
Maori
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Maltese
Burmese
Nauru
Nepali
Norwegian
Occitan
(Afan) Oromo
Oriya
Panjabi
Polish
Pashto,Pushto
Portuguese
Quechua
Rhaeto-Romance
Kirundi
Rumanian
Russian
Kinyarwanda
Sanskrit
Sindhi
Sango
Serbo-Croatian
Singhalese
Slovak
Abbreviation Language
of the
Language
SL
SM
SN
SO
SQ
SR
SS
ST
SU
SV
SW
TA
TE
TG
TH
TI
TK
TL
TN
TO
TR
TS
TT
TW
UK
UR
UZ
VI
VO
WO
XH
YO
ZU
Slovenian
Samoan
Shona
Somali
Albanian
Serbian
Siswati
Sesotho
Sundanese
Swedish
Swahili
Tamil
Telugu
Tajik
Thai
Tigrinya
Turkmen
Tagalog
Setswana
Tongan
Turkish
Tsonga
Tatar
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapük
Wolof
Xhosa
Yoruba
Zulu
Others
Troubleshooting
Check the following guide for the possible cause of a problem before contacting service. Refer also to the respective
instruction manuals of the connected components and TV.
Symptoms
Causes
Remedies
Pages
The DVD Player doesn’t
switch on.
• The power cord is disconnected.
• Check the connection of the power cord.
10
• The main power is set to OFF.
• There is external noise in the computer
circuits of the DVD Player.
• Turn on the main power.
• Switch off the main power, then switch it
on again. If not recovered, disconnect the
power cord, then connect it again.
• Contact your nearest ONKYO service
center.
10
10
• Insert a disc. (Check that “DVD,” “VCD,” or
“CD” is lit in the DVD Player’s display.)
• See “1. Regional Restriction Codes
(Region Number)” on page 4.
• Check the playable discs.
• Place the disc with the playback side
down.
• Place the disc within the proper guide on
the disc tray.
• Eject the disc and clean it.
• Deactivate the parental lock function or
change the parental lock level.
12
• The AC fuse is blown.
The DVD Player does not
start playback.
• No disc is inserted.
• The region number of the disc does not
match that of the DVD Player.
• An unplayable disc is inserted.
• The disc is placed upside down.
DVD Player
• The disc is not placed within the disc tray
guide.
• The disc is dirty.
• The parental lock function is activated.
4
11
12
12
11
34
Brightness is unstable or
noise is visible on the
playback picture.
• Copy protection is activated.
• Connect the DVD Player directly to the TV.
Avoid connecting the DVD Player to the
TV through a VCR.
8
The playback picture is
occasionally distorted.
• The disc is dirty.
• It is in fast forward or fast reverse
playback.
• Eject the disc and clean it.
• Sometimes a small amount of picture
distortion may appear. This is not a
malfunction.
11
14
Playback doesn’t follow the
course of the disc’s
programs.
• The DVD Player is in repeat playback
mode, memory playback mode, or
random playback mode, etc.
• Resume normal playback.
19-21
The picture from the DVD
Player doesn’t appear on
the TV screen.
• The TV is not set to receive the output
signals from the DVD Player.
• The DVD Player is not properly
connected.
• Set the TV to the DVD Player’s input.
12
• Check the connections to the DVD Player.
8
No sound is reproduced.
• A wrong sound signal conversion method
(Audio Out Select) is selected.
• Check the current sound signal
conversion method, and select the right
setting for “Audio Out Select.”
• Set the TV to the DVD Player’s input.
32
• Check the connections to the DVD Player.
8, 9
• The TV is not set to receive the output
signals from the DVD Player.
• The DVD Player is not properly
connected.
Remote Controller
–
12
The buttons on the remote
controller and DVD Player
do not operate.
• Power supply fluctuations or other
abnormalities such as static electricity
may interrupt correct operation.
• Switch off the main power, then switch it
on again. If not recovered, disconnect the
power cord, then connect it again.
10
The buttons on the DVD
Player operate but the
buttons on the remote
controller do not operate.
• No batteries are inserted in the remote
controller.
• The batteries are worn out.
• The remote controller is not pointed at the
remote sensor of the DVD Player.
• The remote controller is too far from the
DVD Player.
• Insert new batteries.
7
• Replace with new batteries.
• Point the remote controller at the remote
sensor of the DVD Player.
• Operate the remote controller within 5 m
(16 feet).
7
7
7
Because the unit contains a microcomputer to provide advanced functions, it may malfunction due to external noise or static
electricity. If this happens, press the POWER switch on the unit and then press it again after about five seconds.
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
37
Specifications
DVD Player
Power supply
USA and Canadian models: AC 120 V, 60 Hz
Other models: AC 100–240 V, 50/60 Hz
Power consumption
USA and Canadian models: 21 W
Other models: 19 W
Weight
3.8 kg, 8.4 lbs.
External dimensions
435 × 91 × 300 mm (W/H/D), 17 1/8" × 3 9/16" × 11 13/16" (W/H/D)
Signal system
USA and Canadian models: Standard NTSC
Other models: PAL/3.58 NTSC
Regional restriction code
USA and Canadian area :
Australasian area :
4
South-east Asian area :
PRC :
1
3
6
Laser
Semiconductor laser, wavelength 650 nm
Frequency range (digital audio)
DVD linear sound:
Signal-to-noise ratio (digital audio)
More than 100 dB
Audio dynamic range (digital audio)
More than 96 dB
Harmonic distortion (digital audio)
Less than 0.01 %
Wow and flutter
Below measurable level (less than ±0.001 % (W.PEAK))
Operating conditions
Temperature: 5°C to 35°C (41°F to 95°F), Operation status: Horizontal
Audio CD:
48 kHz sampling 4 Hz to 22 kHz
96 kHz sampling 4 Hz to 44 kHz
4 Hz to 20 kHz
Outputs
Component video output
(Y) 1.0 V (p-p), 75 Ω, pin jack × 1
(PB)/(PR) 0.7 V (p-p), 75 Ω, pin jack × 1
Video output
1.0 V (p-p), 75 Ω, negative sync., pin jack × 1
S video output
(Y) 1.0 V (p-p), 75 Ω, negative sync., Mini DIN 4-pin × 1
(C) 0.286 V (p-p), 75 Ω
Audio output (OPTICAL)
–22.5 dBm × 1
Audio output (COAXIAL)
0.5 V (p-p), 75 Ω, pin jack × 1
Audio output (ANALOG DIRECT)
2.0 V (rms), 470 Ω, pin jack (L, R) × 1
Audio output (ACOUSTIC CONTROL)
2.0 V (rms), 470 Ω, pin jack (L, R) × 1
Audio output (MONO DIRECT)
2.0 V (rms), 470 Ω, pin jack × 1
Specifications and features are subject to change without notice.
38
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
Index to Parts and Controls
For operational instructions, see the page indicated in brackets [ ].
Rear panel
ANALOG OUTPUT
VIDEO OUTPUT
DIRECT
COMPONENT
VIDEO OUTPUT
Y
PB
S VIDEO
VIDEO
TV ( ACOUSTIC
CONTROL )
DIGITAL
OUTPUT
L
COAXIAL OPTICAL
MONO
L (DIRECT)
R
R
PR
1
2
3
1 COMPONENT VIDEO OUTPUT (Y/PB/PR) jacks [8]
2 VIDEO OUTPUT
S VIDEO connector [8]
3 VIDEO OUTPUT
VIDEO connector [8]
4 ANALOG OUTPUT
DIRECT L/R jacks [9]
4
5 6
7
8
9
6 ANALOG OUTPUT
MONO (DIRECT) jack [9]
7 DIGITAL OUTPUT
COAXIAL connector [9]
8 DIGITAL OUTPUT
OPTICAL connector [9]
9 Power cord [10]
5 ANALOG OUTPUT
TV (ACOUSTIC CONTROL) L/R jacks [8]
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
39
Index to Parts and Controls
Front panel
1
2
3
4
CURSOR
OPEN/CLOSE
STOP
PLAY
ENTER
ACOUSTIC CONTROL
STANDBY/ON
MENU RETURN SETUP
POWER
ON
DIMMER
PAUSE
OFF
STANDBY
5
7
8
9
0
A
B
C D E
F
G H I
1 Remote control sensor [7]
A
2 Display [26, 27, 41]
B
3 DVD/VIDEO CD/CD disc tray [12]
C ACOUSTIC CONTROL button/indicator [14]
4 CURSOR ( / / / )/ ENTER [10, 15, 28]
D
OPEN/CLOSE button [12, 13]
5 STANDBY indicator [7, 10]
E
STOP button [13]
6 STANDBY/ON button [10]
F
PLAY button [12]
7 POWER switch [10]
G MENU button [15]
8 DIMMER button [26, 27]
H RETURN button [28]
9 Disc indicator [12]
I SETUP button [10, 28]
0
40
6
button [18]
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
button [18]
PAUSE button [13]
Display
1
7
2
3
8
4
5 6
9
1 Operating status indicator
6 Angle icon indicator [23]
2 Title/track number indicator [26, 27]
7 Inserted disc indicator [12]
3 Chapter number indicator [26, 27]
8 Multifunctional indicator
(e.g. operating status and error messages)
4 Total playing time/remaining time/elapsed time
indicators [26, 27]
9 REPEAT indicator [19]
5 MEMORY indicator [20]
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
41
Index to Parts and Controls
Remote controller
E
1 POWER button [10]
F
2 Number buttons [16]
OPEN/
CLOSE
POWER DISPLAY DIMMER
3 MENU button [15, 16, 25]
G
1
4
/ / /
ENTER buttons [10, 15, 16, 28]
SEARCH
2
H
1
2
3
4
5
6
+10
7
8
9
0
5 RETURN button [20, 22, 28]
6 AUDIO button [25]
7 ANGLE button [23]
MENU
I
3
4
7
8
9
0
RETURN
SETUP
AUDIO
SUBTITLE
ON/OFF
ANGLE SUBTITLE
PLAY
FR
FF
A
REPEAT
A-B
B
C
MEMORY
CLEAR
(PLAY) button [12]
PAUSE/STEP
DOWN
UP
SLOW
(FR)/
(FF) buttons [14]
A REPEAT button [19]
J
STOP
9
(STOP) button [13, 35]
0
ENTER
5
6
3
8
TOP MENU
B A-B button [19]
K
C MEMORY button [20]
L
M
D CLEAR button [19–25]
N
E DISPLAY button [20, 26, 27]
F DIMMER button [27]
O
G r (OPEN/CLOSE) button [12, 13]
RANDOM
ZOOM
P
Q
D
H SEARCH button [16, 18, 21]
I TOP MENU button [15, 16]
J SETUP button [10, 28]
REMOTE CONTROLLER
RC-419DV
K SUBTITLE ON/OFF button [24]
L SUBTITLE button [24]
M
(PAUSE/STEP) button [13]
N
O
(DOWN)/
/
(UP) buttons [18, 21]
(SLOW) buttons [14]
P ZOOM button [22]
Q RANDOM button [21]
42
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
Memo
Downloaded From DvDPlayer-Manual.com Onkyo Manuals
43
Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN
Tel: 072-831-8111 Fax: 072-833-5222 http://www.onkyo-intl.com
ONKYO U.S.A. CORPORATION
18 Park Way, Upper Saddle River, N.J. 07458, U.S.A.
Tel: 201-785-2600 Fax: 201-785-2650 http://www.onkyousa.com
ONKYO EUROPE ELECTRONICS GmbH
Liegnitzerstrasse 6, 82194 Groebenzell, GERMANY
Tel: +49-8142-4401-0 Fax: +49-8142-4401-555 http://www.onkyo.net
ONKYO CHINA LIMITED
Units 2102-2107, Metroplaza Tower I, 223 Hing Fong Road, Kwai Chung,
N.T., HONG KONG Tel: 852-2429-3118 Fax: 852-2428-9039 http://www.onkyochina.com
SN 29342908
Downloaded
From DvDPlayer-Manual.com Onkyo Manuals
HOMEPAGE
http://www.onkyo.co.jp/
T0005-1
E
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement