To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
FACTORY CONTACT INFORMATION
Our Vision:
We aspire to be the best in the world at developing and manufacturing coin operated games for our customers.
BAY TEK GAMES INC.
Pulaski Industrial Park
1077 East Glenbrook Drive
Pulaski, WI 54162 U.S.A. www.baytekgames.com
JOIN SERVICE FIRST NETWORK!
This free service is intended to keep you up to date on the latest game information, early notification of parts specials, pertinent technical bulletins, updates on retro fit parts, software upgrades, & much more. Log on to: www.baytekgames.com/parts
& then click on the Service First icon.
8 AM - 5 PM C.S.T. MON - FRI
SALES
P: 920.822.3951
F: 920.822.8936 [email protected]
PARTS
P: 920.822.3951 x 1101
F: 920.822.1496 [email protected]
SERVICE:
P: 920.822.3951 X 1102
F: 920.822.1496 [email protected]
All games proudly manufactured at our factory in Pulaski, Wisconsin U.S.A.
2
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
TABLE OF CONTENTS
FACTORY CONTACT INFORMATION
WELCOME TO: CRANK IT!
HOW TO PLAY
SPECIFICATIONS
SAFETY PRECAUTIONS
DIP SWITCH SETTINGS
MAIN MENU FUNCTIONS
CREDITS PER PLAY
WHEEL POSITION DIAGNOSTCS
TICKET VALUE DIAGNOSTICS
MAINBOARD WIRING
CABLE DIAGRAMS
TROUBLSHOOTING GUIDE
POWER SUPPLY DIAGNOSTICS
BILL ACCEPTOR DIAGNOSTICS
HOW TO: CHANGE ARROW POSITION
HOW TO: ADJUST WHEEL SENSOR
HOW TO: SET BRAKE TENSION
HOW TO: CHANGE TICKET PATTERN
HOW TO: REMOVE WHEEL
HOW TO: CLEAN GAME
PARTS LISTS
MAINBOARD PINOUT
MAINTENANCE LOG
TECHNICAL SUPPORT
WARRANTY
CE COMPLIANCE CERTIFICATE
29
29
30-33
34-36
37
38
39
40
14
15
16-18
19-22
23
24
25
26
27
28
5
6
2
4
6
7
8
9
9-11
12
12
13
3
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
WELCOME TO: CRANK IT!
Step up and CRANK IT!
This bright and exciting game really gets the gears turning! With fun, colorful graphics, attractive LED lighting, dot-matrix display, and a goofy, infectious audio package, Crank It is sure to entertain the little, the big, and everyone in between!
Lift up and push down the handle to spin the wheel. Boogie to the funky beat as you wait for the wheel to stop, and win tickets according to where the arrow is pointing!
Please take a moment to read through this manual and be sure to contact our factory if you have any questions, or would like some more information.
Thank you for your purchase! Your business is important to us and we hope you enjoy this game as much as we do!
Your Friends at Bay Tek Games
GAME INSPECTION
Inspect the game for any damaged, loose, or missing parts. If damage is found, please contact your freight carrier first. Then, contact Bay Tek Games
Service Department at 920.822.3951 or e-mail them at [email protected] for further assistance.
4
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
HOW TO PLAY
Crank it up…
Crank it down…
Watch the wheel spin ‘round and ‘round!
Land the arrow on a space…
And put a smile on your face!
Win BIG with Crank It!
5
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
SPECIFICATIONS
WEIGHT
WEIGHT 675 lbs.
SHIP WEIGHT 755 lbs.
POWER REQUIREMENTS
INPUT VOLTAGE RANGE 100 to 120 VAC or 220 to 240 VAC
DIMENSIONS
INPUT FREQUENCY RANGE
WIDTH 30
DEPTH 39.25”
HEIGHT 82”
50 HZ
MAX START UP
CURRENT
1.5 AMPS @ 115 VAC OPERATING TEMPERATURE
80 - 100 Degrees Fahrenheit
26.7 - 37.8 Degrees Celsius
0.75 AMPS @ 230 VAC to 60 HZ
OPERATING
CURRENT
0.7 AMPS @ 115 VAC
.35 AMPS @ 230 VAC
SAFETY PRECAUTIONS
DANGER
DO NOT perform repairs or maintenance on this game with the power ON. Unplug the unit from the wall outlet or shut off the power at the power strip located inside the game cabinet.
WARNING
Use of flammable substances can cause severe burns or serious injury.
Always use NON-FLAMMABLE solvents for cleaning. DO NOT use gasoline, kerosene, or thinners.
CAUTION
Lifting heavy objects can cause back, neck, or other injuries. Be sure adequate lifting and moving devices are available when unloading, unpacking, and moving this game.
ATTENTION
Be sure the electrical power matches the game requirements. See the serial number decal located on the back of the game cabinet. Always plug game into a grounded circuit. If the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent.
IN CASE OF EMERGENCY:
Unplug the power cord.
The power cord must be accessible at all times in case of emergency.
6
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
DIP SWITCH SETTINGS
The dip switch bank is located on the main board, inside the front door of the game.
*factory default settings are highlighted in blue
SWITCH ON
1 Double-value tickets ON
OFF
Double-value tickets OFF
2*
3
4
Standard arrow position
Jersey Shore settings ON
Brake Test ON
Lower “kiddie” arrow position
Jersey Shore settings OFF
Brake Test OFF
* See page 25 to change arrow position
7
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
DETAILED OPERATIONS
MENUS
1. Press and hold the “MENU” button inside the front door of the cabinet for
3 seconds to enter the menu
2. Tap the “MENU” button to scroll through the options
3. To choose an option, press the
“SELECT” button
4. Scroll through the menu settings with the “SELECT” button
5. To make your selection, press the
“MENU” button to scroll through the remaining menus past 6 to exit
MENU
SELECT
MENU DESCRIPTION
1
2
3
4
CREDITS PER PLAY
TICKET PATTERNS
GAME VOLUME
ATTRACT MODE VOLUME
5
WHEEL POSITION DIAGNOSTICS
6
TICKET VALUE DIAGNOSTICS
8
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
MENU 1– CREDITS PER PLAY
Scroll through the n1 menu with the “menu select” button.
Make your selection by pressing the “menu button” and scrolling through the remaining menus past n6 to exit the menu.
*Factory default settings are highlighted in BLUE .
1 2 3 4 5 6 7 8
MENU 2– TICKET PATTERNS
Scroll through the n2 menu with the “menu select” button.
Make your selection by pressing the “menu button” and scrolling through the remaining menus past n6 to exit the menu.
*Factory default settings are highlighted in BLUE .
These settings should not be changed unless the decals on the game’s wheel are also changed.
We encourage you to try the thoroughly tested standard factory ticket pattern for at least a month before deciding to change it.
Please contact our Service Department to order replacement decals if you do decide to change the ticket pattern on your game.
QUICK REFERENCE
Ticket pattern:
Credits / Price
per play:
1 2 3 4 5 6 7 8
2
$.50
2
$.50
2
$.50
4
$1.00
4
$1.00
4
$1.00
1 cr. 1 cr.
Bonus value 250 500 1000 500 1000 2000 50 100
9
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
MENU 2– TICKET PATTERNS, cont.
10
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
MENU 2– TICKET PATTERNS, cont.
11
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
MENU 3– GAME VOLUME
Scroll through the n3 menu with the “menu select” button.
Make your selection by pressing the “menu button” and scrolling through the remaining menus past n6 to exit the menu.
*Factory default settings are highlighted in BLUE .
0
(OFF)
1 2 3 4 5 6 7
This control is for the volume of the game while it is being played, or after a coin has been inserted.
A sample noise will play an example volume while scrolling through the volume levels.
MENU 4– ATTRACT VOLUME
Scroll through the n4 menu with the “menu select” button.
Make your selection by pressing the “menu button” and scrolling through the remaining menus past n6 to exit the menu.
*Factory default settings are highlighted in BLUE .
0
(OFF)
1 2 3 4 5 6 7
This control is for the volume of the game
while it is NOT being played.
This game plays fun sounds to lure customers to play.
A sample noise will play an example volume while scrolling through the volume levels.
12
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
MENU 5– WHEEL POSITION DIAGNOSTICS
While in wheel position diagnostics, turn the wheel down towards you to view the position of each space on the wheel.
The count should start at 0 on the decal seam, and count up to 24.
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24 / 0
1
13
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
MENU 6– TICKET VALUE DIAGNOSTICS
While in ticket value diagnostics, the dot-matrix display should show the same number as the wheel as you turn it towards you.
14
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
CIRCUIT BOARD WIRING
AANEWGEN1 - MAIN BOARD
AACE8866
12 Volt DC
Power In Cable
J18
AACE8858
Cable to
Speakers in
Marquee
J19
AACE8850 Colored Wheel Lights,
Counters & Wheel Solenoid
AACE8853 Low
Ticket Jumper to ticket tray
J25
J22
J8
AACE8862 Bill
Acceptor Cable
AACE8859
Matrix Com
Cable
Chase 3
AACE8850
Coin Door
J6
Chase 2
Chase 1
J16
J21
J24
AACE8860 Orange Attract
Cable to Marquee
AACE8860 Silver Attract
Cable to Marquee
AACE8860 Gold Attract
Cable to Marquee
AACE8851 Encoder
Sensor, Home Sensor &
Menu Buttons
AACE8851 Front
Illumination Lights
J9
AACE8853 Ticket
Dispenser Cable
J5
15
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
Coin Door and Bill Acceptor Cable
Bill Acceptor Cable—AACE8862
To J8
Speaker
AACE8811
To Outlet Strip
AC Voltage
To Bill Acceptor
Speaker Cable AACE8858
To J24
Front Wheel lights—AACE8856
-
+
AACE8851
-
+
Front Wheel lights—AACE8856
Ticket Dispenser / Low Ticket Switches
To J25
To J9
To J25 Connector on Main Board
MiniGen to Ticket Jumper
AACE8853
Game Ground
Ticket Tray Cable
AACE8852
To Ticket Dispenser - A5TD1
12 Volt Power
Enable Signal
Com Ground
Notch Signal
Low Ticket Switch
Wired Normally Open
A5SW200
1/4” Spacer A5SENY020
16
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
Sensors, Menu Buttons, & Wheel Solenoid
AACE8850
Ticket
Counter
Ticket and Game Counters
AACO1000
Game
Counter
AACE8850
Wheel Solenoid
AACE8869
To J22 Connector on Main Board
Whit
Gree n e
Blue
White
Green
Red
Blue
AACE8854
AACE8850
To J21 Connector on Main Board
AACE8851 AACE8851
Home Reflector
Sensor
AACB4403
AAPB2700
Menu Select
Button
Menu Button
AAPB2700
Encoder Sensor in
Front Arrow
AACB8852
17
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
Marquee & Power Supply Wiring
Matrix
Display
AACB8851
12 Volts DC to Marquee
AACE8855
AACE8859
Speaker Light Board
AACB8853
AACE8867
AACE8867 Speaker Light Board
AACB8853
12 Volts DC to Marquee
AACE8855
Small Circle Light
Board AACB8850
AACE8867
Small Circle Light
Board AACB8850
Marquee
Front of Game
AACE8860
All 3
AACE8859
Power Supply
AAPS1008
Note: Power Supply has Green and Black Wire tied together to enable power on at power up.
AACE8866 To J18 on Main Board
To J6 on
Main
Board
AACE8850 Coin Mech Cable-
AACBL4A-DOOR
18
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
TROUBLE SHOOTING GUIDE
Troubleshooting Strategy
Use common sense and a systematic method of troubleshooting to determine the exact problem, probable cause and remedy. Use the process of elimination to find the faulty component. Always check for the simple and obvious causes first such as unplugged, loose or broken wires and bad sensors, bent, pinched, stuck or jammed components.
Problem
Troubleshooting Chart
Probable Cause Remedy
No power to the game.
No lights on at all.
AC Light and Bill Acceptor on; everything else off.
(Power Supply not ON)
Dollar Bill Acceptor not functioning.
Ensure Bill Acceptor is set to
“Always Enable”
Game not coining up.
Unplugged.
Circuit breaker tripped.
Power strip faulty.
Faulty cable/power supply.
Power supply unplugged.
Rocker Switch turned off.
Power supply shutting down because of 12 V overload.
Faulty power supply.
Check for power to Bill
Acceptor.
Dirt or debris in acceptor slot.
Pinched, broken, or disconnected wiring.
Bill acceptor problem.
Check wall outlet.
Reset power strip breaker switch or building circuit breaker.
Change plug position, replace if needed.
See Power Supply diagnostic below.
Ensure unit is plugged
into power strip.
Make sure rocker switch is
set to ON.
See power supply diagnostics to isolate bad component. A bad motor or 12 volt short would cause this.
See Power Supply Diagnostic below.
Acceptor should cycle stacker at game power up. If not, check cable connections.
Refer to “How to Clean Bill Acceptor”
Or clean with bill reader cleaning card.
(A5CC9000)
Check wiring from bill acceptor
to Main Board. (AACE8862)
Repair or replace wiring harness.
Check J8 connector on Main Board
Make sure wires are secure in connectors.
Refer to troubleshooting section of dollar bill acceptor manual included with this game or the diagnostics label on the back of the unit.
Ensure game makes sound when coin switch is triggered.
Game set to large amount of credits per game.
Check coin switches—both should be wired normally open. If one switch is “closed” the other will not work either.
Check wiring to main board.
Cable AACBL4A-DOOR, AACE8850
Jackpot display will show credits inserted.
Enter N1 mode in menu to set credits per game.
19
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
TROUBLE SHOOTING GUIDE
Problem
Scoring
Issues
Probable Cause
Game shows
“Spin now” and “Hurry up”
Encoder sensor not seeing wheel spin.
Encoder sensor dirty or faulty.
Sensor is being interfered with.
Pinched, broken, or disconnected wiring.
Faulty Main Board
Game says you won even though wheel is still spinning.
Brake Assembly tension set to loose.
Remedy
Clean sensor and replace if needed.
(AACB8852)
Remove game from direct sunlight, move game to area away from neon lights or bright fluorescent lights.
Inspect wiring and replace cable if needed. AACB8852, AACE8851
Refer to Encoder Sensor Test below.
Refer to
“How to Set Brake Tension”
Wheel values, arrow pointer and payout are off slightly.
There is an adjustment on the wheel encoder sensor to calibrate the monitor change to where the arrow is pointing.
Refer to
“How to adjust wheel sensor”
Game is giving wrong tickets values.
Enter Diagnostic Menu on
MENU 6 and watch dot matrix display as you spin the wheel downward.
* Remove game from direct sunlight, move game to area away from neon lights or bright fluorescent lights.
Wheel Position does not change as you spin the wheel down.
Wheel Position does change as you spin the wheel down.
Encoder sensor unplugged, dirty or faulty.
Clean and replace if needed. (AACB8852)
Inspect wiring, refer to Encoder Sensor Test below.
If Wheel Position goes to 24, then resets to 0 and continues up again.
Encoder sensor out of adjustment.
Refer to
“How to adjust wheel sensor”
If Wheel Position increments constantly upwards up past 100.
Home Position sensor unplugged, dirty or faulty.
Clean and replace if needed. (AACB4403)
Inspect wiring.
Cable #’s AACE8854, AACE8850
Wrong ticket pattern selected. Enter menu and go to MENU 2. Verify correct ticket pattern.
Display shows
“LOW TKTS”
Ticket tray is empty.
Disconnected, loose or broken wires.
Faulty low ticket switches.
Faulty Main Board.
Refill tray with tickets, check low ticket switch.
Check connections and reseat J25 on main board. Cable #’s AACE8852, AACE8853
Switches wired normally open. Replace switches.
A5SW200
Replace main board. Part # AANEWGEN1
20
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
TROUBLE SHOOTING GUIDE
Problem
No Sound
Probable Cause
Volume set to zero in menu.
Disconnected, loose or broken wires.
Faulty speaker.
Remedy
Enter N3 in menu for game volume.
Enter N4 in menu for attract volume.
Check connections and reseat J19 on main board. Cable # AACE8858
Replace speaker. AACE8811
Meters do not work.
Game meter will click at start of next game.
Ticket meter will click for every notch the dispenser “sees”
Disconnected, loose or broken wires.
Faulty counters.
Check connections and reseat J22 on main board. Cables # AACE8850 and AACO1000
Replace counters. AACO1000
Display not lighting up
Cycle game power off, wait 10 seconds, turn back on after checking connections.
Tickets do not dispense or
Wrong amount dispensed.
Check for the correct amount of tickets adding up on
Display
Phone cable to Display is bent, pinched or unplugged.
12 Volts DC to Display
Faulty Display Board.
Tickets Owed
Display is adding up correctly
Tickets Owed
Display is not adding correctly wheel stops.
Inspect cable and sockets. Replace cable if needed. AACE8859
Verify 12 Volts DC to Display. Check and/or replace power supply if needed. AAPS1008
Replace Display Board. AACB8851
Opto-Sensor on ticket dispenser dirty.
Faulty ticket dispenser.
Notch on tickets cut too shallow.
Faulty cable. Disconnected, loose or broken wires.
Faulty Main Board.
Game is scoring too soon – before
Wrong ticket pattern selected.
Blow dust from sensor and clean with isopropyl alcohol.
Replace with working dispenser to isolate the problem. (A5TD1)
Flip tickets and load upside-down to have large cut notch toward opto sensor.
Check connectors from ticket dispensers to main board. Check for continuity. Cables AACE8852,
AACE8853
Replace main board.
Brake Assembly tension set to loose. Refer to
“How to Set Brake Tension”
Enter menu and select MENU 6.
Turn wheel downward and watch display. The display should match the wheel. If not, enter menu and select MENU 2. Verify game is set to correct ticket pattern.
21
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
TROUBLE SHOOTING GUIDE
Problem
Wheel not spinning when player moves handle.
Check for 12 Volts DC at coin up on connector.
Probable Cause
No 12 Volts on connector at coin up.
12 Volts present at connector, but solenoid still doesn’t engage.
Solenoid always stays on.
Players can continue to spin wheel after “good spin”, allowing them to nudge it to the bonus space.
Players will win a lot!
Jammed Solenoid or Springs
Pinched Cable.
Check for 12 Volts DC on cable to solenoid when game on, but not coined up in game play.
Remedy
Inspect cable from Solenoid to main board.
(J22) Cable part #’s: AACE8869, AACE8850
Replace main board. (AANEWGEN1)
Inspect cable as far into wheel as possible.
Look for broken or stretched wires.
Repair if possible.
Wheel will have to be removed to further inspect or replace.
Refer to “How to Remove Wheel”
Inspect solenoid. Ensure it operates smoothly.
Press in on silver bar. It is spring loaded and will spring back after release.
Inspect cable for smashed wire. May also have to replace main board.
If 12 Volts present, Replace main board.
(AANEWGEN1)
If no 12 Volts and solenoid is still engaged –
Wheel will have to be removed to further inspect or replace.
Refer to “How to Remove Wheel”
22
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
POWER SUPPLY DIAGNOSTICS
Check power cable into back of game.
Check AC cord from power strip in game.
Verify power strip rocker switch is ON.
(Switch cord into different socket in power strip)
Check AC connection to power supply.
Ensure Power Supply switch is set to 115V
(Some power supplies may not have this)
Ensure Power switch is on.
Check if Power Supply Fan is turning:
If Fan is turning:
Power supply is working. If game still has no 12 Volts DC, then Power Supply is faulty.
Replace Power Supply. AAPS1008
If Fan is not turning:
Turn power OFF. Disconnect all 12 volt output wires from power supply only. Turn power ON.
Fan turns. Fan does not turn
Turn power OFF. Unplug all outputs from the large PCB. Reconnect the 12 volt output wires from Power Supply to PCB main board. Turn power ON.
Fan turns. Fan does not turn. Short in PCB - Replace.
Replace Power
Supply.
(AAPS1008)
Turn power OFF. Reconnect the outputs at the
PCB one at a time. Wait
60 seconds between tests to turn power ON.
Fan turns.
Fan does not turn.
That cable is OK.
23
That cable or related component is shorted out or causing an overload. See
Jumper Cable Pin-Outs to see which component might be at fault.
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
BILL ACCEPTOR DIAGNOSTICS
Note: There are many different models and brands of Bill Acceptors that are used on redemption games. Your Bill Acceptor may differ from the unit shown.
First determine if Bill Acceptor has power:
Turn game ON—The bill acceptor should make noise as stacker cycles and
green lights on outside bezel should flash.
If NO power:
Due to the different models and brands of Bill Acceptors that are used:
Examine Bill Acceptor and determine if acceptor is 12 Volt DC or 110 VAC
Use meter to measure voltage at cable going into Bill Acceptor.
If power is OK:
Clean Bill Acceptor path to make sure there is nothing jamming unit.
Enter DBA Diagnostics Mode -
Important—Do not hold button down too long or Bill Acceptor will enter programming mode.
If accidentally entered programming mode by mistake—Unplug game and plug back in.
To enter Diagnostic Mode, press and hold the
Diagnostic Button on the back left corner of the DBA for
1-3 seconds.
The lights above the bill slot will flash the code.
ERROR CODES
Count the number of flashes on front bezel of Bill Acceptor and follow chart for repair.
FLASHING
CODE
LEDs off
LEDs on
1 flash
2 flashes
3 flashes
DESCRIPTION
CORRECTIVE
ACTION
Turn on power Power off
Acceptor is OK
Bill path blockage
Stacker jam
Un-jam bill path
Un-jam stacker
Cassette is full of bills Empty the cassette
4 flashes
5 flashes
6 flashes
Cassette is removed
Acceptor is defective
Acceptor not enabled
Replace the cassette
Replace the acceptor
See service manual
10 flashes Configuration Mode
Rapid flashing during operation
Stringing attempt detected; or sensors dirty
Power down to exit
Clean the sensors
24
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
HOW TO: Change Arrow Position
1. Slide open the cabinet window
2. Remove the nuts and washers from the
3 bolts shown and set aside
3. Move the entire arrow assembly down to the second set of bolts
4. Re-secure the lock nuts, adding a washer to the now-empty bolt
5. Close the window
6. Open the front door of the cabinet to access the main board
7. Turn dip switch 2 to the correct position
(see page 7)
25
X
WASHER
X
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
HOW TO: Adjust Wheel Sensor
Wheel sensor is located behind the arrow on wheel.
It “reads” the notch in the side of the wheel to tell the game when the panel has changed.
Part #’s:
Pointer Assy. AAPO8800
To Test:
Enter menu and go to MENU 2.
Spin Wheel slowly downward, and watch display’s wheel position readout.
The wheel position value should change as soon as next panel crosses arrow point.
To Adjust:
Turn Phillips head screw to move sensor.
Continue spinning wheel slowly downward, and watch display’s wheel position readout; adjusting screw until panel changes at arrow.
26
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
HOW TO: Set Brake Tension
To Test:
Turn off game and flip dipswitch #4 ON.
Turn game on.
The display will show “TEST BRAKE”
Use plunger handle to give the wheel a good spin, Let the wheel coast to a stop like a normal game play.
If brake is set correctly, screen will show a number between 50 - 70.
If less than 50: Loosen Brake
If greater than 70: Tighten Brake
Dip 4
To Adjust:
To loosen brake:
Loosen top nut and move 1/4 inch up. The threaded rod will drop as top nut moves up.
Spin bottom nut up tight to bracket. Tighten both nuts.
To tighten brake:
Loosen bottom nut and move 1/4 inch down. Lift up the threaded rod and spin nut down tight to bracket.
Tighten both nuts.
Re-test to verify.
Top Nut
Bottom Nut
27
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
HOW TO: Change Ticket Pattern
Slide up front plexi to access wheel by opening front door and unclipping 2
latches holding window bracket.
Push up on bracket, and roll plexi upwards.
Press Menu Button and go to MENU 6 Mode.
Slowly spin the wheel down while watching display.
This number will match the number on the wheel.
Determine which ticket pattern to purchase:
Reference ticket patterns below—Note the approximate tickets per game
for each pattern.
Purchase cover up decals.
1 Euro
Install cover up decals:
Press Menu Button and go to MENU 2 Mode.
Change number to desired Ticket Pattern as it shows on display.
Press Menu Button and go to MENU 6 Mode.
Spin wheel downward slowly one complete revolution
This number will show the new ticket value on the wheel.
Place new decal carefully over value on wheel.
Note: Be careful to not rock wheel backwards over a notch, or the position will be off.
If it does rock backward, spin wheel downward one complete revolution to allow wheel to calibrate.
Continue applying new decals carefully until wheel is complete.
28
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
HOW TO: Remove Wheel
HOW TO: Clean Game
Use a mild soap solution and a clean lint free cloth to wipe down game.
Do NOT use any cleaning solvents on the game’s graphics!
Front Plexi will slide up. (Like a roll top desk)
How to:
Open front door and unclip
2 latches holding window
bracket.
Push up on bracket, and roll plexi upwards.
Clean inside of plexi with lint free cloth or “swiffer”
duster.
29
PART #
A5PL9097
AASO8800
A5SW200
A5TD1
A5TU4400
AAVF8800
A5DE8800
A5DE8801
A5DE8802
A5DE8804
A5DE8805
A5DE8806
A5DE8807
A5DE8808
A5DE8809
A5DE8810
A5DE8811
A5DE8812
A5DE8813
A5DE8814
A5DE8815
A5DE8816
A5DE8817
A5DE8818
A5DE8819
A5DE8821
A5DE8822
AADE8824
AADE8825
AADE8826
AADE8827
AADE8828
AADE8829
AADE8830
AADE8831
AACB4403
AACB8850
AACB8851
AACB8852
AACB8853
AANEWGEN1
A5BURU075
A5CO4400
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
PARTS LIST
DESCRIPTION PART # DESCRIPTION
Wheel Engaging Solenoid A5FI9010 Filter
Low Ticket Switch AAGU4401 Wire Guard
Ticket Dispenser A5LK2000 Lock, 631password
Clear Tubing
Blue Marquee with Decals
Decal, Wheel, Front
Decal, Pointer
Decal, Wheel Right Side
AASO4010
AABK8801
Solenoid Assy for Wheel
Bottom Front Bracket with Decal
A5ME4180 Metal, Right Ticket Tray
Decal, Right Side Top
Decal, Left Side Top
Decal, Right Side Middle
Decal, Left Side Middle
Decal, Right Side Bottom
Decal, Left Side Bottom
Decal, Control Panel
Decal, Front top Door
Decal, Bottom Front, around cash box
Decal, Coin Door
Decal, Marquee, Right Side
Decal, Marquee, Left Side
Decal, Marquee, Center
Decal, Marquee Gear, Small
Decal, Marquee Gear, Large Left
Decal, Marquee Gear, Large Right
Decal, Seam
Decal, Menu Options
Decal, Ticket Pattern #1
Decal, Ticket Pattern #2
Decal, Ticket Pattern #3
Decal, Ticket Pattern #4
Decal, Ticket Pattern #5
Decal, Ticket Pattern #6
Decal, Ticket Pattern #7
Decal, Ticket Pattern #8
Reflective Sensor
Circle Light
Dot Matrix
Encoder Sensor
Speaker Light
Main Board
Big Black Rubber Bumper
Handle Grips AACE8869
30
AACE1710
AACE1715
AACE8811
AACE8850
AACE8851
AACE8852
AACE8853
AACE8854
AACE8855
AACE8856
AACE8857
AACE8858
AACE8859
AACE8860
AACE8861
AACE8862
AACE8863
AACE8864
AACE8865
AACE8866
AACE8867
A5ME4415
A5ME8800
AABK8800
A5ME8802
AADO8800
AADO8801
A5ME8806
A5ME8807
Metal, T-Handle
Metal, Wheel Shaft
Top Front Bracket with Decal
Metal, Curved Glass Rail
Front Door with Decal
Coin Door with Decal
Metal, Sliding Window Handle, Bigger
Metal, Sliding Window Bracket, Small
A5ME8810
A5ME8812
A5ME8813
A5ME8814
Metal, Handle Stop
Metal, Handle Rod for Pivot Assy
Metal, Window Brace
Metal, Side Guard on Bottom
A5ME8816
AAPB2700
Metal, Rocker Arm
Push Button with Cable
AACBLE4A-DOOR Cable, Coin Door
Cable, Door Ground
Cable, Ground Strap
Speaker with Cable
Cable, Main to Wheel
Cable, Main Board to Menu Button
Cable, Ticket Tray
Cable, Mini Gen to Ticket Jumper
Cable, Wheel Assy.
Cable, Power
Cable, Wheel Lights
Cable, Fluorescent Lights
Cable, Speaker Cable
Cable, Matrix Main
Cable, Mini Gen to Marquee
Cable, Ground to Front Door
Cable, DBA
Cable, Line Filter
Cable, Half Moon Ground
Cable, Coin Door Ground
Cable, Power Supply to Mini Gen
Cable, Marquee Jumper
Cable, Solenoid
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
PARTS PICTURES
A5ME8806 A5ME8807 A5ME8802 A5ME8800 A5TU4400
A5ME8816 A5ME8814 A5ME8813 A5ME8812 A5ME8810
31
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
PARTS PICTURES
AACBL4A-DOOR AACE1710 AACE1715 AACE8811 AACE8850
AACE8851 AACE8852 AACE8853 AACE8854 AACE8855
AACE8856 AACE8857 AACE8858 AACE8859 AACE8860
AACE8861 AACE8862 AACE8863 AACE8865 AACE8866
AACE8867 AAPB2700
32
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
DECAL PLACEMENT
33
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
MAINBOARD PINOUT
34
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
MAINBOARD PINOUT GUIDE
35
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
MAINBOARD PINOUT GUIDE
36
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
MAINTENANCE LOG
If you need to make repairs or order replacement parts, it is a good idea to keep a log.
Below is a chart you can use to track repairs and maintenance.
DATE MAINTENANCE PERFORMED PARTS ORDERED INITIALS
37
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
TECHNICAL SUPPORT
Excellent customer service is very important to Bay Tek Games! We know that keeping your games in great operating condition is important to your business. When you need us, we are here to help.
You can call us for free technical assistance, and you can count on us to have parts on-hand to support your game. When you do need us, it’s important that you know what to expect. We offer options that fit your needs.
Electronics / Circuit Boards - Repair Options
Repair & Return – If you have Circuit Board issues with your Bay Tek game, you can send the board to us and we’ll repair it right away. Most items sent to us are repaired and returned to you within two days. This option is your best value as we offer this fast turn-around service at the most reasonable price.
Advance Replacement – If you have Circuit Board issues with your Bay Tek game, but you don’t have time to send in your board in for repair, give us a call and ask for an Advance Replacement.
We’ll send you a replacement board that same day (pending availability). When you get your new board, just repackage the defective board in the same box and send it back to us. We make it easy by including a UPS Return Shipping label for you to put on the box (not available for international shipments). This is your best option when you need to get you game up and running as quickly as possible!
Spare Parts – Take matters into your own hands and purchase new spare Circuit Boards for your
Bay Tek games. Many of our games share the same main-board electronics. This means you can buy one set of spare electronics to support many of your Bay Tek games. Spare boards allow you to get your game up and running the quickest and provide you a valuable troubleshooting option.
Call our technicians to get recommendations for what you should keep on hand for spare parts!
Technical Support :
“You” are the best tool for troubleshooting! Your abilities to understand the game and your skills to repair the game are invaluable to us! If you need help, you know you can call us. It’s not easy to diagnose a game remotely by phone, but our technicians do a great job. They’ll need your help to perform some troubleshooting steps and convey to them exactly what’s happening with your game.
Returns, Credits, & Fees:
NOTICE! ALL ITEMS being sent to Bay Tek Games for repair or return, etc. require prior Return
Authorization! Bay Tek Games will provide a Product Return Form with an authorizing Ticket Number for each item to be returned. Please be certain to include this document with all shipments!
Late Fees and Non-Return Fees - Advance Replacement and Warranty Replacement items require the defective items to be returned by Bay Tek games promptly to avoid Late Fees. We would expect items to be returned with 10 working days. Late fees are invoiced monthly. Late fees are nonrefundable under any circumstance! Any item not returned within 90 days will be invoiced in full as a replacement part!
Bench Fees - Bench fees will apply for each electronic item returned to Bay Tek Games (this includes unused Advance Replacement items). This charge covers our cost to inspect, evaluate and retest each item. Please note that returned items that do not pas our tests will be charged accordingly as replacement items or advance replacements.
Restocking Fees - Unused items returned for credit will be credited minus a restocking fee. Items must be returned with in 30 days of purchase in order to qualify for any credit amount. No shipping charges will be credited.
38
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
WARRANTY
Bay Tek Games warrants to the original purchaser that all game components will be free of defects in workmanship and materials for a period of 6 months from the date of purchase. If you fill out the registration card in the cashbox of the game, Bay Tek will add another 3 months to your warranty, free of charge.
Bay Tek Games will, without charge, repair or replace defective component parts upon notification to the parts/service department while the game is under warranty.
Warranty replacement parts will be shipped immediately, via ground service, along with a Product Return Form for the return of defective parts.
Defective parts must be shipped back to Bay Tek Games unless otherwise instructed. Items not returned to Bay Tek Games will be invoiced as replacement parts.
This warranty does not apply in the event of any misuse or abuse to the product, or as a result of any unauthorized repairs or alterations. The warranty does not apply if any serial number decal is altered, defaced, or removed from its original position.
ATTENTION
In order to maintain the safety & other compliance certifications of the game, ONLY approved parts may be used. For approved parts, refer to the parts list in this manual.
Should you need your game serviced, determine the serial number from the decal placed on the front of this manual, or locate it on the back of the game. Then contact our Service Department at: 920.822.3951 or e-mail: [email protected]
NON-WARRANTY
Options and estimated charges will be provided to you for your approval.
Please remember that any items being sent to Bay Tek Games must include prior return authorization from our Parts & Service Department. This approval will include a Product Return Form which is required to be included with any incoming shipments. Repaired parts will be shipped back using the same method in which they were received. Repairs are warranted for 30 days from the date of return shipment.
39
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
40
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
41
