GE VR1000 Security IFS AM Video Receiver

GE VR1000 Security IFS AM Video Receiver
GE
Security
VR1000
IFS AM Video Receiver
Overview
Standard Features
The IFS VR1000 video receiver detects an AM video signal
on one multimode optical fiber. The VR1000 utilizes manual gain control. The receiver is compatible with the IFS
VT1101M, VT1101M-AC, and VT1001 series transmitters.
Plug-and-play design ensures ease of installation. The
receiver incorporates a power status indicating LED for
monitoring proper system operation. The module is
available in a stand-alone version only.
• AM Video
• NTSC, PAL, SECAM Compatible
• Full Color Compatibility
• Utilizes Manual Gain
• Plug and Play Design for Ease of Installation
• Power Status Indicating LED to Monitor
System Performance
Application Examples
• Automatic Resettable Fuses on all Power Lines
• CCTV (Fixed Video)
• Comprehensive Lifetime Warranty
AM Video Receiver
Detects an AM video signal on one
multimode optical fiber.
CONNECTINFO Zae les Pointes - 60230 CHAMBLY - Tél. 01.30.28.90.20- Fax.01.30.28.90.29 - E-mail: [email protected] - www.connectinfo.fr
GE
Security
Specifications
North America
T 888-GE-SECURITY
888-437-3287
F 503-691-7566
E [email protected]
Asia
T 852-2907-8108
F 852-2142-5063
Australia and New Zealand
T 613-9239-1200
F 613-9239-1299
Video
Video Output: Bandwidth: Differential Gain: Differential Phase: Tilt: Signal-to-Noise Ratio (SNR): 1 volt pk-pk (75 ohms)
5 Hz - 10 MHz
<5%
<5°
<1%
60 dB typical, 54 dB minimum
Wavelength
850 nm, Multimode
Receiver Sensitivity
1 µw (-30 dBm)
Transmitter Output
Number Of Fibers
25 µw (-16 dBm)
1
Connectors
Optical: Power:
Video: Europe
T 44-113-238-1668
F 44-113-253-8121
ST
Terminal Block with Screw Clamps
BNC (Gold Plated Center-Pin)
Electrical & Mechanical
Power: Current Protection:
Circuit Board:
Size (in./cm.) (LxWxH)
Surface Mount: Shipping Weight:
Latin America
T 305-593-4301
F 305-593-4300
gesecurity.com/ifs
Specifications subject to
change without notice
10-12 VDC @ 150 mA
Automatic Resettable Solid-State Current Limiters
Meets IPC Standard
4.2 x 3.5 x 1.0 in., 10.7 x 8.9 x 2.5 cm
< 2 lbs./0.9 kg
Environmental
MTBF: Operating Temp: Storage Temp: Relative Humidity: © 2008 General Electric Company
All Rights Reserved
> 100,000 hours
-40° C to +74° C
-40° C to +85° C
0% to 95% (non-condensing)†
†May be extended to condensation conditions by adding suffix ‘–C’ to model number for conformal coating.
System Design
Agency compliance
up to 2.5 miles
(4 km)
Made in the USA
Complies with FDA Performance
Standard for Laser Products, Title 21,
Code of Federal Regulations, Subchapter J
VT1101M
VR1000
(Coax)
ifs
Video
1 Fiber
62.5/125µm MM
ifs
International
Fiber
Video
Systems
Incorporated
203.426.1180
(Coax)
Ordering Information
Multimode
62.5/125µm**
Part Number
Description
Fibers Required
Optical Pwr. Budget
Max. Distance*
VR1000
Video Receiver (850 nm)
1
14 dB
2.5 miles (4 km)
VR1000 is compatible with:
VT1101M, VT1101-AC, AND VT1001
Series Transmitters
Accessories♦
PS-12VDC 12 Volt DC Plug-in Power Supply (Included)
PS-12VDC-230 12 Volt DC Plug-in Power Supply, 230 VAC Input (Included if specified at time of order)
Options
Add ‘-C’ for Conformally Coated Printed Circuit Boards (Extra charge, consult factory)
*Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. **For 50/125 Fiber, subtract 4 dB from Optical Power Budget.
♦All accessories are third party manufactured.
CONNECTINFO Zae les Pointes - 60230 CHAMBLY - Tél. 01.30.28.90.20- Fax.01.30.28.90.29 - E-mail: [email protected] - www.connectinfo.fr
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement