ESX SE 3500D car audio amplifier Owner's manual

Below you will find brief information for SE 2000D, SE 3500D. These amplifiers are designed for use with subwoofers and feature a variety of controls to allow you to adjust the sound to your liking. You can adjust the bass levels, frequency range, and phase of the subwoofer. The amplifier also features a low-pass filter to prevent high frequencies from damaging the speaker. The SE 2000D and SE 3500D come with a remote control so you can adjust the bass level from the driver’s seat.

PDF Download
Document
ESX SE 2000D & SE 3500D Owner's Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Class D amplifier
  • Up to 3500W of power
  • Low pass filter
  • Subsonic filter
  • Phase control
  • Extended bass control
  • Master/slave configuration

Frequently asked questions

Install the amplifier at a location where it will be protected from high humidity and dust. Make sure the amplifier has adequate ventilation and cooling.

Connect the RCA outputs of your headunit to the LINE INPUT RCA inputs of the amplifier using high-quality RCA cables.

You can adjust the bass levels of the SE 3500D using the SUB BOOST and FREQ RANGE controls. You can also use the bass remote to control the bass levels from the driver's seat.
Preparing document for printing…
0%