Food Waste Disposers Submittal Sheet Specifications

Food Waste Disposers Submittal Sheet Specifications
Food Waste Disposers
Submittal Sheet
Specifications
This popular model offers the following
features and benefits:
• 1/2 Horsepower Heavy Duty Motor
(Quiet Dura-Drive® Induction Motor)
• We Come To You 2-Year
In-Home Limited Warranty
®
• Rugged Galvanized Steel Construction
(For Disposer Durability)
• Space-Saving Compact Design
Food Waste Disposer(s) shall be
InSinkErator Badger® 5XT™, continuous
feed, with 1/2 H.P. motor, galvanized
steel grinding elements with two
stainless steel 360° swivel lugs.
Self-service wrench.
Dishwasher
Drain
Connection
6"
125/8"
4"
Warranty:
2- Year parts and in-home service.
Continuous
On/Off Control
Wall Switch
Motor
Single Phase
HP
1/2
Volts
120
HZ
60
RPM
1725
Amp. (Avg. Load)
6.3
Time Rating
Intermittent
Lubrication
Permanently
Lubricated Upper &
Lower Bearings
Shipping
Weight (Approx.)
Sample Specification
Dimensions
Type of Feed
14 lbs.
Unit Finish
Waterborne
Grey Enamel
Overall Height
12-5/8”
Grind Chamber
Capacity
26 oz.
Motor
Protection
Manual Reset
Overload
Average
Water Usage
Approx. 1 Gallon per
Person Per Day
Average
Electrical Usage
3-4 KWh per Year
Drain
Connection
1-1/2” Cushioned
Slip Joint
Dishwasher
Drain Connection
Yes
* The complete InSinkErator warranty is included in the Care & Use
Booklet packed with each unit.
5"
65/16"
* Distance from bottom of sink to center line of disposer outlet.
Add 1/2" when stainless steel sinks are used.
** Length of tailpipe from center line of disposer outlet to end of tailpipe.
NOTE: Plumb waste line to prevent standing water in disposer motor housing.
Job Specifications
Food waste disposers can provide an environmentally responsible alternative to
transporting food waste to landfills. And they can help reduce greenhouse gas
emissions. At capable wastewater treatment plants, food waste can be recycled
to produce renewable energy. Additionally, capable wastewater treatment plants
can process food waste into fertilizer. (Check the plant in your area.)
™
1-800-558-5700
www.insinkerator.com
H833-15K-83-10
The Emerson logo is a trademark and service mark of Emerson Electric Co.
The mounting collar configuration is a trademark of Emerson Electric Co.
Quick Lock® is a registered trademark of Emerson Electric Co.
InSinkErator may make improvements and/or changes in the
specifications at any time, in its sole discretion, without notice or
obligation and further reserves the right to change or discontinue models.
© 2015 InSinkErator, InSinkErator® is a business unit of Emerson Electric Co. All Rights Reserved.
Printed in U.S.A.
PRESS COLORS
BLACK
P/N: H833-15K-83-10
Date: 10-06-2015
Notes:
Press Info:
Die #:
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement