Apex Digital MD 100 Owner`s manual

Apex Digital MD 100 Owner`s manual
Introduction
Congratulations on purchasing this high-quality Car Audio DVD player.
The development work invested in the new DVD player offers you
complete multimedia enjoyment in your vehicle. Apex Digital DVD Players
are one of the first mobile DVD Players to feature MP3 capabilities, and
also contain a number of technical highlights as well, such as:
•
•
•
•
•
•
•
DVD/VCD/CD/CD-R playback
Full function remote
AC/DC adapter
Dolby/dts Digital Out
A/V pass through for video game systems
Extended remote sensor
Cigarette lighter adapter
To achieve the best possible audio and video quality from your new DVD
player, we recommend that it is installed by an authorized dealer, and that
the proper voltage is used. This way you could obtain the full enjoyment
of the performance of your DVD Player.
Let us finally mention the aspect of your safety of others while operating
a motor vehicle with a video source. Please remember when operating a
motor vehicle with a video source, that the video source cannot be in view
of the driver. Serious injury or death may occur if the video source is in
view of the driver. Remember to follow all state and local laws while
driving. This product is designed for rear seat entertainment only.
MD - 100
A
P
E
X
D
I
G
I
T A
L
1
Safety Precautions
Safety Precautions
WARNING
FCC NOTICE:
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rule. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate
radio frequency energy and if not installed and used
in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will
not occur in a particular installation. If this equipment
does cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and
receiver.
• Connect the equipment to an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
WARNING:
Any modifications of the units on factory settings
besides setup menu are the responsibility of the user.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISQUE DE CHOC ELECTRIQUE NE
PAS OUVRIR
AVIS
WARNING: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PART INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with a arrowhead symbol within an equilateral
triangle is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
!
CAUTIO
TO PREVENT ELECTRIC SHOCK, MATCH WIDE
BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
CAUTION:
This digital video disc player employs a Laser System. To
ensure proper use of this product, please read this
owner’s manual carefully and retain for future reference.
Should the unit require maintenance, contact an
authorized service location - see warranty.
Use of control adjustment or the performance of
procedures other than those specified may result in
hazardous radiation exposure.
To prevent direct exposure to the laser beam, do no try to
open the enclosure.
Visible laser radiation when open and interlocks
defeated.
DO NOT STARE INTO THE BEAM.
In the space provided below, record the Model and Serial No. located
on the rear panel of your DVD video player.
Model No. __________________ Serial No. __________________
Retain this information for future reference.
2
A
P
E
X
D
I
G
I
T A
L
MD - 100
MD - 100
A
P
E
X
D
I
G
I
T A
L
3
Important Safety Instructions
Important Safety Instructions
CAUTION:
PLEASE READ AND OBSERVE ALL WARNINGS
AND INSTRUCTIONS GIVEN IN THIS OWNER’S
MANUAL AND THOSE MARKED ON THE UNIT.
RETAIN THIS BOOKLET FOR FUTURE
REFERENCE.
This set has been designed and manufactured to assure personal
safety. Improper use can result in electric shock or fire hazard. The
safeguards incorporated in this unit will protect you if you observe the
following procedures for installation, use and servicing. This unit is
fully transistorized and does not contain any parts that can be
repaired by the user.
DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE
EXPOSED TO DANGEROUS VOLTAGE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL ONLY.
1. Read The Owner’s Manual After Unpacking This Product.
Read the owner’s manual carefully, and follow all the operating and
other instructions.
2. Power Source
This product should be operated only from the type or power source
indicated on the marketing label. If you are not sure of the type of power
supply to your home, consult your product dealer or local power
company. For products intended to operate from battery power, or other
sources, refer to the operating instructions.
3. Ventilation
Slots and openings in the cabinet are provided for ventilation and to
ensure reliable operation of the product and to protect it from overheating. There openings must not be blocked or covered. The openings
should never be blocked by placing the product on a bed, sofa, rug or
the similar surface.
4
A
P
E
X
D
I
G
I
T A
L
MD - 100
4. Heat
The product should be situated away from heat sources such as
radiators, heat registers, stoves, or other products (including amplifiers)
that produce heat.
5. Water and Moisture
Do not use this product near water - for example, near a bath tub,
in a wet basement, or near a swimming pool.
6. Cleaning
Unplug this product from the wall outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
7. Power-cord Protection
Power-supply cords should be routed so that they are not likely to
be walked on or pinched by items placed upon or against them, paying
particular attention to cords at plugs, conveniences receptacles, and the
point where they exit from the product.
8. Overloading
Do not overload wall outlets as this can result in a risk of fire or
electric shock.
9. Lightning
Unplug it from the wall outlet. This will prevent damage to the
product due to lightning and power-line surges.
10. Object and Liquid Entry
Never push objects of any kind into this product through openings
as they may touch dangerous voltage points or short-out parts that
could result in a fire or electric shock. Never spill liquid of any kind on
the product.
11. Attachments
Do not use attachments not recommended by the product
manufacturer as they may cause hazards.
12. Disc Tray
Keep your fingers well clear of the disc tray as it is closing. It may
cause serious personal injury, or do damage to the machine.
MD - 100
A
P
E
X
D
I
G
I
T A
L
5
Important Safety Instructions
Important Safety Instructions
Continued
13. Burden
Do not place a heavy object on or step on the product. The object
may fall, causing serious personal injury and serious damage to the
product.
14. Safety Check
Upon completion of any service or repairs to this product, ask the
service technician to perform safety checks to determine that the
product is in the proper operating condition.
15. Disc
Do not use a cracked, deformed, or repaired disc. These discs are
easily broken and may cause serious personal injury and product
malfunction.
18. Replacement Parts
When replacements parts are required, be sure the service
technician has used replacement parts specified by the manufacturer or
the same substitutions may results in fire, electric shock, or other
hazards.
19. Grounding or Polarization
This product may be equipped with a polarized alternating current
line plug (a plug having one blade wider than the other). This plug will
fit into the power outlet only one way. This is a safety feature. If you are
unable to insert the plug fully into the outlet, try reversing the plug. If
the plug should still fail to fit, contact your electrician to replace your
obsolete outlet. Do not defeat the safety purpose of the polarized plug.
16. Damage Requiring Service
Unplug this product from the power port and refer servicing to
qualified service personnel under the following conditions.
a) When the power-supply cord or plug is damaged.
b) If liquid has been spilled, or objects have fallen into the
product.
c) If the product has been exposed to rain or water.
d) If the product does not operate normally by following the
operating instructions. Adjust only those controls that are
covered by the operating instructions because improper
adjustments of other controls may result in damage and will
then require extensive work by a qualified technician to restore
the product to its normal operation
f) When the product exhibits a distinct change in performance
- this indicates a need for service.
17. Servicing
Do not attempt to service this product yourself as opening or
removing covers may expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service personnel.
20. Temperature
If your car was parked in direct sunlight resulting in a considerate
rise in temperature inside the car, allow the unit to cool off before
operating it.
6
MD - 100
A
P
E
X
D
I
G
I
T A
L
MD - 100
A
P
E
X
D
I
G
I
T A
L
7
Precautions
Precautions
Handling Your DVD
■ When Shipping the DVD video player, the original shipping
carton and packing materials comes in handy. For
maximum protection, repack the unit as it was originally
packed at the factory.
■ Do not use volatile liquids, such as insect spray, near the
DVD video player. Do not leave rubber or plastic products
in contact with the DVD video player for a long time. They
will leave marks on the finish.
■ The top and rear panels of the DVD video player may
become warm after a period of use. This is not a
malfunction.
■ When the DVD video player is not in use, be sure to remove
the disc and turn off the power.
■ If you do not use the DVD video player for a long period of
time, the unit may not function properly in the future. Turn
on and use the DVD video player occasionally.
The DVD video player is a high technology, precision
device. If the optical pick-up lens and disc drive parts are
dirty or worn down, the picture quality becomes poor. To
maintain a clear picture, we recommend regular inspection
and maintenance (cleaning or parts replacement) every
1,000 hours of use depending on the operating
environment. For details, contact your nearest dealer.
Beware of Moisture Condensation
Moisture condensation damages the DVD video player.
Please read the following carefully.
Moisture may condense on the optical pick-up lens inside
this unit, one of the most crucial internal parts of the DVD
video player.
Moisture condensation occurs during the following cases:
■ • When you bring the DVD video player directly from a cold place
Where to Locate Your DVD
When you place this DVD video player near a TV, radio or
video cassette recorder (VCR), the playback picture may
become poor and the sound may be distorted. In this case,
place the DVD video player away from the TV, radio or VCR.
to a warm place.
• In summer, when you use the DVD video player in a hot and
humid place just after you move the unit from an air conditioned
room.
• When you use the DVD video player in a humid place.
Cleaning Your DVD
Use a soft, dry cloth for cleaning.
• For stubborn dirt, soak the cloth in a weak detergent
solution, wring well and wipe. Use a dry cloth to wipe it dry.
Do not use any type of solvent, such as thinner and
benzine, as they may damage the surface of the DVD video
player.
• If you use a chemical saturated cloth to clean the unit,
follow that product’s instructions.
Do not use the DVD video player when moisture
condensation may occur.
To Obtain a Clear Picture
8
A
P
E
X
D
I
G
I
T A
L
MD - 100
MD - 100
A
P
E
X
D
I
G
I
T A
L
9
Table of Content
Identification of Control
Selecting the Camera Angle/
Selecting a Language ........ 29 - 30
Introduction ...................... 1
FRONT PANEL
Safety Precautions .............. 2 - 3
Selecting Subtitles ............. 31
Important Safety Instructions
.......................................... 4 - 7
Using the On-Screen
Display .............................. 32
Precautions ........................ 8 - 9
Setting the Parental Lock ... 33 - 34
BACK PANEL
Identification of Control ...... 11
Customizing the Function
Settings ............................. 35
Remote Control ................. 12 - 13
Notes on Discs ................... 36 - 38
Connecting to a TV using a RF
Modulator..............................14-15
Troubleshooting Guide ....... 39 - 40
INSTALLATION
What is MP3 and VCD ?..... 16 - 17
Specifications ..................... 41
Playing Back a Disc .......... 18 - 19
Memo ................................. 42 - 43
Locating a Specific Title, Chapter
or Track .............................. 20 - 27
Warranty .......................... 44 - 45
Zooming a Picture .............. 28
10
A
P
E
X
D
I
G
I
T A
L
MD - 100
MOUNTING
When choosing a mounting location, the DVD unit should be stable and
in a position where sufficient cooling is available. Before mounting, attach
the supplied brackets and hardware for top or bottom mount.
Plug the supplied CLA power cord into the back of the DVD unit and run
the wire to a power point. (Some vehicles do not have accessory power
outlets. In this case, the cigarette lighter must be used.) Plug the
supplied yellow video cable into the video output of the DVD unit and plug
the other end into the video input of the monitor (not supplied). Repeat
this process with the red and white audio cords.
MD - 100
A
P
E
X
D
I
G
I
T A
L
11
Remote Control
Remote Control
OPERATING WITH THE REMOTE CONTROL
Operating DVD video player with the remote control.
PREPARING THE REMOTE CONTROL
Insert the batteries into the remote control so you can use it to operate
the DVD video player.
MD-100
1
O/C
PLAY
ON
STOP
OFF
SKIP
L-AUDIO IN-R
MENU
SKIP
O/C
MUTE
DISPLAY
SWITCH
AUDIO
SUB-T
ANGLE
TITLE
1
2
3
5
6
7
8
9
0
10+
GOTO
STOP
STEP/PAUSE
DVD/VIDEO CD/ CD PLAYER
VIDEO IN
30
30
O/C
MUTE
DISPLAY
AUDIO
SUB-T
ANGLE
1
2
5
6
7
8
9
0
10+
GOTO
STOP
STEP/PAUSE
3
PREV
PLAY/ENTER
MENU
VOL
SETUP
1
2
4
SWITCH
TITLE
4
NEXT
SLOW
ZOOM
REPEAT
A-B REP
The remote control must be pointed at the
remote sensor, in order for the DVD player to
function correctly.
PREV
PLAY/ENTER
NEXT
MENU
VOL
SLOW
SETUP
ZOOM
Open the cover.
REPEAT
A-B REP
Distance: Maximum of 7 m from the front of the
remote sensor.
Angle: Approximately 30˚ from each direction.
Insert batteries (AA size).
Make sure to match the + and - on
the batteries to the marks inside the
battery compartment.
3
*Please do not place the remote sensor towards
any strong light source such as direct sunlight or
illumination.
OPERATING DVD VIDEO PLAYER WITH THE EXTENDED
REMOTE SENSOR
Plug the jack (male) of the extended remote sensor into the jack
(female) of the real panel of the DVD video player. The extended
remote sensor should be placed on dash board or central console.
NOTICE
• The remote control should be aimed directly towards the remote sensor of
the DVD video player.
• Avoid dropping the remote control.
• The extended remote sensor is usually used in the car.
12
A
P
E
X
D
I
G
I
T A
L
MD - 100
Close the cover.
NOTICE
Follow instructions below because incorrect use of batteries might cause
them to leak or corrode.
• Do not place the batteries in the wrong direction.
• It is dangerous to charge/heat/open or short-circuit the batteries.
• Do not leave dead batteries or mix old/new batteries in the remote control.
• When not using the remote control for a long duration of time, remove the
batteries.
• When difficulties occur, with the remote control, or if the operating range
becomes reduced, then replace the batteries.
• If leakage from the battery occurs, wipe the battery liquid from the battery
compartment, then replace the batteries.
MD - 100
A
P
E
X
D
I
G
I
T A
L
13
Connecting to a TV using a RF
Modulator Continued
Connecting to a TV using a RF
Modulator
DVD (Back)
Many older televisions do not have the newer component-video,
composite-video, or s-video connections that optimize DVD
technology. While it would be advised to purchase a newer
television in order to take full advantage of the digital quality of
DVD’s, it is possible to connect an older television to a DVD
player. This connection requires a device called an RF modulator.
Connecting the
TV to the DVD
through the VCR
Your TV (Back)
COAXIAL
AUDIO OUT
L
1
UHF/Antenna IN
Coaxial
(L)
(R)
2
VIDEO OUT
R
Note: Many VCRs
will distort the
picture of a DVD
TV / Video Input
Conntection
player. This is NOT
a malfunction of the
DVD player or VCR.
All DVD
manufacturers are
required to install
macrovision copyright ciruritry to
prevent copying via VCR. This is
what causes the distortion.
RF-Modulator
TV /Audio Input
Conntection
L
(V)
First, it is necessary to ascertain whether or not your TV needs a
RF modulator. Look at the back of your TV. If you see three input
connectors lined up in a row, in the colors of yellow, red, and
white, then you will not need an RF modulator. If you see a
connector labeled "s-video", then you will not need an RF
modulator. If you do not have either of these connectors, then you
will need to purchase an RF modulator from the store where you
purchased your Apex Digital DVD player or other home
electronics retailers.
Older televisions use a coaxial connection, which combines all of
the video signal from an exterior source into a single line. This
line is then translated by your TV into the picture you see. The RF
modulator combines the output signals from the DVD player, or
any other device, into the coaxial connection for use by your
television.
Below are written and pictoral instructions on the proper way to
connect an RF modulator to your Apex DVD player and your TV.
Note: Not all RF Modulators are compatible
with APEX Digital players. Please see our
website for recommendations.
14
A
P
E
X
D
I
G
I
T A
L
MD - 100
1) Connect the three-terminal
composite video cable to the back
of your Apex DVD player. This
cable has three prongs, one each
in yellow, red, and white. The
yellow prong will go into the jack
labeled "Video Out"; the white
prong will go into the jack labeled
"Front-L"; the
red prong will go into the jack
labeled
"Front-R".
R
V
To TV
Antenna
(V)
(L)
(R)
Your VCR (Back)
UHF/Antenna OUT
Coaxial
back of the RF modulator. Make
sure to match up the colors
correctly.
3) Connect a coaxial cable from
the "Antenna Out" jack on the back
of your VCR to the "Antenna" jack
on the RF modulator. The coaxial
cable is the one-wire, metal-ended
type that you screw onto the VCR.
4) Connect a coaxial cable from
the "To TV" jack on the RF
modulator to the jack on the back
of your TV.
5) Make sure your TV is set to the
2) Connect the opposite end of the appropriate channel before using
your DVD player. In most cases,
composite-video cable into the
this is channel 3 or 4.
MD - 100
A
P
E
X
D
I
G
I
T A
L
15
What is MP3 and VCD?
What is MP3 and VCD?
WHAT IS MP3?
MP3 refers to a new format of music file available for playback over the
internet. Because of the popularity to download music from MP3 web
sites onto the home computer, APEX DIGITAL is the first company to offer
a home DVD player with the ability to playback CD-R discs recorder with
MP3 audio files.
PLAYING IN MP3 FORMAT
You can play an MP3 CD by different “PLAY MODE” such as:
- “FOLDER”
(normal playback)
- “FOLDER R” (repeat playback on a specific folder)
- “REP-ONE”
(repeat playback on a song)
- “SINGLE”
(playback a song only one time)
- “SHUFFLE”
(random playback)
WHEN CREATING MP3’S
When creaing MP3’s to play on your DVD player, be sure to change the
Character Settings from
Joliett to ISO 9660 in your “CD Format” properties of you favorite CD-R
burning software.
1.Insert an MP3 CD, the DVD video player will initialize the
disc and the directory (folder) will be shown on the
TV screen.
For those of you using Adaptec® Easy CD Creator® 3.5 or higher, be
sure to change the Mode Settings
from Mode 2 to Mode 1.
MP3 MENU
Note: The MD-100 DVD player will not play MP3 files on a CD-RW.
WHAT IS VCD?
Size and shape of any regular music CD with the same digital audio, plus
good video capability. It is a new video format that offers exceptional
high-end digital picture quality and smoothness, over an hour of playing
time, full CD-quality, stereo sound, and more. Using MPEG (Motion
Picture Expert Group) compression (1:30), VCD’s offer picture quality that
is far superior to the Quicktime movies you see on standard VHS tape.
P
E
X
D
I
G
I
T A
L
MD - 100
..
0
BBBBBBBBBBB
1
SSSSSSSSSSS
1
CCCCCCCCCCC
2
TTTTTTTTTTT
2
DDDDDDDDDDD
3
VVVVVVVVVVV
3
EEEEEEEEEEE
4
ZZZZZZZZZZZ
4
FFFFFFFFFFF
5
UUUUUUUUUUU
5
MP3
MP3
FOLDER
/
2.Press
to select the column of folder or column of
MP3 file or “PLAY MODE”.
Press
to select the folder on MP3 file on a list of
/
column. On “PLAY MODE”, press
to select the
/
play mode.
2) When you playback video CD, you must turn PBC OFF in order to
stop the chapter/scene.
A
0
PLAY MODE:
Note:
1) The MD-100 DVD player will only play “Comercially” made VCD
and SVCD’s. Apex does not now of any software that will produce
VCD’s or SVCD on a PC or MAC.
16
ROOT
MD - 100
A
P
E
X
D
I
G
I
T A
L
17
What is MP3 and VCD?
Continued
Playing Back A Disc
This section shows you the basics on how to play back a disc.
PLAYING IN MP3 FORMAT
CAUTION
Keep you fingers well clear of the disc tray as it is
closing. It may cause serious personal injury.
3. Press ENTER to play the MP3 file. Press
or
during
playback to skip the tracks. If you need to return to the main
directory (folder), press STOP and select the first folder on
the upper right column.
NOTICE
• The upper left column is a list showing the name of folder. The upper
right column is a list showing the name of song and the sub-folder.
• Fast Forward
or
Fast Reverse are not available during
MP3 playback.
• “
“ sign in front of a file name indicates that this is a folder, not a
MP3 file.
• “MP3” sign in front of a file name indicates that this is a MP3 file.
• During MP3 playback, you cannot access to “PLAY MODE”, folder
or songs.
• You are allowed a maximum of 11 characters for each folders or/and song.
• For “SHUFFLE” playback, you are allowed playback randomly in a
folder only.
BASIC PLAYBACK
Preparations
• When you want to play back DVD video discs or VIDEO CD, turn on the
TV and select the video input source connected to the DVD video player.
• When you want to enjoy the sound of disc from the audio system, turn
on the audio system and select the input source connected to the DVD
video player.
• Set the playback picture size according to the aspect ratio of the
connected TV via the on-screen displays.
1. Press the POWER button displayed on the front panel.
POWER
The POWER indicator will illuminate, as the DVD video player
turns on.
2. Press the OPEN/CLOSE button.
This will open the disc tray.
3. Place the disc on the disc tray.
Be sure the playback side is faced down.
4. Press PLAY/ENTER.
After closing the disc tray playback will start. As the
DVD video player is reading the disc, a menu will
appear on screen.
PLAY/ENTER
NOTICE
• To open and close the disc tray, you may only use the OPEN/CLOSE button
on the remote control or DVD video player.
• Do not force or place anything other than DVD video disc, VIDEO CD, audio
CD, or MP3 CD on the disc tray.
18
A
P
E
X
D
I
G
I
T A
L
MD - 100
MD - 100
A
P
E
X
D
I
G
I
T A
L
19
Playing Back A Disc
Continued
FOR A HIGHER QUALITY PICTURE
Occasionally, some picture noise not usually displayed with a normal
broadcast may appear on the TV screen while playing back a DVD video
disc because the high resolution pictures on these discs include a lot of
information. While the amount of noise depends on the TV you use with
this DVD video player, you should generally reduce the sharpness
adjustment on your TV when viewing DVD video discs.
Playing Back A Disc
HOW TO STOP PLAYBACK
Press the STOP button.
The DVD video player is stopped.
STOP
Press the PLAY/ENTER button to replay.
Press the STOP again.
The DVD video player returns to chapter 1 or track 1.
ABOUT DVD VCD CD
DVD VCD CD icons will appear depending on the disc being played
back.
HOW TO REMOVE THE DISC
DVD: DVD video discs
VCD: VIDEO CDs
CD: Audio CDs
Press the OPEN/CLOSE button.
Wait till the disc tray is completely open before
removing any disc.
After removing the disc, press the OPEN/CLOSE button
to close the disc tray.
HOW TO START PLAYBACK FROM THE MENU SCREEN
1. Press
or the number buttons to select the title.
/ / /
Title 1
Title 2
Title 3
Title 4
O/C
NOTICE
At the completion of each movie a menu screen will appear. Be aware that
the on-screen menu may damage your TV by permanently burning that
image onto the screen. To avoid this, press the STOP button at the
completion of each movie. You may also decide to setup the SCREEN
SAVER.
ADVANCED PLAYBACK
The DVD video player allows you to playback discs at various speeds.You
may also resume playback from the location where you stopped playback.
2. Press the PLAY/ENTER button.
The DVD video player will start playback from the title selected.
PLAY/ENTER
20
A
P
E
X
D
2X
I
G
I
T A
L
MD - 100
MD - 100
4X
6X
A
Slow
Motion
Frame by
Frame
8X
P
E
X
D
I
G
I
Last
Play
T A
L
21
Playing Back A Disc
Playing Back A Disc
Continued
PLAYING IN SLOW-MOTION
A disc can also be played back in slow-motion.
PLAYING AT 2X, 4X, 6X, OR 8X THE NORMAL SPEED
You can play back a disc at 2x, 4x, 6x, or 8x the normal speed.
TV SCREEN (FORWARD)
Press the REW or FWD button during playback.
The playback speed becomes 2x the normal speed.
The playback speed changes, each time you press the REW or FWD
button.
REW: Fast reverse
FWD: Fast forward
FF 2x
FF 6x
FF 8x
NORMAL
SPEED
TV SCREEN
4x the normal speed
• Video CD, Audio CD
The reverse or forward playback
alternates between
1x, 2x, 3x, 4x speed.
6x the normal speed
8x the normal speed
TO RESUME NORMAL PLAYBACK.
Press PLAY/ENTER.
PLAY/ENTER
• The DVD video player will not playback sound and subtitles during scan
reverse and forward playback of DVD video discs. The DVD video player will
play sound during fast forward or fast reverse playback of audio CDs.
• The speeds may vary slightly from disc to disc and the 2x, 4x, 6x, and 8x
speeds are only approximate speeds.
• MP3 CD does not have this feature.
PLAYING FRAME BY FRAME
Press the STEP button during playback.
The picture will advance one frame each time you press the STEP button.
Sound is muted.
TO RESUME NORMAL PLAYBACK.
Press PLAY/ENTER.
PLAY/ENTER
PAUSE/STEP
NOTICE
• CD and MP3 CD do not have this feature.
A
P
E
X
D
I
G
I
T A
SF 4x
SF 8x
1/4 the normal speed
1/8 the normal speed
SR 4x
SR 8x
1/4 the normal speed
1/8 the normal speed
PLAY
normal speed
TV SCREEN (REVERSE)
SR 2x
PLAY
TO RESUME NORMAL PLAYBACK.
Press PLAY/ENTER.
normal speed
The playback speed becomes 1/2, 1/4, or
1/8 of the normal speed each time you
press the SLOW button. (Reverse slow
play as the same.)
PLAY/ENTER
NOTICE
• During the slow-motion playback, the sound is muted.
• CD and MP3 CD do not have this feature.
RESUMING PLAYBACK FROM THE SAME LOCATION
This DVD video player allows you to stop playback and continue
playback later from the same location on the disc.
NOTICE
22
1/2 the normal speed
1/2 the normal speed
FF 4x
2x the normal speed
SF 2x
L
MD - 100
1. Press the STOP button.
This will interrupt the playback and the DVD video player
will memorize the location where you stopped playback.
STOP
2. Press the PLAY/ENTER button.
The DVD video player will resume the playback from the
location where you stopped playback.
PLAY/ENTER
NOTICE
• The following will cancel the RESUME function:
- Unplugging the DVD video player after you stop playback.
- Ejecting the disc.
- Adjusting/changing the parental lock or selecting a different language
setting.
• On occasion depending on the disc, you may experience a difference of
location where playback resumes.
• CD and MP3 CD do not have this feature.
MD - 100
A
P
E
X
D
I
G
I
T A
L
23
Locating a Specific Title, Chapter or Track
Track 1
Track 2
Track 3
Track 4
LOCATING A TITLE
If a DVD video disc contains title numbers, you can locate a specific title
by directly selecting a title number.
Track 5
1. Press GOTO during playback.
Make sure that the space next to TITLE is highlighted.
Example of a title menu.
VIDEO CD/Audio CD
THE DVD VIDEO DISCS ARE NORMALLY DIVIDED INTO TITLES. THE
TITLES ARE SUB-DIVIDED INTO CHAPTERS. MOREOVER, VIDEO
CD, AUDIO CD and MP3 CD ARE DIVIDED INTO TRACKS. YOU CAN
CONVENIENTLY LOCATE ANY SPECIFIC TITLE, CHAPTER, OR
TRACK WITH THIS DVD VIDEO PLAYER.
LOCATING A TITLE USING THE TITLE MENU
You can locate a specific title using the title menu function, if a DVD
video disc contains a title menu.
1. Press the TITLE button.
On the TV screen, the title menu will appear.
2. Press the
you want.
Locating a Specific Title, Chapter or Track
02
TITLE:
2. Press buttons
/ / /
GOTO
/02 CHAPTER: 03/03
to select the title and chapter you want.
3. Press the corresponding number buttons for the title you want.
e.g.
2
To select title 2
TITLE
/ / / button to select the title
TITLE:
You can also directly locate a specific title by pressing its assigned
number with the number buttons.
3. Press the ENTER button.
This will cause the DVD video player to start playback from chapter 1 of
the title selected .
02
1
2
3
4
5
6
7
8
9
0
+10
/02 CHAPTER: 03/03
4. Press PLAY/ENTER.
The DVD video player starts playback
from chapter 3 of the selected title 2.
PLAY/ENTER
NOTICE
NOTICE
• You may find that some disc will not respond to this function.
• If different instructions appear on the TV screen, follow those instructions.
The instructions above are describing the basic procedure where the
procedures may vary depending on the contents of the DVD video disc.
24
A
P
E
X
D
I
G
I
T A
L
MD - 100
• You can press GOTO twice to select the time.
• You can shift the highlighted between next to TITLE and CHAPTER
by pressing
/ / / .
• Pressing the CLEAR button resets the TITLE and CHAPTER numbers.
MD - 100
A
P
E
X
D
I
G
I
T A
L
25
Locating a Specific Title, Chapter or Track
Locating a Specific Title, Chapter or Track
Continued
SWITCHING BETWEEN TWO VIDEO SOURCES
The switch button on the remote control unit is to switch
between the display of the DVD video player, and the
external device that is connected to the A/V inputs on the
front panel of the DVD video player.
THIS DVD VIDEO PLAYER ALLOWS YOU TO PLAYBACK A SPECIFIC
TITLE, CHAPTER, TRACK, OR SEGMENT REPEATEDLY. (TITLE
REPEAT, CHAPTER/TRACK REPEAT, A-B REPEAT)
SWITCH
HOW TO REPEAT A TITLE, CHAPTER, OR TRACK
1. Select the title, chapter, or track you want to repeat.
2. Press the REPEAT button.
REPEAT
The repeat mode changes, each time you press the REPEAT button.
DVD video disc
LOCATING A SPECIFIC CHAPTER OR TRACK
CHAPTER REPEAT ON
Repeats the same chapter.
TITLE REPEAT OFF
Repeats the same title.
REPEAT OFF
Resumes normal playback.
This DVD video player allows you to locate consecutive chapters
or tracks.
Press the SKIP
or
button repeatedly to
display the requested chapter or track.
SKIP
SKIP
The DVD video player starts playback from the selected chapter or track.
How to locate proceeding chapters or tracks.
• When you press the SKIP
button, the DVD video player starts
playback from the beginning of the proceeding chapter or track.
How to locate succeeding chapters or tracks.
• When you press the SKIP
button, the DVD video player starts
playback from the beginning of the succeeding chapter or track.
Notice: On some discs the titles may not display the sub-divided chapters.
26
A
P
E
X
D
I
G
I
T A
L
MD - 100
MD - 100
A
P
E
X
D
I
G
I
T A
L
27
Locating a Specific Title, Chapter or Track
Zooming a Picture
Continued
ZOOMING A PICTURE
You can zoom a picture. You can shift the zoom point as well.
HOW TO REPEAT A SPECIFIC SEGMENT
1. Press the A-B button at the beginning of the segment in which
you want to repeat playback. (point A)
A-B
2. Press the A-B button again at the end of the
segment. (point B)
The DVD video player will automatically return to point A and start to
repeat playback of the selected segment (A-B).
Press ZOOM during normal playback or slow - motion.
The DVD video player magnifies in the center of the picture.
3. Press the A-B button to cancel the A-B
repeat function.
The DVD video player will resume to normal playback.
ZOOM X 2
ZOOM
A to B
A-B
SET A
ZOOM X 4
A-B
A to B
SET B
If you press
/ / / during zoom
playback, the zoom point shifts.
A to B
TO RESUME NORMAL PLAYBACK.
Press ZOOM during zoom playback.
CANCELLED
NOTICE
• Depending on the disc, you may experience a difference between point A
and the location where playback actually resumes.
• If a segment allows for multiple camera angles, you can not set the A-B
repeat function.
• Be aware that some discs will not respond to the A-B repeat function.
• CD and MP3 CD do not have this feature.
28
A
P
E
X
D
I
G
I
T A
L
MD - 100
ZOOM
NOTICE
• When the DVD video player is turned off, or if the discs are removed, the
program item will be removed.
• Depending on the disc, the program playback may not function.
MD - 100
A
P
E
X
D
I
G
I
T A
L
29
Selecting the Camera Angle/Selecting a Language
Selecting the Camera Angle/Selecting a Language
THIS DVD VIDEO PLAYER ALLOWS YOU TO SELECT FROM
SEVERAL DIFFERENT ANGLES AND LANGUAGES.
HOW TO SELECT A PLAYBACK AUDIO SETTING
This DVD video player allows you to select a preferred language and
sound recording system from those included on the DVD video disc.
ANGLE 1
ANGLE 2
1. Press the AUDIO button during playback.
Good evening
Bonsoir
AUDIO
Buenas tardes
Selecting a language
Selecting the camera angle
HOW TO CHANGE THE CAMERA ANGLE
If the DVD video disc was recorded from multiple angles, you have the
option to change the camera angle of the scene you are watching.
AUDIO
-
1/3 : AC - 3
5.1
ENGLISH
Dolby AC-3
-
2/3 : AC - 3
5.1
ENGLISH
AUDIO
-
3/3 : AC - 3
5.1
SPANISH
AUDIO
-
1/3 : AC - 3
5.1
FRENCH
Total Audio Channels
Current Audio Position
1. Press the ANGLE button while playing back a scene recorded with
multiple angles.
• You may only press the ANGLE button when the angle icon
is flashing on the DVD display.
• Each time you press the ANGLE button, the angle will change.
AUDIO
Language
2. Press the AUDIO button again to cycle backwards.
2/2
1/2
ANGLE
NOTICE
NOTICE
• The angle function will not work on DVD video discs that do not contain
recorded multiple angles.
• During still playback, you are able to change the camera angle. However,
when you resume to normal playback, the camera angle changes to the new
settings.
• The angle icon indicator will illuminate while playing back a title that contains
at least one scene recorded from multiple angles.
30
A
P
Recording systems
This DVD video player uses the Dolby Digital, MPEG 2, and PCM recording
DTS systems. It cannot playback DVD video discs recorded in any other
recording system.
E
X
D
I
G
I
T A
L
MD - 100
• The player returns to the initial default settings, when you turn on the
DVD video player or replace a disc.
• The DVD video player plays a prior sound programmed on the disc,
when you select a sound which is not included on the disc.
MD - 100
A
P
E
X
D
I
G
I
T A
L
31
Selecting Subtitles
Using the On-Screen Display
THIS DVD VIDEO PLAYER ALLOWS YOU TO DISPLAY THE
SUBTITLES FROM THOSE INCLUDED ON THE DISC, ON TO YOUR TV
SCREEN.
Good evening
Bonsoir
YOU CAN VIEW INFORMATION ABOUT A DISC AND ITS OPERATIONAL
STATUS ON THE TV SCREEN.
CHECKING THE OPERATIONAL STATUS
You can view the current title number, track number, and total playing
time of the disc on the TV screen.
Buenas tardes
HOW TO DISPLAY SUBTITLES
You have the option to select a preferred subtitle from those included
on the DVD video disc.
Press DISPLAY during playback.
Current Title
Press the SUB-T button
during playback.
SUB-T
SUBTITLE 1
1/03
SUBTITLE 2
2/03
TITLE
0:01:30
CHAPTER
Current Chapter
01/02
Total Chapter
Total Title
TITLE
1:14:08
SUBTITLE 3
03/10
DISPLAY
REMAIN
3/03
SUBTITLE OFF
To TURN OFF the subtitles.
CHAPTER
0:00:45
ELAPSED
CHAPTER
0:16:22
REMAIN
Press the SUB-T during playback
until the subtitles disappears.
SUB-T
SUBTITLE OFF
NOTICE
TO TURN OFF THE ON-SCREEN
DISPLAY
Press DISPLAY Again.
• Due to the nature of some DVD video discs, you may not be able to turn off
the subtitles and they will appear on screen automatically.
• As you press the SUB-T button, the subtitles may not appear immediately
during some scenes.
• If the subtitles continue to show on your TV even after the DVD has been
turned off, please refer to the TV’s close caption settings.
32
A
P
E
X
D
I
G
I
T A
L
MD - 100
Total playing time of the disc is
displayed in the DVD display.
DISPLAY
MD - 100
A
P
E
X
D
I
G
I
T A
L
33
Setting the Parental Lock
Setting the Parental Lock
YOU CAN USE THE PARENTAL LOCK FUNCTION ONLY WITH DVD
VIDEO DISCS EQUIPPED WITH THE PARENTAL LOCK FEATURE.
2. Press SETUP.
The SETUP MENU appears
on the TV screen.
- - SETUP MENU - - MAIN PAGE
GENERAL SETUP
SPEAKER SETUP
DOLBY DIGITAL SETUP
PREFERENCE
SETUP
EXIT SETUP
GOTO PREFERENCES PAGE
3. Select PREFERENCE, press ENTER.
- - SETUP MENU - - MAIN PAGE
GENERAL SETUP
SPEAKER SETUP
DOLBY DIGITAL SETUP
PREFERENCE
PLAY/ENTER
EXIT SETUP
GOTO PREFERENCES PAGE
4. Select PARENTAL, press
.
T
SETTING THE PARENTAL LOCK
DVD video discs equipped with the parental lock function are rated
according to their content. The contents allowed by a parental lock level
and the way a DVD video disc can be controlled may vary from disc to
disc. For example, if the disc allowed, you could edit out violent scenes
unsuitable for children and replace them with more suitable scenes, or
lock out playback of the disc all together.
5. Select ratings, press ENTER.
PLAY/ENTER
6. Enter your password then press ENTER.
The pre-set password is 3308 .
STOP
1. Press STOP during playback.
- - - PREFERENCE PAGE - - AUDIO
1. KID SAFE
SUBTITLE
2. G
DISC MENU
3. PG
PARENTAL
4. PG-13
PASSWORD
5. PG-R
DEFAULTS
6. NC-17
7. ADULT
SET PARENTAL CONTROL
Press STOP once.
7. Press SETUP to exit setup,
press PLAY to start.
PASSWORD VERIFY PAGE
INPUT PASSWORD:
SETUP
TO CHANGE YOUR PASSWORD:
1. Follow step 4 to select password change.
2. Enter old password.
3. Enter new password.
4. Re-enter to confirm your new password.
5. Press ENTER.
6. Press SETUP.
34
A
P
E
X
D
I
G
I
T A
L
MD - 100
MD - 100
A
P
E
X
D
I
G
I
T A
L
35
Customizing the Function Settings
Continued
Notes on Discs
YOU CAN CHANGE THE DEFAULT SETTINGS TO CUSTOMIZE THE
PERFORMANCE TO YOUR PREFERENCE.
THIS SECTION SHOWS YOU HOW TO HANDLE, CLEAN, AND STORE
DISCS.
SETUP MENU
DOLBY
SPEAKER SETUP
GENERAL SETUP
PREFERENCES
DIGITAL SETUP
DISPLAYING THE SETUP MENU SCREEN
The SETUP MENU screen asks you to select a setting category from General Setup,
Speaker Setup, Dolby Digital Setup, and Preferences. The selected category will
provide you the setting details using the succeeding screen.
- - SETUP MENU - - MAIN PAGE
GENERAL SETUP
SPEAKER SETUP
DOLBY DIGITAL SETUP
PREFERENCE
EXIT SETUP
Setup Current Status
GENERAL SETUP
- - GENERAL PAGE - TV DISPLAY
TV TYPE
ANGLE MARK
T OSD LANG
AUDIO OUTPUT
CAPTION
SCR SAVER
MAIN PAGE
ENGLISH*
FRENCH
SPANISH
CHINESE
JAPANESE
ENGLISH*
FRENCH
SPANISH
CHINESE
JAPANESE
OFF
--PREFERENCE PAGE-AUDIO
T SUBTITLE
DISC MENU
PARENTAL
PASSWORD
DEFAULTS
ENGLISH*
FRENCH
SPANISH
CHINESE
JAPANESE
MAIN PAGE
GENERAL SETUP
Setup Current Status
ON
OFF*
- - SPEAKER SETUP PAGE - DOWNMIX
MAIN PAGE
SET PREFERENCES
Setup Current Status
NORMAL/PS*
NORMAL/LB
WIDE
MULTI
NTSC*
PAL
ON*
OFF
ON
DEFAULT*
1. KID SAFE
2. G
3. PG
4. PG-13
5.
6. PG-R
7. NC-17
8. ADULT*
3. Press SETUP to
normal playback.
LOUD SPEAKER SETUP
- - DOLBY DIGITAL SETUP - OP MODE
DUAL MONO
DYNAMIC
CHANGE
MAIN PAGE
ON CLEANING DISCS
• Fingerprints and dust on the disc cause picture and sound
deterioration. Wipe the disc from the center outward with a soft cloth.
Always keep the disc clean.
• If you cannot wipe off the dust with
a soft cloth, wipe the disc lightly with
a slightly moistened soft cloth and
finish with a dry cloth.
• Do not use any type of solvent such as a thinner, benzine,
commercially available cleaners or anti-static spray for vinyl LP’s. It may
damage the disc.
ENGLISH*
CHINESE
ON STORING DISCS
• Do not store discs in places subject to direct sunlight or near heat
sources.
• Do not store discs in places subject to moisture and dust such as a
bathroom or near a humidifier.
• Store discs vertically in a case. Stacking or placing objects on discs
outside of their case may cause warping.
ANALOG*
SPDIF/RAW
SPDIF/PCM
LT/RT
STEREO*
1. Press SETUP.
2. Press / / /
to select category
(highlight), then press
PLAY/ENTER.
ON HANDLING DISCS
• Do not touch the playback side of the disc.
• Do not attach paper or tape to discs.
Setup Current Status
LINE OUT*
RF REMOD
STEREO*
L MONO
R MONO
MIX MONO
*
RESET
SETUP
DOLBY DIGITAL RELATED
NOTICE
Setup Current Status
• Preset password is 3308 .
• Highlighted function will be expanded at bottom of
the screen.
• The SETUP MENU screen disappears if you press
the SETUP button while it is displayed.
36
A
P
E
X
D
I
G
I
T A
L
• Functions and menu may change without notice.
* Factory defaults
** You must press STOP to set up PREFERENCES.
MD - 100
MD - 100
A
P
E
X
D
I
G
I
T A
L
37
Notes on Discs
Notes on Discs
ABOUT THIS OWNER’S MANUAL
This owner’s manual explains the basic instructions of this DVD video
player. Some DVD video discs are produced in a manner that allows
specific or limited operation during playback. As such, the DVD video
player may not respond to all operating commands. Refer to instruction
notes of disc.
may appear on TV screen during operation.
means that the operation is not permitted by the DVD video player or
by DVD video disc.
NOTES ON REGIONAL NUMBERS
The region number of this DVD video player is 1. If region numbers, which stand
for their playable area, are printed on your DVD video disc, make sure the disc
plays region 1 or ALL . Otherwise playback will not be allowed by the player (In
this case, the DVD video player will display the message.)
NOTES ON COPYRIGHT
This product incorporates copyright protection
technology that is protected by method claims of
certain U.S. patents and other intellectual property
rights owned by Macrovision Corporation and other
rights owners. Use of this copyright protection
technology must be authorized by Macrovision
Corporation, and is intended for home and other
limited viewing uses only unless otherwise authorized
by Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
PLAYABLE DISCS
This DVD video player can play back the following discs.
Disk Mark
DVD
video
disc
Contains
Disc Size
Audio
+
Video
(moving
pictures)
12 cm
It is forbidden by law to copy, broadcast,
show, broadcast on cable, play in public,
and rent copyrighted material without
permission.
DVD video discs are copy protected, and
any recordings made from these discs will
be distorted.
Manufactured under license from Dolby Digital
Laboratories. Dolby " and the Double-D symbol are
trademarks of Dolby Laboratories. Confidential
unpublished works. c 1992-1997 Dolby
Laboratories, Inc. All rights reserved.
Maximum playback time
"
Approx. 4 hours
(double sided disc)
"
"
DTS and DTS Digital Out are trademarks of Digital
Theater System, Inc.
"
"
Approx. 8 hours
(double sided disc)
TYPE OF TV SYSTEM
Connect this DVD video player to a TV compatible with PAL/3.58 NTSC system.
Audio
+
Video
(moving
pictures)
Video
CD
Audio
CD
A
P
E
Approx. 74 minutes
8 cm
Approx. 20 minutes
12 cm
Approx. 74 minutes
8 cm
(CD single)
Approx. 20 minutes
12 cm
Approx. 600+ minutes
Audio
MP3
CD
38
12 cm
MP3
X
D
I
Audio
G
I
T A
L
MD - 100
MD - 100
A
P
E
X
D
I
G
I
T A
L
39
Troubleshooting Guide
Check the following guide for a possible correction to a problem
before contacting customer service.
Check FAQ at our website: www.apexdigitalinc.com
Symptom
The DVD video player
does not start playback
Cause
Correction
• No disc is inserted.
• Insert a disc. (Check that the
DVD or VCD or audio CD indicator
in the DVD displays is lit.)
• Insert a playback disc. (Check
the disc type and color system).
• Place the disc with the playback
side down.
• Place the disc on the disc tray
correctly inside the guide.
• Clean the disc.
• Press the SETUP button to turn
off the menu screen.
• Cancel the parental lock function
or change the parental lock level.
(The Pre-set password is 3308.)
• Turn the power on or off with the
POWER button. Or disconnect
the power plug and insert it into
the power port again.
• Check each button on the
remote, make sure it is in
normal position.
SYMPTOMS AND CORRECTION
Symptom
Cause
• The power plug is
disconnected
• Connect the power plug into the
power port securely.
No picture
• The TV is not set to
receive DVD output
• Select the appropriate video
input mode on the TV so the
picture from the DVD video player
appears on the TV screen.
• The video cable is not
connected securely
• Connect the video cable into the
jacks securely.
• The equipment
connected with the
audio cable is not set to
receive DVD signal
output.
• Select the correct input mode of
the audio receiver so you can
listen to the sound from the DVD
video player.
• The audio cables are
not connected securely.
• Connect the audio cable into the
jacks securely.
• The power of the
equipment connected
with the audio cable is
turned off.
• Turn on the equipment
connected with the audio cable.
• The setting of output
sound type is not
correct.
• Set the audio setting correctly.
The playback
picture has
occasional distortion
• The disc is dirty.
• Eject the disc and clean it.
• It is in fast forward
reverse playback.
• Sometimes a small amount of
picture distortion may appear.
This is not malfunction.
Brightness is unstable
or noises are produced
on playback pictures
The DVD video player
does not start playback
• The copy protection’s
effect.
• Connect the DVD video player to
the TV directly.
40
A
P
E
X
D
I
G
I
T A
L
• An unplayable disc is
inserted.
• The disc is placed
upside down.
• The disc is not placed
within the guide.
• The disc is dirty.
• A menu is on the
TV screen.
• The parental lock
function is set.
Correction
No power
No sound
Continued
Troubleshooting Guide
MD - 100
• Power supply
fluctuation or other
abnormalities such as
static electricity may
interrupt correct
operations.
Buttons do not work
• The batteries in the
remote control are
exhausted.
MP3 won’t read disc or
it skips
• Software use may not
be compatible with
player.
A
• Operate the remote control
within about 7m.
• Replace the batteries with new
ones.
The remote control
does not work properly
MD - 100
• Point the remote control at the
remote sensor of the DVD video
player (left side).
• The remote control is
not pointed at the
remote sensor of the
DVD video player.
• The remote control is
too far from the DVD
video player.
P
• Reburn disc. Check website for
instruction.
• Try using new editions of
software such as Adaptec’s “Easy
CD Creator” or NTI
E
X
D
I
G
I
T A
L
41
Specifications
Memo
DVD VIDEO PLAYER/OUTPUTS/SUPPLIED ACCESSORIES
Continued
DISCS AND OUTPUT SOUNDS
DVD VIDEO PLAYER
Power supply
DC 12V + 1V
Power consumption
25 Watts
Operating Temperature
5˚ C to 45˚ C (41˚ F to 113˚ F)
Mass
1 kg
DVD Video Discs
Sound recording
system
Audio setting on
the setting screen
External dimensions
200 x 85 x 300 mm (W/H/D)
Signal system
PAL/NTSC/MULTI
Laser
Semiconductor laser, wavelength 650 nm
OUTPUTS
1.0 V (p-p), 75 Ω, negative sync., pin
jack x 1
Video output
(Composite video)
Audio output (digital audio)
0.5 V (p-p), 75 Ω, pin jack x 1
Audio output (analog audio)
2.0 V (rms), 330 Ω, pin jack(L,R) x 1
INPUTS
1.0 V (p-p), 75 Ω, neg. sync., pin jack x 3
A/V Input (pass through)
ANALOG
AUDIO OUT jacks
DIGITAL
AUDIO OUT jack
1 pair
Video cable (yellow)
1
Remote control
1
AC/DC Adapter
1
Batteries (AA)
1 pair
Mounting Brackets
2
Mounting Screws
8
Extended Remote Sensor
1
Cigarette Lighter Adapter
1
MPEG 2
Sound recording
system
ANALOG
AUDIO OUT jacks
DIGITAL
AUDIO OUT jack
48kHz
Linear PCM
96kHz
SPDIF
/RAW
SPDIF
/PCM
SPDIF
/RAW
SPDIF
/RAW
SPDIF
/RAW
SPDIF
/PCM
_____
o
_____
o
_____
o
o
Dolby
Digital
bitstream
PCM
(48kHz)
MPEG 2
bitstream
PCM
(48kHz)
PCM
(48kHz)
PCM
(48kHz)
_____
VCD
Audio setting on
the setting screen
SUPPLIED ACCESSORIES
Audio cable (red and white)
Dolby Digital
CD
SPDIF
/RAW
MP3 CD
MPEG/
PCM44.
1kHz
MP3
SPDIF
/RAW
SPDIF
/PCM
SPDIF
/RAW
SPDIF
/PCM
SPDIF
/RAW
SPDIF
/PCM
_____
o
o
PCM
(44.1kHz)
SPDIF
/PCM
PCM
(44.1kHz)
PCM
(44.1kHz)
Design and specifications are subject to change without notice.
42
A
P
E
X
D
I
G
I
T A
L
MD - 100
MD - 100
A
P
E
X
D
I
G
I
T A
L
43
Warranty
Memo
Continued
ON VIDEO CD
This DVD video player supports the VIDEO CD with PBC (Version 2.0)
(PBC) is the abbreviation for Play Back Control.
You can enjoy two kinds of playbacks, depending on types of disc.
TYPE OF DISC
WHO IS COVERED?
A proof of purchase is required to receive warranty service. A sales
receipt or other document showing original date of purchase is
considered proof of purchase.
HOW TO ENJOY
VIDEO CD without PBC Audio and movie can be played back by
(VERSION 1.1)
operating the unit in the
same way as the audio CD.
VIDEO CD with PBC
(VERSION 2.0)
In addition to the operation of the VIDEO CD
without PBC, you can enjoy a playback with
interactive software and software with search
function by using the menu displayed on the
TV screen (Menu Playback). Some of the
functions described in this manual may not
work in some discs.
MPEG 1 AUDIO LAYER 3 DISC (MP3)
MP3 Audio Disc Play Back Capable
DVD VIDEO PLAYER
90 DAYS LABOR
ONE YEAR REPLACEMENT OF PARTS
MP3 audio disc can be played
back by operating the unit in
the same way as the audio CD.
WHAT IS COVERED?
Warranty repair is one (1) year limited warranty coverage:
• 90 days from original date of purchase:
- Parts and labor are included under warranty repair.
• After 90 days up to one (1) year from original date of purchase.
- Parts usage will be cover under warranty.
- Labor will be charged at a flat rate.
NOTE: If you don’t have proof of purchase, then your unit will be
considered out-of-warranty. Out-of-warranty repairs will be charged at a
flat labor rate, including any necessary parts.
WHAT IS EXCLUDED?
Your warranty does not cover:
- Labor charges for installation or setup of the product, adjustment of
customer controls on the product, and installation or repair of antenna
systems outside of the product.
- Product repair and/or part replacement because of misuse, accident,
unauthorized repair or other cause not within the control of Apex Digital,
Inc.
- A product that requires modification or adaptation to enable it to
operate in any country other than the country for which it was designed,
manufactured, approved and/or authorized, or repair of products
damaged by these modifications.
- Incidental or consequential damages resulting from the product.
(Some states do not allow the incidental or consequential damages, so
the above exclusion may not apply to you. This includes, but is not
limited to, prerecorded material, whether copyrighted or not
copyrighted.)
MAKE SURE YOU KEEP:
Please keep your sales receipt or other document showing proof of
purchase. Attach it to this owner’s manual and keep both nearby. Also
keep the original box and packing material in case you need to return
your product.
BEFORE REQUESTING SERVICE:
Please check your owner’s manual before requesting service.
Adjustments of the controls discussed there may save you a service call.
44
A
P
E
X
D
I
G
I
T A
L
MD - 100
MD - 100
A
P
E
X
D
I
G
I
T A
L
45
Warranty
D I G I TA L
DVD VIDEO PLAYER
90 DAYS LABOR
ONE YEAR REPLACEMENT OF PARTS
REMEMBER TO KEEP A RECORD OF YOUR MODEL AND SERIAL NUMBER.
MODEL #
SERIAL #
WHERE IS SERVICE AVAILABLE?
Please contact: APEX DIGITAL, INC.
2919 E. Philadelphia St., Ontario, CA 91761
(909) 930-1239
[email protected]
This warranty gives you specific legal rights. You may have other rights which vary from
state/province to state/province.
46
A
P
E
X
D
I
G
I
T A
L
MD - 100
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement